Merge tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

More Qualcomm DTS updates for 6.2

This introduces support for the OnePlus One, on MSM8974Pro, and properly
marks other Pro devices as compatible thereof. Also on MSM8974, the
description of USB devices and their PHYs are cleaned up.

On the binding side compatibles for recently added ARM and ARM64 boards
are added.

* tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (102 commits)
  dt-bindings: arm: qcom: Add zombie
  ARM: dts: qcom: msm8974: Add OnePlus One
  dt-bindings: arm: qcom: Document oneplus,bacon device
  ARM: dts: qcom: msm8974: clean up USB nodes
  arm: dts: qcom: use qcom,msm8974pro for pro devices
  dt-bindings: arm: qcom: split MSM8974 Pro and MSM8974
  ARM: dts: qcom: align LED node names with dtschema
  dt-bindings: arm: qcom: Document additional sa8540p device
  dt-bindings: arm: qcom: Add Xperia 5 IV (PDX224)
  dt-bindings: arm: qcom: Document msm8956 and msm8976 SoC and devices
  dt-bindings: arm: add xiaomi,sagit board based on msm8998 chip
  dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible
  dt-bindings: arm: cpus: add qcom kryo 360 compatible
  ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schema
  ARM: dts: qcom-msm8960: use define for interrupt constants
  dt-bindings: arm: qcom: Document SM6375 & Xperia 10 IV
  ARM: dts: qcom-apq8060: align TLMM pin configuration with DT schema
  ARM: dts: qcom: msm8226: Add MMCC node
  dt-bindings: arm: qcom: Separate LTE/WIFI SKU for sc7280-evoker
  dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards
  ...

Link: https://lore.kernel.org/r/20221207153201.3233015-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 71 insertions, 78 deletions

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 942aa2278355..0da9623ea084 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -672,7 +672,7 @@
 			reg = <0x00c00000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pm8821: pmic@1 {
+			pm8821: pmic {
 				compatible = "qcom,pm8821";
 				interrupt-parent = <&tlmm_pinmux>;
 				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
@@ -693,12 +693,12 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic@0 {
+			pmicintc: pmic {
 				compatible = "qcom,pm8921";
 				interrupt-parent = <&tlmm_pinmux>;
 				interrupts = <74 8>;
@@ -884,7 +884,7 @@
 			reg = <0x2011000 0x1000>;
 		};
 
-		rpm@108000 {
+		rpm: rpm@108000 {
 			compatible = "qcom,rpm-apq8064";
 			reg = <0x108000 0x1000>;
 			qcom,ipc = <&l2cc 0x8 2>;
@@ -1085,15 +1085,21 @@
 			ports-implemented = <0x1>;
 		};
 
-		/* Temporary fixed regulator */
-		sdcc1bam: dma-controller@12402000{
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
+		sdcc3: mmc@12180000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12180000 0x2000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <192000000>;
+			no-1-8-v;
+			dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+			dma-names = "tx", "rx";
 		};
 
 		sdcc3bam: dma-controller@12182000{
@@ -1106,6 +1112,24 @@
 			qcom,ee = <0>;
 		};
 
+		sdcc4: mmc@121c0000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x121c0000 0x2000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <48000000>;
+			dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdc4_gpios>;
+		};
+
 		sdcc4bam: dma-controller@121c2000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x121c2000 0x8000>;
@@ -1116,67 +1140,33 @@
 			qcom,ee = <0>;
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: mmc@12400000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdcc1_pins>;
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12400000 0x2000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc3: mmc@12180000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12180000 0x2000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <192000000>;
-				no-1-8-v;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
+		sdcc1: mmc@12400000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdcc1_pins>;
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12400000 0x2000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <96000000>;
+			non-removable;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+		};
 
-			sdcc4: mmc@121c0000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x121c0000 0x2000>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <48000000>;
-				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdc4_gpios>;
-			};
+		sdcc1bam: dma-controller@12402000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
 		};
 
 		tcsr: syscon@1a400000 {
@@ -1316,7 +1306,6 @@
 						<&dsi0_phy 1>;
 			syscon-sfpb = <&mmss_sfpb>;
 			phys = <&dsi0_phy>;
-			phy-names = "dsi";
 			status = "disabled";
 
 			ports {
@@ -1338,7 +1327,7 @@
 		};
 
 
-		dsi0_phy: dsi-phy@4700200 {
+		dsi0_phy: phy@4700200 {
 			compatible = "qcom,dsi-phy-28nm-8960";
 			#clock-cells = <1>;
 			#phy-cells = <0>;
@@ -1470,6 +1459,8 @@
 
 			phys = <&hdmi_phy>;
 
+			status = "disabled";
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1488,7 +1479,7 @@
 			};
 		};
 
-		hdmi_phy: hdmi-phy@4a00400 {
+		hdmi_phy: phy@4a00400 {
 			compatible = "qcom,hdmi-phy-8960";
 			reg = <0x4a00400 0x60>,
 			      <0x4a00500 0x100>;
@@ -1498,6 +1489,8 @@
 			clocks = <&mmcc HDMI_S_AHB_CLK>;
 			clock-names = "slave_iface";
 			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		mdp: mdp@5100000 {
@@ -1552,7 +1545,7 @@
 			};
 		};
 
-		riva: riva-pil@3204000 {
+		riva: riva-pil@3200800 {
 			compatible = "qcom,riva-pil";
 
 			reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
@@ -1615,7 +1608,7 @@
 		};
 
 		etb@1a01000 {
-			compatible = "coresight-etb10", "arm,primecell";
+			compatible = "arm,coresight-etb10", "arm,primecell";
 			reg = <0x1a01000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>;