diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-02-20 21:32:37 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-02-20 21:32:37 -0800 |
commit | 780607b9731feef575514108fc7956c54180f16e (patch) | |
tree | 873d8203bd441f6494bbd3f57a9f6371b2ea1973 /Documentation | |
parent | e4286926abbbaab9b047c8bc25cae78ec990928f (diff) | |
parent | b5a12546e779d4f5586f58e60e0ef5070a833a64 (diff) | |
download | linux-780607b9731feef575514108fc7956c54180f16e.tar.bz2 |
Merge tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.12-rc1.
It's been an active set of development in these subsystems for the
past few months:
- loads of typec features added for new hardware
- xhci features and bugfixes
- dwc3 features added for more hardware support
- dwc2 fixes and new hardware support
- cdns3 driver updates for more hardware support
- gadget driver cleanups and minor fixes
- usb-serial fixes, new driver, and more devices supported
- thunderbolt feature additions for new hardware
- lots of other tiny fixups and additions
The chrome driver changes are in here as well, as they depended on
some of the typec changes, and the maintainer acked them.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (300 commits)
dt-bindings: usb: mediatek: musb: add mt8516 compatbile
dt-bindings: usb: mtk-xhci: add compatible for mt2701 and mt7623
dt-bindings: usb: mtk-xhci: add optional assigned clock properties
Documentation: connector: Update the description of sink-vdos
usb: misc: usb3503: Fix logic in usb3503_init()
dt-bindings: usb: usb-device: fix typo in required properties
usb: Replace lkml.org links with lore
dt-bindings: usb: dwc3: add description for rk3328
dt-bindings: usb: convert rockchip,dwc3.txt to yaml
usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable
USB: quirks: sort quirk entries
USB: serial: drop bogus to_usb_serial_port() checks
USB: serial: make remove callback return void
USB: serial: drop if with an always false condition
usb: gadget: Assign boolean values to a bool variable
usb: typec: tcpm: Get Sink VDO from fwnode
dt-bindings: connector: Add SVDM VDO properties
usb: typec: displayport: Fill the negotiated SVDM Version in the header
usb: typec: ucsi: Determine common SVDM Version
usb: typec: tcpm: Determine common SVDM Version
...
Diffstat (limited to 'Documentation')
39 files changed, 1780 insertions, 775 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index a91b4b24496e..d7f09d011b6d 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -49,6 +49,15 @@ Description: Holds a comma separated list of device unique_ids that If a device is authorized automatically during boot its boot attribute is set to 1. +What: /sys/bus/thunderbolt/devices/.../domainX/deauthorization +Date: May 2021 +KernelVersion: 5.12 +Contact: Mika Westerberg <mika.westerberg@linux.intel.com> +Description: This attribute tells whether the system supports + de-authorization of devices. Value of 1 means user can + de-authorize PCIe tunnel by writing 0 to authorized + attribute under each device. + What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection Date: Mar 2019 KernelVersion: 4.21 @@ -76,6 +85,8 @@ Description: This attribute holds current Thunderbolt security level usbonly Automatically tunnel USB controller of the connected Thunderbolt dock (and Display Port). All PCIe links downstream of the dock are removed. + nopcie USB4 system where PCIe tunneling is disabled from + the BIOS. ======= ================================================== What: /sys/bus/thunderbolt/devices/.../authorized @@ -84,22 +95,25 @@ KernelVersion: 4.13 Contact: thunderbolt-software@lists.01.org Description: This attribute is used to authorize Thunderbolt devices after they have been connected. If the device is not - authorized, no devices such as PCIe and Display port are - available to the system. + authorized, no PCIe devices are available to the system. Contents of this attribute will be 0 when the device is not yet authorized. Possible values are supported: - == =========================================== + == =================================================== + 0 The device will be de-authorized (only supported if + deauthorization attribute under domain contains 1) 1 The device will be authorized and connected - == =========================================== + == =================================================== When key attribute contains 32 byte hex string the possible values are: == ======================================================== + 0 The device will be de-authorized (only supported if + deauthorization attribute under domain contains 1) 1 The 32 byte hex string is added to the device NVM and the device is authorized. 2 Send a challenge based on the 32 byte hex string. If the diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec index 8eab41e79ce6..40122d915ae1 100644 --- a/Documentation/ABI/testing/sysfs-class-typec +++ b/Documentation/ABI/testing/sysfs-class-typec @@ -105,7 +105,25 @@ Date: April 2017 Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> Description: Revision number of the supported USB Power Delivery - specification, or 0 when USB Power Delivery is not supported. + specification, or 0.0 when USB Power Delivery is not supported. + + Example values: + - "2.0": USB Power Delivery Release 2.0 + - "3.0": USB Power Delivery Release 3.0 + - "3.1": USB Power Delivery Release 3.1 + +What: /sys/class/typec/<port>-{partner|cable}/usb_power_delivery_revision +Date: January 2021 +Contact: Benson Leung <bleung@chromium.org> +Description: + Revision number of the supported USB Power Delivery + specification of the port partner or cable, or 0.0 when USB + Power Delivery is not supported. + + Example values: + - "2.0": USB Power Delivery Release 2.0 + - "3.0": USB Power Delivery Release 3.0 + - "3.1": USB Power Delivery Release 3.1 What: /sys/class/typec/<port>/usb_typec_revision Date: April 2017 diff --git a/Documentation/admin-guide/thunderbolt.rst b/Documentation/admin-guide/thunderbolt.rst index 613cb24c76c7..f18e881373c4 100644 --- a/Documentation/admin-guide/thunderbolt.rst +++ b/Documentation/admin-guide/thunderbolt.rst @@ -47,6 +47,9 @@ be DMA masters and thus read contents of the host memory without CPU and OS knowing about it. There are ways to prevent this by setting up an IOMMU but it is not always available for various reasons. +Some USB4 systems have a BIOS setting to disable PCIe tunneling. This is +treated as another security level (nopcie). + The security levels are as follows: none @@ -77,6 +80,10 @@ The security levels are as follows: Display Port in a dock. All PCIe links downstream of the dock are removed. + nopcie + PCIe tunneling is disabled/forbidden from the BIOS. Available in some + USB4 systems. + The current security level can be read from ``/sys/bus/thunderbolt/devices/domainX/security`` where ``domainX`` is the Thunderbolt domain the host controller manages. There is typically @@ -153,6 +160,22 @@ If the user still wants to connect the device they can either approve the device without a key or write a new key and write 1 to the ``authorized`` file to get the new key stored on the device NVM. +De-authorizing devices +---------------------- +It is possible to de-authorize devices by writing ``0`` to their +``authorized`` attribute. This requires support from the connection +manager implementation and can be checked by reading domain +``deauthorization`` attribute. If it reads ``1`` then the feature is +supported. + +When a device is de-authorized the PCIe tunnel from the parent device +PCIe downstream (or root) port to the device PCIe upstream port is torn +down. This is essentially the same thing as PCIe hot-remove and the PCIe +toplogy in question will not be accessible anymore until the device is +authorized again. If there is storage such as NVMe or similar involved, +there is a risk for data loss if the filesystem on that storage is not +properly shut down. You have been warned! + DMA protection utilizing IOMMU ------------------------------ Recent systems from 2018 and forward with Thunderbolt ports may natively diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 4286ed767a0a..ce11b2027199 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -137,6 +137,18 @@ properties: maxItems: 7 $ref: /schemas/types.yaml#/definitions/uint32-array + sink-vdos: + description: An array of u32 with each entry, a Vendor Defined Message Object (VDO), + providing additional information corresponding to the product, the detailed bit + definitions and the order of each VDO can be found in + "USB Power Delivery Specification Revision 3.0, Version 2.0 + ECNs 2020-12-10" + chapter 6.4.4.3.1 Discover Identity. User can specify the VDO array via + VDO_IDH/_CERT/_PRODUCT/_UFP/_DFP/_PCABLE/_ACABLE(1/2)/_VPD() defined in + dt-bindings/usb/pd.h. + minItems: 3 + maxItems: 6 + $ref: /schemas/types.yaml#/definitions/uint32-array + op-sink-microwatt: description: Sink required operating power in microwatt, if source can't offer the power, Capability Mismatch is set. Required for power sink and diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt index c51dd99dc0d3..f546b1f7dd6d 100644 --- a/Documentation/devicetree/bindings/net/btusb.txt +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -4,7 +4,7 @@ Generic Bluetooth controller over USB (btusb driver) Required properties: - compatible : should comply with the format "usbVID,PID" specified in - Documentation/devicetree/bindings/usb/usb-device.txt + Documentation/devicetree/bindings/usb/usb-device.yaml At the time of writing, the only OF supported devices (more may be added later) are: diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index c0058332b967..e349fa5de606 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -79,7 +79,9 @@ properties: patternProperties: "^usb@[0-9a-f]+$": - type: object + oneOf: + - $ref: dwc2.yaml# + - $ref: snps,dwc3.yaml# additionalProperties: false @@ -229,6 +231,6 @@ examples: interrupts = <30>; dr_mode = "host"; snps,dis_u2_susphy_quirk; - snps,quirk-frame-length-adjustment; + snps,quirk-frame-length-adjustment = <0x20>; }; }; diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index df0e02e1ee43..bf73de0d5b4a 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -31,13 +31,13 @@ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Sub-nodes: The dwc3 core should be added as subnode to ST DWC3 glue as shown in the example below. The DT binding details of dwc3 can be found in: -Documentation/devicetree/bindings/usb/dwc3.txt +Documentation/devicetree/bindings/usb/snps,dwc3.yaml NB: The dr_mode property described in [1] is NOT optional for this driver, as the default value is "otg", which isn't supported by this SoC. Valid dr_mode values for dwc3-st are either "host" or "device". -[1] Documentation/devicetree/bindings/usb/generic.txt +[1] Documentation/devicetree/bindings/usb/usb-drd.yaml Example: diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt index 4aae5b2cef56..a668f43bedf5 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt @@ -19,7 +19,7 @@ Example device node: #address-cells = <0x2>; #size-cells = <0x1>; compatible = "xlnx,zynqmp-dwc3"; - clock-names = "bus_clk" "ref_clk"; + clock-names = "bus_clk", "ref_clk"; clocks = <&clk125>, <&clk125>; ranges; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt deleted file mode 100644 index 1aae2b6160c1..000000000000 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ /dev/null @@ -1,128 +0,0 @@ -synopsys DWC3 CORE - -DWC3- USB3 CONTROLLER. Complies to the generic USB binding properties - as described in 'usb/generic.txt' - -Required properties: - - compatible: must be "snps,dwc3" - - reg : Address and length of the register set for the device - - interrupts: Interrupts used by the dwc3 controller. - - clock-names: list of clock names. Ideally should be "ref", - "bus_early", "suspend" but may be less or more. - - clocks: list of phandle and clock specifier pairs corresponding to - entries in the clock-names property. - -Exception for clocks: - clocks are optional if the parent node (i.e. glue-layer) is compatible to - one of the following: - "cavium,octeon-7130-usb-uctl" - "qcom,dwc3" - "samsung,exynos5250-dwusb3" - "samsung,exynos5433-dwusb3" - "samsung,exynos7-dwusb3" - "sprd,sc9860-dwc3" - "st,stih407-dwc3" - "ti,am437x-dwc3" - "ti,dwc3" - "ti,keystone-dwc3" - "rockchip,rk3399-dwc3" - "xlnx,zynqmp-dwc3" - -Optional properties: - - usb-phy : array of phandle for the PHY device. The first element - in the array is expected to be a handle to the USB2/HS PHY and - the second element is expected to be a handle to the USB3/SS PHY - - phys: from the *Generic PHY* bindings - - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" - or "usb3-phy". - - resets: set of phandle and reset specifier pairs - - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command - failure SW work-around for DWC_usb31 version 1.70a-ea06 - and prior. - - snps,disable_scramble_quirk: true when SW should disable data scrambling. - Only really useful for FPGA builds. - - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled - - snps,lpm-nyet-threshold: LPM NYET threshold - - snps,u2exit_lfps_quirk: set if we want to enable u2exit lfps quirk - - snps,u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk - - snps,req_p1p2p3_quirk: when set, the core will always request for - P1/P2/P3 transition sequence. - - snps,del_p1p2p3_quirk: when set core will delay P1/P2/P3 until a certain - amount of 8B10B errors occur. - - snps,del_phy_power_chg_quirk: when set core will delay PHY power change - from P0 to P1/P2/P3. - - snps,lfps_filter_quirk: when set core will filter LFPS reception. - - snps,rx_detect_poll_quirk: when set core will disable a 400us delay to start - Polling LFPS after RX.Detect. - - snps,tx_de_emphasis_quirk: when set core will set Tx de-emphasis value. - - snps,tx_de_emphasis: the value driven to the PHY is controlled by the - LTSSM during USB3 Compliance mode. - - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy. - - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy. - - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG, - disabling the suspend signal to the PHY. - - snps,dis-u1-entry-quirk: set if link entering into U1 needs to be disabled. - - snps,dis-u2-entry-quirk: set if link entering into U2 needs to be disabled. - - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection - in PHY P3 power state. - - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists - in GUSB2PHYCFG, specify that USB2 PHY doesn't provide - a free-running PHY clock. - - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power - from P0 to P1/P2/P3 without delay. - - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check - during HS transmit. - - snps,parkmode-disable-ss-quirk: when set, all SuperSpeed bus instances in - park mode are disabled. - - snps,dis_metastability_quirk: when set, disable metastability workaround. - CAUTION: use only if you are absolutely sure of it. - - snps,dis-split-quirk: when set, change the way URBs are handled by the - driver. Needed to avoid -EPROTO errors with usbhid - on some devices (Hikey 970). - - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal - utmi_l1_suspend_n, false when asserts utmi_sleep_n - - snps,hird-threshold: HIRD threshold - - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for - UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3. - - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ - register for post-silicon frame length adjustment when the - fladj_30mhz_sdbnd signal is invalid or incorrect. - - snps,rx-thr-num-pkt-prd: periodic ESS RX packet threshold count - host mode - only. Set this and rx-max-burst-prd to a valid, - non-zero value 1-16 (DWC_usb31 programming guide - section 1.2.4) to enable periodic ESS RX threshold. - - snps,rx-max-burst-prd: max periodic ESS RX burst size - host mode only. Set - this and rx-thr-num-pkt-prd to a valid, non-zero value - 1-16 (DWC_usb31 programming guide section 1.2.4) to - enable periodic ESS RX threshold. - - snps,tx-thr-num-pkt-prd: periodic ESS TX packet threshold count - host mode - only. Set this and tx-max-burst-prd to a valid, - non-zero value 1-16 (DWC_usb31 programming guide - section 1.2.3) to enable periodic ESS TX threshold. - - snps,tx-max-burst-prd: max periodic ESS TX burst size - host mode only. Set - this and tx-thr-num-pkt-prd to a valid, non-zero value - 1-16 (DWC_usb31 programming guide section 1.2.3) to - enable periodic ESS TX threshold. - - - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. - - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0 - register, undefined length INCR burst type enable and INCRx type. - When just one value, which means INCRX burst mode enabled. When - more than one value, which means undefined length INCR burst type - enabled. The values can be 1, 4, 8, 16, 32, 64, 128 and 256. - - - in addition all properties from usb-xhci.txt from the current directory are - supported as well - - -This is usually a subnode to DWC3 glue to which it is connected. - -dwc3@4a030000 { - compatible = "snps,dwc3"; - reg = <0x4a030000 0xcfff>; - interrupts = <0 92 4> - usb-phy = <&usb2_phy>, <&usb3,phy>; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -}; diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index 6aae1544f240..f7ae79825d7d 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -93,7 +93,7 @@ Sub-nodes: The dwc3 core should be added as subnode to Exynos dwc3 glue. - dwc3 : The binding details of dwc3 can be found in: - Documentation/devicetree/bindings/usb/dwc3.txt + Documentation/devicetree/bindings/usb/snps,dwc3.yaml Example: usb@12000000 { diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml new file mode 100644 index 000000000000..cb4c6f6d3a33 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP iMX8MP Soc USB Controller + +maintainers: + - Li Jun <jun.li@nxp.com> + +properties: + compatible: + const: fsl,imx8mp-dwc3 + + reg: + maxItems: 1 + description: Address and length of the register set for the wrapper of + dwc3 core on the SOC. + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + dma-ranges: + description: + See section 2.3.9 of the DeviceTree Specification. + + ranges: true + + interrupts: + maxItems: 1 + description: The interrupt that is asserted when a wakeup event is + received. + + clocks: + description: + A list of phandle and clock-specifier pairs for the clocks + listed in clock-names. + items: + - description: system hsio root clock. + - description: suspend clock, used for usb wakeup logic. + + clock-names: + items: + - const: hsio + - const: suspend + +# Required child node: + +patternProperties: + "^dwc3@[0-9a-f]+$": + type: object + description: + A child node must exist to represent the core DWC3 IP block + The content of the node is defined in dwc3.txt. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - dma-ranges + - ranges + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + usb3_0: usb@32f10100 { + compatible = "fsl,imx8mp-dwc3"; + reg = <0x32f10100 0x8>; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_USB_ROOT>; + clock-names = "hsio", "suspend"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x40000000 0x40000000 0xc0000000>; + ranges; + + dwc3@38100000 { + compatible = "snps,dwc3"; + reg = <0x38100000 0x10000>; + clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_USB_CORE_REF>, + <&clk IMX8MP_CLK_USB_ROOT>; + clock-names = "bus_early", "ref", "suspend"; + assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; + assigned-clock-rates = <500000000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy0>, <&usb3_phy0>; + phy-names = "usb2-phy", "usb3-phy"; + snps,dis-u2-freeclk-exists-quirk; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 247ef00381ea..6816de7dfc00 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -24,8 +24,53 @@ allOf: properties: compatible: - contains: - const: generic-ehci + oneOf: + - items: + - enum: + - allwinner,sun4i-a10-ehci + - allwinner,sun50i-a64-ehci + - allwinner,sun50i-h6-ehci + - allwinner,sun5i-a13-ehci + - allwinner,sun6i-a31-ehci + - allwinner,sun7i-a20-ehci + - allwinner,sun8i-a23-ehci + - allwinner,sun8i-h3-ehci + - allwinner,sun8i-r40-ehci + - allwinner,sun9i-a80-ehci + - aspeed,ast2400-ehci + - aspeed,ast2500-ehci + - aspeed,ast2600-ehci + - brcm,bcm3384-ehci + - brcm,bcm63268-ehci + - brcm,bcm6328-ehci + - brcm,bcm6358-ehci + - brcm,bcm6362-ehci + - brcm,bcm6368-ehci + - brcm,bcm7125-ehci + - brcm,bcm7346-ehci + - brcm,bcm7358-ehci + - brcm,bcm7360-ehci + - brcm,bcm7362-ehci + - brcm,bcm7420-ehci + - brcm,bcm7425-ehci + - brcm,bcm7435-ehci + - ibm,476gtr-ehci + - nxp,lpc1850-ehci + - qca,ar7100-ehci + - snps,hsdk-v1.0-ehci + - socionext,uniphier-ehci + - const: generic-ehci + - items: + - enum: + - cavium,octeon-6335-ehci + - ibm,usb-ehci-440epx + - ibm,usb-ehci-460ex + - nintendo,hollywood-usb-ehci + - st,spear600-ehci + - const: usb-ehci + - enum: + - generic-ehci + - usb-ehci reg: minItems: 1 @@ -101,7 +146,7 @@ additionalProperties: false examples: - | usb@e0000300 { - compatible = "ibm,usb-ehci-440epx", "generic-ehci"; + compatible = "ibm,usb-ehci-440epx", "usb-ehci"; interrupt-parent = <&UIC0>; interrupts = <0x1a 4>; reg = <0xe0000300 90>, <0xe0000390 70>; diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index 2178bcc401bc..53df281f618c 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -14,8 +14,38 @@ maintainers: properties: compatible: - contains: - const: generic-ohci + oneOf: + - items: + - enum: + - allwinner,sun4i-a10-ohci + - allwinner,sun50i-a64-ohci + - allwinner,sun50i-h6-ohci + - allwinner,sun5i-a13-ohci + - allwinner,sun6i-a31-ohci + - allwinner,sun7i-a20-ohci + - allwinner,sun8i-a23-ohci + - allwinner,sun8i-h3-ohci + - allwinner,sun8i-r40-ohci + - allwinner,sun9i-a80-ohci + - brcm,bcm3384-ohci + - brcm,bcm63268-ohci + - brcm,bcm6328-ohci + - brcm,bcm6358-ohci + - brcm,bcm6362-ohci + - brcm,bcm6368-ohci + - brcm,bcm7125-ohci + - brcm,bcm7346-ohci + - brcm,bcm7358-ohci + - brcm,bcm7360-ohci + - brcm,bcm7362-ohci + - brcm,bcm7420-ohci + - brcm,bcm7425-ohci + - brcm,bcm7435-ohci + - ibm,476gtr-ohci + - ingenic,jz4740-ohci + - snps,hsdk-v1.0-ohci + - const: generic-ohci + - const: generic-ohci reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/usb/generic-xhci.yaml b/Documentation/devicetree/bindings/usb/generic-xhci.yaml new file mode 100644 index 000000000000..23d73df96ea3 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/generic-xhci.