From 4298cfc3eb6110df989f784be516c6340c597a66 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 1 May 2007 23:26:31 +0200 Subject: i2c: i2c probe() and remove() documented Update Documentation/i2c to match previous patches updating probe() and remove() logic. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- Documentation/i2c/writing-clients | 82 ++++++++++++++++++++++++++++++++++----- 1 file changed, 72 insertions(+), 10 deletions(-) (limited to 'Documentation/i2c/writing-clients') diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index fbcff96f4ca1..54255fd68ec7 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -1,5 +1,5 @@ This is a small guide for those who want to write kernel drivers for I2C -or SMBus devices. +or SMBus devices, using Linux as the protocol host/master (not slave). To set up a driver, you need to do several things. Some are optional, and some things can be done slightly or completely different. Use this as a @@ -29,8 +29,16 @@ static struct i2c_driver foo_driver = { .driver = { .name = "foo", }, + + /* iff driver uses driver model ("new style") binding model: */ + .probe = foo_probe, + .remove = foo_remove, + + /* else, driver uses "legacy" binding model: */ .attach_adapter = foo_attach_adapter, .detach_client = foo_detach_client, + + /* these may be used regardless of the driver binding model */ .shutdown = foo_shutdown, /* optional */ .suspend = foo_suspend, /* optional */ .resume = foo_resume, /* optional */ @@ -40,7 +48,8 @@ static struct i2c_driver foo_driver = { The name field is the driver name, and must not contain spaces. It should match the module name (if the driver can be compiled as a module), although you can use MODULE_ALIAS (passing "foo" in this example) to add -another name for the module. +another name for the module. If the driver name doesn't match the module +name, the module won't be automatically loaded (hotplug/coldplug). All other fields are for call-back functions which will be explained below. @@ -141,6 +150,59 @@ Writing is done the same way. Probing and attaching ===================== +The Linux I2C stack was originally written to support access to hardware +monitoring chips on PC motherboards, and thus it embeds some assumptions +that are more appropriate to SMBus (and PCs) than to I2C. One of these +assumptions is that most adapters and devices drivers support the SMBUS_QUICK +protocol to probe device presence. Another is that devices and their drivers +can be sufficiently configured using only such probe primitives. + +As Linux and its I2C stack became more widely used in embedded systems +and complex components such as DVB adapters, those assumptions became more +problematic. Drivers for I2C devices that issue interrupts need more (and +different) configuration information, as do drivers handling chip variants +that can't be distinguished by protocol probing, or which need some board +specific information to operate correctly. + +Accordingly, the I2C stack now has two models for associating I2C devices +with their drivers: the original "legacy" model, and a newer one that's +fully compatible with the Linux 2.6 driver model. These models do not mix, +since the "legacy" model requires drivers to create "i2c_client" device +objects after SMBus style probing, while the Linux driver model expects +drivers to be given such device objects in their probe() routines. + + +Standard Driver Model Binding ("New Style") +------------------------------------------- + +System infrastructure, typically board-specific initialization code or +boot firmware, reports what I2C devices exist. For example, there may be +a table, in the kernel or from the boot loader, identifying I2C devices +and linking them to board-specific configuration information about IRQs +and other wiring artifacts, chip type, and so on. That could be used to +create i2c_client objects for each I2C device. + +I2C device drivers using this binding model work just like any other +kind of driver in Linux: they provide a probe() method to bind to +those devices, and a remove() method to unbind. + + static int foo_probe(struct i2c_client *client); + static int foo_remove(struct i2c_client *client); + +Remember that the i2c_driver does not create those client handles. The +handle may be used during foo_probe(). If foo_probe() reports success +(zero not a negative status code) it may save the handle and use it until +foo_remove() returns. That binding model is used by most Linux drivers. + +Drivers match devices when i2c_client.driver_name and the driver name are +the same; this approach is used in several other busses that don't have +device typing support in the hardware. The driver and module name should +match, so hotplug/coldplug mechanisms will modprobe the driver. + + +Legacy Driver Binding Model +--------------------------- + Most i2c devices can be present on several i2c addresses; for some this is determined in hardware (by soldering some chip pins to Vcc or Ground), for others this can be changed in software (by writing to specific client @@ -162,8 +224,8 @@ NOTE: If you want to write a `sensors' driver, the interface is slightly -Probing classes ---------------- +Probing classes (Legacy model) +------------------------------ All parameters are given as lists of unsigned 16-bit integers. Lists are terminated by I2C_CLIENT_END. @@ -210,8 +272,8 @@ Note that you *have* to call the defined variable `normal_i2c', without any prefix! -Attaching to an adapter ------------------------ +Attaching to an adapter (Legacy model) +-------------------------------------- Whenever a new adapter is inserted, or for all adapters if the driver is being registered, the callback attach_adapter() is called. Now is the @@ -237,8 +299,8 @@ them (unless a `force' parameter was used). In addition, addresses that are already in use (by some other registered client) are skipped. -The detect client function --------------------------- +The detect client function (Legacy model) +----------------------------------------- The detect client function is called by i2c_probe. The `kind' parameter contains -1 for a probed detection, 0 for a forced detection, or a positive @@ -427,8 +489,8 @@ For now, you can ignore the `flags' parameter. It is there for future use. } -Removing the client -=================== +Removing the client (Legacy model) +================================== The detach_client call back function is called when a client should be removed. It may actually fail, but only when panicking. This code is -- cgit v1.2.3