summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-07-03 17:12:13 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-07-03 17:12:13 -0700
commit7f0ef0267e20d62d45d527911a993b1e998f4968 (patch)
treede51abc7da5903f59d83e23937f22420164c9477 /Documentation
parent862f0012549110d6f2586bf54b52ed4540cbff3a (diff)
parent9307c29524502c21f0e8a6d96d850b2f5bc0bd9a (diff)
downloadlinux-7f0ef0267e20d62d45d527911a993b1e998f4968.tar.bz2
Merge branch 'akpm' (updates from Andrew Morton)
Merge first patch-bomb from Andrew Morton: - various misc bits - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been distracted. There has been quite a bit of activity. - About half the MM queue - Some backlight bits - Various lib/ updates - checkpatch updates - zillions more little rtc patches - ptrace - signals - exec - procfs - rapidio - nbd - aoe - pps - memstick - tools/testing/selftests updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits) tools/testing/selftests: don't assume the x bit is set on scripts selftests: add .gitignore for kcmp selftests: fix clean target in kcmp Makefile selftests: add .gitignore for vm selftests: add hugetlbfstest self-test: fix make clean selftests: exit 1 on failure kernel/resource.c: remove the unneeded assignment in function __find_resource aio: fix wrong comment in aio_complete() drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode drivers/memstick/host/r592.c: convert to module_pci_driver drivers/memstick/host/jmb38x_ms: convert to module_pci_driver pps-gpio: add device-tree binding and support drivers/pps/clients/pps-gpio.c: convert to module_platform_driver drivers/pps/clients/pps-gpio.c: convert to devm_* helpers drivers/parport/share.c: use kzalloc Documentation/accounting/getdelays.c: avoid strncpy in accounting tool aoe: update internal version number to v83 aoe: update copyright date aoe: perform I/O completions in parallel ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/CodingStyle3
-rw-r--r--Documentation/DocBook/kernel-locking.tmpl7
-rw-r--r--Documentation/accounting/getdelays.c4
-rw-r--r--Documentation/cgroups/memory.txt7
-rw-r--r--Documentation/crypto/async-tx-api.txt1
-rw-r--r--Documentation/devices.txt3
-rw-r--r--Documentation/devicetree/bindings/pps/pps-gpio.txt20
-rw-r--r--Documentation/filesystems/proc.txt7
-rw-r--r--Documentation/filesystems/vfs.txt25
-rw-r--r--Documentation/kdump/kdump.txt31
-rw-r--r--Documentation/rapidio/rapidio.txt98
-rw-r--r--Documentation/rapidio/sysfs.txt1
-rw-r--r--Documentation/rtc.txt7
-rw-r--r--Documentation/vm/pagemap.txt3
-rw-r--r--Documentation/vm/soft-dirty.txt36
15 files changed, 191 insertions, 62 deletions
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index e00b8f0dde52..7fe0546c504a 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -389,7 +389,8 @@ Albeit deprecated by some people, the equivalent of the goto statement is
used frequently by compilers in form of the unconditional jump instruction.
The goto statement comes in handy when a function exits from multiple
-locations and some common work such as cleanup has to be done.
+locations and some common work such as cleanup has to be done. If there is no
+cleanup needed then just return directly.
The rationale is:
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 67e7ab41c0a6..09e884e5b9f5 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -1955,12 +1955,17 @@ machines due to caching.