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/generic-xhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB xHCI Controller Device Tree Bindings + +maintainers: + - Mathias Nyman <mathias.nyman@intel.com> + +allOf: + - $ref: "usb-xhci.yaml#" + +properties: + compatible: + oneOf: + - description: Generic xHCI device + const: generic-xhci + - description: Armada 37xx/375/38x/8k SoCs + items: + - enum: + - marvell,armada3700-xhci + - marvell,armada-375-xhci + - marvell,armada-380-xhci + - marvell,armada-8k-xhci + - const: generic-xhci + - description: Broadcom STB SoCs with xHCI + enum: + - brcm,xhci-brcm-v2 + - brcm,bcm7445-xhci + - description: Generic xHCI device + const: xhci-platform + deprecated: true + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: reg + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + usb@f0931000 { + compatible = "generic-xhci"; + reg = <0xf0931000 0x8c8>; + interrupts = <0x0 0x4e 0x0>; + }; diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt deleted file mode 100644 index ba472e7aefc9..000000000000 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ /dev/null @@ -1,57 +0,0 @@ -Generic USB Properties - -Optional properties: - - maximum-speed: tells USB controllers we want to work up to a certain - speed. Valid arguments are "super-speed-plus", - "super-speed", "high-speed", "full-speed" and - "low-speed". In case this isn't passed via DT, USB - controllers should default to their maximum HW - capability. - - dr_mode: tells Dual-Role USB controllers that we want to work on a - particular mode. Valid arguments are "host", - "peripheral" and "otg". In case this attribute isn't - passed via DT, USB DRD controllers should default to - OTG. - - phy_type: tells USB controllers that we want to configure the core to support - a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is - selected. Valid arguments are "utmi" and "utmi_wide". - In case this isn't passed via DT, USB controllers should - default to HW capability. - - otg-rev: tells usb driver the release number of the OTG and EH supplement - with which the device and its descriptors are compliant, - in binary-coded decimal (i.e. 2.0 is 0200H). This - property is used if any real OTG features(HNP/SRP/ADP) - is enabled, if ADP is required, otg-rev should be - 0x0200 or above. - - companion: phandle of a companion - - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP - is the basic function of real OTG except you want it - to be a srp-capable only B device. - - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is - optional for OTG device. - - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is - optional for OTG device. - - usb-role-switch: boolean, indicates that the device is capable of assigning - the USB data role (USB host or USB device) for a given - USB connector, such as Type-C, Type-B(micro). - see connector/usb-connector.yaml. - - role-switch-default-mode: indicating if usb-role-switch is enabled, the - device default operation mode of controller while usb - role is USB_ROLE_NONE. Valid arguments are "host" and - "peripheral". Defaults to "peripheral" if not - specified. - - -This is an attribute to a USB controller such as: - -dwc3@4a030000 { - compatible = "synopsys,dwc3"; - reg = <0x4a030000 0xcfff>; - interrupts = <0 92 4> - usb-phy = <&usb2_phy>, <&usb3,phy>; - maximum-speed = "super-speed"; - dr_mode = "otg"; - phy_type = "utmi_wide"; - otg-rev = <0x0200>; - adp-disable; -}; diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml index dd32c10ce6c7..43b91ab62004 100644 --- a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml @@ -34,11 +34,8 @@ properties: # Required child node: patternProperties: - "^dwc3@[0-9a-f]+$": - type: object - description: - A child node must exist to represent the core DWC3 IP block. - The content of the node is defined in dwc3.txt. + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# required: - compatible @@ -68,7 +65,7 @@ examples: #address-cells = <1>; #size-cells = <1>; - dwc3@34000000 { + usb@34000000 { compatible = "snps,dwc3"; reg = <0x34000000 0x10000>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt deleted file mode 100644 index 42d8814f903a..000000000000 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt +++ /dev/null @@ -1,121 +0,0 @@ -MT8173 xHCI - -The device node for Mediatek SOC USB3.0 host controller - -There are two scenarios: the first one only supports xHCI driver; -the second one supports dual-role mode, and the host is based on xHCI -driver. Take account of backward compatibility, we divide bindings -into two parts. - -1st: only supports xHCI driver ------------------------------------------------------------------------- - -Required properties: - - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci", - soc-model is the name of SoC, such as mt8173, mt2712 etc, when using - "mediatek,mtk-xhci" compatible string, you need SoC specific ones in - addition, one of: - - "mediatek,mt8173-xhci" - - reg : specifies physical base address and size of the registers - - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control - - interrupts : interrupt used by the controller - - power-domains : a phandle to USB power domain node to control USB's - mtcmos - - vusb33-supply : regulator of USB avdd3.3v - - - clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names - - clock-names : must contain - "sys_ck": controller clock used by normal mode, - the following ones are optional: - "ref_ck": reference clock used by low power mode etc, - "mcu_ck": mcu_bus clock for register access, - "dma_ck": dma_bus clock for data transfer by DMA, - "xhci_ck": controller clock - - - phys : see usb-hcd.yaml in the current directory - -Optional properties: - - wakeup-source : enable USB remote wakeup; - - mediatek,syscon-wakeup : phandle to syscon used to access the register - of the USB wakeup glue layer between xHCI and SPM; it depends on - "wakeup-source", and has two arguments: - - the first one : register base address of the glue layer in syscon; - - the second one : hardware version of the glue layer - - 1 : used by mt8173 etc - - 2 : used by mt2712 etc - - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, - bit1 for u3port1, ... etc; - - vbus-supply : reference to the VBUS regulator; - - usb3-lpm-capable : supports USB3.0 LPM - - pinctrl-names : a pinctrl state named "default" must be defined - - pinctrl-0 : pin control group - See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - - imod-interval-ns: default interrupt moderation interval is 5000ns - -additionally the properties from usb-hcd.yaml (in the current directory) are -supported. - -Example: -usb30: usb@11270000 { - compatible = "mediatek,mt8173-xhci"; - reg = <0 0x11270000 0 0x1000>, - <0 0x11280700 0 0x0100>; - reg-names = "mac", "ippc"; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, - <&pericfg CLK_PERI_USB0>, - <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", "ref_ck"; - phys = <&phy_port0 PHY_TYPE_USB3>, - <&phy_port1 PHY_TYPE_USB2>; - vusb33-supply = <&mt6397_vusb_reg>; - vbus-supply = <&usb_p1_vbus>; - usb3-lpm-capable; - mediatek,syscon-wakeup = <&pericfg 0x400 1>; - wakeup-source; - imod-interval-ns = <10000>; -}; - -2nd: dual-role mode with xHCI driver ------------------------------------------------------------------------- - -In the case, xhci is added as subnode to mtu3. An example and the DT binding -details of mtu3 can be found in: -Documentation/devicetree/bindings/usb/mediatek,mtu3.txt - -Required properties: - - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci", - soc-model is the name of SoC, such as mt8173, mt2712 etc, when using - "mediatek,mtk-xhci" compatible string, you need SoC specific ones in - addition, one of: - - "mediatek,mt8173-xhci" - - reg : specifies physical base address and size of the registers - - reg-names: should be "mac" for xHCI MAC - - interrupts : interrupt used by the host controller - - power-domains : a phandle to USB power domain node to control USB's - mtcmos - - vusb33-supply : regulator of USB avdd3.3v - - - clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names - - clock-names : must contain "sys_ck", and the following ones are optional: - "ref_ck", "mcu_ck" and "dma_ck", "xhci_ck" - -Optional properties: - - vbus-supply : reference to the VBUS regulator; - - usb3-lpm-capable : supports USB3.0 LPM - -Example: -usb30: usb@11270000 { - compatible = "mediatek,mt8173-xhci"; - reg = <0 0x11270000 0 0x1000>; - reg-names = "mac"; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; - clock-names = "sys_ck", "ref_ck"; - vusb33-supply = <&mt6397_vusb_reg>; - usb3-lpm-capable; -}; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml new file mode 100644 index 000000000000..14f40efb3b22 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek USB3 xHCI Device Tree Bindings + +maintainers: + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +allOf: + - $ref: "usb-xhci.yaml" + +description: | + There are two scenarios: + case 1: only supports xHCI driver; + case 2: supports dual-role mode, and the host is based on xHCI driver. + +properties: + # common properties for both case 1 and case 2 + compatible: + items: + - enum: + - mediatek,mt2701-xhci + - mediatek,mt2712-xhci + - mediatek,mt7622-xhci + - mediatek,mt7623-xhci + - mediatek,mt7629-xhci + - mediatek,mt8173-xhci + - mediatek,mt8183-xhci + - const: mediatek,mtk-xhci + + reg: + minItems: 1 + items: + - description: the registers of xHCI MAC + - description: the registers of IP Port Control + + reg-names: + minItems: 1 + items: + - const: mac + - const: ippc # optional, only needed for case 1. + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle to USB power domain node to control USB's MTCMOS + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: Controller clock used by normal mode + - description: Reference clock used by low power mode etc + - description: Mcu bus clock for register access + - description: DMA bus clock for data transfer + - description: controller clock + + clock-names: + minItems: 1 + items: + - const: sys_ck # required, the following ones are optional + - const: ref_ck + - const: mcu_ck + - const: dma_ck + - const: xhci_ck + + assigned-clocks: + minItems: 1 + maxItems: 5 + + assigned-clock-parents: + minItems: 1 + maxItems: 5 + + phys: + description: + List of all PHYs used on this HCD, it's better to keep PHYs in order + as the hardware layout + minItems: 1 + items: + - description: USB2/HS PHY # required, others are optional + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + + vusb33-supply: + description: Regulator of USB AVDD3.3v + + vbus-supply: + description: Regulator of USB VBUS5v + + usb3-lpm-capable: + description: supports USB3.0 LPM + type: boolean + + imod-interval-ns: + description: + Interrupt moderation interval value, it is 8 times as much as that + defined in the