summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-03-23 18:37:22 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2022-03-23 18:37:22 -0700
commited4643521e6af8ab8ed1e467630a85884d2696cf (patch)
treef61d6b490f9e380068952f62b51a3f3c86562451 /arch/arm/boot/dts
parentb4bc93bd76d4da32600795cd323c971f00a2e788 (diff)
parentbcea9aaa4373f2ee8ea3c758b76c479dffe85822 (diff)
downloadlinux-ed4643521e6af8ab8ed1e467630a85884d2696cf.tar.bz2
Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann: "After a somewhat quiet 5.17 release, the size of the DT changes is a bit larger again. There are nine new SoC that get added, all of them related to existing platforms: - Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB - Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G tablet - Microchip Lan966 networking SoC and it evaluation board - Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus 5X and Fairphone FP3 phones - Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along with their evaluation boards - Samsung Exynos 850 phone SoC and reference board - Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone - Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived from the Samsung Exynos family. - TI K3/AM62 SoC and reference board Support for additional functionality in existing dts files is added all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91, Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and Broadcom. Samsung has a rework for its pinctrl schema that is a bit tricky and requires driver changes to be included here. A few more platforms only have smaller cleanups and DT Schema fixes, this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno. The new machines are really too many to list, but I'll do it anyway: Allwinner: - A20-Marsboard development board Amlogic: - Amediatek X96-AIR (Amlogic S905X3) - CYX A95XF3-AIR (Amlogic S905X3) - Haochuangy H96-Max (Amlogic S905X3) - Amlogic AQ222 (Amlogic S4) - OSMC Vero 4K+ (Amlogic S905D) Arm Juno: - Separate DT depending on SCMI firmware version Aspeed: - Quanta S6Q BMC (AST2600) - ASRock ROMED8HM3 (AST2500) Broadcom: - Raspberry Pi Zero 2 W Marvell MVEBU/Armada: - Ctera C200 V1 NAS (kirkwood) - Ctera C200 V2 NAS (armada-370) Mstar: - DongShanPiOne, a low-end embedded board - Miyoo Mini handheld game console NXP i.MX: - Numerous i.MX8M Mini based boards in even more variations, but none based on other SoCs this time: Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and Gateworks GW7903 Qualcomm: - Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3) - SHIFT6mq phone (Snapdragon 845) - Samsung Galaxy Book2 (Snapdragon 850) - Snapdragon 8 Gen 1 Hardware Development Kit TI OMAP: - SanCloud BeagleBone Enhanced WiFi Rockchip: - Pine64 PineNote ereader tablet (rk356x) - Bananapi-R2-Pro (rk356x) STM32: - emtrion emSBS-Argon embedded board (stm32mp157c)" * tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits) arm64: dts: n5x: drop invalid property and fix edac node name arm64: dts: fsd: Add the MCT support arm64: dts: stingray: Fix spi clock name arm64: dts: ns2: Fix spi clock name ARM: dts: rockchip: Update regulator name for PX3 ARM: dts: rockchip: Add #clock-cells value for rk805 arm64: dts: rockchip: Add #clock-cells value for rk805 arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808 arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly ARM: dts: at91: sama7g5: Add NAND support ARM: dts: at91: sama7g5: add eic node ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15 arm64: dts: lg: align pl330 node name with dtschema arm64: dts: lg: add dma-cells to pl330 node arm64: dts: juno: align pl330 node name with dtschema arm64: dts: broadcom: Fix sata nodename arm64: dts: n5x: add sdr edac support arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node dt-bindings: usb: dwc2: add disable-over-current ...
Diffstat (limited to 'arch/arm/boot/dts')
-rw-r--r--arch/arm/boot/dts/Makefile19
-rw-r--r--arch/arm/boot/dts/am335x-pdu001.dts2
-rw-r--r--arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts113
-rw-r--r--arch/arm/boot/dts/armada-370-c200-v2.dts388
-rw-r--r--arch/arm/boot/dts/armada-385-turris-omnia.dts3
-rw-r--r--arch/arm/boot/dts/armada-385.dtsi52
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts26
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts259
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts320
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts11
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts33
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts12
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts610
-rw-r--r--arch/arm/boot/dts/at91-sam9x60ek.dts8
-rw-r--r--arch/arm/boot/dts/at91-sama7g5ek.dts32
-rw-r--r--arch/arm/boot/dts/bcm2711.dtsi50
-rw-r--r--arch/arm/boot/dts/bcm2835.dtsi17
-rw-r--r--arch/arm/boot/dts/bcm2836.dtsi50
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts136
-rw-r--r--arch/arm/boot/dts/bcm2837.dtsi49
-rw-r--r--arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts76
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts8
-rw-r--r--arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi3
-rw-r--r--arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi3
-rw-r--r--arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi10
-rw-r--r--arch/arm/boot/dts/en7523-evb.dts35
-rw-r--r--arch/arm/boot/dts/en7523.dtsi138
-rw-r--r--arch/arm/boot/dts/exynos3250-artik5.dtsi10
-rw-r--r--arch/arm/boot/dts/exynos3250-monk.dts2
-rw-r--r--arch/arm/boot/dts/exynos3250-pinctrl.dtsi165
-rw-r--r--arch/arm/boot/dts/exynos3250-rinato.dts2
-rw-r--r--arch/arm/boot/dts/exynos3250.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi6
-rw-r--r--arch/arm/boot/dts/exynos4210-i9100.dts30
-rw-r--r--arch/arm/boot/dts/exynos4210-origen.dts2
-rw-r--r--arch/arm/boot/dts/exynos4210-pinctrl.dtsi226
-rw-r--r--arch/arm/boot/dts/exynos4210-smdkv310.dts4
-rw-r--r--arch/arm/boot/dts/exynos4210-trats.dts6
-rw-r--r--arch/arm/boot/dts/exynos4210-universal_c210.dts14
-rw-r--r--arch/arm/boot/dts/exynos4210.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos4412-itop-elite.dts2
-rw-r--r--arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos4412-midas.dtsi30
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi8
-rw-r--r--arch/arm/boot/dts/exynos4412-odroidx.dts2
-rw-r--r--arch/arm/boot/dts/exynos4412-origen.dts4
-rw-r--r--arch/arm/boot/dts/exynos4412-p4note.dtsi78
-rw-r--r--arch/arm/boot/dts/exynos4412-pinctrl.dtsi252
-rw-r--r--arch/arm/boot/dts/exynos4412-smdk4412.dts4
-rw-r--r--arch/arm/boot/dts/exynos4412.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5250-arndale.dts7
-rw-r--r--arch/arm/boot/dts/exynos5250-pinctrl.dtsi222
-rw-r--r--arch/arm/boot/dts/exynos5250-smdk5250.dts10
-rw-r--r--arch/arm/boot/dts/exynos5250-snow-common.dtsi27
-rw-r--r--arch/arm/boot/dts/exynos5250-snow-rev5.dts2
-rw-r--r--arch/arm/boot/dts/exynos5250-snow.dts2
-rw-r--r--arch/arm/boot/dts/exynos5250-spring.dts25
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi19
-rw-r--r--arch/arm/boot/dts/exynos5260-pinctrl.dtsi148
-rw-r--r--arch/arm/boot/dts/exynos5260-xyref5260.dts23
-rw-r--r--arch/arm/boot/dts/exynos5260.dtsi128
-rw-r--r--arch/arm/boot/dts/exynos5410-odroidxu.dts34
-rw-r--r--arch/arm/boot/dts/exynos5410-pinctrl.dtsi170
-rw-r--r--arch/arm/boot/dts/exynos5410-smdk5410.dts27
-rw-r--r--arch/arm/boot/dts/exynos5410.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos5420-arndale-octa.dts12
-rw-r--r--arch/arm/boot/dts/exynos5420-chagall-wifi.dts75
-rw-r--r--arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi691
-rw-r--r--arch/arm/boot/dts/exynos5420-klimt-wifi.dts75
-rw-r--r--arch/arm/boot/dts/exynos5420-peach-pit.dts99
-rw-r--r--arch/arm/boot/dts/exynos5420-pinctrl.dtsi194
-rw-r--r--arch/arm/boot/dts/exynos5420-smdk5420.dts19
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi26
-rw-r--r--arch/arm/boot/dts/exynos5422-odroid-core.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi6
-rw-r--r--arch/arm/boot/dts/exynos5800-peach-pi.dts99
-rw-r--r--arch/arm/boot/dts/imx28-tx28.dts2
-rw-r--r--arch/arm/boot/dts/imx28.dtsi2
-rw-r--r--arch/arm/boot/dts/imx51-ts4800.dts2
-rw-r--r--arch/arm/boot/dts/imx53-m53menlo.dts29
-rw-r--r--arch/arm/boot/dts/imx53-tx53.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6dl-plym2m.dts131
-rw-r--r--arch/arm/boot/dts/imx6dl-prtvt7.dts203
-rw-r--r--arch/arm/boot/dts/imx6dl-victgo.dts121
-rw-r--r--arch/arm/boot/dts/imx6q-tbs2910.dts2
-rw-r--r--arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi3
-rw-r--r--arch/arm/boot/dts/imx6qdl-mba6.dtsi16
-rw-r--r--arch/arm/boot/dts/imx6qdl-mba6a.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6qdl-mba6b.dtsi11
-rw-r--r--arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi13
-rw-r--r--arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi10
-rw-r--r--arch/arm/boot/dts/imx6qdl-tqma6.dtsi14
-rw-r--r--arch/arm/boot/dts/imx6qdl-tqma6a.dtsi7
-rw-r--r--arch/arm/boot/dts/imx6qdl-tqma6b.dtsi7
-rw-r--r--arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-vicut1.dtsi12
-rw-r--r--arch/arm/boot/dts/imx6qp-sabresd.dts6
-rw-r--r--arch/arm/boot/dts/imx6sx-udoo-neo.dtsi74
-rw-r--r--arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts2
-rw-r--r--arch/arm/boot/dts/imx7-colibri-aster.dtsi2
-rw-r--r--arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi2
-rw-r--r--arch/arm/boot/dts/imx7-colibri.dtsi4
-rw-r--r--arch/arm/boot/dts/imx7-mba7.dtsi2
-rw-r--r--arch/arm/boot/dts/imx7d-nitrogen7.dts2
-rw-r--r--arch/arm/boot/dts/imx7d-pico-hobbit.dts4
-rw-r--r--arch/arm/boot/dts/imx7d-pico-pi.dts4
-rw-r--r--arch/arm/boot/dts/imx7d-sdb.dts4
-rw-r--r--arch/arm/boot/dts/imx7d.dtsi86
-rw-r--r--arch/arm/boot/dts/imx7s-warp.dts4
-rw-r--r--arch/arm/boot/dts/imxrt1050-pinfunc.h993
-rw-r--r--arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts3
-rw-r--r--arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts (renamed from arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts)29
-rw-r--r--arch/arm/boot/dts/intel-ixp42x.dtsi2
-rw-r--r--arch/arm/boot/dts/iwg20d-q7-common.dtsi2
-rw-r--r--arch/arm/boot/dts/kirkwood-c200-v1.dts310
-rw-r--r--arch/arm/boot/dts/lan966x-pcb8291.dts64
-rw-r--r--arch/arm/boot/dts/lan966x.dtsi237
-rw-r--r--arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts8
-rw-r--r--arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts9
-rw-r--r--arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi41
-rw-r--r--arch/arm/boot/dts/mstar-infinity.dtsi34
-rw-r--r--arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi20
-rw-r--r--arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts25
-rw-r--r--arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts25
-rw-r--r--arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts23
-rw-r--r--arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi28
-rw-r--r--arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi5
-rw-r--r--arch/arm/boot/dts/mstar-infinity2m.dtsi17
-rw-r--r--arch/arm/boot/dts/mstar-infinity3.dtsi58
-rw-r--r--arch/arm/boot/dts/mstar-v7.dtsi9
-rw-r--r--arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts43
-rw-r--r--arch/arm/boot/dts/mt6582.dtsi128
-rw-r--r--arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts43
-rw-r--r--arch/arm/boot/dts/nuvoton-wpcm450.dtsi384
-rw-r--r--arch/arm/boot/dts/openbmc-flash-layout-64.dtsi2
-rw-r--r--arch/arm/boot/dts/openbmc-flash-layout.dtsi2
-rw-r--r--arch/arm/boot/dts/ox810se-wd-mbwe.dts4
-rw-r--r--arch/arm/boot/dts/ox810se.dtsi18
-rw-r--r--arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts132
-rw-r--r--arch/arm/boot/dts/qcom-apq8060-dragonboard.dts6
-rw-r--r--arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts3
-rw-r--r--arch/arm/boot/dts/qcom-apq8064.dtsi19
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019.dtsi4
-rw-r--r--arch/arm/boot/dts/qcom-mdm9615.dtsi3
-rw-r--r--arch/arm/boot/dts/qcom-msm8226.dtsi125
-rw-r--r--arch/arm/boot/dts/qcom-msm8660.dtsi3
-rw-r--r--arch/arm/boot/dts/qcom-msm8960-cdp.dts2
-rw-r--r--arch/arm/boot/dts/qcom-msm8960.dtsi30
-rw-r--r--arch/arm/boot/dts/qcom-pm8226.dtsi43
-rw-r--r--arch/arm/boot/dts/qcom-sdx55.dtsi4
-rw-r--r--arch/arm/boot/dts/r8a7740-armadillo800eva.dts2
-rw-r--r--arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts4
-rw-r--r--arch/arm/boot/dts/r8a7742-iwg21d-q7.dts4
-rw-r--r--arch/arm/boot/dts/r8a7742-iwg21m.dtsi2
-rw-r--r--arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts2
-rw-r--r--arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts5
-rw-r--r--arch/arm/boot/dts/r9a06g032.dtsi27
-rw-r--r--arch/arm/boot/dts/rk3188-px3-evb.dts2
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi1
-rw-r--r--arch/arm/boot/dts/rv1108-elgin-r1.dts1
-rw-r--r--arch/arm/boot/dts/rv1108-evb.dts1
-rw-r--r--arch/arm/boot/dts/s3c2416-pinctrl.dtsi60
-rw-r--r--arch/arm/boot/dts/s3c6410-mini6410.dts4
-rw-r--r--arch/arm/boot/dts/s3c64xx-pinctrl.dtsi210
-rw-r--r--arch/arm/boot/dts/s3c64xx.dtsi16
-rw-r--r--arch/arm/boot/dts/s5pv210-aquila.dts2
-rw-r--r--arch/arm/boot/dts/s5pv210-aries.dtsi40
-rw-r--r--arch/arm/boot/dts/s5pv210-fascinate4g.dts12
-rw-r--r--arch/arm/boot/dts/s5pv210-galaxys.dts16
-rw-r--r--arch/arm/boot/dts/s5pv210-pinctrl.dtsi226
-rw-r--r--arch/arm/boot/dts/sam9x60.dtsi10
-rw-r--r--arch/arm/boot/dts/sama5d2.dtsi11
-rw-r--r--arch/arm/boot/dts/sama5d3.dtsi6
-rw-r--r--arch/arm/boot/dts/sama5d4.dtsi9
-rw-r--r--arch/arm/boot/dts/sama7g5.dtsi243
-rw-r--r--arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts2
-rw-r--r--arch/arm/boot/dts/socfpga_arria10_socdk.dtsi2
-rw-r--r--arch/arm/boot/dts/socfpga_arria5_socdk.dts4
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts2
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts2
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_socdk.dts2
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_sockit.dts2
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_sodia.dts2
-rw-r--r--arch/arm/boot/dts/ste-ab8500.dtsi39
-rw-r--r--arch/arm/boot/dts/ste-ab8505.dtsi34
-rw-r--r--arch/arm/boot/dts/ste-href-ab8500.dtsi2
-rw-r--r--arch/arm/boot/dts/ste-href.dtsi25
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts27
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-codina.dts22
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-gavini.dts22
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-golden.dts22
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-janice.dts24
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-kyle.dts22
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-skomer.dts22
-rw-r--r--arch/arm/boot/dts/stih407-clock.dtsi101
-rw-r--r--arch/arm/boot/dts/stih407-family.dtsi262
-rw-r--r--arch/arm/boot/dts/stih410-b2120.dts16
-rw-r--r--arch/arm/boot/dts/stih410-b2260.dts30
-rw-r--r--arch/arm/boot/dts/stih410-clock.dtsi100
-rw-r--r--arch/arm/boot/dts/stih410.dtsi52
-rw-r--r--arch/arm/boot/dts/stih418-b2199.dts22
-rw-r--r--arch/arm/boot/dts/stih418-clock.dtsi101
-rw-r--r--arch/arm/boot/dts/stih418.dtsi38
-rw-r--r--arch/arm/boot/dts/stihxxx-b2120.dtsi22
-rw-r--r--arch/arm/boot/dts/stm32429i-eval.dts12
-rw-r--r--arch/arm/boot/dts/stm32746g-eval.dts12
-rw-r--r--arch/arm/boot/dts/stm32f429-disco.dts12
-rw-r--r--arch/arm/boot/dts/stm32f429.dtsi57
-rw-r--r--arch/arm/boot/dts/stm32f469-disco.dts16
-rw-r--r--arch/arm/boot/dts/stm32f746-disco.dts12
-rw-r--r--arch/arm/boot/dts/stm32f746.dtsi47
-rw-r--r--arch/arm/boot/dts/stm32f769-disco.dts12
-rw-r--r--arch/arm/boot/dts/stm32mp13-pinctrl.dtsi81
-rw-r--r--arch/arm/boot/dts/stm32mp131.dtsi89
-rw-r--r--arch/arm/boot/dts/stm32mp135f-dk.dts7
-rw-r--r--arch/arm/boot/dts/stm32mp15-pinctrl.dtsi94
-rw-r--r--arch/arm/boot/dts/stm32mp151.dtsi37
-rw-r--r--arch/arm/boot/dts/stm32mp153.dtsi7
-rw-r--r--arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts2
-rw-r--r--arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts2
-rw-r--r--arch/arm/boot/dts/stm32mp157a-iot-box.dts2
-rw-r--r--arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts4
-rw-r--r--arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts4
-rw-r--r--arch/arm/boot/dts/stm32mp157a-stinger96.dtsi6
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ed1.dts2
-rw-r--r--arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts53
-rw-r--r--arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi552
-rw-r--r--arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts2
-rw-r--r--arch/arm/boot/dts/stm32mp157c-odyssey.dts2
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi3
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi6
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi56
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dkx.dtsi4
-rw-r--r--arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts182
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts28
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-h3.dtsi2
-rw-r--r--arch/arm/boot/dts/sun8i-v3s.dtsi22
-rw-r--r--arch/arm/boot/dts/sunxi-h3-h5.dtsi18
-rw-r--r--arch/arm/boot/dts/tegra20-asus-tf101.dts12
-rw-r--r--arch/arm/boot/dts/tegra20-colibri.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra20-paz00.dts6
-rw-r--r--arch/arm/boot/dts/tegra20-tamonten.dtsi6
-rw-r--r--arch/arm/boot/dts/tegra30-asus-tf700t.dts2
-rw-r--r--arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra30-colibri.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra30-ouya.dts2
-rw-r--r--arch/arm/boot/dts/tegra30-pegatron-chagall.dts2
-rw-r--r--arch/arm/boot/dts/vf-colibri-eval-v3.dtsi2
253 files changed, 10325 insertions, 2318 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e41eca79c950..7c16f8a2b738 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -93,6 +93,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
bcm2837-rpi-cm3-io3.dtb \
+ bcm2837-rpi-zero-2-w.dtb \
bcm2711-rpi-400.dtb \
bcm2711-rpi-4-b.dtb \
bcm2711-rpi-cm4-io.dtb \
@@ -187,6 +188,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
da850-lego-ev3.dtb
dtb-$(CONFIG_ARCH_DIGICOLOR) += \
cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_AIROHA) += \
+ en7523-evb.dtb
dtb-$(CONFIG_ARCH_EXYNOS3) += \
exynos3250-artik5-eval.dtb \
exynos3250-monk.dtb \
@@ -221,6 +224,8 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5420-arndale-octa.dtb \
exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \
+ exynos5420-chagall-wifi.dtb \
+ exynos5420-klimt-wifi.dtb \
exynos5422-odroidhc1.dtb \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
@@ -269,7 +274,7 @@ dtb-$(CONFIG_ARCH_IXP4XX) += \
intel-ixp42x-dlink-dsm-g600.dtb \
intel-ixp42x-gateworks-gw2348.dtb \
intel-ixp43x-gateworks-gw2358.dtb \
- intel-ixp42x-netgear-wg302v2.dtb \
+ intel-ixp42x-netgear-wg302v1.dtb \
intel-ixp42x-arcom-vulcan.dtb \
intel-ixp42x-gateway-7001.dtb
dtb-$(CONFIG_ARCH_KEYSTONE) += \
@@ -281,6 +286,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-b3.dtb \
kirkwood-blackarmor-nas220.dtb \
+ kirkwood-c200-v1.dtb \
kirkwood-cloudbox.dtb \
kirkwood-d2net.dtb \
kirkwood-db-88f6281.dtb \
@@ -735,6 +741,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
dtb-$(CONFIG_SOC_IMX7ULP) += \
imx7ulp-com.dtb \
imx7ulp-evk.dtb
+dtb-$(CONFIG_SOC_LAN966) += \
+ lan966x-pcb8291.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-moxa-uc-8410a.dtb \
ls1021a-qds.dtb \
@@ -895,6 +903,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-regor-rdk.dtb \
am335x-sancloud-bbe.dtb \
am335x-sancloud-bbe-lite.dtb \
+ am335x-sancloud-bbe-extended-wifi.dtb \
am335x-shc.dtb \
am335x-sbc-t335.dtb \
am335x-sl50.dtb \
@@ -1162,6 +1171,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32mp157c-dhcom-picoitx.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
+ stm32mp157c-emsbc-argon.dtb \
stm32mp157c-ev1.dtb \
stm32mp157c-lxa-mc1.dtb \
stm32mp157c-odyssey.dtb
@@ -1229,6 +1239,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-bananapro.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
+ sun7i-a20-haoyu-marsboard.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-itead-ibox.dtb \
sun7i-a20-i12-tvbox.dtb \
@@ -1416,6 +1427,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-zybo.dtb \
zynq-zybo-z7.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
+ armada-370-c200-v2.dtb \
armada-370-db.dtb \
armada-370-dlink-dns327l.dtb \
armada-370-mirabox.dtb \
@@ -1493,6 +1505,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
dtb-$(CONFIG_ARCH_MSTARV7) += \
mstar-infinity-msc313-breadbee_crust.dtb \
+ mstar-infinity2m-ssd202d-100ask-dongshanpione.dtb \
+ mstar-infinity2m-ssd202d-miyoo-mini.dtb \
+ mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dtb \
mstar-infinity2m-ssd202d-ssd201htv2.dtb \
mstar-infinity2m-ssd202d-unitv2.dtb \
mstar-infinity3-msc313e-breadbee.dtb \
@@ -1506,6 +1521,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
+ aspeed-bmc-asrock-romed8hm3.dtb \
aspeed-bmc-bytedance-g220a.dtb \
aspeed-bmc-facebook-bletchley.dtb \
aspeed-bmc-facebook-cloudripper.dtb \
@@ -1543,6 +1559,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-opp-zaius.dtb \
aspeed-bmc-portwell-neptune.dtb \
aspeed-bmc-quanta-q71l.dtb \
+ aspeed-bmc-quanta-s6q.dtb \
aspeed-bmc-supermicro-x11spi.dtb \
aspeed-bmc-inventec-transformers.dtb \
aspeed-bmc-tyan-s7106.dtb \
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index b793beeab245..ce6cc2b96654 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -353,7 +353,7 @@
};
};
- mcp79400: mcp79400@6f {
+ mcp79400: rtc@6f {
compatible = "microchip,mcp7940x";
reg = <0x6f>;
};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
new file mode 100644
index 000000000000..246a1a9b3e44
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Sancloud Ltd
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "SanCloud BeagleBone Enhanced Extended WiFi";
+ compatible = "sancloud,am335x-boneenhanced",
+ "ti,am335x-bone-black",
+ "ti,am335x-bone",
+ "ti,am33xx";
+
+ wlan_en_reg: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us= <100000>;
+ };
+};
+
+&am33xx_pinmux {
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ /* gpmc_a9.gpio1_25: RADIO_EN */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_OUTPUT_PULLUP, MUX_MODE7)
+
+ /* gpmc_ad12.mmc2_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)
+
+ /* gpmc_ad13.mmc2_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)
+
+ /* gpmc_ad14.mmc2_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)
+
+ /* gpmc_ad15.mmc2_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)
+
+ /* gpmc_csn3.mmc2_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)
+
+ /* gpmc_clk.mmc2_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)
+ >;
+ };
+
+ bluetooth_pins: pinmux_bluetooth_pins {
+ pinctrl-single,pins = <
+ /* event_intr0.gpio0_19 */
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE7)
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ /* uart1_rxd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+
+ /* uart1_txd */
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+
+ /* uart1_ctsn */
+ AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+ /* uart1_rtsn */
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "okay";
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ ti,needs-special-hs-handling;
+ keep-power-in-suspend;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
+ dma-names = "tx", "rx";
+ clock-frequency = <50000000>;
+ max-frequency = <50000000>;
+};
+
+&uart1 {
+ status = "okay";
+
+ bluetooth {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins &bluetooth_pins>;
+ compatible = "qcom,qca6174-bt";
+ enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-c200-v2.dts b/arch/arm/boot/dts/armada-370-c200-v2.dts
new file mode 100644
index 000000000000..1a4a09bdde63
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-c200-v2.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Ctera C200-V2
+ *
+ * Copyright (C) 2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Ctera C200 V2";
+ compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>; /* 1024 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+ };
+
+ thermal-zones {
+ ethphy-thermal {
+ polling-delay = <20000>;
+ polling-delay-passive = <2000>;
+
+ thermal-sensors = <&ethphy0>;
+
+ trips {
+ ethphy_alert1: trip1 {
+ temperature = <65000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+
+ ethphy_crit: trip2 {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ beeper {
+ compatible = "pwm-beeper";
+ pinctrl-0 = <&pmx_beeper>;
+ pinctrl-names = "default";
+ pwms = <&gpio1 31 4000>;
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_poweroff>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+
+ power {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ };
+
+ usb1 {
+ label = "USB1 Button";
+ linux,code = <BTN_0>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2 {
+ label = "USB2 Button";
+ linux,code = <BTN_1>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+ pinctrl-names = "default";
+
+ led-0 {
+ function = LED_FUNCTION_USB;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_USB;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_USB;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_USB;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led-4 {
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-5 {
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+ };
+
+ led-6 {
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ };
+
+ led-7 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-8 {
+ function = LED_FUNCTION_DISK_ERR;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ };
+
+ led-9 {
+ function = LED_FUNCTION_DISK_ERR;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ };
+
+ led-10 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+ };
+
+ led-11 {
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ };
+
+ led-12 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&coherencyfab {
+ broken-idle;
+};
+
+&eth1 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-handle = <&ethphy0>;
+ phy-connection-type = "rgmii-id";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <100000>;
+ status = "okay";
+
+ hwmon@2a {
+ compatible = "nuvoton,nct7802";
+ reg = <0x2a>;
+ };
+
+ rtc@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+};
+
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+ reg = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0000000 0x200000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "certificate";
+ reg = <0x0200000 0x100000>;
+ read-only;
+ };
+
+ partition@300000 {
+ label = "preset_cfg";
+ reg = <0x0300000 0x100000>;
+ read-only;
+ };
+
+ partition@400000 {
+ label = "dev_params";
+ reg = <0x0400000 0x100000>;
+ read-only;
+ };
+ partition@500000 {
+ label = "active_bank";
+ reg = <0x0500000 0x0100000>;
+ };
+
+ partition@600000 {
+ label = "magic";
+ reg = <0x0600000 0x0100000>;
+ read-only;
+ };
+
+ partition@700000 {
+ label = "bank1";
+ reg = <0x0700000 0x2800000>;
+ };
+
+ partition@2f00000 {
+ label = "bank2";
+ reg = <0x2f00000 0x2800000>;
+ };
+
+ /* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+ partition@5a00000 {
+ label = "reserved";
+ reg = <0x5a00000 0x2000000>;
+ };
+
+ partition@7a00000 {
+ label = "rootfs";
+ reg = <0x7a00000 0x8600000>;
+ };
+ };
+ };
+};
+
+&pciec {
+ status = "okay";
+
+ pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */
+ pinctrl-0 = <&pmx_pcie>;
+ pinctrl-names = "default";
+ status = "okay";
+ reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ pmx_poweroff: pmx-poweroff {
+ marvell,pins = "mpp7";
+ marvell,function = "gpo";
+ };
+
+ pmx_power_cpu: pmx-power-cpu {
+ marvell,pins = "mpp4";
+ marvell,function = "vdd";
+ };
+
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
+ marvell,function = "gpio";
+ };
+
+ pmx_leds1: pmx-leds1 {
+ marvell,pins = "mpp47";
+ marvell,function = "gpo";
+ };
+
+ pmx_leds2: pmx-leds2 {
+ marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
+ "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
+ marvell,function = "gpio";
+ };
+
+ pmx_pcie: pmx-pcie {
+ marvell,pins = "mpp59";
+ marvell,function = "gpio";
+ };
+
+ pmx_beeper: pmx-beeper {
+ marvell,pins = "mpp63";
+ marvell,function = "gpio";
+ };
+};
+
+&pmsu {
+ pinctrl-0 = <&pmx_power_cpu>;
+ pinctrl-names = "default";
+};
+
+&rtc {
+ status = "disabled";
+};
+
+&sata {
+ nr-ports = <2>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdd0_temp: sata-port@0 {
+ reg = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ hdd1_temp: sata-port@1 {
+ reg = <1>;
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 5bd6a66d2c2b..f240018148f6 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -71,16 +71,19 @@
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
+ slot-power-limit-milliwatt = <10000>;
};
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
+ slot-power-limit-milliwatt = <10000>;
};
pcie@3,0 {
/* Port 2, Lane 0 */
status = "okay";
+ slot-power-limit-milliwatt = <10000>;
};
};
};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index f0022d10c715..83392b92dae2 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -69,16 +69,25 @@
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+ <0 0 0 2 &pcie1_intc 1>,
+ <0 0 0 3 &pcie1_intc 2>,
+ <0 0 0 4 &pcie1_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 8>;
status = "disabled";
+ pcie1_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
/* x1 port */
@@ -88,16 +97,25 @@
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+ <0 0 0 2 &pcie2_intc 1>,
+ <0 0 0 3 &pcie2_intc 2>,
+ <0 0 0 4 &pcie2_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
+ pcie2_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
/* x1 port */
@@ -107,16 +125,25 @@
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+ <0 0 0 2 &pcie3_intc 1>,
+ <0 0 0 3 &pcie3_intc 2>,
+ <0 0 0 4 &pcie3_intc 3>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 6>;
status = "disabled";
+ pcie3_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
/*
@@ -129,16 +156,25 @@
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+ <0 0 0 2 &pcie4_intc 1>,
+ <0 0 0 3 &pcie4_intc 2>,
+ <0 0 0 4 &pcie4_intc 3>;
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 7>;
status = "disabled";
+ pcie4_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 4c3c3f1a12ea..1b2e7ad37566 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -339,17 +339,8 @@
<&adc10mux 0>, <&adc10mux 1>,
<&adc11mux 0>, <&adc11mux 1>,
<&adc12mux 0>, <&adc12mux 1>,
- <&adc13mux 0>, <&adc13mux 1>;
- };
-
- iio-hwmon-adc14 {
- compatible = "iio-hwmon";
- io-channels = <&adc 14>;
- };
-
- iio-hwmon-battery {
- compatible = "iio-hwmon";
- io-channels = <&adc 15>;
+ <&adc13mux 0>, <&adc13mux 1>,
+ <&adc 14>, <&adc 15>;
};
};
@@ -362,6 +353,13 @@
/* spi-max-frequency = <50000000>; */
#include "openbmc-flash-layout-64.dtsi"
};
+
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+#include "openbmc-flash-layout-64-alt.dtsi"
+ };
};
&spi1 {
@@ -853,7 +851,7 @@
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
"S1_DDR_SAVE","","",
- /*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","",
+ /*G0-G7*/ "host0-ready","SHD_REQ_L","","S0_OVERTEMP_L","","",
"","",
/*H0-H7*/ "","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
/*I0-I7*/ "PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
@@ -869,7 +867,7 @@
/*Q0-Q7*/ "","","","","","UID_BUTTON","","",
/*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
"OCP_MAIN_PWREN","RESET_BUTTON","","",
- /*S0-S7*/ "","","","","RTC_BAT_SEN_EN","","","",
+ /*S0-S7*/ "","","","","rtc-battery-voltage-read-enable","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","","","","","","","",
@@ -884,7 +882,7 @@
/*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
"BMC_OCP_PG";
- i2c4_o_en {
+ i2c4-o-en-hog {
gpio-hog;
gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
new file mode 100644
index 000000000000..e71ccfd1df63
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+ model = "ASRock ROMED8HM3 BMC v1.00";
+ compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ system-fault {
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+ aspeed,lpc-io-reg = <0x2f8>;
+ aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ /* inlet temp sensor */
+ w83773g@4c {
+ compatible = "nuvoton,w83773g";
+ reg = <0x4c>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* IPB temp sensor */
+ w83773g@4c {
+ compatible = "nuvoton,w83773g";
+ reg = <0x4c>;
+ };
+
+ /* IPB PMIC */
+ lm25066@40 {
+ compatible = "lm25066";
+ reg = <0x40>;
+ };
+
+ /* 12VSB PMIC */
+ lm25066@41 {
+ compatible = "lm25066";
+ reg = <0x41>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* Baseboard FRU eeprom */
+ eeprom@50 {
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default
+ &pinctrl_pwm6_default>;
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
+ };
+
+ fan@6 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /* A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+ "", "", "", "",
+ /* B */ "DDR_MEM_TEMP", "", "", "", "", "", "", "",
+ /* C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
+ /* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+ "", "", "", "PSU_FAN_FAIL_N",
+ /* E */ "", "", "", "", "", "", "", "",
+ /* F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2",
+ "PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG",
+ /* G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+ "BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N",
+ /* H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N",
+ "FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+ /* I */ "", "", "", "", "", "", "", "",
+ /* J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N",
+ "", "", "", "",
+ /* K */ "", "", "", "", "", "", "", "",
+ /* L */ "", "", "", "", "", "", "", "",
+ /* M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN",
+ "MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN",
+ /* N */ "", "", "", "", "", "", "", "",
+ /* O */ "", "", "", "", "", "", "", "",
+ /* P */ "", "", "", "", "", "", "", "",
+ /* Q */ "", "", "", "",
+ "BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N",
+ "BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+ /* R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "",
+ /* S */ "", "", "", "", "", "", "", "",
+ /* T */ "", "", "", "", "", "", "", "",
+ /* U */ "", "", "", "", "", "", "", "",
+ /* V */ "", "", "", "", "", "", "", "",
+ /* W */ "", "", "", "", "", "", "", "",
+ /* X */ "", "", "", "", "", "", "", "",
+ /* Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "",
+ /* Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N",
+ "", "", "", "",
+ /* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "",
+ "", "", "", "",
+ /* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N",
+ "", "", "", "",
+ /* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
index f973ea883b97..eaf1bc261ee3 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
@@ -5,6 +5,8 @@
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Facebook Bletchley BMC";
@@ -31,7 +33,7 @@
<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
};
- spi_gpio: spi-gpio {
+ spi1_gpio: spi1-gpio {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
@@ -49,119 +51,165 @@
};
};
+ spi2_gpio: spi2-gpio {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <100000000>;
+ };
+ };
+
switchphy: ethernet-phy@0 {
// Fixed link
};
- leds {
+ front_gpio_leds {
compatible = "gpio-leds";
-
sys_log_id {
- retain-state-shutdown;
- default-state = "keep";
+ default-state = "off";
gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>;
};
+ };
+
+ fan_gpio_leds {
+ compatible = "gpio-leds";
fan0_blue {
retain-state-shutdown;
default-state = "on";
- gpios = <&fan_ioexp 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
};
fan1_blue {
retain-state-shutdown;
default-state = "on";
- gpios = <&fan_ioexp 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
};
fan2_blue {
retain-state-shutdown;
default-state = "on";
- gpios = <&fan_ioexp 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
};
fan3_blue {
retain-state-shutdown;
default-state = "on";
- gpios = <&fan_ioexp 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
};
fan0_amber {
retain-state-shutdown;
default-state = "off";
- gpios = <&fan_ioexp 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
};
fan1_amber {
retain-state-shutdown;
default-state = "off";
- gpios = <&fan_ioexp 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
};
fan2_amber {
retain-state-shutdown;
default-state = "off";
- gpios = <&fan_ioexp 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
};
fan3_amber {
retain-state-shutdown;
default-state = "off";
- gpios = <&fan_ioexp 15 GPIO_ACTIVE_HIGH>;
- };
- sled0_amber {
- retain-state-shutdown;
- default-state = "off";
- gpios = <&sled0_leds 0 GPIO_ACTIVE_LOW>;
- };
- sled0_blue {
- retain-state-shutdown;
- default-state = "off";
- gpios = <&sled0_leds 1 GPIO_ACTIVE_LOW>;
+ gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
};
+ };
+
+ sled1_gpio_leds {
+ compatible = "gpio-leds";
sled1_amber {
retain-state-shutdown;
- default-state = "off";
+ default-state = "keep";
gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
};
sled1_blue {
retain-state-shutdown;
- default-state = "off";
+ default-state = "keep";
gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
};
+ };
+
+ sled2_gpio_leds {
+ compatible = "gpio-leds";
sled2_amber {
retain-state-shutdown;
- default-state = "off";
+ default-state = "keep";
gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
};
sled2_blue {
retain-state-shutdown;
- default-state = "off";
+ default-state = "keep";
gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
};
+ };
+
+ sled3_gpio_leds {
+ compatible = "gpio-leds";
sled3_amber {
retain-state-shutdown;
- default-state = "off";
+ default-state = "keep";
gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
};
sled3_blue {
retain-state-shutdown;
- default-state = "off";
+ default-state = "keep";
gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
};
+ };
+
+ sled4_gpio_leds {
+ compatible = "gpio-leds";
sled4_amber {
retain-state-shutdown;
- default-state = "off";
+ default-state = "keep";
gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
};
sled4_blue {
retain-state-shutdown;
- default-state = "off";
+ default-state = "keep";
gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
};
+ };
+
+ sled5_gpio_leds {
+ compatible = "gpio-leds";
sled5_amber {
retain-state-shutdown;
- default-state = "off";
+ default-state = "keep";
gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
};
sled5_blue {
retain-state-shutdown;
- default-state = "off";
+ default-state = "keep";
gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
};
};
+
+ sled6_gpio_leds {
+ compatible = "gpio-leds";
+ sled6_amber {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
+ };
+ sled6_blue {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&mac2 {
@@ -177,10 +225,6 @@
};
};
-&rtc {
- status = "okay";
-};
-
&fmc {
status = "okay";
flash@0 {
@@ -190,24 +234,21 @@
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-128.dtsi"
};
-};
-
-&spi2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi2_default>;
-
- flash@0 {
+ flash@1 {
status = "okay";
m25p,fast-read;
- label = "pnor";
- spi-max-frequency = <100000000>;
+ label = "flash1";
+ spi-max-frequency = <50000000>;
};
};
&i2c0 {
status = "okay";
- /* TODO: Add ADC INA230 */
+ ina230@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
mp5023@40 {
compatible = "mps,mp5023";
@@ -219,7 +260,7 @@
reg = <0x4f>;
};
- sled0_ioexp: pca9539@76 {
+ sled1_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
@@ -227,14 +268,17 @@
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
+
gpio-line-names =
- "SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT",
- "SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT",
- "SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY",
- "SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0";
+ "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
+ "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
+ "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
+ "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
};
- sled0_leds: pca9552@67 {
+ sled1_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -243,13 +287,13 @@
#gpio-cells = <2>;
gpio-line-names =
- "led-sled0-amber","led-sled0-blue","SLED0_RST_IOEXP","",
+ "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
};
- sled0_fusb302: typec-portc@22 {
+ sled1_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
@@ -270,7 +314,11 @@
&i2c1 {
status = "okay";
- /* TODO: Add ADC INA230 */
+ ina230@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
mp5023@40 {
compatible = "mps,mp5023";
@@ -282,7 +330,7 @@
reg = <0x4f>;
};
- sled1_ioexp: pca9539@76 {
+ sled2_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
@@ -290,14 +338,17 @@
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
+
gpio-line-names =
- "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
- "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
- "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
- "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
+ "SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
+ "SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
+ "SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
+ "SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
};
- sled1_leds: pca9552@67 {
+ sled2_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -306,13 +357,13 @@
#gpio-cells = <2>;
gpio-line-names =
- "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","",
+ "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
};
- sled1_fusb302: typec-portc@22 {
+ sled2_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
@@ -331,13 +382,13 @@
};
};
-&i2c1 {
- status = "okay";
-};
-
&i2c2 {
status = "okay";
- /* TODO: Add ADC INA230 */
+ ina230@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
mp5023@40 {
compatible = "mps,mp5023";
@@ -349,7 +400,7 @@
reg = <0x4f>;
};
- sled2_ioexp: pca9539@76 {
+ sled3_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
@@ -357,14 +408,17 @@
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
+
gpio-line-names =
- "SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
- "SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
- "SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
- "SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
+ "SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
+ "SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
+ "SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
+ "SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
};
- sled2_leds: pca9552@67 {
+ sled3_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -373,13 +427,13 @@
#gpio-cells = <2>;
gpio-line-names =
- "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","",
+ "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
};
- sled2_fusb302: typec-portc@22 {
+ sled3_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
@@ -400,7 +454,11 @@
&i2c3 {
status = "okay";
- /* TODO: Add ADC INA230 */
+ ina230@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
mp5023@40 {
compatible = "mps,mp5023";
@@ -412,7 +470,7 @@
reg = <0x4f>;
};
- sled3_ioexp: pca9539@76 {
+ sled4_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
@@ -420,14 +478,17 @@
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
+
gpio-line-names =
- "SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
- "SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
- "SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
- "SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
+ "SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
+ "SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
+ "SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
+ "SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
};
- sled3_leds: pca9552@67 {
+ sled4_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -436,13 +497,13 @@
#gpio-cells = <2>;
gpio-line-names =
- "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","",
+ "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
};
- sled3_fusb302: typec-portc@22 {
+ sled4_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
@@ -463,7 +524,11 @@
&i2c4 {
status = "okay";
- /* TODO: Add ADC INA230 */
+ ina230@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
mp5023@40 {
compatible = "mps,mp5023";
@@ -475,7 +540,7 @@
reg = <0x4f>;
};
- sled4_ioexp: pca9539@76 {
+ sled5_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
@@ -483,14 +548,17 @@
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
+
gpio-line-names =
- "SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
- "SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
- "SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
- "SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
+ "SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
+ "SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
+ "SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
+ "SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
};
- sled4_leds: pca9552@67 {
+ sled5_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -499,13 +567,13 @@
#gpio-cells = <2>;
gpio-line-names =
- "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","",
+ "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
};
- sled4_fusb302: typec-portc@22 {
+ sled5_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
@@ -526,7 +594,11 @@
&i2c5 {
status = "okay";
- /* TODO: Add ADC INA230 */
+ ina230@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
mp5023@40 {
compatible = "mps,mp5023";
@@ -538,7 +610,7 @@
reg = <0x4f>;
};
- sled5_ioexp: pca9539@76 {
+ sled6_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
@@ -546,14 +618,17 @@
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+
gpio-line-names =
- "SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
- "SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
- "SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
- "SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
+ "SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
+ "SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
+ "SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
+ "SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
};
- sled5_leds: pca9552@67 {
+ sled6_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -562,13 +637,13 @@
#gpio-cells = <2>;
gpio-line-names =
- "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","",
+ "led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
};
- sled5_fusb302: typec-portc@22 {
+ sled6_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
@@ -596,6 +671,7 @@
};
rtc@51 {
+ /* in-chip rtc disabled, use external rtc (battery-backed) */
compatible = "nxp,pcf85263";
reg = <0x51>;
};
@@ -655,6 +731,7 @@
adm1278@11 {
compatible = "adi,adm1278";
reg = <0x11>;
+ shunt-resistor-micro-ohms = <300>;
};
tmp421@4c {
@@ -667,7 +744,7 @@
reg = <0x4d>;
};
- fan_ioexp: pca9552@67 {
+ fan_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -700,36 +777,38 @@
/*D0-D7*/ "","","","","","","","",
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","","","","","","",
- /*G0-G7*/ "","SWITCH_FRU_MUX","","","","","","",
+ /*G0-G7*/ "BSM_FRU_WP","SWITCH_FRU_MUX","","",
+ "PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
/*H0-H7*/ "presence-riser1","presence-riser2",
- "presence-sled0","presence-sled1",
- "presence-sled2","presence-sled3",
- "presence-sled4","presence-sled5",
+ "presence-sled1","presence-sled2",
+ "presence-sled3","presence-sled4",
+ "presence-sled5","presence-sled6",
/*I0-I7*/ "REV_ID0","","REV_ID1","REV_ID2",
- "","","","",
+ "","BSM_FLASH_WP_STATUS","BMC_TPM_PRES","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
- /*L0-L7*/ "","","","","","","","",
- /*M0-M7*/ "ALERT_SLED0","ALERT_SLED1",
- "ALERT_SLED2","ALERT_SLED3",
- "ALERT_SLED4","ALERT_SLED5",
+ /*L0-L7*/ "","","","","","BMC_RTC_INT","","",
+ /*M0-M7*/ "ALERT_SLED1","ALERT_SLED2",
+ "ALERT_SLED3","ALERT_SLED4",
+ "ALERT_SLED5","ALERT_SLED6",
"P12V_AUX_ALERT1","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","",
"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
- /*P0-P7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","BMC_HEARTBEAT",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","","BAT_DETECT",
"BMC_BT_WP0","BMC_BT_WP1","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
- /*V0-V7*/ "","RST_BMC_MVL","","",
+ /*V0-V7*/ "PWRGD_CNS_PSU","RST_BMC_MVL","","PSU_PRSNT",
"USB2_SEL0_A","USB2_SEL1_A",
"USB2_SEL0_B","USB2_SEL1_B",
/*W0-W7*/ "RST_FRONT_IOEXP","","","","","","","",
/*X0-X7*/ "","","","","","","","",
- /*Y0-Y7*/ "","","BSM_FLASH_LATCH","","","","","",
+ /*Y0-Y7*/ "BMC_SELF_HW_RST","BSM_PRSNT","BSM_FLASH_LATCH","",
+ "","","","",
/*Z0-Z7*/ "","","","","","","","";
};
@@ -754,3 +833,8 @@
&pinctrl_adc12_default &pinctrl_adc13_default
&pinctrl_adc14_default &pinctrl_adc15_default>;
};
+
+&mdio3 {
+ status = "okay";
+ /* TODO: Add Marvell 88X3310 */
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 22c06ff7a7ed..578f9e2fc7ed 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -171,9 +171,10 @@
/* 48MB region from the end of flash to start of vga memory */
ramoops@bc000000 {
compatible = "ramoops";
- reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+ reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
record-size = <0x8000>;
console-size = <0x8000>;
+ ftrace-size = <0x8000>;
pmsg-size = <0x8000>;
max-reason = <3>; /* KMSG_DUMP_EMERG */
};
@@ -269,9 +270,7 @@
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "","","","","","","","",
/*E0-E7*/ "","","","","","","","",
- /*F0-F7*/ "PIN_HOLE_RESET_IN_N","","",
- "PIN_HOLE_RESET_OUT_N","","",
- "factory-reset-toggle","",
+ /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
/*G0-G7*/ "","","","","","","","",
/*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
/*I0-I7*/ "","","","","","","bmc-secure-boot","",
@@ -2394,6 +2393,10 @@
status = "okay";
};
+&uhci {
+ status = "okay";
+};
+
&emmc_controller {
status = "okay";
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index c47974219832..528b49e2c0f8 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -102,9 +102,10 @@
ramoops@bc000000 {
compatible = "ramoops";
- reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+ reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
record-size = <0x8000>;
console-size = <0x8000>;
+ ftrace-size = <0x8000>;
pmsg-size = <0x8000>;
max-reason = <3>; /* KMSG_DUMP_EMERG */
};
@@ -239,6 +240,10 @@
status = "okay";
};
+&uhci {
+ status = "okay";
+};
+
&gpio0 {
gpio-line-names =
/*A0-A7*/ "","","","","","","","",
@@ -246,7 +251,7 @@
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "","","","","","","","",
/*E0-E7*/ "","","","","","","","",
- /*F0-F7*/ "","","","","","","factory-reset-toggle","",
+ /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
/*G0-G7*/ "","","","","","","","",
/*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
/*I0-I7*/ "","","","","","","bmc-secure-boot","",
@@ -2360,30 +2365,6 @@
use-ncsi;
};
-&fmc {
- status = "okay";
- flash@0 {
- status = "okay";
- m25p,fast-read;
- label = "bmc";
- spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
- };
-};
-
-&spi1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi1_default>;
-
- flash@0 {
- status = "okay";
- m25p,fast-read;
- label = "pnor";
- spi-max-frequency = <100000000>;
- };
-};
-
&wdt1 {
aspeed,reset-type = "none";
aspeed,external-signal;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index e39f310d55eb..72b7a6639ed9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -197,7 +197,6 @@
fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
- cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
cfam@0,0 {
reg = <0 0>;
@@ -877,3 +876,14 @@
status = "okay";
memory-region = <&vga_memory>;
};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
new file mode 100644
index 000000000000..69e1bd256271
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Quanta Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Quanta S6Q BMC";
+ compatible = "quanta,s6q-bmc", "aspeed,ast2600";
+
+ aliases {
+ // bus 0
+ i2c20 = &SMB_HOST_DB2000_3V3AUX_SCL;
+ i2c21 = &U12_PCA9546_CH1;
+ i2c22 = &SMB_HOST_DB800_B_SCL;
