Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, there are many patches addressing minor issues in existing
  DTS files, such as DTC warnings, or adding support for additional
  peripherals.

  There are three added SoCs in existing product families:

   - Amazon:

     Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
     otherwise known as AL73400 or first-generation Graviton, and
     following the already supported Cortex-A1`5 and Cortex-A57 based
     Alpine chips. This one is added together with the official
     Evaluation platform.

   - Qualcomm:

     The Snapdragon SDM630 platform is a family of mid-range mobile
     phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
     of five end-user products are added based on these, all Android
     phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.

   - Renesas:

     RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
     family, and apparently closely related to the RZ/G2N and RZ/G2M
     models we already support but has a faster GPU and additional
     on-chip peripherals. It is added along with the HopeRun HiHope
     RZ/G2H development board

  A small number of new boards for already supported SoCs also debut:

   - Allwinner sunxi:

     Only one new machine, revision v1.2 of the Pine64 PinePhone
     (non-Android) smartphone, containing minor changes compared to
     earlier versions.

   - Amlogic Meson:

     WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box

   - Aspeed:

     EthanolX is AMD's EPYC data center rerence platform, using an
     ASpeed AST2600 baseboard management controller.

   - Mediatek:

     Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
     on the MT8183 (Helio P60t) SoC.

   - Nvidia Tegra:

     ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
     tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
     Thanks to PostmarketOS, these can now run mainline kernels and
     become useful again.

     The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
     the Tegra194, their latest 64-bit chip based on Carmel CPU cores
     and Volta graphics.

   - NXP i.MX:

     Five new boards based on the 32-bit i.MX6 series are added: The
     MYiR MYS-6ULX single-board computer, and four different models of
     industrial computers from Protonic.

   - Qualcomm:

     MikroTik RouterBoard 3011 is a rackmounted router based on the
     32-bit IPQ8064 networking SoC

     Three older phones get added, the Snapdragon 808 (msm8992) based
     Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
     Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
     Z5.

   - Renesas:

     In addition to the HiHope RZ/G2H board mentioned above, we gain
     support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
     RZ/G2N reference boards. Beacon EmbeddedWorks adds another
     SoM+Carrier development board for RZ/G2M.

   - Rockchips:

     Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
     based on, using the high-end 32-bit rk3288 SoC.

  Notable updates to existing platforms are usually for added on-chip
  peripherals, including:

   - ASpeed AST2xxx (various)

   - Allwinner (cpufreq, thermal, Pinephone touchscreen)

   - Amlogic Meson (audio, gpu dvdfs, board updates)

   - Arm Versatile

   - Broadcom (board updates for switch ports, Raspberry pi clock updates)

   - Hisilicon (various)

   - Intel/Altera SoCFPGA (various)

   - Marvell Armada 7xxx/8xxx (smmu)

   - Marvell MMP (GPU on mmp2/mmp3)

   - Mediatek mt8183 (USB, pericfg)

   - NXP Layerscape (VPU, thermal, DSPI)

   - NXP i.MX (VPU, bindings, board updates)

   - Nvidia Tegra194 (GPU)

   - Qualcomm (GPU, Interconnect, ...)

   - Renesas R-Car (SPI, IPMMU, board updates)

   - STMicroelectronics STM32 (various)

   - Samsung Exynos (various)

   - Socionext Uniphier (updates to serial, and pcie)

   - TI K3 (serdes, usb3, audio, sd, chipid)

   - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"

* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
  arm64: dts: meson: odroid-n2: add jack audio output support
  arm64: dts: meson: odroid-n2: enable audio loopback
  ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
  arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
  arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
  arm64: dts: qcom: msm8992: Add RPMCC node
  arm64: dts: qcom: msm8992: Add PSCI support.
  arm64: dts: qcom: msm8992: Add PMU node
  arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
  arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
  arm64: dts: qcom: msm8992: Add a SCM node
  arm64: dts: qcom: msm8992: Add a proper CPU map
  arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
  arm64: dts: qcom: bullhead: Add qcom,msm-id
  arm64: dts: qcom: msm8992: Fix SDHCI1
  arm64: dts: qcom: msm8992: Modernize the DTS style
  arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
  arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
  arm64: dts: qcom: msm8994: Add support for SMD RPM
  arm64: dts: qcom: msm8992: Add a label to rpm-requests
  ...

