summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-02-20 09:52:08 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-02-20 09:52:08 -0800
commit507b500726fa501b9411493d969a99236f2b10e1 (patch)
tree623b83c5b360b97a162ae4a850022e75e038f565 /Documentation
parentce1bf97965abb7faaa98b6bd89201855159471c8 (diff)
parent2f1736ff0664937636f8c0a4994c4a5a23da2090 (diff)
downloadlinux-507b500726fa501b9411493d969a99236f2b10e1.tar.bz2
Merge tag 'hwmon-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck: - new driver for stts751 - it87: Added support for IT8622E and IT8792E; improved support for other chips - lm70: Added support for TMP122/124 - use permission-specific DEVICE_ATTR variants where possible - fixed overflows in various drivers - minor improvements in various drivers * tag 'hwmon-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (95 commits) hwmon: (sht15) Add device tree support devicetree: add lm90 thermal_zone sensor support hwmon: (it87) Add support for IT8792E hwmon: (it87) Do not overwrite bit 2..6 of pwm control registers hwmon: (it87) Fix pwm4 detection for IT8620 and IT8628 hwmon: (it87) Ensure that pwm control cache is current before updating values hwmon: (it87) Improve IT8622 support hwmon: (it87) Add support for IT8622E hwmon: (it87) Add feature flag indicating that VIN3 is connected to 5V DT: add binding documentation for STTS751 hwmon: new driver for ST stts751 thermal sensor hwmon: Register thermal zone only if 'dev' parameter was provided hwmon: Relax name attribute validation for new APIs hwmon: Update documentation to clarify rules for the 'name' attribute hwmon: Make name attribute mandatory for new APIs hwmon: (lm70) Add support for TI TMP122/124 hwmon: (lm70) Utilize dev_warn instead of pr_warn hwmon: (ltc4151) Export OF device ID table as module aliases hwmon: (adc128d818) Preserve operation mode hwmon: (adc128d818) Support operation modes 1-3 ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/hwmon/adc128d818.txt38
-rw-r--r--Documentation/devicetree/bindings/hwmon/lm70.txt1
-rw-r--r--Documentation/devicetree/bindings/hwmon/lm90.txt6
-rw-r--r--Documentation/devicetree/bindings/hwmon/sht15.txt19
-rw-r--r--Documentation/devicetree/bindings/hwmon/stts751.txt15
-rw-r--r--Documentation/hwmon/hwmon-kernel-api.txt4
-rw-r--r--Documentation/hwmon/lm708
-rw-r--r--Documentation/hwmon/sht215
-rw-r--r--Documentation/hwmon/sysfs-interface5
9 files changed, 95 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt
new file mode 100644
index 000000000000..08bab0e94d25
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adc128d818.txt
@@ -0,0 +1,38 @@
+TI ADC128D818 ADC System Monitor With Temperature Sensor
+--------------------------------------------------------
+
+Operation modes:
+
+ - Mode 0: 7 single-ended voltage readings (IN0-IN6),
+ 1 temperature reading (internal)
+ - Mode 1: 8 single-ended voltage readings (IN0-IN7),
+ no temperature
+ - Mode 2: 4 pseudo-differential voltage readings
+ (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6),
+ 1 temperature reading (internal)
+ - Mode 3: 4 single-ended voltage readings (IN0-IN3),
+ 2 pseudo-differential voltage readings
+ (IN4-IN5, IN7-IN6),
+ 1 temperature reading (internal)
+
+If no operation mode is configured via device tree, the driver keeps the
+currently active chip operation mode (default is mode 0).
+
+
+Required node properties:
+
+ - compatible: must be set to "ti,adc128d818"
+ - reg: I2C address of the device
+
+Optional node properties:
+
+ - ti,mode: Operation mode (see above).
+
+
+Example (operation mode 2):
+
+ adc128d818@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ ti,mode = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/lm70.txt b/Documentation/devicetree/bindings/hwmon/lm70.txt
index e7fd921aa4f1..ea417a0d32af 100644
--- a/Documentation/devicetree/bindings/hwmon/lm70.txt
+++ b/Documentation/devicetree/bindings/hwmon/lm70.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: one of
"ti,lm70"
"ti,tmp121"
+ "ti,tmp122"
"ti,lm71"
"ti,lm74"
diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt
index e8632486b9ef..97581266e329 100644
--- a/Documentation/devicetree/bindings/hwmon/lm90.txt
+++ b/Documentation/devicetree/bindings/hwmon/lm90.txt
@@ -33,6 +33,11 @@ Optional properties:
LM90 "-ALERT" pin output.
See interrupt-controller/interrupts.txt for the format.
+- #thermal-sensor-cells: should be set to 1. See thermal/thermal.txt for
+ details. See <include/dt-bindings/thermal/lm90.h> for the
+ definition of the local, remote and 2nd remote sensor index
+ constants.
