Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into next

Pull KVM updates from Paolo Bonzini:
 "At over 200 commits, covering almost all supported architectures, this
  was a pretty active cycle for KVM.  Changes include:

   - a lot of s390 changes: optimizations, support for migration, GDB
     support and more

   - ARM changes are pretty small: support for the PSCI 0.2 hypercall
     interface on both the guest and the host (the latter acked by
     Catalin)

   - initial POWER8 and little-endian host support

   - support for running u-boot on embedded POWER targets

   - pretty large changes to MIPS too, completing the userspace
     interface and improving the handling of virtualized timer hardware

   - for x86, a larger set of changes is scheduled for 3.17.  Still, we
     have a few emulator bugfixes and support for running nested
     fully-virtualized Xen guests (para-virtualized Xen guests have
     always worked).  And some optimizations too.

  The only missing architecture here is ia64.  It's not a coincidence
  that support for KVM on ia64 is scheduled for removal in 3.17"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits)
  KVM: add missing cleanup_srcu_struct
  KVM: PPC: Book3S PR: Rework SLB switching code
  KVM: PPC: Book3S PR: Use SLB entry 0
  KVM: PPC: Book3S HV: Fix machine check delivery to guest
  KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs
  KVM: PPC: Book3S HV: Make sure we don't miss dirty pages
  KVM: PPC: Book3S HV: Fix dirty map for hugepages
  KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address
  KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates()
  KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number
  KVM: PPC: Book3S: Add ONE_REG register names that were missed
  KVM: PPC: Add CAP to indicate hcall fixes
  KVM: PPC: MPIC: Reset IRQ source private members
  KVM: PPC: Graciously fail broken LE hypercalls
  PPC: ePAPR: Fix hypercall on LE guest
  KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler
  KVM: PPC: BOOK3S: Always use the saved DAR value
  PPC: KVM: Make NX bit available with magic page
  KVM: PPC: Disable NX for old magic page using guests
  KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest
  ...

5 files changed, 107 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/arm/psci.txt b/Documentation/devicetree/bindings/arm/psci.txt
index 433afe9cb590..b4a58f39223c 100644
--- a/Documentation/devicetree/bindings/arm/psci.txt
+++ b/Documentation/devicetree/bindings/arm/psci.txt
@@ -21,7 +21,15 @@ to #0.
 
 Main node required properties:
 
- - compatible    : Must be "arm,psci"
+ - compatible    : should contain at least one of:
+
+				 * "arm,psci" : for implementations complying to PSCI versions prior to
+					0.2. For these cases function IDs must be provided.
+
+				 * "arm,psci-0.2" : for implementations complying to PSCI 0.2. Function
+					IDs are not required and should be ignored by an OS with PSCI 0.2
+					support, but are permitted to be present for compatibility with
+					existing software when "arm,psci" is later in the compatible list.
 
  - method        : The method of calling the PSCI firmware. Permitted
                    values are:
@@ -45,6 +53,8 @@ Main node optional properties:
 
 Example:
 
+Case 1: PSCI v0.1 only.
+
 	psci {
 		compatible	= "arm,psci";
 		method		= "smc";
@@ -53,3 +63,28 @@ Example:
 		cpu_on		= <0x95c10002>;
 		migrate		= <0x95c10003>;
 	};
+
+
+Case 2: PSCI v0.2 only
+
+	psci {
+		compatible	= "arm,psci-0.2";
+		method		= "smc";
+	};
+
+Case 3: PSCI v0.2 and PSCI v0.1.
+
+	A DTB may provide IDs for use by kernels without PSCI 0.2 support,
+	enabling firmware and hypervisors to support existing and new kernels.
+	These IDs will be ignored by kernels with PSCI 0.2 support, which will
+	use the standard PSCI 0.2 IDs exclusively.
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "hvc";
+
+		cpu_on = < arbitrary value >;
+		cpu_off = < arbitrary value >;
+
+		...
+	};
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index b4f53653c106..75f20c6038a9 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1794,6 +1794,11 @@ registers, find a list below:
   PPC   | KVM_REG_PPC_MMCR0     | 64
   PPC   | KVM_REG_PPC_MMCR1     | 64
   PPC   | KVM_REG_PPC_MMCRA     | 64
+  PPC   | KVM_REG_PPC_MMCR2     | 64
+  PPC   | KVM_REG_PPC_MMCRS     | 64
+  PPC   | KVM_REG_PPC_SIAR      | 64
+  PPC   | KVM_REG_PPC_SDAR      | 64
+  PPC   | KVM_REG_PPC_SIER      | 64
   PPC   | KVM_REG_PPC_PMC1      | 32
   PPC   | KVM_REG_PPC_PMC2      | 32
   PPC   | KVM_REG_PPC_PMC3      | 32
@@ -1868,6 +1873,7 @@ registers, find a list below:
   PPC   | KVM_REG_PPC_PPR	| 64
   PPC   | KVM_REG_PPC_ARCH_COMPAT 32
   PPC   | KVM_REG_PPC_DABRX     | 32
+  PPC   | KVM_REG_PPC_WORT      | 64
   PPC   | KVM_REG_PPC_TM_GPR0	| 64
           ...
   PPC   | KVM_REG_PPC_TM_GPR31	| 64
@@ -2211,6 +2217,8 @@ KVM_S390_SIGP_STOP (vcpu) - sigp restart
 KVM_S390_PROGRAM_INT (vcpu) - program check; code in parm
 KVM_S390_SIGP_SET_PREFIX (vcpu) - sigp set prefix; prefix address in parm
 KVM_S390_RESTART (vcpu) - restart
+KVM_S390_INT_CLOCK_COMP (vcpu) - clock comparator interrupt
+KVM_S390_INT_CPU_TIMER (vcpu) - CPU timer interrupt
 KVM_S390_INT_VIRTIO (vm) - virtio external interrupt; external interrupt
 			   parameters in parm and parm64
 KVM_S390_INT_SERVICE (vm) - sclp external interrupt; sclp parameter in parm
@@ -2314,8 +2322,8 @@ struct kvm_create_device {
 