20 files changed, 227 insertions, 33 deletions

diff --git a/Documentation/devicetree/bindings/arm/al,alpine.yaml b/Documentation/devicetree/bindings/arm/al,alpine.yaml
deleted file mode 100644
index a70dff277e05..000000000000
--- a/Documentation/devicetree/bindings/arm/al,alpine.yaml
+++ /dev/null
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/al,alpine.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Annapurna Labs Alpine Platform Device Tree Bindings
-
-maintainers:
-  - Tsahee Zidenberg <tsahee@annapurnalabs.com>
-  - Antoine Tenart <antoine.tenart@bootlin.com>
-
-properties:
-  compatible:
-    items:
-      - const: al,alpine
-  model:
-    items:
-      - const: "Annapurna Labs Alpine Dev Board"
-
-...
diff --git a/Documentation/devicetree/bindings/arm/amazon,al.yaml b/Documentation/devicetree/bindings/arm/amazon,al.yaml
new file mode 100644
index 000000000000..a3a4d710bd02
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amazon,al.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/amazon,al.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon's Annapurna Labs Alpine Platform Device Tree Bindings
+
+maintainers:
+  - Hanna Hawa <hhhawa@amazon.com>
+  - Talel Shenhar <talel@amazon.com>, <talelshenhar@gmail.com>
+  - Ronen Krupnik <ronenk@amazon.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: Boards with Alpine V1 SoC
+        items:
+          - const: al,alpine
+
+      - description: Boards with Alpine V2 SoC
+        items:
+          - enum:
+              - al,alpine-v2-evp
+          - const: al,alpine-v2
+
+      - description: Boards with Alpine V3 SoC
+        items:
+          - enum:
+              - amazon,al-alpine-v3-evp
+          - const: amazon,al-alpine-v3
+
+...
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 378229fa8310..5eba9f48823e 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -121,6 +121,7 @@ properties:
               - libretech,aml-s912-pc
               - nexbox,a1
               - tronsmart,vega-s96
+              - wetek,core2
           - const: amlogic,s912
           - const: amlogic,meson-gxm
 
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 05906e291e38..f63895c8ce2d 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -120,6 +120,8 @@ properties:
               - fsl,imx6q-sabrelite
               - fsl,imx6q-sabresd
               - kontron,imx6q-samx6i      # Kontron i.MX6 Dual/Quad SMARC Module
+              - prt,prti6q                # Protonic PRTI6Q board
+              - prt,prtwd2                # Protonic WD2 board
               - technexion,imx6q-pico-dwarf   # TechNexion i.MX6Q Pico-Dwarf
               - technexion,imx6q-pico-hobbit  # TechNexion i.MX6Q Pico-Hobbit
               - technexion,imx6q-pico-nymph   # TechNexion i.MX6Q Pico-Nymph
@@ -172,6 +174,8 @@ properties:
               - fsl,imx6dl-sabreauto      # i.MX6 DualLite/Solo SABRE Automotive Board
               - fsl,imx6dl-sabresd        # i.MX6 DualLite SABRE Smart Device Board
               - kontron,imx6dl-samx6i     # Kontron i.MX6 Solo SMARC Module
+              - prt,prtrvt                # Protonic RVT board
+              - prt,prtvt7                # Protonic VT7 board
               - technexion,imx6dl-pico-dwarf   # TechNexion i.MX6DL Pico-Dwarf
               - technexion,imx6dl-pico-hobbit  # TechNexion i.MX6DL Pico-Hobbit
               - technexion,imx6dl-pico-nymph   # TechNexion i.MX6DL Pico-Nymph
@@ -268,6 +272,7 @@ properties:
               - armadeus,imx6ull-opos6uldev # OPOS6UL (i.MX6ULL) SoM on OPOS6ULDev board
               - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
               - kontron,imx6ull-n6411-som # Kontron N6411 SOM
+              - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
               - toradex,colibri-imx6ull-eval            # Colibri iMX6ULL Module on Colibri Evaluation Board
               - toradex,colibri-imx6ull-wifi-eval       # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board
           - const: fsl,imx6ull
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index abc544dde692..30908963ae26 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -114,4 +114,9 @@ properties:
           - enum:
               - mediatek,mt8183-evb
           - const: mediatek,mt8183
+      - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
+        items:
+          - const: google,krane-sku176
+          - const: google,krane
+          - const: mediatek,mt8183
 ...
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index b7d2e921150a..0d4dabb4a164 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -118,6 +118,7 @@ properties:
         items:
           - enum:
               - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform
+              - beacon,beacon-rzg2m # Beacon EmbeddedWorks RZ/G2M Kit
           - const: renesas,r8a774a1
 