+
Example LM90 node:
temp-sensor {
@@ -41,4 +46,5 @@ temp-sensor {
vcc-supply = <&palmas_ldo6_reg>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
}
diff --git a/Documentation/devicetree/bindings/hwmon/sht15.txt b/Documentation/devicetree/bindings/hwmon/sht15.txt
new file mode 100644
index 000000000000..6a80277cc426
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sht15.txt
@@ -0,0 +1,19 @@
+Sensirion SHT15 Humidity and Temperature Sensor
+
+Required properties:
+
+ - "compatible": must be "sensirion,sht15".
+ - "data-gpios": GPIO connected to the data line.
+ - "clk-gpios": GPIO connected to the clock line.
+ - "vcc-supply": regulator that drives the VCC pin.
+
+Example:
+
+ sensor {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sensor>;
+ compatible = "sensirion,sht15";
+ clk-gpios = <&gpio4 12 0>;
+ data-gpios = <&gpio4 13 0>;
+ vcc-supply = <&reg_sht15>;
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/stts751.txt b/Documentation/devicetree/bindings/hwmon/stts751.txt
new file mode 100644
index 000000000000..3ee1dc30e72f
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/stts751.txt
@@ -0,0 +1,15 @@
+* STTS751 thermometer.
+
+Required node properties:
+- compatible: "stts751"
+- reg: I2C bus address of the device
+
+Optional properties:
+- smbus-timeout-disable: when set, the smbus timeout function will be disabled
+
+Example stts751 node:
+
+temp-sensor {
+ compatible = "stts751";
+ reg = <0x48>;
+}
diff --git a/Documentation/hwmon/hwmon-kernel-api.txt b/Documentation/hwmon/hwmon-kernel-api.txt
index 2505ae67e2b6..53a806696c64 100644
--- a/Documentation/hwmon/hwmon-kernel-api.txt
+++ b/Documentation/hwmon/hwmon-kernel-api.txt
@@ -89,6 +89,10 @@ the call to devm_hwmon_device_register_with_groups or
hwmon_device_register_with_info and if the automatic (device managed)
removal would be too late.
+All supported hwmon device registration functions only accept valid device
+names. Device names including invalid characters (whitespace, '*', or '-')
+will be rejected. The 'name' parameter is mandatory.
+
Using devm_hwmon_device_register_with_info()
--------------------------------------------
diff --git a/Documentation/hwmon/lm70 b/Documentation/hwmon/lm70
index 1bb2db440671..c3a1f2ea017d 100644
--- a/Documentation/hwmon/lm70
+++ b/Documentation/hwmon/lm70
@@ -6,6 +6,8 @@ Supported chips:
Datasheet: http://www.national.com/pf/LM/LM70.html
* Texas Instruments TMP121/TMP123
Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html
+ * Texas Instruments TMP122/TMP124
+ Information: http://www.ti.com/product/tmp122
* National Semiconductor LM71
Datasheet: http://www.ti.com/product/LM71
* National Semiconductor LM74
@@ -35,8 +37,10 @@ As a real (in-tree) example of this "SPI protocol driver" interfacing
with a "SPI master controller driver", see drivers/spi/spi_lm70llp.c
and its associated documentation.
-The LM74 and TMP121/TMP123 are very similar; main difference is 13-bit
-temperature data (0.0625 degrees celsius resolution).
+The LM74 and TMP121/TMP122/TMP123/TMP124 are very similar; main difference is
+13-bit temperature data (0.0625 degrees celsius resolution).
+
+The TMP122/TMP124 also feature configurable temperature thresholds.
The LM71 is also very similar; main difference is 14-bit temperature
data (0.03125 degrees celsius resolution).
diff --git a/Documentation/hwmon/sht21 b/Documentation/hwmon/sht21
index db17fda45c3e..47f4765db256 100644
--- a/Documentation/hwmon/sht21
+++ b/Documentation/hwmon/sht21
@@ -35,6 +35,7 @@ sysfs-Interface
temp1_input - temperature input
humidity1_input - humidity input
+eic - Electronic Identification Code
Notes
-----
@@ -45,5 +46,5 @@ humidity and 66 ms for temperature. To keep self heating below 0.1 degree
Celsius, the device should not be active for more than 10% of the time,
e.g. maximum two measurements per second at the given resolution.
-Different resolutions, the on-chip heater, using the CRC checksum and reading
-the serial number are not supported yet.
+Different resolutions, the on-chip heater, and using the CRC checksum
+are not supported yet.
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 2cc95ad46604..fc337c317c67 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -86,8 +86,9 @@ given driver if the chip has the feature.
name The chip name.
This should be a short, lowercase string, not containing
- spaces nor dashes, representing the chip name. This is
- the only mandatory attribute.
+ whitespace, dashes, or the wildcard character '*'.
+ This attribute represents the chip name. It is the only
+ mandatory attribute.
I2C devices get this attribute created automatically.
RO