Merge tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull Intel TDX support from Borislav Petkov:
 "Intel Trust Domain Extensions (TDX) support.

  This is the Intel version of a confidential computing solution called
  Trust Domain Extensions (TDX). This series adds support to run the
  kernel as part of a TDX guest. It provides similar guest protections
  to AMD's SEV-SNP like guest memory and register state encryption,
  memory integrity protection and a lot more.

  Design-wise, it differs from AMD's solution considerably: it uses a
  software module which runs in a special CPU mode called (Secure
  Arbitration Mode) SEAM. As the name suggests, this module serves as
  sort of an arbiter which the confidential guest calls for services it
  needs during its lifetime.

  Just like AMD's SNP set, this series reworks and streamlines certain
  parts of x86 arch code so that this feature can be properly
  accomodated"

* tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  x86/tdx: Fix RETs in TDX asm
  x86/tdx: Annotate a noreturn function
  x86/mm: Fix spacing within memory encryption features message
  x86/kaslr: Fix build warning in KASLR code in boot stub
  Documentation/x86: Document TDX kernel architecture
  ACPICA: Avoid cache flush inside virtual machines
  x86/tdx/ioapic: Add shared bit for IOAPIC base address
  x86/mm: Make DMA memory shared for TD guest
  x86/mm/cpa: Add support for TDX shared memory
  x86/tdx: Make pages shared in ioremap()
  x86/topology: Disable CPU online/offline control for TDX guests
  x86/boot: Avoid #VE during boot for TDX platforms
  x86/boot: Set CR0.NE early and keep it set during the boot
  x86/acpi/x86/boot: Add multiprocessor wake-up support
  x86/boot: Add a trampoline for booting APs via firmware handoff
  x86/tdx: Wire up KVM hypercalls
  x86/tdx: Port I/O: Add early boot support
  x86/tdx: Port I/O: Add runtime hypercalls
  x86/boot: Port I/O: Add decompression-time support for TDX
  x86/boot: Port I/O: Allow to hook up alternative helpers
  ...