+ i2c23 = &SMB_HOST_DB800_C_SCL;
+
+ // bus 1
+ i2c24 = &SMB_M2_P0_1V8AUX_SCL;
+ i2c25 = &SMB_M2_P1_1V8AUX_SCL;
+ i2c26 = &SMB_CPU_PIROM_3V3AUX_SCL;
+ i2c27 = &SMB_TEMP_3V3AUX_SCL;
+ i2c28 = &SMB_IPMB_3V3AUX_SSDSB_SCL;
+ i2c29 = &SMB_IPMB_3V3AUX_SCL;
+ i2c31 = &SMB_FB_SCL;
+
+ // bus 1 - Fan board
+ i2c32 = &SMB_IOEXP_SCL;
+ i2c33 = &SMB_PROGRAM_SCL;
+ i2c34 = &SMB_FB_SCL_CH2;
+ i2c35 = &SMB_FAN_SENSE_SCL;
+
+ // bus 6
+ i2c36 = &U197_PCA9546_CH0;
+ i2c37 = &U197_PCA9546_CH1;
+ i2c38 = &U197_PCA9546_CH2;
+ i2c39 = &U197_PCA9546_CH3;
+
+ //bus 7
+ i2c40 = &SMB_OCP_SFF_3V3AUX_SCL; //OCP1
+ i2c41 = &SMB_OCP_LFF_3V3AUX_SCL; //OCP2
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200n8 earlycon";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+ <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ BMC_HEARTBEAT_N {
+ label="BMC_HEARTBEAT_N";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ BMC_LED_STATUS_AMBER_N {
+ label="BMC_LED_STATUS_AMBER_N";
+ gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ FM_ID_LED_N {
+ label="FM_ID_LED_N";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0 - A7*/ "", "", "", "", "", "", "", "",
+ /*B0 - B7*/ "", "", "", "", "", "", "", "",
+ /*C0 - C7*/ "", "", "", "", "", "", "", "",
+ /*D0 - D7*/ "", "", "", "", "", "", "", "",
+ /*E0 - E7*/ "", "", "", "", "", "", "", "",
+ /*F0 - F7*/ "PLTRST_N", "", "PWR_DEBUG_N", "", "", "", "", "",
+ /*G0 - G7*/ "", "", "", "", "", "", "", "",
+ /*H0 - H7*/ "", "", "", "", "", "", "", "",
+ /*I0 - I7*/ "", "", "", "", "", "", "", "",
+ /*J0 - J7*/ "", "", "", "", "", "", "", "",
+ /*K0 - K7*/ "", "", "", "", "", "", "", "",
+ /*L0 - L7*/ "", "", "", "", "PREQ_N", "TCK_MUX_SEL", "", "",
+ /*M0 - M7*/ "", "", "", "PWRGD_SYS_PWROK", "", "PRDY_N", "", "",
+ /*N0 - N7*/ "", "", "", "", "", "", "", "",
+ /*O0 - O7*/ "", "", "", "", "", "", "", "",
+ /*P0 - P7*/ "SYS_BMC_PWRBTN_R_N", "SYS_PWRBTN_N", "FM_MB_RST_BTN", "RST_BMC_RSTBTN_OUT_N", "", "", "", "",
+ /*Q0 - Q7*/ "", "", "", "", "", "", "", "",
+ /*R0 - R7*/ "", "", "", "", "", "", "", "",
+ /*S0 - S7*/ "", "", "", "FP_ID_BTN_SCM_N", "", "", "", "",
+ /*T0 - T7*/ "", "", "", "", "", "", "", "",
+ /*U0 - U7*/ "", "", "", "", "", "", "", "",
+ /*V0 - V7*/ "", "", "", "", "", "SMI", "", "",
+ /*W0 - W7*/ "", "", "", "", "", "", "", "",
+ /*X0 - X7*/ "", "", "", "", "", "", "", "",
+ /*Y0 - Y7*/ "", "", "", "", "", "", "", "",
+ /*Z0 - Z7*/ "FM_BMC_READY_N", "", "", "", "", "", "", "",
+ /*AA0 - AA7*/ "", "", "", "", "", "", "", "",
+ /*AB0 - AB7*/ "", "", "", "", "", "", "", "",
+ /*AC0 - AC7*/ "", "", "", "", "", "", "", "";
+};
+
+&sgpiom0 {
+ status = "okay";
+ ngpios = <128>;
+ bus-frequency = <48000>;
+ gpio-line-names =
+ /* SGPIO input lines */
+ /*IOA0-IOA7*/ "","", "SIO_POWER_GOOD","OA1", "XDP_PRST_N","", "","", "FM_SLPS3_PLD_N","", "FM_SLPS4_PLD_N","", "FM_BIOS_POST_CMPLT_BMC_N","", "FM_ADR_TRIGGER_N","OA7",
+ /*IOB0-IOB7*/ "FM_ADR_COMPLETE","", "FM_PMBUS_ALERT_B_EN","", "PSU0_PRESENT_N","", "PSU1_PRESENT_N","", "PSU0_VIN_BUF_GOOD","", "PSU01_VIN_BUF_GOOD","", "PWRGD_PS0_PWROK_R","", "PWRGD_PS1_PWROK_R","",
+ /*IOC0-IOC7*/ "PWRGD_PS_PWROK_PLD_R","", "CHASSIS_INTRUSION","", "BMC_MFG_MODE","", "FM_BMC_EN_DET_R","", "FM_ME_BT_DONE","", "CPU1_PRESENCE","", "CPU2_PRESENCE","", "IRQ_PSYS_CRIT_N","",
+ /*IOD0-IOD7*/ "","", "CPU1_THERMTRIP","", "CPU2_THERMTRIP","", "CPU1_MEM_THERM_EVENT","", "CPU2_MEM_THERM_EVENT","", "CPU1_VRHOT","", "CPU2_VRHOT","", "","",
+ /*IOE0-IOE7*/ "","", "CPU1_MEM_VRHOT","", "CPU2_MEM_VRHOT","", "","", "PCH_BMC_THERMTRIP","", "","", "","", "","",
+ /*IOF0-IOF7*/ "CPU_ERR0","", "CPU_ERR1","", "CPU_ERR2","", "","", "","", "CPU_CATERR","", "","", "","",
+ /*IOG0-IOG7*/ "","", "","", "","", "","", "","", "","", "","", "","",
+ /*IOH0-IOH7*/ "","", "FP_ID_BTN_R1_N","", "FP_RST_BTN_N","", "","", "","", "FP_PWR_BTN_PLD_N_R","", "","", "","",
+ /*IOI0-IOI7*/ "","", "","", "","", "","", "","", "","", "","", "","",
+ /*IOJ0-IOJ7*/ "","", "","", "","", "","", "","", "","", "","", "","",
+ /*IOK0-IOK7*/ "","", "","", "","", "","", "","", "","", "","", "","",
+ /*IOL0-IOL7*/ "","", "","", "","", "","", "","", "","", "","", "","",
+ /*IOM0-IOM7*/ "","", "","", "","", "","", "","", "","", "","", "","",
+ /*ION0-ION7*/ "","BMC_SW_HEARTBEAT_N_R", "","FP_LED_FAULT_N", "","FP_ID_LED_N", "","FM_BMC_RSTBTN_OUT_N", "","FM_THERMTRIP_DLY_LVC1_R_N", "","", "","RST_PCA9548_SENSOR_PLD_N", "","USB_OC1_REAR_N",
+ /*IOO0-IOO7*/ "","IRQ_TPM_SPI_N", "","", "","IRQ_PCH_SCI_WHEA_R_N", "","IRQ_BMC_PCH_NMI_R", "","H_CPU_NMI_LVC1_R_N", "","", "","", "","FM_JTAG_BMC_PLD_MUX_SEL",
+ /*IOP0-IOP7*/ "IP0","OP0", "","", "","", "","", "","", "","", "","", "IP7","OP7";
+};
+
+&adc0 {
+ vref = <2500>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ vref = <2500>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio2 {
+ status = "okay";
+
+ ethphy2: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mac2 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <&ethphy2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+ status = "okay";
+
+ phy-mode = "rmii";
+ use-ncsi;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
+ &pinctrl_spi2cs2_default>;
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "spi2:0";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&kcs1 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xCA0>;
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xCA8>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&emmc {
+ non-removable;
+ bus-width = <4>;
+ max-frequency = <100000000>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart_routing {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ U34_PWR_ADC@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+
+ U35_PWR_ADC@4b {
+ compatible = "ti,ads7830";
+ reg = <0x4b>;
+ };
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ SMB_HOST_DB2000_3V3AUX_SCL: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ U12_PCA9546_CH1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ SMB_HOST_DB800_B_SCL: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ SMB_HOST_DB800_C_SCL: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ i2c-switch@59 {
+ compatible = "nxp,pca9848";
+ reg = <0x59>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ SMB_M2_P0_1V8AUX_SCL: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ SMB_M2_P1_1V8AUX_SCL: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ SMB_CPU_PIROM_3V3AUX_SCL: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ SMB_TEMP_3V3AUX_SCL: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ U163_tmp75@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+ U114_tmp75@49 {
+ compatible = "ti,tmp75";
+ reg = <0x49>;
+ };
+ };
+
+ SMB_IPMB_3V3AUX_SSDSB_SCL: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ U4_tmp75@4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+ U73_tmp75@4d {
+ compatible = "ti,tmp75";
+ reg = <0x4d>;
+ };
+ };
+
+ SMB_IPMB_3V3AUX_SCL: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ U190_fru@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+ };
+
+ SMB_FB_SCL: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ i2c-switch@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ SMB_IOEXP_SCL: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ SMB_PROGRAM_SCL: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ SMB_FB_SCL_CH2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ SMB_FAN_SENSE_SCL: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ Current_Meter_U2@45 {
+ compatible = "ti,ina219";
+ reg = <0x45>;
+ shunt-resistor = <1000>; /* = 1 mOhm */
+ };
+
+ Current_Meter_U3@44 {
+ compatible = "ti,ina219";
+ reg = <0x44>;
+ shunt-resistor = <1000>; /* = 1 mOhm */
+ };
+
+ TEMP_sensor_U2@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ bus-frequency = <400000>;
+
+ ipmb@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* MB FRU (U173) @ 0xA2 */
+ mb_fru: mb_fru@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ /* FP_U1 Inlet */
+ FP_U1_tmp75@4a {
+ compatible = "ti,tmp75";
+ reg = <0x4a>;
+ };
+
+ FP_U4_fru@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ i2c-switch@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+
+ U197_PCA9546_CH0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ U197_PCA9546_CH1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ cpu0_pvccin@60 {
+ compatible = "isil,raa229004";
+ reg = <0x60>;
+ };
+
+ cpu0_pvccinfaon@61 {
+ compatible = "isil,isl69260";
+ reg = <0x61>;
+ };
+
+ cpu0_pvccd_hv@63 {
+ compatible = "isil,isl69260";
+ reg = <0x63>;
+ };
+ };
+
+ U197_PCA9546_CH2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ cpu1_pvccin@72 {
+ compatible = "isil,raa229004";
+ reg = <0x72>;
+ };
+
+ cpu1_pvccinfaon@74 {
+ compatible = "isil,isl69260";
+ reg = <0x74>;
+ };
+
+ cpu1_pvccd_hv@76 {
+ compatible = "isil,isl69260";
+ reg = <0x76>;
+ };
+ };
+
+ U197_PCA9546_CH3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ i2c-switch@75 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+
+ SMB_OCP_SFF_3V3AUX_SCL: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ SMB_OCP_LFF_3V3AUX_SCL: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c14 {
+ status = "okay";
+
+ /* SCM FRU (U19) @ 0xA2 */
+ scm_fru: scm_fru@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ scm_tmp75_u4@4a {
+ compatible = "ti,tmp75";
+ reg = <0x4a>;
+ };
+};
+
+&i2c15 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index b1068cca4228..7719ea3d4933 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -48,11 +48,11 @@
status = "okay";
};
- vdd_1v5: fixed-regulator-vdd_1v5@1 {
+ vdd_1v15: fixed-regulator-vdd_1v15@1 {
compatible = "regulator-fixed";
- regulator-name = "VDD_1V5";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
+ regulator-name = "VDD_1V15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
regulator-always-on;
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index ccf9e224da78..08685a10eda1 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -131,6 +131,18 @@
status = "okay";
};
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_default>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_default>;
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <&vddcpu>;
};
@@ -239,6 +251,7 @@
regulator-state-standby {
regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
regulator-mode = <4>;
};
@@ -279,6 +292,7 @@
regulator-state-standby {
regulator-on-in-suspend;
+ regulator-suspend-voltage = <1150000>;
regulator-mode = <4>;
};
@@ -290,7 +304,7 @@
vddcpu: VDD_OTHER {
regulator-name = "VDD_OTHER";
- regulator-min-microvolt = <1125000>;
+ regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1850000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
@@ -299,6 +313,7 @@
regulator-state-standby {
regulator-on-in-suspend;
+ regulator-suspend-voltage = <1050000>;
regulator-mode = <4>;
};
@@ -315,6 +330,7 @@
regulator-always-on;
regulator-state-standby {
+ regulator-suspend-voltage = <1800000>;
regulator-on-in-suspend;
};
@@ -329,6 +345,7 @@
regulator-max-microvolt = <3700000>;
regulator-state-standby {
+ regulator-suspend-voltage = <1800000>;
regulator-on-in-suspend;
};
@@ -454,6 +471,19 @@
};
&pioA {
+
+ pinctrl_can0_default: can0_default {
+ pinmux = <PIN_PD12__CANTX0>,
+ <PIN_PD13__CANRX0 >;
+ bias-disable;
+ };
+
+ pinctrl_can1_default: can1_default {
+ pinmux = <PIN_PD14__CANTX1>,
+ <PIN_PD15__CANRX1 >;
+ bias-disable;
+ };
+
pinctrl_flx0_default: flx0_default {
pinmux = <PIN_PE3__FLEXCOM0_IO0>,
<PIN_PE4__FLEXCOM0_IO1>,
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 21294f775a20..89af57482bc8 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -459,12 +459,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/100095/0003
+ * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+ * Source for d/i-cache-size
+ * https://www.raspberrypi.com/documentation/computers
+ * /processors.html#bcm2711
+ */
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000d8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
};
cpu1: cpu@1 {
@@ -473,6 +487,13 @@
reg = <1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
};
cpu2: cpu@2 {
@@ -481,6 +502,13 @@
reg = <2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
};
cpu3: cpu@3 {
@@ -489,6 +517,28 @@
reg = <3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000f0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
+ };
+
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/100095/0003
+ * /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+ * Source for d/i-cache-size
+ * https://www.raspberrypi.com/documentation/computers
+ * /processors.html#bcm2711
+ */
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x100000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+ cache-level = <2>;
};
};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 0549686134ea..1c90e5a44283 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -14,6 +14,23 @@
device_type = "cpu";
compatible = "arm,arm1176jzf-s";
reg = <0x0>;
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/ddi0301
+ * /h/level-one-memory-system/cache-organization?lang=en
+ *
+ * Source for d/i-cache-size
+ * https://forums.raspberrypi.com/viewtopic.php?t=98428
+ *
+ * NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU
+ * It can be shared with the CPU through fw settings,
+ * but this is not recommended.
+ */
+ d-cache-size = <0x4000>;
+ d-cache-line-size = <16>;
+ d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+ i-cache-size = <0x4000>;
+ i-cache-line-size = <16>;
+ i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
};
};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index b390006aef79..534dacfc4dd5 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -41,11 +41,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp";
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System
+ * /About-the-L1-memory-system?lang=en
+ *
+ * Source for d/i-cache-size
+ * https://forums.raspberrypi.com/viewtopic.php?t=98428
+ */
+
v7_cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf00>;
clock-frequency = <800000000>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <32>;
+ i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+ next-level-cache = <&l2>;
};
v7_cpu1: cpu@1 {
@@ -53,6 +68,13 @@
compatible = "arm,cortex-a7";
reg = <0xf01>;
clock-frequency = <800000000>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <32>;
+ i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+ next-level-cache = <&l2>;
};
v7_cpu2: cpu@2 {
@@ -60,6 +82,13 @@
compatible = "arm,cortex-a7";
reg = <0xf02>;
clock-frequency = <800000000>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <32>;
+ i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+ next-level-cache = <&l2>;
};
v7_cpu3: cpu@3 {
@@ -67,6 +96,27 @@
compatible = "arm,cortex-a7";
reg = <0xf03>;
clock-frequency = <800000000>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <32>;
+ i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+ next-level-cache = <&l2>;
+ };
+
+ /* Source for cache-line-size + cache-sets
+ * https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System
+ * /About-the-L2-Memory-system?lang=en
+ * Source for cache-size
+ * https://forums.raspberrypi.com/viewtopic.php?t=98428
+ */
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
+ cache-level = <2>;
};
};
};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 000000000000..4a768562985e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+ compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
+ model = "Raspberry Pi Zero 2 W";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0x20000000>;
+ };
+
+ chosen {
+ /* 8250 auxiliary UART instead of pl011 */
+ stdout-path = "serial1:115200n8";
+ };
+
+ leds {
+ led-act {
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&bt {
+ shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+ /*
+ * This is based on the official GPU firmware DT blob.
+ *
+ * Legend:
+ * "NC" = not connected (no rail from the SoC)
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "ID_SDA",
+ "ID_SCL",
+ "SDA1",
+ "SCL1",
+ "GPIO_GCLK",
+ "GPIO5",
+ "GPIO6",
+ "SPI_CE1_N",
+ "SPI_CE0_N",
+ "SPI_MISO",
+ "SPI_MOSI",
+ "SPI_SCLK",
+ "GPIO12",
+ "GPIO13",
+ /* Serial port */
+ "TXD0",
+ "RXD0",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "HDMI_HPD_N",
+ "STATUS_LED_N",
+ "NC", /* GPIO30 */
+ "NC", /* GPIO31 */
+ "NC", /* GPIO32 */
+ "NC", /* GPIO33 */
+ "NC", /* GPIO34 */
+ "NC", /* GPIO35 */
+ "NC", /* GPIO36 */
+ "NC", /* GPIO37 */
+ "NC", /* GPIO38 */
+ "NC", /* GPIO39 */
+ "CAM_GPIO0", /* GPIO40 */
+ "WL_ON", /* GPIO41 */
+ "BT_ON", /* GPIO42 */
+ "WIFI_CLK", /* GPIO43 */
+ "SDA0", /* GPIO44 */
+ "SCL0", /* GPIO45 */
+ "SMPS_SCL",
+ "SMPS_SDA",
+ /* Used by SD Card */
+ "SD_CLK_R",
+ "SD_CMD_R",
+ "SD_DATA0_R",
+ "SD_DATA1_R",
+ "SD_DATA2_R",
+ "SD_DATA3_R";
+
+ pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+ hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+ status = "okay";
+};
+
+&sdhci {
+ pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_gpio14>;
+ status = "okay";
+};
+
+&wifi_pwrseq {
+ reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 0199ec98cd61..5dbdebc46259 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -40,12 +40,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+ * /about-the-l1-memory-system?lang=en
+ *
+ * Source for d/i-cache-size
+ * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+ */
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000d8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
};
cpu1: cpu@1 {
@@ -54,6 +68,13 @@
reg = <1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
};
cpu2: cpu@2 {
@@ -62,6 +83,13 @@
reg = <2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
};
cpu3: cpu@3 {
@@ -70,6 +98,27 @@
reg = <3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000f0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
+ };
+
+ /* Source for cache-line-size + cache-sets
+ * https://developer.arm.com/documentation/ddi0500
+ * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+ * Source for cache-size
+ * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+ */
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+ cache-level = <2>;
};
};
};
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
index 249476fdad7a..82f9629f0abb 100644
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -93,6 +93,82 @@
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
};
};
+
+ switch {
+ compatible = "realtek,rtl8365mb";
+ /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+ mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ realtek,disable-leds;
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan5";
+ phy-handle = <&ethphy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan6";
+ phy-handle = <&ethphy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan7";
+ phy-handle = <&ethphy2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan8";
+ phy-handle = <&ethphy3>;
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&sw0_p5>;
+ phy-mode = "rgmii";
+ tx-internal-delay-ps = <2000>;
+ rx-internal-delay-ps = <2100>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+
+ mdio {
+ compatible = "realtek,smi-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
+ };
};
&srab {
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 24ae3c8a3e09..9efcb2424228 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -25,6 +25,9 @@
nvram@1eff0000 {
compatible = "brcm,nvram";
reg = <0x1eff0000 0x10000>;
+
+ et0macaddr: et0macaddr {
+ };
};
leds {
@@ -72,6 +75,11 @@
};
};
+&gmac0 {
+ nvmem-cells = <&et0macaddr>;
+ nvmem-cell-names = "mac-address";
+};
+
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
index ba01054a76cf..58b7d9fc7574 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -57,10 +57,9 @@
led-4 {
/* amber:power */
- function = LED_FUNCTION_POWER;
+ function = LED_FUNCTION_FAULT;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
- default-state = "on";
};
led-5 {
diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
index 7c487c74fd10..576cfc52567b 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
@@ -106,10 +106,9 @@
led-a {
/* amber:power */
- function = LED_FUNCTION_POWER;
+ function = LED_FUNCTION_FAULT;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
- default-state = "on";
};
led-b {
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
index 6519b7c61af1..b0854d881ac6 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -22,7 +22,7 @@
};
led-2 {
- function = LED_FUNCTION_INDICATOR;
+ function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
pwms = <&pwm 2 50000>;
max-brightness = <255>;
@@ -39,6 +39,8 @@
&amac2 {
status = "okay";
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
};
&ehci0 {
@@ -53,6 +55,12 @@
reg = <0x50>;
pagesize = <32>;
read-only;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mac_address: mac-address@66 {
+ reg = <0x66 0x6>;
+ };
};
};
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
new file mode 100644
index 000000000000..a8d8bb0419a0
--- /dev/null
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+ model = "Airoha EN7523 Evaluation Board";
+ compatible = "airoha,en7523-evb", "airoha,en7523";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ stdout-path = "serial0:115200n8";
+ linux,usable-memory-range = <0x80200000 0x1fe00000>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
new file mode 100644
index 000000000000..36597f587f46
--- /dev/null
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ npu_binary@84000000 {
+ no-map;
+ reg = <0x84000000 0xA00000>;
+ };
+
+ npu_flag@84B0000 {
+ no-map;
+ reg = <0x84B00000 0x100000>;
+ };
+
+ npu_pkt@85000000 {
+ no-map;
+ reg = <0x85000000 0x1A00000>;
+ };
+
+ npu_phyaddr@86B00000 {
+ no-map;
+ reg = <0x86B00000 0x100000>;
+ };
+
+ npu_rxdesc@86D00000 {
+ no-map;
+ reg = <0x86D00000 0x100000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ clock-frequency = <80000000>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ clock-frequency = <80000000>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ gic: interrupt-controller@9000000 {
+ compatible = "arm,gic-v3";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x09000000 0x20000>,
+ <0x09080000 0x80000>,
+ <0x09400000 0x2000>,
+ <0x09500000 0x2000>,
+ <0x09600000 0x20000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ uart1: serial@1fbf0000 {
+ compatible = "ns16550";
+ reg = <0x1fbf0000 0x30>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <1843200>;
+ status = "okay";
+ };
+
+ gpio0: gpio@1fbf0200 {
+ compatible = "airoha,en7523-gpio";
+ reg = <0x1fbf0204 0x4>,
+ <0x1fbf0200 0x4>,
+ <0x1fbf0220 0x4>,
+ <0x1fbf0214 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio1: gpio@1fbf0270 {
+ compatible = "airoha,en7523-gpio";
+ reg = <0x1fbf0270 0x4>,
+ <0x1fbf0260 0x4>,
+ <0x1fbf0264 0x4>,
+ <0x1fbf0278 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 829c05b2c405..7b429622a288 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -356,7 +356,7 @@
};
&pinctrl_1 {
- bten: bten {
+ bten: bten-pins {
samsung,pins ="gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -364,7 +364,7 @@
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
};
- wlanen: wlanen {
+ wlanen: wlanen-pins {
samsung,pins = "gpx2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -372,12 +372,12 @@
samsung,pin-val = <1>;
};
- s2mps14_irq: s2mps14-irq {
+ s2mps14_irq: s2mps14-irq-pins {
samsung,pins = "gpx3-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bthostwake: bthostwake {
+ bthostwake: bthostwake-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -385,7 +385,7 @@
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
- btwake: btwake {
+ btwake: btwake-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 8b41a9d5e2db..02a9dc479d34 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -69,7 +69,7 @@
reg = <0x25>;
wakeup-source;
- muic: max77836-muic {
+ extcon {
compatible = "maxim,max77836-muic";
};
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index dff3c6e3aa1f..cc30d154ec94 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -12,47 +12,22 @@
#include <dt-bindings/pinctrl/samsung.h>
#define PIN_IN(_pin, _pull, _drv) \
- _pin { \
+ pin- ## _pin { \
samsung,pins = #_pin; \
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; \
samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \
samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
}
-#define PIN_OUT(_pin, _drv) \
- _pin { \
- samsung,pins = #_pin; \
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; \
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; \
- samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
- }
-
-#define PIN_OUT_SET(_pin, _val, _drv) \
- _pin { \
- samsung,pins = #_pin; \
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; \
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; \
- samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
- samsung,pin-val = <_val>; \
- }
-
-#define PIN_CFG(_pin, _sel, _pull, _drv) \
- _pin { \
- samsung,pins = #_pin; \
- samsung,pin-function = <_sel>; \
- samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \
- samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
- }
-
#define PIN_SLP(_pin, _mode, _pull) \
- _pin { \
+ pin- ## _pin { \
samsung,pins = #_pin; \
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>; \
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>; \
}
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -60,7 +35,7 @@
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -68,7 +43,7 @@
#interrupt-cells = <2>;
};
- gpb: gpb {
+ gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -76,7 +51,7 @@
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -84,7 +59,7 @@
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -92,7 +67,7 @@
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -100,7 +75,7 @@
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -108,84 +83,84 @@
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c3_bus: i2c3-bus {
+ i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c4_bus: i2c4-bus {
+ i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c5_bus: i2c5-bus {
+ i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -193,7 +168,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm2_bus: pcm2-bus {
+ pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -201,63 +176,63 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c6_bus: i2c6-bus {
+ i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpd0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c7_bus: i2c7-bus {
+ i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- mipi0_clk: mipi0-clk {
+ mipi0_clk: mipi0-clk-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -266,22 +241,22 @@
};
&pinctrl_1 {
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpe2: gpe2 {
+ gpe2: gpe2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpk0: gpk0 {
+ gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -289,7 +264,7 @@
#interrupt-cells = <2>;
};
- gpk1: gpk1 {
+ gpk1: gpk1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -297,7 +272,7 @@
#interrupt-cells = <2>;
};
- gpk2: gpk2 {
+ gpk2: gpk2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -305,7 +280,7 @@
#interrupt-cells = <2>;
};
- gpl0: gpl0 {
+ gpl0: gpl0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -313,7 +288,7 @@
#interrupt-cells = <2>;
};
- gpm0: gpm0 {
+ gpm0: gpm0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -321,7 +296,7 @@
#interrupt-cells = <2>;
};
- gpm1: gpm1 {
+ gpm1: gpm1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -329,7 +304,7 @@
#interrupt-cells = <2>;
};
- gpm2: gpm2 {
+ gpm2: gpm2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -337,7 +312,7 @@
#interrupt-cells = <2>;
};
- gpm3: gpm3 {
+ gpm3: gpm3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -345,7 +320,7 @@
#interrupt-cells = <2>;
};
- gpm4: gpm4 {
+ gpm4: gpm4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -353,7 +328,7 @@
#interrupt-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -370,7 +345,7 @@
#interrupt-cells = <2>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -387,7 +362,7 @@
#interrupt-cells = <2>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -395,7 +370,7 @@
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -403,126 +378,126 @@
#interrupt-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_rdqs: sd0-rdqs {
+ sd0_rdqs: sd0-rdqs-pins {
samsung,pins = "gpk0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpk1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpk1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpk1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpk1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpk2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpk2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpk2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpk2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_b_io: cam-port-b-io {
+ cam_port_b_io: cam-port-b-io-pins {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
@@ -531,35 +506,35 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_b_clk_active: cam-port-b-clk-active {
+ cam_port_b_clk_active: cam-port-b-clk-active-pins {
samsung,pins = "gpm2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_b_clk_idle: cam-port-b-clk-idle {
+ cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
samsung,pins = "gpm2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fimc_is_i2c0: fimc-is-i2c0 {
+ fimc_is_i2c0: fimc-is-i2c0-pins {
samsung,pins = "gpm4-0", "gpm4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fimc_is_i2c1: fimc-is-i2c1 {
+ fimc_is_i2c1: fimc-is-i2c1-pins {
samsung,pins = "gpm4-2", "gpm4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fimc_is_uart: fimc-is-uart {
+ fimc_is_uart: fimc-is-uart-pins {
samsung,pins = "gpm3-5", "gpm3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 5f7f8fedfb92..6d2c7bb19184 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -70,7 +70,7 @@
reg = <0x25>;
wakeup-source;
- muic: max77836-muic {
+ extcon {
compatible = "maxim,max77836-muic";
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index a10b789d8acf..ae644315855d 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -421,7 +421,7 @@
status = "disabled";
};
- pdma0: pdma@12680000 {
+ pdma0: dma-controller@12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -432,7 +432,7 @@
#dma-requests = <32>;
};
- pdma1: pdma@12690000 {
+ pdma1: dma-controller@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index eab77a66ae8f..e81b3ee4e0f7 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -669,7 +669,7 @@
status = "disabled";
};
- pdma0: pdma@12680000 {
+ pdma0: dma-controller@12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
@@ -680,7 +680,7 @@
#dma-requests = <32>;
};
- pdma1: pdma@12690000 {
+ pdma1: dma-controller@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
@@ -691,7 +691,7 @@
#dma-requests = <32>;
};
- mdma1: mdma@12850000 {
+ mdma1: dma-controller@12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 33894054b8b0..3c0a18b30837 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -672,26 +672,26 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
- sleep0: sleep-states {
- gpa0-0 {
+ sleep0: sleep-state {
+ gpa0-0-pin {
samsung,pins = "gpa0-0";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
- gpa0-1 {
+ gpa0-1-pin {
samsung,pins = "gpa0-1";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
- gpa0-2 {
+ gpa0-2-pin {
samsung,pins = "gpa0-2";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
- gpa0-3 {
+ gpa0-3-pin {
samsung,pins = "gpa0-3";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
@@ -700,19 +700,19 @@
};
&pinctrl_1 {
- mhl_int: mhl-int {
+ mhl_int: mhl-int-pins {
samsung,pins = "gpf3-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- i2c_mhl_bus: i2c-mhl-bus {
+ i2c_mhl_bus: i2c-mhl-bus-pins {
samsung,pins = "gpf0-4", "gpf0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- usb_sel: usb-sel {
+ usb_sel: usb-sel-pins {
samsung,pins = "gpl0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -720,7 +720,7 @@
samsung,pin-val = <0>;
};
- bt_en: bt-en {
+ bt_en: bt-en-pins {
samsung,pins = "gpl0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -728,7 +728,7 @@
samsung,pin-val = <0>;
};
- bt_res: bt-res {
+ bt_res: bt-res-pins {
samsung,pins = "gpl1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -736,7 +736,7 @@
samsung,pin-val = <0>;
};
- otg_gp: otg-gp {
+ otg_gp: otg-gp-pins {
samsung,pins = "gpx3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -744,23 +744,23 @@
samsung,pin-val = <0>;
};
- mag_mhl_gpio: mag-mhl {
+ mag_mhl_gpio: mag-mhl-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max8997_irq: max8997-irq {
+ max8997_irq: max8997-irq-pins {
samsung,pins = "gpx0-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max17042_fuel_irq: max17042-fuel-irq {
+ max17042_fuel_irq: max17042-fuel-irq-pins {
samsung,pins = "gpx2-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- tsp224_irq: tsp224-irq {
+ tsp224_irq: tsp224-irq-pins {
samsung,pins = "gpx0-4";
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 435fda60e86d..a08ce2f37ea2 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -316,7 +316,7 @@
};
&pinctrl_1 {
- max8997_irq: max8997-irq {
+ max8997_irq: max8997-irq-pins {
samsung,pins = "gpx0-3", "gpx0-4";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 520c5934a8d4..6373009bb727 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -14,7 +14,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -22,7 +22,7 @@
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -30,7 +30,7 @@
#interrupt-cells = <2>;
};
- gpb: gpb {
+ gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -38,7 +38,7 @@
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -46,7 +46,7 @@
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -54,7 +54,7 @@
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -62,7 +62,7 @@
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -70,7 +70,7 @@
#interrupt-cells = <2>;
};
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -78,7 +78,7 @@
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -86,7 +86,7 @@
#interrupt-cells = <2>;
};
- gpe2: gpe2 {
+ gpe2: gpe2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -94,7 +94,7 @@
#interrupt-cells = <2>;
};
- gpe3: gpe3 {
+ gpe3: gpe3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -102,7 +102,7 @@
#interrupt-cells = <2>;
};
- gpe4: gpe4 {
+ gpe4: gpe4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -110,7 +110,7 @@
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -118,7 +118,7 @@
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -126,7 +126,7 @@
#interrupt-cells = <2>;
};
- gpf2: gpf2 {
+ gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -134,7 +134,7 @@
#interrupt-cells = <2>;
};
- gpf3: gpf3 {
+ gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -142,112 +142,112 @@
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart_audio_a: uart-audio-a {
+ uart_audio_a: uart-audio-a-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c3_bus: i2c3-bus {
+ i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart_audio_b: uart-audio-b {
+ uart_audio_b: uart-audio-b-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c4_bus: i2c4-bus {
+ i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c5_bus: i2c5-bus {
+ i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -255,7 +255,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -263,7 +263,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ac97_bus: ac97-bus {
+ ac97_bus: ac97-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -271,7 +271,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -279,7 +279,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm2_bus: pcm2-bus {
+ pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -287,105 +287,105 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spdif_bus: spdif-bus {
+ spdif_bus: spdif-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c6_bus: i2c6-bus {
+ i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c7_bus: i2c7-bus {
+ i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpd0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_ctrl: lcd-ctrl {
+ lcd_ctrl: lcd-ctrl-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_sync: lcd-sync {
+ lcd_sync: lcd-sync-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_en: lcd-en {
+ lcd_en: lcd-en-pins {
samsung,pins = "gpe3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_clk: lcd-clk {
+ lcd_clk: lcd-clk-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data16: lcd-data-width16 {
+ lcd_data16: lcd-data-width16-pins {
samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
@@ -395,7 +395,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data18: lcd-data-width18 {
+ lcd_data18: lcd-data-width18-pins {
samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
@@ -406,7 +406,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data24: lcd-data-width24 {
+ lcd_data24: lcd-data-width24-pins {
samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
@@ -420,7 +420,7 @@
};
&pinctrl_1 {
- gpj0: gpj0 {
+ gpj0: gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -428,7 +428,7 @@
#interrupt-cells = <2>;
};
- gpj1: gpj1 {
+ gpj1: gpj1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -436,7 +436,7 @@
#interrupt-cells = <2>;
};
- gpk0: gpk0 {
+ gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -444,7 +444,7 @@
#interrupt-cells = <2>;
};
- gpk1: gpk1 {
+ gpk1: gpk1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -452,7 +452,7 @@
#interrupt-cells = <2>;
};
- gpk2: gpk2 {
+ gpk2: gpk2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -460,7 +460,7 @@
#interrupt-cells = <2>;
};
- gpk3: gpk3 {
+ gpk3: gpk3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -468,7 +468,7 @@
#interrupt-cells = <2>;
};
- gpl0: gpl0 {
+ gpl0: gpl0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -476,7 +476,7 @@
#interrupt-cells = <2>;
};
- gpl1: gpl1 {
+ gpl1: gpl1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -484,7 +484,7 @@
#interrupt-cells = <2>;
};
- gpl2: gpl2 {
+ gpl2: gpl2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -492,42 +492,42 @@
#interrupt-cells = <2>;
};
- gpy0: gpy0 {
+ gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy1: gpy1 {
+ gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy2: gpy2 {
+ gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy3: gpy3 {
+ gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy4: gpy4 {
+ gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy5: gpy5 {
+ gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy6: gpy6 {
+ gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -544,7 +544,7 @@
#interrupt-cells = <2>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -561,7 +561,7 @@
#interrupt-cells = <2>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -569,7 +569,7 @@
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -577,238 +577,238 @@
#interrupt-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_clk: sd4-clk {
+ sd4_clk: sd4-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_cmd: sd4-cmd {
+ sd4_cmd: sd4-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_cd: sd4-cd {
+ sd4_cd: sd4-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_bus1: sd4-bus-width1 {
+ sd4_bus1: sd4-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_bus4: sd4-bus-width4 {
+ sd4_bus4: sd4-bus-width4-pins {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_bus8: sd4-bus-width8 {
+ sd4_bus8: sd4-bus-width8-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpk1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpk1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpk1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpk1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpk2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpk2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpk2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpk2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus8: sd2-bus-width8 {
+ sd2_bus8: sd2-bus-width8-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_clk: sd3-clk {
+ sd3_clk: sd3-clk-pins {
samsung,pins = "gpk3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cmd: sd3-cmd {
+ sd3_cmd: sd3-cmd-pins {
samsung,pins = "gpk3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cd: sd3-cd {
+ sd3_cd: sd3-cd-pins {
samsung,pins = "gpk3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus1: sd3-bus-width1 {
+ sd3_bus1: sd3-bus-width1-pins {
samsung,pins = "gpk3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus4: sd3-bus-width4 {
+ sd3_bus4: sd3-bus-width4-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- eint0: ext-int0 {
+ eint0: ext-int0-pins {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint8: ext-int8 {
+ eint8: ext-int8-pins {
samsung,pins = "gpx1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint15: ext-int15 {
+ eint15: ext-int15-pins {
samsung,pins = "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint16: ext-int16 {
+ eint16: ext-int16-pins {
samsung,pins = "gpx2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint31: ext-int31 {
+ eint31: ext-int31-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a_io: cam-port-a-io {
+ cam_port_a_io: cam-port-a-io-pins {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -817,21 +817,21 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a_clk_active: cam-port-a-clk-active {
+ cam_port_a_clk_active: cam-port-a-clk-active-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_a_clk_idle: cam-port-a-clk-idle {
+ cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_cec: hdmi-cec {
+ hdmi_cec: hdmi-cec-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -840,12 +840,12 @@
};
&pinctrl_2 {
- gpz: gpz {
+ gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -853,7 +853,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm0_bus: pcm0-bus {
+ pcm0_bus: pcm0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index d5797a67bf48..a5dfd7fd49b3 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -152,14 +152,14 @@
};
&pinctrl_1 {
- keypad_rows: keypad-rows {
+ keypad_rows: keypad-rows-pins {
samsung,pins = "gpx2-0", "gpx2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_cols: keypad-cols {
+ keypad_cols: keypad-cols-pins {
samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
"gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 9c4ff7521348..01f44d95f671 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -464,19 +464,19 @@
};
&pinctrl_1 {
- bt_shutdown: bt-shutdown {
+ bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpl1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_host_wakeup: bt-host-wakeup {
+ bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_device_wakeup: bt-device-wakeup {
+ bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 9f93e7464aed..138d606d58a5 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -533,37 +533,37 @@
};
&pinctrl_1 {
- bt_shutdown: bt-shutdown {
+ bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpe1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_host_wakeup: bt-host-wakeup {
+ bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_device_wakeup: bt-device-wakeup {
+ bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- lp3974_irq: lp3974-irq {
+ lp3974_irq: lp3974-irq-pins {
samsung,pins = "gpx0-7", "gpx2-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- hdmi_hpd: hdmi-hpd {
+ hdmi_hpd: hdmi-hpd-pins {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
};
&pinctrl_0 {
- i2c_ddc_bus: i2c-ddc-bus {
+ i2c_ddc_bus: i2c-ddc-bus-pins {
samsung,pins = "gpe4-2", "gpe4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -659,7 +659,7 @@
};
&soc {
- mdma0: mdma@12840000 {
+ mdma0: dma-controller@12840000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12840000 0x1000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 7e7d65ce6585..2c25cc37934e 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -527,8 +527,6 @@
compatible = "samsung,exynos4210-tmu";
clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
- samsung,tmu_gain = <15>;
- samsung,tmu_reference_voltage = <7>;
};
#include "exynos4210-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index c14e37dc3a9b..03dffc690b79 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -151,13 +151,13 @@
};
&pinctrl_0 {
- camera_flash_host: camera-flash-host {
+ camera_flash_host: camera-flash-host-pins {
samsung,pins = "gpj1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-val = <0>;
};
- camera_flash_isp: camera-flash-isp {
+ camera_flash_isp: camera-flash-isp-pins {
samsung,pins = "gpj1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-val = <1>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index 47431307cb3c..a9406280b979 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -192,7 +192,7 @@
};
&pinctrl_1 {
- ether-reset {
+ ether-reset-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index b3726d4d7d93..a67cb61e3cbb 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -484,7 +484,7 @@
};
&pinctrl_1 {
- hsic_reset: hsic-reset {
+ hsic_reset: hsic-reset-pins {
samsung,pins = "gpm2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 968c7943653e..23f50c9be527 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -987,19 +987,19 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
- mhl_int: mhl-int {
+ mhl_int: mhl-int-pins {
samsung,pins = "gpf3-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- i2c_mhl_bus: i2c-mhl-bus {
+ i2c_mhl_bus: i2c-mhl-bus-pins {
samsung,pins = "gpf0-4", "gpf0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- sleep0: sleep-states {
+ sleep0: sleep-state {
PIN_SLP(gpa0-0, INPUT, NONE);
PIN_SLP(gpa0-1, OUT0, NONE);
PIN_SLP(gpa0-2, INPUT, NONE);
@@ -1102,52 +1102,52 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
- gpio_keys: gpio-keys {
+ gpio_keys: gpio-keys-pins {
samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_shutdown: bt-shutdown {
+ bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpl0-6";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_host_wakeup: bt-host-wakeup {
+ bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_device_wakeup: bt-device-wakeup {
+ bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max77686_irq: max77686-irq {
+ max77686_irq: max77686-irq-pins {
samsung,pins = "gpx0-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max77693_irq: max77693-irq {
+ max77693_irq: max77693-irq-pins {
samsung,pins = "gpx1-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max77693_fuel_irq: max77693-fuel-irq {
+ max77693_fuel_irq: max77693-fuel-irq-pins {
samsung,pins = "gpx2-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- sdhci2_cd: sdhci2-cd-irq {
+ sdhci2_cd: sdhci2-cd-irq-pins {
samsung,pins = "gpx3-4";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- hdmi_hpd: hdmi-hpd {
+ hdmi_hpd: hdmi-hpd-pins {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
- sleep1: sleep-states {
+ sleep1: sleep-state {
PIN_SLP(gpk0-0, PREV, NONE);
PIN_SLP(gpk0-1, PREV, NONE);
PIN_SLP(gpk0-2, OUT0, NONE);
@@ -1300,7 +1300,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep2>;
- sleep2: sleep-states {
+ sleep2: sleep-state {
PIN_SLP(gpz-0, INPUT, DOWN);
PIN_SLP(gpz-1, INPUT, DOWN);
PIN_SLP(gpz-2, INPUT, DOWN);
@@ -1315,7 +1315,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep3>;
- sleep3: sleep-states {
+ sleep3: sleep-state {
PIN_SLP(gpv0-0, INPUT, DOWN);
PIN_SLP(gpv0-1, INPUT, DOWN);
PIN_SLP(gpv0-2, INPUT, DOWN);
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 5b1d4591b35c..e7669b9e9edb 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -172,24 +172,24 @@
};
&pinctrl_1 {
- gpio_power_key: power-key {
+ gpio_power_key: power-key-pins {
samsung,pins = "gpx1-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max77686_irq: max77686-irq {
+ max77686_irq: max77686-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_hpd: hdmi-hpd {
+ hdmi_hpd: hdmi-hpd-pins {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
- emmc_rstn: emmc-rstn {
+ emmc_rstn: emmc-rstn-pins {
samsung,pins = "gpk1-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 440135d0ff2a..a9fada51eb50 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -112,7 +112,7 @@
};
&pinctrl_1 {
- gpio_home_key: home-key {
+ gpio_home_key: home-key-pins {
samsung,pins = "gpx2-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index e6aec5facabf..6db09dba07ff 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -506,14 +506,14 @@
};
&pinctrl_1 {
- keypad_rows: keypad-rows {
+ keypad_rows: keypad-rows-pins {
samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_cols: keypad-cols {
+ keypad_cols: keypad-cols-pins {
samsung,pins = "gpx1-0", "gpx1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index 22c3086e0076..97f131b1014b 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -16,6 +16,7 @@
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/samsung.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
/ {
compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
@@ -114,6 +115,17 @@
clock-names = "ext_clock";
};
+ battery_cell: battery-cell {
+ compatible = "simple-battery";
+ device-chemistry = "lithium-ion";
+ constant-charge-current-max-microamp = <2200000>;
+ precharge-current-microamp = <250000>;
+ charge-term-current-microamp = <250000>;
+ constant-charge-voltage-max-microvolt = <4200000>;
+
+ power-supplies = <&power_supply>;
+ };
+
i2c-gpio-1 {
compatible = "i2c-gpio";
sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -182,6 +194,28 @@
};
};
};
+
+ i2c-gpio-4 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power_supply: charger@6 {
+ compatible = "summit,smb347";
+ reg = <0x6>;
+ summit,enable-usb-charging;
+ summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+ summit,fast-voltage-threshold-microvolt = <2600000>;
+ summit,chip-temperature-threshold-celsius = <130>;
+ summit,usb-current-limit-microamp = <1800000>;
+
+ monitored-battery = <&battery_cell>;
+ };
+ };
};
&adc {
@@ -641,19 +675,19 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
- tsp_reg_gpio_2: tsp-reg-gpio-2 {
+ tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
samsung,pins = "gpb-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- tsp_reg_gpio_3: tsp-reg-gpio-3 {
+ tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
samsung,pins = "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- sleep0: sleep-states {
+ sleep0: sleep-state {
PIN_SLP(gpa0-0, INPUT, NONE);
PIN_SLP(gpa0-1, OUT0, NONE);
PIN_SLP(gpa0-2, INPUT, NONE);
@@ -755,19 +789,19 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
- sd3_wifi: sd3-wifi {
+ sd3_wifi: sd3-wifi-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_shutdown: bt-shutdown {
+ bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpl0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- uart_sel: uart-sel {
+ uart_sel: uart-sel-pins {
samsung,pins = "gpl2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -775,82 +809,82 @@
/* 0 = CP, 1 = AP (serial output) */
};
- tsp_rst: tsp-rst {
+ tsp_rst: tsp-rst-pins {
samsung,pins = "gpm0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- tsp_irq: tsp-irq {
+ tsp_irq: tsp-irq-pins {
samsung,pins = "gpm2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- wifi_reset: wifi-reset {
+ wifi_reset: wifi-reset-pins {
samsung,pins = "gpm3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- tsp_reg_gpio_1: tsp-reg-gpio-1 {
+ tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
samsung,pins = "gpm4-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- ak8975_irq: ak8975-irq {
+ ak8975_irq: ak8975-irq-pins {
samsung,pins = "gpm4-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
- stmpe_adc_irq: stmpe-adc-irq {
+ stmpe_adc_irq: stmpe-adc-irq-pins {
samsung,pins = "gpx0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max77686_irq: max77686-irq {
+ max77686_irq: max77686-irq-pins {
samsung,pins = "gpx0-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- gpio_keys: gpio-keys {
+ gpio_keys: gpio-keys-pins {
samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- fuel_alert_irq: fuel-alert-irq {
