diff options
author | Suman Anna <s-anna@ti.com> | 2020-02-27 16:28:35 -0600 |
---|---|---|
committer | Tony Lindgren <tony@atomide.com> | 2020-03-04 08:15:54 -0800 |
commit | ce5ca149a6dcccee6060e08a162e837f5ebaaaa8 (patch) | |
tree | 0bb77abc481b2df1c9a3cb1745ab5322da8d9df4 /arch/arm/boot/dts/am33xx-l4.dtsi | |
parent | a3e2a6c85c9dd0e9baaf3da3c726b3c96af07a74 (diff) | |
download | linux-ce5ca149a6dcccee6060e08a162e837f5ebaaaa8.tar.bz2 |
ARM: dts: AM33xx-l4: Update PRUSS interconnect target-module node
The PRU-ICSS present on some AM33xx SoCs has a very unique SYSC
register. The IP also uses a hard-reset line, and requires this
PRCM reset to be deasserted to be able to access any registers.
Update the existing PRUSS interconnect target-module with all
the required properties.
The PRUSS device itself shall be added as a child node to this
interconnect node in the future. PRU-ICSS is not supported on
AM3351/AM3352/AM3354 SoCs though in the AM33xx family, so the
target module node should be disabled in derivative board files
that use any of these SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/boot/dts/am33xx-l4.dtsi')
-rw-r--r-- | arch/arm/boot/dts/am33xx-l4.dtsi | 21 |
1 files changed, 18 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 4e2986f0c604..5ed7f3c58c0f 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -759,12 +759,27 @@ ranges = <0x0 0x200000 0x80000>; }; - target-module@300000 { /* 0x4a300000, ap 9 04.0 */ - compatible = "ti,sysc"; - status = "disabled"; + pruss_tm: target-module@300000 { /* 0x4a300000, ap 9 04.0 */ + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x326000 0x4>, + <0x326004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_per 1>; + reset-names = "rstctrl"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x300000 0x80000>; + status = "disabled"; }; }; }; |