Merge tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - DVB core changes to avoid refcount troubles and UAF

 - DVB API/core has gained support for DVB-C2 and DVB-S2X

 - New sensor drivers: ov08x40, ov4689.c, st-vgxy61 and tc358746.c

 - Removal of an unused sensor driver: s5k4ecgx

 - Move microchip_csi2dc to a new directory, named after the
   manufacturer

 - Add media controller support to Microship drivers

 - Old Atmel/Microship drivers that don't use media controler got moved
   to staging

 - New drivers added for Renesas RZ/G2L CRU and MIPI CSI-2 support

 - Allwinner A31 camera sensor driver code was now split into a bridge
   and a separate processor driver

 - Added a virtual stateless decoder driver in order to test core
   support for stateless drivers and test userspace apps using it

 - removed platform-based support for ov9650, as this is not used
   anymore

 - atomisp now uses videobuf2 and supports normal mmap mode

 - the imx7-media-csi driver got promoted from staging

 - rcar-vin driver has gained support for gen3 UDS (Up Down Scaler)

 - most i2c drivers now use I2C .probe_new() kAPI

 - lots of drivers fixes, cleanups and improvements

* tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits)
  media: s5c73m3: Switch to GPIO descriptors
  media: i2c: s5k5baf: switch to using gpiod API
  media: i2c: s5k6a3: switch to using gpiod API
  media: imx: remove code for non-existing config IMX_GPT_ICAP
  media: si470x: Fix use-after-free in si470x_int_in_callback()
  media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
  media: coda: Add check for kmalloc
  media: coda: Add check for dcoda_iram_alloc
  dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
  media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
  media: s5k4ecgx: Delete driver
  media: s5k4ecgx: Switch to GPIO descriptors
  media: Switch to use dev_err_probe() helper
  headers: Remove some left-over license text in include/uapi/linux/v4l2-*
  headers: Remove some left-over license text in include/uapi/linux/dvb/
  media: usb: pwc-uncompress: Use flex array destination for memcpy()
  media: s5p-mfc: Fix to handle reference queue during finishing
  media: s5p-mfc: Clear workbit to handle error condition
  media: s5p-mfc: Fix in register read and write for H264
  media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
  ...

11 files changed, 211 insertions, 17 deletions

diff --git a/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst b/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst
index b0efce40471f..411d42a742f3 100644
--- a/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst
+++ b/Documentation/userspace-api/media/cec/cec-pin-error-inj.rst
@@ -1,5 +1,7 @@
 .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
 
+.. _cec_pin_error_inj:
+
 CEC Pin Framework Error Injection
 =================================
 