xHCI spec on MTK's controller. + default: 5000 + + # the following properties are only used for case 1 + wakeup-source: + description: enable USB remote wakeup, see power/wakeup-source.txt + type: boolean + + mediatek,syscon-wakeup: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + A phandle to syscon used to access the register of the USB wakeup glue + layer between xHCI and SPM, the field should always be 3 cells long. + items: + items: + - description: + The first cell represents a phandle to syscon + - description: + The second cell represents the register base address of the glue + layer in syscon + - description: + The third cell represents the hardware version of the glue layer, + 1 is used by mt8173 etc, 2 is used by mt2712 etc + enum: [1, 2] + + mediatek,u3p-dis-msk: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The mask to disable u3ports, bit0 for u3port0, + bit1 for u3port1, ... etc + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "@[0-9a-f]{1}$": + type: object + description: The hard wired USB devices. + +dependencies: + wakeup-source: [ 'mediatek,syscon-wakeup' ] + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/power/mt8173-power.h> + + usb@11270000 { + compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci"; + reg = <0x11270000 0x1000>, <0x11280700 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; + phys = <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>; + vusb33-supply = <&mt6397_vusb_reg>; + vbus-supply = <&usb_p1_vbus>; + imod-interval-ns = <10000>; + mediatek,syscon-wakeup = <&pericfg 0x400 1>; + wakeup-source; + usb3-lpm-capable; + }; +... diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt deleted file mode 100644 index a82ca438aec1..000000000000 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ /dev/null @@ -1,108 +0,0 @@ -The device node for Mediatek USB3.0 DRD controller - -Required properties: - - compatible : should be "mediatek,<soc-model>-mtu3", "mediatek,mtu3", - soc-model is the name of SoC, such as mt8173, mt2712 etc, - when using "mediatek,mtu3" compatible string, you need SoC specific - ones in addition, one of: - - "mediatek,mt8173-mtu3" - - reg : specifies physical base address and size of the registers - - reg-names: should be "mac" for device IP and "ippc" for IP port control - - interrupts : interrupt used by the device IP - - power-domains : a phandle to USB power domain node to control USB's - mtcmos - - vusb33-supply : regulator of USB avdd3.3v - - clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names - - clock-names : must contain "sys_ck" for clock of controller, - the following clocks are optional: - "ref_ck", "mcu_ck" and "dma_ck"; - - phys : see usb-hcd.yaml in the current directory - - dr_mode : should be one of "host", "peripheral" or "otg", - refer to usb/generic.txt - -Optional properties: - - #address-cells, #size-cells : should be '2' if the device has sub-nodes - with 'reg' property - - ranges : allows valid 1:1 translation between child's address space and - parent's address space - - extcon : external connector for vbus and idpin changes detection, needed - when supports dual-role mode. - it's considered valid for compatibility reasons, not allowed for - new bindings, and use "usb-role-switch" property instead. - - vbus-supply : reference to the VBUS regulator, needed when supports - dual-role mode. - it's considered valid for compatibility reasons, not allowed for - new bindings, and put into a usb-connector node. - see connector/usb-connector.yaml. - - pinctrl-names : a pinctrl state named "default" is optional, and need be - defined if auto drd switch is enabled, that means the property dr_mode - is set as "otg", and meanwhile the property "mediatek,enable-manual-drd" - is not set. - - pinctrl-0 : pin control group - See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - - - maximum-speed : valid arguments are "super-speed", "high-speed" and - "full-speed"; refer to usb/generic.txt - - usb-role-switch : use USB Role Switch to support dual-role switch, but - not extcon; see usb/generic.txt. - - enable-manual-drd : supports manual dual-role switch via debugfs; usually - used when receptacle is TYPE-A and also wants to support dual-role - mode. - - wakeup-source: enable USB remote wakeup of host mode. - - mediatek,syscon-wakeup : phandle to syscon used to access the register - of the USB wakeup glue layer between SSUSB and SPM; it depends on - "wakeup-source", and has two arguments: - - the first one : register base address of the glue layer in syscon; - - the second one : hardware version of the glue layer - - 1 : used by mt8173 etc - - 2 : used by mt2712 etc - - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, - bit1 for u3port1, ... etc; - -additionally the properties from usb-hcd.yaml (in the current directory) are -supported. - -Sub-nodes: -The xhci should be added as subnode to mtu3 as shown in the following example -if host mode is enabled. The DT binding details of xhci can be found in: -Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt - -The port would be added as subnode if use "usb-role-switch" property. - see graph.txt - -Example: -ssusb: usb@11271000 { - compatible = "mediatek,mt8173-mtu3"; - reg = <0 0x11271000 0 0x3000>, - <0 0x11280700 0 0x0100>; - reg-names = "mac", "ippc"; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>; - phys = <&phy_port0 PHY_TYPE_USB3>, - <&phy_port1 PHY_TYPE_USB2>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, - <&pericfg CLK_PERI_USB0>, - <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", "ref_ck"; - vusb33-supply = <&mt6397_vusb_reg>; - vbus-supply = <&usb_p0_vbus>; - extcon = <&extcon_usb>; - dr_mode = "otg"; - wakeup-source; - mediatek,syscon-wakeup = <&pericfg 0x400 1>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - usb_host: xhci@11270000 { - compatible = "mediatek,mt8173-xhci"; - reg = <0 0x11270000 0 0x1000>; - reg-names = "mac"; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; - clock-names = "sys_ck", "ref_ck"; - vusb33-supply = <&mt6397_vusb_reg>; - }; -}; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml new file mode 100644 index 000000000000..f5c04b9d2de9 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml @@ -0,0 +1,287 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/mediatek,mtu3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek USB3 DRD Controller Device Tree Bindings + +maintainers: + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +allOf: + - $ref: "usb-drd.yaml" + +description: | + The DRD controller has a glue layer IPPC (IP Port Control), and its host is + based on xHCI. + +properties: + compatible: + items: + - enum: + - mediatek,mt2712-mtu3 + - mediatek,mt8173-mtu3 + - mediatek,mt8183-mtu3 + - const: mediatek,mtu3 + + reg: + items: + - description: the registers of device MAC + - description: the registers of IP Port Control + + reg-names: + items: + - const: mac + - const: ippc + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle to USB power domain node to control USB's MTCMOS + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: Controller clock used by normal mode + - description: Reference clock used by low power mode etc + - description: Mcu bus clock for register access + - description: DMA bus clock for data transfer + + clock-names: + minItems: 1 + items: + - const: sys_ck # required, others are optional + - const: ref_ck + - const: mcu_ck + - const: dma_ck + + phys: + description: + List of all the USB PHYs used, it's better to keep the sequence + as the hardware layout. + minItems: 1 + items: + - description: USB2/HS PHY # required, others are optional + - description: USB3/SS(P) PHY + - description: USB2/HS PHY # the following for backward compatible + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + + vusb33-supply: + description: Regulator of USB AVDD3.3v + + vbus-supply: + deprecated: true + description: | + Regulator of USB VBUS5v, needed when supports dual-role mode. + Particularly, if use an output GPIO to control a VBUS regulator, should + model it as a regulator. See bindings/regulator/fixed-regulator.yaml + It's considered valid for compatibility reasons, not allowed for + new bindings, and put into a usb-connector node. + + dr_mode: + enum: [host, peripheral, otg] + default: otg + + maximum-speed: + enum: [super-speed-plus, super-speed, high-speed, full-speed] + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + ranges: true + + extcon: + deprecated: true + description: | + Phandle to the extcon device detecting the IDDIG/VBUS state, neede + when supports dual-role mode. + It's considered valid for compatibility reasons, not allowed for + new bindings, and use "usb-role-switch" property instead. + + usb-role-switch: + $ref: /schemas/types.yaml#/definitions/flag + description: Support role switch. + type: boolean + + connector: + $ref: /connector/usb-connector.yaml# + description: + Connector for dual role switch, especially for "gpio-usb-b-connector" + type: object + + port: + description: + Any connector to the data bus of this controller should be modelled + using the OF graph bindings specified, if the "usb-role-switch" + property is used. See graph.txt + type: object + + enable-manual-drd: + $ref: /schemas/types.yaml#/definitions/flag + description: + supports manual dual-role switch via debugfs; usually used when + receptacle is TYPE-A and also wants to support dual-role mode. + type: boolean + + wakeup-source: + description: enable USB remote wakeup, see power/wakeup-source.txt + type: boolean + + mediatek,syscon-wakeup: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + A phandle to syscon used to access the register of the USB wakeup glue + layer between xHCI and SPM, the field should always be 3 cells long. + items: + items: + - description: + The first cell represents a phandle to syscon + - description: + The second cell represents the register base address of the glue + layer in syscon + - description: + The third cell represents the hardware version of the glue layer, + 1 is used by mt8173 etc, 2 is used by mt2712 etc + enum: [1, 2] + + mediatek,u3p-dis-msk: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The mask to disable u3ports, bit0 for u3port0, + bit1 for u3port1, ... etc + +# Required child node when support dual-role +patternProperties: + "^usb@[0-9a-f]+$": + type: object + $ref: /usb/mediatek,mtk-xhci.yaml# + description: + The xhci should be added as subnode to mtu3 as shown in the following + example if the host mode is enabled. + +dependencies: + connector: [ 'usb-role-switch' ] + port: [ 'usb-role-switch' ] + wakeup-source: [ 'mediatek,syscon-wakeup' ] + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + # Dual role switch by extcon + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/power/mt8173-power.h> + + usb@11271000 { + compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3"; + reg = <0x11271000 0x3000>, <0x11280700 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>; + phys = <&phy_port0 PHY_TYPE_USB3>, <&phy_port1 PHY_TYPE_USB2>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + vusb33-supply = <&mt6397_vusb_reg>; + vbus-supply = <&usb_p0_vbus>; + extcon = <&extcon_usb>; + dr_mode = "otg"; + wakeup-source; + mediatek,syscon-wakeup = <&pericfg 0x400 1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + xhci: usb@11270000 { + compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci"; + reg = <0x11270000 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; + vusb33-supply = <&mt6397_vusb_reg>; + }; + }; + + # Enable/disable device by an input gpio for VBUS pin + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/power/mt2712-power.h> + + usb@112c1000 { + compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3"; + reg = <0x112c1000 0x3000>, <0x112d0700 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_LOW>; + phys = <&u2port2 PHY_TYPE_USB2>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + dr_mode = "peripheral"; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + vbus-gpios = <&pio 13 GPIO_ACTIVE_HIGH>; + }; + }; + + # Dual role switch with type-c + - | + usb@11201000 { + compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; + reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; + phys = <&u2port0 PHY_TYPE_USB2>; + clocks = <&clk26m>; + clock-names = "sys_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 1>; + wakeup-source; + dr_mode = "otg"; + usb-role-switch; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + host: usb@11200000 { + compatible = "mediatek,mt8183-xhci", "mediatek,mtk-xhci"; + reg = <0x11200000 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>; + clock-names = "sys_ck"; + }; + + port { + usb_role_sw: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt deleted file mode 100644 index 5eedb0296562..000000000000 --- a/Documentation/devicetree/bindings/usb/mediatek,musb.txt +++ /dev/null @@ -1,57 +0,0 @@ -MediaTek musb DRD/OTG controller -------------------------------------------- - -Required properties: - - compatible : should be one of: - "mediatek,mt2701-musb" - ... - followed by "mediatek,mtk-musb" - - reg : specifies physical base address and size of - the registers - - interrupts : interrupt used by musb controller - - interrupt-names : must be "mc" - - phys : PHY specifier for the OTG phy - - dr_mode : should be one of "host", "peripheral" or "otg", - refer to usb/generic.txt - - clocks : a list of phandle + clock-specifier pairs, one for - each entry in clock-names - - clock-names : must contain "main", "mcu", "univpll" - for clocks of controller - -Optional properties: - - power-domains : a phandle to USB power domain node to control USB's - MTCMOS - -Required child nodes: - usb connector node as defined in bindings/connector/usb-connector.yaml -Optional properties: - - id-gpios : input GPIO for USB ID pin. - - vbus-gpios : input GPIO for USB VBUS pin. - - vbus-supply : reference to the VBUS regulator, needed when supports - dual-role mode - - usb-role-switch : use USB Role Switch to support dual-role switch, see - usb/generic.txt. - -Example: - -usb2: usb@11200000 { - compatible = "mediatek,mt2701-musb", - "mediatek,mtk-musb"; - reg = <0 0x11200000 0 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "mc"; - phys = <&u2port2 PHY_TYPE_USB2>; - dr_mode = "otg"; - clocks = <&pericfg CLK_PERI_USB0>, - <&pericfg CLK_PERI_USB0_MCU>, - <&pericfg CLK_PERI_USB_SLV>; - clock-names = "main","mcu","univpll"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; - usb-role-switch; - connector{ - compatible = "gpio-usb-b-connector", "usb-b-connector"; - type = "micro"; - id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>; - vbus-supply = <&usb_vbus>; - }; -}; diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.yaml b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml new file mode 100644 index 000000000000..84ddacfdbe9b --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/mediatek,musb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MUSB DRD/OTG Controller Device Tree Bindings + +maintainers: + - Min Guo <min.guo@mediatek.com> + +properties: + $nodename: + pattern: '^usb@[0-9a-f]+$' + + compatible: + items: + - enum: + - mediatek,mt8516-musb + - mediatek,mt2701-musb + - const: mediatek,mtk-musb + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: mc + + clocks: + items: + - description: The main/core clock + - description: The system bus clock + - description: The 48Mhz clock + + clock-names: + items: + - const: main + - const: mcu + - const: univpll + + phys: + maxItems: 1 + + usb-role-switch: + $ref: /schemas/types.yaml#/definitions/flag + description: Support role switch. See usb/generic.txt + type: boolean + + dr_mode: + enum: + - host + - otg + - peripheral + + power-domains: + description: A phandle to USB power domain node to control USB's MTCMOS + maxItems: 1 + + connector: + $ref: /connector/usb-connector.yaml# + description: Connector for dual role switch + type: object + +dependencies: + usb-role-switch: [ 'connector' ] + connector: [ 'usb-role-switch' ] + +required: + - compatible + - reg + - interrupts + - interrupt-names + - phys + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/power/mt2701-power.h> + + usb@11200000 { + compatible = "mediatek,mt2701-musb", "mediatek,mtk-musb"; + reg = <0x11200000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "mc"; + phys = <&u2port2 PHY_TYPE_USB2>; + dr_mode = "otg"; + clocks = <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB0_MCU>, + <&pericfg CLK_PERI_USB_SLV>; + clock-names = "main","mcu","univpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb_vbus>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 38d9bb8507cf..f0dbc5ae45ae 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -65,7 +65,7 @@ Sub-nodes: The dwc3 core should be added as subnode to omap dwc3 glue. - dwc3 : The binding details of dwc3 can be found in: - Documentation/devicetree/bindings/usb/dwc3.txt + Documentation/devicetree/bindings/usb/snps,dwc3.yaml omap_dwc3 { compatible = "ti,dwc3"; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index fd93b941f07a..c3cbd1fa9944 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -18,6 +18,9 @@ properties: - qcom,sc7180-dwc3 - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 + - qcom,sm8150-dwc3 + - qcom,sm8250-dwc3 + - qcom,sm8350-dwc3 - const: qcom,dwc3 reg: @@ -104,11 +107,8 @@ properties: # Required child node: patternProperties: - "^dwc3@[0-9a-f]+$": - type: object - description: - A child node must exist to represent the core DWC3 IP block - The content of the node is defined in dwc3.txt. + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# required: - compatible @@ -163,7 +163,7 @@ examples: resets = <&gcc GCC_USB30_PRIM_BCR>; - dwc3@a600000 { + usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml index 22603256ddf8..4c5efaf02308 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml @@ -11,7 +11,7 @@ maintainers: - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> allOf: - - $ref: "usb-hcd.yaml" + - $ref: "usb-xhci.yaml" properties: compatible: @@ -68,7 +68,7 @@ required: - power-domains - resets -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt deleted file mode 100644 index 94520493233b..000000000000 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ /dev/null @@ -1,56 +0,0 @@ -Rockchip SuperSpeed DWC3 USB SoC controller - -Required properties: -- compatible: should contain "rockchip,rk3399-dwc3" for rk3399 SoC -- clocks: A list of phandle + clock-specifier pairs for the - clocks listed in clock-names -- clock-names: Should contain the following: - "ref_clk" Controller reference clk, have to be 24 MHz - "suspend_clk" Controller suspend clk, have to be 24 MHz or 32 KHz - "bus_clk" Master/Core clock, have to be >= 62.5 MHz for SS - operation and >= 30MHz for HS operation - "grf_clk" Controller grf clk - -Required child node: -A child node must exist to represent the core DWC3 IP block. The name of -the node is not important. The content of the node is defined in dwc3.txt. - -Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml - USB2.0 PHY -Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt - Type-C PHY - -Example device nodes: - - usbdrd3_0: usb@fe800000 { - compatible = "rockchip,rk3399-dwc3"; - clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, - <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>; - clock-names = "ref_clk", "suspend_clk", - "bus_clk", "grf_clk"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - usbdrd_dwc3_0: dwc3@fe800000 { - compatible = "snps,dwc3"; - reg = <0x0 0xfe800000 0x0 0x100000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "otg"; - }; - }; - - usbdrd3_1: usb@fe900000 { - compatible = "rockchip,rk3399-dwc3"; - clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, - <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>; - clock-names = "ref_clk", "suspend_clk", - "bus_clk", "grf_clk"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - usbdrd_dwc3_1: dwc3@fe900000 { - compatible = "snps,dwc3"; - reg = <0x0 0xfe900000 0x0 0x100000>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "otg"; - }; - }; diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml new file mode 100644 index 000000000000..04077f2d7faf --- /dev/null +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/rockchip,dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SuperSpeed DWC3 USB SoC controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: + The common content of the node is defined in snps,dwc3.yaml. + + Phy documentation is provided in the following places. + + USB2.0 PHY + Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml + + Type-C PHY + Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt + +allOf: + - $ref: snps,dwc3.yaml# + +select: + properties: + compatible: + contains: + enum: + - rockchip,rk3328-dwc3 + - rockchip,rk3399-dwc3 + required: + - compatible + +properties: + compatible: + items: + - enum: + - rockchip,rk3328-dwc3 + - rockchip,rk3399-dwc3 + - const: snps,dwc3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + items: + - description: + Controller reference clock, must to be 24 MHz + - description: + Controller suspend clock, must to be 24 MHz or 32 KHz + - description: + Master/Core clock, must to be >= 62.5 MHz for SS + operation and >= 30MHz for HS operation + - description: + Controller grf clock + + clock-names: + minItems: 3 + items: + - const: ref_clk + - const: suspend_clk + - const: bus_clk + - const: grf_clk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: usb3-otg + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + usbdrd3_0: usb@fe800000 { + compatible = "rockchip,rk3399-dwc3", "snps,dwc3"; + reg = <0x0 0xfe800000 0x0 0x100000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "grf_clk"; + dr_mode = "otg"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml new file mode 100644 index 000000000000..2247da77eac1 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -0,0 +1,332 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/snps,dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare USB3 Controller + +maintainers: + - Felipe Balbi <balbi@kernel.org> + +description: + This is usually a subnode to DWC3 glue to