 4.80 KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR
 
-Capability: KVM_CAP_DEVICE_CTRL
-Type: device ioctl
+Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device
+Type: device ioctl, vm ioctl
 Parameters: struct kvm_device_attr
 Returns: 0 on success, -1 on error
 Errors:
@@ -2340,8 +2348,8 @@ struct kvm_device_attr {
 
 4.81 KVM_HAS_DEVICE_ATTR
 
-Capability: KVM_CAP_DEVICE_CTRL
-Type: device ioctl
+Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device
+Type: device ioctl, vm ioctl
 Parameters: struct kvm_device_attr
 Returns: 0 on success, -1 on error
 Errors:
@@ -2376,6 +2384,8 @@ Possible features:
 	  Depends on KVM_CAP_ARM_PSCI.
 	- KVM_ARM_VCPU_EL1_32BIT: Starts the CPU in a 32bit mode.
 	  Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only).
+	- KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 for the CPU.
+	  Depends on KVM_CAP_ARM_PSCI_0_2.
 
 
 4.83 KVM_ARM_PREFERRED_TARGET
@@ -2738,6 +2748,21 @@ It gets triggered whenever both KVM_CAP_PPC_EPR are enabled and an
 external interrupt has just been delivered into the guest. User space
 should put the acknowledged interrupt vector into the 'epr' field.
 
+		/* KVM_EXIT_SYSTEM_EVENT */
+		struct {
+#define KVM_SYSTEM_EVENT_SHUTDOWN       1
+#define KVM_SYSTEM_EVENT_RESET          2
+			__u32 type;
+			__u64 flags;
+		} system_event;
+
+If exit_reason is KVM_EXIT_SYSTEM_EVENT then the vcpu has triggered
+a system-level event using some architecture specific mechanism (hypercall
+or some special instruction). In case of ARM/ARM64, this is triggered using
+HVC instruction based PSCI call from the vcpu. The 'type' field describes
+the system-level event type. The 'flags' field describes architecture
+specific flags for the system-level event.
+
 		/* Fix the size of the union. */
 		char padding[256];
 	};
diff --git a/Documentation/virtual/kvm/devices/vm.txt b/Documentation/virtual/kvm/devices/vm.txt
new file mode 100644
index 000000000000..0d16f96c0eac
--- /dev/null
+++ b/Documentation/virtual/kvm/devices/vm.txt
@@ -0,0 +1,26 @@
+Generic vm interface
+====================================
+
+The virtual machine "device" also accepts the ioctls KVM_SET_DEVICE_ATTR,
+KVM_GET_DEVICE_ATTR, and KVM_HAS_DEVICE_ATTR. The interface uses the same
+struct kvm_device_attr as other devices, but targets VM-wide settings
+and controls.
+
+The groups and attributes per virtual machine, if any, are architecture
+specific.
+
+1. GROUP: KVM_S390_VM_MEM_CTRL
+Architectures: s390
+
+1.1. ATTRIBUTE: KVM_S390_VM_MEM_CTRL
+Parameters: none
+Returns: -EBUSY if already a vcpus is defined, otherwise 0
+
+Enables CMMA for the virtual machine
+
+1.2. ATTRIBUTE: KVM_S390_VM_CLR_CMMA
+Parameteres: none
+Returns: 0
+
+Clear the CMMA status for all guest pages, so any pages the guest marked
+as unused are again used any may not be reclaimed by the host.
diff --git a/Documentation/virtual/kvm/ppc-pv.txt b/Documentation/virtual/kvm/ppc-pv.txt
index 4643cde517c4..319560646f32 100644
--- a/Documentation/virtual/kvm/ppc-pv.txt
+++ b/Documentation/virtual/kvm/ppc-pv.txt
@@ -94,10 +94,24 @@ a bitmap of available features inside the magic page.
 The following enhancements to the magic page are currently available:
 
   KVM_MAGIC_FEAT_SR		Maps SR registers r/w in the magic page
+  KVM_MAGIC_FEAT_MAS0_TO_SPRG7	Maps MASn, ESR, PIR and high SPRGs
 
 For enhanced features in the magic page, please check for the existence of the
 feature before using them!
 
+Magic page flags
+================
+
+In addition to features that indicate whether a host is capable of a particular
+feature we also have a channel for a guest to tell the guest whether it's capable
+of something. This is what we call "flags".
+
+Flags are passed to the host in the low 12 bits of the Effective Address.
+
+The following flags are currently available for a guest to expose:
+
+  MAGIC_PAGE_FLAG_NOT_MAPPED_NX Guest handles NX bits correclty wrt magic page
+
 MSR bits
 ========
 
diff --git a/Documentation/virtual/kvm/s390-diag.txt b/Documentation/virtual/kvm/s390-diag.txt
index f1de4fbade15..48c4921794ed 100644
--- a/Documentation/virtual/kvm/s390-diag.txt
+++ b/Documentation/virtual/kvm/s390-diag.txt
@@ -78,3 +78,5 @@ DIAGNOSE function code 'X'501 - KVM breakpoint
 
 If the function code specifies 0x501, breakpoint functions may be performed.
 This function code is handled by userspace.
+
+This diagnose function code has no subfunctions and uses no parameters.