Merge tag 'qcom-dt-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm into next/dt

Pull "Qualcomm ARM Based Device Tree Updates for v4.4" from Andy Gross:

* Add DT binding document for SMEM
* Add SMD, RPM, and Regulator nodes on MSM8974
* Remove extra reg element from iadc device
* Remove redunandant i2c pinctrl properties on APQ8064
* Remove unnecessary eeprom label on IFC6410
* Remove unnecessary eeprom label from QS600
* Add PM8921 RTC support on APQ8064
* Add PM8921 pwrkey support on APQ8064
* Prefix GSBI6 uart pins on APQ8064 correctly
* Add missing GSBI7 uart pinctrl on APQ8064
* Add missing GSBI7 uart pinctrl on IFC6410
* Add missing GSBI7 pinctrl uart property on QS600
* Add pwrseq support for WLAN on IFC6410
* Add pwrseq support for WLAN on QS600
* Add notify led support on IFC6410
* Add SD card detect support onQS600
* Add #power-domain-cells property to documentation
* Add Qualcomm SMBB binding document
* Add PM8941 charge node
* Fix typo in disabled property on MSM8974

* tag 'qcom-dt-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm:
  ARM: dts: msm8974: fix typo in "disabled" property
  ARM: dts: qcom-pm8941: Add charger node
  dt-binding: power: Add Qualcomm SMBB binding
  arm: dts: qcom: Add #power-domain-cells property
  ARM: dts: qs600: Add SD card detect support.
  ARM: dts: apq8064-ifc6410: add notify led support.
  ARM: dts: qs600: add pwrseq support to WLAN
  ARM: dts: ifc6410: Add pwrseq support for WLAN
  ARM: dts: qs600: Add missing pinctrl property for gsbi7 uart
  ARM: dts: ifc6410: Add missing pinctrl to gsbi7 uart
  ARM: dts: apq8064: add missing gsbi7 uart pinctrl
  ARM: dts: apq8064: Prefix the gsbi6 uart pins correctly
  ARM: dts: apq8064: add pm8921 pwrkey support
  ARM: dts: apq8064: add pm8921 rtc
  ARM: dts: qs600: remove unnecessary eeprom label
  ARM: dts: ifc6410: remove unnecessary eeprom label
  ARM: dts: apq8064: remove redundant i2c pinctrl properties
  ARM: dts: qcom: Remove extra reg element from iadc device
  ARM: dts: msm8974: Add smd, rpm and regulator nodes
  soc: qcom: Add device tree binding for SMEM

4 files changed, 196 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 54c23f34f194..152dfaab2575 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -18,10 +18,14 @@ Required properties :
 - #clock-cells : shall contain 1
 - #reset-cells : shall contain 1
 
+Optional properties :
+- #power-domain-cells : shall contain 1
+
 Example:
 	clock-controller@900000 {
 		compatible = "qcom,gcc-msm8960";
 		reg = <0x900000 0x4000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+		#power-domain-cells = <1>;
 	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
index 29ebf84d25af..34e7614d5074 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
@@ -14,10 +14,14 @@ Required properties :
 - #clock-cells : shall contain 1
 - #reset-cells : shall contain 1
 