       - items:
@@ -150,6 +151,18 @@ properties:
           - const: si-linux,cat874
           - const: renesas,r8a774c0
 
+      - description: RZ/G2H (R8A774E1)
+        items:
+          - enum:
+              - hoperun,hihope-rzg2h # HopeRun HiHope RZ/G2H platform
+          - const: renesas,r8a774e1
+
+      - items:
+          - enum:
+              - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
+          - const: hoperun,hihope-rzg2h
+          - const: renesas,r8a774e1
+
       - description: R-Car M1A (R8A77781)
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index d4a4045092df..db2e35796795 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -435,6 +435,12 @@ properties:
           - const: radxa,rockpi4
           - const: rockchip,rk3399
 
+      - description: Radxa ROCK Pi N8
+        items:
+          - const: radxa,rockpi-n8
+          - const: vamrs,rk3288-vmarc-som
+          - const: rockchip,rk3288
+
       - description: Radxa ROCK Pi N10
         items:
           - const: radxa,rockpi-n10
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index cf5db5e273f3..6f1cd0103c74 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -16,6 +16,9 @@ properties:
       - items:
           - enum:
               - st,stm32mp157-syscfg
+              - st,stm32mp151-pwr-mcu
+              - st,stm32-syscfg
+              - st,stm32-power-config
           - const: syscon
 
   reg:
@@ -27,7 +30,16 @@ properties:
 required:
   - compatible
   - reg
-  - clocks
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32mp157-syscfg
+then:
+  required:
+    - clocks
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 87817ff0cd35..efc9118233b4 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -657,6 +657,11 @@ properties:
           - const: pine64,pinephone-1.1
           - const: allwinner,sun50i-a64
 
