Merge tag 'bd71847-support' into regulator-4.20

regulator/mfd: Support for the ROHM BD71847

This adds support for the BD71847 which touches both MFD and regulator.
There's a few other bits and pieces included as some dependency patches
had already been applied so would've required rebasing.

2 files changed, 18 insertions, 11 deletions

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
index 3ca56fdb5ffe..a4b056761eaa 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
@@ -1,16 +1,17 @@
-* ROHM BD71837 Power Management Integrated Circuit bindings
+* ROHM BD71837 and BD71847 Power Management Integrated Circuit bindings
 
-BD71837MWV is a programmable Power Management IC for powering single-core,
-dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is optimized for
-low BOM cost and compact solution footprint. It integrates 8 Buck
-egulators and 7 LDOs to provide all the power rails required by the SoC and
-the commonly used peripherals.
+BD71837MWV and BD71847MWV are programmable Power Management ICs for powering
+single-core, dual-core, and quad-core SoCs such as NXP-i.MX 8M. They are
+optimized for low BOM cost and compact solution footprint. BD71837MWV
+integrates 8 Buck regulators and 7 LDOs. BD71847MWV contains 6 Buck regulators
+and 6 LDOs.
 
-Datasheet for PMIC is available at:
+Datasheet for BD71837 is available at:
 https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
 
 Required properties:
- - compatible		: Should be "rohm,bd71837".
+ - compatible		: Should be "rohm,bd71837" for bd71837
+				    "rohm,bd71847" for bd71847.
  - reg			: I2C slave address.
  - interrupt-parent	: Phandle to the parent interrupt controller.
  - interrupts		: The interrupt line the device is connected to.
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
index 76ead07072b1..4b98ca26e61a 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
@@ -1,7 +1,9 @@
-ROHM BD71837 Power Management Integrated Circuit (PMIC) regulator bindings
+ROHM BD71837 and BD71847 Power Management Integrated Circuit regulator bindings
 
 Required properties:
- - regulator-name: should be "buck1", ..., "buck8" and "ldo1", ..., "ldo7"
+ - regulator-name: should be "buck1", ..., "buck8" and "ldo1", ..., "ldo7" for
+                   BD71837. For BD71847 names should be "buck1", ..., "buck6"
+		   and "ldo1", ..., "ldo6"
 
 List of regulators provided by this controller. BD71837 regulators node
 should be sub node of the BD71837 MFD node. See BD71837 MFD bindings at
@@ -16,10 +18,14 @@ disabled by driver at startup. LDO5 and LDO6 are supplied by those and
 if they are disabled at startup the voltage monitoring for LDO5/LDO6 will
 cause PMIC to reset.
 
-The valid names for regulator nodes are:
+The valid names for BD71837 regulator nodes are:
 BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8
 LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
 
+The valid names for BD71847 regulator nodes are:
+BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
+LDO1, LDO2, LDO3, LDO4, LDO5, LDO6
+
 Optional properties:
 - Any optional property defined in bindings/regulator/regulator.txt