summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@suse.de>2005-06-20 21:15:16 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2006-06-26 12:25:09 -0700
commit890fbae2818a045350b8d1e3bda61ceb88ff1d17 (patch)
treecf57a61841780ed1ab6bffa3ea0bf7d8cdd999d0 /Documentation
parent331b831983f9d706f4a40d08a996d5c2c7a6ea7b (diff)
downloadlinux-890fbae2818a045350b8d1e3bda61ceb88ff1d17.tar.bz2
[PATCH] devfs: Last little devfs cleanups throughout the kernel tree.
Just removes a few unused #defines and fixes some comments due to devfs now being gone. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/Changes15
-rw-r--r--Documentation/DocBook/kernel-api.tmpl5
-rw-r--r--Documentation/README.DAC9606
-rw-r--r--Documentation/initrd.txt24
-rw-r--r--Documentation/ioctl-number.txt1
-rw-r--r--Documentation/kernel-parameters.txt4
6 files changed, 17 insertions, 38 deletions
diff --git a/Documentation/Changes b/Documentation/Changes
index b02f476c2973..488272074c36 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -181,8 +181,8 @@ Intel IA32 microcode
--------------------
A driver has been added to allow updating of Intel IA32 microcode,
-accessible as both a devfs regular file and as a normal (misc)
-character device. If you are not using devfs you may need to:
+accessible as a normal (misc) character device. If you are not using
+udev you may need to:
mkdir /dev/cpu
mknod /dev/cpu/microcode c 10 184
@@ -201,7 +201,9 @@ with programs using shared memory.
udev
----
udev is a userspace application for populating /dev dynamically with
-only entries for devices actually present. udev replaces devfs.
+only entries for devices actually present. udev replaces the basic
+functionality of devfs, while allowing persistant device naming for
+devices.
FUSE
----
@@ -231,18 +233,13 @@ The PPP driver has been restructured to support multilink and to
enable it to operate over diverse media layers. If you use PPP,
upgrade pppd to at least 2.4.0.
-If you are not using devfs, you must have the device file /dev/ppp
+If you are not using udev, you must have the device file /dev/ppp
which can be made by:
mknod /dev/ppp c 108 0
as root.
-If you use devfsd and build ppp support as modules, you will need
-the following in your /etc/devfsd.conf file:
-
-LOOKUP PPP MODLOAD
-
Isdn4k-utils
------------
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 3630a0d7695f..1ae4dc0fd856 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -348,11 +348,6 @@ X!Earch/i386/kernel/mca.c
</sect1>
</chapter>
- <chapter id="devfs">
- <title>The Device File System</title>
-!Efs/devfs/base.c
- </chapter>
-
<chapter id="sysfs">
<title>The Filesystem for Exporting Kernel Objects</title>
!Efs/sysfs/file.c
diff --git a/Documentation/README.DAC960 b/Documentation/README.DAC960
index 98ea617a0dd6..0e8f618ab534 100644
--- a/Documentation/README.DAC960
+++ b/Documentation/README.DAC960
@@ -78,9 +78,9 @@ also known as "System Drives", and Drive Groups are also called "Packs". Both
terms are in use in the Mylex documentation; I have chosen to standardize on
the more generic "Logical Drive" and "Drive Group".
-DAC960 RAID disk devices are named in the style of the Device File System
-(DEVFS). The device corresponding to Logical Drive D on Controller C is
-referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
+DAC960 RAID disk devices are named in the style of the obsolete Device File
+System (DEVFS). The device corresponding to Logical Drive D on Controller C
+is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on
Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI
disks the device names will not change in the event of a disk drive failure.
diff --git a/Documentation/initrd.txt b/Documentation/initrd.txt
index 7de1c80cd719..b1b6440237a6 100644
--- a/Documentation/initrd.txt
+++ b/Documentation/initrd.txt
@@ -67,8 +67,7 @@ initrd adds the following new options:
as the last process has closed it, all data is freed and /dev/initrd
can't be opened anymore.
- root=/dev/ram0 (without devfs)
- root=/dev/rd/0 (with devfs)
+ root=/dev/ram0
initrd is mounted as root, and the normal boot procedure is followed,
with the RAM disk still mounted as root.
@@ -90,8 +89,7 @@ you're building an install floppy), the root file system creation
procedure should create the /initrd directory.
If initrd will not be mounted in some cases, its content is still
-accessible if the following device has been created (note that this
-does not work if using devfs):
+accessible if the following device has been created:
# mknod /dev/initrd b 1 250
# chmod 400 /dev/initrd
@@ -119,8 +117,7 @@ We'll describe the loopback device method:
(if space is critical, you may want to use the Minix FS instead of Ext2)
3) mount the file system, e.g.
# mount -t ext2 -o loop initrd /mnt
- 4) create the console device (not necessary if using devfs, but it can't
- hurt to do it anyway):
+ 4) create the console device:
# mkdir /mnt/dev
# mknod /mnt/dev/console c 5 1
5) copy all the files that are needed to properly use the initrd
@@ -152,12 +149,7 @@ have to be given:
root=/dev/ram0 init=/linuxrc rw
-if not using devfs, or
-
- root=/dev/rd/0 init=/linuxrc rw
-
-if using devfs. (rw is only necessary if writing to the initrd file
-system.)
+(rw is only necessary if writing to the initrd file system.)
With LOADLIN, you simply execute
@@ -217,9 +209,9 @@ following command:
# exec chroot . what-follows <dev/console >dev/console 2>&1
Where what-follows is a program under the new root, e.g. /sbin/init
-If the new root file system will be used with devfs and has no valid
-/dev directory, devfs must be mounted before invoking chroot in order to
-provide /dev/console.
+If the new root file system will be used with udev and has no valid
+/dev directory, udev must be initialized before invoking chroot in order
+to provide /dev/console.
Note: implementation details of pivot_root may change with time. In order
to ensure compatibility, the following points should be observed:
@@ -236,7 +228,7 @@ Now, the initrd can be unmounted and the memory allocated by the RAM
disk can be freed:
# umount /initrd
-# blockdev --flushbufs /dev/ram0 # /dev/rd/0 if using devfs
+# blockdev --flushbufs /dev/ram0
It is also possible to use initrd with an NFS-mounted root, see the
pivot_root(8) man page for details.
diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt
index 1543802ef53e..edc04d74ae23 100644
--- a/Documentation/ioctl-number.txt
+++ b/Documentation/ioctl-number.txt
@@ -119,7 +119,6 @@ Code Seq# Include File Comments
'c' 00-7F linux/comstats.h conflict!
'c' 00-7F linux/coda.h conflict!
'd' 00-FF linux/char/drm/drm/h conflict!
-'d' 00-1F linux/devfs_fs.h conflict!
'd' 00-DF linux/video_decoder.h conflict!
'd' F0-FF linux/digi1.h
'e' all linux/digi1.h conflict!
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 2e352a605fcf..bf5d2cd6a56e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -35,7 +35,6 @@ parameter is applicable:
APM Advanced Power Management support is enabled.
AX25 Appropriate AX.25 support is enabled.
CD Appropriate CD support is enabled.
- DEVFS devfs support is enabled.
DRM Direct Rendering Management support is enabled.
EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
EFI EFI Partitioning (GPT) is enabled
@@ -440,9 +439,6 @@ running once the system is up.
Format: <area>[,<node>]
See also Documentation/networking/decnet.txt.
- devfs= [DEVFS]
- See Documentation/filesystems/devfs/boot-options.
-
dhash_entries= [KNL]
Set number of hash buckets for dentry cache.