+ fuel_alert_irq: fuel-alert-irq-pins {
samsung,pins = "gpx2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- wifi_host_wake: wifi-host-wake {
+ wifi_host_wake: wifi-host-wake-pins {
samsung,pins = "gpx2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
- bt_host_wakeup: bt-host-wakeup {
+ bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_device_wakeup: bt-device-wakeup {
+ bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- sdhci2_cd: sdhci2-cd {
+ sdhci2_cd: sdhci2-cd-pins {
samsung,pins = "gpx3-4";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- sleep1: sleep-states {
+ sleep1: sleep-state {
PIN_SLP(gpk0-0, PREV, NONE);
PIN_SLP(gpk0-1, PREV, NONE);
PIN_SLP(gpk0-2, PREV, NONE);
@@ -1004,7 +1038,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep2>;
- sleep2: sleep-states {
+ sleep2: sleep-state {
PIN_SLP(gpz-0, INPUT, DOWN);
PIN_SLP(gpz-1, INPUT, DOWN);
PIN_SLP(gpz-2, INPUT, DOWN);
@@ -1019,7 +1053,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep3>;
- sleep3: sleep-states {
+ sleep3: sleep-state {
PIN_SLP(gpv0-0, INPUT, DOWN);
PIN_SLP(gpv0-1, INPUT, DOWN);
PIN_SLP(gpv0-2, INPUT, DOWN);
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
index d7d5fdc230d8..88b8afd55664 100644
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
@@ -19,7 +19,7 @@
}
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -27,7 +27,7 @@
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -35,7 +35,7 @@
#interrupt-cells = <2>;
};
- gpb: gpb {
+ gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -43,7 +43,7 @@
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -51,7 +51,7 @@
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -59,7 +59,7 @@
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -67,7 +67,7 @@
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -75,7 +75,7 @@
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -83,7 +83,7 @@
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -91,7 +91,7 @@
#interrupt-cells = <2>;
};
- gpf2: gpf2 {
+ gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -99,7 +99,7 @@
#interrupt-cells = <2>;
};
- gpf3: gpf3 {
+ gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -107,7 +107,7 @@
#interrupt-cells = <2>;
};
- gpj0: gpj0 {
+ gpj0: gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -115,7 +115,7 @@
#interrupt-cells = <2>;
};
- gpj1: gpj1 {
+ gpj1: gpj1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -123,112 +123,112 @@
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart_audio_a: uart-audio-a {
+ uart_audio_a: uart-audio-a-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c3_bus: i2c3-bus {
+ i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart_audio_b: uart-audio-b {
+ uart_audio_b: uart-audio-b-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c4_bus: i2c4-bus {
+ i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c5_bus: i2c5-bus {
+ i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -236,7 +236,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -244,7 +244,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ac97_bus: ac97-bus {
+ ac97_bus: ac97-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -252,7 +252,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -260,7 +260,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm2_bus: pcm2-bus {
+ pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -268,105 +268,105 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spdif_bus: spdif-bus {
+ spdif_bus: spdif-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c6_bus: i2c6-bus {
+ i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpd0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_ctrl: lcd-ctrl {
+ lcd_ctrl: lcd-ctrl-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c7_bus: i2c7-bus {
+ i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- mipi0_clk: mipi0-clk {
+ mipi0_clk: mipi0-clk-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- mipi1_clk: mipi1-clk {
+ mipi1_clk: mipi1-clk-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_clk: lcd-clk {
+ lcd_clk: lcd-clk-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data16: lcd-data-width16 {
+ lcd_data16: lcd-data-width16-pins {
samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
@@ -376,7 +376,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data18: lcd-data-width18 {
+ lcd_data18: lcd-data-width18-pins {
samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
@@ -387,7 +387,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data24: lcd-data-width24 {
+ lcd_data24: lcd-data-width24-pins {
samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
@@ -399,14 +399,14 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_ldi: lcd-ldi {
+ lcd_ldi: lcd-ldi-pins {
samsung,pins = "gpf3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a_io: cam-port-a-io {
+ cam_port_a_io: cam-port-a-io-pins {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -415,14 +415,14 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a_clk_active: cam-port-a-clk-active {
+ cam_port_a_clk_active: cam-port-a-clk-active-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_a_clk_idle: cam-port-a-clk-idle {
+ cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -431,7 +431,7 @@
};
&pinctrl_1 {
- gpk0: gpk0 {
+ gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -439,7 +439,7 @@
#interrupt-cells = <2>;
};
- gpk1: gpk1 {
+ gpk1: gpk1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -447,7 +447,7 @@
#interrupt-cells = <2>;
};
- gpk2: gpk2 {
+ gpk2: gpk2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -455,7 +455,7 @@
#interrupt-cells = <2>;
};
- gpk3: gpk3 {
+ gpk3: gpk3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -463,7 +463,7 @@
#interrupt-cells = <2>;
};
- gpl0: gpl0 {
+ gpl0: gpl0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -471,7 +471,7 @@
#interrupt-cells = <2>;
};
- gpl1: gpl1 {
+ gpl1: gpl1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -479,7 +479,7 @@
#interrupt-cells = <2>;
};
- gpl2: gpl2 {
+ gpl2: gpl2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -487,7 +487,7 @@
#interrupt-cells = <2>;
};
- gpm0: gpm0 {
+ gpm0: gpm0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -495,7 +495,7 @@
#interrupt-cells = <2>;
};
- gpm1: gpm1 {
+ gpm1: gpm1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -503,7 +503,7 @@
#interrupt-cells = <2>;
};
- gpm2: gpm2 {
+ gpm2: gpm2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -511,7 +511,7 @@
#interrupt-cells = <2>;
};
- gpm3: gpm3 {
+ gpm3: gpm3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -519,7 +519,7 @@
#interrupt-cells = <2>;
};
- gpm4: gpm4 {
+ gpm4: gpm4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -527,42 +527,42 @@
#interrupt-cells = <2>;
};
- gpy0: gpy0 {
+ gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy1: gpy1 {
+ gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy2: gpy2 {
+ gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy3: gpy3 {
+ gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy4: gpy4 {
+ gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy5: gpy5 {
+ gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy6: gpy6 {
+ gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -579,7 +579,7 @@
#interrupt-cells = <2>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -596,7 +596,7 @@
#interrupt-cells = <2>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -604,7 +604,7 @@
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -612,203 +612,203 @@
#interrupt-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_clk: sd4-clk {
+ sd4_clk: sd4-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_cmd: sd4-cmd {
+ sd4_cmd: sd4-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_cd: sd4-cd {
+ sd4_cd: sd4-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_bus1: sd4-bus-width1 {
+ sd4_bus1: sd4-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_bus4: sd4-bus-width4 {
+ sd4_bus4: sd4-bus-width4-pins {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_bus8: sd4-bus-width8 {
+ sd4_bus8: sd4-bus-width8-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpk1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpk1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpk1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpk1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpk2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpk2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpk2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpk2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus8: sd2-bus-width8 {
+ sd2_bus8: sd2-bus-width8-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_clk: sd3-clk {
+ sd3_clk: sd3-clk-pins {
samsung,pins = "gpk3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cmd: sd3-cmd {
+ sd3_cmd: sd3-cmd-pins {
samsung,pins = "gpk3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cd: sd3-cd {
+ sd3_cd: sd3-cd-pins {
samsung,pins = "gpk3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus1: sd3-bus-width1 {
+ sd3_bus1: sd3-bus-width1-pins {
samsung,pins = "gpk3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus4: sd3-bus-width4 {
+ sd3_bus4: sd3-bus-width4-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_b_io: cam-port-b-io {
+ cam_port_b_io: cam-port-b-io-pins {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
@@ -817,77 +817,77 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_b_clk_active: cam-port-b-clk-active {
+ cam_port_b_clk_active: cam-port-b-clk-active-pins {
samsung,pins = "gpm2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_b_clk_idle: cam-port-b-clk-idle {
+ cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
samsung,pins = "gpm2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint0: ext-int0 {
+ eint0: ext-int0-pins {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint8: ext-int8 {
+ eint8: ext-int8-pins {
samsung,pins = "gpx1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint15: ext-int15 {
+ eint15: ext-int15-pins {
samsung,pins = "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint16: ext-int16 {
+ eint16: ext-int16-pins {
samsung,pins = "gpx2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint31: ext-int31 {
+ eint31: ext-int31-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fimc_is_i2c0: fimc-is-i2c0 {
+ fimc_is_i2c0: fimc-is-i2c0-pins {
samsung,pins = "gpm4-0", "gpm4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fimc_is_i2c1: fimc-is-i2c1 {
+ fimc_is_i2c1: fimc-is-i2c1-pins {
samsung,pins = "gpm4-2", "gpm4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fimc_is_uart: fimc-is-uart {
+ fimc_is_uart: fimc-is-uart-pins {
samsung,pins = "gpm3-5", "gpm3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_cec: hdmi-cec {
+ hdmi_cec: hdmi-cec-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -896,7 +896,7 @@
};
&pinctrl_2 {
- gpz: gpz {
+ gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -904,7 +904,7 @@
#interrupt-cells = <2>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -912,7 +912,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm0_bus: pcm0-bus {
+ pcm0_bus: pcm0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -922,7 +922,7 @@
};
&pinctrl_3 {
- gpv0: gpv0 {
+ gpv0: gpv0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -930,7 +930,7 @@
#interrupt-cells = <2>;
};
- gpv1: gpv1 {
+ gpv1: gpv1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -938,7 +938,7 @@
#interrupt-cells = <2>;
};
- gpv2: gpv2 {
+ gpv2: gpv2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -946,7 +946,7 @@
#interrupt-cells = <2>;
};
- gpv3: gpv3 {
+ gpv3: gpv3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -954,7 +954,7 @@
#interrupt-cells = <2>;
};
- gpv4: gpv4 {
+ gpv4: gpv4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -962,7 +962,7 @@
#interrupt-cells = <2>;
};
- c2c_bus: c2c-bus {
+ c2c_bus: c2c-bus-pins {
samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index cc99b955af0c..a40ff394977c 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -133,14 +133,14 @@
};
&pinctrl_1 {
- keypad_rows: keypad-rows {
+ keypad_rows: keypad-rows-pins {
samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_cols: keypad-cols {
+ keypad_cols: keypad-cols-pins {
samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
"gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index d3802046c8b8..aa0b61b59970 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -813,7 +813,7 @@
interrupt-parent = <&combiner>;
interrupts = <2 4>;
reg = <0x100C0000 0x100>;
- clocks = <&clock 383>;
+ clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 3583095fbb2a..f7795f2d0f0e 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -590,7 +590,7 @@
};
&pinctrl_0 {
- s5m8767_irq: s5m8767-irq {
+ s5m8767_irq: s5m8767-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
@@ -632,3 +632,8 @@
#size-cells = <0>;
};
};
+
+&usbdrd {
+ vdd10-supply = <&ldo15_reg>;
+ vdd33-supply = <&ldo12_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index d31a68672bfa..918947a3897e 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -20,7 +20,7 @@
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -28,7 +28,7 @@
#interrupt-cells = <2>;
};
- gpa2: gpa2 {
+ gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -36,7 +36,7 @@
#interrupt-cells = <2>;
};
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -44,7 +44,7 @@
#interrupt-cells = <2>;
};
- gpb1: gpb1 {
+ gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -52,7 +52,7 @@
#interrupt-cells = <2>;
};
- gpb2: gpb2 {
+ gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -60,7 +60,7 @@
#interrupt-cells = <2>;
};
- gpb3: gpb3 {
+ gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -68,7 +68,7 @@
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -76,7 +76,7 @@
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -84,7 +84,7 @@
#interrupt-cells = <2>;
};
- gpc2: gpc2 {
+ gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -92,7 +92,7 @@
#interrupt-cells = <2>;
};
- gpc3: gpc3 {
+ gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -100,7 +100,7 @@
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -108,7 +108,7 @@
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -116,42 +116,42 @@
#interrupt-cells = <2>;
};
- gpy0: gpy0 {
+ gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy1: gpy1 {
+ gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy2: gpy2 {
+ gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy3: gpy3 {
+ gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy4: gpy4 {
+ gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy5: gpy5 {
+ gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy6: gpy6 {
+ gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpc4: gpc4 {
+ gpc4: gpc4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -159,7 +159,7 @@
#interrupt-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -170,7 +170,7 @@
<26 0>, <26 1>, <27 0>, <27 1>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -181,7 +181,7 @@
<30 0>, <30 1>, <31 0>, <31 1>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -189,7 +189,7 @@
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -197,104 +197,104 @@
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_hs_bus: i2c2-hs-bus {
+ i2c2_hs_bus: i2c2-hs-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_gpio_bus: i2c2-gpio-bus {
+ i2c2_gpio_bus: i2c2-gpio-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c3_bus: i2c3-bus {
+ i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c3_hs_bus: i2c3-hs-bus {
+ i2c3_hs_bus: i2c3-hs-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
- samsung,pins = "gpa1-4", "gpa1-4";
+ uart3_data: uart3-data-pins {
+ samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c4_bus: i2c4-bus {
+ i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpa2-0", "gpa2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c5_bus: i2c5-bus {
+ i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -302,7 +302,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -310,7 +310,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ac97_bus: ac97-bus {
+ ac97_bus: ac97-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -318,7 +318,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
"gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -326,7 +326,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm2_bus: pcm2-bus {
+ pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
"gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -334,280 +334,280 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spdif_bus: spdif-bus {
+ spdif_bus: spdif-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c6_bus: i2c6-bus {
+ i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpb1-3", "gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpb2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpb2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpb2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c7_bus: i2c7-bus {
+ i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpb2-2", "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c0_hs_bus: i2c0-hs-bus {
+ i2c0_hs_bus: i2c0-hs-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c1_hs_bus: i2c1-hs-bus {
+ i2c1_hs_bus: i2c1-hs-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpc0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpc0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpc0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpc2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpc2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpc3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpc3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpc3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus8: sd2-bus-width8 {
+ sd2_bus8: sd2-bus-width8-pins {
samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_clk: sd3-clk {
+ sd3_clk: sd3-clk-pins {
samsung,pins = "gpc4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cmd: sd3-cmd {
+ sd3_cmd: sd3-cmd-pins {
samsung,pins = "gpc4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cd: sd3-cd {
+ sd3_cd: sd3-cd-pins {
samsung,pins = "gpc4-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus1: sd3-bus-width1 {
+ sd3_bus1: sd3-bus-width1-pins {
samsung,pins = "gpc4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus4: sd3-bus-width4 {
+ sd3_bus4: sd3-bus-width4-pins {
samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- dp_hpd: dp_hpd {
+ dp_hpd: dp-hpd-pins {
samsung,pins = "gpx0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_cec: hdmi-cec {
+ hdmi_cec: hdmi-cec-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_hpd: hdmi-hpd {
+ hdmi_hpd: hdmi-hpd-pins {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
};
&pinctrl_1 {
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -615,7 +615,7 @@
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -623,7 +623,7 @@
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -631,7 +631,7 @@
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -639,7 +639,7 @@
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -647,7 +647,7 @@
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -655,7 +655,7 @@
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -663,7 +663,7 @@
#interrupt-cells = <2>;
};
- gph0: gph0 {
+ gph0: gph0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -671,7 +671,7 @@
#interrupt-cells = <2>;
};
- gph1: gph1 {
+ gph1: gph1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -679,7 +679,7 @@
#interrupt-cells = <2>;
};
- cam_gpio_a: cam-gpio-a {
+ cam_gpio_a: cam-gpio-a-pins {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1";
@@ -688,7 +688,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_gpio_b: cam-gpio-b {
+ cam_gpio_b: cam-gpio-b-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -696,42 +696,42 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_i2c2_bus: cam-i2c2-bus {
+ cam_i2c2_bus: cam-i2c2-bus-pins {
samsung,pins = "gpe0-6", "gpe1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_spi1_bus: cam-spi1-bus {
+ cam_spi1_bus: cam-spi1-bus-pins {
samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_i2c1_bus: cam-i2c1-bus {
+ cam_i2c1_bus: cam-i2c1-bus-pins {
samsung,pins = "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_i2c0_bus: cam-i2c0-bus {
+ cam_i2c0_bus: cam-i2c0-bus-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_spi0_bus: cam-spi0-bus {
+ cam_spi0_bus: cam-spi0-bus-pins {
samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_bayrgb_bus: cam-bayrgb-bus {
+ cam_bayrgb_bus: cam-bayrgb-bus-pins {
samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
"gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
"gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
@@ -742,7 +742,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a: cam-port-a {
+ cam_port_a: cam-port-a-pins {
samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
"gph1-0", "gph1-1", "gph1-2", "gph1-3",
"gph1-4", "gph1-5", "gph1-6", "gph1-7";
@@ -753,7 +753,7 @@
};
&pinctrl_2 {
- gpv0: gpv0 {
+ gpv0: gpv0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -761,7 +761,7 @@
#interrupt-cells = <2>;
};
- gpv1: gpv1 {
+ gpv1: gpv1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -769,7 +769,7 @@
#interrupt-cells = <2>;
};
- gpv2: gpv2 {
+ gpv2: gpv2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -777,7 +777,7 @@
#interrupt-cells = <2>;
};
- gpv3: gpv3 {
+ gpv3: gpv3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -785,7 +785,7 @@
#interrupt-cells = <2>;
};
- gpv4: gpv4 {
+ gpv4: gpv4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -793,7 +793,7 @@
#interrupt-cells = <2>;
};
- c2c_rxd: c2c-rxd {
+ c2c_rxd: c2c-rxd-pins {
samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
@@ -803,7 +803,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- c2c_txd: c2c-txd {
+ c2c_txd: c2c-txd-pins {
samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
@@ -815,7 +815,7 @@
};
&pinctrl_3 {
- gpz: gpz {
+ gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -823,7 +823,7 @@
#interrupt-cells = <2>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 39bbe18145cf..21fbbf3d8684 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -118,6 +118,9 @@
status = "okay";
ddc = <&i2c_2>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
};
&i2c_0 {
@@ -410,10 +413,15 @@
};
&pinctrl_0 {
- max77686_irq: max77686-irq {
+ max77686_irq: max77686-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
+
+&usbdrd {
+ vdd10-supply = <&ldo15_reg>;
+ vdd33-supply = <&ldo12_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 2335c4687349..c15ecfc4077d 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -587,63 +587,63 @@
};
&pinctrl_0 {
- wifi_en: wifi-en {
+ wifi_en: wifi-en-pins {
samsung,pins = "gpx0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- wifi_rst: wifi-rst {
+ wifi_rst: wifi-rst-pins {
samsung,pins = "gpx0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- power_key_irq: power-key-irq {
+ power_key_irq: power-key-irq-pins {
samsung,pins = "gpx1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ec_irq: ec-irq {
+ ec_irq: ec-irq-pins {
samsung,pins = "gpx1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- tps65090_irq: tps65090-irq {
+ tps65090_irq: tps65090-irq-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- usb3_vbus_en: usb3-vbus-en {
+ usb3_vbus_en: usb3-vbus-en-pins {
samsung,pins = "gpx2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- max77686_irq: max77686-irq {
+ max77686_irq: max77686-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lid_irq: lid-irq {
+ lid_irq: lid-irq-pins {
samsung,pins = "gpx3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -652,14 +652,14 @@
};
&pinctrl_1 {
- arb_their_claim: arb-their-claim {
+ arb_their_claim: arb-their-claim-pins {
samsung,pins = "gpe0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- arb_our_claim: arb-our-claim {
+ arb_our_claim: arb-our-claim-pins {
samsung,pins = "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -698,6 +698,11 @@
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
};
+&usbdrd {
+ vdd10-supply = <&ldo15_reg>;
+ vdd33-supply = <&ldo12_reg>;
+};
+
&usbdrd_dwc3 {
dr_mode = "host";
};
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index f8ca61df6981..0a47597d6f0d 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -47,7 +47,7 @@
};
&pinctrl_0 {
- max98090_irq: max98090-irq {
+ max98090_irq: max98090-irq-pins {
samsung,pins = "gpx0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index a630bc654a49..906aa7aae710 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -43,7 +43,7 @@
};
&pinctrl_0 {
- max98095_en: max98095-en {
+ max98095_en: max98095-en-pins {
samsung,pins = "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index e0feedcf54bb..24609bb20158 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -451,63 +451,63 @@
};
&pinctrl_0 {
- s5m8767_dvs: s5m8767-dvs {
+ s5m8767_dvs: s5m8767-dvs-pins {
samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- dp_hpd_gpio: dp-hpd {
+ dp_hpd_gpio: dp-hpd-pins {
samsung,pins = "gpc3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- trackpad_irq: trackpad-irq {
+ trackpad_irq: trackpad-irq-pins {
samsung,pins = "gpx1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- power_key_irq: power-key-irq {
+ power_key_irq: power-key-irq-pins {
samsung,pins = "gpx1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ec_irq: ec-irq {
+ ec_irq: ec-irq-pins {
samsung,pins = "gpx1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- s5m8767_ds: s5m8767-ds {
+ s5m8767_ds: s5m8767-ds-pins {
samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- s5m8767_irq: s5m8767-irq {
+ s5m8767_irq: s5m8767-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lid_irq: lid-irq {
+ lid_irq: lid-irq-pins {
samsung,pins = "gpx3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -516,7 +516,7 @@
};
&pinctrl_1 {
- hsic_reset: hsic-reset {
+ hsic_reset: hsic-reset-pins {
samsung,pins = "gpe1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -553,4 +553,9 @@
num-cs = <1>;
};
+&usbdrd {
+ vdd10-supply = <&ldo15_reg>;
+ vdd33-supply = <&ldo12_reg>;
+};
+
#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 139778928b93..5baaa7eb71a4 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -496,8 +496,7 @@
status = "disabled";
reg = <0x12d20000 0x100>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&pdma0 5
- &pdma0 4>;
+ dmas = <&pdma0 5>, <&pdma0 4>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
@@ -512,8 +511,7 @@
status = "disabled";
reg = <0x12d30000 0x100>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&pdma1 5
- &pdma1 4>;
+ dmas = <&pdma1 5>, <&pdma1 4>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
@@ -528,8 +526,7 @@
status = "disabled";
reg = <0x12d40000 0x100>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&pdma0 7
- &pdma0 6>;
+ dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
@@ -637,7 +634,7 @@
#sound-dai-cells = <1>;
};
- usb_dwc3 {
+ usbdrd: usb3 {
compatible = "samsung,exynos5250-dwusb3";
clocks = <&clock CLK_USB3>;
clock-names = "usbdrd30";
@@ -695,7 +692,7 @@
samsung,pmureg-phandle = <&pmu_system_controller>;
};
- pdma0: pdma@121a0000 {
+ pdma0: dma-controller@121a0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
@@ -706,7 +703,7 @@
#dma-requests = <32>;
};
- pdma1: pdma@121b0000 {
+ pdma1: dma-controller@121b0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
@@ -717,7 +714,7 @@
#dma-requests = <32>;
};
- mdma0: mdma@10800000 {
+ mdma0: dma-controller@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
@@ -728,7 +725,7 @@
#dma-requests = <1>;
};
- mdma1: mdma@11c10000 {
+ mdma1: dma-controller@11c10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index 17e2f3e0d71e..150607f8103d 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -20,7 +20,7 @@
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -28,7 +28,7 @@
#interrupt-cells = <2>;
};
- gpa2: gpa2 {
+ gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -36,7 +36,7 @@
#interrupt-cells = <2>;
};
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -44,7 +44,7 @@
#interrupt-cells = <2>;
};
- gpb1: gpb1 {
+ gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -52,7 +52,7 @@
#interrupt-cells = <2>;
};
- gpb2: gpb2 {
+ gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -60,7 +60,7 @@
#interrupt-cells = <2>;
};
- gpb3: gpb3 {
+ gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -68,7 +68,7 @@
#interrupt-cells = <2>;
};
- gpb4: gpb4 {
+ gpb4: gpb4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -76,7 +76,7 @@
#interrupt-cells = <2>;
};
- gpb5: gpb5 {
+ gpb5: gpb5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -84,7 +84,7 @@
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -92,7 +92,7 @@
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -100,7 +100,7 @@
#interrupt-cells = <2>;
};
- gpd2: gpd2 {
+ gpd2: gpd2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -108,7 +108,7 @@
#interrupt-cells = <2>;
};
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -116,7 +116,7 @@
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -124,7 +124,7 @@
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -132,7 +132,7 @@
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -140,7 +140,7 @@
#interrupt-cells = <2>;
};
- gpk0: gpk0 {
+ gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -148,7 +148,7 @@
#interrupt-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -164,7 +164,7 @@
#interrupt-cells = <2>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -180,7 +180,7 @@
#interrupt-cells = <2>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -188,7 +188,7 @@
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -196,63 +196,63 @@
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- usb3_vbus0_en: usb3-vbus0-en {
+ usb3_vbus0_en: usb3-vbus0-en-pins {
samsung,pins = "gpa2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -260,7 +260,7 @@
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -268,105 +268,105 @@
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- spdif1_bus: spdif1-bus {
+ spdif1_bus: spdif1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c0_hs_bus: i2c0-hs-bus {
+ i2c0_hs_bus: i2c0-hs-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c1_hs_bus: i2c1-hs-bus {
+ i2c1_hs_bus: i2c1-hs-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c2_hs_bus: i2c2-hs-bus {
+ i2c2_hs_bus: i2c2-hs-bus-pins {
samsung,pins = "gpb3-4", "gpb3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c3_hs_bus: i2c3-hs-bus {
+ i2c3_hs_bus: i2c3-hs-bus-pins {
samsung,pins = "gpb3-6", "gpb3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c4_bus: i2c4-bus {
+ i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb4-0", "gpb4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c5_bus: i2c5-bus {
+ i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb4-2", "gpb4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c6_bus: i2c6-bus {
+ i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpb4-4", "gpb4-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c7_bus: i2c7-bus {
+ i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpb4-6", "gpb4-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c8_bus: i2c8-bus {
+ i2c8_bus: i2c8-bus-pins {
samsung,pins = "gpb5-0", "gpb5-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c9_bus: i2c9-bus {
+ i2c9_bus: i2c9-bus-pins {
samsung,pins = "gpb5-2", "gpb5-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c10_bus: i2c10-bus {
+ i2c10_bus: i2c10-bus-pins {
samsung,pins = "gpb5-4", "gpb5-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c11_bus: i2c11-bus {
+ i2c11_bus: i2c11-bus-pins {
samsung,pins = "gpb5-6", "gpb5-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_gpio_a: cam-gpio-a {
+ cam_gpio_a: cam-gpio-a-pins {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1";
@@ -375,7 +375,7 @@
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_gpio_b: cam-gpio-b {
+ cam_gpio_b: cam-gpio-b-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -383,28 +383,28 @@
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_i2c1_bus: cam-i2c1-bus {
+ cam_i2c1_bus: cam-i2c1-bus-pins {
samsung,pins = "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_i2c0_bus: cam-i2c0-bus {
+ cam_i2c0_bus: cam-i2c0-bus-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_spi0_bus: cam-spi0-bus {
+ cam_spi0_bus: cam-spi0-bus-pins {
samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_spi1_bus: cam-spi1-bus {
+ cam_spi1_bus: cam-spi1-bus-pins {
samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -413,7 +413,7 @@
};
&pinctrl_1 {
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -421,7 +421,7 @@
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -429,7 +429,7 @@
#interrupt-cells = <2>;
};
- gpc2: gpc2 {
+ gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -437,7 +437,7 @@
#interrupt-cells = <2>;
};
- gpc3: gpc3 {
+ gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -445,7 +445,7 @@
#interrupt-cells = <2>;
};
- gpc4: gpc4 {
+ gpc4: gpc4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -453,112 +453,112 @@
#interrupt-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpc0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpc0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_rdqs: sd0-rdqs {
+ sd0_rdqs: sd0-rdqs-pins {
samsung,pins = "gpc0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpc1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpc1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_bus8: sd1-bus-width8 {
+ sd1_bus8: sd1-bus-width8-pins {
samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpc2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -567,7 +567,7 @@
};
&pinctrl_2 {
- gpz0: gpz0 {
+ gpz0: gpz0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -575,7 +575,7 @@
#interrupt-cells = <2>;
};
- gpz1: gpz1 {
+ gpz1: gpz1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 0dc2ec16aa0a..3c3b751d4360 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -29,6 +29,27 @@
#clock-cells = <0>;
};
+ ioclk_pcm: clock-pcm-ext {
+ compatible = "fixed-clock";
+ clock-frequency = <2048000>;
+ clock-output-names = "ioclk_pcm_extclk";
+ #clock-cells = <0>;
+ };
+
+ ioclk_i2s: clock-i2s-cd {
+ compatible = "fixed-clock";
+ clock-frequency = <147456000>;
+ clock-output-names = "ioclk_i2s_cdclk";
+ #clock-cells = <0>;
+ };
+
+ ioclk_spdif: clock-spdif-ext {
+ compatible = "fixed-clock";
+ clock-frequency = <49152000>;
+ clock-output-names = "ioclk_spdif_extclk";
+ #clock-cells = <0>;
+ };
+
xrtcxti: xrtcxti {
compatible = "fixed-clock";
clock-frequency = <32768>;
@@ -38,7 +59,7 @@
};
&pinctrl_0 {
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 524d244050e0..56271e7c4587 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -113,78 +113,206 @@
compatible = "samsung,exynos5260-clock-top";
reg = <0x10010000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_mif MIF_DOUT_MEM_PLL>,
+ <&clock_mif MIF_DOUT_BUS_PLL>,
+ <&clock_mif MIF_DOUT_MEDIA_PLL>;
+ clock-names = "fin_pll",
+ "dout_mem_pll",
+ "dout_bus_pll",
+ "dout_media_pll";
};
clock_peri: clock-controller@10200000 {
compatible = "samsung,exynos5260-clock-peri";
reg = <0x10200000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&ioclk_pcm>,
+ <&ioclk_i2s>,
+ <&ioclk_spdif>,
+ <&fin_pll>,
+ <&clock_top TOP_DOUT_ACLK_PERI_66>,
+ <&clock_top TOP_DOUT_SCLK_PERI_UART0>,
+ <&clock_top TOP_DOUT_SCLK_PERI_UART1>,
+ <&clock_top TOP_DOUT_SCLK_PERI_UART2>,
+ <&clock_top TOP_DOUT_SCLK_PERI_SPI0_B>,
+ <&clock_top TOP_DOUT_SCLK_PERI_SPI1_B>,
+ <&clock_top TOP_DOUT_SCLK_PERI_SPI2_B>,
+ <&clock_top TOP_DOUT_ACLK_PERI_AUD>;
+ clock-names = "fin_pll",
+ "ioclk_pcm_extclk",
+ "ioclk_i2s_cdclk",
+ "ioclk_spdif_extclk",
+ "phyclk_hdmi_phy_ref_cko",
+ "dout_aclk_peri_66",
+ "dout_sclk_peri_uart0",
+ "dout_sclk_peri_uart1",
+ "dout_sclk_peri_uart2",
+ "dout_sclk_peri_spi0_b",
+ "dout_sclk_peri_spi1_b",
+ "dout_sclk_peri_spi2_b",
+ "dout_aclk_peri_aud";
};
clock_egl: clock-controller@10600000 {
compatible = "samsung,exynos5260-clock-egl";
reg = <0x10600000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_mif MIF_DOUT_BUS_PLL>;
+ clock-names = "fin_pll",
+ "dout_bus_pll";
};
clock_kfc: clock-controller@10700000 {
compatible = "samsung,exynos5260-clock-kfc";
reg = <0x10700000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_mif MIF_DOUT_MEDIA_PLL>;
+ clock-names = "fin_pll",
+ "dout_media_pll";
};
clock_g2d: clock-controller@10a00000 {
compatible = "samsung,exynos5260-clock-g2d";
reg = <0x10A00000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_top TOP_DOUT_ACLK_G2D_333>;
+ clock-names = "fin_pll",
+ "dout_aclk_g2d_333";
};
clock_mif: clock-controller@10ce0000 {
compatible = "samsung,exynos5260-clock-mif";
reg = <0x10CE0000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>;
+ clock-names = "fin_pll";
};
clock_mfc: clock-controller@11090000 {
compatible = "samsung,exynos5260-clock-mfc";
reg = <0x11090000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_top TOP_DOUT_ACLK_MFC_333>;
+ clock-names = "fin_pll",
+ "dout_aclk_mfc_333";
};
clock_g3d: clock-controller@11830000 {
compatible = "samsung,exynos5260-clock-g3d";
reg = <0x11830000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>;
+ clock-names = "fin_pll";
};
clock_fsys: clock-controller@122e0000 {
compatible = "samsung,exynos5260-clock-fsys";
reg = <0x122E0000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&clock_top TOP_DOUT_ACLK_FSYS_200>;
+ clock-names = "fin_pll",
+ "phyclk_usbhost20_phy_phyclock",
+ "phyclk_usbhost20_phy_freeclk",
+ "phyclk_usbhost20_phy_clk48mohci",
+ "phyclk_usbdrd30_udrd30_pipe_pclk",
+ "phyclk_usbdrd30_udrd30_phyclock",
+ "dout_aclk_fsys_200";
};
clock_aud: clock-controller@128c0000 {
compatible = "samsung,exynos5260-clock-aud";
reg = <0x128C0000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_top TOP_FOUT_AUD_PLL>,
+ <&ioclk_i2s>,
+ <&ioclk_pcm>;
+ clock-names = "fin_pll",
+ "fout_aud_pll",
+ "ioclk_i2s_cdclk",
+ "ioclk_pcm_extclk";
};
clock_isp: clock-controller@133c0000 {
compatible = "samsung,exynos5260-clock-isp";
reg = <0x133C0000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_top TOP_DOUT_ACLK_ISP1_266>,
+ <&clock_top TOP_DOUT_ACLK_ISP1_400>,
+ <&clock_top TOP_MOUT_ACLK_ISP1_266>;
+ clock-names = "fin_pll",
+ "dout_aclk_isp1_266",
+ "dout_aclk_isp1_400",
+ "mout_aclk_isp1_266";
};
clock_gscl: clock-controller@13f00000 {
compatible = "samsung,exynos5260-clock-gscl";
reg = <0x13F00000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_top TOP_DOUT_ACLK_GSCL_400>,
+ <&clock_top TOP_DOUT_ACLK_GSCL_333>;
+ clock-names = "fin_pll",
+ "dout_aclk_gscl_400",
+ "dout_aclk_gscl_333";
};
clock_disp: clock-controller@14550000 {
compatible = "samsung,exynos5260-clock-disp";
reg = <0x14550000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&ioclk_spdif>,
+ <&clock_top TOP_DOUT_ACLK_PERI_AUD>,
+ <&clock_top TOP_DOUT_ACLK_DISP_222>,
+ <&clock_top TOP_DOUT_SCLK_DISP_PIXEL>,
+ <&clock_top TOP_DOUT_ACLK_DISP_333>;
+ clock-names = "fin_pll",
+ "phyclk_dptx_phy_ch3_txd_clk",
+ "phyclk_dptx_phy_ch2_txd_clk",
+ "phyclk_dptx_phy_ch1_txd_clk",
+ "phyclk_dptx_phy_ch0_txd_clk",
+ "phyclk_hdmi_phy_tmds_clko",
+ "phyclk_hdmi_phy_ref_clko",
+ "phyclk_hdmi_phy_pixel_clko",
+ "phyclk_hdmi_link_o_tmds_clkhi",
+ "phyclk_mipi_dphy_4l_m_txbyte_clkhs",
+ "phyclk_dptx_phy_o_ref_clk_24m",
+ "phyclk_dptx_phy_clk_div2",
+ "phyclk_mipi_dphy_4l_m_rxclkesc0",
+ "phyclk_hdmi_phy_ref_cko",
+ "ioclk_spdif_extclk",
+ "dout_aclk_peri_aud",
+ "dout_aclk_disp_222",
+ "dout_sclk_disp_pixel",
+ "dout_aclk_disp_333";
};
gic: interrupt-controller@10481000 {
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 884fef55836c..e54a3391854d 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -188,8 +188,7 @@
interrupt-parent = <&gpx0>;
interrupts = <4 IRQ_TYPE_NONE>;
pinctrl-names = "default";
- pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
- <&pmic_dvs_3>;
+ pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>;
wakeup-source;
#clock-cells = <1>;
@@ -394,10 +393,6 @@
regulator-always-on;
};
- ldo16_reg: LDO16 {
- regulator-name = "ldo16";
- };
-
ldo17_reg: LDO17 {
regulator-name = "cam_sensor_core";
regulator-min-microvolt = <1200000>;
@@ -427,10 +422,6 @@
regulator-max-microvolt = <2850000>;
};
- ldo22_reg: LDO22 {
- regulator-name = "ldo22";
- };
-
ldo23_reg: LDO23 {
regulator-name = "dp_p3v3";
regulator-min-microvolt = <3300000>;
@@ -477,10 +468,6 @@
regulator-always-on;
};
- ldo31_reg: LDO31 {
- regulator-name = "ldo31";
- };
-
/* On revisions with ti,ina231 this is sensor VS */
ldo32_reg: LDO32 {
regulator-name = "vs_power_meter";
@@ -548,14 +535,14 @@
};
&pinctrl_0 {
- emmc_nrst_pin: emmc-nrst {
+ emmc_nrst_pin: emmc-nrst-pins {
samsung,pins = "gpd1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- sd2_wp: sd2-wp {
+ sd2_wp: sd2-wp-pins {
samsung,pins = "gpm5-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
/* Pin is floating so be sure to disable write-protect */
@@ -563,21 +550,14 @@
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- pmic_dvs_3: pmic-dvs-3 {
- samsung,pins = "gpx0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- pmic_dvs_2: pmic-dvs-2 {
- samsung,pins = "gpx0-1";
+ pmic_dvs_2: pmic-dvs-2-pins {
+ samsung,pins = "gpx0-0", "gpx0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pmic_dvs_1: pmic-dvs-1 {
+ pmic_dvs_1: pmic-dvs-1-pins {
samsung,pins = "gpx0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -585,7 +565,7 @@
samsung,pin-val = <1>;
};
- max77802_irq: max77802-irq {
+ max77802_irq: max77802-irq-pins {
samsung,pins = "gpx0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index 9599ba8ba798..6c7814b4372e 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -9,7 +9,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -17,7 +17,7 @@
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -25,7 +25,7 @@
#interrupt-cells = <2>;
};
- gpa2: gpa2 {
+ gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -33,7 +33,7 @@
#interrupt-cells = <2>;
};
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -41,7 +41,7 @@
#interrupt-cells = <2>;
};
- gpb1: gpb1 {
+ gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -49,7 +49,7 @@
#interrupt-cells = <2>;
};
- gpb2: gpb2 {
+ gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -57,7 +57,7 @@
#interrupt-cells = <2>;
};
- gpb3: gpb3 {
+ gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -65,7 +65,7 @@
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -73,7 +73,7 @@
#interrupt-cells = <2>;
};
- gpc3: gpc3 {
+ gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -81,7 +81,7 @@
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -89,7 +89,7 @@
#interrupt-cells = <2>;
};
- gpc2: gpc2 {
+ gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -97,12 +97,12 @@
#interrupt-cells = <2>;
};
- gpm5: gpm5 {
+ gpm5: gpm5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -110,7 +110,7 @@
#interrupt-cells = <2>;
};
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -118,7 +118,7 @@
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -126,7 +126,7 @@
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -134,7 +134,7 @@
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -142,7 +142,7 @@
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -150,7 +150,7 @@
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -158,7 +158,7 @@
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -166,7 +166,7 @@
#interrupt-cells = <2>;
};
- gph0: gph0 {
+ gph0: gph0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -174,7 +174,7 @@
#interrupt-cells = <2>;
};
- gph1: gph1 {
+ gph1: gph1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -182,52 +182,52 @@
#interrupt-cells = <2>;
};
- gpm7: gpm7 {
+ gpm7: gpm7-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy0: gpy0 {
+ gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy1: gpy1 {
+ gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy2: gpy2 {
+ gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy3: gpy3 {
+ gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy4: gpy4 {
+ gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy5: gpy5 {
+ gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy6: gpy6 {
+ gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy7: gpy7 {
+ gpy7: gpy7-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -244,7 +244,7 @@
<27 1>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -261,7 +261,7 @@
<31 1>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -269,7 +269,7 @@
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -277,210 +277,210 @@
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c3_bus: i2c3-bus {
+ i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c4_hs_bus: i2c4-hs-bus {
+ i2c4_hs_bus: i2c4-hs-bus-pins {
samsung,pins = "gpa2-0", "gpa2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c5_hs_bus: i2c5-hs-bus {
+ i2c5_hs_bus: i2c5-hs-bus-pins {
samsung,pins = "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c6_hs_bus: i2c6-hs-bus {
+ i2c6_hs_bus: i2c6-hs-bus-pins {
samsung,pins = "gpb1-3", "gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpb2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpb2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpb2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c7_hs_bus: i2c7-hs-bus {
+ i2c7_hs_bus: i2c7-hs-bus-pins {
samsung,pins = "gpb2-2", "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpc0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpc0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpc0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpc2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -489,7 +489,7 @@
};
&pinctrl_1 {
- gpj0: gpj0 {
+ gpj0: gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -497,7 +497,7 @@
#interrupt-cells = <2>;
};
- gpj1: gpj1 {
+ gpj1: gpj1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -505,7 +505,7 @@
#interrupt-cells = <2>;
};
- gpj2: gpj2 {
+ gpj2: gpj2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -513,7 +513,7 @@
#interrupt-cells = <2>;
};
- gpj3: gpj3 {
+ gpj3: gpj3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -521,7 +521,7 @@
#interrupt-cells = <2>;
};
- gpj4: gpj4 {
+ gpj4: gpj4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -529,7 +529,7 @@
#interrupt-cells = <2>;
};
- gpk0: gpk0 {
+ gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -537,7 +537,7 @@
#interrupt-cells = <2>;
};
- gpk1: gpk1 {
+ gpk1: gpk1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -545,7 +545,7 @@
#interrupt-cells = <2>;
};
- gpk2: gpk2 {
+ gpk2: gpk2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -553,7 +553,7 @@
#interrupt-cells = <2>;
};
- gpk3: gpk3 {
+ gpk3: gpk3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -561,28 +561,28 @@
#interrupt-cells = <2>;
};
- usb3_1_oc: usb3-1-oc {
+ usb3_1_oc: usb3-1-oc-pins {
samsung,pins = "gpk2-4", "gpk2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- usb3_1_vbusctrl: usb3-1-vbusctrl {
+ usb3_1_vbusctrl: usb3-1-vbusctrl-pins {
samsung,pins = "gpk2-6", "gpk2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- usb3_0_oc: usb3-0-oc {
+ usb3_0_oc: usb3-0-oc-pins {
samsung,pins = "gpk3-0", "gpk3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- usb3_0_vbusctrl: usb3-0-vbusctrl {
+ usb3_0_vbusctrl: usb3-0-vbusctrl-pins {
samsung,pins = "gpk3-2", "gpk3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -591,7 +591,7 @@
};
&pinctrl_2 {
- gpv0: gpv0 {
+ gpv0: gpv0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -599,7 +599,7 @@
#interrupt-cells = <2>;
};
- gpv1: gpv1 {
+ gpv1: gpv1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -607,7 +607,7 @@
#interrupt-cells = <2>;
};
- gpv2: gpv2 {
+ gpv2: gpv2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -615,7 +615,7 @@
#interrupt-cells = <2>;
};
- gpv3: gpv3 {
+ gpv3: gpv3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -623,7 +623,7 @@
#interrupt-cells = <2>;
};
- gpv4: gpv4 {
+ gpv4: gpv4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -633,7 +633,7 @@
};
&pinctrl_3 {
- gpz: gpz {
+ gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -641,7 +641,7 @@
#interrupt-cells = <2>;
};
- audi2s0_bus: audi2s0-bus {
+ audi2s0_bus: audi2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4";
samsung,pin-function = <2>;
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 2a3ade77a2de..b8f953c41c73 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -41,6 +41,19 @@
reg = <0x02037000 0x1000>;
};
+ vdd10_usb3: voltage-regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD10_USB3";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vdd33_usb3: voltage-regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD33_USB3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
&mmc_0 {
@@ -66,14 +79,14 @@
};
&pinctrl_0 {
- srom_ctl: srom-ctl {
+ srom_ctl: srom-ctl-pins {
samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
"gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- srom_ebi: srom-ebi {
+ srom_ebi: srom-ebi-pins {
samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
"gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
"gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
@@ -121,3 +134,13 @@
&serial_2 {
status = "okay";
};
+
+&usbdrd3_0 {
+ vdd10-supply = <&vdd10_usb3>;
+ vdd33-supply = <&vdd33_usb3>;
+};
+
+&usbdrd3_1 {
+ vdd10-supply = <&vdd10_usb3>;
+ vdd33-supply = <&vdd33_usb3>;
+};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 584ce62361b1..4d797a9abba4 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -189,7 +189,7 @@
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
- pdma0: pdma@121a0000 {
+ pdma0: dma-controller@121a0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121a0000 0x1000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
@@ -200,7 +200,7 @@
#dma-requests = <32>;
};
- pdma1: pdma@121b0000 {
+ pdma1: dma-controller@121b0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121b0000 0x1000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index dfc7f14f5772..946b791faf85 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -808,7 +808,7 @@
};
&pinctrl_0 {
- s2mps11_irq: s2mps11-irq {
+ s2mps11_irq: s2mps11-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -825,3 +825,13 @@
&usbdrd_dwc3_1 {
dr_mode = "host";
};
+
+&usbdrd3_0 {
+ vdd10-supply = <&ldo11_reg>;
+ vdd33-supply = <&ldo9_reg>;
+};
+
+&usbdrd3_1 {
+ vdd10-supply = <&ldo11_reg>;
+ vdd33-supply = <&ldo9_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-chagall-wifi.dts b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
new file mode 100644
index 000000000000..1319344a2c74
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5420 Chagall WiFi board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420-galaxy-tab-common.dtsi"
+
+/ {
+ model = "Samsung Chagall WiFi based on Exynos5420";
+ compatible = "samsung,chagall-wifi", "samsung,exynos5420", \
+ "samsung,exynos5";
+};
+
+&ldo15_reg {
+ /* Unused */
+ regulator-name = "VDD_LDO15";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
+
+&ldo17_reg {
+ regulator-name = "VDD_IRLED_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+};
+
+&ldo28_reg {
+ /* Unused */
+ regulator-name = "VDD_LDO28";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
+
+&ldo29_reg {
+ regulator-name = "VDD_TCON_1V8";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+};
+
+&ldo31_reg {
+ regulator-name = "VDD_GRIP_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+};
+
+&ldo32_reg {
+ regulator-name = "VDD_TSP_1V8";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
new file mode 100644
index 000000000000..d19bc3d266fa
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Base DT for Samsung's family of tablets based on Exynos5420.
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+
+/ {
+ chassis-type = "tablet";
+
+ /*
+ * To successfully boot the mainline kernel with the stock
+ * bootloader (SBOOT), the tlb needs to be flushed after the
+ * page table pointer has been updated in __common_mmu_cache_on.
+ * The same hack is also needed to boot exynos4412-i9300 with
+ * stock bootloader, and probably other Samsung devices of
+ * similar age. See
+ * https://lore.kernel.org/all/1355276466-18295-1-git-send-email-arve@android.com
+ * for more details.
