diff options
| author | Shay Drory <shayd@nvidia.com> | 2022-12-06 20:51:15 +0200 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2022-12-07 20:09:18 -0800 |
| commit | da65e9ff3bf614d2836e38e1d405c7073e6ba3b7 (patch) | |
| tree | c90d6feafc4b3aa3244a4f0e6fe75eaa834defec /Documentation/networking | |
| parent | 875cd5eeba96091d97ce27e6e9b855fba9d2e0fc (diff) | |
| download | linux-da65e9ff3bf614d2836e38e1d405c7073e6ba3b7.tar.bz2 | |
devlink: Expose port function commands to control RoCE
Expose port function commands to enable / disable RoCE, this is used to
control the port RoCE device capabilities.
When RoCE is disabled for a function of the port, function cannot create
any RoCE specific resources (e.g GID table).
It also saves system memory utilization. For example disabling RoCE enable a
VF/SF saves 1 Mbytes of system memory per function.
Example of a PCI VF port which supports function configuration:
Set RoCE of the VF's port function.
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 roce enable
$ devlink port function set pci/0000:06:00.0/2 roce disable
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 roce disable
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'Documentation/networking')
| -rw-r--r-- | Documentation/networking/devlink/devlink-port.rst | 34 |
1 files changed, 33 insertions, 1 deletions
diff --git a/Documentation/networking/devlink/devlink-port.rst b/Documentation/networking/devlink/devlink-port.rst index 2c637f4aae8e..c3302d23e480 100644 --- a/Documentation/networking/devlink/devlink-port.rst +++ b/Documentation/networking/devlink/devlink-port.rst @@ -110,7 +110,7 @@ devlink ports for both the controllers. Function configuration ====================== -A user can configure the function attribute before enumerating the PCI +Users can configure one or more function attributes before enumerating the PCI function. Usually it means, user should configure function attribute before a bus specific device for the function is created. However, when SRIOV is enabled, virtual function devices are created on the PCI bus. @@ -122,6 +122,9 @@ A user may set the hardware address of the function using `devlink port function set hw_addr` command. For Ethernet port function this means a MAC address. +Users may also set the RoCE capability of the function using +`devlink port function set roce` command. + Function attributes =================== @@ -162,6 +165,35 @@ device created for the PCI VF/SF. function: hw_addr 00:00:00:00:88:88 +RoCE capability setup +--------------------- +Not all PCI VFs/SFs require RoCE capability. + +When RoCE capability is disabled, it saves system memory per PCI VF/SF. + +When user disables RoCE capability for a VF/SF, user application cannot send or +receive any RoCE packets through this VF/SF and RoCE GID table for this PCI +will be empty. + +When RoCE capability is disabled in the device using port function attribute, +VF/SF driver cannot override it. + +- Get RoCE capability of the VF device:: + + $ devlink port show pci/0000:06:00.0/2 + pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 + function: + hw_addr 00:00:00:00:00:00 roce enable + +- Set RoCE capability of the VF device:: + + $ devlink port function set pci/0000:06:00.0/2 roce disable + + $ devlink port show pci/0000:06:00.0/2 + pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 + function: + hw_addr 00:00:00:00:00:00 roce disable + Subfunction ============ |