which it is connected, but can also + be presented as a standalone DT node with an optional vendor-specific + compatible string. + +allOf: + - $ref: usb-drd.yaml# + - if: + properties: + dr_mode: + const: peripheral + + required: + - dr_mode + then: + $ref: usb.yaml# + else: + $ref: usb-xhci.yaml# + +properties: + compatible: + contains: + oneOf: + - const: snps,dwc3 + - const: synopsys,dwc3 + deprecated: true + + interrupts: + description: + It's either a single common DWC3 interrupt (dwc_usb3) or individual + interrupts for the host, gadget and DRD modes. + minItems: 1 + maxItems: 3 + + interrupt-names: + minItems: 1 + maxItems: 3 + oneOf: + - const: dwc_usb3 + - items: + enum: [host, peripheral, otg] + + clocks: + description: + In general the core supports three types of clocks. bus_early is a + SoC Bus Clock (AHB/AXI/Native). ref generates ITP when the UTMI/ULPI + PHY is suspended. suspend clocks a small part of the USB3 core when + SS PHY in P3. But particular cases may differ from that having less + or more clock sources with another names. + + clock-names: + contains: + anyOf: + - enum: [bus_early, ref, suspend] + - true + + usb-phy: + minItems: 1 + items: + - description: USB2/HS PHY + - description: USB3/SS PHY + + phys: + minItems: 1 + items: + - description: USB2/HS PHY + - description: USB3/SS PHY + + phy-names: + minItems: 1 + items: + - const: usb2-phy + - const: usb3-phy + + resets: + minItems: 1 + + snps,usb2-lpm-disable: + description: Indicate if we don't want to enable USB2 HW LPM + type: boolean + + snps,usb3_lpm_capable: + description: Determines if platform is USB3 LPM capable + type: boolean + + snps,dis-start-transfer-quirk: + description: + When set, disable isoc START TRANSFER command failure SW work-around + for DWC_usb31 version 1.70a-ea06 and prior. + type: boolean + + snps,disable_scramble_quirk: + description: + True when SW should disable data scrambling. Only really useful for FPGA + builds. + type: boolean + + snps,has-lpm-erratum: + description: True when DWC3 was configured with LPM Erratum enabled + type: boolean + + snps,lpm-nyet-threshold: + description: LPM NYET threshold + $ref: /schemas/types.yaml#/definitions/uint8 + + snps,u2exit_lfps_quirk: + description: Set if we want to enable u2exit lfps quirk + type: boolean + + snps,u2ss_inp3_quirk: + description: Set if we enable P3 OK for U2/SS Inactive quirk + type: boolean + + snps,req_p1p2p3_quirk: + description: + When set, the core will always request for P1/P2/P3 transition sequence. + type: boolean + + snps,del_p1p2p3_quirk: + description: + When set core will delay P1/P2/P3 until a certain amount of 8B10B errors + occur. + type: boolean + + snps,del_phy_power_chg_quirk: + description: When set core will delay PHY power change from P0 to P1/P2/P3. + type: boolean + + snps,lfps_filter_quirk: + description: When set core will filter LFPS reception. + type: boolean + + snps,rx_detect_poll_quirk: + description: + when set core will disable a 400us delay to start Polling LFPS after + RX.Detect. + type: boolean + + snps,tx_de_emphasis_quirk: + description: When set core will set Tx de-emphasis value + type: boolean + + snps,tx_de_emphasis: + description: + The value driven to the PHY is controlled by the LTSSM during USB3 + Compliance mode. + $ref: /schemas/types.yaml#/definitions/uint8 + enum: + - 0 # -6dB de-emphasis + - 1 # -3.5dB de-emphasis + - 2 # No de-emphasis + + snps,dis_u3_susphy_quirk: + description: When set core will disable USB3 suspend phy + type: boolean + + snps,dis_u2_susphy_quirk: + description: When set core will disable USB2 suspend phy + type: boolean + + snps,dis_enblslpm_quirk: + description: + When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal + to the PHY. + type: boolean + + snps,dis-u1-entry-quirk: + description: Set if link entering into U1 needs to be disabled + type: boolean + + snps,dis-u2-entry-quirk: + description: Set if link entering into U2 needs to be disabled + type: boolean + + snps,dis_rxdet_inp3_quirk: + description: + When set core will disable receiver detection in PHY P3 power state. + type: boolean + + snps,dis-u2-freeclk-exists-quirk: + description: + When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2 + PHY doesn't provide a free-running PHY clock. + type: boolean + + snps,dis-del-phy-power-chg-quirk: + description: + When set core will change PHY power from P0 to P1/P2/P3 without delay. + type: boolean + + snps,dis-tx-ipgap-linecheck-quirk: + description: When set, disable u2mac linestate check during HS transmit + type: boolean + + snps,parkmode-disable-ss-quirk: + description: + When set, all SuperSpeed bus instances in park mode are disabled. + type: boolean + + snps,dis_metastability_quirk: + description: + When set, disable metastability workaround. CAUTION! Use only if you are + absolutely sure of it. + type: boolean + + snps,dis-split-quirk: + description: + When set, change the way URBs are handled by the driver. Needed to + avoid -EPROTO errors with usbhid on some devices (Hikey 970). + type: boolean + + snps,is-utmi-l1-suspend: + description: + True when DWC3 asserts output signal utmi_l1_suspend_n, false when + asserts utmi_sleep_n. + type: boolean + + snps,hird-threshold: + description: HIRD threshold + $ref: /schemas/types.yaml#/definitions/uint8 + + snps,hsphy_interface: + description: + High-Speed PHY interface selection between UTMI+ and ULPI when the + DWC_USB3_HSPHY_INTERFACE has value 3. + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [utmi, ulpi] + + snps,quirk-frame-length-adjustment: + description: + Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame + length adjustment when the fladj_30mhz_sdbnd signal is invalid or + incorrect. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x3f + + snps,rx-thr-num-pkt-prd: + description: + Periodic ESS RX packet threshold count (host mode only). Set this and + snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.4) to enable periodic ESS RX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,rx-max-burst-prd: + description: + Max periodic ESS RX burst size (host mode only). Set this and + snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.4) to enable periodic ESS RX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-thr-num-pkt-prd: + description: + Periodic ESS TX packet threshold count (host mode only). Set this and + snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.3) to enable periodic ESS TX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-max-burst-prd: + description: + Max periodic ESS TX burst size (host mode only). Set this and + snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.3) to enable periodic ESS TX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + tx-fifo-resize: + description: Determines if the FIFO *has* to be reallocated + deprecated: true + type: boolean + + snps,incr-burst-type-adjustment: + description: + Value for INCR burst type of GSBUSCFG0 register, undefined length INCR + burst type enable and INCRx type. A single value means INCRX burst mode + enabled. If more than one value specified, undefined length INCR burst + type will be enabled with burst lengths utilized up to the maximum + of the values passed in this property. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + enum: [1, 4, 8, 16, 32, 64, 128, 256] + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + usb@4a030000 { + compatible = "snps,dwc3"; + reg = <0x4a030000 0xcfff>; + interrupts = <0 92 4>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + }; + - | + usb@4a000000 { + compatible = "snps,dwc3"; + reg = <0x4a000000 0xcfff>; + interrupts = <0 92 4>; + clocks = <&clk 1>, <&clk 2>, <&clk 3>; + clock-names = "bus_early", "ref", "suspend"; + phys = <&usb2_phy>, <&usb3_phy>; + phy-names = "usb2-phy", "usb3-phy"; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + }; +... diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml index c1b19fc5d0a2..ca7fbe3ed22e 100644 --- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -64,9 +64,7 @@ properties: patternProperties: "usb@[a-f0-9]+$": - type: object - description: This is the node representing the DWC3 controller instance - Documentation/devicetree/bindings/usb/dwc3.txt + $ref: snps,dwc3.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt deleted file mode 100644 index 036be172b1ae..000000000000 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ /dev/null @@ -1,102 +0,0 @@ -Generic USB Device Properties - -Usually, we only use device tree for hard wired USB device. -The reference binding doc is from: -http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps - -Four types of device-tree nodes are defined: "host-controller nodes" -representing USB host controllers, "device nodes" representing USB devices, -"interface nodes" representing USB interfaces and "combined nodes" -representing simple USB devices. - -A combined node shall be used instead of a device node and an interface node -for devices of class 0 or 9 (hub) with a single configuration and a single -interface. - -A "hub node" is a combined node or an interface node that represents a USB -hub. - - -Required properties for device nodes: -- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. - The textual representation of VID and PID shall be in lower case hexadecimal - with leading zeroes suppressed. The other compatible strings from the above - standard binding could also be used, but a device adhering to this binding - may leave out all except for "usbVID,PID". -- reg: the number of the USB hub port or the USB host-controller port to which - this device is attached. The range is 1-255. - - -Required properties for device nodes with interface nodes: -- #address-cells: shall be 2 -- #size-cells: shall be 0 - - -Required properties for interface nodes: -- compatible: "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is - the product id, CN is the configuration value and IN is the interface - number. The textual representation of VID, PID, CN and IN shall be in lower - case hexadecimal with leading zeroes suppressed. The other compatible - strings from the above standard binding could also be used, but a device - adhering to this binding may leave out all except for - "usbifVID,PID.configCN.IN". -- reg: the interface number and configuration value - -The configuration component is not included in the textual representation of -an interface-node unit address for configuration 1. - - -Required properties for combined nodes: -- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. - The textual representation of VID and PID shall be in lower case hexadecimal - with leading zeroes suppressed. The other compatible strings from the above - standard binding could also be used, but a device adhering to this binding - may leave out all except for "usbVID,PID". -- reg: the number of the USB hub port or the USB host-controller port to which - this device is attached. The range is 1-255. - - -Required properties for hub nodes with device nodes: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - - -Required properties for host-controller nodes with device nodes: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - - -Example: - -&usb1 { /* host controller */ - #address-cells = <1>; - #size-cells = <0>; - - hub@1 { /* hub connected to port 1 */ - compatible = "usb5e3,608"; - reg = <1>; - }; - - device@2 { /* device connected to port 2 */ - compatible = "usb123,4567"; - reg = <2>; - }; - - device@3 { /* device connected to port 3 */ - compatible = "usb123,abcd"; - reg = <3>; - - #address-cells = <2>; - #size-cells = <0>; - - interface@0 { /* interface 0 of configuration 1 */ - compatible = "usbif123,abcd.config1.0"; - reg = <0 1>; - }; - - interface@0,2 { /* interface 0 of configuration 2 */ - compatible = "usbif123,abcd.config2.0"; - reg = <0 2>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/usb/usb-device.yaml b/Documentation/devicetree/bindings/usb/usb-device.yaml new file mode 100644 index 000000000000..d4c99809ee9a --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-device.