summaryrefslogtreecommitdiffstats
path: root/Documentation/gpio
diff options
context:
space:
mode:
authorPavel Machek <pavel@ucw.cz>2016-10-03 10:43:46 +0200
committerLinus Walleij <linus.walleij@linaro.org>2016-10-20 14:14:11 +0200
commit15e2a357876910623953a7c9b071096e6d976ca9 (patch)
treeffea45cea482c0bd15fe78066ca803a341d0f064 /Documentation/gpio
parent1001354ca34179f3db924eb66672442a173147dc (diff)
downloadlinux-15e2a357876910623953a7c9b071096e6d976ca9.tar.bz2
gpio/board.txt: point to gpiod_set_value
gpiod_set_value() is preffered interface these days, so add a pointer. Also fix a missing ). Signed-off-by: Pavel Machek <pavel@ucw.cz> [Fixed some grammar and reworded] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation/gpio')
-rw-r--r--Documentation/gpio/board.txt11
1 files changed, 7 insertions, 4 deletions
diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt
index 40884c4fe40c..a0f61898d493 100644
--- a/Documentation/gpio/board.txt
+++ b/Documentation/gpio/board.txt
@@ -6,7 +6,7 @@ Note that it only applies to the new descriptor-based interface. For a
description of the deprecated integer-based GPIO interface please refer to
gpio-legacy.txt (actually, there is no real mapping possible with the old
interface; you just fetch an integer from somewhere and request the
-corresponding GPIO.
+corresponding GPIO).
All platforms can enable the GPIO library, but if the platform strictly
requires GPIO functionality to be present, it needs to select GPIOLIB from its
@@ -162,6 +162,9 @@ The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
Since the "led" GPIOs are mapped as active-high, this example will switch their
signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped
-as active-low, its actual signal will be 0 after this code. Contrary to the legacy
-integer GPIO interface, the active-low property is handled during mapping and is
-thus transparent to GPIO consumers.
+as active-low, its actual signal will be 0 after this code. Contrary to the
+legacy integer GPIO interface, the active-low property is handled during
+mapping and is thus transparent to GPIO consumers.
+
+A set of functions such as gpiod_set_value() is available to work with
+the new descriptor-oriented interface.