summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-11-14 17:52:21 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-11-14 17:52:21 -0800
commit4008e6a9bcee2f3b61bb11951de0fb0ed764cb91 (patch)
treee7e3202d6d156acb57845a1824c9a8249f288c53 /Documentation
parent6aa2f9441f1ef21f10c41f45e6453b135e9cd736 (diff)
parentd82e99a6f9b38cb1a044b4cd979bd49fd3f67cd2 (diff)
downloadlinux-4008e6a9bcee2f3b61bb11951de0fb0ed764cb91.tar.bz2
Merge branch 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "This contains two bigger than usual tree-wide changes this time. They all have proper acks, caused no merge conflicts in linux-next where they have been for a while. They are namely: - to-gpiod conversion of the i2c-gpio driver and its users (touching arch/* and drivers/mfd/*) - adding a sbs-manager based on I2C core updates to SMBus alerts (touching drivers/power/*) Other notable changes: - i2c_boardinfo can now carry a dev_name to be used when the device is created. This is because some devices in ACPI world need fixed names to find the regulators. - the designware driver got a long discussed overhaul of its PM handling. img-scb and davinci got PM support, too. - at24 driver has way better OF support. And it has a new maintainer. Thanks Bartosz for stepping up! The rest is regular driver updates and fixes" * 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits) ARM: sa1100: simpad: Correct I2C GPIO offsets i2c: aspeed: Deassert reset in probe eeprom: at24: Add OF device ID table MAINTAINERS: new maintainer for AT24 driver i2c: nuc900: remove platform_data, too i2c: thunderx: Remove duplicate NULL check i2c: taos-evm: Remove duplicate NULL check i2c: Make i2c_unregister_device() NULL-aware i2c: xgene-slimpro: Support v2 i2c: mpc: remove useless variable initialization i2c: omap: Trigger bus recovery in lockup case i2c: gpio: Add support for named gpios in DT dt-bindings: i2c: i2c-gpio: Add support for named gpios i2c: gpio: Local vars in probe i2c: gpio: Augment all boardfiles to use open drain i2c: gpio: Enforce open drain through gpiolib gpio: Make it possible for consumers to enforce open drain i2c: gpio: Convert to use descriptors power: supply: sbs-message: fix some code style issues power: supply: sbs-battery: remove unchecked return var ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/eeprom/eeprom.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-aspeed.txt7
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-davinci.txt12
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-gpio.txt32
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux.txt4
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-rcar.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c.txt4
-rw-r--r--Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt66
8 files changed, 113 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt
index afc04589eadf..27f2bc15298a 100644
--- a/Documentation/devicetree/bindings/eeprom/eeprom.txt
+++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt
@@ -36,6 +36,8 @@ Optional properties:
- read-only: this parameterless property disables writes to the eeprom
+ - size: total eeprom size in bytes
+
Example:
eeprom@52 {
diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
index bd6480b19535..e7106bfc1f13 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
@@ -7,7 +7,9 @@ Required Properties:
- compatible : should be "aspeed,ast2400-i2c-bus"
or "aspeed,ast2500-i2c-bus"
- clocks : root clock of bus, should reference the APB
- clock
+ clock in the second cell
+- resets : phandle to reset controller with the reset number in
+ the second cell
- interrupts : interrupt number
- interrupt-parent : interrupt controller for bus, should reference a
aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic
@@ -40,7 +42,8 @@ i2c {
#interrupt-cells = <1>;
reg = <0x40 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
index 5b123e0e4cc2..64e6e656c345 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
@@ -6,6 +6,18 @@ davinci/keystone i2c interface contains.
Required properties:
- compatible: "ti,davinci-i2c" or "ti,keystone-i2c";
- reg : Offset and length of the register set for the device
+- clocks: I2C functional clock phandle.
