summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-02-22 19:23:14 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-02-22 19:23:14 -0800
commitbe5165a51d2500ae1afa1236a8b09858831fdf7e (patch)
treefde7b0072523dce999c74bd243f8b78f3efb5034 /Documentation
parentc1aac62f36c1e37ee81c9e09ee9ee733eef05dcb (diff)
parent4e29ccdb240ec833f172a34fcf405e077b51066b (diff)
downloadlinux-be5165a51d2500ae1afa1236a8b09858831fdf7e.tar.bz2
Merge tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring: "Pretty standard stuff with dtc upstream sync being the biggest piece. - Sync dtc to upstream commit 0931cea3ba20. This picks up overlay support in dtc. - Set dma_ops for reserved memory users. - Make references to IOMMU consistent in DT bindings. - Cleanup references to pm_power_off in bindings. - Move some display bindings that snuck into the old bindings/video/ path. - Fix some wrong documentation paths caused from binding restructuring. - Vendor prefixes for Faraday and Fujitsu. - Fix an of_node ref counting leak in of_find_node_opts_by_path - Introduce new graph helper of_graph_get_remote_node() which will be used by DRM drivers in 4.12" * tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (27 commits) DT: add Faraday Tec. as vendor of: introduce of_graph_get_remote_node of: Add missing space at end of pr_fmt(). of: make of_device_make_bus_id() static of: fix of_node leak caused in of_find_node_opts_by_path dt-bindings: net: remove reference to fixed link support dt-bindings: power: reset: qnap-poweroff: Drop reference to pm_power_off dt-bindings: power: reset: gpio-poweroff: Drop reference to pm_power_off dt-bindings: mfd: as3722: Drop reference to pm_power_off dt-bindings: display: move ANX7814 and SiI8620 bridge bindings of/unittest: Swap arguments of of_unittest_apply_overlay() Documentation: usb: fix wrong documentation paths serial: fsl-imx-uart.txt: Remove generic property devicetree: Add Fujitsu Ltd. vendor prefix Documentation: display: fix wrong documentation paths of: remove redundant memset in overlay bus:qcom : Fix typo in qcom,ebi2.txt dt-bindings: qman: Remove pool channel node Documentation: panel-dpi: fix path to display-timing.txt devicetree: bindings: clk: mvebu: fix description for sata1 on Armada XP ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/bus/qcom,ebi2.txt6
-rw-r--r--Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/display/arm,pl11x.txt2
-rw-r--r--Documentation/devicetree/bindings/display/bridge/analogix_dp.txt2
-rw-r--r--Documentation/devicetree/bindings/display/bridge/anx7814.txt (renamed from Documentation/devicetree/bindings/video/bridge/anx7814.txt)0
-rw-r--r--Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt (renamed from Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt)0
-rw-r--r--Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt2
-rw-r--r--Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt2
-rw-r--r--Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt2
-rw-r--r--Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt2
-rw-r--r--Documentation/devicetree/bindings/display/imx/ldb.txt2
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt2
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi.txt2
-rw-r--r--Documentation/devicetree/bindings/display/msm/edp.txt2
-rw-r--r--Documentation/devicetree/bindings/display/msm/hdmi.txt2
-rw-r--r--Documentation/devicetree/bindings/display/panel/panel-dpi.txt2
-rw-r--r--Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt2
-rw-r--r--Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt2
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt2
-rw-r--r--Documentation/devicetree/bindings/display/tilcdc/panel.txt2
-rw-r--r--Documentation/devicetree/bindings/iommu/arm,smmu.txt10
-rw-r--r--Documentation/devicetree/bindings/mfd/as3722.txt3
-rw-r--r--Documentation/devicetree/bindings/mfd/omap-usb-host.txt4
-rw-r--r--Documentation/devicetree/bindings/net/marvell-pp2.txt4
-rw-r--r--Documentation/devicetree/bindings/pci/pci-iommu.txt6
-rw-r--r--Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt10
-rw-r--r--Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt3
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-imx-uart.txt4
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/qman-portals.txt20
-rw-r--r--Documentation/devicetree/bindings/usb/ehci-omap.txt1
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt2
31 files changed, 43 insertions, 64 deletions
diff --git a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
index 920681f552db..5a7d567f6833 100644
--- a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
+++ b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
@@ -51,7 +51,7 @@ Required properties:
- compatible: should be one of:
"qcom,msm8660-ebi2"
"qcom,apq8060-ebi2"
-- #address-cells: shoule be <2>: the first cell is the chipselect,
+- #address-cells: should be <2>: the first cell is the chipselect,
the second cell is the offset inside the memory range
- #size-cells: should be <1>
- ranges: should be set to:
@@ -64,7 +64,7 @@ Required properties:
- reg: two ranges of registers: EBI2 config and XMEM config areas
- reg-names: should be "ebi2", "xmem"
- clocks: two clocks, EBI_2X and EBI
-- clock-names: shoule be "ebi2x", "ebi2"
+- clock-names: should be "ebi2x", "ebi2"
Optional subnodes:
- Nodes inside the EBI2 will be considered device nodes.