+ */
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory@20000000 {
+ device_type = "memory";
+ reg = <0x20000000 0xc0000000>;
+ };
+
+ firmware@2073000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x02073000 0x1000>;
+ };
+
+ fixed-rate-clocks {
+ oscclk {
+ compatible = "samsung,exynos5420-oscclk";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+
+ key-power {
+ debounce-interval = <10>;
+ gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+ label = "Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ key-home {
+ debounce-interval = <10>;
+ gpios = <&gpx0 5 GPIO_ACTIVE_LOW>;
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ wakeup-source;
+ };
+
+ key-volume-up {
+ debounce-interval = <10>;
+ gpios = <&gpx0 2 GPIO_ACTIVE_LOW>;
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ key-volume-down {
+ debounce-interval = <10>;
+ gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+};
+
+&cci {
+ /* CCI is disabled in hardware */
+ status = "disabled";
+};
+
+&cpu0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+ cpu-supply = <&buck6_reg>;
+};
+
+&gpu {
+ status = "okay";
+ mali-supply = <&buck4_reg>;
+};
+
+&hsi2c_7 {
+ status = "okay";
+
+ pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
+
+ s2mps11_osc: clocks {
+ compatible = "samsung,s2mps11-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap", "s2mps11_cp",
+ "s2mps11_bt";
+ };
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_1V1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VDD_ARM_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_INT_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VDD_G3D_1V0";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_MEM_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "VDD_KFC_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VIN_LLDO_1V4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VIN_MLDO_2V0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VIN_HLDO_3V5";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "VDD_CAM_ISP_1V0";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3550000>;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_APIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD_APIO_MMC01_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_ADC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo5_reg: LDO5 {
+ /* Unused */
+ regulator-name = "VDD_LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD_MIPI_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_MIPI_PLL_ABB1_18V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo8_reg: LDO8 {
+ /* Unused */
+ regulator-name = "VDD_LDO8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD_UOTG_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDDQ_PRE_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_HSIC_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_HSIC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDD_APIO_MMC2_2V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD_MOTOR_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD_LDO15";
+ /*
+ * LDO15 varies between devices and is
+ * specified in the device dts
+ */
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD_AP_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDD_LDO17";
+ /*
+ * LDO17 varies between devices and is
+ * specified in the device dts
+ */
+ };
+
+ ldo18_reg: LDO18 {
+ /* Unused */
+ regulator-name = "VDD_LDO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "VDD_VTF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VDD_CAM1_CAM_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VDD_CAM_IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "VDD_CAM0_S_CORE_1V1";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "VDD_MIFS_1V1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VDD_TSP_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo25_reg: LDO25 {
+ /* Unused */
+ regulator-name = "VDD_LDO25";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "VDD_CAM0_AF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "VDD_G3DS_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "VDD_LDO28";
+ /*
+ * LDO28 varies between devices and is
+ * specified in the device dts
+ */
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "VDD_LDO29";
+ /*
+ * LDO29 varies between devices and is
+ * specified in the device dts
+ */
+ };
+
+ ldo30_reg: LDO30 {
+ regulator-name = "VDD_TOUCH_1V8";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "VDD_LDO31";
+ /*
+ * LDO31 varies between devices and is
+ * specified in the device dts
+ */
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "VDD_LDO32";
+ /*
+ * LDO32 varies between devices and is
+ * specified in the device dts
+ */
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "VDD_MHL_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo34_reg: LDO34 {
+ regulator-name = "VDD_MHL_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "VDD_SIL_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo36_reg: LDO36 {
+ /* Unused */
+ regulator-name = "VDD_LDO36";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo37_reg: LDO37 {
+ /* Unused */
+ regulator-name = "VDD_LDO37";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "VDD_KEY_LED_3V3";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&mixer {
+ status = "okay";
+};
+
+/* Internal storage */
+&mmc_0 {
+ status = "okay";
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ card-detect-delay = <200>;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+ pinctrl-names = "default";
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ vqmmc-supply = <&ldo3_reg>;
+};
+
+/* External sdcard */
+&mmc_2 {
+ status = "okay";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ cd-gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &mmc2_cd &sd2_bus1 &sd2_bus4>;
+ pinctrl-names = "default";
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ sd-uhs-sdr50;
+ vmmc-supply = <&ldo19_reg>;
+ vqmmc-supply = <&ldo13_reg>;
+};
+
+&pinctrl_0 {
+ mmc2_cd: mmc2-cd-pins {
+ samsung,pins = "gpx2-4";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ s2mps11_irq: s2mps11-irq-pins {
+ samsung,pins = "gpx3-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "peripheral";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+ vdd33-supply = <&ldo9_reg>;
+ vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+ vdd33-supply = <&ldo9_reg>;
+ vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-klimt-wifi.dts b/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
new file mode 100644
index 000000000000..011787b1bbf0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5420 Klimt WiFi board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420-galaxy-tab-common.dtsi"
+
+/ {
+ model = "Samsung Klimt WiFi based on Exynos5420";
+ compatible = "samsung,klimt-wifi", "samsung,exynos5420", \
+ "samsung,exynos5";
+};
+
+&ldo15_reg {
+ /* Unused */
+ regulator-name = "VDD_LDO15";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
+
+&ldo17_reg {
+ regulator-name = "VDD_VCI_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+};
+
+&ldo28_reg {
+ regulator-name = "VDD3_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+};
+
+&ldo29_reg {
+ regulator-name = "VDDR_1V6";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1600000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+};
+
+&ldo31_reg {
+ /* Unused */
+ regulator-name = "VDD_LDO31";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&ldo32_reg {
+ regulator-name = "VDD_TSP_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+};
+
+&mmc_2 {
+ sd-uhs-sdr104;
+};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index e76fb104db19..d6434ec86022 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -212,7 +212,7 @@
interrupts = <1 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
- <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+ <&pmic_dvs_1>, <&pmic_dvs_2>;
wakeup-source;
reg = <0x9>;
#clock-cells = <1>;
@@ -774,14 +774,14 @@
pinctrl-names = "default";
pinctrl-0 = <&mask_tpm_reset>;
- wifi_en: wifi-en {
+ wifi_en: wifi-en-pins {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- max98090_irq: max98090-irq {
+ max98090_irq: max98090-irq-pins {
samsung,pins = "gpx0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -789,7 +789,7 @@
};
/* We need GPX0_6 to be low at sleep time; just keep it low always */
- mask_tpm_reset: mask-tpm-reset {
+ mask_tpm_reset: mask-tpm-reset-pins {
samsung,pins = "gpx0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -797,70 +797,70 @@
samsung,pin-val = <0>;
};
- tpm_irq: tpm-irq {
+ tpm_irq: tpm-irq-pins {
samsung,pins = "gpx1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- trackpad_irq: trackpad-irq {
+ trackpad_irq: trackpad-irq-pins {
samsung,pins = "gpx1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- power_key_irq: power-key-irq {
+ power_key_irq: power-key-irq-pins {
samsung,pins = "gpx1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- ec_irq: ec-irq {
+ ec_irq: ec-irq-pins {
samsung,pins = "gpx1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- tps65090_irq: tps65090-irq {
+ tps65090_irq: tps65090-irq-pins {
samsung,pins = "gpx2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- dp_hpd_gpio: dp_hpd_gpio {
+ dp_hpd_gpio: dp-hpd-gpio-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- max77802_irq: max77802-irq {
+ max77802_irq: max77802-irq-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- lid_irq: lid-irq {
+ lid_irq: lid-irq-pins {
samsung,pins = "gpx3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pmic_dvs_1: pmic-dvs-1 {
+ pmic_dvs_1: pmic-dvs-1-pins {
samsung,pins = "gpy7-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -868,74 +868,67 @@
};
};
-&pinctrl_1 {
- /* Adjust WiFi drive strengths lower for EMI */
- sd1_clk: sd1-clk {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_cmd: sd1-cmd {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_bus4 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus1: sd1-bus-width1 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_bus8 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus4: sd1-bus-width4 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_clk {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus8: sd1-bus-width8 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_cmd {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
&pinctrl_2 {
- pmic_dvs_2: pmic-dvs-2 {
- samsung,pins = "gpj4-2";
+ pmic_dvs_2: pmic-dvs-2-pins {
+ samsung,pins = "gpj4-2", "gpj4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
+};
- pmic_dvs_3: pmic-dvs-3 {
- samsung,pins = "gpj4-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
&pinctrl_3 {
- /* Drive SPI lines at x2 for better integrity */
- spi2-bus {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
/* Drive SPI chip select at x2 for better integrity */
- ec_spi_cs: ec-spi-cs {
+ ec_spi_cs: ec-spi-cs-pins {
samsung,pins = "gpb1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
- usb300_vbus_en: usb300-vbus-en {
+ usb300_vbus_en: usb300-vbus-en-pins {
samsung,pins = "gph0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- usb301_vbus_en: usb301-vbus-en {
+ usb301_vbus_en: usb301-vbus-en-pins {
samsung,pins = "gph0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pmic_selb: pmic-selb {
+ pmic_selb: pmic-selb-pins {
samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
"gph0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -1090,6 +1083,16 @@
vtmu-supply = <&ldo10_reg>;
};
+&usbdrd3_0 {
+ vdd10-supply = <&ldo15_reg>;
+ vdd33-supply = <&ldo12_reg>;
+};
+
+&usbdrd3_1 {
+ vdd10-supply = <&ldo15_reg>;
+ vdd33-supply = <&ldo12_reg>;
+};
+
&usbdrd_dwc3_0 {
dr_mode = "host";
};
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index b82af7c89654..546ba274f4e5 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
- gpy7: gpy7 {
+ gpy7: gpy7-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -20,7 +20,7 @@
#interrupt-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -31,7 +31,7 @@
<26 0>, <26 1>, <27 0>, <27 1>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -42,7 +42,7 @@
<30 0>, <30 1>, <31 0>, <31 1>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -50,7 +50,7 @@
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -58,14 +58,14 @@
#interrupt-cells = <2>;
};
- dp_hpd: dp_hpd {
+ dp_hpd: dp-hpd-pins {
samsung,pins = "gpx0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- hdmi_cec: hdmi-cec {
+ hdmi_cec: hdmi-cec-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -74,7 +74,7 @@
};
&pinctrl_1 {
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -82,7 +82,7 @@
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -90,7 +90,7 @@
#interrupt-cells = <2>;
};
- gpc2: gpc2 {
+ gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -98,7 +98,7 @@
#interrupt-cells = <2>;
};
- gpc3: gpc3 {
+ gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -106,7 +106,7 @@
#interrupt-cells = <2>;
};
- gpc4: gpc4 {
+ gpc4: gpc4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -114,7 +114,7 @@
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -122,175 +122,175 @@
#interrupt-cells = <2>;
};
- gpy0: gpy0 {
+ gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy1: gpy1 {
+ gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy2: gpy2 {
+ gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy3: gpy3 {
+ gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy4: gpy4 {
+ gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy5: gpy5 {
+ gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy6: gpy6 {
+ gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpc0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpc0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpc0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_rclk: sd0-rclk {
+ sd0_rclk: sd0-rclk-pins {
samsung,pins = "gpc0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpc1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpc1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd1_int: sd1-int {
+ sd1_int: sd1-int-pins {
samsung,pins = "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpc1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd1_bus8: sd1-bus-width8 {
+ sd1_bus8: sd1-bus-width8-pins {
samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpc2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_wp: sd2-wp {
+ sd2_wp: sd2-wp-pins {
samsung,pins = "gpc4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -299,7 +299,7 @@
};
&pinctrl_2 {
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -307,7 +307,7 @@
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -315,7 +315,7 @@
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -323,7 +323,7 @@
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -331,7 +331,7 @@
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -339,7 +339,7 @@
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -347,7 +347,7 @@
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -355,7 +355,7 @@
#interrupt-cells = <2>;
};
- gpj4: gpj4 {
+ gpj4: gpj4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -363,7 +363,7 @@
#interrupt-cells = <2>;
};
- cam_gpio_a: cam-gpio-a {
+ cam_gpio_a: cam-gpio-a-pins {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1";
@@ -372,7 +372,7 @@
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_gpio_b: cam-gpio-b {
+ cam_gpio_b: cam-gpio-b-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -380,42 +380,42 @@
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_i2c2_bus: cam-i2c2-bus {
+ cam_i2c2_bus: cam-i2c2-bus-pins {
samsung,pins = "gpf0-4", "gpf0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_spi1_bus: cam-spi1-bus {
+ cam_spi1_bus: cam-spi1-bus-pins {
samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_i2c1_bus: cam-i2c1-bus {
+ cam_i2c1_bus: cam-i2c1-bus-pins {
samsung,pins = "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_i2c0_bus: cam-i2c0-bus {
+ cam_i2c0_bus: cam-i2c0-bus-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_spi0_bus: cam-spi0-bus {
+ cam_spi0_bus: cam-spi0-bus-pins {
samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_bayrgb_bus: cam-bayrgb-bus {
+ cam_bayrgb_bus: cam-bayrgb-bus-pins {
samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
"gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
"gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
@@ -428,7 +428,7 @@
};
&pinctrl_3 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -436,7 +436,7 @@
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -444,7 +444,7 @@
#interrupt-cells = <2>;
};
- gpa2: gpa2 {
+ gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -452,7 +452,7 @@
#interrupt-cells = <2>;
};
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -460,7 +460,7 @@
#interrupt-cells = <2>;
};
- gpb1: gpb1 {
+ gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -468,7 +468,7 @@
#interrupt-cells = <2>;
};
- gpb2: gpb2 {
+ gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -476,7 +476,7 @@
#interrupt-cells = <2>;
};
- gpb3: gpb3 {
+ gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -484,7 +484,7 @@
#interrupt-cells = <2>;
};
- gpb4: gpb4 {
+ gpb4: gpb4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -492,7 +492,7 @@
#interrupt-cells = <2>;
};
- gph0: gph0 {
+ gph0: gph0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -500,98 +500,98 @@
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c3_bus: i2c3-bus {
+ i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c4_hs_bus: i2c4-hs-bus {
+ i2c4_hs_bus: i2c4-hs-bus-pins {
samsung,pins = "gpa2-0", "gpa2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c5_hs_bus: i2c5-hs-bus {
+ i2c5_hs_bus: i2c5-hs-bus-pins {
samsung,pins = "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -599,7 +599,7 @@
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -607,7 +607,7 @@
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
"gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -615,7 +615,7 @@
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pcm2_bus: pcm2-bus {
+ pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
"gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -623,91 +623,91 @@
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- spdif_bus: spdif-bus {
+ spdif_bus: spdif-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c6_hs_bus: i2c6-hs-bus {
+ i2c6_hs_bus: i2c6-hs-bus-pins {
samsung,pins = "gpb1-3", "gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpb2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpb2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpb2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c7_hs_bus: i2c7-hs-bus {
+ i2c7_hs_bus: i2c7-hs-bus-pins {
samsung,pins = "gpb2-2", "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c8_hs_bus: i2c8-hs-bus {
+ i2c8_hs_bus: i2c8-hs-bus-pins {
samsung,pins = "gpb3-4", "gpb3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c9_hs_bus: i2c9-hs-bus {
+ i2c9_hs_bus: i2c9-hs-bus-pins {
samsung,pins = "gpb3-6", "gpb3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c10_hs_bus: i2c10-hs-bus {
+ i2c10_hs_bus: i2c10-hs-bus-pins {
samsung,pins = "gpb4-0", "gpb4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -716,7 +716,7 @@
};
&pinctrl_4 {
- gpz: gpz {
+ gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -724,7 +724,7 @@
#interrupt-cells = <2>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index a4f0e3ffedbd..4d7b6d9008a7 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -124,6 +124,9 @@
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
+ vdd-supply = <&ldo6_reg>;
+ vdd_osc-supply = <&ldo7_reg>;
+ vdd_pll-supply = <&ldo6_reg>;
};
&hsi2c_4 {
@@ -377,7 +380,7 @@
};
&pinctrl_0 {
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -386,14 +389,14 @@
};
&pinctrl_2 {
- usb300_vbus_en: usb300-vbus-en {
+ usb300_vbus_en: usb300-vbus-en-pins {
samsung,pins = "gpg0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- usb301_vbus_en: usb301-vbus-en {
+ usb301_vbus_en: usb301-vbus-en-pins {
samsung,pins = "gpg1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -407,6 +410,16 @@
clock-names = "rtc", "rtc_src";
};
+&usbdrd3_0 {
+ vdd10-supply = <&ldo11_reg>;
+ vdd33-supply = <&ldo9_reg>;
+};
+
+&usbdrd3_1 {
+ vdd10-supply = <&ldo11_reg>;
+ vdd33-supply = <&ldo9_reg>;
+};
+
&usbdrd_phy0 {
vbus-supply = <&usb300_vbus_reg>;
};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index e23e8ffb093f..21b608705049 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -302,8 +302,8 @@
clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
clock-names = "ppmu";
events {
- ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 {
- event-name = "ppmu-event3-dmc0_0";
+ ppmu_event3_dmc0_0: ppmu-event3-dmc0-0 {
+ event-name = "ppmu-event3-dmc0-0";
};
};
};
@@ -314,8 +314,8 @@
clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
clock-names = "ppmu";
events {
- ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 {
- event-name = "ppmu-event3-dmc0_1";
+ ppmu_event3_dmc0_1: ppmu-event3-dmc0-1 {
+ event-name = "ppmu-event3-dmc0-1";
};
};
};
@@ -326,8 +326,8 @@
clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
clock-names = "ppmu";
events {
- ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 {
- event-name = "ppmu-event3-dmc1_0";
+ ppmu_event3_dmc1_0: ppmu-event3-dmc1-0 {
+ event-name = "ppmu-event3-dmc1-0";
};
};
};
@@ -338,8 +338,8 @@
clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
clock-names = "ppmu";
events {
- ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 {
- event-name = "ppmu-event3-dmc1_1";
+ ppmu_event3_dmc1_1: ppmu-event3-dmc1-1 {
+ event-name = "ppmu-event3-dmc1-1";
};
};
};
@@ -430,7 +430,7 @@
power-domains = <&mau_pd>;
};
- adma: adma@3880000 {
+ adma: dma-controller@3880000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x03880000 0x1000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -442,7 +442,7 @@
power-domains = <&mau_pd>;
};
- pdma0: pdma@121a0000 {
+ pdma0: dma-controller@121a0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
@@ -453,7 +453,7 @@
#dma-requests = <32>;
};
- pdma1: pdma@121b0000 {
+ pdma1: dma-controller@121b0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
@@ -464,7 +464,7 @@
#dma-requests = <32>;
};
- mdma0: mdma@10800000 {
+ mdma0: dma-controller@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
@@ -475,7 +475,7 @@
#dma-requests = <1>;
};
- mdma1: mdma@11c10000 {
+ mdma1: dma-controller@11c10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index e7958dbecfd2..2f65dcf6ba73 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -358,7 +358,7 @@
tCKESR-min-tck = <2>;
tMRD-min-tck = <5>;
- timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
+ timings_samsung_K3QF2F20DB_800mhz: timings@800000000 {
compatible = "jedec,lpddr3-timings";
/* workaround: 'reg' shows max-freq */
reg = <800000000>;
@@ -999,7 +999,7 @@
};
&pinctrl_0 {
- s2mps11_irq: s2mps11-irq {
+ s2mps11_irq: s2mps11-irq-pins {
samsung,pins = "gpx0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index e35af40a55cb..a6961ff24030 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -480,14 +480,14 @@
};
&pinctrl_0 {
- power_key: power-key {
+ power_key: power-key-pins {
samsung,pins = "gpx0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -496,7 +496,7 @@
};
&pinctrl_1 {
- emmc_nrst_pin: emmc-nrst {
+ emmc_nrst_pin: emmc-nrst-pins {
samsung,pins = "gpd1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 77013ee586f8..4ee76281979c 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -221,7 +221,7 @@
interrupts = <1 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
- <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+ <&pmic_dvs_1>, <&pmic_dvs_2>;
wakeup-source;
reg = <0x9>;
#clock-cells = <1>;
@@ -756,14 +756,14 @@
pinctrl-names = "default";
pinctrl-0 = <&mask_tpm_reset>;
- wifi_en: wifi-en {
+ wifi_en: wifi-en-pins {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- max98091_irq: max98091-irq {
+ max98091_irq: max98091-irq-pins {
samsung,pins = "gpx0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -771,7 +771,7 @@
};
/* We need GPX0_6 to be low at sleep time; just keep it low always */
- mask_tpm_reset: mask-tpm-reset {
+ mask_tpm_reset: mask-tpm-reset-pins {
samsung,pins = "gpx0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -779,70 +779,70 @@
samsung,pin-val = <0>;
};
- tpm_irq: tpm-irq {
+ tpm_irq: tpm-irq-pins {
samsung,pins = "gpx1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- trackpad_irq: trackpad-irq {
+ trackpad_irq: trackpad-irq-pins {
samsung,pins = "gpx1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- power_key_irq: power-key-irq {
+ power_key_irq: power-key-irq-pins {
samsung,pins = "gpx1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- ec_irq: ec-irq {
+ ec_irq: ec-irq-pins {
samsung,pins = "gpx1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- tps65090_irq: tps65090-irq {
+ tps65090_irq: tps65090-irq-pins {
samsung,pins = "gpx2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- dp_hpd_gpio: dp_hpd_gpio {
+ dp_hpd_gpio: dp-hpd-gpio-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- max77802_irq: max77802-irq {
+ max77802_irq: max77802-irq-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- lid_irq: lid-irq {
+ lid_irq: lid-irq-pins {
samsung,pins = "gpx3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pmic_dvs_1: pmic-dvs-1 {
+ pmic_dvs_1: pmic-dvs-1-pins {
samsung,pins = "gpy7-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -850,74 +850,67 @@
};
};
-&pinctrl_1 {
- /* Adjust WiFi drive strengths lower for EMI */
- sd1_clk: sd1-clk {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_cmd: sd1-cmd {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_bus4 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus1: sd1-bus-width1 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_bus8 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus4: sd1-bus-width4 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_clk {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus8: sd1-bus-width8 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_cmd {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
&pinctrl_2 {
- pmic_dvs_2: pmic-dvs-2 {
- samsung,pins = "gpj4-2";
+ pmic_dvs_2: pmic-dvs-2-pins {
+ samsung,pins = "gpj4-2", "gpj4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
+};
- pmic_dvs_3: pmic-dvs-3 {
- samsung,pins = "gpj4-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
&pinctrl_3 {
- /* Drive SPI lines at x2 for better integrity */
- spi2-bus {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
/* Drive SPI chip select at x2 for better integrity */
- ec_spi_cs: ec-spi-cs {
+ ec_spi_cs: ec-spi-cs-pins {
samsung,pins = "gpb1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
- usb300_vbus_en: usb300-vbus-en {
+ usb300_vbus_en: usb300-vbus-en-pins {
samsung,pins = "gph0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- usb301_vbus_en: usb301-vbus-en {
+ usb301_vbus_en: usb301-vbus-en-pins {
samsung,pins = "gph0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pmic_selb: pmic-selb {
+ pmic_selb: pmic-selb-pins {
samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
"gph0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -1072,6 +1065,16 @@
vtmu-supply = <&ldo10_reg>;
};
+&usbdrd3_0 {
+ vdd10-supply = <&ldo15_reg>;
+ vdd33-supply = <&ldo12_reg>;
+};
+
+&usbdrd3_1 {
+ vdd10-supply = <&ldo15_reg>;
+ vdd33-supply = <&ldo12_reg>;
+};
+
&usbdrd_dwc3_0 {
dr_mode = "host";
};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 9e5651c7ea6b..6d7b044fec5b 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -338,7 +338,7 @@
};
ds1339: rtc@68 {
- compatible = "mxim,ds1339";
+ compatible = "dallas,ds1339";
reg = <0x68>;
trickle-resistor-ohms = <250>;
trickle-diode-disable;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 84d0176d5193..130b4145af82 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -110,6 +110,8 @@
interrupt-names = "bch";
clocks = <&clks 50>;
clock-names = "gpmi_io";
+ assigned-clocks = <&clks 13>;
+ assigned-clock-parents = <&clks 10>;
dmas = <&dma_apbh 4>;
dma-names = "rx-tx";
status = "disabled";
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index 6ecb83e7f336..85654d6baf28 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -102,7 +102,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- rtc: m41t00@68 {
+ rtc: rtc@68 {
compatible = "st,m41t00";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 4f88e96d81dd..d5c68d1ea707 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -53,6 +53,31 @@
};
};
+ lvds-decoder {
+ compatible = "ti,ds90cf364a", "lvds-decoder";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_decoder_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds_decoder_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+
panel {
compatible = "edt,etm0700g0dh6";
pinctrl-0 = <&pinctrl_display_gpio>;
@@ -61,7 +86,7 @@
port {
panel_in: endpoint {
- remote-endpoint = <&lvds0_out>;
+ remote-endpoint = <&lvds_decoder_out>;
};
};
};
@@ -450,7 +475,7 @@
reg = <2>;
lvds0_out: endpoint {
- remote-endpoint = <&panel_in>;
+ remote-endpoint = <&lvds_decoder_in>;
};
};
};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 81c2726a328a..8712e9851465 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -241,7 +241,7 @@
clock-frequency = <400000>;
status = "okay";
- rtc1: ds1339@68 {
+ rtc1: rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
index 60fe5f14666e..c4ce23d8ac9f 100644
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
@@ -50,6 +50,11 @@
};
};
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&vdiv_vaccu>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -101,6 +106,64 @@
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
+
+ thermal-zones {
+ chassis-thermal {
+ polling-delay = <20000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&tsens0>;
+ };
+
+ touch-thermal0 {
+ polling-delay = <20000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&touch_temp0>;
+ };
+
+ touch-thermal1 {
+ polling-delay = <20000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&touch_temp1>;
+ };
+ };
+
+ touchscreen {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+ <&adc_ts 5>;
+ io-channel-names = "y", "z1", "z2", "x";
+ touchscreen-min-pressure = <64687>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ touchscreen-x-plate-ohms = <300>;
+ touchscreen-y-plate-ohms = <800>;
+ };
+
+ touch_temp0: touch-temperature-sensor0 {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&adc_ts 0>;
+ io-channel-names = "sensor-channel";
+ temperature-lookup-table = < (-40000) 736
+ 85000 474>;
+ };
+
+ touch_temp1: touch-temperature-sensor1 {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&adc_ts 7>;
+ io-channel-names = "sensor-channel";
+ temperature-lookup-table = < (-40000) 826
+ 85000 609>;
+ };
+
+ vdiv_vaccu: voltage-divider-vaccu {
+ compatible = "voltage-divider";
+ io-channels = <&adc_ts 2>;
+ output-ohms = <2500>;
+ full-ohms = <64000>;
+ #io-channel-cells = <0>;
+ };
};
&can1 {
@@ -129,26 +192,61 @@
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
- touchscreen@0 {
- compatible = "ti,tsc2046";
+ adc_ts: adc@0 {
+ compatible = "ti,tsc2046e-adc";
reg = <0>;
pinctrl-0 = <&pinctrl_tsc2046>;
pinctrl-names ="default";
- spi-max-frequency = <100000>;
- interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
- pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <1000000>;
+ interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+ #io-channel-cells = <1>;
- touchscreen-inverted-x;
- touchscreen-inverted-y;
- touchscreen-max-pressure = <4095>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ settling-time-us = <300>;
+ oversampling-ratio = <5>;
+ };
- ti,vref-delay-usecs = /bits/ 16 <100>;
- ti,x-plate-ohms = /bits/ 16 <800>;
- ti,y-plate-ohms = /bits/ 16 <300>;
- ti,debounce-max = /bits/ 16 <3>;
- ti,debounce-tol = /bits/ 16 <70>;
- ti,debounce-rep = /bits/ 16 <3>;
- wakeup-source;
+ channel@1 {
+ reg = <1>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@2 {
+ reg = <2>;
+ settling-time-us = <300>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@4 {
+ reg = <4>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ /* channel 6 is not connected */
+
+ channel@7 {
+ reg = <7>;
+ settling-time-us = <300>;
+ oversampling-ratio = <5>;
+ };
};
};
@@ -233,9 +331,10 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- temperature-sensor@70 {
+ tsens0: temperature-sensor@70 {
compatible = "ti,tmp103";
reg = <0x70>;
+ #thermal-sensor-cells = <0>;
};
};
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index 190d26642bc8..b86deebef7b7 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/display/sdtv-standards.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
@@ -28,6 +29,35 @@
power-supply = <&reg_bl_12v0>;
};
+ display {
+ compatible = "fsl,imx-parallel-display";
+ pinctrl-0 = <&pinctrl_ipu1_disp>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&vdiv_vaccu>;
+ };
+
keys {
compatible = "gpio-keys";
autorepeat;
@@ -135,6 +165,30 @@
};
};
+ panel {
+ compatible = "innolux,g070y2-t02";
+ backlight = <&backlight_lcd>;
+ power-supply = <&reg_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
+ connector {
+ compatible = "composite-video-connector";
+ label = "Composite0";
+ sdtv-standards = <SDTV_STD_PAL_B>;
+
+ port {
+ comp0_out: endpoint {
+ remote-endpoint = <&tvp5150_comp0_in>;
+ };
+ };
+ };
+
reg_bl_12v0: regulator-bl-12v0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -146,6 +200,13 @@
enable-active-high;
};
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_1v8: regulator-1v8 {
compatible = "regulator-fixed";
regulator-name = "1v8";
@@ -179,6 +240,64 @@
frame-master;
};
};
+
+ thermal-zones {
+ chassis-thermal {
+ polling-delay = <20000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&tsens0>;
+ };
+
+ touch-thermal0 {
+ polling-delay = <20000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&touch_temp0>;
+ };
+
+ touch-thermal1 {
+ polling-delay = <20000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&touch_temp1>;
+ };
+ };
+
+ touchscreen {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+ <&adc_ts 5>;
+ io-channel-names = "y", "z1", "z2", "x";
+ touchscreen-min-pressure = <64687>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ touchscreen-x-plate-ohms = <300>;
+ touchscreen-y-plate-ohms = <800>;
+ };
+
+ touch_temp0: touch-temperature-sensor0 {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&adc_ts 0>;
+ io-channel-names = "sensor-channel";
+ temperature-lookup-table = < (-40000) 736
+ 85000 474>;
+ };
+
+ touch_temp1: touch-temperature-sensor1 {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&adc_ts 7>;
+ io-channel-names = "sensor-channel";
+ temperature-lookup-table = < (-40000) 826
+ 85000 609>;
+ };
+
+ vdiv_vaccu: voltage-divider-vaccu {
+ compatible = "voltage-divider";
+ io-channels = <&adc_ts 2>;
+ output-ohms = <2500>;
+ full-ohms = <64000>;
+ #io-channel-cells = <0>;
+ };
};
&audmux {
@@ -221,22 +340,41 @@
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
- touchscreen@0 {
- compatible = "ti,tsc2046";
+ adc_ts: adc@0 {
+ compatible = "ti,tsc2046e-adc";
reg = <0>;
pinctrl-0 = <&pinctrl_tsc>;
pinctrl-names ="default";
- spi-max-frequency = <100000>;
- interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
- pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
- touchscreen-max-pressure = <4095>;
- ti,vref-delay-usecs = /bits/ 16 <100>;
- ti,x-plate-ohms = /bits/ 16 <800>;
- ti,y-plate-ohms = /bits/ 16 <300>;
- ti,debounce-max = /bits/ 16 <3>;
- ti,debounce-tol = /bits/ 16 <70>;
- ti,debounce-rep = /bits/ 16 <3>;
- wakeup-source;
+ spi-max-frequency = <1000000>;
+ interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+ #io-channel-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@1 {
+ reg = <1>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@4 {
+ reg = <4>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
};
};
@@ -252,6 +390,31 @@
VDDIO-supply = <&reg_3v3>;
VDDD-supply = <&reg_1v8>;
};
+
+ video@5c {
+ compatible = "ti,tvp5150";
+ reg = <0x5c>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tvp5150_comp0_in: endpoint {
+ remote-endpoint = <&comp0_out>;
+ };
+ };
+
+ /* Output port 2 is video output pad */
+ port@2 {
+ reg = <2>;
+
+ tvp5151_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+ };
+ };
+ };
};
&i2c3 {
@@ -260,6 +423,12 @@
reg = <0x51>;
};
+ tsens0: temperature-sensor@70 {
+ compatible = "ti,tmp103";
+ reg = <0x70>;
+ #thermal-sensor-cells = <0>;
+ };
+
gpio_pca: gpio@74 {
compatible = "nxp,pca9539";
reg = <0x74>;
@@ -275,6 +444,14 @@
status = "okay";
};
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display_in>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+ remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
index d37ba4ed847d..227c952543d4 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -66,6 +66,11 @@
};
};
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -181,6 +186,72 @@
frame-master;
};
};
+
+ thermal-zones {
+ chassis-thermal {
+ polling-delay = <20000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&tsens0>;
+ };
+
+ touch-thermal0 {
+ polling-delay = <20000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&touch_temp0>;
+ };
+
+ touch-thermal1 {
+ polling-delay = <20000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&touch_temp1>;
+ };
+ };
+
+ touchscreen {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+ <&adc_ts 5>;
+ io-channel-names = "y", "z1", "z2", "x";
+ touchscreen-min-pressure = <64687>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ touchscreen-x-plate-ohms = <300>;
+ touchscreen-y-plate-ohms = <800>;
+ };
+
+ touch_temp0: touch-temperature-sensor0 {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&adc_ts 0>;
+ io-channel-names = "sensor-channel";
+ temperature-lookup-table = < (-40000) 736
+ 85000 474>;
+ };
+
+ touch_temp1: touch-temperature-sensor1 {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&adc_ts 7>;
+ io-channel-names = "sensor-channel";
+ temperature-lookup-table = < (-40000) 826
+ 85000 609>;
+ };
+
+ vdiv_vaccu: voltage-divider-vaccu {
+ compatible = "voltage-divider";
+ io-channels = <&adc_ts 2>;
+ output-ohms = <2500>;
+ full-ohms = <64000>;
+ #io-channel-cells = <0>;
+ };
+
+ vdiv_hitch_pos: voltage-divider-hitch-pos {
+ compatible = "voltage-divider";
+ io-channels = <&adc_ts 6>;
+ output-ohms = <3300>;
+ full-ohms = <13300>;
+ #io-channel-cells = <0>;
+ };
};
&audmux {
@@ -244,22 +315,41 @@
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
- touchscreen@0 {
- compatible = "ti,tsc2046";
+ adc_ts: adc@0 {
+ compatible = "ti,tsc2046e-adc";
reg = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&pinctrl_touchscreen>;
- spi-max-frequency = <200000>;
- interrupts-extended = <&gpio5 8 IRQ_TYPE_EDGE_FALLING>;
- pendown-gpio = <&gpio5 8 GPIO_ACTIVE_LOW>;
- touchscreen-size-x = <800>;
- touchscreen-size-y = <480>;
- touchscreen-inverted-y;
- touchscreen-max-pressure = <4095>;
- ti,vref-delay-usecs = /bits/ 16 <100>;
- ti,x-plate-ohms = /bits/ 16 <800>;
- ti,y-plate-ohms = /bits/ 16 <300>;
- wakeup-source;
+ pinctrl-names ="default";
+ spi-max-frequency = <1000000>;
+ interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+ #io-channel-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@1 {
+ reg = <1>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@4 {
+ reg = <4>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
+ };
};
};
@@ -446,9 +536,10 @@
reg = <0x51>;
};
- temperature-sensor@70 {
+ tsens0: temperature-sensor@70 {
compatible = "ti,tmp103";
reg = <0x70>;
+ #thermal-sensor-cells = <0>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 343364d3e4f7..8daef65d5bb3 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -159,7 +159,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- rtc: ds1307@68 {
+ rtc: rtc@68 {
compatible = "dallas,ds1307";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
index dc89b554e694..fe72650295a5 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
@@ -4,7 +4,10 @@
* Copyright (C) 2018 Marek Vasut <marex@denx.de>
*/
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
chosen {
diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
index daf76345b179..f4dca20669d6 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
@@ -17,6 +17,7 @@
mmc1 = &usdhc2;
/delete-property/ mmc2;
/delete-property/ mmc3;
+ rtc0 = &rtc0;
};
chosen {
@@ -39,18 +40,21 @@
label = "s6";
linux,code = <KEY_F6>;
gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ wakeup-source;
};
button2 {
label = "s7";
linux,code = <KEY_F7>;
gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ wakeup-source;
};
button3 {
label = "s8";
linux,code = <KEY_F8>;
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ wakeup-source;
};
};
@@ -82,6 +86,8 @@
reg_pcie: regulator-pcie {
compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_regpcie>;
regulator-name = "supply-pcie";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -392,7 +398,6 @@
pinctrl_hog: hoggrp {
fsl,pins = <
- /* LCD.CONTRAST -> Rev 0100 only, not used on Rev.0200*/
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
@@ -433,8 +438,6 @@
MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
- /* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
- MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
>;
};
@@ -459,6 +462,13 @@
>;
};
+ pinctrl_regpcie: regpciegrp {
+ fsl,pins = <
+ /* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
diff --git a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
index a61f2705a340..df8fa169e9f6 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
@@ -6,12 +6,6 @@
* Author: Markus Niebel <Markus.Niebel@tq-group.com>
*/
-/ {
- aliases {
- rtc0 = &rtc0;
- };
-};
-
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
diff --git a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
index 9f9f7037c9e4..7d1cd7454c7f 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
@@ -6,12 +6,6 @@
* Author: Markus Niebel <Markus.Niebel@tq-group.com>
*/
-/ {
- aliases {
- rtc0 = &rtc0;
- };
-};
-
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
@@ -19,8 +13,11 @@
&i2c1 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_recovery>;
+ scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index f3236204cb5a..1f2ba6f6254e 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -205,6 +205,19 @@
regulator-always-on;
};
};
+
+ da9063_rtc: rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ da9063_wdog: watchdog {
+ compatible = "dlg,da9063-watchdog";
+ };
+
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 94b254bfd054..28a805384668 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -116,6 +116,16 @@
dlg,use-sw-pm;
};
+ thermal {
+ compatible = "dlg,da9062-thermal";
+ status = "disabled";
+ };
+
+ gpio {
+ compatible = "dlg,da9062-gpio";
+ status = "disabled";
+ };
+
regulators {
vdd_arm: buck1 {
regulator-name = "vdd_arm";
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
index 51a3a5392c95..344ea935c7da 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
@@ -52,6 +52,13 @@
>;
};
+ pinctrl_i2c1_recovery: i2c1recoverygrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b899
+ MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b899
+ >;
+ };
+
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
@@ -59,6 +66,13 @@
>;
};
+ pinctrl_i2c3_recovery: i2c3recoverygrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
+ >;
+ };
+
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
index bfb67da64b96..7dc3f0005b0f 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
@@ -4,6 +4,8 @@
* Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
*/
+#include <dt-bindings/gpio/gpio.h>
+
&fec {
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
@@ -11,8 +13,11 @@
};
&i2c1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_recovery>;
+ scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
index 49c472285c06..dd0925766440 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
@@ -4,9 +4,14 @@
* Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
*/
+#include <dt-bindings/gpio/gpio.h>
+
&i2c3 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_recovery>;
+ scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
index 410972e1dca9..99ec7a838f8d 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
@@ -85,7 +85,7 @@
};
&i2c3 {
- rtc: mcp7940x@6f {
+ rtc: rtc@6f {
compatible = "microchip,mcp7940x";
reg = <0x6f>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index b9e305774fed..1ac7e13249d2 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -126,15 +126,6 @@
regulator-max-microvolt = <3300000>;
};
- reg_h1_vbus: regulator-h1-vbus {
- compatible = "regulator-fixed";
- regulator-name = "h1-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
reg_otg_vbus: regulator-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "otg-vbus";
@@ -212,6 +203,8 @@
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1>;
+ termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ termination-ohms = <150>;
status = "okay";
};
@@ -492,7 +485,6 @@
};
&usbh1 {
- vbus-supply = <&reg_h1_vbus>;
pinctrl-names = "default";
phy_type = "utmi";
dr_mode = "host";
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index 480e73183f6b..f69eec18d865 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -50,8 +50,12 @@
};
};
+&vgen3_reg {
+ regulator-always-on;
+};
+
&pcie {
- status = "disabled";
+ status = "okay";
};
&sata {
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index ee645655090d..35861bbea94e 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -183,6 +183,27 @@
status = "okay";
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ hdmi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ interrupts-extended = <&gpio3 27 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ port {
+ hdmi: endpoint {
+ remote-endpoint = <&lcdc>;
+ };
+ };
+ };
+ };
+};
+
&i2c4 { /* Onboard Motion sensors */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
@@ -190,6 +211,18 @@
status = "disabled";
};
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "okay";
+
+ port {
+ lcdc: endpoint {
+ remote-endpoint = <&hdmi>;
+ };
+ };
+};
+
&iomuxc {
pinctrl_bt_reg: btreggrp {
fsl,pins =
@@ -227,12 +260,53 @@
<MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins =
+ <MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1>,
+ <MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1>;
+ };
+
pinctrl_i2c4: i2c4grp {
fsl,pins =
<MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>,
<MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>;
};
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ >;
+ };
+
+
pinctrl_uart1: uart1grp {
fsl,pins =
<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1>,
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
index 97686097a86e..92ac0edcb608 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
@@ -119,7 +119,7 @@
/delete-node/ codec@a;
/delete-node/ touchscreen@48;
- rtc: mcp7940x@6f {
+ rtc: rtc@6f {
compatible = "microchip,mcp7940x";
reg = <0x6f>;
};
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
index 139188eb9f40..b770fc937970 100644
--- a/arch/arm/boot/dts/imx7-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -103,7 +103,7 @@
};
/* M41T0M6 real time clock on carrier board */
- rtc: m41t0m6@68 {
+ rtc: rtc@68 {
compatible = "st,m41t0";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 3caf450735d7..3b9df8c82ae3 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -129,7 +129,7 @@
};
/* M41T0M6 real time clock on carrier board */
- rtc: m41t0m6@68 {
+ rtc: rtc@68 {
compatible = "st,m41t0";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 62b771c1d5a9..f1c60b0cb143 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -40,7 +40,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&codec>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -293,7 +293,7 @@
compatible = "fsl,sgtl5000";
#sound-dai-cells = <0>;
reg = <0x0a>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1_mclk>;
VDDA-supply = <&reg_module_3v3_avdd>;
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
index 49086c6b6a0a..3df6dff7734a 100644
--- a/arch/arm/boot/dts/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -302,7 +302,7 @@
tlv320aic32x4: audio-codec@18 {
compatible = "ti,tlv320aic32x4";
reg = <0x18>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
clock-names = "mclk";
ldoin-supply = <&reg_audio_3v3>;
iov-supply = <&reg_audio_3v3>;
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index e0751e6ba3c0..a31de900139d 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -288,7 +288,7 @@
codec: wm8960@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
clock-names = "mclk";
wlf,shared-lrclk;
};
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index 7b2198a9372c..d917dc4f2f22 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&sgtl5000>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -41,7 +41,7 @@
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_vref_1v8>;
};
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts
index 70bea95c06d8..f263e391e24c 100644
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&sgtl5000>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -41,7 +41,7 @@
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_vref_1v8>;
};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 7813ef960f6e..f053f5122741 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -385,14 +385,14 @@
codec: wm8960@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
clock-names = "mclk";
wlf,shared-lrclk;
wlf,hp-cfg = <2 2 3>;
wlf,gpio-cfg = <1 3>;
assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
<&clks IMX7D_PLL_AUDIO_POST_DIV>,
- <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
assigned-clock-rates = <0>, <884736000>, <12288000>;
};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b7735979b7e4..f8cba47536a0 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -113,6 +113,49 @@
<0x31004000 0x2000>,
<0x31006000 0x2000>;
};
+
+ pcie: pcie@33800000 {
+ compatible = "fsl,imx7d-pcie";
+ reg = <0x33800000 0x4000>,
+ <0x4ff00000 0x80000>;
+ reg-names = "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000>, /* downstream I/O */
+ <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
+ num-lanes = <1>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ /*
+ * Reference manual lists pci irqs incorrectly
+ * Real hardware ordering is same as imx6: D+MSI, C, B, A
+ */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
+ <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
+ clock-names = "pcie", "pcie_bus", "pcie_phy";
+ assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
+ <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+
+ fsl,max-link-speed = <2>;
+ power-domains = <&pgc_pcie_phy>;
+ resets = <&src IMX7_RESET_PCIEPHY>,
+ <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
+ <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
+ reset-names = "pciephy", "apps", "turnoff";
+ fsl,imx7d-pcie-phy = <&pcie_phy>;
+ status = "disabled";
+ };
};
};
@@ -162,49 +205,6 @@
fsl,stop-mode = <&gpr 0x10 4>;
status = "disabled";
};
-
- pcie: pcie@33800000 {
- compatible = "fsl,imx7d-pcie";
- reg = <0x33800000 0x4000>,
- <0x4ff00000 0x80000>;
- reg-names = "dbi", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- bus-range = <0x00 0xff>;
- ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000>, /* downstream I/O */
- <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
- num-lanes = <1>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- /*
- * Reference manual lists pci irqs incorrectly
- * Real hardware ordering is same as imx6: D+MSI, C, B, A
- */
- interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
- <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
- <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
- clock-names = "pcie", "pcie_bus", "pcie_phy";
- assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
- <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
- assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
- <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-
- fsl,max-link-speed = <2>;
- power-domains = <&pgc_pcie_phy>;
- resets = <&src IMX7_RESET_PCIEPHY>,
- <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
- <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
- reset-names = "pciephy", "apps", "turnoff";
- fsl,imx7d-pcie-phy = <&pcie_phy>;
- status = "disabled";
- };
};
&ca_funnel_in_ports {
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index 4f1edef06c92..e8734d218b9d 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -75,7 +75,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&codec>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -232,7 +232,7 @@
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1_mclk>;
VDDA-supply = <&vgen4_reg>;
diff --git a/arch/arm/boot/dts/imxrt1050-pinfunc.h b/arch/arm/boot/dts/imxrt1050-pinfunc.h
new file mode 100644
index 000000000000..22c14a3262ad
--- /dev/null
+++ b/arch/arm/boot/dts/imxrt1050-pinfunc.h
@@ -0,0 +1,993 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
+#define _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
+
+#define IMX_PAD_SION 0x40000000
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 0x014 0x204 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A 0x014 0x204 0x494 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK 0x014 0x204 0x500 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2 0x014 0x204 0x60C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00 0x014 0x204 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00 0x014 0x204 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 0x018 0x208 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B 0x018 0x208 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0 0x018 0x208 0x4FC 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_01_XBAR_INOUT3 0x018 0x208 0x610 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXIO1_D01 0x018 0x208 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_GPIO4_IO01 0x018 0x208 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02 0x01C 0x20C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXPWM4_PWM1_A 0x01C 0x20C 0x498 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_LPSPI2_SDO 0x01C 0x20C 0x508 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_02_XBAR_INOUT4 0x01C 0x20C 0x614 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXIO1_D02 0x01C 0x20C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_GPIO4_IO02 0x01C 0x20C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03 0x020 0x210 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXPWM4_PWM1_B 0x020 0x210 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_LPSPI2_SDI 0x020 0x210 0x504 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_03_XBAR_INOUT5 0x020 0x210 0x618 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXIO1_D03 0x020 0x210 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_GPIO4_IO03 0x020 0x210 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04 0x024 0x214 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXPWM4_PWM2_A 0x024 0x214 0x49C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_SAI2_TX_DATA 0x024 0x214 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_XBAR_INOUT6 0x024 0x214 0x61C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXIO1_D04 0x024 0x214 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_GPIO4_IO04 0x024 0x214 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05 0x028 0x218 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXPWM4_PWM2_B 0x028 0x218 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_SAI2_TX_SYNC 0x028 0x218 0x5C4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_XBAR_INOUT7 0x028 0x218 0x620 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXIO1_D05 0x028 0x218 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_GPIO4_IO05 0x028 0x218 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06 0x02C 0x21C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXPWM2_PWM0_A 0x02C 0x21C 0x478 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_SAI2_TX_BCLK 0x02C 0x21C 0x5C0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_XBAR_INOUT8 0x02C 0x21C 0x624 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXIO1_D06 0x02C 0x21C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_GPIO4_IO06 0x02C 0x21C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07 0x030 0x220 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXPWM2_PWM0_B 0x030 0x220 0x488 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_SAI2_MCLK 0x030 0x220 0x5B0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_XBAR_INOUT9 0x030 0x220 0x628 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXIO1_D07 0x030 0x220 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_GPIO4_IO07 0x030 0x220 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00 0x034 0x224 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXPWM2_PWM1_A 0x034 0x224 0x47C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_SAI2_RX_DATA 0x034 0x224 0x5B8 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_XBAR_INOUT17 0x034 0x224 0x62C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXIO1_D08 0x034 0x224 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_GPIO4_IO08 0x034 0x224 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00 0x038 0x228 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXPWM2_PWM1_B 0x038 0x228 0x48C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_SAI2_RX_SYNC 0x038 0x228 0x5BC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXCAN2_TX 0x038 0x228 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXIO1_D09 0x038 0x228 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_GPIO4_IO09 0x038 0x228 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01 0x03C 0x22C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXPWM2_PWM2_A 0x03C 0x22C 0x480 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_SAI2_RX_BCLK 0x03C 0x22C 0x5B4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXCAN2_RX 0x03C 0x22C 0x450 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXIO1_D10 0x03C 0x22C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_GPIO4_IO10 0x03C 0x22C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02 0x040 0x230 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXPWM2_PWM2_B 0x040 0x230 0x490 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_LPI2C4_SDA 0x040 0x230 0x4E8 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_USDHC2_RESET_B 0x040 0x230 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXIO1_D11 0x040 0x230 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_GPIO4_IO11 0x040 0x230 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03 0x044 0x234 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_XBAR_INOUT24 0x044 0x234 0x640 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_LPI2C4_SCL 0x044 0x234 0x4E4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_USDHC2_WP 0x044 0x234 0x5D8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_FLEXPWM1_PWM3_A 0x044 0x234 0x454 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_12_GPIO4_IO12 0x044 0x234 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04 0x048 0x238 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_XBAR_INOUT25 0x048 0x238 0x650 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_13_LPUART3_TXD 0x048 0x238 0x53C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_MQS_RIGHT 0x048 0x238 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_FLEXPWM1_PWM3_B 0x048 0x238 0x464 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_13_GPIO4_IO13 0x048 0x238 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05 0x04C 0x23C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_XBAR_INOUT19 0x04C 0x23C 0x654 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_LPUART3_RXD 0x04C 0x23C 0x538 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_MQS_LEFT 0x04C 0x23C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_LPSPI2_PCS1 0x04C 0x23C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_GPIO4_IO14 0x04C 0x23C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06 0x050 0x240 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_XBAR_INOUT20 0x050 0x240 0x634 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_LPUART3_CTS_B 0x050 0x240 0x534 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_SPDIF_OUT 0x050 0x240 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_TMR3_TIMER0 0x050 0x240 0x57C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_GPIO4_IO15 0x050 0x240 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07 0x054 0x244 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_XBAR_INOUT21 0x054 0x244 0x658 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_LPUART3_RTS_B 0x054 0x244 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_SPDIF_IN 0x054 0x244 0x5C8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_16_TMR3_TIMER1 0x054 0x244 0x580 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_GPIO4_IO16 0x054 0x244 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08 0x058 0x248 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXPWM4_PWM3_A 0x058 0x248 0x4A0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_LPUART4_CTS_B 0x058 0x248 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXCAN1_TX 0x058 0x248 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_TMR3_TIMER2 0x058 0x248 0x584 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_GPIO4_IO17 0x058 0x248 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09 0x05C 0x24C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXPWM4_PWM3_B 0x05C 0x24C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_LPUART4_RTS_B 0x05C 0x24C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXCAN1_RX 0x05C 0x24C 0x44C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_18_TMR3_TIMER3 0x05C 0x24C 0x588 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_GPIO4_IO18 0x05C 0x24C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_SNVS_VIO_5_CTL 0x05C 0x24C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11 0x060 0x250 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_FLEXPWM2_PWM3_A 0x060 0x250 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_LPUART4_TXD 0x060 0x250 0x544 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_19_ENET_RX_DATA01 0x060 0x250 0x438 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_TMR2_TIMER0 0x060 0x250 0x56C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_GPIO4_IO19 0x060 0x250 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_SNVS_VIO_5 0x060 0x250 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12 0x064 0x254 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_FLEXPWM2_PWM3_B 0x064 0x254 0x484 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_20_LPUART4_RXD 0x064 0x254 0x540 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_20_ENET_RX_DATA00 0x064 0x254 0x434 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_TMR2_TIMER0 0x064 0x254 0x570 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_GPIO4_IO20 0x064 0x254 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0 0x068 0x258 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_FLEXPWM3_PWM3_A 0x068 0x258 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_LPI2C3_SDA 0x068 0x258 0x4E0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_ENET_TX_DATA01 0x068 0x258 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_TMR2_TIMER2 0x068 0x258 0x574 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_GPIO4_IO21 0x068 0x258 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1 0x06C 0x25C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_FLEXPWM3_PWM3_B 0x06C 0x25C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_LPI2C3_SCL 0x06C 0x25C 0x4DC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_ENET_TX_DATA00 0x06C 0x25C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_TMR2_TIMER3 0x06C 0x25C 0x578 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_GPIO4_IO22 0x06C 0x25C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10 0x070 0x260 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_FLEXPWM1_PWM0_A 0x070 0x260 0x458 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_LPUART5_TXD 0x070 0x260 0x54C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_ENET_RX_EN 0x070 0x260 0x43C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_GPT1_CAPTURE2 0x070 0x260 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_GPIO4_IO23 0x070 0x260 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS 0x074 0x264 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_FLEXPWM1_PWM0_B 0x074 0x264 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_LPUART5_RXD 0x074 0x264 0x548 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_ENET_TX_EN 0x074 0x264 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_GPT1_CAPTURE1 0x074 0x264 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_GPIO4_IO24 0x074 0x264 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS 0x078 0x268 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_FLEXPWM1_PWM1_A 0x078 0x268 0x45C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_LPUART6_TXD 0x078 0x268 0x554 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_TX_CLK 0x078 0x268 0x448 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_REF_CLK 0x078 0x268 0x42C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_GPIO4_IO25 0x078 0x268 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK 0x07C 0x26C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXPWM1_PWM1_B 0x07C 0x26C 0x46C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_LPUART6_RXD 0x07C 0x26C 0x550 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_ENET_RX_ER 0x07C 0x26C 0x440 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXIO1_D12 0x07C 0x26C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_GPIO4_IO26 0x07C 0x26C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE 0x080 0x270 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXPWM1_PWM2_A 0x080 0x270 0x460 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_LPUART5_RTS_B 0x080 0x270 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_LPSPI1_SCK 0x080 0x270 0x4F0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXIO1_D13 0x080 0x270 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_GPIO4_IO27 0x080 0x270 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE 0x084 0x274 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXPWM1_PWM2_B 0x084 0x274 0x470 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_LPUART5_CTS_B 0x084 0x274 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_LPSPI1_SDO 0x084 0x274 0x4F8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXIO1_D14 0x084 0x274 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_GPIO4_IO28 0x084 0x274 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0 0x088 0x278 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXPWM3_PWM0_A 0x088 0x278 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_LPUART6_RTS_B 0x088 0x278 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_LPSPI1_SDI 0x088 0x278 0x4F4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXIO1_D15 0x088 0x278 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_GPIO4_IO29 0x088 0x278 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08 0x08C 0x27C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_FLEXPWM3_PWM0_B 0x08C 0x27C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_LPUART6_CTS_B 0x08C 0x27C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_LPSPI1_PCS0 0x08C 0x27C 0x4EC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_30_CSI_DATA23 0x08C 0x27C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_GPIO4_IO30 0x08C 0x27C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09 0x090 0x280 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_FLEXPWM3_PWM1_A 0x090 0x280 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_LPUART7_TXD 0x090 0x280 0x55C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_31_LPSPI1_PCS1 0x090 0x280 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_CSI_DATA22 0x090 0x280 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_GPIO4_IO31 0x090 0x280 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10 0x094 0x284 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_FLEXPWM3_PWM1_B 0x094 0x284 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_LPUART7_RXD 0x094 0x284 0x558 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_32_CCM_PMIC_READY 0x094 0x284 0x3FC 0x3 0x4
