summaryrefslogtreecommitdiffstats
path: root/arch/arc/plat-axs10x
diff options
context:
space:
mode:
authorVineet Gupta <vgupta@synopsys.com>2015-03-09 14:33:40 +0530
committerVineet Gupta <vgupta@synopsys.com>2015-06-25 06:00:20 +0530
commit5fa2daaa8d8223d06fcdba171a7a668dc8e8b179 (patch)
tree5132e9df1f44b37430a15b28e4f60cfbf1c037be /arch/arc/plat-axs10x
parente0183f523025f96e2053200616a6d602ea2b3451 (diff)
downloadlinux-5fa2daaa8d8223d06fcdba171a7a668dc8e8b179.tar.bz2
ARCv2: [axs103] Support ARC SDP FPGA platform for HS38x cores
Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Diffstat (limited to 'arch/arc/plat-axs10x')
-rw-r--r--arch/arc/plat-axs10x/Kconfig13
-rw-r--r--arch/arc/plat-axs10x/axs10x.c198
2 files changed, 200 insertions, 11 deletions
diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig
index 45641ca8aba8..d475f9d4847c 100644
--- a/arch/arc/plat-axs10x/Kconfig
+++ b/arch/arc/plat-axs10x/Kconfig
@@ -6,7 +6,7 @@
# published by the Free Software Foundation.
#
-config ARC_PLAT_AXS10X
+menuconfig ARC_PLAT_AXS10X
bool "Synopsys ARC AXS10x Software Development Platforms"
select DW_APB_ICTL
select GPIO_DWAPB
@@ -23,6 +23,7 @@ config ARC_PLAT_AXS10X
if ARC_PLAT_AXS10X
config AXS101
+ depends on ISA_ARCOMPACT
bool "AXS101 with AXC001 CPU Card (ARC 770D/EM6/AS221)"
help
This adds support for the 770D/EM6/AS221 CPU Card. Only the ARC
@@ -32,4 +33,14 @@ config AXS101
this daughtercard. Please use the axs101.dts device tree
with this configuration.
+config AXS103
+ bool "AXS103 with AXC003 CPU Card (ARC HS38x)"
+ depends on ISA_ARCV2
+ help
+ This adds support for the HS38x CPU Card.
+
+ The AXS103 Platform consists of an AXS10x mainboard with
+ this daughtercard. Please use the axs103.dts device tree
+ with this configuration.
+
endif
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index a1cecdaf9dca..ad0a7ef84660 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -1,5 +1,5 @@
/*
- * AXS101 Software Development Platform
+ * AXS101/AXS103 Software Development Platform
*
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
*
@@ -15,8 +15,10 @@
*/
#include <linux/of_platform.h>
-#include <asm/mach_desc.h>
+#include <asm/clk.h>
#include <asm/io.h>
+#include <asm/mach_desc.h>
+#include <asm/mcip.h>
#define AXS_MB_CGU 0xE0010000
#define AXS_MB_CREG 0xE0011000
@@ -29,14 +31,6 @@
#define AXC001_CREG 0xF0001000
#define AXC001_GPIO_INTC 0xF0003000
-#define CREG_CPU_ADDR_770 (AXC001_CREG + 0x20)
-#define CREG_CPU_ADDR_TUNN (AXC001_CREG + 0x60)
-#define CREG_CPU_ADDR_770_UPD (AXC001_CREG + 0x34)
-#define CREG_CPU_ADDR_TUNN_UPD (AXC001_CREG + 0x74)
-
-#define CREG_CPU_ARC770_IRQ_MUX (AXC001_CREG + 0x114)
-#define CREG_CPU_GPIO_UART_MUX (AXC001_CREG + 0x120)
-
static void __init axs10x_enable_gpio_intc_wire(void)
{
/*
@@ -83,6 +77,22 @@ static void __init axs10x_enable_gpio_intc_wire(void)
iowrite32(1 << MB_TO_GPIO_IRQ, (void __iomem *) GPIO_INTEN);
}
+static inline void __init
+write_cgu_reg(uint32_t value, void __iomem *reg, void __iomem *lock_reg)
+{
+ unsigned int loops = 128 * 1024, ctr;
+
+ iowrite32(value, reg);
+
+ ctr = loops;
+ while (((ioread32(lock_reg) & 1) == 1) && ctr--) /* wait for unlock */
+ cpu_relax();
+
+ ctr = loops;
+ while (((ioread32(lock_reg) & 1) == 0) && ctr--) /* wait for re-lock */
+ cpu_relax();
+}
+
static void __init axs10x_print_board_ver(unsigned int creg, const char *str)
{
union ver {
@@ -118,6 +128,16 @@ static void __init axs10x_early_init(void)
axs10x_print_board_ver(CREG_MB_VER, mb);
}
+#ifdef CONFIG_AXS101
+
+#define CREG_CPU_ADDR_770 (AXC001_CREG + 0x20)
+#define CREG_CPU_ADDR_TUNN (AXC001_CREG + 0x60)
+#define CREG_CPU_ADDR_770_UPD (AXC001_CREG + 0x34)
+#define CREG_CPU_ADDR_TUNN_UPD (AXC001_CREG + 0x74)
+
+#define CREG_CPU_ARC770_IRQ_MUX (AXC001_CREG + 0x114)
+#define CREG_CPU_GPIO_UART_MUX (AXC001_CREG + 0x120)
+
/*
* Set up System Memory Map for ARC cpu / peripherals controllers
*