diff --git a/Documentation/userspace-api/media/drivers/aspeed-video.rst b/Documentation/userspace-api/media/drivers/aspeed-video.rst
new file mode 100644
index 000000000000..1b0cb1e3eba8
--- /dev/null
+++ b/Documentation/userspace-api/media/drivers/aspeed-video.rst
@@ -0,0 +1,65 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+ASPEED video driver
+===================
+
+ASPEED Video Engine found on AST2400/2500/2600 SoC supports high performance
+video compressions with a wide range of video quality and compression ratio
+options. The adopted compressing algorithm is a modified JPEG algorithm.
+
+There are 2 types of compressions in this IP.
+
+* JPEG JFIF standard mode: for single frame and management compression
+* ASPEED proprietary mode: for multi-frame and differential compression.
+  Support 2-pass (high quality) video compression scheme (Patent pending by
+  ASPEED). Provide visually lossless video compression quality or to reduce
+  the network average loading under intranet KVM applications.
+
+VIDIOC_S_FMT can be used to choose which format you want. V4L2_PIX_FMT_JPEG
+stands for JPEG JFIF standard mode; V4L2_PIX_FMT_AJPG stands for ASPEED
+proprietary mode.
+
+More details on the ASPEED video hardware operations can be found in
+*chapter 6.2.16 KVM Video Driver* of SDK_User_Guide which available on
+AspeedTech-BMC/openbmc/releases.
+
+The ASPEED video driver implements the following driver-specific control:
+
+``V4L2_CID_ASPEED_HQ_MODE``
+---------------------------
+    Enable/Disable ASPEED's High quality mode. This is a private control
+    that can be used to enable high quality for aspeed proprietary mode.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 4
+
+    * - ``(0)``
+      - ASPEED HQ mode is disabled.
+    * - ``(1)``
+      - ASPEED HQ mode is enabled.
+
+``V4L2_CID_ASPEED_HQ_JPEG_QUALITY``
+-----------------------------------
+    Define the quality of ASPEED's High quality mode. This is a private control
+    that can be used to decide compression quality if High quality mode enabled
+    . Higher the value, better the quality and bigger the size.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 4
+
+    * - ``(1)``
+      - minimum
+    * - ``(12)``
+      - maximum
+    * - ``(1)``
+      - step
+    * - ``(1)``
+      - default
+
+**Copyright** |copy| 2022 ASPEED Technology Inc.
diff --git a/Documentation/userspace-api/media/drivers/index.rst b/Documentation/userspace-api/media/drivers/index.rst
index 32f82aed47d9..915dbf0f4db5 100644
--- a/Documentation/userspace-api/media/drivers/index.rst
+++ b/Documentation/userspace-api/media/drivers/index.rst
@@ -31,6 +31,7 @@ For more details see the file COPYING in the source distribution of Linux.
 	:maxdepth: 5
 	:numbered:
 
+	aspeed-video
 	ccs
 	cx2341x-uapi
 	dw100
@@ -38,4 +39,5 @@ For more details see the file COPYING in the source distribution of Linux.
 	max2175
 	meye-uapi
 	omap3isp-uapi
+	st-vgxy61
 	uvcvideo
diff --git a/Documentation/userspace-api/media/drivers/st-vgxy61.rst b/Documentation/userspace-api/media/drivers/st-vgxy61.rst
new file mode 100644
index 000000000000..d9e3b80e3a96
--- /dev/null
+++ b/Documentation/userspace-api/media/drivers/st-vgxy61.rst
@@ -0,0 +1,25 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+ST VGXY61 camera sensor driver
+==============================
+
+The ST VGXY61 driver implements the following controls:
+
+``V4L2_CID_HDR_SENSOR_MODE``
+-------------------------------
+    Change the sensor HDR mode. A HDR picture is obtained by merging two
+    captures of the same scene using two different exposure periods.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 4
+
+    * - HDR linearize
+      - The merger outputs a long exposure capture as long as it is not
+        saturated.
+    * - HDR substraction
+      - This involves subtracting the short exposure frame from the long
+        exposure frame.
+    * - No HDR
+      - This mode is used for standard dynamic range (SDR) exposures.
diff --git a/Documentation/userspace-api/media/dvb/fe_property_parameters.rst b/Documentation/userspace-api/media/dvb/fe_property_parameters.rst
index ecd84a8790a2..1717a0565fe8 100644
--- a/Documentation/userspace-api/media/dvb/fe_property_parameters.rst
+++ b/Documentation/userspace-api/media/dvb/fe_property_parameters.rst
@@ -89,16 +89,21 @@ ATSC (version 1)	8-VSB and 16-VSB.
 DMTB			4-QAM, 16-QAM, 32-QAM, 64-QAM and 4-QAM-NR.
 DVB-C Annex A/C		16-QAM, 32-QAM, 64-QAM and 256-QAM.
 DVB-C Annex B		64-QAM.
+DVB-C2			QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM and 4096-QAM.
 DVB-T			QPSK, 16-QAM and 64-QAM.
 DVB-T2			QPSK, 16-QAM, 64-QAM and 256-QAM.
 DVB-S			No need to set. It supports only QPSK.
 DVB-S2			QPSK, 8-PSK, 16-APSK and 32-APSK.
+DVB-S2X			8-APSK-L, 16-APSK-L, 32-APSK-L, 64-APSK and 64-APSK-L.
 ISDB-T			QPSK, DQPSK, 16-QAM and 64-QAM.
 ISDB-S			8-PSK, QPSK and BPSK.
 ======================= =======================================================
 