+#define MXRT1050_IOMUXC_GPIO_EMC_32_CSI_DATA21 0x094 0x284 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_GPIO3_IO18 0x094 0x284 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11 0x098 0x288 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_FLEXPWM3_PWM2_A 0x098 0x288 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_USDHC1_RESET_B 0x098 0x288 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_SAI3_RX_DATA 0x098 0x288 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_CSI_DATA20 0x098 0x288 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_GPIO3_IO19 0x098 0x288 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12 0x09C 0x28C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_FLEXPWM3_PWM2_B 0x09C 0x28C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_USDHC1_VSELECT 0x09C 0x28C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_SAI3_RX_SYNC 0x09C 0x28C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_CSI_DATA19 0x09C 0x28C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_GPIO3_IO20 0x09C 0x28C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13 0x0A0 0x290 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_XBAR_INOUT18 0x0A0 0x290 0x630 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_GPT1_COMPARE1 0x0A0 0x290 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_SAI3_RX_BCLK 0x0A0 0x290 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_CSI_DATA18 0x0A0 0x290 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_GPIO3_IO21 0x0A0 0x290 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_USDHC1_CD_B 0x0A0 0x290 0x5D4 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14 0x0A4 0x294 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_XBAR_INOUT22 0x0A4 0x294 0x638 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_GPT1_COMPARE2 0x0A4 0x294 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_SAI3_TX_DATA 0x0A4 0x294 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_CSI_DATA17 0x0A4 0x294 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_GPIO3_IO22 0x0A4 0x294 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_USDHC1_WP 0x0A4 0x294 0x5D8 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15 0x0A8 0x298 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_XBAR_INOUT23 0x0A8 0x298 0x63C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_GPT1_COMPARE3 0x0A8 0x298 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_SAI3_MCLK 0x0A8 0x298 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_CSI_DATA16 0x0A8 0x298 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_GPIO3_IO23 0x0A8 0x298 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_USDHC2_WP 0x0A8 0x298 0x608 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01 0x0AC 0x29C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_FLEXPWM1_PWM3_A 0x0AC 0x29C 0x454 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_38_LPUART8_TXD 0x0AC 0x29C 0x564 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_38_SAI3_TX_BCLK 0x0AC 0x29C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_CSI_FIELD 0x0AC 0x29C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_GPIO3_IO24 0x0AC 0x29C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_USDHC2_VSELECT 0x0AC 0x29C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS 0x0B0 0x2A0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_FLEXPWM1_PWM3_B 0x0B0 0x2A0 0x464 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_39_LPUART8_RXD 0x0B0 0x2A0 0x560 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_39_SAI3_TX_SYNC 0x0B0 0x2A0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_WDOG1_B 0x0B0 0x2A0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_GPIO3_IO25 0x0B0 0x2A0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_USDHC2_CD_B 0x0B0 0x2A0 0x5E0 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_EMC_40_SEMC_RDY 0x0B4 0x2A4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_GPT2_CAPTURE2 0x0B4 0x2A4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_LPSPI1_PCS2 0x0B4 0x2A4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_USB_OTG2_OC 0x0B4 0x2A4 0x5CC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_40_ENET_MDC 0x0B4 0x2A4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_GPIO3_IO26 0x0B4 0x2A4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_USDHC2_RESET_B 0x0B4 0x2A4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_41_SEMC_CSX0 0x0B8 0x2A8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_GPT2_CAPTURE1 0x0B8 0x2A8 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_LPSPI1_PCS3 0x0B8 0x2A8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_USB_OTG2_PWR 0x0B8 0x2A8 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_ENET_MDIO 0x0B8 0x2A8 0x430 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_41_GPIO3_IO27 0x0B8 0x2A8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_USDHC2_VSELECT 0x0B8 0x2A8 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_FLEXPWM2_PWM3_A 0x0BC 0x2AC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_XBAR_INOUT14 0x0BC 0x2AC 0x644 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_REF_CLK_32K 0x0BC 0x2AC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USB_OTG2_ID 0x0BC 0x2AC 0x3F8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPI2C1_SCLS 0x0BC 0x2AC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_GPIO1_IO00 0x0BC 0x2AC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USDHC1_RESET_B 0x0BC 0x2AC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPSPI3_SCK 0x0BC 0x2AC 0x510 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_FLEXPWM2_PWM3_B 0x0C0 0x2B0 0x484 0x0 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_XBAR_INOUT15 0x0C0 0x2B0 0x648 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_REF_CLK_24M 0x0C0 0x2B0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_USB_OTG1_ID 0x0C0 0x2B0 0x3F4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPI2C1_SDAS 0x0C0 0x2B0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_GPIO1_IO01 0x0C0 0x2B0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_EWM_OUT_B 0x0C0 0x2B0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPSPI3_SDO 0x0C0 0x2B0 0x518 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXCAN2_TX 0x0C4 0x2B4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_XBAR_INOUT16 0x0C4 0x2B4 0x64C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPUART6_TXD 0x0C4 0x2B4 0x554 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_USB_OTG1_PWR 0x0C4 0x2B4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXPWM1_PWM0_X 0x0C4 0x2B4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0C4 0x2B4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPI2C1_HREQ 0x0C4 0x2B4 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPSPI3_SDI 0x0C4 0x2B4 0x514 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXCAN2_RX 0x0C8 0x2B8 0x450 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_XBAR_INOUT17 0x0C8 0x2B8 0x62C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPUART6_RXD 0x0C8 0x2B8 0x550 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_USB_OTG1_OC 0x0C8 0x2B8 0x5D0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXPWM1_PWM1_X 0x0C8 0x2B8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_GPIO1_IO03 0x0C8 0x2B8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_REF_CLK_24M 0x0C8 0x2B8 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPSPI3_PCS0 0x0C8 0x2B8 0x50C 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SRC_BOOT_MODE00 0x0CC 0x2BC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_MQS_RIGHT 0x0CC 0x2BC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_ENET_TX_DATA03 0x0CC 0x2BC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SAI2_TX_SYNC 0x0CC 0x2BC 0x5C4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_CSI_DATA09 0x0CC 0x2BC 0x41C 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_GPIO1_IO04 0x0CC 0x2BC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_PIT_TRIGGER00 0x0CC 0x2BC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_LPSPI3_PCS1 0x0CC 0x2BC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SRC_BOOT_MODE01 0x0D0 0x2C0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_MQS_LEFT 0x0D0 0x2C0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_ENET_TX_DATA02 0x0D0 0x2C0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SAI2_TX_BCLK 0x0D0 0x2C0 0x5C0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_CSI_DATA08 0x0D0 0x2C0 0x418 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_GPIO1_IO05 0x0D0 0x2C0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_XBAR_INOUT17 0x0D0 0x2C0 0x62C 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_LPSPI3_PCS2 0x0D0 0x2C0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_JTAG_TMS 0x0D4 0x2C4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPT2_COMPARE1 0x0D4 0x2C4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_ENET_RX_CLK 0x0D4 0x2C4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_SAI2_RX_BCLK 0x0D4 0x2C4 0x5B4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_CSI_DATA07 0x0D4 0x2C4 0x414 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPIO1_IO06 0x0D4 0x2C4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_XBAR_INOUT18 0x0D4 0x2C4 0x630 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_LPSPI3_PCS3 0x0D4 0x2C4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_JTAG_TCK 0x0D8 0x2C8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPT2_COMPARE2 0x0D8 0x2C8 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_TX_ER 0x0D8 0x2C8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_SAI2_RX_SYNC 0x0D8 0x2C8 0x5BC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_CSI_DATA06 0x0D8 0x2C8 0x410 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPIO1_IO07 0x0D8 0x2C8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_XBAR_INOUT19 0x0D8 0x2C8 0x654 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_1588_EVENT3_OUT 0x0D8 0x2C8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_JTAG_MOD 0x0DC 0x2CC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPT2_COMPARE3 0x0DC 0x2CC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_RX_DATA03 0x0DC 0x2CC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_SAI2_RX_DATA 0x0DC 0x2CC 0x5B8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_CSI_DATA05 0x0DC 0x2CC 0x40C 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPIO1_IO08 0x0DC 0x2CC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_XBAR_INOUT20 0x0DC 0x2CC 0x634 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_1588_EVENT3_IN 0x0DC 0x2CC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_JTAG_TDI 0x0E0 0x2D0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_FLEXPWM2_PWM3_A 0x0E0 0x2D0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_ENET_RX_DATA02 0x0E0 0x2D0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_SAI2_TX_DATA 0x0E0 0x2D0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_CSI_DATA04 0x0E0 0x2D0 0x408 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 0x0E0 0x2D0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_XBAR_INOUT21 0x0E0 0x2D0 0x658 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPT2_CLK 0x0E0 0x2D0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_JTAG_TDO 0x0E4 0x2D4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_FLEXPWM1_PWM3_A 0x0E4 0x2D4 0x454 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_CRS 0x0E4 0x2D4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_SAI2_MCLK 0x0E4 0x2D4 0x5B0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_CSI_DATA03 0x0E4 0x2D4 0x404 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_GPIO1_IO10 0x0E4 0x2D4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_XBAR_INOUT22 0x0E4 0x2D4 0x638 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_1588_EVENT0_OUT 0x0E4 0x2D4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_JTAG_TRSTB 0x0E8 0x2D8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_FLEXPWM1_PWM3_B 0x0E8 0x2D8 0x464 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_COL 0x0E8 0x2D8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_WDOG1_B 0x0E8 0x2D8 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_CSI_DATA02 0x0E8 0x2D8 0x400 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_GPIO1_IO11 0x0E8 0x2D8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_XBAR_INOUT23 0x0E8 0x2D8 0x63C 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_1588_EVENT0_IN 0x0E8 0x2D8 0x444 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPI2C4_SCL 0x0EC 0x2DC 0x4E4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_CCM_PMIC_READY 0x0EC 0x2DC 0x3FC 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0x0EC 0x2DC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_WDOG2_B 0x0EC 0x2DC 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_FLEXPWM1_PWM2_X 0x0EC 0x2DC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_GPIO1_IO12 0x0EC 0x2DC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_ENET_1588_EVENT1_OUT 0x0EC 0x2DC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_NMI 0x0EC 0x2DC 0x568 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPI2C4_SDA 0x0F0 0x2E0 0x4E8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPT1_CLK 0x0F0 0x2E0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0x0F0 0x2E0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_EWM_OUT_B 0x0F0 0x2E0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_FLEXPWM1_PWM3_X 0x0F0 0x2E0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPIO1_IO13 0x0F0 0x2E0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_ENET_1588_EVENT1_IN 0x0F0 0x2E0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_REF_CLK_24M 0x0F0 0x2E0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_USB_OTG2_OC 0x0F4 0x2E4 0x5CC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_XBAR_INOUT24 0x0F4 0x2E4 0x640 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_LPUART1_CTS_B 0x0F4 0x2E4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_ENET_1588_EVENT0_OUT 0x0F4 0x2E4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_CSI_VSYNC 0x0F4 0x2E4 0x428 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_GPIO1_IO14 0x0F4 0x2E4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX 0x0F4 0x2E4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_USB_OTG2_PWR 0x0F8 0x2E8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_XBAR_INOUT25 0x0F8 0x2E8 0x650 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_LPUART1_RTS_B 0x0F8 0x2E8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_ENET_1588_EVENT0_IN 0x0F8 0x2E8 0x444 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_CSI_HSYNC 0x0F8 0x2E8 0x420 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_GPIO1_IO15 0x0F8 0x2E8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX 0x0F8 0x2E8 0x450 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_WDOG1_WDOG_RST_B_DEB 0x0F8 0x2E8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USB_OTG2_ID 0x0FC 0x2EC 0x3F8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_TMR3_TIMER0 0x0FC 0x2EC 0x57C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPUART2_CTS_B 0x0FC 0x2EC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL 0x0FC 0x2EC 0x4CC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_WDOG1_B 0x0FC 0x2EC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_GPIO1_IO16 0x0FC 0x2EC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USDHC1_WP 0x0FC 0x2EC 0x5D8 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_KPP_ROW07 0x0FC 0x2EC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USB_OTG1_PWR 0x100 0x2F0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_TMR3_TIMER1 0x100 0x2F0 0x580 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPUART2_RTS_B 0x100 0x2F0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA 0x100 0x2F0 0x4D0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_CCM_PMIC_READY 0x100 0x2F0 0x3FC 0x4 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_GPIO1_IO17 0x100 0x2F0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USDHC1_VSELECT 0x100 0x2F0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_KPP_COL07 0x100 0x2F0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USB_OTG1_ID 0x104 0x2F4 0x3F4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_TMR3_TIMER2 0x104 0x2F4 0x584 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_LPUART2_TXD 0x104 0x2F4 0x530 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_SPDIF_OUT 0x104 0x2F4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_ENET_1588_EVENT2_OUT 0x104 0x2F4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_GPIO1_IO18 0x104 0x2F4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USDHC1_CD_B 0x104 0x2F4 0x5D4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_KPP_ROW06 0x104 0x2F4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USB_OTG1_OC 0x108 0x2F8 0x5D0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_TMR3_TIMER3 0x108 0x2F8 0x588 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_LPUART2_RXD 0x108 0x2F8 0x52C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_SPDIF_IN 0x108 0x2F8 0x5C8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_ENET_1588_EVENT2_IN 0x108 0x2F8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_GPIO1_IO19 0x108 0x2F8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USDHC2_CD_B 0x108 0x2F8 0x5E0 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_KPP_COL06 0x108 0x2F8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_FLEXSPI_B_DATA3 0x10C 0x2FC 0x4C4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_ENET_MDC 0x10C 0x2FC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_LPUART3_CTS_B 0x10C 0x2FC 0x534 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_SPDIF_SR_CLK 0x10C 0x2FC 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK 0x10C 0x2FC 0x424 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_GPIO1_IO20 0x10C 0x2FC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_USDHC2_DATA0 0x10C 0x2FC 0x5E8 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_KPP_ROW05 0x10C 0x2FC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_FLEXSPI_B_DATA2 0x110 0x300 0x4C0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_ENET_MDIO 0x110 0x300 0x430 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_LPUART3_RTS_B 0x110 0x300 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_SPDIF_OUT 0x110 0x300 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_CSI_MCLK 0x110 0x300 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_GPIO1_IO21 0x110 0x300 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_USDHC2_DATA1 0x110 0x300 0x5EC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_KPP_COL05 0x110 0x300 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_FLEXSPI_B_DATA1 0x114 0x304 0x4BC 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA 0x114 0x304 0x4E0 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPUART3_TXD 0x114 0x304 0x53C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_SPDIF_LOCK 0x114 0x304 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_CSI_VSYNC 0x114 0x304 0x428 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_GPIO1_IO22 0x114 0x304 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_USDHC2_DATA2 0x114 0x304 0x5F0 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_KPP_ROW04 0x114 0x304 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_FLEXSPI_B_DATA0 0x118 0x308 0x4B8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL 0x118 0x308 0x4DC 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPUART3_RXD 0x118 0x308 0x538 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_SPDIF_EXT_CLK 0x118 0x308 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_CSI_HSYNC 0x118 0x308 0x420 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_GPIO1_IO23 0x118 0x308 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_USDHC2_DATA3 0x118 0x308 0x5F4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_KPP_COL04 0x118 0x308 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXSPI_A_SS1_B 0x11C 0x30C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXPWM4_PWM0_A 0x11C 0x30C 0x494 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXCAN1_TX 0x11C 0x30C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CCM_PMIC_READY 0x11C 0x30C 0x3FC 0x3 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CSI_DATA09 0x11C 0x30C 0x41C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_GPIO1_IO24 0x11C 0x30C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_USDHC2_CMD 0x11C 0x30C 0x5E4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_KPP_ROW03 0x11C 0x30C 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXSPI_A_DQS 0x120 0x310 0x4A4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXPWM4_PWM1_A 0x120 0x310 0x498 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXCAN1_RX 0x120 0x310 0x44C 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_SAI1_MCLK 0x120 0x310 0x58C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_CSI_DATA08 0x120 0x310 0x418 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_GPIO1_IO25 0x120 0x310 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_USDHC2_CLK 0x120 0x310 0x5DC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_KPP_COL03 0x120 0x310 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_FLEXSPI_A_DATA3 0x124 0x314 0x4B4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_WDOG1_B 0x124 0x314 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_LPUART8_TXD 0x124 0x314 0x564 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_SAI1_RX_SYNC 0x124 0x314 0x5A4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_CSI_DATA07 0x124 0x314 0x414 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_GPIO1_IO26 0x124 0x314 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_USDHC2_WP 0x124 0x314 0x608 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_KPP_ROW02 0x124 0x314 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_FLEXSPI_A_DATA2 0x128 0x318 0x4B0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_EWM_OUT_B 0x128 0x318 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_LPUART8_RXD 0x128 0x318 0x560 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_SAI1_RX_BCLK 0x128 0x318 0x590 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_CSI_DATA06 0x128 0x318 0x410 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_GPIO1_IO27 0x128 0x318 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_USDHC2_RESET_B 0x128 0x318 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_KPP_COL02 0x128 0x318 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_FLEXSPI_A_DATA1 0x12C 0x31C 0x4AC 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_ACMP1_OUT 0x12C 0x31C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_LPSPI3_PCS0 0x12C 0x31C 0x50C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_SAI1_RX_DATA00 0x12C 0x31C 0x594 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_CSI_DATA05 0x12C 0x31C 0x40C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_GPIO1_IO28 0x12C 0x31C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_USDHC2_DATA4 0x12C 0x31C 0x5F8 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_KPP_ROW01 0x12C 0x31C 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_FLEXSPI_A_DATA0 0x130 0x320 0x4A8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_ACMP2_OUT 0x130 0x320 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_LPSPI3_SDI 0x130 0x320 0x514 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_SAI1_TX_DATA00 0x130 0x320 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_CSI_DATA04 0x130 0x320 0x408 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_GPIO1_IO29 0x130 0x320 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_USDHC2_DATA5 0x130 0x320 0x5FC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_KPP_COL01 0x130 0x320 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_FLEXSPI_A_SCLK 0x134 0x324 0x4C8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_ACMP3_OUT 0x134 0x324 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO 0x134 0x324 0x518 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_SAI1_TX_BCLK 0x134 0x324 0x5A8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_CSI_DATA03 0x134 0x324 0x404 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_GPIO1_IO30 0x134 0x324 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_USDHC2_DATA6 0x134 0x324 0x600 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_KPP_ROW00 0x134 0x324 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_FLEXSPI_A_SS0_B 0x138 0x328 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_ACMP4_OUT 0x138 0x328 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_LPSPI3_SCK 0x138 0x328 0x510 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_SAI1_TX_SYNC 0x138 0x328 0x5AC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_CSI_DATA02 0x138 0x328 0x400 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_GPIO1_IO31 0x138 0x328 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_USDHC2_DATA7 0x138 0x328 0x604 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_KPP_COL00 0x138 0x328 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x13C 0x32C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_TMR1_TIMER0 0x13C 0x32C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_MQS_RIGHT 0x13C 0x32C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_LPSPI4_PCS0 0x13C 0x32C 0x51C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_FLEXIO2_D00 0x13C 0x32C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_GPIO2_IO00 0x13C 0x32C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_SEMC_CSX1 0x13C 0x32C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x140 0x330 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_TMR1_TIMER1 0x140 0x330 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_MQS_LEFT 0x140 0x330 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_LPSPI4_SDI 0x140 0x330 0x524 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_FLEXIO2_D01 0x140 0x330 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_GPIO2_IO01 0x140 0x330 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_SEMC_CSX2 0x140 0x330 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x144 0x334 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_TMR1_TIMER2 0x144 0x334 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXCAN1_TX 0x144 0x334 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_LPSPI4_SDO 0x144 0x334 0x528 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXIO2_D02 0x144 0x334 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_GPIO2_IO02 0x144 0x334 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_SEMC_CSX3 0x144 0x334 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x148 0x338 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_TMR2_TIMER0 0x148 0x338 0x56C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXCAN1_RX 0x148 0x338 0x44C 0x2 0x3
+#define MXRT1050_IOMUXC_GPIO_B0_03_LPSPI4_SCK 0x148 0x338 0x520 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXIO2_D03 0x148 0x338 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_GPIO2_IO03 0x148 0x338 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_WDOG2_RESET_B_DEB 0x148 0x338 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x14C 0x33C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_TMR2_TIMER1 0x14C 0x33C 0x570 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_04_LPI2C2_SCL 0x14C 0x33C 0x4D4 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_04_ARM_TRACE00 0x14C 0x33C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_FLEXIO2_D04 0x14C 0x33C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_GPIO2_IO04 0x14C 0x33C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_SRC_BT_CFG00 0x14C 0x33C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x150 0x340 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_TMR2_TIMER2 0x150 0x340 0x574 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_05_LPI2C2_SDA 0x150 0x340 0x4D8 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_05_ARM_TRACE01 0x150 0x340 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_FLEXIO2_D05 0x150 0x340 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_GPIO2_IO05 0x150 0x340 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_SRC_BT_CFG01 0x150 0x340 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x154 0x344 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_TMR3_TIMER0 0x154 0x344 0x57C 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXPWM2_PWM0_A 0x154 0x344 0x478 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_06_ARM_TRACE02 0x154 0x344 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXIO2_D06 0x154 0x344 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_GPIO2_IO06 0x154 0x344 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_SRC_BT_CFG02 0x154 0x344 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x158 0x348 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_TMR3_TIMER1 0x158 0x348 0x580 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXPWM2_PWM0_B 0x158 0x348 0x488 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_07_ARM_TRACE03 0x158 0x348 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXIO2_D07 0x158 0x348 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_GPIO2_IO07 0x158 0x348 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_SRC_BT_CFG03 0x158 0x348 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x15C 0x34C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_TMR3_TIMER2 0x15C 0x34C 0x584 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXPWM2_PWM1_A 0x15C 0x34C 0x47C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_08_LPUART3_TXD 0x15C 0x34C 0x53C 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXIO2_D08 0x15C 0x34C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_GPIO2_IO08 0x15C 0x34C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_SRC_BT_CFG04 0x15C 0x34C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x160 0x350 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_TMR4_TIMER0 0x160 0x350 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXPWM2_PWM1_B 0x160 0x350 0x48C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_09_LPUART3_RXD 0x160 0x350 0x538 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXIO2_D09 0x160 0x350 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_GPIO2_IO09 0x160 0x350 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_SRC_BT_CFG05 0x160 0x350 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x164 0x354 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_TMR4_TIMER1 0x164 0x354 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXPWM2_PWM2_A 0x164 0x354 0x480 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_10_SAI1_TX_DATA03 0x164 0x354 0x598 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXIO2_D10 0x164 0x354 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_GPIO2_IO10 0x164 0x354 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_SRC_BT_CFG06 0x164 0x354 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x168 0x358 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_TMR4_TIMER2 0x168 0x358 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXPWM2_PWM2_B 0x168 0x358 0x490 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_11_SAI1_TX_DATA02 0x168 0x358 0x59C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXIO2_D11 0x168 0x358 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_GPIO2_IO11 0x168 0x358 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_SRC_BT_CFG07 0x168 0x358 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x16C 0x35C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_XBAR_INOUT10 0x16C 0x35C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_ARM_TRACE_CLK 0x16C 0x35C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_SAI1_TX_DATA01 0x16C 0x35C 0x5A0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_12_FLEXIO2_D12 0x16C 0x35C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_GPIO2_IO12 0x16C 0x35C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_SRC_BT_CFG08 0x16C 0x35C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x170 0x360 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_XBAR_INOUT11 0x170 0x360 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_ARM_TRACE_SWO 0x170 0x360 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_SAI1_MCLK 0x170 0x360 0x58C 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_13_FLEXIO2_D13 0x170 0x360 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_GPIO2_IO13 0x170 0x360 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_SRC_BT_CFG09 0x170 0x360 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x174 0x364 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_XBAR_INOUT12 0x174 0x364 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_ARM_CM7_TXEV 0x174 0x364 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_SAI1_RX_SYNC 0x174 0x364 0x5A4 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_14_FLEXIO2_D14 0x174 0x364 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_GPIO2_IO14 0x174 0x364 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_SRC_BT_CFG10 0x174 0x364 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x178 0x368 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_XBAR_INOUT13 0x178 0x368 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_ARM_CM7_RXEV 0x178 0x368 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_SAI1_RX_BCLK 0x178 0x368 0x590 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_15_FLEXIO2_D15 0x178 0x368 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_GPIO2_IO15 0x178 0x368 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_SRC_BT_CFG11 0x178 0x368 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_00_LCD_DATA12 0x17C 0x36C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_XBAR_INOUT14 0x17C 0x36C 0x644 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_00_LPUART4_TXD 0x17C 0x36C 0x544 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_00_SAI1_RX_DATA00 0x17C 0x36C 0x594 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXIO2_D16 0x17C 0x36C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_GPIO2_IO16 0x17C 0x36C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXPWM1_PWM3_A 0x17C 0x36C 0x454 0x6 0x4
+
+#define MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x180 0x370 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_XBAR_INOUT15 0x180 0x370 0x648 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_01_LPUART4_RXD 0x180 0x370 0x540 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_01_SAI1_TX_DATA00 0x180 0x370 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXIO2_D17 0x180 0x370 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_GPIO2_IO17 0x180 0x370 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXPWM1_PWM3_B 0x180 0x370 0x464 0x6 0x4
+
+#define MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x184 0x374 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_XBAR_INOUT16 0x184 0x374 0x64C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_02_LPSPI4_PCS2 0x184 0x374 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_SAI1_TX_BCLK 0x184 0x374 0x5A8 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXIO2_D18 0x184 0x374 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_GPIO2_IO18 0x184 0x374 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXPWM2_PWM3_A 0x184 0x374 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x188 0x378 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_XBAR_INOUT17 0x188 0x378 0x62C 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_B1_03_LPSPI4_PCS1 0x188 0x378 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_SAI1_TX_SYNC 0x188 0x378 0x5AC 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXIO2_D19 0x188 0x378 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_GPIO2_IO19 0x188 0x378 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXPWM2_PWM3_B 0x188 0x378 0x484 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_04_LCD_DATA16 0x18C 0x37C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_LPSPI4_PCS0 0x18C 0x37C 0x51C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_04_CSI_DATA15 0x18C 0x37C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_ENET_RX_DATA00 0x18C 0x37C 0x434 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_04_FLEXIO2_D20 0x18C 0x37C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_GPIO2_IO20 0x18C 0x37C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_05_LCD_DATA17 0x190 0x380 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_LPSPI4_SDI 0x190 0x380 0x524 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_05_CSI_DATA14 0x190 0x380 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_ENET_RX_DATA01 0x190 0x380 0x438 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_05_FLEXIO2_D21 0x190 0x380 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_GPIO2_IO21 0x190 0x380 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_06_LCD_DATA18 0x194 0x384 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_LPSPI4_SDO 0x194 0x384 0x528 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_06_CSI_DATA13 0x194 0x384 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_ENET_RX_EN 0x194 0x384 0x43C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_06_FLEXIO2_D22 0x194 0x384 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_GPIO2_IO22 0x194 0x384 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_07_LCD_DATA19 0x198 0x388 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_LPSPI4_SCK 0x198 0x388 0x520 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_07_CSI_DATA12 0x198 0x388 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_ENET_TX_DATA00 0x198 0x388 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_FLEXIO2_D23 0x198 0x388 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_GPIO2_IO23 0x198 0x388 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_08_LCD_DATA20 0x19C 0x38C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_TMR1_TIMER3 0x19C 0x38C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_CSI_DATA11 0x19C 0x38C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_ENET_TX_DATA01 0x19C 0x38C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXIO2_D24 0x19C 0x38C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_GPIO2_IO24 0x19C 0x38C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXCAN2_TX 0x19C 0x38C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_09_LCD_DATA21 0x1A0 0x390 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_TMR2_TIMER3 0x1A0 0x390 0x578 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_09_CSI_DATA10 0x1A0 0x390 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_ENET_TX_EN 0x1A0 0x390 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXIO2_D25 0x1A0 0x390 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_GPIO2_IO25 0x1A0 0x390 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXCAN2_RX 0x1A0 0x390 0x450 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_10_LCD_DATA22 0x1A4 0x394 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_TMR3_TIMER3 0x1A4 0x394 0x588 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_10_CSI_DATA00 0x1A4 0x394 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_TX_CLK 0x1A4 0x394 0x448 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_10_FLEXIO2_D26 0x1A4 0x394 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_GPIO2_IO26 0x1A4 0x394 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_REF_CLK 0x1A4 0x394 0x42C 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_B1_11_LCD_DATA23 0x1A8 0x398 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_TMR4_TIMER3 0x1A8 0x398 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_CSI_DATA01 0x1A8 0x398 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_ENET_RX_ER 0x1A8 0x398 0x440 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_11_FLEXIO2_D27 0x1A8 0x398 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_GPIO2_IO27 0x1A8 0x398 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_LPSPI4_PCS3 0x1A8 0x398 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_12_LPUART5_TXD 0x1AC 0x39C 0x54C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_12_CSI_PIXCLK 0x1AC 0x39C 0x424 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_12_ENET_1588_EVENT0_IN 0x1AC 0x39C 0x444 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_12_FLEXIO2_D28 0x1AC 0x39C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_12_GPIO2_IO28 0x1AC 0x39C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1AC 0x39C 0x5D4 0x6 0x2
+
+#define MXRT1050_IOMUXC_GPIO_B1_13_WDOG1_B 0x1B0 0x3A0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_LPUART5_RXD 0x1B0 0x3A0 0x548 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_13_CSI_VSYNC 0x1B0 0x3A0 0x428 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_13_ENET_1588_EVENT0_OUT 0x1B0 0x3A0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_FLEXIO2_D29 0x1B0 0x3A0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_GPIO2_IO29 0x1B0 0x3A0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_USDHC1_WP 0x1B0 0x3A0 0x5D8 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_14_ENET_MDC 0x1B4 0x3A4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXPWM4_PWM2_A 0x1B4 0x3A4 0x49C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_14_CSI_HSYNC 0x1B4 0x3A4 0x420 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_14_XBAR_INOUT02 0x1B4 0x3A4 0x60C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXIO2_D30 0x1B4 0x3A4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_GPIO2_IO30 0x1B4 0x3A4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0x1B4 0x3A4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_15_ENET_MDIO 0x1B8 0x3A8 0x430 0x0 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXPWM4_PWM3_A 0x1B8 0x3A8 0x4A0 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_15_CSI_MCLK 0x1B8 0x3A8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_XBAR_INOUT03 0x1B8 0x3A8 0x610 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXIO2_D31 0x1B8 0x3A8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x1B8 0x3A8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_USDHC1_RESET_B 0x1B8 0x3A8 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x1BC 0x3AC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXPWM1_PWM0_A 0x1BC 0x3AC 0x458 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPI2C3_SCL 0x1BC 0x3AC 0x4DC 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_XBAR_INOUT04 0x1BC 0x3AC 0x614 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPSPI1_SCK 0x1BC 0x3AC 0x4F0 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_GPIO3_IO12 0x1BC 0x3AC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXSPI_A_SS1_B 0x1BC 0x3AC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x1C0 0x3B0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXPWM1_PWM0_B 0x1C0 0x3B0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPI2C3_SDA 0x1C0 0x3B0 0x4E0 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_XBAR_INOUT05 0x1C0 0x3B0 0x618 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPSPI1_PCS0 0x1C0 0x3B0 0x4EC 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_GPIO3_IO13 0x1C0 0x3B0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXSPI_B_SS1_B 0x1C0 0x3B0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x1C4 0x3B4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_FLEXPWM1_PWM1_A 0x1C4 0x3B4 0x45C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPUART8_CTS_B 0x1C4 0x3B4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_XBAR_INOUT06 0x1C4 0x3B4 0x61C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO 0x1C4 0x3B4 0x4F8 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_GPIO3_IO14 0x1C4 0x3B4 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x1C8 0x3B8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_FLEXPWM1_PWM1_B 0x1C8 0x3B8 0x46C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPUART8_RTS_B 0x1C8 0x3B8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_XBAR_INOUT07 0x1C8 0x3B8 0x620 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI 0x1C8 0x3B8 0x4F4 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_GPIO3_IO15 0x1C8 0x3B8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x1CC 0x3BC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXPWM1_PWM2_A 0x1CC 0x3BC 0x460 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_LPUART8_TXD 0x1CC 0x3BC 0x564 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_XBAR_INOUT08 0x1CC 0x3BC 0x624 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXSPI_B_SS0_B 0x1CC 0x3BC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_GPIO3_IO16 0x1CC 0x3BC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_CCM_CLKO1 0x1CC 0x3BC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x1D0 0x3C0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXPWM1_PWM2_B 0x1D0 0x3C0 0x470 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_LPUART8_RXD 0x1D0 0x3C0 0x560 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_XBAR_INOUT09 0x1D0 0x3C0 0x628 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXSPI_B_DQS 0x1D0 0x3C0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_GPIO3_IO17 0x1D0 0x3C0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_CCM_CLKO2 0x1D0 0x3C0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_USDHC2_DATA3 0x1D4 0x3C4 0x5F4 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXSPI_B_DATA3 0x1D4 0x3C4 0x4C4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXPWM1_PWM3_A 0x1D4 0x3C4 0x454 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_SAI1_TX_DATA03 0x1D4 0x3C4 0x598 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_LPUART4_TXD 0x1D4 0x3C4 0x544 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_GPIO3_IO00 0x1D4 0x3C4 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_USDHC2_DATA2 0x1D8 0x3C8 0x5F0 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXSPI_B_DATA2 0x1D8 0x3C8 0x4C0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXPWM1_PWM3_B 0x1D8 0x3C8 0x464 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_SAI1_TX_DATA02 0x1D8 0x3C8 0x59C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_LPUART4_RXD 0x1D8 0x3C8 0x540 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_GPIO3_IO01 0x1D8 0x3C8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_USDHC2_DATA1 0x1DC 0x3CC 0x5EC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXSPI_B_DATA1 0x1DC 0x3CC 0x4BC 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXPWM2_PWM3_A 0x1DC 0x3CC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_SAI1_TX_DATA01 0x1DC 0x3CC 0x5A0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXCAN1_TX 0x1DC 0x3CC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_GPIO3_IO02 0x1DC 0x3CC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_CCM_WAIT 0x1DC 0x3CC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_USDHC2_DATA0 0x1E0 0x3D0 0x5E8 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXSPI_B_DATA0 0x1E0 0x3D0 0x4B8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXPWM2_PWM3_B 0x1E0 0x3D0 0x484 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_SAI1_MCLK 0x1E0 0x3D0 0x58C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXCAN1_RX 0x1E0 0x3D0 0x44C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_GPIO3_IO03 0x1E0 0x3D0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_CCM_PMIC_READY 0x1E0 0x3D0 0x3FC 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_USDHC2_CLK 0x1E4 0x3D4 0x5DC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXSPI_B_SCLK 0x1E4 0x3D4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_LPI2C1_SCL 0x1E4 0x3D4 0x4CC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_SAI1_RX_SYNC 0x1E4 0x3D4 0x5A4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXCAN1_A_SS1_B 0x1E4 0x3D4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_GPIO3_IO04 0x1E4 0x3D4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_CCM_STOP 0x1E4 0x3D4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_USDHC2_CMD 0x1E8 0x3D8 0x5E4 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXSPI_A_DQS 0x1E8 0x3D8 0x4A4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_LPI2C1_SDA 0x1E8 0x3D8 0x4D0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_SAI1_RX_BCLK 0x1E8 0x3D8 0x590 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXCAN1_B_SS0_B 0x1E8 0x3D8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_GPIO3_IO05 0x1E8 0x3D8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_USDHC2_RESET_B 0x1EC 0x3DC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_SS0_B 0x1EC 0x3DC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPUART7_CTS_B 0x1EC 0x3DC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_SAI1_RX_DATA00 0x1EC 0x3DC 0x594 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPSPI2_PCS0 0x1EC 0x3DC 0x4FC 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_GPIO3_IO06 0x1EC 0x3DC 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SEMC_CSX1 0x1F0 0x3E0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK 0x1F0 0x3E0 0x4C8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPUART7_RTS_B 0x1F0 0x3E0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SAI1_TX_DATA00 0x1F0 0x3E0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPSPI2_SCK 0x1F0 0x3E0 0x500 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_GPIO3_IO07 0x1F0 0x3E0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_CCM_REF_EN_B 0x1F0 0x3E0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_USDHC2_DATA4 0x1F4 0x3E4 0x5F8 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA0 0x1F4 0x3E4 0x4A8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPUART7_TXD 0x1F4 0x3E4 0x55C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SAI1_TX_BLCK 0x1F4 0x3E4 0x5A8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPSPI2_SDO 0x1F4 0x3E4 0x508 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_GPIO3_IO08 0x1F4 0x3E4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SEMC_CSX2 0x1F4 0x3E4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_USDHC2_DATA5 0x1F8 0x3E8 0x5FC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA1 0x1F8 0x3E8 0x4AC 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPUART7_RXD 0x1F8 0x3E8 0x558 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_SAI1_TX_SYNC 0x1F8 0x3E8 0x5AC 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPSPI2_SDI 0x1F8 0x3E8 0x504 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_GPIO3_IO09 0x1F8 0x3E8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_USDHC2_DATA6 0x1FC 0x3EC 0x600 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA2 0x1FC 0x3EC 0x4B0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPUART2_RXD 0x1FC 0x3EC 0x52C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPI2C2_SDA 0x1FC 0x3EC 0x4D8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPSPI2_PCS2 0x1FC 0x3EC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_GPIO3_IO10 0x1FC 0x3EC 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_USDHC2_DATA7 0x200 0x3F0 0x604 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_DATA3 0x200 0x3F0 0x4B4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPUART2_TXD 0x200 0x3F0 0x530 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPI2C2_SCL 0x200 0x3F0 0x4D4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPSPI2_PCS3 0x200 0x3F0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_GPIO3_IO11 0x200 0x3F0 0x000 0x5 0x0
+
+#endif /* _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H */
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
index a1c03c965f17..b7cbc90e1c18 100644
--- a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: ISC
/*
- * Device Tree file for Gateway 7001 AP
+ * Device Tree file for Gateway 7001 AP based on IXP422
* Derived from boardfiles written by Imre Kaloz
*/
@@ -29,7 +29,6 @@
aliases {
/* second UART is the primary console */
serial0 = &uart1;
- serial1 = &uart0;
};
soc {
diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
index a57009436ed8..df2ca6d95ee5 100644
--- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
@@ -10,26 +10,26 @@
#include <dt-bindings/input/input.h>
/ {
- model = "Netgear WG302 v2";
- compatible = "netgear,wg302v2", "intel,ixp42x";
+ model = "Netgear WG302 v1";
+ compatible = "netgear,wg302v1", "intel,ixp42x";
#address-cells = <1>;
#size-cells = <1>;
memory@0 {
- /* 16 MB SDRAM according to OpenWrt database */
+ /* 32 MB SDRAM according to boot arguments */
device_type = "memory";
- reg = <0x00000000 0x01000000>;
+ reg = <0x00000000 0x02000000>;
};
chosen {
- bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
- stdout-path = "uart1:115200n8";
+ /* The RedBoot comes up in 9600 baud so let's keep this */
+ bootargs = "console=ttyS0,9600n8";
+ stdout-path = "uart1:9600n8";
};
aliases {
/* These are switched around */
serial0 = &uart1;
- serial1 = &uart0;
};
soc {
@@ -38,18 +38,17 @@
compatible = "intel,ixp4xx-flash", "cfi-flash";
bank-width = <2>;
/*
- * 32 MB of Flash in 128 0x20000 sized blocks
- * mapped in at CS0 and CS1
+ * 8 MB of Flash in 64 0x20000 sized blocks
+ * mapped in at CS0.
*/
- reg = <0 0x00000000 0x2000000>;
+ reg = <0 0x00000000 0x800000>;
/* Configure expansion bus to allow writes */
intel,ixp4xx-eb-write-enable = <1>;
partitions {
compatible = "redboot-fis";
- /* CHECKME: guess this is Redboot FIS */
- fis-index-block = <0xff>;
+ fis-index-block = <0x3f>;
};
};
};
@@ -82,14 +81,14 @@
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
- phy-handle = <&phy8>;
+ phy-handle = <&phy30>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
- phy8: ethernet-phy@8 {
- reg = <8>;
+ phy30: ethernet-phy@30 {
+ reg = <30>;
};
};
};
diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi
index d0e0f8afb7c9..84cee8ec3ab8 100644
--- a/arch/arm/boot/dts/intel-ixp42x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp42x.dtsi
@@ -9,7 +9,7 @@
soc {
bus@c4000000 {
compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
- reg = <0xc4000000 0x28>;
+ reg = <0xc4000000 0x30>;
};
pci@c0000000 {
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 849034a49a3f..03caea6fc6ff 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -181,7 +181,7 @@
};
&gpio2 {
- touch-interrupt {
+ touch-interrupt-hog {
gpio-hog;
gpios = <12 GPIO_ACTIVE_LOW>;
input;
diff --git a/arch/arm/boot/dts/kirkwood-c200-v1.dts b/arch/arm/boot/dts/kirkwood-c200-v1.dts
new file mode 100644
index 000000000000..f59ff7578dfc
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Ctera C200 V1 Board Description
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Ctera C200 V1";
+ compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+
+ power {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ };
+
+ usb1 {
+ label = "USB1 Button";
+ linux,code = <BTN_0>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2 {
+ label = "USB2 Button";
+ linux,code = <BTN_1>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_poweroff>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_leds>;
+ pinctrl-names = "default";
+
+ led-0 {
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_DISK;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ led-4 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-5 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-6 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-7 {
+ function = LED_FUNCTION_DISK_ERR;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-8 {
+ function = LED_FUNCTION_DISK_ERR;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-9 {
+ function = LED_FUNCTION_USB;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-10 {
+ function = LED_FUNCTION_USB;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port2>;
+ };
+
+ led-11 {
+ function = LED_FUNCTION_USB;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-12 {
+ function = LED_FUNCTION_USB;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port1>;
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+};
+
+&eth0port {
+ phy-handle = <&ethphy9>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ rtc@30 {
+ compatible = "s35390a";
+ reg = <0x30>;
+ };
+
+ lm63@4c {
+ compatible = "national,lm63";
+ reg = <0x4c>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy9: ethernet-phy@9 {
+ reg = <9>;
+ };
+};
+
+&nand {
+ status = "okay";
+ chip-delay = <40>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0000000 0x200000>;
+ };
+
+ partition@200000 {
+ label = "certificate";
+ reg = <0x0200000 0x100000>;
+ };
+
+ partition@300000 {
+ label = "preset_cfg";
+ reg = <0x0300000 0x100000>;
+ };
+
+ partition@400000 {
+ label = "dev_params";
+ reg = <0x0400000 0x100000>;
+ };
+
+ partition@500000 {
+ label = "active_bank";
+ reg = <0x0500000 0x0100000>;
+ };
+
+ partition@600000 {
+ label = "magic";
+ reg = <0x0600000 0x0100000>;
+ };
+
+ partition@700000 {
+ label = "bank1";
+ reg = <0x0700000 0x2800000>;
+ };
+
+ partition@2f00000 {
+ label = "bank2";
+ reg = <0x2f00000 0x2800000>;
+ };
+
+ /* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+ partition@5a00000 {
+ label = "reserved";
+ reg = <0x5a00000 0x2000000>;
+ };
+
+ partition@7a00000 {
+ label = "rootfs";
+ reg = <0x7a00000 0x8600000>;
+ };
+};
+
+&pinctrl {
+ /* Buzzer gpios are connected to two pins of buzzer.
+ * This buzzer require a modulated signal from gpio.
+ * Leave it as is due lack of proper driver.