2 files changed, 219 insertions, 0 deletions

diff --git a/Documentation/x86/index.rst b/Documentation/x86/index.rst
index 91b2fa456618..51982dee6c2a 100644
--- a/Documentation/x86/index.rst
+++ b/Documentation/x86/index.rst
@@ -26,6 +26,7 @@ x86-specific Documentation
    intel_txt
    amd-memory-encryption
    amd_hsmp
+   tdx
    pti
    mds
    microcode
diff --git a/Documentation/x86/tdx.rst b/Documentation/x86/tdx.rst
new file mode 100644
index 000000000000..b8fa4329e1a5
--- /dev/null
+++ b/Documentation/x86/tdx.rst
@@ -0,0 +1,218 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Intel Trust Domain Extensions (TDX)
+=====================================
+
+Intel's Trust Domain Extensions (TDX) protect confidential guest VMs from
+the host and physical attacks by isolating the guest register state and by
+encrypting the guest memory. In TDX, a special module running in a special
+mode sits between the host and the guest and manages the guest/host
+separation.
+
+Since the host cannot directly access guest registers or memory, much
+normal functionality of a hypervisor must be moved into the guest. This is
+implemented using a Virtualization Exception (#VE) that is handled by the
+guest kernel. A #VE is handled entirely inside the guest kernel, but some
+require the hypervisor to be consulted.
+
+TDX includes new hypercall-like mechanisms for communicating from the
+guest to the hypervisor or the TDX module.
+
+New TDX Exceptions
+==================
+
+TDX guests behave differently from bare-metal and traditional VMX guests.
+In TDX guests, otherwise normal instructions or memory accesses can cause
+#VE or #GP exceptions.
+
+Instructions marked with an '*' conditionally cause exceptions.  The
+details for these instructions are discussed below.
+
+Instruction-based #VE
+---------------------
+
+- Port I/O (INS, OUTS, IN, OUT)
+- HLT
+- MONITOR, MWAIT
+- WBINVD, INVD
+- VMCALL
+- RDMSR*,WRMSR*
+- CPUID*
+
+Instruction-based #GP
+---------------------
+
+- All VMX instructions: INVEPT, INVVPID, VMCLEAR, VMFUNC, VMLAUNCH,
+  VMPTRLD, VMPTRST, VMREAD, VMRESUME, VMWRITE, VMXOFF, VMXON
+- ENCLS, ENCLU
+- GETSEC
+- RSM
+- ENQCMD
+- RDMSR*,WRMSR*
+
+RDMSR/WRMSR Behavior
+--------------------
+
+MSR access behavior falls into three categories:
+
+- #GP generated
+- #VE generated
+- "Just works"
+
+In general, the #GP MSRs should not be used in guests.  Their use likely
+indicates a bug in the guest.  The guest may try to handle the #GP with a
+hypercall but it is unlikely to succeed.
+
+The #VE MSRs are typically able to be handled by the hypervisor.  Guests
+can make a hypercall to the hypervisor to handle the #VE.
+
+The "just works" MSRs do not need any special guest handling.  They might
+be implemented by directly passing through the MSR to the hardware or by
+trapping and handling in the TDX module.  Other than possibly being slow,
+these MSRs appear to function just as they would on bare metal.
+
+CPUID Behavior
+--------------
+
+For some CPUID leaves and sub-leaves, the virtualized bit fields of CPUID
+return values (in guest EAX/EBX/ECX/EDX) are configurable by the
+hypervisor. For such cases, the Intel TDX module architecture defines two
+virtualization types:
+
+- Bit fields for which the hypervisor controls the value seen by the guest
+  TD.
+
+- Bit fields for which the hypervisor configures the value such that the
+  guest TD either sees their native value or a value of 0.  For these bit
+  fields, the hypervisor can mask off the native values, but it can not
+  turn *on* values.
+
+A #VE is generated for CPUID leaves and sub-leaves that the TDX module does
+not know how to handle. The guest kernel may ask the hypervisor for the
+value with a hypercall.
+
+#VE on Memory Accesses
+======================
+
+There are essentially two classes of TDX memory: private and shared.
+Private memory receives full TDX protections.  Its content is protected
+against access from the hypervisor.  Shared memory is expected to be
+shared between guest and hypervisor and does not receive full TDX
+protections.
+
+A TD guest is in control of whether its memory accesses are treated as
+private or shared.  It selects the behavior with a bit in its page table
+entries.  This helps ensure that a guest does not place sensitive
+information in shared memory, exposing it to the untrusted hypervisor.
+
+#VE on Shared Memory
+--------------------
+
+Access to shared mappings can cause a #VE.  The hypervisor ultimately
+controls whether a shared memory access causes a #VE, so the guest must be
+careful to only reference shared pages it can safely handle a #VE.  For
+instance, the guest should be careful not to access shared memory in the
+#VE handler before it reads the #VE info structure (TDG.VP.VEINFO.GET).
+
+Shared mapping content is entirely controlled by the hypervisor. The guest
+should only use shared mappings for communicating with the hypervisor.
+Shared mappings must never be used for sensitive memory content like kernel
+stacks.  A good rule of thumb is that hypervisor-shared memory should be
+treated the same as memory mapped to userspace.  Both the hypervisor and
+userspace are completely untrusted.
+
+MMIO for virtual devices is implemented as shared memory.  The guest must
+be careful not to access device MMIO regions unless it is also prepared to
+handle a #VE.
+
+#VE on Private Pages
+--------------------
+
+An access to private mappings can also cause a #VE.  Since all kernel
+memory is also private memory, the kernel might theoretically need to
+handle a #VE on arbitrary kernel memory accesses.  This is not feasible, so
+TDX guests ensure that all guest memory has been "accepted" before memory
+is used by the kernel.
+
+A modest amount of memory (typically 512M) is pre-accepted by the firmware
+before the kernel runs to ensure that the kernel can start up without
+being subjected to a #VE.
+
+The hypervisor is permitted to unilaterally move accepted pages to a
+"blocked" state. However, if it does this, page access will not generate a
+#VE.  It will, instead, cause a "TD Exit" where the hypervisor is required
+to handle the exception.
+
+Linux #VE handler
+=================
+
+Just like page faults or #GP's, #VE exceptions can be either handled or be
+fatal.  Typically, an unhandled userspace #VE results in a SIGSEGV.
+An unhandled kernel #VE results in an oops.
+
+Handling nested exceptions on x86 is typically nasty business.  A #VE
+could be interrupted by an NMI which triggers another #VE and hilarity
+ensues.  The TDX #VE architecture anticipated this scenario and includes a
+feature to make it slightly less nasty.
+
+During #VE handling, the TDX module ensures that all interrupts (including
+NMIs) are blocked.  The block remains in place until the guest makes a
+TDG.VP.VEINFO.GET TDCALL.  This allows the guest to control when interrupts
+or a new #VE can be delivered.
+
+However, the guest kernel must still be careful to avoid potential
+#VE-triggering actions (discussed above) while this block is in place.
+While the block is in place, any #VE is elevated to a double fault (#DF)
+which is not recoverable.
+
+MMIO handling
+=============
+
+In non-TDX VMs, MMIO is usually implemented by giving a guest access to a
+mapping which will cause a VMEXIT on access, and then the hypervisor
+emulates the access.  That is not possible in TDX guests because VMEXIT
+will expose the register state to the host. TDX guests don't trust the host
+and can't have their state exposed to the host.
+
+In TDX, MMIO regions typically trigger a #VE exception in the guest.  The
+guest #VE handler then emulates the MMIO instruction inside the guest and
+converts it into a controlled TDCALL to the host, rather than exposing
+guest state to the host.
+
+MMIO addresses on x86 are just special physical addresses. They can
+theoretically be accessed with any instruction that accesses memory.
+However, the kernel instruction decoding method is limited. It is only
+designed to decode instructions like those generated by io.h macros.
+
+MMIO access via other means (like structure overlays) may result in an
+oops.
+
+Shared Memory Conversions
+=========================
+
+All TDX guest memory starts out as private at boot.  This memory can not
+be accessed by the hypervisor.  However, some kernel users like device
+drivers might have a need to share data with the hypervisor.  To do this,
+memory must be converted between shared and private.  This can be
+accomplished using some existing memory encryption helpers:
+
+ * set_memory_decrypted() converts a range of pages to shared.
+ * set_memory_encrypted() converts memory back to private.
+
+Device drivers are the primary user of shared memory, but there's no need
+to touch every driver. DMA buffers and ioremap() do the conversions
+automatically.
+
+TDX uses SWIOTLB for most DMA allocations. The SWIOTLB buffer is
+converted to shared on boot.
+
+For coherent DMA allocation, the DMA buffer gets converted on the
+allocation. Check force_dma_unencrypted() for details.
+
+References
+==========
+
+TDX reference material is collected here:
+
+https://www.intel.com/content/www/us/en/developer/articles/technical/intel-trust-domain-extensions.html