 .. note::
 
+   As DVB-S2X specifies extensions to the DVB-S2 standard, the same
+   delivery system enum value is used (SYS_DVBS2).
+
    Please notice that some of the above modulation types may not be
    defined currently at the Kernel. The reason is simple: no driver
    needed such definition yet.
@@ -854,9 +859,10 @@ The acceptable values are defined by :c:type:`fe_guard_interval`.
    #. If ``DTV_GUARD_INTERVAL`` is set the ``GUARD_INTERVAL_AUTO`` the
       hardware will try to find the correct guard interval (if capable) and
       will use TMCC to fill in the missing parameters.
-   #. Intervals ``GUARD_INTERVAL_1_128``, ``GUARD_INTERVAL_19_128``
-      and ``GUARD_INTERVAL_19_256`` are used only for DVB-T2 at
-      present.
+   #. Interval ``GUARD_INTERVAL_1_64`` is used only for DVB-C2.
+   #. Interval ``GUARD_INTERVAL_1_128`` is used for both DVB-C2 and DVB_T2.
+   #. Intervals ``GUARD_INTERVAL_19_128`` and ``GUARD_INTERVAL_19_256`` are
+      used only for DVB-T2.
    #. Intervals ``GUARD_INTERVAL_PN420``, ``GUARD_INTERVAL_PN595`` and
       ``GUARD_INTERVAL_PN945`` are used only for DMTB at the present.
       On such standard, only those intervals and ``GUARD_INTERVAL_AUTO``
@@ -916,14 +922,15 @@ The acceptable values are defined by :c:type:`fe_hierarchy`.
 DTV_STREAM_ID
 =============
 
-Used on DVB-S2, DVB-T2 and ISDB-S.
+Used on DVB-C2, DVB-S2, DVB-T2 and ISDB-S.
 
-DVB-S2, DVB-T2 and ISDB-S support the transmission of several streams on
-a single transport stream. This property enables the digital TV driver to
-handle substream filtering, when supported by the hardware. By default,
-substream filtering is disabled.
+DVB-C2, DVB-S2, DVB-T2 and ISDB-S support the transmission of several
+streams on a single transport stream. This property enables the digital
+TV driver to handle substream filtering, when supported by the hardware.
+By default, substream filtering is disabled.
 
-For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255.
+For DVB-C2, DVB-S2 and DVB-T2, the valid substream id range is from 0 to
+255.
 
 For ISDB, the valid substream id range is from 1 to 65535.
 
diff --git a/Documentation/userspace-api/media/frontend.h.rst.exceptions b/Documentation/userspace-api/media/frontend.h.rst.exceptions
index 6283702c08c8..8b73fee11a79 100644
--- a/Documentation/userspace-api/media/frontend.h.rst.exceptions
+++ b/Documentation/userspace-api/media/frontend.h.rst.exceptions
@@ -86,6 +86,13 @@ ignore symbol APSK_16
 ignore symbol APSK_32
 ignore symbol DQPSK
 ignore symbol QAM_4_NR
+ignore symbol QAM_1024
+ignore symbol QAM_4096
+ignore symbol APSK_8_L
+ignore symbol APSK_16_L
+ignore symbol APSK_32_L
+ignore symbol APSK_64
+ignore symbol APSK_64_L
 
 ignore symbol SEC_VOLTAGE_13
 ignore symbol SEC_VOLTAGE_18
@@ -119,6 +126,22 @@ ignore symbol FEC_AUTO
 ignore symbol FEC_3_5
 ignore symbol FEC_9_10
 ignore symbol FEC_2_5
+ignore symbol FEC_1_3
+ignore symbol FEC_1_4
+ignore symbol FEC_5_9
+ignore symbol FEC_7_9
+ignore symbol FEC_8_15
+ignore symbol FEC_11_15
+ignore symbol FEC_13_18
+ignore symbol FEC_9_20
+ignore symbol FEC_11_20
+ignore symbol FEC_23_36
+ignore symbol FEC_25_36
+ignore symbol FEC_13_45
+ignore symbol FEC_26_45
+ignore symbol FEC_28_45
+ignore symbol FEC_32_45
+ignore symbol FEC_77_90
 
