summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-07-03 11:40:58 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-07-03 11:40:58 -0700
commita6e6d863cf68bba886acfe47dbdc8f245cce588f (patch)
treecf6a408da597c5e39def6a28c38d117c5899eef8 /Documentation
parent60b5adffb4f3e4b4c1978959f24e8e531b2ef3cb (diff)
parent7bc8c4c37aea74332b16ffb5412a8ad355d508ce (diff)
downloadlinux-a6e6d863cf68bba886acfe47dbdc8f245cce588f.tar.bz2
Merge tag 'regmap-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown: "A small but useful set of regmap updates this time around: - An abstraction for bitfields within a register map contributed by Srinivas Kandagatla, allowing drivers to cope more easily when hardware designers randomly move things about (mainly when talking to things like system controllers). - Changes from Lars-Peter Clausen to allow the MMIO regmap to be used from hard IRQ context. - Small improvements to the cache infrastructure and performance, including a default cache sync operation so now all regmaps can sync easily. There's also a pinctrl driver making use of the new bitfield API, merged here for dependency reasons. There will be a simple add/add conflict with the pinctrl tree as a result." * tag 'regmap-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: pinctrl: st: Remove unnecessary use of of_match_ptr macro pinctrl: st: fix return value check pinctrl: st: Add pinctrl and pinconf support. regmap: debugfs: Suppress cache for partial register files regmap: Add regmap_field APIs regmap: core: Cache all registers by default when cache is enabled regmap: Implemented default cache sync operation regmap: Make regmap-mmio usable from atomic contexts regmap: regcache: Fixup locking for custom lock callbacks regmap: debugfs: Fix return from regmap_debugfs_get_dump_start regmap: debugfs: Don't mark lockdep as broken due to debugfs write regmap: rbtree: Use range information to allocate nodes regmap: rbtree: Factor out node allocation regmap: Make regmap_check_range_table() a public API regmap: Add support for discarding parts of the register cache
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt110
1 files changed, 110 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
new file mode 100644
index 000000000000..05bf82a07dfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
@@ -0,0 +1,110 @@
+*ST pin controller.
+
+Each multi-function pin is controlled, driven and routed through the
+PIO multiplexing block. Each pin supports GPIO functionality (ALT0)
+and multiple alternate functions(ALT1 - ALTx) that directly connect
+the pin to different hardware blocks.
+
+When a pin is in GPIO mode, Output Enable (OE), Open Drain(OD), and
+Pull Up (PU) are driven by the related PIO block.
+
+ST pinctrl driver controls PIO multiplexing block and also interacts with
+gpio driver to configure a pin.
+
+Required properties: (PIO multiplexing block)
+- compatible : should be "st,<SOC>-<pio-block>-pinctrl"
+ like st,stih415-sbc-pinctrl, st,stih415-front-pinctrl and so on.
+- gpio-controller : Indicates this device is a GPIO controller
+- #gpio-cells : Should be one. The first cell is the pin number.
+- st,retime-pin-mask : Should be mask to specify which pins can be retimed.
+ If the property is not present, it is assumed that all the pins in the
+ bank are capable of retiming. Retiming is mainly used to improve the
+ IO timing margins of external synchronous interfaces.
+- st,bank-name : Should be a name string for this bank as
+ specified in datasheet.
+- st,syscfg : Should be a phandle of the syscfg node.
+
+Example:
+ pin-controller-sbc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih415-sbc-pinctrl";
+ st,syscfg = <&syscfg_sbc>;
+ ranges = <0 0xfe610000 0x5000>;
+ PIO0: gpio@fe610000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO0";
+ };
+ ...
+ pin-functions nodes follow...
+ };
+
+
+Contents of function subnode node:
+----------------------
+Required properties for pin configuration node:
+- st,pins : Child node with list of pins with configuration.
+
+Below is the format of how each pin conf should look like.
+
+<bank offset mux mode rt_type rt_delay rt_clk>
+
+Every PIO is represented with 4-7 parameters depending on retime configuration.
+Each parameter is explained as below.
+
+-bank : Should be bank phandle to which this PIO belongs.
+-offset : Offset in the PIO bank.
+-mux : Should be alternate function number associated this pin.
+ Use same numbers from datasheet.
+-mode :pin configuration is selected from one of the below values.
+ IN
+ IN_PU
+ OUT
+ BIDIR
+ BIDIR_PU
+
+-rt_type Retiming Configuration for the pin.
+ Possible retime configuration are:
+
+ ------- -------------
+ value args
+ ------- -------------
+ NICLK <delay> <clk>
+ ICLK_IO <delay> <clk>
+ BYPASS <delay>
+ DE_IO <delay> <clk>
+ SE_ICLK_IO <delay> <clk>
+ SE_NICLK_IO <delay> <clk>
+
+- delay is retime delay in pico seconds as mentioned in data sheet.
+
+- rt_clk :clk to be use for retime.
+ Possible values are:
+ CLK_A
+ CLK_B
+ CLK_C
+ CLK_D
+
+Example of mmcclk pin which is a bi-direction pull pu with retime config
+as non inverted clock retimed with CLK_B and delay of 0 pico seconds:
+
+pin-controller {
+ ...
+ mmc0 {
+ pinctrl_mmc: mmc {
+ st,pins {
+ mmcclk = <&PIO13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+ ...
+ };
+ };
+ ...
+ };
+};
+
+sdhci0:sdhci@fe810000{
+ ...
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc>;
+};