Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Pull i2c updates from Wolfram Sang:
 "I2C has the following updates for 3.16:

   - major cleanups to the rcar and sh_mobile drivers
   - removal of nuc900 driver which had a compile error for years
   - usual bunch of driver updates, bugfixes and cleanups"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (44 commits)
  i2c: pca954x: Fix compilation without CONFIG_GPIOLIB
  i2c: mux: pca954x: Use the descriptor-based GPIO API
  i2c: mpc: insert DR read in i2c_fixup()
  i2c: bfin: turn to Resource-managed API in probe function
  i2c: Make of_device_id array const
  i2c: remove unnecessary OOM messages
  i2c: designware-pci: Add Haswell PCI IDs
  i2c: designware: Add runtime PM hooks
  i2c: designware: Disable device on system suspend
  i2c: nuc900: remove driver
  i2c: imx: update i2c clock divider for each transaction
  i2c: imx: fix the i2c bus hang issue when do repeat restart
  i2c: rcar: update copyright and license information
  i2c: rcar: janitorial cleanup after refactoring
  i2c: rcar: reuse status bits as enable bits
  i2c: rcar: remove spinlock
  i2c: rcar: refactor status bit handling
  i2c: rcar: refactor setting up msg
  i2c: rcar: check bus free before first message
  i2c: rcar: refactor irq state machine
  ...

5 files changed, 45 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
index 1ac8ea8ade1d..bfeabb843941 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
@@ -8,6 +8,12 @@ the standard I2C multi-master rules.  Using GPIOs is generally useful in
 the case where there is a device on the bus that has errata and/or bugs
 that makes standard multimaster mode not feasible.
 
+Note that this scheme works well enough but has some downsides:
+* It is nonstandard (not using standard I2C multimaster)
+* Having two masters on a bus in general makes it relatively hard to debug
+  problems (hard to tell if i2c issues were caused by one master, another, or
+  some device on the bus).
+
 
 Algorithm:
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
index 056732cfdcee..d4745e31f5c6 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
@@ -5,7 +5,14 @@ at various speeds ranging from 100khz to 3.4Mhz.
 
 Required properties:
   - compatible: value should be.
-      -> "samsung,exynos5-hsi2c", for i2c compatible with exynos5 hsi2c.
+	-> "samsung,exynos5-hsi2c", (DEPRECATED)
+				for i2c compatible with HSI2C available
+				on Exynos5250 and Exynos5420 SoCs.
+	-> "samsung,exynos5250-hsi2c", for i2c compatible with HSI2C available
+				on Exynos5250 and Exynos5420 SoCs.
+	-> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
+				on Exynos5260 SoCs.
+
   - reg: physical base address of the controller and length of memory mapped
     region.
   - interrupts: interrupt number to the cpu.
@@ -26,7 +33,7 @@ Optional properties:
 Example:
 
 hsi2c@12ca0000 {
-	compatible = "samsung,exynos5-hsi2c";
+	compatible = "samsung,exynos5250-hsi2c";
 	reg = <0x12ca0000 0x100>;
 	interrupts = <56>;
 	clock-frequency = <100000>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index befd4fb4764f..5c30026921ae 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -5,7 +5,7 @@ Required properties :
 
  - reg             : Offset and length of the register set for the device
  - compatible      : Should be either:
-                     - "allwinner,sun4i-i2c"
+                     - "allwinner,sun4i-a10-i2c"
                      - "allwinner,sun6i-a31-i2c"
                      - "marvell,mv64xxx-i2c"
                      - "marvell,mv78230-i2c"
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index dd8b2dd1edeb..16b3e07aa98f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -7,6 +7,9 @@ Required properties:
 	"renesas,i2c-r8a7779"
 	"renesas,i2c-r8a7790"
 	"renesas,i2c-r8a7791"
+	"renesas,i2c-r8a7792"
+	"renesas,i2c-r8a7793"
+	"renesas,i2c-r8a7794"
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: interrupt specifier.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
new file mode 100644
index 000000000000..d2153ce36fa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
@@ -0,0 +1,26 @@
+Device tree configuration for Renesas IIC (sh_mobile) driver
+
+Required properties:
+- compatible      : "renesas,iic-<soctype>". "renesas,rmobile-iic" as fallback
+- reg             : address start and address range size of device
+- interrupts      : interrupt of device
+- clocks          : clock for device
+- #address-cells  : should be <1>
+- #size-cells     : should be <0>
+
+Optional properties:
+- clock-frequency : frequency of bus clock in Hz. Default 100kHz if unset.
+
+Pinctrl properties might be needed, too. See there.
+
+Example:
+
+	iic0: i2c@e6500000 {
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x425>;
+		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
+		clock-frequency = <400000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};