@@ -100,7 +100,7 @@ Optional properties arrays for FAST chip selects:
assertion, with respect to the cycle where ADV (address valid) is asserted.
2 means 2 cycles between ADV and OE. Valid values 0, 1, 2 or 3.
- qcom,xmem-read-hold-cycles: the length in cycles of the first segment of a
- read transfer. For a single read trandfer this will be the time from CS
+ read transfer. For a single read transfer this will be the time from CS
assertion to OE assertion. Valid values 0 thru 15.
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index cb8542d910b3..5142efc8099d 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -117,7 +117,7 @@ ID Clock Peripheral
25 tdm Time Division Mplx
28 xor1 XOR DMA 1
29 sata1lnk
-30 sata1 SATA Host 0
+30 sata1 SATA Host 1
The following is a list of provided IDs for Dove:
ID Clock Peripheral
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt
index 3e3039a8a253..ef89ab46b2c9 100644
--- a/Documentation/devicetree/bindings/display/arm,pl11x.txt
+++ b/Documentation/devicetree/bindings/display/arm,pl11x.txt
@@ -22,7 +22,7 @@ Required properties:
- clocks: contains phandle and clock specifier pairs for the entries
in the clock-names property. See
- Documentation/devicetree/binding/clock/clock-bindings.txt
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
Optional properties:
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 4a0f4f7682ad..0c7473dd0e51 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -33,7 +33,7 @@ Optional properties for dp-controller:
in Documentation/devicetree/bindings/media/video-interfaces.txt,
please refer to the SoC specific binding document:
* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
- * Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+ * Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-------------------------------------------------------------------------------
diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
index b2a22c28c9b3..b2a22c28c9b3 100644
--- a/Documentation/devicetree/bindings/video/bridge/anx7814.txt
+++ b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
diff --git a/Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
index 9409d9c6a260..9409d9c6a260 100644
--- a/Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
diff --git a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
index e9c65746e2f1..b0e506610400 100644
--- a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
+++ b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
@@ -6,7 +6,7 @@ Required properties:
location and size of the framebuffer memory.
- clocks : phandle + clock specifier pair of the FB reference clock.
- display : phandle to a display node as described in
- Documentation/devicetree/bindings/display/display-timing.txt.
+ Documentation/devicetree/bindings/display/panel/display-timing.txt.
Additionally, the display node has to define properties:
- bits-per-pixel: Bits per pixel.
- ac-prescale : LCD AC bias frequency. This frequency is the required
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
index 3938caacf11c..027d6c210f7e 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
@@ -38,7 +38,7 @@ Optional Properties:
Can be used in case timings cannot be provided otherwise
or to override timings provided by the panel.
