Support HDMI audio on NVIDIA Tegra20

Merge series from Dmitry Osipenko <digetx@gmail.com>:

This series revives Tegra20 S/PDIF driver which was upstreamed long time
ago, but never was used. It also turns Tegra DRM HDMI driver into HDMI
audio CODEC provider. Finally, HDMI audio is enabled in device-trees.
For now the audio is enable only for Acer A500 tablet and Toshiba AC100
netbook because they're already supported by upstream, later on ASUS TF101
tablet will join them.

I based S/PDIF patches on Arnd's Bergmann patch from a separate series [1]
that removes obsolete slave_id. This eases merging of the patches by
removing the merge conflict. This is a note for Mark Brown.

I also based this series on top of power management series [2]. I.e. [2]
should be applied first, otherwise "Add S/PDIF node to Tegra20 device-tree"
patch should have merge conflict. This is a note for Thierry.

[1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=273312
[2] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=274534

Changelog:

v4: - Added patches that update multi_v7_defconfig with the enabled S/PDIF
      and APB DMA drivers.

v3: - Renamed S/PDIF device-tree clocks as was suggested by Rob Herring.

    - Added r-bs and acks that were given by Rob Herring to v2.

v2: - Corrected I2S yaml problem that was reported by the DT bot for v1
      by removing the non-existent required clock-names property.

    - Removed assigned-clocks property from S/PDIF yaml since this property
      is now inherited from the clocks property.

    - Reordered the "tegra20: spdif: Set FIFO trigger level" patch, making
      it the first sound/soc patch in the series, like it was suggested by
      Mark Brown in the comment to v1. Also reworded commit message of this
      patch to *not* make it looks like it should be backported to stable
      kernels.

Arnd Bergmann (1):
  ASoC: tegra20-spdif: stop setting slave_id

Dmitry Osipenko (21):
  ASoC: dt-bindings: Add binding for Tegra20 S/PDIF
  ASoC: dt-bindings: tegra20-i2s: Convert to schema
  ASoC: dt-bindings: tegra20-i2s: Document new nvidia,fixed-parent-rate
    property
  dt-bindings: host1x: Document optional HDMI sound-dai-cells
  ASoC: tegra20: spdif: Set FIFO trigger level
  ASoC: tegra20: spdif: Support device-tree
  ASoC: tegra20: spdif: Improve driver's code
  ASoC: tegra20: spdif: Use more resource-managed helpers
  ASoC: tegra20: spdif: Reset hardware
  ASoC: tegra20: spdif: Support system suspend
  ASoC: tegra20: spdif: Filter out unsupported rates
  ASoC: tegra20: i2s: Filter out unsupported rates
  drm/tegra: hdmi: Unwind tegra_hdmi_init() errors
  drm/tegra: hdmi: Register audio CODEC on Tegra20
  ARM: tegra_defconfig: Enable S/PDIF driver
  ARM: config: multi v7: Enable NVIDIA Tegra20 S/PDIF driver
  ARM: config: multi v7: Enable NVIDIA Tegra20 APB DMA driver
  ARM: tegra: Add S/PDIF node to Tegra20 device-tree
  ARM: tegra: Add HDMI audio graph to Tegra20 device-tree
  ARM: tegra: acer-a500: Enable S/PDIF and HDMI audio
  ARM: tegra: paz00: Enable S/PDIF and HDMI audio

 .../display/tegra/nvidia,tegra20-host1x.txt   |   1 +
 .../bindings/sound/nvidia,tegra20-i2s.txt     |  30 ---
 .../bindings/sound/nvidia,tegra20-i2s.yaml    |  77 +++++++
 .../bindings/sound/nvidia,tegra20-spdif.yaml  |  85 ++++++++
 .../boot/dts/tegra20-acer-a500-picasso.dts    |   8 +
 arch/arm/boot/dts/tegra20-paz00.dts           |   8 +
 arch/arm/boot/dts/tegra20.dtsi                |  40 +++-
 arch/arm/configs/multi_v7_defconfig           |   2 +
 arch/arm/configs/tegra_defconfig              |   1 +
 drivers/gpu/drm/tegra/Kconfig                 |   3 +
 drivers/gpu/drm/tegra/hdmi.c                  | 168 +++++++++++++--
 sound/soc/tegra/tegra20_i2s.c                 |  49 +++++
 sound/soc/tegra/tegra20_spdif.c               | 197 ++++++++++++------
 sound/soc/tegra/tegra20_spdif.h               |   1 +
 sound/soc/tegra/tegra_pcm.c                   |   6 +
 sound/soc/tegra/tegra_pcm.h                   |   1 +
 16 files changed, 574 insertions(+), 103 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml

--
2.33.1

3 files changed, 162 insertions, 30 deletions

diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
deleted file mode 100644
index dc30c6bfbe95..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-NVIDIA Tegra 20 I2S controller
-
-Required properties:
-- compatible : "nvidia,tegra20-i2s"
-- reg : Should contain I2S registers location and length
-- interrupts : Should contain I2S interrupt
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - i2s
-- dmas : Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names : Must include the following entries:
-  - rx
-  - tx
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-
-Example:
-
-i2s@70002800 {
-	compatible = "nvidia,tegra20-i2s";
-	reg = <0x70002800 0x200>;
-	interrupts = < 45 >;
-	clocks = <&tegra_car 11>;
-	resets = <&tegra_car 11>;
-	reset-names = "i2s";
-	dmas = <&apbdma 21>, <&apbdma 21>;
-	dma-names = "rx", "tx";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
new file mode 100644
index 000000000000..68ae124eaf80
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 I2S Controller
+
+description: |
+  The I2S Controller streams synchronous serial audio data between system
+  memory and an external audio device. The controller supports the I2S Left
+  Justified Mode, Right Justified Mode, and DSP mode formats.
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-i2s
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: i2s
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  dmas:
+    minItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  nvidia,fixed-parent-rate:
+    description: |
+      Specifies whether board prefers parent clock to stay at a fixed rate.
+      This allows multiple Tegra20 audio components work simultaneously by
+      limiting number of supportable audio rates.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+  - interrupts
+  - clocks
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    i2s@70002800 {
+        compatible = "nvidia,tegra20-i2s";
+        reg = <0x70002800 0x200>;
+        interrupts = <45>;
+        clocks = <&tegra_car 11>;
+        resets = <&tegra_car 11>;
+        reset-names = "i2s";
+        dmas = <&apbdma 21>, <&apbdma 21>;
+        dma-names = "rx", "tx";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml
new file mode 100644
index 000000000000..60a368a132b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 S/PDIF Controller
+
+description: |
+  The S/PDIF controller supports both input and output in serial audio
+  digital interface format. The input controller can digitally recover
+  a clock from the received stream. The S/PDIF controller is also used
+  to generate the embedded audio for HDMI output channel.
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-spdif
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: out
+      - const: in
+
+  dmas:
+    minItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  "#sound-dai-cells":
+    const: 0
+
+  nvidia,fixed-parent-rate:
+    description: |
+      Specifies whether board prefers parent clock to stay at a fixed rate.
+      This allows multiple Tegra20 audio components work simultaneously by
+      limiting number of supportable audio rates.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - resets
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    spdif@70002400 {
+        compatible = "nvidia,tegra20-spdif";
+        reg = <0x70002400 0x200>;
+        interrupts = <77>;
+        clocks = <&clk 99>, <&clk 98>;
+        clock-names = "out", "in";
+        resets = <&rst 10>;
+        dmas = <&apbdma 3>, <&apbdma 3>;
+        dma-names = "rx", "tx";
+        #sound-dai-cells = <0>;
+    };
+
+...