 ignore symbol TRANSMISSION_MODE_AUTO
 ignore symbol TRANSMISSION_MODE_1K
@@ -143,6 +166,7 @@ ignore symbol GUARD_INTERVAL_19_256
 ignore symbol GUARD_INTERVAL_PN420
 ignore symbol GUARD_INTERVAL_PN595
 ignore symbol GUARD_INTERVAL_PN945
+ignore symbol GUARD_INTERVAL_1_64
 
 ignore symbol HIERARCHY_NONE
 ignore symbol HIERARCHY_AUTO
@@ -163,6 +187,9 @@ ignore symbol ROLLOFF_35
 ignore symbol ROLLOFF_20
 ignore symbol ROLLOFF_25
 ignore symbol ROLLOFF_AUTO
+ignore symbol ROLLOFF_15
+ignore symbol ROLLOFF_10
+ignore symbol ROLLOFF_5
 
 ignore symbol INVERSION_ON
 ignore symbol INVERSION_OFF
@@ -187,6 +214,7 @@ ignore symbol SYS_DAB
 ignore symbol SYS_DSS
 ignore symbol SYS_CMMB
 ignore symbol SYS_DVBH
+ignore symbol SYS_DVBC2
 
 ignore symbol ATSCMH_SCCC_BLK_SEP
 ignore symbol ATSCMH_SCCC_BLK_COMB
diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst
index 4638ec64db00..04dec3e570ed 100644
--- a/Documentation/userspace-api/media/v4l/buffer.rst
+++ b/Documentation/userspace-api/media/v4l/buffer.rst
@@ -187,10 +187,8 @@ struct v4l2_buffer
 	on the negotiated data format and may change with each buffer for
 	compressed variable size data like JPEG images. Drivers must set
 	this field when ``type`` refers to a capture stream, applications
-	when it refers to an output stream. If the application sets this
-	to 0 for an output stream, then ``bytesused`` will be set to the
-	size of the buffer (see the ``length`` field of this struct) by
-	the driver. For multiplanar formats this field is ignored and the
+	when it refers to an output stream. For multiplanar formats this field
+        is ignored and the
 	``planes`` pointer is used instead.
     * - __u32
       - ``flags``
@@ -327,10 +325,7 @@ struct v4l2_plane
       - ``bytesused``
       - The number of bytes occupied by data in the plane (its payload).
 	Drivers must set this field when ``type`` refers to a capture
-	stream, applications when it refers to an output stream. If the
-	application sets this to 0 for an output stream, then
-	``bytesused`` will be set to the size of the plane (see the
-	``length`` field of this struct) by the driver.
+	stream, applications when it refers to an output stream.
 
 	.. note::
 
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
index 4c5061aa9cd4..daa4f40869f8 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
@@ -661,3 +661,11 @@ enum v4l2_scene_mode -
 .. [#f1]
    This control may be changed to a menu control in the future, if more
    options are required.
+
+``V4L2_CID_HDR_SENSOR_MODE (menu)``
+    Change the sensor HDR mode. A HDR picture is obtained by merging two
+    captures of the same scene using two different exposure periods. HDR mode
+    describes the way these two captures are merged in the sensor.
+
+    As modes differ for each sensor, menu items are not standardized by this
+    control and are left to the programmer.
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
index 0ff68cd8cf62..73cd99828010 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
@@ -258,6 +258,23 @@ please make a proposal on the linux-media mailing list.
         and it is used by various multimedia hardware blocks like GPU, display
         controllers, ISP and video accelerators.
         It contains four planes for progressive video.
+    * .. _V4L2-PIX-FMT-AJPG:
+
+      - ``V4L2_PIX_FMT_AJPG``
+      - 'AJPG'
+      - ASPEED JPEG format used by the aspeed-video driver on Aspeed platforms,
+        which is generally adapted for remote KVM.
+        On each frame compression, I will compare the new frame with previous
+        one to decide which macroblock's data is changed, and only the changed
+        macroblocks will be compressed.
+
+        The implementation is based on AST2600 A3 datasheet, revision 0.9, which
+        is not publicly available. Or you can reference Video stream data format
+        – ASPEED mode compression of SDK_User_Guide which available on
+        AspeedTech-BMC/openbmc/releases.
+
+        Decoder's implementation can be found here,
+        `aspeed_codec <https://github.com/AspeedTech-BMC/aspeed_codec/>`__
 .. raw:: latex
 