+      - description: Pine64 PinePhone (1.2)
+        items:
+          - const: pine64,pinephone-1.2
+          - const: allwinner,sun50i-a64
+
       - description: Pine64 PineTab
         items:
           - const: pine64,pinetab
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index 60b38eb5c61a..e0b3debaee9e 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -35,6 +35,9 @@ properties:
           - const: toradex,colibri_t20
           - const: nvidia,tegra20
       - items:
+          - const: acer,picasso
+          - const: nvidia,tegra20
+      - items:
           - enum:
               - nvidia,beaver
           - const: nvidia,tegra30
@@ -60,6 +63,13 @@ properties:
           - const: toradex,colibri_t30
           - const: nvidia,tegra30
       - items:
+          - const: asus,grouper
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tilapia
+          - const: asus,grouper
+          - const: nvidia,tegra30
+      - items:
           - enum:
               - nvidia,dalmore
               - nvidia,roth
@@ -101,3 +111,11 @@ properties:
           - enum:
               - nvidia,p2972-0000
           - const: nvidia,tegra194
+      - description: Jetson Xavier NX
+        items:
+          - const: nvidia,p3668-0000
+          - const: nvidia,tegra194
+      - description: Jetson Xavier NX Developer Kit
+        items:
+          - const: nvidia,p3509-0000+p3668-0000
+          - const: nvidia,tegra194
diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
index 41372d441131..2aaf661c04ee 100644
--- a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
+++ b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
@@ -4,8 +4,9 @@ Required properties:
 - compatible : For Tegra20, must contain "nvidia,tegra20-efuse".  For Tegra30,
   must contain "nvidia,tegra30-efuse".  For Tegra114, must contain
   "nvidia,tegra114-efuse".  For Tegra124, must contain "nvidia,tegra124-efuse".
-  Otherwise, must contain "nvidia,<chip>-efuse", plus one of the above, where
-  <chip> is tegra132.
+  For Tegra132 must contain "nvidia,tegra132-efuse", "nvidia,tegra124-efuse".
+  For Tegra210 must contain "nvidia,tegra210-efuse". For Tegra186 must contain
+  "nvidia,tegra186-efuse". For Tegra194 must contain "nvidia,tegra194-efuse".
   Details:
   nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
 	due to a hardware bug. Tegra20 also lacks certain information which is
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
index f32bbba4d3bc..662a3c8a7d29 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
@@ -6,6 +6,7 @@ Required properties:
   - nvidia,gk20a
   - nvidia,gm20b
   - nvidia,gp10b
+  - nvidia,gv11b
 - reg: Physical base address and length of the controller's registers.
   Must contain two entries:
   - first entry for bar0
@@ -25,6 +26,9 @@ Required properties:
 If the compatible string is "nvidia,gm20b", then the following clock
 is also required:
   - ref
+If the compatible string is "nvidia,gv11b", then the following clock is also
+required:
+  - fuse
 - resets: Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names: Must include the following entries:
@@ -88,3 +92,24 @@ Example for GP10B:
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
 		iommus = <&smmu TEGRA186_SID_GPU>;
 	};
+
+Example for GV11B:
+
+	gpu@17000000 {
+		compatible = "nvidia,gv11b";
+		reg = <0x17000000 0x10000000>,
+		      <0x18000000 0x10000000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&bpmp TEGRA194_CLK_GPCCLK>,
+			 <&bpmp TEGRA194_CLK_GPU_PWR>,
+			 <&bpmp TEGRA194_CLK_FUSE>;
+		clock-names = "gpu", "pwr", "fuse";
+		resets = <&bpmp TEGRA194_RESET_GPU>;
+		reset-names = "gpu";
+		dma-coherent;
+
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>;
+		iommus = <&smmu TEGRA194_SID_GPU>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
index 18c0de362451..3f2f990c2e62 100644
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
@@ -35,12 +35,12 @@ Required properties:
 	Due to above changes, Tegra114 I2C driver makes incompatible with
 	previous hardware driver. Hence, tegra114 I2C controller is compatible
 	with "nvidia,tegra114-i2c".
-  nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is part of the
-	host1x domain and typically used for camera use-cases. This VI I2C
-	controller is mostly compatible with the programming model of the
-	regular I2C controllers with a few exceptions. The I2C registers start
-	at an offset of 0xc00 (instead of 0), registers are 16 bytes apart
-	(rather than 4) and the controller does not support slave mode.
+  nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is on host1x bus
+	and is part of VE power domain and typically used for camera use-cases.
+	This VI I2C controller is mostly compatible with the programming model
+	of the regular I2C controllers with a few exceptions. The I2C registers
+	start at an offset of 0xc00 (instead of 0), registers are 16 bytes
+	apart (rather than 4) and the controller does not support slave mode.
 - reg: Should contain I2C controller registers physical address and length.
 - interrupts: Should contain I2C controller interrupts.
 - address-cells: Address cells for I2C device address.
@@ -53,10 +53,17 @@ Required properties:
   - fast-clk
   Tegra114:
   - div-clk
+  Tegra210:
+  - div-clk
+  - slow (only for nvidia,tegra210-i2c-vi compatible node)
 - resets: Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names: Must include the following entries:
   - i2c
+- power-domains: Only for nvidia,tegra210-i2c-vi compatible node and must
+  include venc powergate node as vi i2c is part of VE power domain.
+  tegra210-i2c-vi:
+  - pd_venc
 - dmas: Must contain an entry for each entry in clock-names.
   See ../dma/dma.txt for details.
 - dma-names: Must include the following entries:
diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
new file mode 100644
index 000000000000..03d0a232c75e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,j721e-system-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721e System Controller Registers R/W Device Tree Bindings
+
+description: |
+  This represents the Control Module registers (CTRL_MMR0) on the SoC.
+  System controller node represents a register region containing a set
+  of miscellaneous registers. The registers are not cohesive enough to
+  represent as any specific type of device. The typical use-case is
+  for some other node's driver, or platform-specific code, to acquire
+  a reference to the syscon node (e.g. by phandle, node path, or
+  search using a specific compatible value), interrogate the node (or
+  associated OS driver) to determine the location of the registers,
+  and access the registers directly.
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+  - Roger Quadros <rogerq@ti.com
+
+properties:
+  compatible:
+    anyOf:
+      - items:
+        - enum:
+           - ti,j721e-system-controller
+        - const: syscon
+        - const: simple-mfd
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+# Optional children
+
+  "^serdes-ln-ctrl@[0-9a-f]+$":
+    type: object
+    description: |
+      This is the SERDES lane control mux. It should follow the bindings
+      specified in
+      Documentation/devicetree/bindings/mux/reg-mux.txt
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    scm_conf: scm-conf@100000 {
+        compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+        reg = <0x00100000 0x1c000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+            compatible = "mmio-mux";
+            reg = <0x00004080 0x50>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
index 55b6ab2d8784..ec2aaeee78dc 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -25,6 +25,7 @@ properties:
       - renesas,r8a774a1-sysc # RZ/G2M
       - renesas,r8a774b1-sysc # RZ/G2N
       - renesas,r8a774c0-sysc # RZ/G2E
+      - renesas,r8a774e1-sysc # RZ/G2H
       - renesas,r8a7779-sysc  # R-Car H1
       - renesas,r8a7790-sysc  # R-Car H2
       - renesas,r8a7791-sysc  # R-Car M2-W
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
index 4c2b429ac702..2849ce45703c 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.yaml
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
@@ -31,6 +31,7 @@ properties:
       - renesas,r8a774a1-rst      # RZ/G2M
       - renesas,r8a774b1-rst      # RZ/G2N
       - renesas,r8a774c0-rst      # RZ/G2E
+      - renesas,r8a774e1-rst      # RZ/G2H
       - renesas,r8a7778-reset-wdt # R-Car M1A
       - renesas,r8a7779-reset-wdt # R-Car H1
       - renesas,r8a7790-rst       # R-Car H2
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
index 6ae79d1843f3..3f0e2a5950eb 100644
--- a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
@@ -1,7 +1,9 @@
 Atmel AT91SAM9260 Real Time Timer
 