+ */
+ pmx_buzzer: pmx-buzzer {
+ marvell,pins = "mpp12", "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_leds: pmx-leds {
+ marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38",
+ "mpp39", "mpp40", "mpp42", "mpp43", "mpp44",
+ "mpp45", "mpp46", "mpp47";
+ marvell,function = "gpio";
+ };
+
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49";
+ marvell,function = "gpio";
+ };
+
+ pmx_poweroff: pmx-poweroff {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+};
+
+&rtc {
+ status = "disabled";
+};
+
+&sata {
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ #trigger-source-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ hub_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
new file mode 100644
index 000000000000..3281af90ac6d
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8291.dts - Device Tree file for PCB8291
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+
+/ {
+ model = "Microchip EVB - LAN9662";
+ compatible = "microchip,lan9662-pcb8291", "microchip,lan9662", "microchip,lan966";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &usart3;
+ };
+};
+
+&gpio {
+ fc_shrd7_pins: fc_shrd7-pins {
+ pins = "GPIO_49";
+ function = "fc_shrd7";
+ };
+
+ fc_shrd8_pins: fc_shrd8-pins {
+ pins = "GPIO_54";
+ function = "fc_shrd8";
+ };
+
+ fc3_b_pins: fcb3-spi-pins {
+ /* SCK, RXD, TXD */
+ pins = "GPIO_51", "GPIO_52", "GPIO_53";
+ function = "fc3_b";
+ };
+
+ can0_b_pins: can0_b_pins {
+ /* RX, TX */
+ pins = "GPIO_35", "GPIO_36";
+ function = "can0_b";
+ };
+};
+
+&can0 {
+ pinctrl-0 = <&can0_b_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&flx3 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "okay";
+
+ usart3: serial@200 {
+ pinctrl-0 = <&fc3_b_pins>, <&fc_shrd7_pins>, <&fc_shrd8_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+};
+
+&watchdog {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
new file mode 100644
index 000000000000..7d2869648050
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC
+ *
+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ * Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/microchip,lan966x.h>
+
+/ {
+ model = "Microchip LAN966 family SoC";
+ compatible = "microchip,lan966";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ clock-frequency = <600000000>;
+ reg = <0x0>;
+ };
+ };
+
+ clocks {
+ sys_clk: sys_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <162500000>;
+ };
+
+ cpu_clk: cpu_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ };
+
+ ddr_clk: ddr_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <300000000>;
+ };
+
+ nic_clk: nic_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ };
+
+ clks: clock-controller@e00c00a8 {
+ compatible = "microchip,lan966x-gck";
+ #clock-cells = <1>;
+ clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+ clock-names = "cpu", "ddr", "sys";
+ reg = <0xe00c00a8 0x38>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <37500000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flx0: flexcom@e0040000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe0040000 0x100>;
+ clocks = <&clks GCK_ID_FLEXCOM0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0040000 0x800>;
+ status = "disabled";
+ };
+
+ flx1: flexcom@e0044000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe0044000 0x100>;
+ clocks = <&clks GCK_ID_FLEXCOM1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0044000 0x800>;
+ status = "disabled";
+ };
+
+ trng: rng@e0048000 {
+ compatible = "atmel,at91sam9g45-trng";
+ reg = <0xe0048000 0x100>;
+ clocks = <&nic_clk>;
+ };
+
+ aes: crypto@e004c000 {
+ compatible = "atmel,at91sam9g46-aes";
+ reg = <0xe004c000 0x100>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(13)>,
+ <&dma0 AT91_XDMAC_DT_PERID(12)>;
+ dma-names = "rx", "tx";
+ clocks = <&nic_clk>;
+ clock-names = "aes_clk";
+ };
+
+ flx2: flexcom@e0060000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe0060000 0x100>;
+ clocks = <&clks GCK_ID_FLEXCOM2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0060000 0x800>;
+ status = "disabled";
+ };
+
+ flx3: flexcom@e0064000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe0064000 0x100>;
+ clocks = <&clks GCK_ID_FLEXCOM3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0064000 0x800>;
+ status = "disabled";
+
+ usart3: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nic_clk>;
+ clock-names = "usart";
+ atmel,fifo-size = <32>;
+ status = "disabled";
+ };
+ };
+
+ dma0: dma-controller@e0068000 {
+ compatible = "microchip,sama7g5-dma";
+ reg = <0xe0068000 0x1000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&nic_clk>;
+ clock-names = "dma_clk";
+ };
+
+ sha: crypto@e006c000 {
+ compatible = "atmel,at91sam9g46-sha";
+ reg = <0xe006c000 0xec>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
+ dma-names = "tx";
+ clocks = <&nic_clk>;
+ clock-names = "sha_clk";
+ };
+
+ flx4: flexcom@e0070000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe0070000 0x100>;
+ clocks = <&clks GCK_ID_FLEXCOM4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0070000 0x800>;
+ status = "disabled";
+ };
+
+ timer0: timer@e008c000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xe008c000 0x400>;
+ clocks = <&nic_clk>;
+ clock-names = "timer";
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ watchdog: watchdog@e0090000 {
+ compatible = "snps,dw-wdt";
+ reg = <0xe0090000 0x1000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nic_clk>;
+ status = "disabled";
+ };
+
+ can0: can@e081c000 {
+ compatible = "bosch,m_can";
+ reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&clks GCK_ID_MCAN0>;
+ assigned-clock-rates = <40000000>;
+ bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ gpio: pinctrl@e2004064 {
+ compatible = "microchip,lan966x-pinctrl";
+ reg = <0xe2004064 0xb4>,
+ <0xe2010024 0x138>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&gpio 0 0 78>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ };
+
+ gic: interrupt-controller@e8c11000 {
+ compatible = "arm,gic-400", "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ reg = <0xe8c11000 0x1000>,
+ <0xe8c12000 0x2000>,
+ <0xe8c14000 0x2000>,
+ <0xe8c16000 0x2000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
index 57bae2aa910e..cb08aa62d967 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
@@ -11,3 +11,11 @@
model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3";
};
+
+&omap3_pmx_core {
+ isp1763_pins: pinmux_isp1763_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat6.gpio_128 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 5532db04046c..07ea822fe405 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -85,3 +85,12 @@
>;
};
};
+
+/* The gpio muxing between omap3530 and dm3730 is different for GPIO_128 */
+&omap3_pmx_wkup {
+ isp1763_pins: pinmux_isp1763_pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a58, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_128 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index 533a47bc4a53..b4664ab00256 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -93,7 +93,8 @@
&gpmc {
ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
- 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
+ 1 0 0x2c000000 0x1000000 /* CS1: 16MB for LAN9221 */
+ 6 0 0x28000000 0x1000000>; /* CS6: 16MB for ISP1763 */
ethernet@gpmc {
pinctrl-names = "default";
@@ -102,6 +103,44 @@
interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
reg = <1 0 0xff>;
};
+
+ usb@6,0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&isp1763_pins>;
+ compatible = "nxp,usb-isp1763";
+ reg = <0x6 0x0 0xff>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host";
+ bus-width = <16>;
+ dr_mode = "host";
+ gpmc,mux-add-data = <0>;
+ gpmc,device-width = <2>;
+ gpmc,wait-pin = <0>;
+ gpmc,burst-length = <4>;
+ gpmc,cycle2cycle-samecsen = <1>;
+ gpmc,cycle2cycle-diffcsen = <1>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <45>;
+ gpmc,cs-wr-off-ns = <45>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <0>;
+ gpmc,adv-wr-off-ns = <0>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <45>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <25>;
+ gpmc,rd-cycle-ns = <60>;
+ gpmc,wr-cycle-ns = <45>;
+ gpmc,access-ns = <35>;
+ gpmc,page-burst-access-ns = <0>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <60>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <5>;
+ gpmc,wr-access-ns = <20>;
+ };
};
&hdqw1w {
diff --git a/arch/arm/boot/dts/mstar-infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi
index 0bee517797f4..441a917b88ba 100644
--- a/arch/arm/boot/dts/mstar-infinity.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity.dtsi
@@ -8,6 +8,40 @@
#include <dt-bindings/gpio/msc313-gpio.h>
+/ {
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-240000000 {
+ opp-hz = /bits/ 64 <240000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
&imi {
reg = <0xa0000000 0x16000>;
};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
new file mode 100644
index 000000000000..34df472fed71
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/ {
+ reg_vcc_dram: regulator-vcc-dram {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_dram";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+};
+
+&pm_uart {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
new file mode 100644
index 000000000000..f25a04c98ccb
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+
+/ {
+ model = "DongShanPi One";
+ compatible = "100ask,dongshanpione", "mstar,infinity2m";
+
+ aliases {
+ serial0 = &pm_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&pm_uart {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts
new file mode 100644
index 000000000000..1bbbf47132dc
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+
+/ {
+ model = "Miyoo Mini";
+ compatible = "miyoo,miyoo-mini", "mstar,infinity2m";
+
+ aliases {
+ serial0 = &pm_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&pm_uart {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
new file mode 100644
index 000000000000..b15c40762bc0
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Wireless Tag IDO-SBC2D06-1VB-22W";
+ compatible = "wirelesstag,ido-sbc2d06-v1b-22w", "mstar,infinity2m";
+
+ leds {
+ compatible = "gpio-leds";
+ sys_led {
+ gpios = <&gpio SSD20XD_GPIO_GPIO85 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
new file mode 100644
index 000000000000..d877aff85033
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+#include "mstar-infinity2m-ssd201-som2d01.dtsi"
+
+/ {
+ model = "Wireless Tag IDO-SOM2D01 (SSD202D)";
+ compatible = "wirelesstag,ido-som2d01", "mstar,infinity2m";
+
+ aliases {
+ serial0 = &pm_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&reg_vcc_dram {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
index 7a5e28b33f96..6f067da61ba3 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
@@ -6,6 +6,11 @@
#include "mstar-infinity2m.dtsi"
+&gpio {
+ compatible = "sstar,ssd20xd-gpio";
+ status = "okay";
+};
+
&smpctrl {
compatible = "sstar,ssd201-smpctrl", "mstar,smpctrl";
status = "okay";
diff --git a/arch/arm/boot/dts/mstar-infinity2m.dtsi b/arch/arm/boot/dts/mstar-infinity2m.dtsi
index 6d4d1d224e96..1b485efd7156 100644
--- a/arch/arm/boot/dts/mstar-infinity2m.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity2m.dtsi
@@ -6,11 +6,28 @@
#include "mstar-infinity.dtsi"
+&cpu0_opp_table {
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ };
+};
+
&cpus {
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
+ operating-points-v2 = <&cpu0_opp_table>;
reg = <0x1>;
+ clocks = <&cpupll>;
+ clock-names = "cpuclk";
};
};
diff --git a/arch/arm/boot/dts/mstar-infinity3.dtsi b/arch/arm/boot/dts/mstar-infinity3.dtsi
index 9857e2a9934d..a56cf29e5d82 100644
--- a/arch/arm/boot/dts/mstar-infinity3.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity3.dtsi
@@ -6,6 +6,64 @@
#include "mstar-infinity.dtsi"
+&cpu0_opp_table {
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ };
+
+ // overclock frequencies below, shown to work fine up to 1.3 GHz
+ opp-108000000 {
+ opp-hz = /bits/ 64 <1080000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+
+ opp-1188000000 {
+ opp-hz = /bits/ 64 <1188000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+
+ opp-1296000000 {
+ opp-hz = /bits/ 64 <1296000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+
+ opp-1350000000 {
+ opp-hz = /bits/ 64 <1350000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+
+ opp-1404000000 {
+ opp-hz = /bits/ 64 <1404000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+
+ opp-1458000000 {
+ opp-hz = /bits/ 64 <1458000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+
+ opp-1512000000 {
+ opp-hz = /bits/ 64 <1512000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+};
+
&imi {
reg = <0xa0000000 0x20000>;
};
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
index 89ebfe4f29da..c26ba9b7b6dd 100644
--- a/arch/arm/boot/dts/mstar-v7.dtsi
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -21,6 +21,8 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
+ clocks = <&cpupll>;
+ clock-names = "cpuclk";
};
};
@@ -155,6 +157,13 @@
clocks = <&xtal>;
};
+ cpupll: cpupll@206400 {
+ compatible = "mstar,msc313-cpupll";
+ reg = <0x206400 0x200>;
+ #clock-cells = <0>;
+ clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
+ };
+
gpio: gpio@207800 {
#gpio-cells = <2>;
reg = <0x207800 0x200>;
diff --git a/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts b/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts
new file mode 100644
index 000000000000..b057e037f940
--- /dev/null
+++ b/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+/dts-v1/;
+#include "mt6582.dtsi"
+
+/ {
+ model = "Prestigio PMT5008 3G";
+ compatible = "prestigio,pmt5008-3g", "mediatek,mt6582";
+
+ aliases {
+ bootargs = "console=ttyS0,921600n8 earlyprintk";
+ serial0 = &uart0;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6582.dtsi b/arch/arm/boot/dts/mt6582.dtsi
new file mode 100644
index 000000000000..4263371784cd
--- /dev/null
+++ b/arch/arm/boot/dts/mt6582.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mediatek,mt6582";
+ interrupt-parent = <&sysirq>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ };
+ };
+
+ system_clk: dummy13m {
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ #clock-cells = <0>;
+ };
+
+ rtc_clk: dummy32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
+ timer: timer@11008000 {
+ compatible = "mediatek,mt6577-timer";
+ reg = <0x10008000 0x80>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&system_clk>, <&rtc_clk>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
+ sysirq: interrupt-controller@10200100 {
+ compatible = "mediatek,mt6582-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0x10200100 0x1c>;
+ };
+
+ gic: interrupt-controller@10211000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0x10211000 0x1000>,
+ <0x10212000 0x2000>,
+ <0x10214000 0x2000>,
+ <0x10216000 0x2000>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt6582-uart",
+ "mediatek,mt6577-uart";
+ reg = <0x11002000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt6582-uart",
+ "mediatek,mt6577-uart";
+ reg = <0x11003000 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt6582-uart",
+ "mediatek,mt6577-uart";
+ reg = <0x11004000 0x400>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt6582-uart",
+ "mediatek,mt6577-uart";
+ reg = <0x11005000 0x400>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt6582-wdt",
+ "mediatek,mt6589-wdt";
+ reg = <0x10007000 0x100>;
+ };
+};
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
index 83f27fbf4e93..3ee61251a16d 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
+++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -8,6 +8,9 @@
#include "nuvoton-wpcm450.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/gpio.h>
+
/ {
model = "Supermicro X9SCi-LN4F BMC";
compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
@@ -20,6 +23,46 @@
device_type = "memory";
reg = <0 0x08000000>; /* 128 MiB */
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins>;
+
+ uid {
+ label = "UID button";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ uid {
+ label = "UID";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ heartbeat {
+ label = "heartbeat";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ key_pins: mux-keys {
+ groups = "gspi", "sspi";
+ function = "gpio";
+ };
+
+ led_pins: mux-leds {
+ groups = "hg3", "hg0", "pwm4";
+ function = "gpio";
+ };
};
&serial0 {
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
index d7cbeb187484..93595850a4c3 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
@@ -8,6 +8,17 @@
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ gpio5 = &gpio5;
+ gpio6 = &gpio6;
+ gpio7 = &gpio7;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -33,12 +44,19 @@
interrupt-parent = <&aic>;
ranges;
+ gcr: syscon@b0000000 {
+ compatible = "nuvoton,wpcm450-gcr", "syscon", "simple-mfd";
+ reg = <0xb0000000 0x200>;
+ };
+
serial0: serial@b8000000 {
compatible = "nuvoton,wpcm450-uart";
reg = <0xb8000000 0x20>;
reg-shift = <2>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk24m>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bsp_pins>;
status = "disabled";
};
@@ -72,5 +90,371 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ pinctrl: pinctrl@b8003000 {
+ compatible = "nuvoton,wpcm450-pinctrl";
+ reg = <0xb8003000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio0: gpio@0 {
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ gpio1: gpio@1 {
+ reg = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@2 {
+ reg = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio3: gpio@3 {
+ reg = <3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio4: gpio@4 {
+ reg = <4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio5: gpio@5 {
+ reg = <5>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio6: gpio@6 {
+ reg = <6>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio7: gpio@7 {
+ reg = <7>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ smb3_pins: mux-smb3 {
+ groups = "smb3";
+ function = "smb3";
+ };
+
+ smb4_pins: mux-smb4 {
+ groups = "smb4";
+ function = "smb4";
+ };
+
+ smb5_pins: mux-smb5 {
+ groups = "smb5";
+ function = "smb5";
+ };
+
+ scs1_pins: mux-scs1 {
+ groups = "scs1";
+ function = "scs1";
+ };
+
+ scs2_pins: mux-scs2 {
+ groups = "scs2";
+ function = "scs2";
+ };
+
+ scs3_pins: mux-scs3 {
+ groups = "scs3";
+ function = "scs3";
+ };
+
+ smb0_pins: mux-smb0 {
+ groups = "smb0";
+ function = "smb0";
+ };
+
+ smb1_pins: mux-smb1 {
+ groups = "smb1";
+ function = "smb1";
+ };
+
+ smb2_pins: mux-smb2 {
+ groups = "smb2";
+ function = "smb2";
+ };
+
+ bsp_pins: mux-bsp {
+ groups = "bsp";
+ function = "bsp";
+ };
+
+ hsp1_pins: mux-hsp1 {
+ groups = "hsp1";
+ function = "hsp1";
+ };
+
+ hsp2_pins: mux-hsp2 {
+ groups = "hsp2";
+ function = "hsp2";
+ };
+
+ r1err_pins: mux-r1err {
+ groups = "r1err";
+ function = "r1err";
+ };
+
+ r1md_pins: mux-r1md {
+ groups = "r1md";
+ function = "r1md";
+ };
+
+ rmii2_pins: mux-rmii2 {
+ groups = "rmii2";
+ function = "rmii2";
+ };
+
+ r2err_pins: mux-r2err {
+ groups = "r2err";
+ function = "r2err";
+ };
+
+ r2md_pins: mux-r2md {
+ groups = "r2md";
+ function = "r2md";
+ };
+
+ kbcc_pins: mux-kbcc {
+ groups = "kbcc";
+ function = "kbcc";
+ };
+
+ dvo0_pins: mux-dvo0 {
+ groups = "dvo";
+ function = "dvo0";
+ };
+
+ dvo3_pins: mux-dvo3 {
+ groups = "dvo";
+ function = "dvo3";
+ };
+
+ clko_pins: mux-clko {
+ groups = "clko";
+ function = "clko";
+ };
+
+ smi_pins: mux-smi {
+ groups = "smi";
+ function = "smi";
+ };
+
+ uinc_pins: mux-uinc {
+ groups = "uinc";
+ function = "uinc";
+ };
+
+ gspi_pins: mux-gspi {
+ groups = "gspi";
+ function = "gspi";
+ };
+
+ mben_pins: mux-mben {
+ groups = "mben";
+ function = "mben";
+ };
+
+ xcs2_pins: mux-xcs2 {
+ groups = "xcs2";
+ function = "xcs2";
+ };
+
+ xcs1_pins: mux-xcs1 {
+ groups = "xcs1";
+ function = "xcs1";
+ };
+
+ sdio_pins: mux-sdio {
+ groups = "sdio";
+ function = "sdio";
+ };
+
+ sspi_pins: mux-sspi {
+ groups = "sspi";
+ function = "sspi";
+ };
+
+ fi0_pins: mux-fi0 {
+ groups = "fi0";
+ function = "fi0";
+ };
+
+ fi1_pins: mux-fi1 {
+ groups = "fi1";
+ function = "fi1";
+ };
+
+ fi2_pins: mux-fi2 {
+ groups = "fi2";
+ function = "fi2";
+ };
+
+ fi3_pins: mux-fi3 {
+ groups = "fi3";
+ function = "fi3";
+ };
+
+ fi4_pins: mux-fi4 {
+ groups = "fi4";
+ function = "fi4";
+ };
+
+ fi5_pins: mux-fi5 {
+ groups = "fi5";
+ function = "fi5";
+ };
+
+ fi6_pins: mux-fi6 {
+ groups = "fi6";
+ function = "fi6";
+ };
+
+ fi7_pins: mux-fi7 {
+ groups = "fi7";
+ function = "fi7";
+ };
+
+ fi8_pins: mux-fi8 {
+ groups = "fi8";
+ function = "fi8";
+ };
+
+ fi9_pins: mux-fi9 {
+ groups = "fi9";
+ function = "fi9";
+ };
+
+ fi10_pins: mux-fi10 {
+ groups = "fi10";
+ function = "fi10";
+ };
+
+ fi11_pins: mux-fi11 {
+ groups = "fi11";
+ function = "fi11";
+ };
+
+ fi12_pins: mux-fi12 {
+ groups = "fi12";
+ function = "fi12";
+ };
+
+ fi13_pins: mux-fi13 {
+ groups = "fi13";
+ function = "fi13";
+ };
+
+ fi14_pins: mux-fi14 {
+ groups = "fi14";
+ function = "fi14";
+ };
+
+ fi15_pins: mux-fi15 {
+ groups = "fi15";
+ function = "fi15";
+ };
+
+ pwm0_pins: mux-pwm0 {
+ groups = "pwm0";
+ function = "pwm0";
+ };
+
+ pwm1_pins: mux-pwm1 {
+ groups = "pwm1";
+ function = "pwm1";
+ };
+
+ pwm2_pins: mux-pwm2 {
+ groups = "pwm2";
+ function = "pwm2";
+ };
+
+ pwm3_pins: mux-pwm3 {
+ groups = "pwm3";
+ function = "pwm3";
+ };
+
+ pwm4_pins: mux-pwm4 {
+ groups = "pwm4";
+ function = "pwm4";
+ };
+
+ pwm5_pins: mux-pwm5 {
+ groups = "pwm5";
+ function = "pwm5";
+ };
+
+ pwm6_pins: mux-pwm6 {
+ groups = "pwm6";
+ function = "pwm6";
+ };
+
+ pwm7_pins: mux-pwm7 {
+ groups = "pwm7";
+ function = "pwm7";
+ };
+
+ hg0_pins: mux-hg0 {
+ groups = "hg0";
+ function = "hg0";
+ };
+
+ hg1_pins: mux-hg1 {
+ groups = "hg1";
+ function = "hg1";
+ };
+
+ hg2_pins: mux-hg2 {
+ groups = "hg2";
+ function = "hg2";
+ };
+
+ hg3_pins: mux-hg3 {
+ groups = "hg3";
+ function = "hg3";
+ };
+
+ hg4_pins: mux-hg4 {
+ groups = "hg4";
+ function = "hg4";
+ };
+
+ hg5_pins: mux-hg5 {
+ groups = "hg5";
+ function = "hg5";
+ };
+
+ hg6_pins: mux-hg6 {
+ groups = "hg6";
+ function = "hg6";
+ };
+
+ hg7_pins: mux-hg7 {
+ groups = "hg7";
+ function = "hg7";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
index 31f59de5190b..7af41361c480 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
+++ b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
@@ -28,7 +28,7 @@ partitions {
label = "rofs";
};
- rwfs@6000000 {
+ rwfs@2a00000 {
reg = <0x2a00000 0x1600000>; // 22MB
label = "rwfs";
};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
index 6c26524e93e1..b47e14063c38 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout.dtsi
+++ b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
@@ -20,7 +20,7 @@ partitions {
label = "kernel";
};
- rofs@c0000 {
+ rofs@4c0000 {
reg = <0x4c0000 0x1740000>;
label = "rofs";
};
diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
index 7e2fcb220aea..c59e06ff2423 100644
--- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts
+++ b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
@@ -103,6 +103,10 @@
};
};
+&etha {
+ status = "okay";
+};
+
&uart1 {
status = "okay";
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
index 0755e5864c4a..96c0745f7b70 100644
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ b/arch/arm/boot/dts/ox810se.dtsi
@@ -81,6 +81,24 @@
ranges;
interrupt-parent = <&intc>;
+ etha: ethernet@40400000 {
+ compatible = "oxsemi,ox810se-dwmac", "snps,dwmac";
+ reg = <0x40400000 0x2000>;
+ interrupts = <8>;
+ interrupt-names = "macirq";
+ mac-address = [000000000000]; /* Filled in by U-Boot */
+ phy-mode = "rgmii";
+
+ clocks = <&stdclk 6>, <&gmacclk>;
+ clock-names = "gmac", "stmmaceth";
+ resets = <&reset 6>;
+
+ /* Regmap for sys registers */
+ oxsemi,sys-ctrl = <&sys>;
+
+ status = "disabled";
+ };
+
apb-bridge@44000000 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index f350c4e8c194..2b7e52fda6a7 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -16,11 +16,35 @@
aliases {
serial0 = &blsp1_uart3;
+ serial1 = &blsp1_uart4;
};
chosen {
stdout-path = "serial0:115200n8";
};
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_regulator_default_state>;
+ };
+};
+
+&blsp1_i2c1 {
+ status = "okay";
+
+ fuel-gauge@55 {
+ compatible = "ti,bq27421";
+ reg = <0x55>;
+ };
};
&blsp1_i2c5 {
@@ -57,14 +81,30 @@
status = "okay";
};
+&blsp1_uart4 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp1_uart4_default_state>;
+
+ bluetooth {
+ compatible = "brcm,bcm43430a0-bt";
+
+ max-speed = <3000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_default_state>;
+
+ host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&rpm_requests {
pm8226-regulators {
compatible = "qcom,rpm-pm8226-regulators";
- pm8226_s1: s1 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1275000>;
- };
pm8226_s3: s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
@@ -195,24 +235,55 @@
bus-width = <8>;
non-removable;
+};
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
+&sdhc_3 {
+ status = "okay";
+
+ max-frequency = <100000000>;
+ non-removable;
+
+ vmmc-supply = <&vreg_wlan>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_hostwake_default_state>;
+ };
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <450000>;
+ qcom,fast-charge-current-limit = <400000>;
+ qcom,fast-charge-safe-voltage = <4350000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,auto-recharge-threshold-voltage = <4240000>;
+ qcom,minimum-input-voltage = <4450000>;
};
&tlmm {
- sdhc1_pin_a: sdhc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strength = <10>;
- bias-disable;
- };
+ blsp1_uart4_default_state: blsp1-uart4-default-state {
+ pins = "gpio12", "gpio13", "gpio14", "gpio15";
+ function = "blsp_uart4";
+ drive-strength = <8>;
+ bias-disable;
+ };
- cmd-data {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
+ bluetooth_default_state: bluetooth-default-state {
+ pins = "gpio47", "gpio48";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
};
touch_pins: touch {
@@ -234,4 +305,31 @@
output-high;
};
};
+
+ wlan_hostwake_default_state: wlan-hostwake-default-state {
+ pins = "gpio37";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
+ wlan_regulator_default_state: wlan-regulator-default-state {
+ pins = "gpio46";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&usb {
+ status = "okay";
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
};
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index d664ccd454c5..138d6478ac84 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -83,7 +83,7 @@
soc {
pinctrl@800000 {
- /* eMMMC pins, all 8 data lines connected */
+ /* eMMC pins, all 8 data lines connected */
dragon_sdcc1_pins: sdcc1 {
mux {
pins = "gpio159", "gpio160", "gpio161",
@@ -674,14 +674,14 @@
bias-pull-down;
};
- /* LVS0 thru 3 and mvs0 are just switches */
+ /* LVS0 thru 3 and mvs are just switches */
lvs0 {
regulator-always-on;
};
lvs1 { };
lvs2 { };
lvs3 { };
- mvs0 {};
+ mvs { };
};
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index 9a835335bf78..ca9f73528196 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -212,13 +212,12 @@
};
};
- dsi0: mdss_dsi@4700000 {
+ dsi0: dsi@4700000 {
status = "okay";
vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
vdd-supply = <&pm8921_l8>;
vddio-supply = <&pm8921_lvs7>;
avdd-supply = <&pm8921_l11>;
- vcss-supply = <&ext_3p3v>;
panel@0 {
reg = <0>;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 4d562c94c31c..a1c8ae516d21 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -815,6 +815,7 @@
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
nvmem-cell-names = "calib", "calib_backup";
#clock-cells = <1>;
+ #power-domain-cells = <1>;
#reset-cells = <1>;
#thermal-sensor-cells = <1>;
};
@@ -830,11 +831,12 @@
compatible = "qcom,mmcc-apq8064";
reg = <0x4000000 0x1000>;
#clock-cells = <1>;
+ #power-domain-cells = <1>;
#reset-cells = <1>;
};
l2cc: clock-controller@2011000 {
- compatible = "syscon";
+ compatible = "qcom,kpss-gcc", "syscon";
reg = <0x2011000 0x1000>;
};
@@ -1238,7 +1240,7 @@
reg = <0x5700000 0x70>;
};
- dsi0: mdss_dsi@4700000 {
+ dsi0: dsi@4700000 {
compatible = "qcom,mdss-dsi-ctrl";
label = "MDSS DSI CTRL->0";
#address-cells = <1>;
@@ -1268,6 +1270,7 @@
<&dsi0_phy 1>;
syscon-sfpb = <&mmss_sfpb>;
phys = <&dsi0_phy>;
+ phy-names = "dsi";
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1368,10 +1371,10 @@
pcie: pci@1b500000 {
compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
- reg = <0x1b500000 0x1000
- 0x1b502000 0x80
- 0x1b600000 0x100
- 0x0ff00000 0x100000>;
+ reg = <0x1b500000 0x1000>,
+ <0x1b502000 0x80>,
+ <0x1b600000 0x100>,
+ <0x0ff00000 0x100000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
linux,pci-domain = <0>;
@@ -1379,8 +1382,8 @@
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
- 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */
+ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>, /* I/O */
+ <0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* mem */
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 7dec0553636e..a9d0566a3190 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -142,7 +142,8 @@
clocks {
sleep_clk: sleep_clk {
compatible = "fixed-clock";
- clock-frequency = <32768>;
+ clock-frequency = <32000>;
+ clock-output-names = "gcc_sleep_clk_src";
#clock-cells = <0>;
};
@@ -186,6 +187,7 @@
gcc: clock-controller@1800000 {
compatible = "qcom,gcc-ipq4019";
#clock-cells = <1>;
+ #power-domain-cells = <1>;
#reset-cells = <1>;
reg = <0x1800000 0x60000>;
};
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index c32415f0e66d..4d4f37cebf21 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -139,6 +139,7 @@
gcc: clock-controller@900000 {
compatible = "qcom,gcc-mdm9615";
#clock-cells = <1>;
+ #power-domain-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
@@ -151,7 +152,7 @@
};
l2cc: clock-controller@2011000 {
- compatible = "syscon";
+ compatible = "qcom,kpss-gcc", "syscon";
reg = <0x02011000 0x1000>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index 7d48599502b3..85e56992d2d0 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/qcom,gcc-msm8974.h>
/ {
#address-cells = <1>;
@@ -72,6 +73,35 @@
rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8226";
qcom,smd-channels = "rpm_requests";
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8226-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <1>;
+ };
+ rpmpd_opp_svs_krait: opp2 {
+ opp-level = <2>;
+ };
+ rpmpd_opp_svs_soc: opp3 {
+ opp-level = <3>;
+ };
+ rpmpd_opp_nom: opp4 {
+ opp-level = <4>;
+ };
+ rpmpd_opp_turbo: opp5 {
+ opp-level = <5>;
+ };
+ rpmpd_opp_super_turbo: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
};
};
};
@@ -115,6 +145,8 @@
<&gcc GCC_SDCC1_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_default_state>;
status = "disabled";
};
@@ -129,6 +161,8 @@
<&gcc GCC_SDCC2_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc2_default_state>;
status = "disabled";
};
@@ -143,6 +177,8 @@
<&gcc GCC_SDCC3_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc3_default_state>;
status = "disabled";
};
@@ -229,6 +265,44 @@
#size-cells = <0>;
};
+ usb: usb@f9a55000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0xf9a55000 0x200>,
+ <0xf9a55200 0x200>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+ <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ clock-names = "iface", "core";
+ assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ assigned-clock-rates = <75000000>;
+ resets = <&gcc GCC_USB_HS_BCR>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ ahb-burst-config = <0>;
+ phy-names = "usb-phy";
+ phys = <&usb_hs_phy>;
+ status = "disabled";
+ #reset-cells = <1>;
+
+ ulpi {
+ usb_hs_phy: phy {
+ compatible = "qcom,usb-hs-phy-msm8226",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "ref", "sleep";
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+ reset-names = "phy", "por";
+ qcom,init-seq = /bits/ 8 <0x0 0x44
+ 0x1 0x68 0x2 0x24 0x3 0x13>;
+ };
+ };
+ };
+
gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8226";
reg = <0xfc400000 0x4000>;
@@ -281,6 +355,57 @@
drive-strength = <2>;
bias-disable;
};
+
+ sdhc1_default_state: sdhc1-default-state {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc2_default_state: sdhc2-default-state {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc3_default_state: sdhc3-default-state {
+ clk {
+ pins = "gpio44";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "gpio43";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "gpio39", "gpio40", "gpio41", "gpio42";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
};
restart@fc4ab000 {
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 1e8aab357f9c..a258abb23a64 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -126,6 +126,7 @@
gcc: clock-controller@900000 {
compatible = "qcom,gcc-msm8660";
#clock-cells = <1>;
+ #power-domain-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
@@ -390,7 +391,7 @@
};
l2cc: clock-controller@2082000 {
- compatible = "syscon";
+ compatible = "qcom,kpss-gcc", "syscon";
reg = <0x02082000 0x1000>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 4af01039c3b2..d1fd0fe12ffe 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -279,7 +279,7 @@
pinctrl-0 = <&spi1_default>;
spi@16080000 {
status = "okay";
- eth@0 {
+ ethernet@0 {
compatible = "micrel,ks8851";
reg = <0>;
interrupt-parent = <&msmgpio>;
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 2a0ec97a264f..4a2d74cf01d2 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -78,6 +78,15 @@
};
};
+ /* Temporary fixed regulator */
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -118,6 +127,7 @@
gcc: clock-controller@900000 {
compatible = "qcom,gcc-msm8960";
#clock-cells = <1>;
+ #power-domain-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
@@ -133,11 +143,12 @@
compatible = "qcom,mmcc-msm8960";
reg = <0x4000000 0x1000>;
#clock-cells = <1>;
+ #power-domain-cells = <1>;
#reset-cells = <1>;
};
l2cc: clock-controller@2011000 {
- compatible = "syscon";
+ compatible = "qcom,kpss-gcc", "syscon";
reg = <0x2011000 0x1000>;
};
@@ -146,7 +157,9 @@
reg = <0x108000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
- interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
regulators {
@@ -192,7 +205,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
<0x16400000 0x1000>;
- interrupts = <0 154 0x0>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -249,15 +262,6 @@
clock-names = "core";
};
- /* Temporary fixed regulator */
- vsdcc_fixed: vsdcc-regulator {
- compatible = "regulator-fixed";
- regulator-name = "SDCC Power";
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- regulator-always-on;
- };
-
amba {
compatible = "simple-bus";
#address-cells = <1>;
@@ -318,7 +322,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x16080000 0x1000>;
- interrupts = <0 147 0>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <24000000>;
cs-gpios = <&msmgpio 8 0>;
diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi
index dddb5150dfd7..b3d0f7b5874d 100644
--- a/arch/arm/boot/dts/qcom-pm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
@@ -16,6 +16,39 @@
debounce = <15625>;
bias-pull-up;
};
+
+ smbb: charger@1000 {
+ compatible = "qcom,pm8226-charger";
+ reg = <0x1000>;
+ interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "chg-done",
+ "chg-fast",
+ "chg-trkl",
+ "bat-temp-ok",
+ "bat-present",
+ "chg-gone",
+ "usb-valid",
+ "dc-valid";
+
+ chg_otg: otg-vbus { };
+ };
+
+ pm8226_mpps: mpps@a000 {
+ compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
+ reg = <0xa000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8226_mpps 0 0 8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
pm8226_1: pm8226@1 {
@@ -23,5 +56,15 @@
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm8226_spmi_regulators: pm8226-regulators {
+ compatible = "qcom,pm8226-regulators";
+ };
+
+ pm8226_vib: vibrator@c000 {
+ compatible = "qcom,pm8916-vib";
+ reg = <0xc000>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 8ac0492c7659..d455795da44c 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -413,7 +413,7 @@
<0x40000000 0xf1d>,
<0x40000f20 0xc8>,
<0x40001000 0x1000>,
- <0x40002000 0x10000>,
+ <0x40200000 0x100000>,
<0x01c03000 0x3000>;
reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
"mmio";
@@ -536,7 +536,7 @@
reg = <0x0c264000 0x1000>;
};
- spmi_bus: qcom,spmi@c440000 {
+ spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0c440000 0x0000d00>,
<0x0c600000 0x2000000>,
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index a01f3def1c69..0af63ddc4473 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -266,7 +266,7 @@
function = "lcd0";
};
- lcd0_mux {
+ lcd0-mux-hog {
/* DBGMD/LCDC0/FSIA MUX */
gpio-hog;
gpios = <176 0>;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 3c8a7c8b1fdd..4e58c54cde17 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -91,10 +91,10 @@
&gpio0 {
/* Disable hogging GP0_18 to output LOW */
- /delete-node/ qspi_en;
+ /delete-node/ qspi-en-hog;
/* Hog GP0_18 to output HIGH to enable VIN2 */
- vin2_en {
+ vin2-en-hog {
gpio-hog;
gpios = <18 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index a5a79cdbcd0e..64102b664055 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -226,7 +226,7 @@
};
&gpio0 {
- touch-interrupt {
+ touch-interrupt-hog {
gpio-hog;
gpios = <24 GPIO_ACTIVE_LOW>;
input;
@@ -234,7 +234,7 @@
};
&gpio1 {
- can-trx-en-gpio{
+ can-trx-en-hog {
gpio-hog;
gpios = <28 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
index 5621c9ed698f..b281a4d164b0 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
@@ -37,7 +37,7 @@
&gpio0 {
/* GP0_18 set low to select QSPI. Doing so will disable VIN2 */
- qspi_en {
+ qspi-en-hog {
gpio-hog;
gpios = <18 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index b024621c9981..644802285249 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -116,7 +116,7 @@
};
&gpio2 {
- interrupt-fixup {
+ interrupt-fixup-hog {
gpio-hog;
gpios = <29 GPIO_ACTIVE_HIGH>;
line-name = "hdmi-hpd-int";
diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
index 4e57ae2688fc..3f8f3ce87e12 100644
--- a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
+++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
@@ -26,3 +26,8 @@
&uart0 {
status = "okay";
};
+
+&wdt0 {
+ timeout-sec = <60>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index c47896e4ab58..636a6ab31c58 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -66,6 +66,22 @@
interrupt-parent = <&gic>;
ranges;
+ wdt0: watchdog@40008000 {
+ compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt";
+ reg = <0x40008000 0x1000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>;
+ status = "disabled";
+ };
+
+ wdt1: watchdog@40009000 {
+ compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt";
+ reg = <0x40009000 0x1000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>;
+ status = "disabled";
+ };
+
sysctrl: system-controller@4000c000 {
compatible = "renesas,r9a06g032-sysctrl";
reg = <0x4000c000 0x1000>;
@@ -173,6 +189,17 @@
status = "okay";
};
+ nand_controller: nand-controller@40102000 {
+ compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc";
+ reg = <0x40102000 0x2000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>;
+ clock-names = "hclk", "eclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@44101000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic";
interrupt-controller;
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index 39c60426c9c9..fc478ac4e781 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -212,7 +212,7 @@
regulator-name = "wl_18";
};
- lcd_33: SWITCH_REG1 {
+ lcd_33: SWITCH_REG {
regulator-name = "lcd_33";
};
};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 45a9d9b908d2..26b9bbe310af 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -980,7 +980,6 @@
clock-names = "aclk", "hclk", "sclk", "apb_pclk";
resets = <&cru SRST_CRYPTO>;
reset-names = "crypto-rst";
- status = "okay";
};
iep_mmu: iommu@ff900800 {
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
index f62c9f7af79d..0c99a5934ebf 100644
--- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -72,6 +72,7 @@
interrupt-parent = <&gpio0>;
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
rockchip,system-power-controller;
+ #clock-cells = <0>;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index fe5fc9bf75c9..46cad7cb94bf 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -85,6 +85,7 @@
interrupt-parent = <&gpio0>;
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
rockchip,system-power-controller;
+ #clock-cells = <0>;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
index 92439ee5d7de..20a7d72827c2 100644
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
@@ -12,66 +12,66 @@
* Pin banks
*/
- gpa: gpa {
+ gpa: gpa-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpb: gpb {
+ gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpc: gpc {
+ gpc: gpc-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpd: gpd {
+ gpd: gpd-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpe: gpe {
+ gpe: gpe-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpf: gpf {
+ gpf: gpf-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpg: gpg {
+ gpg: gpg-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gph: gph {
+ gph: gph-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpj: gpj {
+ gpj: gpj-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpk: gpk {
+ gpk: gpk-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpl: gpl {
+ gpl: gpl-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpm: gpm {
+ gpm: gpm-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
@@ -80,92 +80,92 @@
* Pin groups
*/
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gph-0", "gph-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gph-8", "gph-9";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gph-2", "gph-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gph-10", "gph-11";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gph-4", "gph-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gph-6", "gph-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gph-6", "gph-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- extuart_clk: extuart-clk {
+ extuart_clk: extuart-clk-pins {
samsung,pins = "gph-12";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpe-14", "gpe-15";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpe-11", "gpe-12", "gpe-13";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpe-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpe-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd0_bus1: sd0-bus1 {
+ sd0_bus1: sd0-bus1-pins {
samsung,pins = "gpe-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd0_bus4: sd0-bus4 {
+ sd0_bus4: sd0-bus4-pins {
samsung,pins = "gpe-8", "gpe-9", "gpe-10";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpl-8";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpl-9";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd1_bus1: sd1-bus1 {
+ sd1_bus1: sd1-bus1-pins {
samsung,pins = "gpl-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd1_bus4: sd1-bus4 {
+ sd1_bus4: sd1-bus4-pins {
samsung,pins = "gpl-1", "gpl-2", "gpl-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 285555b9ed94..17097da36f5e 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -193,12 +193,12 @@
};
&pinctrl0 {
- gpio_leds: gpio-leds {
+ gpio_leds: gpio-leds-pins {
samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- gpio_keys: gpio-keys {
+ gpio_keys: gpio-keys-pins {
samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
"gpn-4", "gpn-5", "gpl-11", "gpl-12";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index 8e9594d64b57..0a3186d57cb5 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -16,111 +16,111 @@
* Pin banks
*/
- gpa: gpa {
+ gpa: gpa-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpb: gpb {
+ gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpc: gpc {
+ gpc: gpc-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpd: gpd {
+ gpd: gpd-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpe: gpe {
+ gpe: gpe-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpf: gpf {
+ gpf: gpf-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpg: gpg {
+ gpg: gpg-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gph: gph {
+ gph: gph-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpi: gpi {
+ gpi: gpi-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpj: gpj {
+ gpj: gpj-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpk: gpk {
+ gpk: gpk-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpl: gpl {
+ gpl: gpl-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpm: gpm {
+ gpm: gpm-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpn: gpn {
+ gpn: gpn-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpo: gpo {
+ gpo: gpo-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpp: gpp {
+ gpp: gpp-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpq: gpq {
+ gpq: gpq-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -131,225 +131,225 @@
* Pin groups
*/
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa-0", "gpa-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa-2", "gpa-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa-4", "gpa-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa-6", "gpa-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- ext_dma_0: ext-dma-0 {
+ ext_dma_0: ext-dma-0-pins {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- ext_dma_1: ext-dma-1 {
+ ext_dma_1: ext-dma-1-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- irda_data_0: irda-data-0 {
+ irda_data_0: irda-data-0-pins {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- irda_data_1: irda-data-1 {
+ irda_data_1: irda-data-1-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- irda_sdbw: irda-sdbw {
+ irda_sdbw: irda-sdbw-pins {
samsung,pins = "gpb-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpb-5", "gpb-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
/* S3C6410-only */
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpc-0", "gpc-1", "gpc-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
- spi0_cs: spi0-cs {
+ spi0_cs: spi0-cs-pins {
samsung,pins = "gpc-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpc-4", "gpc-5", "gpc-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
- spi1_cs: spi1-cs {
+ spi1_cs: spi1-cs-pins {
samsung,pins = "gpc-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpg-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpg-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd0_bus1: sd0-bus1 {
+ sd0_bus1: sd0-bus1-pins {
samsung,pins = "gpg-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd0_bus4: sd0-bus4 {
+ sd0_bus4: sd0-bus4-pins {
samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpg-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gph-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gph-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd1_bus1: sd1-bus1 {
+ sd1_bus1: sd1-bus1-pins {
samsung,pins = "gph-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd1_bus4: sd1-bus4 {
+ sd1_bus4: sd1-bus4-pins {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd1_bus8: sd1-bus8 {
+ sd1_bus8: sd1-bus8-pins {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
"gph-6", "gph-7", "gph-8", "gph-9";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpg-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpc-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd2_bus1: sd2-bus1 {
+ sd2_bus1: sd2-bus1-pins {
samsung,pins = "gph-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd2_bus4: sd2-bus4 {
+ sd2_bus4: sd2-bus4-pins {
samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2s0_cdclk: i2s0-cdclk {
+ i2s0_cdclk: i2s0-cdclk-pins {
samsung,pins = "gpd-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2s1_cdclk: i2s1-cdclk {
+ i2s1_cdclk: i2s1-cdclk-pins {
samsung,pins = "gpe-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
/* S3C6410-only */
samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
"gph-8", "gph-9";
@@ -357,50 +357,50 @@
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2s2_cdclk: i2s2-cdclk {
+ i2s2_cdclk: i2s2-cdclk-pins {
/* S3C6410-only */
samsung,pins = "gph-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pcm0_bus: pcm0-bus {
+ pcm0_bus: pcm0-bus-pins {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pcm0_extclk: pcm0-extclk {
+ pcm0_extclk: pcm0-extclk-pins {
samsung,pins = "gpd-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pcm1_extclk: pcm1-extclk {
+ pcm1_extclk: pcm1-extclk-pins {
samsung,pins = "gpe-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- ac97_bus_0: ac97-bus-0 {
+ ac97_bus_0: ac97-bus-0-pins {
samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- ac97_bus_1: ac97-bus-1 {
+ ac97_bus_1: ac97-bus-1-pins {
samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- cam_port: cam-port {
+ cam_port: cam-port-pins {
samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
"gpf-5", "gpf-6", "gpf-7", "gpf-8",
"gpf-9", "gpf-10", "gpf-11", "gpf-12";
@@ -408,242 +408,242 @@
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- cam_rst: cam-rst {
+ cam_rst: cam-rst-pins {
samsung,pins = "gpf-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- cam_field: cam-field {
+ cam_field: cam-field-pins {
/* S3C6410-only */
samsung,pins = "gpb-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pwm_extclk: pwm-extclk {
+ pwm_extclk: pwm-extclk-pins {
samsung,pins = "gpf-13";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpf-14";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpf-15";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- clkout0: clkout-0 {
+ clkout0: clkout-0-pins {