+Optional properties :
+- #power-domain-cells : shall contain 1
+
 Example:
 	clock-controller@4000000 {
 		compatible = "qcom,mmcc-msm8960";
 		reg = <0x4000000 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+		#power-domain-cells = <1>;
 	};
diff --git a/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt b/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt
new file mode 100644
index 000000000000..65b88fac854b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt
@@ -0,0 +1,131 @@
+Qualcomm Switch-Mode Battery Charger and Boost
+
+PROPERTIES
+- compatible:
+  Usage: required
+  Value type: <stringlist>
+  Description: Must be one of:
+               - "qcom,pm8941-charger"
+
+- reg:
+  Usage: required
+  Value type: <prop-encoded-array>
+  Description: Base address of registers for SMBB block
+
+- interrupts:
+  Usage: required
+  Value type: <prop-encoded-array>
+  Description: The format of the specifier is defined by the binding document
+               describing the node's interrupt parent.  Must contain one
+               specifier for each of the following interrupts, in order:
+               - charge done
+               - charge fast mode
+               - charge trickle mode
+               - battery temperature ok
+               - battery present
+               - charger disconnected
+               - USB-in valid
+               - DC-in valid
+
+- interrupt-names:
+  Usage: required
+  Value type: <stringlist>
+  Description: Must contain the following list, strictly ordered:
+               "chg-done",
+               "chg-fast",
+               "chg-trkl",
+               "bat-temp-ok",
+               "bat-present",
+               "chg-gone",
+               "usb-valid",
+               "dc-valid"
+
+- qcom,fast-charge-current-limit:
+  Usage: optional (default: 1A, or pre-configured value)
+  Value type: <u32>; uA; range [100mA : 3A]
+  Description: Maximum charge current; May be clamped to safety limits.
+
+- qcom,fast-charge-low-threshold-voltage:
+  Usage: optional (default: 3.2V, or pre-configured value)
+  Value type: <u32>; uV; range [2.1V : 3.6V]
+  Description: Battery voltage limit above which fast charging may operate;
+               Below this value linear or switch-mode auto-trickle-charging
+               will operate.
+
+- qcom,fast-charge-high-threshold-voltage:
+  Usage: optional (default: 4.2V, or pre-configured value)
+  Value type: <u32>; uV; range [3.24V : 5V]
+  Description: Battery voltage limit below which fast charging may operate;
+               The fast charger will attempt to charge the battery to this
+               voltage.  May be clamped to safety limits.
+
+- qcom,fast-charge-safe-voltage:
+  Usage: optional (default: 4.2V, or pre-configured value)
+  Value type: <u32>; uV; range [3.24V : 5V]
+  Description: Maximum safe battery voltage; May be pre-set by bootloader, in
+               which case, setting this will harmlessly fail. The property
+               'fast-charge-high-watermark' will be clamped by this value.
+
+- qcom,fast-charge-safe-current:
+  Usage: optional (default: 1A, or pre-configured value)
+  Value type: <u32>; uA; range [100mA : 3A]
+  Description: Maximum safe battery charge current; May pre-set by bootloader,
+               in which case, setting this will harmlessly fail. The property
+               'qcom,fast-charge-current-limit' will be clamped by this value.
+
+- qcom,auto-recharge-threshold-voltage:
+  Usage: optional (default: 4.1V, or pre-configured value)
+  Value type: <u32>; uV; range [3.24V : 5V]
+  Description: Battery voltage limit below which auto-recharge functionality
+               will restart charging after end-of-charge;  The high cutoff
+               limit for auto-recharge is 5% above this value.
+
+- qcom,minimum-input-voltage:
+  Usage: optional (default: 4.3V, or pre-configured value)
+  Value type: <u32>; uV; range [4.2V : 9.6V]
+  Description: Input voltage level above which charging may operate
+
+- qcom,dc-current-limit:
+  Usage: optional (default: 100mA, or pre-configured value)
+  Value type: <u32>; uA; range [100mA : 2.5A]
+  Description: Default DC charge current limit
+
+- qcom,disable-dc:
+  Usage: optional (default: false)
+  Value type: boolean: <u32> or <empty>
+  Description: Disable DC charger
+
+- qcom,jeita-extended-temp-range:
+  Usage: optional (default: false)
+  Value type: boolean: <u32> or <empty>
+  Description: Enable JEITA extended temperature range;  This does *not*
+               adjust the maximum charge voltage or current in the extended
+               temperature range.  It only allows charging when the battery
+               is in the extended temperature range.  Voltage/current
+               regulation must be done externally to fully comply with
+               the JEITA safety guidelines if this flag is set.
+
+EXAMPLE
+charger@1000 {
+       compatible = "qcom,pm8941-charger";
+       reg = <0x1000 0x700>;
+       interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+                       <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+       interrupt-names = "chg-done",
+                       "chg-fast",
+                       "chg-trkl",
+                       "bat-temp-ok",
+                       "bat-present",
+                       "chg-gone",
+                       "usb-valid",
+                       "dc-valid";
+
+       qcom,fast-charge-current-limit = <1000000>;
+       qcom,dc-charge-current-limit = <1000000>;
+};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt
new file mode 100644
index 000000000000..9326cdf6e1b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt
@@ -0,0 +1,57 @@
+Qualcomm Shared Memory Manager binding
+
+This binding describes the Qualcomm Shared Memory Manager, used to share data
+between various subsystems and OSes in Qualcomm platforms.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be:
+		    "qcom,smem"
+
+- memory-region:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: handle to memory reservation for main SMEM memory region.
+
+- qcom,rpm-msg-ram:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: handle to RPM message memory resource
+
+- hwlocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to a hwspinlock used to protect allocations from
+		    the shared memory
+
+= EXAMPLE
+The following example shows the SMEM setup for MSM8974, with a main SMEM region
+at 0xfa00000 and the RPM message ram at 0xfc428000:
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_region: smem@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
+		};
+	};
+
+	smem@fa00000 {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_region>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc {
+		rpm_msg_ram: memory@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+	};