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-device.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The device tree bindings for the Generic USB Device + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +description: | + Usually, we only use device tree for hard wired USB device. + The reference binding doc is from: + http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps + + Four types of device-tree nodes are defined: "host-controller nodes" + representing USB host controllers, "device nodes" representing USB devices, + "interface nodes" representing USB interfaces and "combined nodes" + representing simple USB devices. + + A combined node shall be used instead of a device node and an interface node + for devices of class 0 or 9 (hub) with a single configuration and a single + interface. + + A "hub node" is a combined node or an interface node that represents a USB + hub. + +properties: + compatible: + pattern: "^usb[0-9a-f]{1,4},[0-9a-f]{1,4}$" + description: Device nodes or combined nodes. + "usbVID,PID", where VID is the vendor id and PID the product id. + The textual representation of VID and PID shall be in lower case + hexadecimal with leading zeroes suppressed. The other compatible + strings from the above standard binding could also be used, + but a device adhering to this binding may leave out all except + for "usbVID,PID". + + reg: + description: the number of the USB hub port or the USB host-controller + port to which this device is attached. The range is 1-255. + maxItems: 1 + + "#address-cells": + description: should be 1 for hub nodes with device nodes, + should be 2 for device nodes with interface nodes. + enum: [1, 2] + + "#size-cells": + const: 0 + +patternProperties: + "^interface@[0-9a-f]{1,2}(,[0-9a-f]{1,2})$": + type: object + description: USB interface nodes. + The configuration component is not included in the textual + representation of an interface-node unit address for configuration 1. + + properties: + compatible: + pattern: "^usbif[0-9a-f]{1,4},[0-9a-f]{1,4}.config[0-9a-f]{1,2}.[0-9a-f]{1,2}$" + description: Interface nodes. + "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is + the product id, CN is the configuration value and IN is the interface + number. The textual representation of VID, PID, CN and IN shall be + in lower case hexadecimal with leading zeroes suppressed. + The other compatible strings from the above standard binding could + also be used, but a device adhering to this binding may leave out + all except for "usbifVID,PID.configCN.IN". + + reg: + description: should be 2 cells long, the first cell represents + the interface number and the second cell represents the + configuration value. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: true + +examples: + #hub connected to port 1 + #device connected to port 2 + #device connected to port 3 + # interface 0 of configuration 1 + # interface 0 of configuration 2 + - | + usb@11270000 { + reg = <0x11270000 0x1000>; + interrupts = <0x0 0x4e 0x0>; + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb5e3,608"; + reg = <1>; + }; + + device@2 { + compatible = "usb123,4567"; + reg = <2>; + }; + + device@3 { + compatible = "usb123,abcd"; + reg = <3>; + + #address-cells = <2>; + #size-cells = <0>; + + interface@0 { + compatible = "usbif123,abcd.config1.0"; + reg = <0 1>; + }; + + interface@0,2 { + compatible = "usbif123,abcd.config2.0"; + reg = <0 2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-drd.yaml b/Documentation/devicetree/bindings/usb/usb-drd.yaml new file mode 100644 index 000000000000..f229fc8068d9 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-drd.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-drd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic USB OTG Controller Device Tree Bindings + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +properties: + otg-rev: + description: + Tells usb driver the release number of the OTG and EH supplement with + which the device and its descriptors are compliant, in binary-coded + decimal (i.e. 2.0 is 0200H). This property is used if any real OTG + features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be + 0x0200 or above. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0x0100, 0x0120, 0x0130, 0x0200] + + dr_mode: + description: + Tells Dual-Role USB controllers that we want to work on a particular + mode. In case this attribute isn't passed via DT, USB DRD controllers + should default to OTG. + $ref: /schemas/types.yaml#/definitions/string + enum: [host, peripheral, otg] + + hnp-disable: + description: + Tells OTG controllers we want to disable OTG HNP. Normally HNP is the + basic function of real OTG except you want it to be a srp-capable only B + device. + type: boolean + + srp-disable: + description: + Tells OTG controllers we want to disable OTG SRP. SRP is optional for OTG + device. + type: boolean + + adp-disable: + description: + Tells OTG controllers we want to disable OTG ADP. ADP is optional for OTG + device. + type: boolean + + usb-role-switch: + description: + Indicates that the device is capable of assigning the USB data role + (USB host or USB device) for a given USB connector, such as Type-C, + Type-B(micro). See connector/usb-connector.yaml. + + role-switch-default-mode: + description: + Indicates if usb-role-switch is enabled, the device default operation + mode of controller while usb role is USB_ROLE_NONE. + $ref: /schemas/types.yaml#/definitions/string + enum: [host, peripheral] + default: peripheral + +additionalProperties: true + +examples: + - | + usb@4a030000 { + compatible = "snps,dwc3"; + reg = <0x4a030000 0xcfff>; + interrupts = <0 92 4>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + maximum-speed = "super-speed"; + dr_mode = "otg"; + phy_type = "utmi_wide"; + otg-rev = <0x0200>; + adp-disable; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index b545b087b342..56853c17af66 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -9,18 +9,31 @@ title: Generic USB Host Controller Device Tree Bindings maintainers: - Greg Kroah-Hartman <gregkh@linuxfoundation.org> +allOf: + - $ref: usb.yaml# + properties: - $nodename: - pattern: "^usb(@.*)?" + companion: + description: Phandle of a companion device + $ref: /schemas/types.yaml#/definitions/phandle - phys: - $ref: /schemas/types.yaml#/definitions/phandle-array + tpl-support: description: - List of all the USB PHYs on this HCD + Indicates if the Targeted Peripheral List is supported for given + targeted hosts (non-PC hosts). + type: boolean - phy-names: - description: - Name specifier for the USB PHY + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^.*@[0-9a-f]{1,2}$": + description: The hard wired USB devices + type: object + $ref: /usb/usb-device.yaml additionalProperties: true @@ -29,4 +42,11 @@ examples: usb { phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb"; + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + }; }; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt deleted file mode 100644 index 0c5cff84a969..000000000000 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ /dev/null @@ -1,41 +0,0 @@ -USB xHCI controllers - -Required properties: - - compatible: should be one or more of - - - "generic-xhci" for generic XHCI device - - "marvell,armada3700-xhci" for Armada 37xx SoCs - - "marvell,armada-375-xhci" for Armada 375 SoCs - - "marvell,armada-380-xhci" for Armada 38x SoCs - - "brcm,bcm7445-xhci" for Broadcom STB SoCs with XHCI - - "xhci-platform" (deprecated) - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - - - reg: should contain address and length of the standard XHCI - register set for the device. - - interrupts: one XHCI interrupt should be described here. - -Optional properties: - - clocks: reference to the clocks - - clock-names: mandatory if there is a second clock, in this case - the name must be "core" for the first clock and "reg" for the - second one - - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - - usb3-lpm-capable: determines if platform is USB3 LPM capable - - quirk-broken-port-ped: set if the controller has broken port disable mechanism - - imod-interval-ns: default interrupt moderation interval is 5000ns - - phys : see usb-hcd.yaml in the current directory - -additionally the properties from usb-hcd.yaml (in the current directory) are -supported. - - -Example: - usb@f0931000 { - compatible = "generic-xhci"; - reg = <0xf0931000 0x8c8>; - interrupts = <0x0 0x4e 0x0>; - }; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.yaml b/Documentation/devicetree/bindings/usb/usb-xhci.yaml new file mode 100644 index 000000000000..965f87fef702 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-xhci.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-xhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic USB xHCI Controller Device Tree Bindings + +maintainers: + - Mathias Nyman <mathias.nyman@intel.com> + +allOf: + - $ref: "usb-hcd.yaml#" + +properties: + usb2-lpm-disable: + description: Indicates if we don't want to enable USB2 HW LPM + type: boolean + + usb3-lpm-capable: + description: Determines if platform is USB3 LPM capable + type: boolean + + quirk-broken-port-ped: + description: Set if the controller has broken port disable mechanism + type: boolean + + imod-interval-ns: + description: Interrupt moderation interval + default: 5000 + +additionalProperties: true + +examples: + - | + usb@f0930000 { + compatible = "generic-xhci"; + reg = <0xf0930000 0x8c8>; + interrupts = <0x0 0x4e 0x0>; + usb2-lpm-disable; + usb3-lpm-capable; + }; diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml new file mode 100644 index 000000000000..78491e66ed24 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic USB Controller Device Tree Bindings + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +select: false + +properties: + $nodename: + pattern: "^usb(@.