samsung,pins = "gpf-14";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col0_0: keypad-col0-0 {
+ keypad_col0_0: keypad-col0-0-pins {
samsung,pins = "gph-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col1_0: keypad-col1-0 {
+ keypad_col1_0: keypad-col1-0-pins {
samsung,pins = "gph-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col2_0: keypad-col2-0 {
+ keypad_col2_0: keypad-col2-0-pins {
samsung,pins = "gph-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col3_0: keypad-col3-0 {
+ keypad_col3_0: keypad-col3-0-pins {
samsung,pins = "gph-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col4_0: keypad-col4-0 {
+ keypad_col4_0: keypad-col4-0-pins {
samsung,pins = "gph-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col5_0: keypad-col5-0 {
+ keypad_col5_0: keypad-col5-0-pins {
samsung,pins = "gph-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col6_0: keypad-col6-0 {
+ keypad_col6_0: keypad-col6-0-pins {
samsung,pins = "gph-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col7_0: keypad-col7-0 {
+ keypad_col7_0: keypad-col7-0-pins {
samsung,pins = "gph-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col0_1: keypad-col0-1 {
+ keypad_col0_1: keypad-col0-1-pins {
samsung,pins = "gpl-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col1_1: keypad-col1-1 {
+ keypad_col1_1: keypad-col1-1-pins {
samsung,pins = "gpl-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col2_1: keypad-col2-1 {
+ keypad_col2_1: keypad-col2-1-pins {
samsung,pins = "gpl-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col3_1: keypad-col3-1 {
+ keypad_col3_1: keypad-col3-1-pins {
samsung,pins = "gpl-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col4_1: keypad-col4-1 {
+ keypad_col4_1: keypad-col4-1-pins {
samsung,pins = "gpl-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col5_1: keypad-col5-1 {
+ keypad_col5_1: keypad-col5-1-pins {
samsung,pins = "gpl-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col6_1: keypad-col6-1 {
+ keypad_col6_1: keypad-col6-1-pins {
samsung,pins = "gpl-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col7_1: keypad-col7-1 {
+ keypad_col7_1: keypad-col7-1-pins {
samsung,pins = "gpl-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row0_0: keypad-row0-0 {
+ keypad_row0_0: keypad-row0-0-pins {
samsung,pins = "gpk-8";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row1_0: keypad-row1-0 {
+ keypad_row1_0: keypad-row1-0-pins {
samsung,pins = "gpk-9";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row2_0: keypad-row2-0 {
+ keypad_row2_0: keypad-row2-0-pins {
samsung,pins = "gpk-10";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row3_0: keypad-row3-0 {
+ keypad_row3_0: keypad-row3-0-pins {
samsung,pins = "gpk-11";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row4_0: keypad-row4-0 {
+ keypad_row4_0: keypad-row4-0-pins {
samsung,pins = "gpk-12";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row5_0: keypad-row5-0 {
+ keypad_row5_0: keypad-row5-0-pins {
samsung,pins = "gpk-13";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row6_0: keypad-row6-0 {
+ keypad_row6_0: keypad-row6-0-pins {
samsung,pins = "gpk-14";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row7_0: keypad-row7-0 {
+ keypad_row7_0: keypad-row7-0-pins {
samsung,pins = "gpk-15";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row0_1: keypad-row0-1 {
+ keypad_row0_1: keypad-row0-1-pins {
samsung,pins = "gpn-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row1_1: keypad-row1-1 {
+ keypad_row1_1: keypad-row1-1-pins {
samsung,pins = "gpn-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row2_1: keypad-row2-1 {
+ keypad_row2_1: keypad-row2-1-pins {
samsung,pins = "gpn-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row3_1: keypad-row3-1 {
+ keypad_row3_1: keypad-row3-1-pins {
samsung,pins = "gpn-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row4_1: keypad-row4-1 {
+ keypad_row4_1: keypad-row4-1-pins {
samsung,pins = "gpn-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row5_1: keypad-row5-1 {
+ keypad_row5_1: keypad-row5-1-pins {
samsung,pins = "gpn-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row6_1: keypad-row6-1 {
+ keypad_row6_1: keypad-row6-1-pins {
samsung,pins = "gpn-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row7_1: keypad-row7-1 {
+ keypad_row7_1: keypad-row7-1-pins {
samsung,pins = "gpn-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- lcd_ctrl: lcd-ctrl {
+ lcd_ctrl: lcd-ctrl-pins {
samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- lcd_data16: lcd-data-width16 {
+ lcd_data16: lcd-data-width16-pins {
samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
"gpi-7", "gpi-10", "gpi-11", "gpi-12",
"gpi-13", "gpi-14", "gpi-15", "gpj-3",
@@ -652,7 +652,7 @@
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- lcd_data18: lcd-data-width18 {
+ lcd_data18: lcd-data-width18-pins {
samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
"gpi-6", "gpi-7", "gpi-10", "gpi-11",
"gpi-12", "gpi-13", "gpi-14", "gpi-15",
@@ -662,7 +662,7 @@
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- lcd_data24: lcd-data-width24 {
+ lcd_data24: lcd-data-width24-pins {
samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
"gpi-4", "gpi-5", "gpi-6", "gpi-7",
"gpi-8", "gpi-9", "gpi-10", "gpi-11",
@@ -673,7 +673,7 @@
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- hsi_bus: hsi-bus {
+ hsi_bus: hsi-bus-pins {
samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
"gpk-4", "gpk-5", "gpk-6", "gpk-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index cb11a87dbc42..67a7a66e11d5 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -178,20 +178,12 @@
interrupt-parent = <&vic1>;
interrupts = <21>;
- pctrl_int_map: pinctrl-interrupt-map {
- interrupt-map = <0 &vic0 0>,
- <1 &vic0 1>,
- <2 &vic1 0>,
- <3 &vic1 1>;
- #address-cells = <0>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- };
-
wakeup-interrupt-controller {
compatible = "samsung,s3c64xx-wakeup-eint";
- interrupts = <0>, <1>, <2>, <3>;
- interrupt-parent = <&pctrl_int_map>;
+ interrupts-extended = <&vic0 0>,
+ <&vic0 1>,
+ <&vic1 0>,
+ <&vic1 1>;
};
};
};
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index 6423348034b6..54de3bc77c30 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -391,7 +391,7 @@
};
&pinctrl0 {
- t_flash_detect: t-flash-detect {
+ t_flash_detect: t-flash-detect-pins {
samsung,pins = "gph3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 160f8cd9a68d..c8f1c324a6c2 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -645,21 +645,21 @@
};
&pinctrl0 {
- bt_reset: bt-reset {
+ bt_reset: bt-reset-pins {
samsung,pins = "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- wlan_bt_en: wlan-bt-en {
+ wlan_bt_en: wlan-bt-en-pins {
samsung,pins = "gpb-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-val = <1>;
};
- codec_ldo: codec-ldo {
+ codec_ldo: codec-ldo-pins {
samsung,pins = "gpf3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
@@ -671,19 +671,19 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- wlan_gpio_rst: wlan-gpio-rst {
+ wlan_gpio_rst: wlan-gpio-rst-pins {
samsung,pins = "gpg1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- bt_wake: bt-wake {
+ bt_wake: bt-wake-pins {
samsung,pins = "gpg3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- gp2a_irq: gp2a-irq {
+ gp2a_irq: gp2a-irq-pins {
samsung,pins = "gph0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
@@ -698,67 +698,67 @@
samsung,pin-val = <0>;
};
- pmic_irq: pmic-irq {
+ pmic_irq: pmic-irq-pins {
samsung,pins = "gph0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- wifi_host_wake: wifi-host-wake {
+ wifi_host_wake: wifi-host-wake-pins {
samsung,pins = "gph2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- bt_host_wake: bt-host-wake {
+ bt_host_wake: bt-host-wake-pins {
samsung,pins = "gph2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- musb_irq: musq-irq {
+ musb_irq: musq-irq-pins {
samsung,pins = "gph2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- tf_detect: tf-detect {
+ tf_detect: tf-detect-pins {
samsung,pins = "gph3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- wifi_wake: wifi-wake {
+ wifi_wake: wifi-wake-pins {
samsung,pins = "gph3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- magnetometer_i2c_pins: yas529-i2c-pins {
+ magnetometer_i2c_pins: yas529-i2c-pins-pins {
samsung,pins = "gpj0-0", "gpj0-1";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ts_irq: ts-irq {
+ ts_irq: ts-irq-pins {
samsung,pins = "gpj0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- vibrator_ena: vibrator-ena {
+ vibrator_ena: vibrator-ena-pins {
samsung,pins = "gpj1-1";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- gp2a_power: gp2a-power {
+ gp2a_power: gp2a-power-pins {
samsung,pins = "gpj1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
@@ -771,7 +771,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- touchkey_vdd_ena: touchkey-vdd-ena {
+ touchkey_vdd_ena: touchkey-vdd-ena-pins {
samsung,pins = "gpj3-2";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
@@ -789,13 +789,13 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pmic_i2c_pins: pmic-i2c-pins {
+ pmic_i2c_pins: pmic-i2c-pins-pins {
samsung,pins = "gpj4-0", "gpj4-3";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- touchkey_irq: touchkey-irq {
+ touchkey_irq: touchkey-irq-pins {
samsung,pins = "gpj4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
@@ -820,7 +820,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- panel_rst: panel-rst {
+ panel_rst: panel-rst-pins {
samsung,pins = "mp05-5";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index 7427c84f1126..dfb2ee65e4a8 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -126,39 +126,39 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep_cfg>;
- headset_det: headset-det {
+ headset_det: headset-det-pins {
samsung,pins = "gph0-6", "gph3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- fg_irq: fg-irq {
+ fg_irq: fg-irq-pins {
samsung,pins = "gph3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- headset_micbias_ena: headset-micbias-ena {
+ headset_micbias_ena: headset-micbias-ena-pins {
samsung,pins = "gpj2-5";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- earpath_sel: earpath-sel {
+ earpath_sel: earpath-sel-pins {
samsung,pins = "gpj2-6";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- main_micbias_ena: main-micbias-ena {
+ main_micbias_ena: main-micbias-ena-pins {
samsung,pins = "gpj4-2";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
/* Based on vendor kernel v2.6.35.7 */
- sleep_cfg: sleep-cfg {
+ sleep_cfg: sleep-state {
PIN_SLP(gpa0-0, PREV, NONE);
PIN_SLP(gpa0-1, PREV, NONE);
PIN_SLP(gpa0-2, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
index eeec2bdece11..a78caaa1f3c5 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -150,53 +150,53 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep_cfg>;
- fm_i2c_pins: fm-i2c-pins {
+ fm_i2c_pins: fm-i2c-pins-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- headset_det: headset-det {
+ headset_det: headset-det-pins {
samsung,pins = "gph0-6", "gph3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- fm_irq: fm-irq {
+ fm_irq: fm-irq-pins {
samsung,pins = "gpj2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fm_rst: fm-rst {
+ fm_rst: fm-rst-pins {
samsung,pins = "gpj2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- earpath_sel: earpath-sel {
+ earpath_sel: earpath-sel-pins {
samsung,pins = "gpj2-6";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- massmemory_en: massmemory-en {
+ massmemory_en: massmemory-en-pins {
samsung,pins = "gpj2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- micbias_reg_ena: micbias-reg-ena {
+ micbias_reg_ena: micbias-reg-ena-pins {
samsung,pins = "gpj4-2";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
/* Based on CyanogenMod 3.0.101 kernel */
- sleep_cfg: sleep-cfg {
+ sleep_cfg: sleep-state {
PIN_SLP(gpa0-0, PREV, NONE);
PIN_SLP(gpa0-1, PREV, NONE);
PIN_SLP(gpa0-2, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index b8c5172c31dd..ae34e7e57892 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -26,7 +26,7 @@
}
&pinctrl0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -34,7 +34,7 @@
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -42,7 +42,7 @@
#interrupt-cells = <2>;
};
- gpb: gpb {
+ gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -50,7 +50,7 @@
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -58,7 +58,7 @@
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -66,7 +66,7 @@
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -74,7 +74,7 @@
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -82,7 +82,7 @@
#interrupt-cells = <2>;
};
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -90,7 +90,7 @@
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -98,7 +98,7 @@
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -106,7 +106,7 @@
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -114,7 +114,7 @@
#interrupt-cells = <2>;
};
- gpf2: gpf2 {
+ gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -122,7 +122,7 @@
#interrupt-cells = <2>;
};
- gpf3: gpf3 {
+ gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -130,7 +130,7 @@
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -138,7 +138,7 @@
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -146,7 +146,7 @@
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -154,7 +154,7 @@
#interrupt-cells = <2>;
};
- gpg3: gpg3 {
+ gpg3: gpg3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -162,7 +162,7 @@
#interrupt-cells = <2>;
};
- gpj0: gpj0 {
+ gpj0: gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -170,7 +170,7 @@
#interrupt-cells = <2>;
};
- gpj1: gpj1 {
+ gpj1: gpj1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -178,7 +178,7 @@
#interrupt-cells = <2>;
};
- gpj2: gpj2 {
+ gpj2: gpj2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -186,7 +186,7 @@
#interrupt-cells = <2>;
};
- gpj3: gpj3 {
+ gpj3: gpj3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -194,7 +194,7 @@
#interrupt-cells = <2>;
};
- gpj4: gpj4 {
+ gpj4: gpj4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -202,47 +202,47 @@
#interrupt-cells = <2>;
};
- gpi: gpi {
+ gpi: gpi-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp01: mp01 {
+ mp01: mp01-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp02: mp02 {
+ mp02: mp02-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp03: mp03 {
+ mp03: mp03-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp04: mp04 {
+ mp04: mp04-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp05: mp05 {
+ mp05: mp05-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp06: mp06 {
+ mp06: mp06-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp07: mp07 {
+ mp07: mp07-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gph0: gph0 {
+ gph0: gph0-gpio-bank {
gpio-controller;
interrupt-controller;
interrupt-parent = <&vic0>;
@@ -252,7 +252,7 @@
#interrupt-cells = <2>;
};
- gph1: gph1 {
+ gph1: gph1-gpio-bank {
gpio-controller;
interrupt-controller;
interrupt-parent = <&vic0>;
@@ -262,7 +262,7 @@
#interrupt-cells = <2>;
};
- gph2: gph2 {
+ gph2: gph2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -270,7 +270,7 @@
#interrupt-cells = <2>;
};
- gph3: gph3 {
+ gph3: gph3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -278,77 +278,77 @@
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart_audio: uart-audio {
+ uart_audio: uart-audio-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
"gpi-4", "gpi-5", "gpi-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -356,7 +356,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -364,7 +364,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -372,7 +372,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -380,7 +380,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ac97_bus: ac97-bus {
+ ac97_bus: ac97-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -388,7 +388,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -396,7 +396,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm2_bus: pcm2-bus {
+ pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -404,371 +404,371 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spdif_bus: spdif-bus {
+ spdif_bus: spdif-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpd1-4", "gpd1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpd0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row0: keypad-row-0 {
+ keypad_row0: keypad-row-0-pins {
samsung,pins = "gph3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row1: keypad-row-1 {
+ keypad_row1: keypad-row-1-pins {
samsung,pins = "gph3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row2: keypad-row-2 {
+ keypad_row2: keypad-row-2-pins {
samsung,pins = "gph3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row3: keypad-row-3 {
+ keypad_row3: keypad-row-3-pins {
samsung,pins = "gph3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row4: keypad-row-4 {
+ keypad_row4: keypad-row-4-pins {
samsung,pins = "gph3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row5: keypad-row-5 {
+ keypad_row5: keypad-row-5-pins {
samsung,pins = "gph3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row6: keypad-row-6 {
+ keypad_row6: keypad-row-6-pins {
samsung,pins = "gph3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row7: keypad-row-7 {
+ keypad_row7: keypad-row-7-pins {
samsung,pins = "gph3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col0: keypad-col-0 {
+ keypad_col0: keypad-col-0-pins {
samsung,pins = "gph2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col1: keypad-col-1 {
+ keypad_col1: keypad-col-1-pins {
samsung,pins = "gph2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col2: keypad-col-2 {
+ keypad_col2: keypad-col-2-pins {
samsung,pins = "gph2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col3: keypad-col-3 {
+ keypad_col3: keypad-col-3-pins {
samsung,pins = "gph2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col4: keypad-col-4 {
+ keypad_col4: keypad-col-4-pins {
samsung,pins = "gph2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col5: keypad-col-5 {
+ keypad_col5: keypad-col-5-pins {
samsung,pins = "gph2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col6: keypad-col-6 {
+ keypad_col6: keypad-col-6-pins {
samsung,pins = "gph2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col7: keypad-col-7 {
+ keypad_col7: keypad-col-7-pins {
samsung,pins = "gph2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpg0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpg0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpg0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpg0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpg1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpg1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpg1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpg1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpg2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpg2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpg2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpg2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus8: sd2-bus-width8 {
+ sd2_bus8: sd2-bus-width8-pins {
samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_clk: sd3-clk {
+ sd3_clk: sd3-clk-pins {
samsung,pins = "gpg3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cmd: sd3-cmd {
+ sd3_cmd: sd3-cmd-pins {
samsung,pins = "gpg3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cd: sd3-cd {
+ sd3_cd: sd3-cd-pins {
samsung,pins = "gpg3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus1: sd3-bus-width1 {
+ sd3_bus1: sd3-bus-width1-pins {
samsung,pins = "gpg3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus4: sd3-bus-width4 {
+ sd3_bus4: sd3-bus-width4-pins {
samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- eint0: ext-int0 {
+ eint0: ext-int0-pins {
samsung,pins = "gph0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint8: ext-int8 {
+ eint8: ext-int8-pins {
samsung,pins = "gph1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint15: ext-int15 {
+ eint15: ext-int15-pins {
samsung,pins = "gph1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint16: ext-int16 {
+ eint16: ext-int16-pins {
samsung,pins = "gph2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint31: ext-int31 {
+ eint31: ext-int31-pins {
samsung,pins = "gph3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a_io: cam-port-a-io {
+ cam_port_a_io: cam-port-a-io-pins {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
@@ -777,21 +777,21 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a_clk_active: cam-port-a-clk-active {
+ cam_port_a_clk_active: cam-port-a-clk-active-pins {
samsung,pins = "gpe1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_a_clk_idle: cam-port-a-clk-idle {
+ cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
samsung,pins = "gpe1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_b_io: cam-port-b-io {
+ cam_port_b_io: cam-port-b-io-pins {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -800,42 +800,42 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_b_clk_active: cam-port-b-clk-active {
+ cam_port_b_clk_active: cam-port-b-clk-active-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_b_clk_idle: cam-port-b-clk-idle {
+ cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_ctrl: lcd-ctrl {
+ lcd_ctrl: lcd-ctrl-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_sync: lcd-sync {
+ lcd_sync: lcd-sync-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_clk: lcd-clk {
+ lcd_clk: lcd-clk-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data24: lcd-data-width24 {
+ lcd_data24: lcd-data-width24-pins {
samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index ec45ced3cde6..998629a3c34f 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -270,7 +270,7 @@
clock-names = "pclk", "gclk";
};
- sha: sha@f002c000 {
+ sha: crypto@f002c000 {
compatible = "atmel,at91sam9g46-sha";
reg = <0xf002c000 0x100>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -280,7 +280,6 @@
dma-names = "tx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
clock-names = "sha_clk";
- status = "okay";
};
trng: trng@f0030000 {
@@ -288,10 +287,9 @@
reg = <0xf0030000 0x100>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
- status = "okay";
};
- aes: aes@f0034000 {
+ aes: crypto@f0034000 {
compatible = "atmel,at91sam9g46-aes";
reg = <0xf0034000 0x100>;
interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -304,10 +302,9 @@
dma-names = "tx", "rx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
clock-names = "aes_clk";
- status = "okay";
};
- tdes: tdes@f0038000 {
+ tdes: crypto@f0038000 {
compatible = "atmel,at91sam9g46-tdes";
reg = <0xf0038000 0x100>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -320,7 +317,6 @@
dma-names = "tx", "rx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
clock-names = "tdes_clk";
- status = "okay";
};
classd: classd@f003c000 {
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 09c741e8ecb8..89c71d419f82 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -306,7 +306,7 @@
status = "disabled";
};
- sha@f0028000 {
+ sha: crypto@f0028000 {
compatible = "atmel,at91sam9g46-sha";
reg = <0xf0028000 0x100>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -316,10 +316,9 @@
dma-names = "tx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "sha_clk";
- status = "okay";
};
- aes@f002c000 {
+ aes: crypto@f002c000 {
compatible = "atmel,at91sam9g46-aes";
reg = <0xf002c000 0x100>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -332,7 +331,6 @@
dma-names = "tx", "rx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "aes_clk";
- status = "okay";
};
spi0: spi@f8000000 {
@@ -415,7 +413,7 @@
pmecc: ecc-engine@f8014070 {
compatible = "atmel,sama5d2-pmecc";
reg = <0xf8014070 0x490>,
- <0xf8014500 0x100>;
+ <0xf8014500 0x200>;
};
};
@@ -1084,7 +1082,7 @@
#gpio-cells = <2>;
};
- tdes@fc044000 {
+ tdes: crypto@fc044000 {
compatible = "atmel,at91sam9g46-tdes";
reg = <0xfc044000 0x100>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1097,7 +1095,6 @@
dma-names = "tx", "rx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
clock-names = "tdes_clk";
- status = "okay";
};
classd: classd@fc048000 {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index d1841bffe3c5..8fa423c52592 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -381,7 +381,7 @@
status = "disabled";
};
- sha@f8034000 {
+ sha: crypto@f8034000 {
compatible = "atmel,at91sam9g46-sha";
reg = <0xf8034000 0x100>;
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -391,7 +391,7 @@
clock-names = "sha_clk";
};
- aes@f8038000 {
+ aes: crypto@f8038000 {
compatible = "atmel,at91sam9g46-aes";
reg = <0xf8038000 0x100>;
interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -402,7 +402,7 @@
clock-names = "aes_clk";
};
- tdes@f803c000 {
+ tdes: crypto@f803c000 {
compatible = "atmel,at91sam9g46-tdes";
reg = <0xf803c000 0x100>;
interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index f6e3e6f57252..7b9242664875 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -673,7 +673,7 @@
status = "disabled";
};
- aes@fc044000 {
+ aes: crypto@fc044000 {
compatible = "atmel,at91sam9g46-aes";
reg = <0xfc044000 0x100>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -684,10 +684,9 @@
dma-names = "tx", "rx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "aes_clk";
- status = "okay";
};
- tdes@fc04c000 {
+ tdes: crpyto@fc04c000 {
compatible = "atmel,at91sam9g46-tdes";
reg = <0xfc04c000 0x100>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -698,10 +697,9 @@
dma-names = "tx", "rx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "tdes_clk";
- status = "okay";
};
- sha@fc050000 {
+ sha: crypto@fc050000 {
compatible = "atmel,at91sam9g46-sha";
reg = <0xfc050000 0x100>;
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -710,7 +708,6 @@
dma-names = "tx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "sha_clk";
- status = "okay";
};
hsmc: smc@fc05c000 {
diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
index eddcfbf4d223..4decd3a91a76 100644
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -30,6 +30,44 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ };
+ };
+
+ cpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-90000000 {
+ opp-hz = /bits/ 64 <90000000>;
+ opp-microvolt = <1050000 1050000 1225000>;
+ clock-latency-ns = <320000>;
+ };
+
+ opp-250000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ opp-microvolt = <1050000 1050000 1225000>;
+ clock-latency-ns = <320000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1050000 1050000 1225000>;
+ clock-latency-ns = <320000>;
+ opp-suspend;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1150000 1125000 1225000>;
+ clock-latency-ns = <320000>;
+ };
+
+ opp-1000000002 {
+ opp-hz = /bits/ 64 <1000000002>;
+ opp-microvolt = <1250000 1225000 1300000>;
+ clock-latency-ns = <320000>;
};
};
@@ -75,6 +113,45 @@
#size-cells = <1>;
ranges;
+ nfc_sram: sram@600000 {
+ compatible = "mmio-sram";
+ no-memory-wc;
+ reg = <0x00600000 0x2400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00600000 0x2400>;
+ };
+
+ nfc_io: nfc-io@10000000 {
+ compatible = "atmel,sama5d3-nfc-io", "syscon";
+ reg = <0x10000000 0x8000000>;
+ };
+
+ ebi: ebi@40000000 {
+ compatible = "atmel,sama5d3-ebi";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ atmel,smc = <&hsmc>;
+ reg = <0x40000000 0x20000000>;
+ ranges = <0x0 0x0 0x40000000 0x8000000
+ 0x1 0x0 0x48000000 0x8000000
+ 0x2 0x0 0x50000000 0x8000000
+ 0x3 0x0 0x58000000 0x8000000>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+ status = "disabled";
+
+ nand_controller: nand-controller {
+ compatible = "atmel,sama5d3-nand-controller";
+ atmel,nfc-sram = <&nfc_sram>;
+ atmel,nfc-io = <&nfc_io>;
+ ecc-engine = <&pmecc>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+ };
+ };
+
securam: securam@e0000000 {
compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
reg = <0xe0000000 0x4000>;
@@ -83,7 +160,6 @@
#size-cells = <1>;
ranges = <0 0xe0000000 0x4000>;
no-memory-wc;
- status = "okay";
};
secumod: secumod@e0004000 {
@@ -181,6 +257,22 @@
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
+ hsmc: hsmc@e0808000 {
+ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+ reg = <0xe0808000 0x1000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pmecc: ecc-engine@e0808070 {
+ compatible = "atmel,sama5d2-pmecc";
+ reg = <0xe0808070 0x490>,
+ <0xe0808500 0x200>;
+ };
+ };
+
qspi0: spi@e080c000 {
compatible = "microchip,sama7g5-ospi";
reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
@@ -211,6 +303,102 @@
status = "disabled";
};
+ can0: can@e0828000 {
+ compatible = "bosch,m_can";
+ reg = <0xe0828000 0x100>, <0x100000 0x7800>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+ assigned-clock-rates = <40000000>;
+ bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ can1: can@e082c000 {
+ compatible = "bosch,m_can";
+ reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+ assigned-clock-rates = <40000000>;
+ bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ can2: can@e0830000 {
+ compatible = "bosch,m_can";
+ reg = <0xe0830000 0x100>, <0x100000 0x10000>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 63>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+ assigned-clock-rates = <40000000>;
+ bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ can3: can@e0834000 {
+ compatible = "bosch,m_can";
+ reg = <0xe0834000 0x100>, <0x110000 0x4400>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 64>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+ assigned-clock-rates = <40000000>;
+ bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ can4: can@e0838000 {
+ compatible = "bosch,m_can";
+ reg = <0xe0838000 0x100>, <0x110000 0x8800>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 65>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+ assigned-clock-rates = <40000000>;
+ bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ can5: can@e083c000 {
+ compatible = "bosch,m_can";
+ reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 66>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+ assigned-clock-rates = <40000000>;
+ bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
adc: adc@e1000000 {
compatible = "microchip,sama7g5-adc";
reg = <0xe1000000 0x200>;
@@ -322,6 +510,19 @@
status = "disabled";
};
+ eic: interrupt-controller@e1628000 {
+ compatible = "microchip,sama7g5-eic";
+ reg = <0xe1628000 0xec>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
pit64b0: timer@e1800000 {
compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
reg = <0xe1800000 0x4000>;
@@ -338,6 +539,27 @@
clock-names = "pclk", "gclk";
};
+ aes: crypto@e1810000 {
+ compatible = "atmel,at91sam9g46-aes";
+ reg = <0xe1810000 0x100>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+ clock-names = "aes_clk";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+ <&dma0 AT91_XDMAC_DT_PERID(2)>;
+ dma-names = "tx", "rx";
+ };
+
+ sha: crypto@e1814000 {
+ compatible = "atmel,at91sam9g46-sha";
+ reg = <0xe1814000 0x100>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+ clock-names = "sha_clk";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+ dma-names = "tx";
+ };
+
flx0: flexcom@e1818000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe1818000 0x200>;
@@ -382,8 +604,6 @@
dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
<&dma0 AT91_XDMAC_DT_PERID(8)>;
dma-names = "rx", "tx";
- atmel,use-dma-rx;
- atmel,use-dma-tx;
status = "disabled";
};
};
@@ -420,6 +640,17 @@
status = "disabled";
};
+ tdes: crypto@e2014000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xe2014000 0x100>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+ clock-names = "tdes_clk";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+ <&dma0 AT91_XDMAC_DT_PERID(53)>;
+ dma-names = "tx", "rx";
+ };
+
flx4: flexcom@e2018000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe2018000 0x200>;
@@ -558,8 +789,6 @@
dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
<&dma0 AT91_XDMAC_DT_PERID(22)>;
dma-names = "rx", "tx";
- atmel,use-dma-rx;
- atmel,use-dma-tx;
status = "disabled";
};
};
@@ -584,8 +813,6 @@
dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
<&dma0 AT91_XDMAC_DT_PERID(24)>;
dma-names = "rx", "tx";
- atmel,use-dma-rx;
- atmel,use-dma-tx;
status = "disabled";
};
};
@@ -618,13 +845,11 @@
uddrc: uddrc@e3800000 {
compatible = "microchip,sama7g5-uddrc";
reg = <0xe3800000 0x4000>;
- status = "okay";
};
ddr3phy: ddr3phy@e3804000 {
compatible = "microchip,sama7g5-ddr3phy";
reg = <0xe3804000 0x1000>;
- status = "okay";
};
gic: interrupt-controller@e8c11000 {
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
index 2a3364b26361..a75c059b6727 100644
--- a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
@@ -6,7 +6,7 @@
/ {
model = "Enclustra Mercury AA1";
- compatible = "altr,socfpga-arria10", "altr,socfpga";
+ compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga";
aliases {
ethernet0 = &gmac0;
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 7edebe20e859..ec7365444a3b 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -6,7 +6,7 @@
/ {
model = "Altera SOCFPGA Arria 10";
- compatible = "altr,socfpga-arria10", "altr,socfpga";
+ compatible = "altr,socfpga-arria10-socdk", "altr,socfpga-arria10", "altr,socfpga";
aliases {
ethernet0 = &gmac0;
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 1b02d46496a8..7f5458d8fccc 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -7,7 +7,7 @@
/ {
model = "Altera SOCFPGA Arria V SoC Development Kit";
- compatible = "altr,socfpga-arria5", "altr,socfpga";
+ compatible = "altr,socfpga-arria5-socdk", "altr,socfpga-arria5", "altr,socfpga";
chosen {
bootargs = "earlyprintk";
@@ -50,7 +50,7 @@
};
};
- regulator_3_3v: 3-3-v-regulator {
+ regulator_3_3v: regulator {
compatible = "regulator-fixed";
regulator-name = "3.3V";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
index f6561766d83f..76262f1e5e03 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
@@ -24,7 +24,7 @@
reg = <0x0 0x20000000>; /* 512MB */
};
- regulator_3_3v: 3-3-v-regulator {
+ regulator_3_3v: regulator {
compatible = "regulator-fixed";
regulator-name = "3.3V";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
index 67076e1b1c7f..c8f051fb2bf6 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
@@ -24,7 +24,7 @@
ethernet0 = &gmac1;
};
- regulator_3_3v: 3-3-v-regulator {
+ regulator_3_3v: regulator {
compatible = "regulator-fixed";
regulator-name = "3.3V";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 51bb436784e2..253ef139181d 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -50,7 +50,7 @@
};
};
- regulator_3_3v: 3-3-v-regulator {
+ regulator_3_3v: regulator {
compatible = "regulator-fixed";
regulator-name = "3.3V";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index cae9ddd5ed38..3dd99c7c95e0 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -111,7 +111,7 @@
};
};
- regulator_3_3v: vcc3p3-regulator {
+ regulator_3_3v: regulator {
compatible = "regulator-fixed";
regulator-name = "VCC3P3";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
index 3f7aa7bf0863..b0003f350e65 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -26,7 +26,7 @@
ethernet0 = &gmac1;
};
- regulator_3_3v: 3-3-v-regulator {
+ regulator_3_3v: regulator {
compatible = "regulator-fixed";
regulator-name = "3.3V";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 2cf19386a525..35137c6e52ee 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -28,26 +28,28 @@
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
ab8500_clock: clock-controller {
compatible = "stericsson,ab8500-clk";
#clock-cells = <1>;
};
- ab8500_gpio: ab8500-gpiocontroller {
+ ab8500_gpio: gpio {
compatible = "stericsson,ab8500-gpio";
gpio-controller;
#gpio-cells = <2>;
};
- ab8500-rtc {
+ rtc {
compatible = "stericsson,ab8500-rtc";
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
<18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "60S", "ALARM";
};
- gpadc: ab8500-gpadc {
+ gpadc: adc {
compatible = "stericsson,ab8500-gpadc";
interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
<39 IRQ_TYPE_LEVEL_HIGH>;
@@ -120,13 +122,10 @@
};
};
- ab8500_temp {
+ thermal {
compatible = "stericsson,abx500-temp";
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ABX500_TEMP_WARM";
- io-channels = <&gpadc 0x06>,
- <&gpadc 0x07>;
- io-channel-names = "aux1", "aux2";
};
ab8500_fg {
@@ -212,7 +211,7 @@
monitored-battery = <&battery>;
};
- ab8500_usb: ab8500_usb {
+ ab8500_usb: phy {
compatible = "stericsson,ab8500-usb";
interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
<96 IRQ_TYPE_LEVEL_HIGH>,
@@ -236,7 +235,7 @@
#phy-cells = <0>;
};
- ab8500-ponkey {
+ key {
compatible = "stericsson,ab8500-poweron-key";
interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
<7 IRQ_TYPE_LEVEL_HIGH>;
@@ -247,29 +246,31 @@
compatible = "stericsson,ab8500-sysctrl";
};
- ab8500-pwm-1 {
+ pwm@1 {
compatible = "stericsson,ab8500-pwm";
+ reg = <1>;
clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
clock-names = "intclk";
+ #pwm-cells = <1>;
};
- ab8500-pwm-2 {
+ pwm@2 {
compatible = "stericsson,ab8500-pwm";
+ reg = <2>;
clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
clock-names = "intclk";
+ #pwm-cells = <1>;
};
- ab8500-pwm-3 {
+ pwm@3 {
compatible = "stericsson,ab8500-pwm";
+ reg = <3>;
clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
clock-names = "intclk";
+ #pwm-cells = <1>;
};
- ab8500-debugfs {
- compatible = "stericsson,ab8500-debug";
- };
-
- codec: ab8500-codec {
+ codec: codec {
compatible = "stericsson,ab8500-codec";
V-AUD-supply = <&ab8500_ldo_audio_reg>;
@@ -283,7 +284,7 @@
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};
- ext_regulators: ab8500-ext-regulators {
+ ext_regulators: regulator-external {
compatible = "stericsson,ab8500-ext-regulator";
ab8500_ext1_reg: ab8500_ext1 {
@@ -307,7 +308,7 @@
};
};
- ab8500-regulators {
+ regulator {
compatible = "stericsson,ab8500-regulator";
vin-supply = <&ab8500_ext3_reg>;
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index e98335e9d1cb..131c82508e82 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -25,26 +25,28 @@
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
ab8500_clock: clock-controller {
compatible = "stericsson,ab8500-clk";
#clock-cells = <1>;
};
- ab8505_gpio: ab8505-gpiocontroller {
+ ab8505_gpio: gpio {
compatible = "stericsson,ab8505-gpio";
gpio-controller;
#gpio-cells = <2>;
};
- ab8500-rtc {
+ rtc {
compatible = "stericsson,ab8500-rtc";
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
<18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "60S", "ALARM";
};
- gpadc: ab8500-gpadc {
+ gpadc: adc {
compatible = "stericsson,ab8500-gpadc";
interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "SW_CONV_END";
@@ -92,8 +94,13 @@
};
};
+ thermal {
+ compatible = "stericsson,abx500-temp";
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ABX500_TEMP_WARM";
+ };
+
ab8500_fg {
- status = "disabled";
compatible = "stericsson,ab8500-fg";
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
<8 IRQ_TYPE_LEVEL_HIGH>,
@@ -111,7 +118,6 @@
};
ab8500_btemp {
- status = "disabled";
compatible = "stericsson,ab8500-btemp";
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
<80 IRQ_TYPE_LEVEL_HIGH>,
@@ -131,7 +137,6 @@
};
ab8500_charger {
- status = "disabled";
compatible = "stericsson,ab8500-charger";
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
<11 IRQ_TYPE_LEVEL_HIGH>,
@@ -170,12 +175,11 @@
};
ab8500_chargalg {
- status = "disabled";
compatible = "stericsson,ab8500-chargalg";
monitored-battery = <&battery>;
};
- ab8500_usb: ab8500_usb {
+ ab8500_usb: phy {
compatible = "stericsson,ab8500-usb";
interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
<96 IRQ_TYPE_LEVEL_HIGH>,
@@ -199,7 +203,7 @@
#phy-cells = <0>;
};
- ab8500-ponkey {
+ key {
compatible = "stericsson,ab8500-poweron-key";
interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
<7 IRQ_TYPE_LEVEL_HIGH>;
@@ -210,17 +214,15 @@
compatible = "stericsson,ab8500-sysctrl";
};
- ab8500-pwm {
+ pwm@1 {
compatible = "stericsson,ab8500-pwm";
+ reg = <1>;
clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
clock-names = "intclk";
+ #pwm-cells = <1>;
};
- ab8500-debugfs {
- compatible = "stericsson,ab8500-debug";
- };
-
- codec: ab8500-codec {
+ codec: codec {
compatible = "stericsson,ab8500-codec";
V-AUD-supply = <&ab8500_ldo_audio_reg>;
@@ -233,7 +235,7 @@
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};
- ab8505-regulators {
+ regulator {
compatible = "stericsson,ab8505-regulator";
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 3ccb7b5c7162..9fa024900d53 100644
--- a/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -9,7 +9,7 @@
soc {
prcmu@80157000 {
ab8500 {
- ab8500-gpiocontroller {
+ gpio {
/* Hog a few default settings */
pinctrl-names = "default";
pinctrl-0 = <&gpio2_default_mode>,
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 718752a0248e..fbaa0ce46427 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -16,7 +16,24 @@
battery: battery {
compatible = "simple-battery";
battery-type = "lithium-ion-polymer";
- thermistor-on-batctrl;
+ };
+
+ thermal-zones {
+ battery-thermal {
+ /* This zone will be polled by the battery temperature code */
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&bat_therm>;
+ };
+ };
+
+ bat_therm: thermistor {
+ compatible = "murata,ncp18wb473";
+ io-channels = <&gpadc 0x02>; /* BatTemp */
+ pullup-uv = <1800000>;
+ pullup-ohm = <230000>;
+ pulldown-ohm = <0>;
+ #thermal-sensor-cells = <0>;
};
soc {
@@ -219,16 +236,16 @@
prcmu@80157000 {
ab8500 {
- ab8500-gpiocontroller {
+ gpio {
};
- ab8500_usb {
+ phy {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&usb_a_1_default>;
pinctrl-1 = <&usb_a_1_sleep>;
};
- ab8500-regulators {
+ regulator {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
};
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index fb719c8a8eb2..1c9094f24893 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -20,7 +20,24 @@
battery: battery {
compatible = "simple-battery";
battery-type = "lithium-ion-polymer";
- thermistor-on-batctrl;
+ };
+
+ thermal-zones {
+ battery-thermal {
+ /* This zone will be polled by the battery temperature code */
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&bat_therm>;
+ };
+ };
+
+ bat_therm: thermistor {
+ compatible = "murata,ncp18wb473";
+ io-channels = <&gpadc 0x02>; /* BatTemp */
+ pullup-uv = <1800000>;
+ pullup-ohm = <230000>;
+ pulldown-ohm = <0>;
+ #thermal-sensor-cells = <0>;
};
en_3v3_reg: en_3v3 {
@@ -384,7 +401,7 @@
prcmu@80157000 {
ab8500 {
- ab8500-gpiocontroller {
+ gpio {
/*
* AB8500 GPIOs are numbered starting from 1, so the first
* index 0 is what in the datasheet is called "GPIO1", and
@@ -406,13 +423,13 @@
"PM_GPIO42"; /* AB8500 GPIO42 */
};
- ab8500_usb {
+ phy {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&usb_a_1_default>;
pinctrl-1 = <&usb_a_1_sleep>;
};
- ext_regulators: ab8500-ext-regulators {
+ ext_regulators: regulator-external {
ab8500_ext1_reg: ab8500_ext1 {
regulator-name = "ab8500-ext-supply1";
};
@@ -426,7 +443,7 @@
};
};
- ab8500-regulators {
+ regulator {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index fbd60065542d..1c1725d31c7c 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -47,6 +47,24 @@
compatible = "samsung,eb425161lu";
};
+ thermal-zones {
+ battery-thermal {
+ /* This zone will be polled by the battery temperature code */
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&bat_therm>;
+ };
+ };
+
+ bat_therm: thermistor {
+ compatible = "samsung,1404-001221";
+ io-channels = <&gpadc 0x02>; /* BatTemp */
+ pullup-uv = <1800000>;
+ pullup-ohm = <230000>;
+ pulldown-ohm = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
/* TI TXS0206 level translator for 2.9 V */
sd_level_translator: regulator-gpio {
compatible = "regulator-fixed";
@@ -459,13 +477,13 @@
prcmu@80157000 {
ab8500 {
- ab8500_usb {
+ phy {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&usb_a_1_default>;
pinctrl-1 = <&usb_a_1_sleep>;
};
- ab8500-regulators {
+ regulator {
ab8500_ldo_aux1 {
/* Used for VDD for sensors */
regulator-name = "V-SENSORS-VDD";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
index 1c0e5cfeddac..fd170974765f 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -24,6 +24,24 @@
compatible = "samsung,eb585157lu";
};
+ thermal-zones {
+ battery-thermal {
+ /* This zone will be polled by the battery temperature code */
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&bat_therm>;
+ };
+ };
+
+ bat_therm: thermistor {
+ compatible = "samsung,1404-001221";
+ io-channels = <&gpadc 0x02>; /* BatTemp */
+ pullup-uv = <1800000>;
+ pullup-ohm = <230000>;
+ pulldown-ohm = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
/* TI TXS0206 level translator for 2.9 V */
sd_level_translator: regulator-gpio {
compatible = "regulator-fixed";
@@ -432,13 +450,13 @@
prcmu@80157000 {
ab8500 {
- ab8500_usb {
+ phy {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&usb_a_1_default>;
pinctrl-1 = <&usb_a_1_sleep>;
};
- ab8500-regulators {
+ regulator {
ab8500_ldo_aux1 {
/* Used for VDD for sensors */
regulator-name = "V-SENSORS-VDD";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index fc4c5166d85b..290ab59e863d 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -29,6 +29,24 @@
compatible = "samsung,eb-l1m7flu";
};
+ thermal-zones {
+ battery-thermal {
+ /* This zone will be polled by the battery temperature code */
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&bat_therm>;
+ };
+ };
+
+ bat_therm: thermistor {
+ compatible = "samsung,1404-001221";
+ io-channels = <&gpadc 0x02>; /* BatTemp */
+ pullup-uv = <1800000>;
+ pullup-ohm = <230000>;
+ pulldown-ohm = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
i2c-gpio-0 {
compatible = "i2c-gpio";
sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -280,13 +298,13 @@
prcmu@80157000 {
ab8505 {
- ab8500_usb {
+ phy {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&usb_a_1_default>;
pinctrl-1 = <&usb_a_1_sleep>;
};
- ab8505-regulators {
+ regulator {
ab8500_ldo_aux1 {
regulator-name = "sensor_3v";
regulator-min-microvolt = <3000000>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index 5ddcbc1a855d..42762bfcd878 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -24,6 +24,24 @@
compatible = "samsung,eb535151vu";
};
+ thermal-zones {
+ battery-thermal {
+ /* This zone will be polled by the battery temperature code */
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&bat_therm>;
+ };
+ };
+
+ bat_therm: thermistor {
+ compatible = "samsung,1404-001221";
+ io-channels = <&gpadc 0x02>; /* BatTemp */
+ pullup-uv = <1800000>;
+ pullup-ohm = <230000>;
+ pulldown-ohm = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
/* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */
ldo_3v3_reg: regulator-gpio-ldo-3v3 {
compatible = "regulator-fixed";
@@ -480,13 +498,13 @@
prcmu@80157000 {
ab8500 {
- ab8500_usb {
+ phy {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&usb_a_1_default>;
pinctrl-1 = <&usb_a_1_sleep>;
};
- ab8500-regulators {
+ regulator {
ab8500_ldo_aux1 {
/* Used for VDD for sensors */
regulator-name = "V-SENSORS-VDD";
@@ -594,7 +612,7 @@
reg = <0x08>;
mount-matrix = "0", "1", "0",
"-1", "0", "0",
- "0", "0", "-1";
+ "0", "0", "1";
vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
index 9ec3f85b1a18..2a5bf54137ce 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
@@ -28,6 +28,24 @@
compatible = "samsung,eb425161la";
};
+ thermal-zones {
+ battery-thermal {
+ /* This zone will be polled by the battery temperature code */
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&bat_therm>;
+ };
+ };
+
+ bat_therm: thermistor {
+ compatible = "samsung,1404-001221";
+ io-channels = <&gpadc 0x02>; /* BatTemp */
+ pullup-uv = <1800000>;
+ pullup-ohm = <230000>;
+ pulldown-ohm = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
/* TI TXS0206 level translator for 2.9 V */
sd_level_translator: regulator-gpio {
compatible = "regulator-fixed";
@@ -301,13 +319,13 @@
prcmu@80157000 {
ab8505 {
- ab8500_usb {
+ phy {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&usb_a_1_default>;
pinctrl-1 = <&usb_a_1_sleep>;
};
- ab8505-regulators {
+ regulator {
ab8500_ldo_aux1 {
/* Used for VDD for sensors */
regulator-name = "AUX1";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index f8c5899fbdba..dcb03ce7cbd4 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -24,6 +24,24 @@
compatible = "samsung,eb485159lu";
};
+ thermal-zones {
+ battery-thermal {
+ /* This zone will be polled by the battery temperature code */
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&bat_therm>;
+ };
+ };
+
+ bat_therm: thermistor {
+ compatible = "samsung,1404-001221";
+ io-channels = <&gpadc 0x02>; /* BatTemp */
+ pullup-uv = <1800000>;
+ pullup-ohm = <230000>;
+ pulldown-ohm = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
/* TI TXS0206 level translator for 2.9 V */
sd_level_translator: regulator-gpio {
compatible = "regulator-fixed";
@@ -281,13 +299,13 @@
prcmu@80157000 {
ab8505 {
- ab8500_usb {
+ phy {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&usb_a_1_default>;
pinctrl-1 = <&usb_a_1_sleep>;
};
- ab8505-regulators {
+ regulator {
ab8500_ldo_aux1 {
/* Used for VDD for sensors */
regulator-name = "AUX1";
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 9cce9541e26b..350bcfcf498b 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -29,7 +29,7 @@
*/
clockgen-a9@92b0000 {
compatible = "st,clkgen-c32";
- reg = <0x92b0000 0xffff>;
+ reg = <0x92b0000 0x10000>;
clockgen_a9_pll: clockgen-a9-pll {
#clock-cells = <1>;
@@ -37,32 +37,27 @@
clocks = <&clk_sysin>;
};
- };
- /*
- * ARM CPU related clocks.