</sect1>
</chapter>
- <chapter id="apiref">
+ <chapter id="apiref-mutex">
<title>Mutex API reference</title>
!Iinclude/linux/mutex.h
!Ekernel/mutex.c
</chapter>
+ <chapter id="apiref-futex">
+ <title>Futex API reference</title>
+!Ikernel/futex.c
+ </chapter>
+
<chapter id="references">
<title>Further reading</title>
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index f8ebcde43b17..c6a06b71594d 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -272,7 +272,7 @@ int main(int argc, char *argv[])
char *logfile = NULL;
int loop = 0;
int containerset = 0;
- char containerpath[1024];
+ char *containerpath = NULL;
int cfd = 0;
int forking = 0;
sigset_t sigset;
@@ -299,7 +299,7 @@ int main(int argc, char *argv[])
break;
case 'C':
containerset = 1;
- strncpy(containerpath, optarg, strlen(optarg) + 1);
+ containerpath = optarg;
break;
case 'w':
logfile = strdup(optarg);
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index ddf4f93967a9..327acec6f90b 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -834,10 +834,9 @@ Test:
12. TODO
-1. Add support for accounting huge pages (as a separate controller)
-2. Make per-cgroup scanner reclaim not-shared pages first
-3. Teach controller to account for shared-pages
-4. Start reclamation in the background when the limit is
+1. Make per-cgroup scanner reclaim not-shared pages first
+2. Teach controller to account for shared-pages
+3. Start reclamation in the background when the limit is
not yet hit but the usage is getting closer
Summary
diff --git a/Documentation/crypto/async-tx-api.txt b/Documentation/crypto/async-tx-api.txt
index ba046b8fa92f..7bf1be20d93a 100644
--- a/Documentation/crypto/async-tx-api.txt
+++ b/Documentation/crypto/async-tx-api.txt
@@ -222,5 +222,4 @@ drivers/dma/: location for offload engine drivers
include/linux/async_tx.h: core header file for the async_tx api
crypto/async_tx/async_tx.c: async_tx interface to dmaengine and common code
crypto/async_tx/async_memcpy.c: copy offload
-crypto/async_tx/async_memset.c: memory fill offload
crypto/async_tx/async_xor.c: xor and xor zero sum offload
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index b9015912bca6..23721d3be3e6 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -100,8 +100,7 @@ Your cooperation is appreciated.
10 = /dev/aio Asynchronous I/O notification interface
11 = /dev/kmsg Writes to this come out as printk's, reads
export the buffered printk records.
- 12 = /dev/oldmem Used by crashdump kernels to access
- the memory of the kernel that crashed.
+ 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
1 block RAM disk
0 = /dev/ram0 First RAM disk
diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.txt b/Documentation/devicetree/bindings/pps/pps-gpio.txt
new file mode 100644
index 000000000000..40bf9c3564a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pps/pps-gpio.txt
@@ -0,0 +1,20 @@
+Device-Tree Bindings for a PPS Signal on GPIO
+
+These properties describe a PPS (pulse-per-second) signal connected to
+a GPIO pin.
+
+Required properties:
+- compatible: should be "pps-gpio"
+- gpios: one PPS GPIO in the format described by ../gpio/gpio.txt
+
+Optional properties:
+- assert-falling-edge: when present, assert is indicated by a falling edge
+ (instead of by a rising edge)
+
+Example:
+ pps {
+ compatible = "pps-gpio";
+ gpios = <&gpio2 6 0>;
+
+ assert-falling-edge;
+ };
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index fd8d0d594fc7..fcc22c982a25 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -473,7 +473,8 @@ This file is only present if the CONFIG_MMU kernel configuration option is
enabled.
The /proc/PID/clear_refs is used to reset the PG_Referenced and ACCESSED/YOUNG
-bits on both physical and virtual pages associated with a process.
+bits on both physical and virtual pages associated with a process, and the
+soft-dirty bit on pte (see Documentation/vm/soft-dirty.txt for details).
To clear the bits for all the pages associated with the process
> echo 1 > /proc/PID/clear_refs
@@ -482,6 +483,10 @@ To clear the bits for the anonymous pages associated with the process
To clear the bits for the file mapped pages associated with the process
> echo 3 > /proc/PID/clear_refs
+
+To clear the soft-dirty bit
+ > echo 4 > /proc/PID/clear_refs
+
Any other value written to /proc/PID/clear_refs will have no effect.
The /proc/pid/pagemap gives the PFN, which can be used to find the pageflags
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 1f0ba30ae47e..f93a88250a44 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -559,7 +559,6 @@ your filesystem. The following members are defined:
struct address_space_operations {
int (*writepage)(struct page *page, struct writeback_control *wbc);
int (*readpage)(struct file *, struct page *);
- int (*sync_page)(struct page *);
int (*writepages)(struct address_space *, struct writeback_control *);
int (*set_page_dirty)(struct page *page);
int (*readpages)(struct file *filp, struct address_space *mapping,
@@ -581,6 +580,9 @@ struct address_space_operations {
/* migrate the contents of a page to the specified target */
int (*migratepage) (struct page *, struct page *);
int (*launder_page) (struct page *);
+ int (*is_partially_uptodate) (struct page *, read_descriptor_t *,
+ unsigned long);
+ void (*is_dirty_writeback) (struct page *, bool *, bool *);
int (*error_remove_page) (struct mapping *mapping, struct page *page);
int (*swap_activate)(struct file *);
int (*swap_deactivate)(struct file *);
@@ -612,13 +614,6 @@ struct address_space_operations {
In this case, the page will be relocated, relocked and if
that all succeeds, ->readpage will be called again.
