summaryrefslogtreecommitdiffstats
path: root/Documentation/i2c/writing-clients
diff options
context:
space:
mode:
authorDavid Brownell <david-b@pacbell.net>2007-05-01 23:26:31 +0200
committerJean Delvare <khali@hyperion.delvare>2007-05-01 23:26:31 +0200
commit4298cfc3eb6110df989f784be516c6340c597a66 (patch)
treeb542354286cef08dffb7f3f8a129e00b035db559 /Documentation/i2c/writing-clients
parenta1d9e6e49f4b473a6945a6b553f5070e8c793e0a (diff)
downloadlinux-4298cfc3eb6110df989f784be516c6340c597a66.tar.bz2
i2c: i2c probe() and remove() documented
Update Documentation/i2c to match previous patches updating probe() and remove() logic. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Diffstat (limited to 'Documentation/i2c/writing-clients')
-rw-r--r--Documentation/i2c/writing-clients82
1 files changed, 72 insertions, 10 deletions
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index fbcff96f4ca1..54255fd68ec7 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -1,5 +1,5 @@
This is a small guide for those who want to write kernel drivers for I2C
-or SMBus devices.
+or SMBus devices, using Linux as the protocol host/master (not slave).
To set up a driver, you need to do several things. Some are optional, and
some things can be done slightly or completely different. Use this as a
@@ -29,8 +29,16 @@ static struct i2c_driver foo_driver = {
.driver = {
.name = "foo",
},
+
+ /* iff driver uses driver model ("new style") binding model: */
+ .probe = foo_probe,
+ .remove = foo_remove,
+
+ /* else, driver uses "legacy" binding model: */
.attach_adapter = foo_attach_adapter,
.detach_client = foo_detach_client,
+
+ /* these may be used regardless of the driver binding model */
.shutdown = foo_shutdown, /* optional */
.suspend = foo_suspend, /* optional */
.resume = foo_resume, /* optional */
@@ -40,7 +48,8 @@ static struct i2c_driver foo_driver = {
The name field is the driver name, and must not contain spaces. It
should match the module name (if the driver can be compiled as a module),
although you can use MODULE_ALIAS (passing "foo" in this example) to add
-another name for the module.
+another name for the module. If the driver name doesn't match the module
+name, the module won't be automatically loaded (hotplug/coldplug).
All other fields are for call-back functions which will be explained
below.
@@ -141,6 +150,59 @@ Writing is done the same way.
Probing and attaching
=====================
+The Linux I2C stack was originally written to support access to hardware
+monitoring chips on PC motherboards, and thus it embeds some assumptions
+that are more appropriate to SMBus (and PCs) than to I2C. One of these
+assumptions is that most adapters and devices drivers support the SMBUS_QUICK
+protocol to probe device presence. Another is that devices and their drivers
+can be sufficiently configured using only such probe primitives.
+
+As Linux and its I2C stack became more widely used in embedded systems
+and complex components such as DVB adapters, those assumptions became more
+problematic. Drivers for I2C devices that issue interrupts need more (and
+different) configuration information, as do drivers handling chip variants
+that can't be distinguished by protocol probing, or which need some board
+specific information to operate correctly.
+
+Accordingly, the I2C stack now has two models for associating I2C devices
+with their drivers: the original "legacy" model, and a newer one that's
+fully compatible with the Linux 2.6 driver model. These models do not mix,
+since the "legacy" model requires drivers to create "i2c_client" device
+objects after SMBus style probing, while the Linux driver model expects
+drivers to be given such device objects in their probe() routines.
+
+
+Standard Driver Model Binding ("New Style")
+-------------------------------------------
+
+System infrastructure, typically board-specific initialization code or
+boot firmware, reports what I2C devices exist. For example, there may be
+a table, in the kernel or from the boot loader, identifying I2C devices
+and linking them to board-specific configuration information about IRQs
+and other wiring artifacts, chip type, and so on. That could be used to
+create i2c_client objects for each I2C device.
+
+I2C device drivers using this binding model work just like any other
+kind of driver in Linux: they provide a probe() method to bind to
+those devices, and a remove() method to unbind.
+
+ static int foo_probe(struct i2c_client *client);
+ static int foo_remove(struct i2c_client *client);
+
+Remember that the i2c_driver does not create those client handles. The
+handle may be used during foo_probe(). If foo_probe() reports success
+(zero not a negative status code) it may save the handle and use it until
+foo_remove() returns. That binding model is used by most Linux drivers.
+
+Drivers match devices when i2c_client.driver_name and the driver name are
+the same; this approach is used in several other busses that don't have
+device typing support in the hardware. The driver and module name should
+match, so hotplug/coldplug mechanisms will modprobe the driver.
+
+
+Legacy Driver Binding Model
+---------------------------
+
Most i2c devices can be present on several i2c addresses; for some this
is determined in hardware (by soldering some chip pins to Vcc or Ground),
for others this can be changed in software (by writing to specific client
@@ -162,8 +224,8 @@ NOTE: If you want to write a `sensors' driver, the interface is slightly
-Probing classes
----------------
+Probing classes (Legacy model)
+------------------------------
All parameters are given as lists of unsigned 16-bit integers. Lists are
terminated by I2C_CLIENT_END.
@@ -210,8 +272,8 @@ Note that you *have* to call the defined variable `normal_i2c',
without any prefix!
-Attaching to an adapter
------------------------
+Attaching to an adapter (Legacy model)
+--------------------------------------
Whenever a new adapter is inserted, or for all adapters if the driver is
being registered, the callback attach_adapter() is called. Now is the
@@ -237,8 +299,8 @@ them (unless a `force' parameter was used). In addition, addresses that
are already in use (by some other registered client) are skipped.
-The detect client function
---------------------------
+The detect client function (Legacy model)
+-----------------------------------------
The detect client function is called by i2c_probe. The `kind' parameter
contains -1 for a probed detection, 0 for a forced detection, or a positive
@@ -427,8 +489,8 @@ For now, you can ignore the `flags' parameter. It is there for future use.
}
-Removing the client
-===================
+Removing the client (Legacy model)
+==================================
The detach_client call back function is called when a client should be
removed. It may actually fail, but only when panicking. This code is