 Required properties:
-- compatible: should be: "atmel,at91sam9260-rtt"
+- compatible: should be one of the following:
+	- "atmel,at91sam9260-rtt"
+	- "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"
 - reg: should encode the memory region of the RTT controller
 - interrupts: rtt alarm/event interrupt
 - clocks: should contain the 32 KHz slow clk that will drive the RTT block.
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d7be931b42d2..53a60c1721e6 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -40,6 +40,8 @@ properties:
               - qcom,msm8998-tsens
               - qcom,sc7180-tsens
               - qcom,sdm845-tsens
+              - qcom,sm8150-tsens
+              - qcom,sm8250-tsens
           - const: qcom,tsens-v2
 
   reg:
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 9352a8ef60a6..4ff632d82858 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -44,7 +44,9 @@ properties:
       - const: st,stm32f4x9-hsotg
       - const: st,stm32f7-hsotg
       - const: st,stm32mp15-fsotg
-      - const: st,stm32mp15-hsotg
+      - items:
+          - const: st,stm32mp15-hsotg
+          - const: snps,dwc2
       - const: samsung,s3c6400-hsotg
 
   reg:
@@ -93,7 +95,7 @@ properties:
   vusb_a-supply:
     description: phandle to voltage regulator of analog section.
 
-  vusb33d-supply:
+  usb33d-supply:
     description: reference to the VBUS and ID sensing comparators supply, in
       order to perform OTG operation, used on STM32MP15 SoCs.
 
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9aeab66be85f..9f7af78d6864 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -27,6 +27,8 @@ patternProperties:
     description: Abilis Systems
   "^abracon,.*":
     description: Abracon Corporation
+  "^acer,.*":
+    description: Acer Inc.
   "^acme,.*":
     description: Acme Systems srl
   "^actions,.*":