ARC: Disintegrate arcregs.h

* Move the various sub-system defines/types into relevant files/functions
  (reduces compilation time)

* move CPU specific stuff out of asm/tlb.h into asm/mmu.h

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

1 files changed, 0 insertions, 116 deletions

diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index 1b907c465666..20002c46e3bc 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -20,7 +20,6 @@
 #define ARC_REG_PERIBASE_BCR	0x69
 #define ARC_REG_FP_BCR		0x6B	/* Single-Precision FPU */
 #define ARC_REG_DPFP_BCR	0x6C	/* Dbl Precision FPU */
-#define ARC_REG_MMU_BCR		0x6f
 #define ARC_REG_DCCM_BCR	0x74	/* DCCM Present + SZ */
 #define ARC_REG_TIMERS_BCR	0x75
 #define ARC_REG_ICCM_BCR	0x78
@@ -34,22 +33,12 @@
 #define ARC_REG_D_UNCACH_BCR	0x6A
 
 /* status32 Bits Positions */
-#define STATUS_H_BIT		0	/* CPU Halted */
-#define STATUS_E1_BIT		1	/* Int 1 enable */
-#define STATUS_E2_BIT		2	/* Int 2 enable */
-#define STATUS_A1_BIT		3	/* Int 1 active */
-#define STATUS_A2_BIT		4	/* Int 2 active */
 #define STATUS_AE_BIT		5	/* Exception active */
 #define STATUS_DE_BIT		6	/* PC is in delay slot */
 #define STATUS_U_BIT		7	/* User/Kernel mode */
 #define STATUS_L_BIT		12	/* Loop inhibit */
 
 /* These masks correspond to the status word(STATUS_32) bits */
-#define STATUS_H_MASK		(1<<STATUS_H_BIT)
-#define STATUS_E1_MASK		(1<<STATUS_E1_BIT)
-#define STATUS_E2_MASK		(1<<STATUS_E2_BIT)
-#define STATUS_A1_MASK		(1<<STATUS_A1_BIT)
-#define STATUS_A2_MASK		(1<<STATUS_A2_BIT)
 #define STATUS_AE_MASK		(1<<STATUS_AE_BIT)
 #define STATUS_DE_MASK		(1<<STATUS_DE_BIT)
 #define STATUS_U_MASK		(1<<STATUS_U_BIT)
@@ -87,86 +76,7 @@
 /* Auxiliary registers */
 #define AUX_IDENTITY		4
 #define AUX_INTR_VEC_BASE	0x25
-#define AUX_IRQ_LEV		0x200	/* IRQ Priority: L1 or L2 */
-#define AUX_IRQ_HINT		0x201	/* For generating Soft Interrupts */
-#define AUX_IRQ_LV12		0x43	/* interrupt level register */
-
-#define AUX_IENABLE		0x40c
-#define AUX_ITRIGGER		0x40d
-#define AUX_IPULSE		0x415
-
-/* Timer related Aux registers */
-#define ARC_REG_TIMER0_LIMIT	0x23	/* timer 0 limit */
-#define ARC_REG_TIMER0_CTRL	0x22	/* timer 0 control */
-#define ARC_REG_TIMER0_CNT	0x21	/* timer 0 count */
-#define ARC_REG_TIMER1_LIMIT	0x102	/* timer 1 limit */
-#define ARC_REG_TIMER1_CTRL	0x101	/* timer 1 control */
-#define ARC_REG_TIMER1_CNT	0x100	/* timer 1 count */
-
-#define TIMER_CTRL_IE		(1 << 0) /* Interupt when Count reachs limit */
-#define TIMER_CTRL_NH		(1 << 1) /* Count only when CPU NOT halted */
-
-/* MMU Management regs */
-#define ARC_REG_TLBPD0		0x405
-#define ARC_REG_TLBPD1		0x406
-#define ARC_REG_TLBINDEX	0x407
-#define ARC_REG_TLBCOMMAND	0x408
-#define ARC_REG_PID		0x409
-#define ARC_REG_SCRATCH_DATA0	0x418
-
-/* Bits in MMU PID register */
-#define MMU_ENABLE		(1 << 31)	/* Enable MMU for process */
-
-/* Error code if probe fails */
-#define TLB_LKUP_ERR		0x80000000
-
-/* TLB Commands */
-#define TLBWrite    0x1
-#define TLBRead     0x2
-#define TLBGetIndex 0x3
-#define TLBProbe    0x4
-
-#if (CONFIG_ARC_MMU_VER >= 2)
-#define TLBWriteNI  0x5		/* write JTLB without inv uTLBs */
-#define TLBIVUTLB   0x6		/* explicitly inv uTLBs */
-#else
-#undef TLBWriteNI		/* These cmds don't exist on older MMU */
-#undef TLBIVUTLB
-#endif
-
-/* Instruction cache related Auxiliary registers */
-#define ARC_REG_IC_BCR		0x77	/* Build Config reg */
-#define ARC_REG_IC_IVIC		0x10
-#define ARC_REG_IC_CTRL		0x11
-#define ARC_REG_IC_IVIL		0x19
-#if (CONFIG_ARC_MMU_VER > 2)
-#define ARC_REG_IC_PTAG		0x1E
-#endif
-
-/* Bit val in IC_CTRL */
-#define IC_CTRL_CACHE_DISABLE   0x1
-
-/* Data cache related Auxiliary registers */
-#define ARC_REG_DC_BCR		0x72
-#define ARC_REG_DC_IVDC		0x47
-#define ARC_REG_DC_CTRL		0x48
-#define ARC_REG_DC_IVDL		0x4A
-#define ARC_REG_DC_FLSH		0x4B
-#define ARC_REG_DC_FLDL		0x4C
-#if (CONFIG_ARC_MMU_VER > 2)
-#define ARC_REG_DC_PTAG		0x5C
-#endif
 
-/* Bit val in DC_CTRL */
-#define DC_CTRL_INV_MODE_FLUSH  0x40
-#define DC_CTRL_FLUSH_STATUS    0x100
-
-/* MMU Management regs */
-#define ARC_REG_PID		0x409
-#define ARC_REG_SCRATCH_DATA0	0x418
-
-/* Bits in MMU PID register */
-#define MMU_ENABLE		(1 << 31)	/* Enable MMU for process */
 
 /*
  * Floating Pt Registers
@@ -293,24 +203,6 @@ struct bcr_identity {
 #endif
 };
 
-struct bcr_mmu_1_2 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int ver:8, ways:4, sets:4, u_itlb:8, u_dtlb:8;
-#else
-	unsigned int u_dtlb:8, u_itlb:8, sets:4, ways:4, ver:8;
-#endif
-};
-
-struct bcr_mmu_3 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int ver:8, ways:4, sets:4, osm:1, reserv:3, pg_sz:4,
-		     u_itlb:4, u_dtlb:4;
-#else
-	unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, reserv:3, osm:1, sets:4,
-		     ways:4, ver:8;
-#endif
-};
-
 #define EXTN_SWAP_VALID     0x1
 #define EXTN_NORM_VALID     0x2
 #define EXTN_MINMAX_VALID   0x2
@@ -343,14 +235,6 @@ struct bcr_extn_xymem {
 #endif
 };
 
-struct bcr_cache {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
-#else
-	unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
-#endif
-};
-
 struct bcr_perip {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int start:8, pad2:8, sz:8, pad:8;