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
Example:
diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
index c7c6b9af87ac..18645e0228b0 100644
--- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
+++ b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
@@ -83,7 +83,7 @@ in [2]. The following are properties specific to those nodes:
3 - for parallel output,
4 - for write-back interface
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
index 00d5f8ea7ec6..7a5c0e204c8e 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
@@ -9,7 +9,7 @@ Required properties:
Required nodes:
- display: Phandle to a display node as described in
- Documentation/devicetree/bindings/display/display-timing.txt
+ Documentation/devicetree/bindings/display/panel/display-timing.txt
Additional, the display node has to define properties:
- bits-per-pixel: Bits per pixel
- fsl,pcr: LCDC PCR value
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
index a407462c885e..38c637fa39dd 100644
--- a/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -64,7 +64,7 @@ Required properties:
Optional properties (required if display-timings are used):
- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
- display-timings : A node that describes the display timings as defined in
- Documentation/devicetree/bindings/display/display-timing.txt.
+ Documentation/devicetree/bindings/display/panel/display-timing.txt.
- fsl,data-mapping : should be "spwg" or "jeida"
This describes how the color bits are laid out in the
serialized LVDS signal.
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index db6e77edbea8..708f5664a316 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -55,7 +55,7 @@ Required properties (DMA function blocks):
"mediatek,<chip>-disp-rdma"
"mediatek,<chip>-disp-wdma"
- larb: Should contain a phandle pointing to the local arbiter device as defined
- in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
+ in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- iommus: Should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index 6b1cab17f52d..fa00e62e1cf6 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -108,7 +108,7 @@ Optional properties:
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
regulator is wanted.
-[1] Documentation/devicetree/bindings/clocks/clock-bindings.txt
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/graph.txt
[3] Documentation/devicetree/bindings/media/video-interfaces.txt
[4] Documentation/devicetree/bindings/display/panel/
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt
index 3a20f6ea5898..e63032be5401 100644
--- a/Documentation/devicetree/bindings/display/msm/edp.txt
+++ b/Documentation/devicetree/bindings/display/msm/edp.txt
@@ -10,7 +10,7 @@ Required properties:
- interrupts: The interrupt signal from the eDP block.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: device clocks
- See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
- clock-names: the following clocks are required:
* "core_clk"
* "iface_clk"
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
index 2ad578984fcf..2d306f402d18 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
@@ -49,7 +49,7 @@ Required properties:
* "hdmi_tx_l4"
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: device clocks
- See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
- core-vdda-supply: phandle to vdda regulator device node
Example:
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
index b52ac52757df..d4add13e592d 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
+++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
@@ -12,7 +12,7 @@ Optional properties:
Required nodes:
- "panel-timing" containing video timings
- (Documentation/devicetree/bindings/display/display-timing.txt)
+ (Documentation/devicetree/bindings/display/panel/display-timing.txt)
- Video port for DPI input
Example
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
index fc595d9b985b..354d4d1df4ff 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
@@ -20,7 +20,7 @@ The device node can contain one 'port' child node with one child
'endpoint' node, according to the bindings defined in [3]. This
node should describe panel's video bus.
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
[2]: Documentation/devicetree/bindings/spi/spi-bus.txt
[3]: Documentation/devicetree/bindings/media/video-interfaces.txt
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
index 25701c81b5e0..9e766c5f86da 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
@@ -21,7 +21,7 @@ The device node can contain one 'port' child node with one child
'endpoint' node, according to the bindings defined in [2]. This
node should describe panel's video bus.
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index 01cced1c2a18..47665a12786f 100644
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -35,7 +35,7 @@ Optional property for different chips:
Required elements: "grf"
For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+ * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
- phys (required)
- phy-names (required)
- hpd-gpios (optional)
diff --git a/Documentation/devicetree/bindings/display/tilcdc/panel.txt b/Documentation/devicetree/bindings/display/tilcdc/panel.txt
index f20b31cdc59a..808216310ea2 100644
--- a/Documentation/devicetree/bindings/display/tilcdc/panel.txt
+++ b/Documentation/devicetree/bindings/display/tilcdc/panel.txt
@@ -15,7 +15,7 @@ Required properties:
- display-timings: typical videomode of lcd panel. Multiple video modes
can be listed if the panel supports multiple timings, but the 'native-mode'
should be the preferred/default resolution. Refer to
- Documentation/devicetree/bindings/display/display-timing.txt for display
+ Documentation/devicetree/bindings/display/panel/display-timing.txt for display
timing binding details.