@@ -287,6 +307,145 @@ static void __init axs101_early_init(void)
axs10x_early_init();
}
+#endif /* CONFIG_AXS101 */
+
+#ifdef CONFIG_AXS103
+
+#define AXC003_CGU 0xF0000000
+#define AXC003_CREG 0xF0001000
+#define AXC003_MST_AXI_TUNNEL 0
+#define AXC003_MST_HS38 1
+
+#define CREG_CPU_AXI_M0_IRQ_MUX (AXC003_CREG + 0x440)
+#define CREG_CPU_GPIO_UART_MUX (AXC003_CREG + 0x480)
+#define CREG_CPU_TUN_IO_CTRL (AXC003_CREG + 0x494)
+
+
+union pll_reg {
+ struct {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ unsigned int pad:17, noupd:1, bypass:1, edge:1, high:6, low:6;
+#else
+ unsigned int low:6, high:6, edge:1, bypass:1, noupd:1, pad:17;
+#endif
+ };
+ unsigned int val;
+};
+
+static unsigned int __init axs103_get_freq(void)
+{
+ union pll_reg idiv, fbdiv, odiv;
+ unsigned int f = 33333333;
+
+ idiv.val = ioread32((void __iomem *)AXC003_CGU + 0x80 + 0);
+ fbdiv.val = ioread32((void __iomem *)AXC003_CGU + 0x80 + 4);
+ odiv.val = ioread32((void __iomem *)AXC003_CGU + 0x80 + 8);
+
+ if (idiv.bypass != 1)
+ f = f / (idiv.low + idiv.high);
+
+ if (fbdiv.bypass != 1)
+ f = f * (fbdiv.low + fbdiv.high);
+
+ if (odiv.bypass != 1)
+ f = f / (odiv.low + odiv.high);
+
+ f = (f + 500000) / 1000000; /* Rounding */
+ return f;
+}
+
+static inline unsigned int __init encode_div(unsigned int id, int upd)
+{
+ union pll_reg div;
+
+ div.val = 0;
+
+ div.noupd = !upd;
+ div.bypass = id == 1 ? 1 : 0;
+ div.edge = (id%2 == 0) ? 0 : 1; /* 0 = rising */
+ div.low = (id%2 == 0) ? id >> 1 : (id >> 1)+1;
+ div.high = id >> 1;
+
+ return div.val;
+}
+
+noinline static void __init
+axs103_set_freq(unsigned int id, unsigned int fd, unsigned int od)
+{
+ write_cgu_reg(encode_div(id, 0),
+ (void __iomem *)AXC003_CGU + 0x80 + 0,
+ (void __iomem *)AXC003_CGU + 0x110);
+
+ write_cgu_reg(encode_div(fd, 0),
+ (void __iomem *)AXC003_CGU + 0x80 + 4,
+ (void __iomem *)AXC003_CGU + 0x110);
+
+ write_cgu_reg(encode_div(od, 1),
+ (void __iomem *)AXC003_CGU + 0x80 + 8,
+ (void __iomem *)AXC003_CGU + 0x110);
+}
+
+static void __init axs103_early_init(void)
+{
+ switch (arc_get_core_freq()/1000000) {
+ case 33:
+ axs103_set_freq(1, 1, 1);
+ break;
+ case 50:
+ axs103_set_freq(1, 30, 20);
+ break;
+ case 75:
+ axs103_set_freq(2, 45, 10);
+ break;
+ case 90:
+ axs103_set_freq(2, 54, 10);
+ break;
+ case 100:
+ axs103_set_freq(1, 30, 10);
+ break;
+ case 125:
+ axs103_set_freq(2, 45, 6);
+ break;
+ default:
+ /*
+ * In this case, core_frequency derived from
+ * DT "clock-frequency" might not match with board value.
+ * Hence update it to match the board value.
+ */
+ arc_set_core_freq(axs103_get_freq() * 1000000);
+ break;
+ }
+
+ pr_info("Freq is %dMHz\n", axs103_get_freq());
+
+ /* Memory maps already config in pre-bootloader */
+
+ /* set GPIO mux to UART */
+ iowrite32(0x01, (void __iomem *) CREG_CPU_GPIO_UART_MUX);
+
+ iowrite32((0x00100000U | 0x000C0000U | 0x00003322U),
+ (void __iomem *) CREG_CPU_TUN_IO_CTRL);
+
+ /* Set up the AXS_MB interrupt system.*/
+ iowrite32(12, (void __iomem *) (CREG_CPU_AXI_M0_IRQ_MUX
+ + (AXC003_MST_HS38 << 2)));
+
+ /* connect ICTL - Main Board with GPIO line */
+ iowrite32(0x01, (void __iomem *) CREG_MB_IRQ_MUX);
+
+ axs10x_print_board_ver(AXC003_CREG + 4088, "AXC003 CPU Card");
+
+ axs10x_early_init();
+
+#ifdef CONFIG_ARC_MCIP
+ /* No Hardware init, but filling the smp ops callbacks */
+ mcip_init_early_smp();
+#endif
+}
+#endif
+
+#ifdef CONFIG_AXS101
+
static const char *axs101_compat[] __initconst = {
"snps,axs101",
NULL,
@@ -296,3 +455,22 @@ MACHINE_START(AXS101, "axs101")
.dt_compat = axs101_compat,
.init_early = axs101_early_init,
MACHINE_END
+
+#endif /* CONFIG_AXS101 */
+
+#ifdef CONFIG_AXS103
+
+static const char *axs103_compat[] __initconst = {
+ "snps,axs103",
+ NULL,
+};
+
+MACHINE_START(AXS103, "axs103")
+ .dt_compat = axs103_compat,
+ .init_early = axs103_early_init,
+#ifdef CONFIG_ARC_MCIP
+ .init_smp = mcip_init_smp,
+#endif
+MACHINE_END
+
+#endif /* CONFIG_AXS103 */