+ For 66AK2G this property should be set per binding,
+ Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+
+SoC-specific Required Properties:
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+
+- power-domains: Should contain a phandle to a PM domain provider node
+ and an args specifier containing the I2C device id
+ value. This property is as per the binding,
+ Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
Recommended properties :
- interrupts : standard interrupt property.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
index 4f8ec947c6bd..38a05562d1d2 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
@@ -2,25 +2,39 @@ Device-Tree bindings for i2c gpio driver
Required properties:
- compatible = "i2c-gpio";
- - gpios: sda and scl gpio
-
+ - sda-gpios: gpio used for the sda signal, this should be flagged as
+ active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+ from <dt-bindings/gpio/gpio.h> since the signal is by definition
+ open drain.
+ - scl-gpios: gpio used for the scl signal, this should be flagged as
+ active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+ from <dt-bindings/gpio/gpio.h> since the signal is by definition
+ open drain.
Optional properties:
- - i2c-gpio,sda-open-drain: sda as open drain
- - i2c-gpio,scl-open-drain: scl as open drain
- i2c-gpio,scl-output-only: scl as output only
- i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform)
- i2c-gpio,timeout-ms: timeout to get data
+Deprecated properties, do not use in new device tree sources:
+ - gpios: sda and scl gpio, alternative for {sda,scl}-gpios
+ - i2c-gpio,sda-open-drain: this means that something outside of our
+ control has put the GPIO line used for SDA into open drain mode, and
+ that something is not the GPIO chip. It is essentially an
+ inconsistency flag.
+ - i2c-gpio,scl-open-drain: this means that something outside of our
+ control has put the GPIO line used for SCL into open drain mode, and
+ that something is not the GPIO chip. It is essentially an
+ inconsistency flag.
+
Example nodes:
+#include <dt-bindings/gpio/gpio.h>
+
i2c@0 {
compatible = "i2c-gpio";
- gpios = <&pioA 23 0 /* sda */
- &pioA 24 0 /* scl */
- >;
- i2c-gpio,sda-open-drain;
- i2c-gpio,scl-open-drain;
+ sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt
index 212e6779dc5c..b38f58a1c878 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux.txt
@@ -6,10 +6,10 @@ multiplexer/switch will have one child node for each child bus.
Optional properties:
- #address-cells = <1>;
- This property is required is the i2c-mux child node does not exist.
+ This property is required if the i2c-mux child node does not exist.
- #size-cells = <0>;
- This property is required is the i2c-mux child node does not exist.
+ This property is required if the i2c-mux child node does not exist.
- i2c-mux
For i2c multiplexers/switches that have child nodes that are a mixture
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index cad39aee9f73..a777477e4547 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -13,6 +13,7 @@ Required properties:
"renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC.
"renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC.
"renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC.
+ "renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC.
"renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
device.
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index cee9d5055fa2..11263982470e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -59,8 +59,8 @@ wants to support one of the below features, it should adapt the bindings below.
interrupts used by the device.
- interrupt-names
- "irq" and "wakeup" names are recognized by I2C core, other names are
- left to individual drivers.
+ "irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
+ other names are left to individual drivers.
- host-notify
device uses SMBus host notify protocol instead of interrupt line.
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
new file mode 100644
index 000000000000..4b2195571a49
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
@@ -0,0 +1,66 @@
+Binding for sbs-manager
+
+Required properties:
+- compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part
+ number compatible string might be used in order to take care of vendor
+ specific registers.
+- reg: integer, i2c address of the device. Should be <0xa>.
+Optional properties:
+- gpio-controller: Marks the port as GPIO controller.
+ See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
+- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell
+ is used to specify optional parameters:
+ See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
+
+From OS view the device is basically an i2c-mux used to communicate with up to
+four smart battery devices at address 0xb. The driver actually implements this
+behaviour. So standard i2c-mux nodes can be used to register up to four slave
+batteries. Channels will be numerated starting from 1 to 4.
+
+Example:
+
+batman@a {
+ compatible = "lltc,ltc1760", "sbs,sbs-manager";
+ reg = <0x0a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ battery@b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 1 1>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ battery@b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 2 1>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ battery@b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 3 1>;
+ };
+ };
+};