- sync_page: called by the VM to notify the backing store to perform all
- queued I/O operations for a page. I/O operations for other pages
- associated with this address_space object may also be performed.
-
- This function is optional and is called only for pages with
- PG_Writeback set while waiting for the writeback to complete.
-
writepages: called by the VM to write out pages associated with the
address_space object. If wbc->sync_mode is WBC_SYNC_ALL, then
the writeback_control will specify a range of pages that must be
@@ -747,6 +742,20 @@ struct address_space_operations {
prevent redirtying the page, it is kept locked during the whole
operation.
+ is_partially_uptodate: Called by the VM when reading a file through the
+ pagecache when the underlying blocksize != pagesize. If the required
+ block is up to date then the read can complete without needing the IO
+ to bring the whole page up to date.
+
+ is_dirty_writeback: Called by the VM when attempting to reclaim a page.
+ The VM uses dirty and writeback information to determine if it needs
+ to stall to allow flushers a chance to complete some IO. Ordinarily
+ it can use PageDirty and PageWriteback but some filesystems have
+ more complex state (unstable pages in NFS prevent reclaim) or
+ do not set those flags due to locking problems (jbd). This callback
+ allows a filesystem to indicate to the VM if a page should be
+ treated as dirty or writeback for the purposes of stalling.
+
error_remove_page: normally set to generic_error_remove_page if truncation
is ok for this address space. Used for memory failure handling.
Setting this implies you deal with pages going away under you,
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 9c7fd988e299..bec123e466ae 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -47,19 +47,12 @@ parameter. Optionally the size of the ELF header can also be passed
when using the elfcorehdr=[size[KMG]@]offset[KMG] syntax.
-With the dump-capture kernel, you can access the memory image, or "old
-memory," in two ways:
-
-- Through a /dev/oldmem device interface. A capture utility can read the
- device file and write out the memory in raw format. This is a raw dump
- of memory. Analysis and capture tools must be intelligent enough to
- determine where to look for the right information.
-
-- Through /proc/vmcore. This exports the dump as an ELF-format file that
- you can write out using file copy commands such as cp or scp. Further,
- you can use analysis tools such as the GNU Debugger (GDB) and the Crash
- tool to debug the dump file. This method ensures that the dump pages are
- correctly ordered.
+With the dump-capture kernel, you can access the memory image through
+/proc/vmcore. This exports the dump as an ELF-format file that you can
+write out using file copy commands such as cp or scp. Further, you can
+use analysis tools such as the GNU Debugger (GDB) and the Crash tool to
+debug the dump file. This method ensures that the dump pages are correctly
+ordered.
Setup and Installation
@@ -423,18 +416,6 @@ the following command:
cp /proc/vmcore <dump-file>
-You can also access dumped memory as a /dev/oldmem device for a linear
-and raw view. To create the device, use the following command:
-
- mknod /dev/oldmem c 1 12
-
-Use the dd command with suitable options for count, bs, and skip to
-access specific portions of the dump.
-
-To see the entire memory, use the following command:
-
- dd if=/dev/oldmem of=oldmem.001
-
Analysis
========
diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt
index a9c16c979da2..717f5aa388b1 100644
--- a/Documentation/rapidio/rapidio.txt
+++ b/Documentation/rapidio/rapidio.txt
@@ -73,28 +73,44 @@ data structure. This structure includes lists of all devices and local master
ports that form the same network. It also contains a pointer to the default
master port that is used to communicate with devices within the network.
+2.5 Device Drivers
+
+RapidIO device-specific drivers follow Linux Kernel Driver Model and are
+intended to support specific RapidIO devices attached to the RapidIO network.
+
+2.6 Subsystem Interfaces
+
+RapidIO interconnect specification defines features that may be used to provide
+one or more common service layers for all participating RapidIO devices. These
+common services may act separately from device-specific drivers or be used by
+device-specific drivers. Example of such service provider is the RIONET driver
+which implements Ethernet-over-RapidIO interface. Because only one driver can be
+registered for a device, all common RapidIO services have to be registered as
+subsystem interfaces. This allows to have multiple common services attached to
+the same device without blocking attachment of a device-specific driver.