*)?" + + phys: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of all the USB PHYs on this HCD + + phy-names: + description: + Name specifier for the USB PHY + + usb-phy: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of all the USB PHYs on this HCD to be accepted by the legacy USB + Physical Layer subsystem. + deprecated: true + + phy_type: + description: + Tells USB controllers that we want to configure the core to support a + UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected, UTMI+ low + pin interface if ULPI is specified, Serial core/PHY interconnect if + serial is specified and High-Speed Inter-Chip feature if HSIC is + selected. In case this isn't passed via DT, USB controllers should + default to HW capability. + $ref: /schemas/types.yaml#/definitions/string + enum: [utmi, utmi_wide, ulpi, serial, hsic] + + maximum-speed: + description: + Tells USB controllers we want to work up to a certain speed. In case this + isn't passed via DT, USB controllers should default to their maximum HW + capability. + $ref: /schemas/types.yaml#/definitions/string + enum: + - low-speed + - full-speed + - high-speed + - super-speed + - super-speed-plus + - super-speed-plus-gen2x1 + - super-speed-plus-gen1x2 + - super-speed-plus-gen2x2 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt index b353b9816487..b796836d2ce7 100644 --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -1,7 +1,7 @@ * Freescale i.MX non-core registers Required properties: -- #index-cells: Cells used to descibe usb controller index. Should be <1> +- #index-cells: Cells used to describe usb controller index. Should be <1> - compatible: Should be one of below: "fsl,imx6q-usbmisc" for imx6q "fsl,vf610-usbmisc" for Vybrid vf610 diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst index 2eeb3e9299e4..2085e7b24eeb 100644 --- a/Documentation/usb/gadget-testing.rst +++ b/Documentation/usb/gadget-testing.rst @@ -91,9 +91,9 @@ The ECM function provides these attributes in its function directory: and after creating the functions/ecm.<instance name> they contain default values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. +The ifname can be written to if the function is not bound. A write must be an +interface pattern such as "usb%d", which will cause the net core to choose the +next free usbX interface. By default, it is set to "usb%d". Testing the ECM function ------------------------ @@ -131,9 +131,9 @@ The ECM subset function provides these attributes in its function directory: and after creating the functions/ecm.<instance name> they contain default values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. +The ifname can be written to if the function is not bound. A write must be an +interface pattern such as "usb%d", which will cause the net core to choose the +next free usbX interface. By default, it is set to "usb%d". Testing the ECM subset function ------------------------------- @@ -171,9 +171,9 @@ The EEM function provides these attributes in its function directory: and after creating the functions/eem.<instance name> they contain default values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. +The ifname can be written to if the function is not bound. A write must be an +interface pattern such as "usb%d", which will cause the net core to choose the +next free usbX interface. By default, it is set to "usb%d". Testing the EEM function ------------------------ @@ -453,9 +453,9 @@ The NCM function provides these attributes in its function directory: and after creating the functions/ncm.<instance name> they contain default values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. +The ifname can be written to if the function is not bound. A write must be an +interface pattern such as "usb%d", which will cause the net core to choose the +next free usbX interface. By default, it is set to "usb%d". Testing the NCM function ------------------------ @@ -591,9 +591,9 @@ The RNDIS function provides these attributes in its function directory: and after creating the functions/rndis.<instance name> they contain default values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. +The ifname can be written to if the function is not bound. A write must be an +interface pattern such as "usb%d", which will cause the net core to choose the +next free usbX interface. By default, it is set to "usb%d". Testing the RNDIS function -------------------------- diff --git a/Documentation/usb/raw-gadget.rst b/Documentation/usb/raw-gadget.rst index 68d879a8009e..818a1648b387 100644 --- a/Documentation/usb/raw-gadget.rst +++ b/Documentation/usb/raw-gadget.rst @@ -2,83 +2,93 @@ USB Raw Gadget ============== -USB Raw Gadget is a kernel module that provides a userspace interface for -the USB Gadget subsystem. Essentially it allows to emulate USB devices -from userspace. Enabled with CONFIG_USB_RAW_GADGET. Raw Gadget is -currently a strictly debugging feature and shouldn't be used in -production, use GadgetFS instead. +USB Raw Gadget is a gadget driver that gives userspace low-level control over +the gadget's communication process. + +Like any other gadget driver, Raw Gadget implements USB devices via the +USB gadget API. Unlike most gadget drivers, Raw Gadget does not implement +any concrete USB functions itself but requires userspace to do that. + +Raw Gadget is currently a strictly debugging feature and should not be used +in production. Use GadgetFS instead. + +Enabled with CONFIG_USB_RAW_GADGET. Comparison to GadgetFS ~~~~~~~~~~~~~~~~~~~~~~ -Raw Gadget is similar to GadgetFS, but provides a more low-level and -direct access to the USB Gadget layer for the userspace. The key -differences are: +Raw Gadget is similar to GadgetFS but provides more direct access to the +USB gadget layer for userspace. The key differences are: -1. Every USB request is passed to the userspace to get a response, while +1. Raw Gadget passes every USB request to userspace to get a response, while GadgetFS responds to some USB requests internally based on the provided - descriptors. However note, that the UDC driver might respond to some - requests on its own and never forward them to the Gadget layer. + descriptors. Note that the UDC driver might respond to some requests on + its own and never forward them to the gadget layer. -2. GadgetFS performs some sanity checks on the provided USB descriptors, - while Raw Gadget allows you to provide arbitrary data as responses to - USB requests. +2. Raw Gadget allows providing arbitrary data as responses to USB requests, + while GadgetFS performs sanity checks on the provided USB descriptors. + This makes Raw Gadget suitable for fuzzing by providing malformed data as + responses to USB requests. 3. Raw Gadget provides a way to select a UDC device/driver to bind to, - while GadgetFS currently binds to the first available UDC. + while GadgetFS currently binds to the first available UDC. This allows + having multiple Raw Gadget instances bound to different UDCs. 4. Raw Gadget explicitly exposes information about endpoints addresses and - capabilities allowing a user to write UDC-agnostic gadgets. + capabilities. This allows the user to write UDC-agnostic gadgets. -5. Raw Gadget has ioctl-based interface instead of a filesystem-based one. +5. Raw Gadget has an ioctl-based interface instead of a filesystem-based + one. Userspace interface ~~~~~~~~~~~~~~~~~~~ -To create a Raw Gadget instance open /dev/raw-gadget. Multiple raw-gadget -instances (bound to different UDCs) can be used at the same time. The -interaction with the opened file happens through the ioctl() calls, see -comments in include/uapi/linux/usb/raw_gadget.h for details. +The user can interact with Raw Gadget by opening ``/dev/raw-gadget`` and +issuing ioctl calls; see the comments in include/uapi/linux/usb/raw_gadget.h +for details. Multiple Raw Gadget instances (bound to different UDCs) can be +used at the same time. -The typical usage of Raw Gadget looks like: +A typical usage scenario of Raw Gadget: -1. Open Raw Gadget instance via /dev/raw-gadget. -2. Initialize the instance via USB_RAW_IOCTL_INIT. -3. Launch the instance with USB_RAW_IOCTL_RUN. -4. In a loop issue USB_RAW_IOCTL_EVENT_FETCH calls to receive events from - Raw Gadget and react to those depending on what kind of USB device - needs to be emulated. +1. Create a Raw Gadget instance by opening ``/dev/raw-gadget``. +2. Initialize the instance via ``USB_RAW_IOCTL_INIT``. +3. Launch the instance with ``USB_RAW_IOCTL_RUN``. +4. In a loop issue ``USB_RAW_IOCTL_EVENT_FETCH`` to receive events from + Raw Gadget and react to those depending on what kind of USB gadget must + be implemented. -Note, that some UDC drivers have fixed addresses assigned to endpoints, and -therefore arbitrary endpoint addresses can't be used in the descriptors. -Nevertheles, Raw Gadget provides a UDC-agnostic way to write USB gadgets. -Once a USB_RAW_EVENT_CONNECT event is received via USB_RAW_IOCTL_EVENT_FETCH, -the USB_RAW_IOCTL_EPS_INFO ioctl can be used to find out information about -endpoints that the UDC driver has. Based on that information, the user must -chose UDC endpoints that will be used for the gadget being emulated, and -properly assign addresses in endpoint descriptors. +Note that some UDC drivers have fixed addresses assigned to endpoints, and +therefore arbitrary endpoint addresses cannot be used in the descriptors. +Nevertheless, Raw Gadget provides a UDC-agnostic way to write USB gadgets. +Once ``USB_RAW_EVENT_CONNECT`` is received via ``USB_RAW_IOCTL_EVENT_FETCH``, +``USB_RAW_IOCTL_EPS_INFO`` can be used to find out information about the +endpoints that the UDC driver has. Based on that, userspace must choose UDC +endpoints for the gadget and assign addresses in the endpoint descriptors +correspondingly. -You can find usage examples (along with a test suite) here: +Raw Gadget usage examples and a test suite: https://github.com/xairy/raw-gadget Internal details ~~~~~~~~~~~~~~~~ -Currently every endpoint read/write ioctl submits a USB request and waits until -its completion. This is the desired mode for coverage-guided fuzzing (as we'd -like all USB request processing happen during the lifetime of a syscall), -and must be kept in the implementation. (This might be slow for real world -applications, thus the O_NONBLOCK improvement suggestion below.) +Every Raw Gadget endpoint read/write ioctl submits a USB request and waits +until its completion. This is done deliberately to assist with coverage-guided +fuzzing by having a single syscall fully process a single USB request. This +feature must be kept in the implementation. Potential future improvements ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- Report more events (suspend, resume, etc.) through USB_RAW_IOCTL_EVENT_FETCH. +- Report more events (suspend, resume, etc.) through + ``USB_RAW_IOCTL_EVENT_FETCH``. -- Support O_NONBLOCK I/O. +- Support ``O_NONBLOCK`` I/O. This would be another mode of operation, where + Raw Gadget would not wait until the completion of each USB request. - Support USB 3 features (accept SS endpoint companion descriptor when - enabling endpoints; allow providing stream_id for bulk transfers). + enabling endpoints; allow providing ``stream_id`` for bulk transfers). -- Support ISO transfer features (expose frame_number for completed requests). +- Support ISO transfer features (expose ``frame_number`` for completed + requests). |