diff options
author | Arnd Bergmann <arnd@arndb.de> | 2021-12-23 00:17:17 +0100 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2021-12-23 00:18:45 +0100 |
commit | 8b0c59c622dc4dab970ec63264fb5b152944ac80 (patch) | |
tree | 21acae068e36f3428b7578b6199325c79daaceeb /arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | |
parent | d8db5d8a012b04d594d23eeca5430fb9298ea471 (diff) | |
download | linux-8b0c59c622dc4dab970ec63264fb5b152944ac80.tar.bz2 |
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
This reverts commit 3d2d52a0d1835b56f6bd67d268f6c39df0e41692, it caused
a build regression:
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:109.4-14: Warning (reg_format): /switch/ports:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #address-cells value
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #size-cells value
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts')
-rw-r--r-- | arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 77 |
1 files changed, 0 insertions, 77 deletions
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts index df8199fd4eb4..249476fdad7a 100644 --- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts @@ -93,83 +93,6 @@ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; }; - - switch { - compatible = "realtek,rtl8365mb"; - /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */ - mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; - mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; - reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; - realtek,disable-leds; - dsa,member = <1 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - port@0 { - reg = <0>; - label = "lan5"; - phy-handle = <ðphy0>; - }; - - port@1 { - reg = <1>; - label = "lan6"; - phy-handle = <ðphy1>; - }; - - port@2 { - reg = <2>; - label = "lan7"; - phy-handle = <ðphy2>; - }; - - port@3 { - reg = <3>; - label = "lan8"; - phy-handle = <ðphy3>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&sw0_p5>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <2000>; - rx-internal-delay-ps = <2100>; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; - }; - }; - - mdio { - compatible = "realtek,smi-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - - ethphy1: ethernet-phy@1 { - reg = <1>; - }; - - ethphy2: ethernet-phy@2 { - reg = <2>; - }; - - ethphy3: ethernet-phy@3 { - reg = <3>; - }; - }; - }; }; &srab { |