+
3. Subsystem Initialization
---------------------------
In order to initialize the RapidIO subsystem, a platform must initialize and
register at least one master port within the RapidIO network. To register mport
-within the subsystem controller driver initialization code calls function
+within the subsystem controller driver's initialization code calls function
rio_register_mport() for each available master port.
-RapidIO subsystem uses subsys_initcall() or device_initcall() to perform
-controller initialization (depending on controller device type).
-
After all active master ports are registered with a RapidIO subsystem,
an enumeration and/or discovery routine may be called automatically or
by user-space command.
+RapidIO subsystem can be configured to be built as a statically linked or
+modular component of the kernel (see details below).
+
4. Enumeration and Discovery
----------------------------
4.1 Overview
------------
-RapidIO subsystem configuration options allow users to specify enumeration and
+RapidIO subsystem configuration options allow users to build enumeration and
discovery methods as statically linked components or loadable modules.
An enumeration/discovery method implementation and available input parameters
define how any given method can be attached to available RapidIO mports:
@@ -115,8 +131,8 @@ several methods to initiate an enumeration and/or discovery process:
endpoint waits for enumeration to be completed. If the specified timeout
expires the discovery process is terminated without obtaining RapidIO network
information. NOTE: a timed out discovery process may be restarted later using
- a user-space command as it is described later if the given endpoint was
- enumerated successfully.
+ a user-space command as it is described below (if the given endpoint was
+ enumerated successfully).
(b) Statically linked enumeration and discovery process can be started by
a command from user space. This initiation method provides more flexibility
@@ -138,15 +154,42 @@ When a network scan process is started it calls an enumeration or discovery
routine depending on the configured role of a master port: host or agent.
Enumeration is performed by a master port if it is configured as a host port by
-assigning a host device ID greater than or equal to zero. A host device ID is
-assigned to a master port through the kernel command line parameter "riohdid=",
-or can be configured in a platform-specific manner. If the host device ID for
-a specific master port is set to -1, the discovery process will be performed
-for it.
+assigning a host destination ID greater than or equal to zero. The host
+destination ID can be assigned to a master port using various methods depending
+on RapidIO subsystem build configuration:
+
+ (a) For a statically linked RapidIO subsystem core use command line parameter
+ "rapidio.hdid=" with a list of destination ID assignments in order of mport
+ device registration. For example, in a system with two RapidIO controllers
+ the command line parameter "rapidio.hdid=-1,7" will result in assignment of
+ the host destination ID=7 to the second RapidIO controller, while the first
+ one will be assigned destination ID=-1.
+
+ (b) If the RapidIO subsystem core is built as a loadable module, in addition
+ to the method shown above, the host destination ID(s) can be specified using
+ traditional methods of passing module parameter "hdid=" during its loading:
+ - from command line: "modprobe rapidio hdid=-1,7", or
+ - from modprobe configuration file using configuration command "options",
+ like in this example: "options rapidio hdid=-1,7". An example of modprobe
+ configuration file is provided in the section below.
+
+ NOTES:
+ (i) if "hdid=" parameter is omitted all available mport will be assigned
+ destination ID = -1;
+ (ii) the "hdid=" parameter in systems with multiple mports can have
+ destination ID assignments omitted from the end of list (default = -1).
+
+If the host device ID for a specific master port is set to -1, the discovery
+process will be performed for it.
The enumeration and discovery routines use RapidIO maintenance transactions
to access the configuration space of devices.
+NOTE: If RapidIO switch-specific device drivers are built as loadable modules
+they must be loaded before enumeration/discovery process starts.
+This requirement is cased by the fact that enumeration/discovery methods invoke
+vendor-specific callbacks on early stages.
+
4.2 Automatic Start of Enumeration and Discovery
------------------------------------------------
@@ -266,7 +309,36 @@ method's module initialization routine calls rio_register_scan() to attach
an enumerator to a specified mport device (or devices). The basic enumerator
implementation demonstrates this process.
-5. References
+4.6 Using Loadable RapidIO Switch Drivers
+-----------------------------------------
+
+In the case when RapidIO switch drivers are built as loadable modules a user
+must ensure that they are loaded before the enumeration/discovery starts.
+This process can be automated by specifying pre- or post- dependencies in the
+RapidIO-specific modprobe configuration file as shown in the example below.