- */
- clk_m_a9: clk-m-a9@92b0000 {
- #clock-cells = <0>;
- compatible = "st,stih407-clkgen-a9-mux";
- reg = <0x92b0000 0x10000>;
-
- clocks = <&clockgen_a9_pll 0>,
- <&clockgen_a9_pll 0>,
- <&clk_s_c0_flexgen 13>,
- <&clk_m_a9_ext2f_div2>;
+ clk_m_a9: clk-m-a9 {
+ #clock-cells = <0>;
+ compatible = "st,stih407-clkgen-a9-mux";
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_s_c0_flexgen 13>,
+ <&clk_m_a9_ext2f_div2>;
- /*
- * ARM Peripheral clock for timers
- */
- arm_periph_clk: clk-m-a9-periphs {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
- clocks = <&clk_m_a9>;
- clock-div = <2>;
- clock-mult = <1>;
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
};
};
@@ -87,14 +82,6 @@
};
};
- clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
- #clock-cells = <1>;
- compatible = "st,quadfs-pll";
- reg = <0x9103000 0x1000>;
-
- clocks = <&clk_sysin>;
- };
-
clk_s_c0: clockgen-c@9103000 {
compatible = "st,clkgen-c32";
reg = <0x9103000 0x1000>;
@@ -113,6 +100,13 @@
clocks = <&clk_sysin>;
};
+ clk_s_c0_quadfs: clk-s-c0-quadfs {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-pll";
+
+ clocks = <&clk_sysin>;
+ };
+
clk_s_c0_flexgen: clk-s-c0-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen", "st,flexgen-stih407-c0";
@@ -142,18 +136,17 @@
};
};
- clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
- #clock-cells = <1>;
- compatible = "st,quadfs-d0";
- reg = <0x9104000 0x1000>;
-
- clocks = <&clk_sysin>;
- };
-
clockgen-d0@9104000 {
compatible = "st,clkgen-c32";
reg = <0x9104000 0x1000>;
+ clk_s_d0_quadfs: clk-s-d0-quadfs {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-d0";
+
+ clocks = <&clk_sysin>;
+ };
+
clk_s_d0_flexgen: clk-s-d0-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen", "st,flexgen-stih407-d0";
@@ -166,18 +159,17 @@
};
};
- clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
- #clock-cells = <1>;
- compatible = "st,quadfs-d2";
- reg = <0x9106000 0x1000>;
-
- clocks = <&clk_sysin>;
- };
-
clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
+ clk_s_d2_quadfs: clk-s-d2-quadfs {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-d2";
+
+ clocks = <&clk_sysin>;
+ };
+
clk_s_d2_flexgen: clk-s-d2-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen", "st,flexgen-stih407-d2";
@@ -192,18 +184,17 @@
};
};
- clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
- #clock-cells = <1>;
- compatible = "st,quadfs-d3";
- reg = <0x9107000 0x1000>;
-
- clocks = <&clk_sysin>;
- };
-
clockgen-d3@9107000 {
compatible = "st,clkgen-c32";
reg = <0x9107000 0x1000>;
+ clk_s_d3_quadfs: clk-s-d3-quadfs {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-d3";
+
+ clocks = <&clk_sysin>;
+ };
+
clk_s_d3_flexgen: clk-s-d3-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen", "st,flexgen-stih407-d3";
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 21f3347a91d6..1713f7878117 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -115,37 +115,140 @@
status = "okay";
};
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&intc>;
+ restart: restart-controller {
+ compatible = "st,stih407-restart";
+ st,syscfg = <&syscfg_sbc_reg>;
+ status = "okay";
+ };
+
+ powerdown: powerdown-controller {
+ compatible = "st,stih407-powerdown";
+ #reset-cells = <1>;
+ };
+
+ softreset: softreset-controller {
+ compatible = "st,stih407-softreset";
+ #reset-cells = <1>;
+ };
+
+ picophyreset: picophyreset-controller {
+ compatible = "st,stih407-picophyreset";
+ #reset-cells = <1>;
+ };
+
+ irq-syscfg {
+ compatible = "st,stih407-irq-syscfg";
+ st,syscfg = <&syscfg_core>;
+ st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+ <ST_IRQ_SYSCFG_PMU_1>;
+ st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+ <ST_IRQ_SYSCFG_DISABLED>;
+ };
+
+ usb2_picophy0: phy1 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0x100 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY2_RESET>;
+ reset-names = "global", "port";
+ };
+
+ miphy28lp_phy: miphy28lp {
+ compatible = "st,miphy28lp-phy";
+ st,syscfg = <&syscfg_core>;
+ #address-cells = <1>;
+ #size-cells = <1>;
ranges;
- compatible = "simple-bus";
- restart: restart-controller@0 {
- compatible = "st,stih407-restart";
- reg = <0 0>;
- st,syscfg = <&syscfg_sbc_reg>;
- status = "okay";
- };
+ phy_port0: port@9b22000 {
+ reg = <0x9b22000 0xff>,
+ <0x9b09000 0xff>,
+ <0x9b04000 0xff>;
+ reg-names = "sata-up",
+ "pcie-up",
+ "pipew";
+
+ st,syscfg = <0x114 0x818 0xe0 0xec>;
+ #phy-cells = <1>;
- powerdown: powerdown-controller@0 {
- compatible = "st,stih407-powerdown";
- reg = <0 0>;
- #reset-cells = <1>;
+ reset-names = "miphy-sw-rst";
+ resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
};
- softreset: softreset-controller@0 {
- compatible = "st,stih407-softreset";
- reg = <0 0>;
- #reset-cells = <1>;
+ phy_port1: port@9b2a000 {
+ reg = <0x9b2a000 0xff>,
+ <0x9b19000 0xff>,
+ <0x9b14000 0xff>;
+ reg-names = "sata-up",
+ "pcie-up",
+ "pipew";
+
+ st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+ #phy-cells = <1>;
+
+ reset-names = "miphy-sw-rst";
+ resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
};
- picophyreset: picophyreset-controller@0 {
- compatible = "st,stih407-picophyreset";
- reg = <0 0>;
- #reset-cells = <1>;
+ phy_port2: port@8f95000 {
+ reg = <0x8f95000 0xff>,
+ <0x8f90000 0xff>;
+ reg-names = "pipew",
+ "usb3-up";
+
+ st,syscfg = <0x11c 0x820>;
+
+ #phy-cells = <1>;
+
+ reset-names = "miphy-sw-rst";
+ resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
};
+ };
+
+ st231_gp0: st231-gp0 {
+ compatible = "st,st231-rproc";
+ memory-region = <&gp0_reserved>;
+ resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
+ reset-names = "sw_reset";
+ clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+ clock-frequency = <600000000>;
+ st,syscfg = <&syscfg_core 0x22c>;
+ #mbox-cells = <1>;
+ mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+ mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
+ };
+
+ st231_delta: st231-delta {
+ compatible = "st,st231-rproc";
+ memory-region = <&delta_reserved>;
+ resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
+ reset-names = "sw_reset";
+ clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
+ clock-frequency = <600000000>;
+ st,syscfg = <&syscfg_core 0x224>;
+ #mbox-cells = <1>;
+ mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+ mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
+ };
+
+ delta0 {
+ compatible = "st,st-delta";
+ clock-names = "delta",
+ "delta-st231",
+ "delta-flash-promip";
+ clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+ <&clk_s_c0_flexgen CLK_ST231_DMU>,
+ <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+ compatible = "simple-bus";
syscfg_sbc: sbc-syscfg@9620000 {
compatible = "st,stih407-sbc-syscfg", "syscon";
@@ -189,16 +292,6 @@
reg = <0x94b5100 0x1000>;
};
- irq-syscfg@0 {
- compatible = "st,stih407-irq-syscfg";
- reg = <0 0>;
- st,syscfg = <&syscfg_core>;
- st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
- <ST_IRQ_SYSCFG_PMU_1>;
- st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
- <ST_IRQ_SYSCFG_DISABLED>;
- };
-
/* Display */
vtg_main: sti-vtg-main@8d02800 {
compatible = "st,vtg";
@@ -389,70 +482,6 @@
status = "disabled";
};
- usb2_picophy0: phy1@0 {
- compatible = "st,stih407-usb2-phy";
- reg = <0 0>;
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0x100 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY2_RESET>;
- reset-names = "global", "port";
- };
-
- miphy28lp_phy: miphy28lp@0 {
- compatible = "st,miphy28lp-phy";
- st,syscfg = <&syscfg_core>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- reg = <0 0>;
-
- phy_port0: port@9b22000 {
- reg = <0x9b22000 0xff>,
- <0x9b09000 0xff>,
- <0x9b04000 0xff>;
- reg-names = "sata-up",
- "pcie-up",
- "pipew";
-
- st,syscfg = <0x114 0x818 0xe0 0xec>;
- #phy-cells = <1>;
-
- reset-names = "miphy-sw-rst";
- resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
- };
-
- phy_port1: port@9b2a000 {
- reg = <0x9b2a000 0xff>,
- <0x9b19000 0xff>,
- <0x9b14000 0xff>;
- reg-names = "sata-up",
- "pcie-up",
- "pipew";
-
- st,syscfg = <0x118 0x81c 0xe4 0xf0>;
-
- #phy-cells = <1>;
-
- reset-names = "miphy-sw-rst";
- resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
- };
-
- phy_port2: port@8f95000 {
- reg = <0x8f95000 0xff>,
- <0x8f90000 0xff>;
- reg-names = "pipew",
- "usb3-up";
-
- st,syscfg = <0x11c 0x820>;
-
- #phy-cells = <1>;
-
- reset-names = "miphy-sw-rst";
- resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
- };
- };
-
spi@9840000 {
compatible = "st,comms-ssc4-spi";
reg = <0x9840000 0x110>;
@@ -815,34 +844,6 @@
status = "okay";
};
- st231_gp0: st231-gp0@0 {
- compatible = "st,st231-rproc";
- reg = <0 0>;
- memory-region = <&gp0_reserved>;
- resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
- reset-names = "sw_reset";
- clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
- clock-frequency = <600000000>;
- st,syscfg = <&syscfg_core 0x22c>;
- #mbox-cells = <1>;
- mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
- mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
- };
-
- st231_delta: st231-delta@0 {
- compatible = "st,st231-rproc";
- reg = <0 0>;
- memory-region = <&delta_reserved>;
- resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
- reset-names = "sw_reset";
- clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
- clock-frequency = <600000000>;
- st,syscfg = <&syscfg_core 0x224>;
- #mbox-cells = <1>;
- mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
- mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
- };
-
/* fdma audio */
fdma0: dma-controller@8e20000 {
compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
@@ -986,16 +987,5 @@
status = "disabled";
};
-
- delta0@0 {
- compatible = "st,st-delta";
- reg = <0 0>;
- clock-names = "delta",
- "delta-st231",
- "delta-flash-promip";
- clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
- <&clk_s_c0_flexgen CLK_ST231_DMU>,
- <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
- };
};
};
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 9d3b118f5f0f..538ff98ca1b1 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -24,6 +24,14 @@
ethernet0 = &ethernet0;
};
+ usb2_picophy1: phy2 {
+ status = "okay";
+ };
+
+ usb2_picophy2: phy3 {
+ status = "okay";
+ };
+
soc {
mmc0: sdhci@9060000 {
@@ -33,14 +41,6 @@
sd-uhs-ddr50;
};
- usb2_picophy1: phy2@0 {
- status = "okay";
- };
-
- usb2_picophy2: phy3@0 {
- status = "okay";
- };
-
ohci0: usb@9a03c00 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 9d579c16c295..26d93f26f6d0 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -75,6 +75,21 @@
};
};
+ miphy28lp_phy: miphy28lp {
+
+ phy_port1: port@9b2a000 {
+ st,osc-force-ext;
+ };
+ };
+
+ usb2_picophy1: phy2 {
+ status = "okay";
+ };
+
+ usb2_picophy2: phy3 {
+ status = "okay";
+ };
+
soc {
/* Low speed expansion connector */
uart0: serial@9830000 {
@@ -145,14 +160,6 @@
status = "okay";
};
- usb2_picophy1: phy2@0 {
- status = "okay";
- };
-
- usb2_picophy2: phy3@0 {
- status = "okay";
- };
-
ohci0: usb@9a03c00 {
status = "okay";
};
@@ -196,13 +203,6 @@
status = "okay";
};
- miphy28lp_phy: miphy28lp@0 {
-
- phy_port1: port@9b2a000 {
- st,osc-force-ext;
- };
- };
-
sata1: sata@9b28000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 6b0e6d4477a3..abac98a1810b 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -32,7 +32,7 @@
*/
clockgen-a9@92b0000 {
compatible = "st,clkgen-c32";
- reg = <0x92b0000 0xffff>;
+ reg = <0x92b0000 0x10000>;
clockgen_a9_pll: clockgen-a9-pll {
#clock-cells = <1>;
@@ -40,29 +40,29 @@
clocks = <&clk_sysin>;
};
- };
- /*
- * ARM CPU related clocks.
- */
- clk_m_a9: clk-m-a9@92b0000 {
- #clock-cells = <0>;
- compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
- reg = <0x92b0000 0x10000>;
-
- clocks = <&clockgen_a9_pll 0>,
- <&clockgen_a9_pll 0>,
- <&clk_s_c0_flexgen 13>,
- <&clk_m_a9_ext2f_div2>;
/*
- * ARM Peripheral clock for timers
+ * ARM CPU related clocks.
*/
- arm_periph_clk: clk-m-a9-periphs {
+ clk_m_a9: clk-m-a9 {
#clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&clk_m_a9>;
- clock-div = <2>;
- clock-mult = <1>;
+ compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_s_c0_flexgen 13>,
+ <&clk_m_a9_ext2f_div2>;
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
};
};
@@ -87,14 +87,6 @@
};
};
- clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
- #clock-cells = <1>;
- compatible = "st,quadfs-pll";
- reg = <0x9103000 0x1000>;
-
- clocks = <&clk_sysin>;
- };
-
clk_s_c0: clockgen-c@9103000 {
compatible = "st,clkgen-c32";
reg = <0x9103000 0x1000>;
@@ -113,6 +105,13 @@
clocks = <&clk_sysin>;
};
+ clk_s_c0_quadfs: clk-s-c0-quadfs {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-pll";
+
+ clocks = <&clk_sysin>;
+ };
+
clk_s_c0_flexgen: clk-s-c0-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen", "st,flexgen-stih410-c0";
@@ -142,18 +141,17 @@
};
};
- clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
- #clock-cells = <1>;
- compatible = "st,quadfs-d0";
- reg = <0x9104000 0x1000>;
-
- clocks = <&clk_sysin>;
- };
-
clockgen-d0@9104000 {
compatible = "st,clkgen-c32";
reg = <0x9104000 0x1000>;
+ clk_s_d0_quadfs: clk-s-d0-quadfs {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-d0";
+
+ clocks = <&clk_sysin>;
+ };
+
clk_s_d0_flexgen: clk-s-d0-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen", "st,flexgen-stih410-d0";
@@ -166,18 +164,17 @@
};
};
- clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
- #clock-cells = <1>;
- compatible = "st,quadfs-d2";
- reg = <0x9106000 0x1000>;
-
- clocks = <&clk_sysin>;
- };
-
clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
+ clk_s_d2_quadfs: clk-s-d2-quadfs {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-d2";
+
+ clocks = <&clk_sysin>;
+ };
+
clk_s_d2_flexgen: clk-s-d2-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen", "st,flexgen-stih407-d2";
@@ -192,18 +189,17 @@
};
};
- clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
- #clock-cells = <1>;
- compatible = "st,quadfs-d3";
- reg = <0x9107000 0x1000>;
-
- clocks = <&clk_sysin>;
- };
-
clockgen-d3@9107000 {
compatible = "st,clkgen-c32";
reg = <0x9107000 0x1000>;
+ clk_s_d3_quadfs: clk-s-d3-quadfs {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-d3";
+
+ clocks = <&clk_sysin>;
+ };
+
clk_s_d3_flexgen: clk-s-d3-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen", "st,flexgen-stih407-d3";
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 6d847019c554..ce2f62cf129b 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -12,31 +12,29 @@
bdisp0 = &bdisp0;
};
- soc {
- usb2_picophy1: phy2@0 {
- compatible = "st,stih407-usb2-phy";
- reg = <0 0>;
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xf8 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY0_RESET>;
- reset-names = "global", "port";
-
- status = "disabled";
- };
+ usb2_picophy1: phy2 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xf8 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+
+ status = "disabled";
+ };
- usb2_picophy2: phy3@0 {
- compatible = "st,stih407-usb2-phy";
- reg = <0 0>;
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xfc 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY1_RESET>;
- reset-names = "global", "port";
+ usb2_picophy2: phy3 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xfc 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
- status = "disabled";
- };
+ status = "disabled";
+ };
+ soc {
ohci0: usb@9a03c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
@@ -274,16 +272,6 @@
interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
};
- delta0@0 {
- compatible = "st,st-delta";
- clock-names = "delta",
- "delta-st231",
- "delta-flash-promip";
- clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
- <&clk_s_c0_flexgen CLK_ST231_DMU>,
- <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
- };
-
sti-cec@94a087c {
compatible = "st,stih-cec";
reg = <0x94a087c 0x64>;
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index b66e2b29edea..d21bcc7c1271 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -37,6 +37,17 @@
};
};
+ miphy28lp_phy: miphy28lp {
+
+ phy_port0: port@9b22000 {
+ st,osc-rdy;
+ };
+
+ phy_port1: port@9b2a000 {
+ st,osc-force-ext;
+ };
+ };
+
soc {
sbc_serial0: serial@9530000 {
status = "okay";
@@ -84,17 +95,6 @@
non-removable;
};
- miphy28lp_phy: miphy28lp@0 {
-
- phy_port0: port@9b22000 {
- st,osc-rdy;
- };
-
- phy_port1: port@9b2a000 {
- st,osc-force-ext;
- };
- };
-
st_dwc3: dwc3@8f94000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index e84c476b83ed..e1749e92a2e7 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -32,7 +32,7 @@
*/
clockgen-a9@92b0000 {
compatible = "st,clkgen-c32";
- reg = <0x92b0000 0xffff>;
+ reg = <0x92b0000 0x10000>;
clockgen_a9_pll: clockgen-a9-pll {
#clock-cells = <1>;
@@ -40,30 +40,29 @@
clocks = <&clk_sysin>;
};
- };
-
- /*
- * ARM CPU related clocks.
- */
- clk_m_a9: clk-m-a9@92b0000 {
- #clock-cells = <0>;
- compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
- reg = <0x92b0000 0x10000>;
-
- clocks = <&clockgen_a9_pll 0>,
- <&clockgen_a9_pll 0>,
- <&clk_s_c0_flexgen 13>,
- <&clk_m_a9_ext2f_div2>;
/*
- * ARM Peripheral clock for timers
+ * ARM CPU related clocks.
*/
- arm_periph_clk: clk-m-a9-periphs {
+ clk_m_a9: clk-m-a9 {
#clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&clk_m_a9>;
- clock-div = <2>;
- clock-mult = <1>;
+ compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_s_c0_flexgen 13>,
+ <&clk_m_a9_ext2f_div2>;
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
};
};
@@ -88,14 +87,6 @@
};
};
- clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
- #clock-cells = <1>;
- compatible = "st,quadfs-pll";
- reg = <0x9103000 0x1000>;
-
- clocks = <&clk_sysin>;
- };
-
clk_s_c0: clockgen-c@9103000 {
compatible = "st,clkgen-c32";
reg = <0x9103000 0x1000>;
@@ -114,6 +105,13 @@
clocks = <&clk_sysin>;
};
+ clk_s_c0_quadfs: clk-s-c0-quadfs {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-pll";
+
+ clocks = <&clk_sysin>;
+ };
+
clk_s_c0_flexgen: clk-s-c0-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen", "st,flexgen-stih418-c0";
@@ -143,18 +141,17 @@
};
};
- clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
- #clock-cells = <1>;
- compatible = "st,quadfs-d0";
- reg = <0x9104000 0x1000>;
-
- clocks = <&clk_sysin>;
- };
-
clockgen-d0@9104000 {
compatible = "st,clkgen-c32";
reg = <0x9104000 0x1000>;
+ clk_s_d0_quadfs: clk-s-d0-quadfs {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-d0";
+
+ clocks = <&clk_sysin>;
+ };
+
clk_s_d0_flexgen: clk-s-d0-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen", "st,flexgen-stih410-d0";
@@ -167,18 +164,17 @@
};
};
- clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
- #clock-cells = <1>;
- compatible = "st,quadfs-d2";
- reg = <0x9106000 0x1000>;
-
- clocks = <&clk_sysin>;
- };
-
clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;
+ clk_s_d2_quadfs: clk-s-d2-quadfs {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-d2";
+
+ clocks = <&clk_sysin>;
+ };
+
clk_s_d2_flexgen: clk-s-d2-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen", "st,flexgen-stih418-d2";
@@ -193,18 +189,17 @@
};
};
- clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
- #clock-cells = <1>;
- compatible = "st,quadfs-d3";
- reg = <0x9107000 0x1000>;
-
- clocks = <&clk_sysin>;
- };
-
clockgen-d3@9107000 {
compatible = "st,clkgen-c32";
reg = <0x9107000 0x1000>;
+ clk_s_d3_quadfs: clk-s-d3-quadfs {
+ #clock-cells = <1>;
+ compatible = "st,quadfs-d3";
+
+ clocks = <&clk_sysin>;
+ };
+
clk_s_d3_flexgen: clk-s-d3-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen", "st,flexgen-stih407-d3";
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index 97eda4392fbe..b35b9b7a7ccc 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -26,31 +26,29 @@
};
};
+ usb2_picophy1: phy2 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xf8 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+ };
+
+ usb2_picophy2: phy3 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xfc 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
+ };
+
soc {
rng11: rng@8a8a000 {
status = "disabled";
};
- usb2_picophy1: phy2@0 {
- compatible = "st,stih407-usb2-phy";
- reg = <0 0>;
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xf8 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY0_RESET>;
- reset-names = "global", "port";
- };
-
- usb2_picophy2: phy3@0 {
- compatible = "st,stih407-usb2-phy";
- reg = <0 0>;
- #phy-cells = <0>;
- st,syscfg = <&syscfg_core 0xfc 0xf4>;
- resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY1_RESET>;
- reset-names = "global", "port";
- };
-
ohci0: usb@9a03c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index d051f080e52e..4c72dedcd1be 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -71,6 +71,17 @@
};
};
+ miphy28lp_phy: miphy28lp {
+
+ phy_port0: port@9b22000 {
+ st,osc-rdy;
+ };
+
+ phy_port1: port@9b2a000 {
+ st,osc-force-ext;
+ };
+ };
+
soc {
sbc_serial0: serial@9530000 {
status = "okay";
@@ -128,17 +139,6 @@
st,i2c-min-sda-pulse-width-us = <5>;
};
- miphy28lp_phy: miphy28lp@0 {
-
- phy_port0: port@9b22000 {
- st,osc-rdy;
- };
-
- phy_port1: port@9b2a000 {
- st,osc-force-ext;
- };
- };
-
st_dwc3: dwc3@8f94000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index cb46326a8c75..0d98aca01736 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -308,6 +308,18 @@
};
};
+&timers5 {
+ /* Override timer5 to act as clockevent */
+ compatible = "st,stm32-timer";
+ interrupts = <50>;
+ status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
+ /delete-property/clock-names;
+ /delete-node/pwm;
+ /delete-node/timer@4;
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index 327613fd9666..a293e65141c6 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -194,6 +194,18 @@
bus-width = <4>;
};
+&timers5 {
+ /* Override timer5 to act as clockevent */
+ compatible = "st,stm32-timer";
+ interrupts = <50>;
+ status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
+ /delete-property/clock-names;
+ /delete-node/pwm;
+ /delete-node/timer@4;
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 6435e099c632..3b81228d46a2 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -205,6 +205,18 @@
};
};
+&timers5 {
+ /* Override timer5 to act as clockevent */
+ compatible = "st,stm32-timer";
+ interrupts = <50>;
+ status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
+ /delete-property/clock-names;
+ /delete-node/pwm;
+ /delete-node/timer@4;
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 8748d5850298..c31ceb821231 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -93,14 +93,6 @@
};
};
- timer2: timer@40000000 {
- compatible = "st,stm32-timer";
- reg = <0x40000000 0x400>;
- interrupts = <28>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
- status = "disabled";
- };
-
timers2: timers@40000000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -123,14 +115,6 @@
};
};
- timer3: timer@40000400 {
- compatible = "st,stm32-timer";
- reg = <0x40000400 0x400>;
- interrupts = <29>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
- status = "disabled";
- };
-
timers3: timers@40000400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -153,14 +137,6 @@
};
};
- timer4: timer@40000800 {
- compatible = "st,stm32-timer";
- reg = <0x40000800 0x400>;
- interrupts = <30>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
- status = "disabled";
- };
-
timers4: timers@40000800 {
#address-cells = <1>;
#size-cells = <0>;
@@ -183,13 +159,6 @@
};
};
- timer5: timer@40000c00 {
- compatible = "st,stm32-timer";
- reg = <0x40000c00 0x400>;
- interrupts = <50>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
- };
-
timers5: timers@40000c00 {
#address-cells = <1>;
#size-cells = <0>;
@@ -212,14 +181,6 @@
};
};
- timer6: timer@40001000 {
- compatible = "st,stm32-timer";
- reg = <0x40001000 0x400>;
- interrupts = <54>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
- status = "disabled";
- };
-
timers6: timers@40001000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -236,14 +197,6 @@
};
};
- timer7: timer@40001400 {
- compatible = "st,stm32-timer";
- reg = <0x40001400 0x400>;
- interrupts = <55>;
- clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
- status = "disabled";
- };
-
timers7: timers@40001400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -759,6 +712,16 @@
status = "disabled";
};
+ dma2d: dma2d@4002b000 {
+ compatible = "st,stm32-dma2d";
+ reg = <0x4002b000 0xc00>;
+ interrupts = <90>;
+ resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>;
+ clock-names = "dma2d";
+ status = "disabled";
+ };
+
usbotg_hs: usb@40040000 {
compatible = "snps,dwc2";
reg = <0x40040000 0x40000>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 30905ce672a0..5a0daf8e8b11 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -132,6 +132,10 @@
clock-frequency = <8000000>;
};
+&dma2d {
+ status = "okay";
+};
+
&dsi {
#address-cells = <1>;
#size-cells = <0>;
@@ -224,6 +228,18 @@
bus-width = <4>;
};
+&timers5 {
+ /* Override timer5 to act as clockevent */
+ compatible = "st,stm32-timer";
+ interrupts = <50>;
+ status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
+ /delete-property/clock-names;
+ /delete-node/pwm;
+ /delete-node/timer@4;
+};
+
&usart3 {
pinctrl-0 = <&usart3_pins_a>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
index 569d23cc61e5..c11616ed5fc6 100644
--- a/arch/arm/boot/dts/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -109,6 +109,18 @@
bus-width = <4>;
};
+&timers5 {
+ /* Override timer5 to act as clockevent */
+ compatible = "st,stm32-timer";
+ interrupts = <50>;
+ status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
+ /delete-property/clock-names;
+ /delete-node/pwm;
+ /delete-node/timer@4;
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 014b416f57e6..dc868e6da40e 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -75,14 +75,6 @@
};
soc {
- timer2: timer@40000000 {
- compatible = "st,stm32-timer";
- reg = <0x40000000 0x400>;
- interrupts = <28>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
- status = "disabled";
- };
-
timers2: timers@40000000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -105,14 +97,6 @@
};
};
- timer3: timer@40000400 {
- compatible = "st,stm32-timer";
- reg = <0x40000400 0x400>;
- interrupts = <29>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
- status = "disabled";
- };
-
timers3: timers@40000400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -135,14 +119,6 @@
};
};
- timer4: timer@40000800 {
- compatible = "st,stm32-timer";
- reg = <0x40000800 0x400>;
- interrupts = <30>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
- status = "disabled";
- };
-
timers4: timers@40000800 {
#address-cells = <1>;
#size-cells = <0>;
@@ -165,13 +141,6 @@
};
};
- timer5: timer@40000c00 {
- compatible = "st,stm32-timer";
- reg = <0x40000c00 0x400>;
- interrupts = <50>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
- };
-
timers5: timers@40000c00 {
#address-cells = <1>;
#size-cells = <0>;
@@ -194,14 +163,6 @@
};
};
- timer6: timer@40001000 {
- compatible = "st,stm32-timer";
- reg = <0x40001000 0x400>;
- interrupts = <54>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
- status = "disabled";
- };
-
timers6: timers@40001000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -218,14 +179,6 @@
};
};
- timer7: timer@40001400 {
- compatible = "st,stm32-timer";
- reg = <0x40001400 0x400>;
- interrupts = <55>;
- clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
- status = "disabled";
- };
-
timers7: timers@40001400 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index be943b701980..b038d0ed39e8 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -137,6 +137,18 @@
bus-width = <4>;
};
+&timers5 {
+ /* Override timer5 to act as clockevent */
+ compatible = "st,stm32-timer";
+ interrupts = <50>;
+ status = "okay";
+ /delete-property/#address-cells;
+ /delete-property/#size-cells;
+ /delete-property/clock-names;
+ /delete-node/pwm;
+ /delete-node/timer@4;
+};
+
&usart1 {
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
index 069f95f2b628..d2472cd8f1d0 100644
--- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
@@ -7,7 +7,7 @@
&pinctrl {
sdmmc1_b4_pins_a: sdmmc1-b4-0 {
- pins1 {
+ pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
<STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
@@ -17,12 +17,6 @@
drive-push-pull;
bias-disable;
};
- pins2 {
- pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
- slew-rate = <2>;
- drive-push-pull;
- bias-disable;
- };
};
sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
@@ -36,16 +30,81 @@
bias-disable;
};
pins2 {
+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+ };
+ };
+
+ sdmmc1_clk_pins_a: sdmmc1-clk-0 {
+ pins {
pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
- slew-rate = <2>;
+ slew-rate = <1>;
drive-push-pull;
bias-disable;
};
- pins3 {
- pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ };
+
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF10)>; /* SDMMC2_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
slew-rate = <1>;
drive-open-drain;
- bias-disable;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+ };
+ };
+
+ sdmmc2_clk_pins_a: sdmmc2-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
};
};
diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index 86126dc0d898..1708c79b5254 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -92,10 +92,10 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&intc>;
always-on;
};
@@ -115,15 +115,76 @@
status = "disabled";
};
+ dma1: dma-controller@48000000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48000000 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_pclk4>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ };
+
+ dma2: dma-controller@48001000 {
+ compatible = "st,stm32-dma";
+ reg = <0x48001000 0x400>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_pclk4>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ dma-requests = <8>;
+ };
+
+ dmamux1: dma-router@48002000 {
+ compatible = "st,stm32h7-dmamux";
+ reg = <0x48002000 0x40>;
+ clocks = <&clk_pclk4>;
+ #dma-cells = <3>;
+ dma-masters = <&dma1 &dma2>;
+ dma-requests = <128>;
+ dma-channels = <16>;
+ };
+
+ exti: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp13-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+ };
+
syscfg: syscon@50020000 {
compatible = "st,stm32mp157-syscfg", "syscon";
reg = <0x50020000 0x400>;
clocks = <&clk_pclk3>;
};
+ mdma: dma-controller@58000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x58000000 0x1000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_pclk4>;
+ #dma-cells = <5>;
+ dma-channels = <32>;
+ dma-requests = <48>;
+ };
+
sdmmc1: mmc@58005000 {
- compatible = "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x00253180>;
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
@@ -131,7 +192,21 @@
clock-names = "apb_pclk";
cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <120000000>;
+ max-frequency = <130000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: mmc@58007000 {
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x20253180>;
+ reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&clk_pll4_p>;
+ clock-names = "apb_pclk";
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <130000000>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index 7e96d9e36217..ee100d108ea2 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -38,9 +38,10 @@
};
&sdmmc1 {
- pinctrl-names = "default", "opendrain";
- pinctrl-0 = <&sdmmc1_b4_pins_a>;
- pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
broken-cd;
disable-wp;
st,neg-edge;
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 3b65130affec..f0d66d8c6e3b 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -338,6 +338,47 @@
};
};
+ ethernet0_rmii_pins_b: rmii-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 5, AF0)>, /* ETH1_CLK */
+ <STM32_PINMUX('C', 1, AF11)>, /* ETH1_MDC */
+ <STM32_PINMUX('G', 13, AF11)>, /* ETH1_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>; /* ETH1_TXD1 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH1_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('A', 7, AF11)>, /* ETH1_CRS_DV */
+ <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>; /* ETH1_RXD1 */
+ bias-disable;
+ };
+ pins4 {
+ pinmux = <STM32_PINMUX('B', 11, AF11)>; /* ETH1_TX_EN */
+ };
+ };
+
+ ethernet0_rmii_sleep_pins_b: rmii-sleep-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
+ <STM32_PINMUX('A', 7, ANALOG)>, /* ETH1_CRS_DV */
+ <STM32_PINMUX('B', 5, ANALOG)>, /* ETH1_CLK */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_TX_EN */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RXD1 */
+ <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_TXD0 */
+ <STM32_PINMUX('G', 14, ANALOG)>; /* ETH1_TXD1 */
+ };
+ };
+
fmc_pins_a: fmc-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
@@ -927,6 +968,21 @@
};
};
+ pwm1_pins_b: pwm1-1 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 9, AF1)>; /* TIM1_CH1 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm1_sleep_pins_b: pwm1-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 9, ANALOG)>; /* TIM1_CH1 */
+ };
+ };
+
pwm2_pins_a: pwm2-0 {
pins {
pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
@@ -1190,7 +1246,7 @@
};
};
- sai2a_sleep_pins_c: sai2a-2 {
+ sai2a_sleep_pins_c: sai2a-sleep-2 {
pins {
pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
<STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
@@ -2042,6 +2098,42 @@
};
};
+ usart3_pins_d: usart3-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 9, AF7)>, /* USART3_RX */
+ <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart3_idle_pins_d: usart3-idle-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+ <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 9, AF7)>; /* USART3_RX */
+ bias-disable;
+ };
+ };
+
+ usart3_sleep_pins_d: usart3-sleep-3 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+ <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
+ <STM32_PINMUX('D', 9, ANALOG)>; /* USART3_RX */
+ };
+ };
+
usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 1cfc2f011e70..f9aa9af31efd 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -45,10 +45,10 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&intc>;
};
@@ -455,6 +455,9 @@
interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc USART2_K>;
wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x15>,
+ <&dmamux1 44 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -464,6 +467,9 @@
interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc USART3_K>;
wakeup-source;
+ dmas = <&dmamux1 45 0x400 0x15>,
+ <&dmamux1 46 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -473,6 +479,9 @@
interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART4_K>;
wakeup-source;
+ dmas = <&dmamux1 63 0x400 0x15>,
+ <&dmamux1 64 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -482,6 +491,9 @@
interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART5_K>;
wakeup-source;
+ dmas = <&dmamux1 65 0x400 0x15>,
+ <&dmamux1 66 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -588,6 +600,9 @@
interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART7_K>;
wakeup-source;
+ dmas = <&dmamux1 79 0x400 0x15>,
+ <&dmamux1 80 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -597,6 +612,9 @@
interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART8_K>;
wakeup-source;
+ dmas = <&dmamux1 81 0x400 0x15>,
+ <&dmamux1 82 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -678,6 +696,9 @@
interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc USART6_K>;
wakeup-source;
+ dmas = <&dmamux1 71 0x400 0x15>,
+ <&dmamux1 72 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -1059,7 +1080,7 @@
};
sdmmc3: mmc@48004000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x48004000 0x400>;
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
@@ -1381,7 +1402,7 @@
};
sdmmc1: mmc@58005000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x58005000 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
@@ -1396,7 +1417,7 @@
};
sdmmc2: mmc@58007000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x58007000 0x1000>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
@@ -1560,7 +1581,7 @@
reg = <0x5c004000 0x400>;
clocks = <&rcc RTCAPB>, <&rcc RTC>;
clock-names = "pclk", "rtc_ck";
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi
index 1c1889b194cf..486084e0b80b 100644
--- a/arch/arm/boot/dts/stm32mp153.dtsi
+++ b/arch/arm/boot/dts/stm32mp153.dtsi
@@ -22,6 +22,13 @@
interrupt-affinity = <&cpu0>, <&cpu1>;
};
+ timer {
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
soc {
m_can1: can@4400e000 {
compatible = "bosch,m_can";
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
index d3058a036c74..1f75f1d45181 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
@@ -43,5 +43,7 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
index a797eaa917b7..ba92d7d8ed00 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
@@ -128,5 +128,7 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
index 70f394b4d3c0..6a5a4af25bd9 100644
--- a/arch/arm/boot/dts/stm32mp157a-iot-box.dts
+++ b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
@@ -58,6 +58,8 @@
/delete-property/st,hw-flow-ctrl;
cts-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
bluetooth {
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
index 5670b23812a2..fae656edd820 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -143,6 +143,8 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -150,5 +152,7 @@
&uart8 {
pinctrl-names = "default";
pinctrl-0 = <&uart8_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
index 7a75868164dc..b9d0d3d6ad15 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
@@ -44,6 +44,8 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -51,5 +53,7 @@
&uart8 {
pinctrl-names = "default";
pinctrl-0 = <&uart8_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index a4b14ef3caee..3a36f7fe0a2c 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -288,6 +288,8 @@
pinctrl-0 = <&usart2_pins_b>;
pinctrl-1 = <&usart2_sleep_pins_b>;
st,hw-flow-ctrl;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -296,6 +298,8 @@
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_c>;
st,hw-flow-ctrl;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -303,6 +307,8 @@
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_b>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 46b471d09c50..b1eb688a278a 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -384,6 +384,8 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts b/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts
new file mode 100644
index 000000000000..33b3f11d24bb
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (c) 2021 emtrion GmbH
+// Author: Reinhold Müller <reinhold.mueller@emtrion.de>.
+//
+
+/dts-v1/;
+
+#include "stm32mp157c-emstamp-argon.dtsi"
+
+/ {
+ model = "emtrion STM32MP157C emSBC-Argon Developer Board";
+ compatible = "emtrion,stm32mp157c-emsbc-argon", "emtrion,stm32mp157c-emstamp-argon",
+ "st,stm32mp157";
+
+ led: gpio_leds {
+ compatible = "gpio-leds";
+ led-2 {
+ label = "red";
+ gpios = <&gpiof 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ };
+ led-3 {
+ label = "green";
+ gpios = <&gpioe 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ };
+ };
+};
+
+&dac {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ disable-wp;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
new file mode 100644
index 000000000000..33ae5e0590df
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
@@ -0,0 +1,552 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (c) 2021 emtrion GmbH
+// Author: Reinhold Müller <reinhold.mueller@emtrion.de>.
+//
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+ aliases {
+ ethernet0 = &ethernet0;
+ serial0 = &uart4;
+ serial1 = &usart2;
+ serial2 = &usart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mcuram2: mcuram2@10000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10000000 0x40000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0@10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x2000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@10042000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10042000 0x2000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer@10044000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10044000 0x4000>;
+ no-map;
+ };
+
+ mcuram: mcuram@30000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x30000000 0x40000>;
+ no-map;
+ };
+
+ retram: retram@38000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x38000000 0x10000>;
+ no-map;
+ };
+
+ gpu_reserved: gpu@dc000000 {
+ reg = <0xdc000000 0x4000000>;
+ no-map;
+ };
+ };
+
+ led: gpio_leds {
+ compatible = "gpio-leds";
+ led-0 {
+ label = "panic";
+ gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ panic-indicator;
+ };
+ led-1 {
+ label = "heartbeat";
+ gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ };
+};
+
+&adc {
+ vdd-supply = <&vdd>;
+ vdda-supply = <&vdd>;
+ vref-supply = <&vrefbuf>;
+ status = "okay";
+
+ adc1: adc@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc1_in6_pins_a>;
+ st,min-sample-time-nsecs = <5000>;
+ st,adc-channels = <6>;
+ status = "disabled";
+ };
+
+ adc2: adc@100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ channel@12 {
+ reg = <12>;
+ label = "sense_temp";
+ st,min-sample-time-ns = <9000>;
+ };
+ channel@15 {
+ reg = <15>;
+ label = "vbat";
+ st,min-sample-time-ns = <9000>;
+ };
+ channel@16 {
+ reg = <16>;
+ label = "dac_out1";
+ st,min-sample-time-ns = <9000>;
+ };
+ channel@17 {
+ reg = <17>;
+ label = "dac_out1";
+ st,min-sample-time-ns = <9000>;
+ };
+ };
+};
+
+&crc1 {
+ status = "okay";
+};
+
+&cryp1 {
+ status = "okay";
+};
+
+&dac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+ vref-supply = <&vdda>;
+ status = "disabled";
+
+ dac1: dac@1 {
+ status = "okay";
+ };
+ dac2: dac@2 {
+ status = "okay";
+ };
+};
+
+&dts {
+ status = "okay";
+};
+
+&ethernet0 {
+ status = "okay";
+ snps,reset-gpio = <&gpioa 1 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 30000 50000>;
+ pinctrl-0 = <&ethernet0_rmii_pins_b>;
+ pinctrl-1 = <&ethernet0_rmii_sleep_pins_b>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rmii";
+ max-speed = <100>;
+ phy-handle = <&phy0>;
+ st,eth-ref-clk-sel;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&gpu {
+ contiguous-area = <&gpu_reserved>;
+};
+
+&hash1 {
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-1 = <&i2c1_sleep_pins_a>;
+ i2c-scl-rising-time-ns = <100>;
+ i2c-scl-falling-time-ns = <7>;
+ status = "disabled";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&i2c4 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c4_pins_a>;
+ pinctrl-1 = <&i2c4_sleep_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ ldo1-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ v1v8_audio: ldo1 {
+ regulator-name = "v1v8_audio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO1 0>;
+ };
+
+ v3v3_hdmi: ldo2 {
+ regulator-name = "v3v3_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO2 0>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ regulator-always-on;
+ };
+
+ vdda: ldo6 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO6 0>;
+ regulator-boot-on;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ regulator-active-discharge;
+ };
+
+ vbus_usbh: pwr_sw2 {
+ regulator-name = "usbh_vbus";
+ interrupts = <IT_OCP_SWOUT 0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&i2c5 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c5_pins_a>;
+ pinctrl-1 = <&i2c5_sleep_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&ipcc {
+ status = "okay";
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&m4_rproc {
+ memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+ <&vdev0vring1>, <&vdev0buffer>;
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+ mbox-names = "vq0", "vq1", "shutdown";
+ interrupt-parent = <&exti>;
+ interrupts = <68 1>;
+ interrupt-names = "wdg";
+ recovery;
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+ pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+ reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash0: is25lp016d@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <133000000>;
+ spi-rx-bus-width = <1>;
+ spi-tx-bus-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc2 {
+ arm,primecell-periphid = <0x10153180>;
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc2_b4_pins_b>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_b>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+ non-removable;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>;
+ cs-gpios = <&gpioz 3 0>;
+ status = "disabled";
+
+ spidev@0 {
+ compatible = "spidev";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ };
+};
+
+&timers1 {
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ pwm {
+ pinctrl-0 = <&pwm1_pins_b>;
+ pinctrl-1 = <&pwm1_sleep_pins_b>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@0 {
+ status = "okay";
+ };
+};
+
+&timers4 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ pwm {
+ pinctrl-0 = <&pwm4_pins_b>;
+ pinctrl-1 = <&pwm4_sleep_pins_b>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@3 {
+ status = "okay";
+ };
+};
+
+&timers5 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ pwm {
+ pinctrl-0 = <&pwm5_pins_a>;
+ pinctrl-1 = <&pwm5_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@4 {
+ status = "okay";
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ status = "okay";
+};
+
+&usart2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usart2_pins_a>;
+ pinctrl-1 = <&usart2_sleep_pins_a>;
+ status = "okay";
+};
+
+&usart3 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&usart3_pins_d>;
+ pinctrl-1 = <&usart3_sleep_pins_d>;
+ pinctrl-2 = <&usart3_idle_pins_d>;
+ status = "okay";
+};
+
+&usbh_ehci {
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
+ status = "okay";
+};
+
+&usbh_ohci {
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "peripheral";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ phy-names = "usb2-phy";
+ phys = <&usbphyc_port1 0>;
+ vbus-supply = <&vbus_otg>;
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
+
+&vrefbuf {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ vdda-supply = <&vdd>;
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index 1e9bf7eea0f1..e8d2ec41d537 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -248,5 +248,7 @@
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
index 554f5d3bcdc3..ed66d25b8bf3 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -81,6 +81,8 @@
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
index 4b10b013ffd5..35b1034aa3cf 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -131,6 +131,8 @@
&usart3 {
pinctrl-names = "default";
pinctrl-0 = <&usart3_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -144,6 +146,8 @@
pinctrl-names = "default";
pinctrl-0 = <&uart8_pins_a>;
rts-gpios = <&gpioe 6 GPIO_ACTIVE_HIGH>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index fbf3826933e4..5f586f024060 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -287,6 +287,8 @@
&usart3 {
pinctrl-names = "default";
pinctrl-0 = <&usart3_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -294,6 +296,8 @@
pinctrl-names = "default";
pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
uart-has-rtscts;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
index ba816ef8b9b2..abc595350e71 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
@@ -105,12 +105,16 @@
&usart3 {
pinctrl-names = "default";
pinctrl-0 = <&usart3_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
&uart8 {
pinctrl-names = "default";
pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 8c41f819f776..83e2c87713f8 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -196,7 +196,6 @@
"", "", "DHCOM-E", "",
"", "", "", "",
"", "", "", "";
- status = "okay";
};
&gpiod {
@@ -521,5 +520,7 @@
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 6885948f3024..61e17f44ce81 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -376,6 +376,8 @@
label = "LS-UART1";
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_b>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -385,6 +387,8 @@
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_a>;
uart-has-rtscts;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -394,6 +398,8 @@
pinctrl-0 = <&usart2_pins_a>;
pinctrl-1 = <&usart2_sleep_pins_a>;
st,hw-flow-ctrl;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
bluetooth {
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 44ecc4708587..6336c3ca0f0e 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -19,6 +19,48 @@
device_type = "memory";
reg = <0xc0000000 0x40000000>;
};
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mcuram2: mcuram2@10000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10000000 0x40000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0@10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x1000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@10041000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10041000 0x1000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer@10042000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10042000 0x4000>;
+ no-map;
+ };
+
+ mcuram: mcuram@30000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x30000000 0x40000>;
+ no-map;
+ };
+
+ retram: retram@38000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x38000000 0x10000>;
+ no-map;
+ };
+ };
};
&crc1 {
@@ -179,11 +221,25 @@
};
};
+&ipcc {
+ status = "okay";
+};
+
&iwdg2 {
timeout-sec = <32>;
status = "okay";
};
+&m4_rproc {
+ memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+ <&vdev0vring1>, <&vdev0buffer>;
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+ mbox-names = "vq0", "vq1", "shutdown";
+ interrupt-parent = <&exti>;
+ interrupts = <68 1>;
+ status = "okay";
+};
+
&pwr_regulators {
vdd-supply = <&vdd>;
vdd_3v3_usbfs-supply = <&vdd_usb>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 6caeb448c190..333c2af97130 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -650,6 +650,8 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -658,6 +660,8 @@
pinctrl-0 = <&uart7_pins_c>;
pinctrl-1 = <&uart7_sleep_pins_c>;
pinctrl-2 = <&uart7_idle_pins_c>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts b/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts
new file mode 100644
index 000000000000..097e479c2772
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Conley Lee
+ * Conley Lee <conleylee@foxmail.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "HAOYU Electronics Marsboard A20";
+ compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+};
+
+&ahci {
+ target-supply = <&reg_ahci_5v>;
+ status = "okay";
+};
+
+&codec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+ phy-handle = <&phy0>;
+ phy-mode = "mii";
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+ status = "okay";
+};
+
+&gmac_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ gmac_txerr: gmac-txerr-pin {
+ pins = "PA17";
+ function = "gmac";
+ };
+};
+
+&reg_ahci_5v {
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+ status = "okay";
+};
+
+&reg_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
index be49eabbff94..cd3df12b6573 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
@@ -103,12 +103,40 @@
};
};
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ vqmmc-supply = <&reg_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_vcc3v3>;
+ vddio-supply = <&reg_vcc3v3>;
+ device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+ host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+ shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ };
+};
+
&usbphy {
/* USB VBUS is always on */
status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
index 9f33f6fae595..df71fab3cf4e 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -45,6 +45,10 @@
/ {
model = "FriendlyARM NanoPi NEO";
compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+
+ aliases {
+ ethernet0 = &emac;
+ };
};
&ehci0 {
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 845f25235407..eac2349a2380 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -245,7 +245,7 @@
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
- thermal-sensors = <&ths 0>;
+ thermal-sensors = <&ths>;
trips {
cpu_hot_trip: cpu-hot {
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index b30bc1a25ebb..084323d5c61c 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -593,6 +593,17 @@
#size-cells = <0>;
};
+ gic: interrupt-controller@1c81000 {
+ compatible = "arm,gic-400";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x2000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
csi1: camera@1cb4000 {
compatible = "allwinner,sun8i-v3s-csi";
reg = <0x01cb4000 0x3000>;
@@ -604,16 +615,5 @@
resets = <&ccu RST_BUS_CSI>;
status = "disabled";
};
-
- gic: interrupt-controller@1c81000 {
- compatible = "arm,gic-400";
- reg = <0x01c81000 0x1000>,
- <0x01c82000 0x2000>,
- <0x01c84000 0x2000>,
- <0x01c86000 0x2000>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
};
};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 4aeca9e7e30d..d7e9f977f986 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -913,6 +913,19 @@
#size-cells = <0>;
};
+ r_uart: serial@1f02800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01f02800 0x400>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&r_ccu CLK_APB0_UART>;
+ resets = <&r_ccu RST_APB0_UART>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins>;
+ status = "disabled";
+ };
+
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
@@ -939,6 +952,11 @@
pins = "PL10";
function = "s_pwm";
};
+
+ r_uart_pins: r-uart-pins {
+ pins = "PL2", "PL3";
+ function = "s_uart";
+ };
};
r_pwm: pwm@1f03800 {
diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts
index 020172ee7340..a054d39db466 100644
--- a/arch/arm/boot/dts/tegra20-asus-tf101.dts
+++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts
@@ -436,17 +436,27 @@
};
};
+ spdif@70002400 {
+ status = "okay";
+
+ nvidia,fixed-parent-rate;
+ };
+
i2s@70002800 {
status = "okay";
+
+ nvidia,fixed-parent-rate;
};
serial@70006040 {
compatible = "nvidia,tegra20-hsuart";
+ /delete-property/ reg-shift;
/* GPS BCM4751 */
};
serial@70006200 {
compatible = "nvidia,tegra20-hsuart";
+ /delete-property/ reg-shift;
status = "okay";
/* Azurewave AW-NH615 BCM4329B1 */
@@ -756,7 +766,7 @@
lpddr2 {
compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
- revision-id1 = <1>;
+ revision-id = <1 0>;
density = <2048>;
io-width = <16>;
};
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
index 1eefb9ee4ac8..8ebd8afc857d 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -691,7 +691,7 @@
#address-cells = <1>;
#size-cells = <0>;
- asix@1 {
+ ethernet@1 {
compatible = "usbb95,772b";
reg = <1>;
local-mac-address = [00 00 00 00 00 00];
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index d53a175dc17a..0fb4b1f5bc1c 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -13,6 +13,8 @@
compatible = "compal,paz00", "nvidia,tegra20";
aliases {
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc1; /* MicroSD */
rtc0 = "/i2c@7000d000/tps6586x@34";
rtc1 = "/rtc@7000e000";
serial0 = &uarta;
@@ -558,7 +560,7 @@
status = "okay";
};
- mmc@c8000000 {
+ sdmmc1: mmc@c8000000 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
@@ -566,7 +568,7 @@
bus-width = <4>;
};
- mmc@c8000600 {
+ sdmmc4: mmc@c8000600 {
status = "okay";
bus-width = <8>;
non-removable;
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index de39c5465c0a..0e19bd0a847c 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -183,8 +183,8 @@
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
- "cdev1", "cdev2", "dap1", "dtb", "gma",
- "gmb", "gmc", "gmd", "gme", "gpu7",
+ "cdev1", "cdev2", "dap1", "dtb", "dtf",
+ "gma", "gmb", "gmc", "gmd", "gme", "gpu7",
"gpv", "i2cp", "irrx", "irtx", "pta",
"rm", "slxa", "slxk", "spia", "spib",
"uac";
@@ -203,7 +203,7 @@
};
conf_crtp {
nvidia,pins = "crtp", "dap2", "dap3", "dap4",
- "dtc", "dte", "dtf", "gpu", "sdio1",
+ "dtc", "dte", "gpu", "sdio1",
"slxc", "slxd", "spdi", "spdo", "spig",
"uda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/tegra30-asus-tf700t.dts b/arch/arm/boot/dts/tegra30-asus-tf700t.dts
index 18a9bfa5e97b..1a331dec3cfe 100644
--- a/arch/arm/boot/dts/tegra30-asus-tf700t.dts
+++ b/arch/arm/boot/dts/tegra30-asus-tf700t.dts
@@ -742,7 +742,7 @@
#address-cells = <1>;
#size-cells = <0>;
- dsi-bridge@7 {
+ dsi@7 {
compatible = "toshiba,tc358768";
reg = <0x7>;
diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
index 85b43a86a26d..c662ab261ed5 100644
--- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
@@ -1080,6 +1080,7 @@
serial@70006040 {
compatible = "nvidia,tegra30-hsuart";
+ /delete-property/ reg-shift;
status = "okay";
/* Broadcom GPS BCM47511 */
@@ -1087,6 +1088,7 @@
serial@70006200 {
compatible = "nvidia,tegra30-hsuart";
+ /delete-property/ reg-shift;
status = "okay";
nvidia,adjust-baud-rates = <0 9600 100>,
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index be691a1c33a1..22231d450b1b 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -960,7 +960,7 @@
#address-cells = <1>;
#size-cells = <0>;
- asix@1 {
+ ethernet@1 {
compatible = "usbb95,772b";
reg = <1>;
local-mac-address = [00 00 00 00 00 00];
diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts
index a5cfbab5f565..e58dda4f9d2c 100644
--- a/arch/arm/boot/dts/tegra30-ouya.dts
+++ b/arch/arm/boot/dts/tegra30-ouya.dts
@@ -4553,7 +4553,7 @@
#address-cells = <1>;
#size-cells = <0>;
- smsc@2 { /* SMSC 10/100T Ethernet Controller */
+ ethernet@2 { /* SMSC 10/100T Ethernet Controller */
compatible = "usb424,9e00";
reg = <2>;
local-mac-address = [00 11 22 33 44 55];
diff --git a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
index f4b2d4218849..8ce61035290b 100644
--- a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
+++ b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
@@ -1103,6 +1103,7 @@
uartb: serial@70006040 {
compatible = "nvidia,tegra30-hsuart";
+ /delete-property/ reg-shift;
status = "okay";
/* Broadcom GPS BCM47511 */
@@ -1110,6 +1111,7 @@
uartc: serial@70006200 {
compatible = "nvidia,tegra30-hsuart";
+ /delete-property/ reg-shift;
status = "okay";
nvidia,adjust-baud-rates = <0 9600 100>,
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index c12a1b8bc086..14c411f146f5 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -103,7 +103,7 @@
status = "okay";
/* M41T0M6 real time clock on carrier board */
- rtc: m41t0m6@68 {
+ rtc: rtc@68 {
compatible = "st,m41t0";
reg = <0x68>;
};