     \normalsize
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
index 10b1feeb0b57..f1d5bb7b806d 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
@@ -273,7 +273,9 @@ of the luma plane.
 .. _V4L2-PIX-FMT-NV12-16L16:
 .. _V4L2-PIX-FMT-NV12-32L32:
 .. _V4L2-PIX-FMT-NV12M-8L128:
+.. _V4L2-PIX-FMT-NV12-8L128:
 .. _V4L2-PIX-FMT-NV12M-10BE-8L128:
+.. _V4L2-PIX-FMT-NV12-10BE-8L128:
 .. _V4L2-PIX-FMT-MM21:
 
 Tiled NV12
@@ -319,6 +321,9 @@ pixels in 2D 8x128 tiles, and stores tiles linearly in memory.
 The image height must be aligned to a multiple of 128.
 The layouts of the luma and chroma planes are identical.
 
+``V4L2_PIX_FMT_NV12_8L128`` is similar to ``V4L2_PIX_FMT_NV12M_8L128`` but stores
+two planes in one memory.
+
 ``V4L2_PIX_FMT_NV12M_10BE_8L128`` is similar to ``V4L2_PIX_FMT_NV12M`` but stores
 10 bits pixels in 2D 8x128 tiles, and stores tiles linearly in memory.
 the data is arranged in big endian order.
@@ -334,6 +339,9 @@ byte 2: Y1(bits 3-0) Y2(bits 9-6)
 byte 3: Y2(bits 5-0) Y3(bits 9-8)
 byte 4: Y3(bits 7-0)
 
+``V4L2_PIX_FMT_NV12_10BE_8L128`` is similar to ``V4L2_PIX_FMT_NV12M_10BE_8L128`` but stores
+two planes in one memory.
+
 ``V4L2_PIX_FMT_MM21`` store luma pixel in 16x32 tiles, and chroma pixels
 in 16x16 tiles. The line stride must be aligned to a multiple of 16 and the
 image height must be aligned to a multiple of 32. The number of luma and chroma
diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst
index d21d532eee15..16ef3b41932e 100644
--- a/Documentation/userspace-api/media/v4l/subdev-formats.rst
+++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst
@@ -6057,6 +6057,43 @@ the following codes.
       - y\ :sub:`2`
       - y\ :sub:`1`
       - y\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-Y16-1X16:
+
+      - MEDIA_BUS_FMT_Y16_1X16
+      - 0x202e
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - y\ :sub:`15`
+      - y\ :sub:`14`
+      - y\ :sub:`13`
+      - y\ :sub:`12`
+      - y\ :sub:`11`
+      - y\ :sub:`10`
+      - y\ :sub:`9`
+      - y\ :sub:`8`
+      - y\ :sub:`7`
+      - y\ :sub:`6`
+      - y\ :sub:`5`
+      - y\ :sub:`4`
+      - y\ :sub:`3`
+      - y\ :sub:`2`
+      - y\ :sub:`1`
+      - y\ :sub:`0`
     * .. _MEDIA-BUS-FMT-UYVY8-1X16:
 
       - MEDIA_BUS_FMT_UYVY8_1X16