+
+ File /etc/modprobe.d/rapidio.conf:
+ ----------------------------------
+
+ # Configure RapidIO subsystem modules
+
+ # Set enumerator host destination ID (overrides kernel command line option)
+ options rapidio hdid=-1,2
+
+ # Load RapidIO switch drivers immediately after rapidio core module was loaded
+ softdep rapidio post: idt_gen2 idtcps tsi57x
+
+ # OR :
+
+ # Load RapidIO switch drivers just before rio-scan enumerator module is loaded
+ softdep rio-scan pre: idt_gen2 idtcps tsi57x
+
+ --------------------------
+
+NOTE: In the example above, one of "softdep" commands must be removed or
+commented out to keep required module loading sequence.
+
+A. References
-------------
[1] RapidIO Trade Association. RapidIO Interconnect Specifications.
diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.txt
index 19878179da4c..271438c0617f 100644
--- a/Documentation/rapidio/sysfs.txt
+++ b/Documentation/rapidio/sysfs.txt
@@ -40,6 +40,7 @@ device_rev - returns the device revision level
(see 4.1 for switch specific details)
lprev - returns name of previous device (switch) on the path to the device
that that owns this attribute
+ modalias - returns the device modalias
In addition to the files listed above, each device has a binary attribute file
that allows read/write access to the device configuration registers using
diff --git a/Documentation/rtc.txt b/Documentation/rtc.txt
index 32aa4002de4a..596b60c08b74 100644
--- a/Documentation/rtc.txt
+++ b/Documentation/rtc.txt
@@ -153,9 +153,10 @@ since_epoch: The number of seconds since the epoch according to the RTC
time: RTC-provided time
wakealarm: The time at which the clock will generate a system wakeup
event. This is a one shot wakeup event, so must be reset
- after wake if a daily wakeup is required. Format is either
- seconds since the epoch or, if there's a leading +, seconds
- in the future.
+ after wake if a daily wakeup is required. Format is seconds since
+ the epoch by default, or if there's a leading +, seconds in the
+ future, or if there is a leading +=, seconds ahead of the current
+ alarm.
IOCTL INTERFACE
---------------
diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt
index 7587493c67f1..fd7c3cfddd8e 100644
--- a/Documentation/vm/pagemap.txt
+++ b/Documentation/vm/pagemap.txt
@@ -15,7 +15,8 @@ There are three components to pagemap:
* Bits 0-54 page frame number (PFN) if present
* Bits 0-4 swap type if swapped
* Bits 5-54 swap offset if swapped
- * Bits 55-60 page shift (page size = 1<<page shift)
+ * Bit 55 pte is soft-dirty (see Documentation/vm/soft-dirty.txt)
+ * Bits 56-60 zero
* Bit 61 page is file-page or shared-anon
* Bit 62 page swapped
* Bit 63 page present
diff --git a/Documentation/vm/soft-dirty.txt b/Documentation/vm/soft-dirty.txt
new file mode 100644
index 000000000000..9a12a5956bc0
--- /dev/null
+++ b/Documentation/vm/soft-dirty.txt
@@ -0,0 +1,36 @@
+ SOFT-DIRTY PTEs
+
+ The soft-dirty is a bit on a PTE which helps to track which pages a task
+writes to. In order to do this tracking one should
+
+ 1. Clear soft-dirty bits from the task's PTEs.
+
+ This is done by writing "4" into the /proc/PID/clear_refs file of the
+ task in question.
+
+ 2. Wait some time.
+
+ 3. Read soft-dirty bits from the PTEs.
+
+ This is done by reading from the /proc/PID/pagemap. The bit 55 of the
+ 64-bit qword is the soft-dirty one. If set, the respective PTE was
+ written to since step 1.
+
+
+ Internally, to do this tracking, the writable bit is cleared from PTEs
+when the soft-dirty bit is cleared. So, after this, when the task tries to
+modify a page at some virtual address the #PF occurs and the kernel sets
+the soft-dirty bit on the respective PTE.
+
+ Note, that although all the task's address space is marked as r/o after the
+soft-dirty bits clear, the #PF-s that occur after that are processed fast.
+This is so, since the pages are still mapped to physical memory, and thus all
+the kernel does is finds this fact out and puts both writable and soft-dirty
+bits on the PTE.
+
+
+ This feature is actively used by the checkpoint-restore project. You
+can find more details about it on http://criu.org
+
+
+-- Pavel Emelyanov, Apr 9, 2013