Optional properties:
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
index e862d1485205..6cdf32d037fc 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
@@ -36,15 +36,15 @@ conditions.
combined interrupt, it must be listed multiple times.
- #iommu-cells : See Documentation/devicetree/bindings/iommu/iommu.txt
- for details. With a value of 1, each "iommus" entry
+ for details. With a value of 1, each IOMMU specifier
represents a distinct stream ID emitted by that device
into the relevant SMMU.
SMMUs with stream matching support and complex masters
- may use a value of 2, where the second cell represents
- an SMR mask to combine with the ID in the first cell.
- Care must be taken to ensure the set of matched IDs
- does not result in conflicts.
+ may use a value of 2, where the second cell of the
+ IOMMU specifier represents an SMR mask to combine with
+ the ID in the first cell. Care must be taken to ensure
+ the set of matched IDs does not result in conflicts.
** System MMU optional properties:
diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt
index 4f64b2a73169..0b2a6099aa20 100644
--- a/Documentation/devicetree/bindings/mfd/as3722.txt
+++ b/Documentation/devicetree/bindings/mfd/as3722.txt
@@ -122,8 +122,7 @@ Following are properties of regulator subnode.
Power-off:
=========
-AS3722 supports the system power off by turning off all its rail. This
-is provided through pm_power_off.
+AS3722 supports the system power off by turning off all its rails.
The device node should have the following properties to enable this
functionality
ams,system-power-controller: Boolean, to enable the power off functionality
diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
index 4721b2d521e4..aa1eaa59581b 100644
--- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
@@ -64,8 +64,8 @@ Required properties if child node exists:
Properties for children:
The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
-See Documentation/devicetree/bindings/usb/omap-ehci.txt and
-omap3-ohci.txt
+See Documentation/devicetree/bindings/usb/ehci-omap.txt and
+Documentation/devicetree/bindings/usb/ohci-omap3.txt.
Example for OMAP4:
diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
index aa4f4230bfd7..4754364df4c6 100644
--- a/Documentation/devicetree/bindings/net/marvell-pp2.txt
+++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt
@@ -27,9 +27,7 @@ Optional properties (port):
- marvell,loopback: port is loopback mode
- phy: a phandle to a phy node defining the PHY address (as the reg
- property, a single integer). Note: if this property isn't present,
- then fixed link is assumed, and the 'fixed-link' property is
- mandatory.
+ property, a single integer).
Example:
diff --git a/Documentation/devicetree/bindings/pci/pci-iommu.txt b/Documentation/devicetree/bindings/pci/pci-iommu.txt
index 56c829621b9a..0def586fdcdf 100644
--- a/Documentation/devicetree/bindings/pci/pci-iommu.txt
+++ b/Documentation/devicetree/bindings/pci/pci-iommu.txt
@@ -32,17 +32,17 @@ PCI root complex
Optional properties
-------------------
-- iommu-map: Maps a Requester ID to an IOMMU and associated iommu-specifier
+- iommu-map: Maps a Requester ID to an IOMMU and associated IOMMU specifier
data.
The property is an arbitrary number of tuples of
(rid-base,iommu,iommu-base,length).
Any RID r in the interval [rid-base, rid-base + length) is associated with
- the listed IOMMU, with the iommu-specifier (r - rid-base + iommu-base).
+ the listed IOMMU, with the IOMMU specifier (r - rid-base + iommu-base).
- iommu-map-mask: A mask to be applied to each Requester ID prior to being
- mapped to an iommu-specifier per the iommu-map property.
+ mapped to an IOMMU specifier per the iommu-map property.
Example (1)
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt
index d4eab9227ea4..e62d53d844cc 100644
--- a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt
+++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt
@@ -2,12 +2,12 @@ Driver a GPIO line that can be used to turn the power off.
The driver supports both level triggered and edge triggered power off.
