diff options
author | Konrad Dybcio <konrad.dybcio@somainline.org> | 2022-04-15 13:56:27 +0200 |
---|---|---|
committer | Bjorn Andersson <bjorn.andersson@linaro.org> | 2022-04-19 21:09:37 -0500 |
commit | f300826d27be7f7f671c922bf57007c98c683590 (patch) | |
tree | f8d71d33319c4cf69a672c95fe402ecfde352aff /arch/arm/boot/dts/qcom-msm8974.dtsi | |
parent | 2daa785817dd35172b856c30fc5148b2773b6891 (diff) | |
download | linux-f300826d27be7f7f671c922bf57007c98c683590.tar.bz2 |
ARM: dts: qcom-msm8974: Sort and clean up nodes
- Remove regulators from the SoC DTSI
- cpu_pmu{} -> pmu{}
- move modem/iris regulators out of here; only FP2 used them
- tcsr_mutex is moved out of /soc
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Rebased on top of Krzysztof's fixes]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-18-konrad.dybcio@somainline.org
Diffstat (limited to 'arch/arm/boot/dts/qcom-msm8974.dtsi')
-rw-r--r-- | arch/arm/boot/dts/qcom-msm8974.dtsi | 1358 |
1 files changed, 648 insertions, 710 deletions
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 606d1a57c39f..1799d204c409 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -14,57 +14,17 @@ #size-cells = <1>; interrupt-parent = <&intc>; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mpss_region: mpss@8000000 { - reg = <0x08000000 0x5100000>; - no-map; - }; - - mba_region: mba@d100000 { - reg = <0x0d100000 0x100000>; - no-map; - }; - - wcnss_region: wcnss@d200000 { - reg = <0x0d200000 0xa00000>; - no-map; - }; - - adsp_region: adsp@dc00000 { - reg = <0x0dc00000 0x1900000>; - no-map; - }; - - venus@f500000 { - reg = <0x0f500000 0x500000>; - no-map; - }; - - smem_region: smem@fa00000 { - reg = <0xfa00000 0x200000>; - no-map; - }; - - tz@fc00000 { - reg = <0x0fc00000 0x160000>; - no-map; - }; - - rfsa@fd60000 { - reg = <0x0fd60000 0x20000>; - no-map; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; }; - rmtfs@fd80000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0fd80000 0x180000>; - no-map; - - qcom,client-id = <1>; + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; }; @@ -134,211 +94,78 @@ }; }; + firmware { + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + memory { device_type = "memory"; reg = <0x0 0x0>; }; - thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 5>; - - trips { - cpu_alert0: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit0: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 6>; - - trips { - cpu_alert1: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit1: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + pmu { + compatible = "qcom,krait-pmu"; + interrupts = <GIC_PPI 7 0xf04>; + }; - thermal-sensors = <&tsens 7>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; - trips { - cpu_alert2: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit2: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; + mpss_region: mpss@8000000 { + reg = <0x08000000 0x5100000>; + no-map; }; - cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 8>; - - trips { - cpu_alert3: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit3: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; + mba_region: mba@d100000 { + reg = <0x0d100000 0x100000>; + no-map; }; - q6-dsp-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 1>; - - trips { - q6_dsp_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0xa00000>; + no-map; }; - modemtx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 2>; - - trips { - modemtx_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; }; - video-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 3>; - - trips { - video_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + venus_region: memory@f500000 { + reg = <0x0f500000 0x500000>; + no-map; }; - wlan-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 4>; - - trips { - wlan_alert0: trip-point0 { - temperature = <105000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; }; - gpu-top-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 9>; - - trips { - gpu1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + tz_region: memory@fc00000 { + reg = <0x0fc00000 0x160000>; + no-map; }; - gpu-bottom-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 10>; - - trips { - gpu2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + rfsa_mem: memory@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; }; - }; - - cpu-pmu { - compatible = "qcom,krait-pmu"; - interrupts = <GIC_PPI 7 0xf04>; - }; - clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - }; + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; + qcom,client-id = <1>; }; }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 2 0xf08>, - <GIC_PPI 3 0xf08>, - <GIC_PPI 4 0xf08>, - <GIC_PPI 1 0xf08>; - clock-frequency = <19200000>; - }; - smem { compatible = "qcom,smem"; @@ -465,11 +292,23 @@ }; }; - firmware { - scm { - compatible = "qcom,scm"; - clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; - clock-names = "core", "bus", "iface"; + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; }; }; @@ -492,31 +331,6 @@ reg = <0xf9011000 0x1000>; }; - qfprom: qfprom@fc4bc000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; - tsens_calib: calib@d0 { - reg = <0xd0 0x18>; - }; - tsens_backup: backup@440 { - reg = <0x440 0x10>; - }; - }; - - tsens: thermal-sensor@fc4a9000 { - compatible = "qcom,msm8974-tsens"; - reg = <0xfc4a9000 0x1000>, /* TM */ - <0xfc4a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_calib>, <&tsens_backup>; - nvmem-cell-names = "calib", "calib_backup"; - #qcom,sensors = <11>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; - #thermal-sensor-cells = <1>; - }; - timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -622,47 +436,53 @@ reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; - - gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8974"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x4000>; - }; + sdhc_1: sdhci@f9824900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <8>; + non-removable; - tcsr: syscon@fd4a0000 { - compatible = "syscon"; - reg = <0xfd4a0000 0x10000>; + status = "disabled"; }; - tcsr_mutex_block: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; - }; + sdhc_3: sdhci@f9864900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC3_APPS_CLK>, + <&gcc GCC_SDCC3_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <4>; - mmcc: clock-controller@fd8c0000 { - compatible = "qcom,mmcc-msm8974"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfd8c0000 0x6000>; + status = "disabled"; }; - tcsr_mutex: tcsr-mutex { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_block 0 0x80>; - - #hwlock-cells = <1>; - }; + sdhc_2: sdhci@f98a4900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <4>; - rpm_msg_ram: memory@fc428000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0xfc428000 0x4000>; + status = "disabled"; }; blsp1_uart1: serial@f991d000 { @@ -683,6 +503,60 @@ status = "disabled"; }; + blsp1_i2c1: i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c2: i2c@f9924000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9924000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c6: i2c@f9928000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9928000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + blsp2_uart1: serial@f995d000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995d000 0x1000>; @@ -710,53 +584,39 @@ status = "disabled"; }; - sdhc_1: sdhci@f9824900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; - bus-width = <8>; - non-removable; - + blsp2_i2c2: i2c@f9964000 { status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9964000 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; }; - sdhc_3: sdhci@f9864900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; - reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC3_APPS_CLK>, - <&gcc GCC_SDCC3_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; - bus-width = <4>; - + blsp2_i2c5: i2c@f9967000 { status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9967000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; }; - sdhc_2: sdhci@f98a4900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; - bus-width = <4>; - + blsp2_i2c6: i2c@f9968000 { status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9968000 0x1000>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; }; otg: usb@f9a55000 { @@ -810,55 +670,6 @@ clock-names = "core"; }; - remoteproc_mss: remoteproc@fc880000 { - compatible = "qcom,msm8974-mss-pil"; - reg = <0xfc880000 0x100>, <0xfc820000 0x020>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>, - <&xo_board>; - clock-names = "iface", "bus", "mem", "xo"; - - resets = <&gcc GCC_MSS_RESTART>; - reset-names = "mss_restart"; - - cx-supply = <&pm8841_s2>; - mss-supply = <&pm8841_s3>; - mx-supply = <&pm8841_s1>; - pll-supply = <&pm8941_l12>; - - qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - mba { - memory-region = <&mba_region>; - }; - - mpss { - memory-region = <&mpss_region>; - }; - - smd-edge { - interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; - - qcom,ipc = <&apcs 8 12>; - qcom,smd-edge = <0>; - - label = "modem"; - }; - }; - pronto: remoteproc@fb21b000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; @@ -873,8 +684,6 @@ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - vddpx-supply = <&pm8941_s3>; - qcom,smem-states = <&wcnss_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -885,11 +694,6 @@ clocks = <&rpmcc RPM_SMD_CXO_A2>; clock-names = "xo"; - - vddxo-supply = <&pm8941_l6>; - vddrfa-supply = <&pm8941_l11>; - vddpa-supply = <&pm8941_l19>; - vdddig-supply = <&pm8941_s3>; }; smd-edge { @@ -905,7 +709,7 @@ qcom,mmio = <&pronto>; - bluetooth { + bt { compatible = "qcom,wcnss-bt"; }; @@ -917,139 +721,32 @@ interrupt-names = "tx", "rx"; qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; - qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; }; }; }; }; - tlmm: pinctrl@fd510000 { - compatible = "qcom,msm8974-pinctrl"; - reg = <0xfd510000 0x4000>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - }; - - blsp1_i2c1: i2c@f9923000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9923000 0x1000>; - interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp1_i2c2: i2c@f9924000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9924000 0x1000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp1_i2c3: i2c@f9925000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9925000 0x1000>; - interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp1_i2c6: i2c@f9928000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9928000 0x1000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp2_i2c2: i2c@f9964000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9964000 0x1000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp2_i2c5: i2c@f9967000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9967000 0x1000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; - dma-names = "tx", "rx"; - }; - - blsp2_i2c6: i2c@f9968000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9968000 0x1000>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spmi_bus: spmi@fc4cf000 { - compatible = "qcom,spmi-pmic-arb"; - reg-names = "core", "intr", "cnfg"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - blsp2_dma: dma-controller@f9944000 { - compatible = "qcom,bam-v1.4.0"; - reg = <0xf9944000 0x19000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - etr@fc322000 { + etf@fc307000 { compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0xfc322000 0x1000>; + reg = <0xfc307000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + in-ports { port { - etr_in: endpoint { - remote-endpoint = <&replicator_out0>; + etf_in: endpoint { + remote-endpoint = <&merger_out>; }; }; }; @@ -1071,59 +768,39 @@ }; }; - replicator@fc31c000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0xfc31c000 0x1000>; + funnel@fc31a000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc31a000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - out-ports { + in-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { - reg = <0>; - replicator_out0: endpoint { - remote-endpoint = <&etr_in>; - }; - }; - port@1 { - reg = <1>; - replicator_out1: endpoint { - remote-endpoint = <&tpiu_in>; - }; - }; - }; - - in-ports { - port { - replicator_in: endpoint { - remote-endpoint = <&etf_out>; + /* + * Not described input ports: + * 0 - not-connected + * 1 - connected trought funnel to Multimedia CPU + * 2 - connected to Wireless CPU + * 3 - not-connected + * 4 - not-connected + * 6 - not-connected + * 7 - connected to STM + */ + port@5 { + reg = <5>; + funnel1_in5: endpoint { + remote-endpoint = <&kpss_out>; }; }; }; - }; - - etf@fc307000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0xfc307000 0x1000>; - - clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; out-ports { port { - etf_out: endpoint { - remote-endpoint = <&replicator_in>; - }; - }; - }; - - in-ports { - port { - etf_in: endpoint { - remote-endpoint = <&merger_out>; + funnel1_out: endpoint { + remote-endpoint = <&merger_in1>; }; }; }; @@ -1163,85 +840,51 @@ }; }; - funnel@fc31a000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0xfc31a000 0x1000>; + replicator@fc31c000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0xfc31c000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - in-ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* - * Not described input ports: - * 0 - not-connected - * 1 - connected trought funnel to Multimedia CPU - * 2 - connected to Wireless CPU - * 3 - not-connected - * 4 - not-connected - * 6 - not-connected - * 7 - connected to STM - */ - port@5 { - reg = <5>; - funnel1_in5: endpoint { - remote-endpoint = <&kpss_out>; + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; }; }; }; - out-ports { + in-ports { port { - funnel1_out: endpoint { - remote-endpoint = <&merger_in1>; + replicator_in: endpoint { + remote-endpoint = <&etf_out>; }; }; }; }; - funnel@fc345000 { /* KPSS funnel only 4 inputs are used */ - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0xfc345000 0x1000>; + etr@fc322000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc322000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - kpss_in0: endpoint { - remote-endpoint = <&etm0_out>; - }; - }; - port@1 { - reg = <1>; - kpss_in1: endpoint { - remote-endpoint = <&etm1_out>; - }; - }; - port@2 { - reg = <2>; - kpss_in2: endpoint { - remote-endpoint = <&etm2_out>; - }; - }; - port@3 { - reg = <3>; - kpss_in3: endpoint { - remote-endpoint = <&etm3_out>; - }; - }; - }; - - out-ports { port { - kpss_out: endpoint { - remote-endpoint = <&funnel1_in5>; + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; }; }; }; @@ -1319,23 +962,64 @@ }; }; - ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; + /* KPSS funnel, only 4 inputs are used */ + funnel@fc345000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc345000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - gmu_sram: gmu-sram@0 { - reg = <0x0 0x100000>; + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + kpss_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + kpss_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + kpss_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + kpss_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; }; + + out-ports { + port { + kpss_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; + }; + }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x4000>; + }; + + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; }; bimc: interconnect@fc380000 { @@ -1392,47 +1076,123 @@ <&rpmcc RPM_SMD_CNOC_A_CLK>; }; - gpu: adreno@fdb00000 { - status = "disabled"; + tsens: thermal-sensor@fc4a9000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #qcom,sensors = <11>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; - compatible = "qcom,adreno-330.1", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gmu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; - interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, - <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; - interconnect-names = "gfx-mem", - "ocmem"; + qfprom: qfprom@fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib@d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup@440 { + reg = <0x440 0x10>; + }; + }; - // iommus = <&gpu_iommu 0>; + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; - gpu_opp_table: opp_table { - compatible = "operating-points-v2"; + remoteproc_mss: remoteproc@fc880000 { + compatible = "qcom,msm8974-mss-pil"; + reg = <0xfc880000 0x100>, <0xfc820000 0x020>; + reg-names = "qdsp6", "rmb"; - opp-320000000 { - opp-hz = /bits/ 64 <320000000>; - }; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - }; + clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; - opp-27000000 { - opp-hz = /bits/ 64 <27000000>; - }; + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + mba { + memory-region = <&mba_region>; }; + + mpss { + memory-region = <&mpss_region>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; + }; + + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + tcsr: syscon@fd4a0000 { + compatible = "syscon"; + reg = <0xfd4a0000 0x10000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + }; + + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfd8c0000 0x6000>; }; mdss: mdss@fd900000 { @@ -1560,6 +1320,65 @@ }; }; + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-330.1", "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + clock-names = "core", "iface", "mem_iface"; + + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, + <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; + interconnect-names = "gfx-mem", "ocmem"; + + // iommus = <&gpu_iommu 0>; + + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; + }; + }; + }; + + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + remoteproc_adsp: remoteproc@fe200000 { compatible = "qcom,msm8974-adsp-pil"; reg = <0xfe200000 0x100>; @@ -1602,76 +1421,194 @@ }; }; - smd { - compatible = "qcom,smd"; + tcsr_mutex: tcsr-mutex { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>; - rpm { - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; + #hwlock-cells = <1>; + }; - rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; - #clock-cells = <1>; + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - pm8841-regulators { - compatible = "qcom,rpm-pm8841-regulators"; - - pm8841_s1: s1 {}; - pm8841_s2: s2 {}; - pm8841_s3: s3 {}; - pm8841_s4: s4 {}; - pm8841_s5: s5 {}; - pm8841_s6: s6 {}; - pm8841_s7: s7 {}; - pm8841_s8: s8 {}; + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - pm8941-regulators { - compatible = "qcom,rpm-pm8941-regulators"; - - pm8941_s1: s1 {}; - pm8941_s2: s2 {}; - pm8941_s3: s3 {}; - - pm8941_l1: l1 {}; - pm8941_l2: l2 {}; - pm8941_l3: l3 {}; - pm8941_l4: l4 {}; - pm8941_l5: l5 {}; - pm8941_l6: l6 {}; - pm8941_l7: l7 {}; - pm8941_l8: l8 {}; - pm8941_l9: l9 {}; - pm8941_l10: l10 {}; - pm8941_l11: l11 {}; - pm8941_l12: l12 {}; - pm8941_l13: l13 {}; - pm8941_l14: l14 {}; - pm8941_l15: l15 {}; - pm8941_l16: l16 {}; - pm8941_l17: l17 {}; - pm8941_l18: l18 {}; - pm8941_l19: l19 {}; - pm8941_l20: l20 {}; - pm8941_l21: l21 {}; - pm8941_l22: l22 {}; - pm8941_l23: l23 {}; - pm8941_l24: l24 {}; - - pm8941_lvs1: lvs1 {}; - pm8941_lvs2: lvs2 {}; - pm8941_lvs3: lvs3 {}; + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + video_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; }; }; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 4 0xf08>, + <GIC_PPI 1 0xf08>; + clock-frequency = <19200000>; + }; + vreg_boost: vreg-boost { compatible = "regulator-fixed"; @@ -1688,6 +1625,7 @@ pinctrl-names = "default"; pinctrl-0 = <&boost_bypass_n_pin>; }; + vreg_vph_pwr: vreg-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph-pwr"; |