Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 3.10.

  Wierd bits:
   - OMAP drm changes required OMAP dss changes, in drivers/video, so I
     took them in here.
   - one more fbcon fix for font handover
   - VT switch avoidance in pm code
   - scatterlist helpers for gpu drivers - have acks from akpm

  Highlights:
   - qxl kms driver - driver for the spice qxl virtual GPU

  Nouveau:
   - fermi/kepler VRAM compression
   - GK110/nvf0 modesetting support.

  Tegra:
   - host1x core merged with 2D engine support

  i915:
   - vt switchless resume
   - more valleyview support
   - vblank fixes
   - modesetting pipe config rework

  radeon:
   - UVD engine support
   - SI chip tiling support
   - GPU registers initialisation from golden values.

  exynos:
   - device tree changes
   - fimc block support

  Otherwise:
   - bunches of fixes all over the place."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits)
  qxl: update to new idr interfaces.
  drm/nouveau: fix build with nv50->nvc0
  drm/radeon: fix handling of v6 power tables
  drm/radeon: clarify family checks in pm table parsing
  drm/radeon: consolidate UVD clock programming
  drm/radeon: fix UPLL_REF_DIV_MASK definition
  radeon: add bo tracking debugfs
  drm/radeon: add new richland pci ids
  drm/radeon: add some new SI PCI ids
  drm/radeon: fix scratch reg handling for UVD fence
  drm/radeon: allocate SA bo in the requested domain
  drm/radeon: fix possible segfault when parsing pm tables
  drm/radeon: fix endian bugs in atom_allocate_fb_scratch()
  OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found
  OMAPDSS: VENC: Add error handling for venc_probe_pdata
  OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata
  OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata
  OMAPDSS: DSI: Add error handling for dsi_probe_pdata
  OMAPDSS: SDI: Add error handling for sdi_probe_pdata
  OMAPDSS: DPI: Add error handling for dpi_probe_pdata
  ...

3 files changed, 50 insertions, 28 deletions

diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S
new file mode 100644
index 000000000000..0ded64cfd1f5
--- /dev/null
+++ b/Documentation/EDID/1600x1200.S
@@ -0,0 +1,44 @@
+/*
+   1600x1200.S: EDID data set for standard 1600x1200 60 Hz monitor
+
+   Copyright (C) 2013 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 162000 /* kHz */
+#define XPIX 1600
+#define YPIX 1200
+#define XY_RATIO XY_RATIO_4_3
+#define XBLANK 560
+#define YBLANK 50
+#define XOFFSET 64
+#define XPULSE 192
+#define YOFFSET (63+1)
+#define YPULSE (63+3)
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux UXGA"
+#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+#define CRC 0x9d
+
+#include "edid.S"
diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt
index 2d0a8f09475d..7146db1d9e8c 100644
--- a/Documentation/EDID/HOWTO.txt
+++ b/Documentation/EDID/HOWTO.txt
@@ -18,12 +18,12 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an
 individually prepared or corrected EDID data set in the /lib/firmware
 directory from where it is loaded via the firmware interface. The code
 (see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for
-commonly used screen resolutions (1024x768, 1280x1024, 1680x1050,
-1920x1080) as binary blobs, but the kernel source tree does not contain
-code to create these data. In order to elucidate the origin of the
-built-in binary EDID blobs and to facilitate the creation of individual
-data for a specific misbehaving monitor, commented sources and a
-Makefile environment are given here.
+commonly used screen resolutions (1024x768, 1280x1024, 1600x1200,
+1680x1050, 1920x1080) as binary blobs, but the kernel source tree does
+not contain code to create these data. In order to elucidate the origin
+of the built-in binary EDID blobs and to facilitate the creation of
+individual data for a specific misbehaving monitor, commented sources
+and a Makefile environment are given here.
 
 To create binary EDID and C source code files from the existing data
 material, simply type "make".
diff --git a/Documentation/devicetree/bindings/drm/exynos/g2d.txt b/Documentation/devicetree/bindings/drm/exynos/g2d.txt
deleted file mode 100644
index 1eb124d35a99..000000000000
--- a/Documentation/devicetree/bindings/drm/exynos/g2d.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Samsung 2D Graphic Accelerator using DRM frame work
-
-Samsung FIMG2D is a graphics 2D accelerator which supports Bit Block Transfer.
-We set the drawing-context registers for configuring rendering parameters and
-then start rendering.
-This driver is for SOCs which contain G2D IPs with version 4.1.
-
-Required properties:
-	-compatible:
-		should be "samsung,exynos-g2d-41".
-	-reg:
-		physical base address of the controller and length
-		of memory mapped region.
-	-interrupts:
-		interrupt combiner values.
-
-Example:
-	g2d {
-		compatible = "samsung,exynos-g2d-41";
-		reg = <0x10850000 0x1000>;
-		interrupts = <0 91 0>;
-	};