At driver load time, the driver will request the given gpio line and
-install a pm_power_off handler. If the optional properties 'input' is
-not found, the GPIO line will be driven in the inactive
+install a handler to power off the system. If the optional properties
+'input' is not found, the GPIO line will be driven in the inactive
state. Otherwise its configured as an input.
-When the pm_power_off is called, the gpio is configured as an output,
-and drive active, so triggering a level triggered power off
+When the power-off handler is called, the gpio is configured as an
+output, and drive active, so triggering a level triggered power off
condition. This will also cause an inactive->active edge condition, so
triggering positive edge triggered power off. After a delay of 100ms,
the GPIO is set to inactive, thus causing an active->inactive edge,
@@ -24,7 +24,7 @@ Required properties:
Optional properties:
- input : Initially configure the GPIO line as an input. Only reconfigure
- it to an output when the pm_power_off function is called. If this optional
+ it to an output when the power-off handler is called. If this optional
property is not specified, the GPIO is initialized as an output in its
inactive state.
diff --git a/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt
index af25e77c0e0c..c363d7173129 100644
--- a/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt
@@ -3,8 +3,7 @@
QNAP NAS devices have a microcontroller controlling the main power
supply. This microcontroller is connected to UART1 of the Kirkwood and
Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
-microcontroller to turn the power off. This driver adds a handler to
-pm_power_off which is called to turn the power off.
+microcontroller to turn the power off.
Synology NAS devices use a similar scheme, but a different baud rate,
9600, and a different character, '1'.
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
index 1e82802d8e32..574c3a2c77d5 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
@@ -6,11 +6,13 @@ Required properties:
- interrupts : Should contain uart interrupt
Optional properties:
-- uart-has-rtscts : Indicate the uart has rts and cts
- fsl,irda-mode : Indicate the uart supports irda mode
- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
in DCE mode by default.
+Please check Documentation/devicetree/bindings/serial/serial.txt
+for the complete list of generic properties.
+
Note: Each uart controller should have an alias correctly numbered
in "aliases" node.
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
index 47e46ccbc170..5a34f3ab7bea 100644
--- a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
@@ -5,7 +5,6 @@ Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
CONTENTS
- QMan Portal
- - QMan Pool Channel
- Example
QMan Portal Node
@@ -82,25 +81,6 @@ These subnodes should have the following properties:
Definition: The phandle to the particular hardware device that this
portal is connected to.
-DPAA QMan Pool Channel Nodes
-
-Pool Channels are defined with the following properties.
-
-PROPERTIES
-
-- compatible
- Usage: Required
- Value type: <stringlist>
- Definition: Must include "fsl,qman-pool-channel"
- May include "fsl,<SoC>-qman-pool-channel"
-
-- fsl,qman-channel-id
- Usage: Required
- Value type: <u32>
- Definition: The hardware index of the channel. This can also be
- determined by dividing any of the channel's 8 work queue
- IDs by 8
-
EXAMPLE
The example below shows a (P4080) QMan portals container/bus node with two portals
diff --git a/Documentation/devicetree/bindings/usb/ehci-omap.txt b/Documentation/devicetree/bindings/usb/ehci-omap.txt
index 3dc231c832b0..d77e11a975a2 100644
--- a/Documentation/devicetree/bindings/usb/ehci-omap.txt
+++ b/Documentation/devicetree/bindings/usb/ehci-omap.txt
@@ -29,4 +29,3 @@ usbhsehci: ehci@4a064c00 {
&usbhsehci {
phys = <&hsusb1_phy 0 &hsusb3_phy>;
};
-
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index cf1c36616507..1d0bb2c9def4 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -104,11 +104,13 @@ everest Everest Semiconductor Co. Ltd.
everspin Everspin Technologies, Inc.
excito Excito
ezchip EZchip Semiconductor
+faraday Faraday Technology Corporation
fcs Fairchild Semiconductor
firefly Firefly
focaltech FocalTech Systems Co.,Ltd
friendlyarm Guangzhou FriendlyARM Computer Tech Co., Ltd
fsl Freescale Semiconductor
+fujitsu Fujitsu Ltd.
ge General Electric Company
geekbuying GeekBuying
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.