diff options
author | Gregory Fong <gregory.0xf0@gmail.com> | 2015-05-28 19:14:05 -0700 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2015-06-02 15:36:22 +0200 |
commit | 3b0213d56eb7f78c9a0e78dfcd9ec077bb1cf4e9 (patch) | |
tree | b10d05e9b27b55e6952aac5da70f352040b78c3f /Documentation/gpio/consumer.txt | |
parent | 733cf014f02040b3ad5864f3fd73d50d49c84b49 (diff) | |
download | linux-3b0213d56eb7f78c9a0e78dfcd9ec077bb1cf4e9.tar.bz2 |
gpio: Add GPIO support for Broadcom STB SoCs
This adds support for the GPIO IP "UPG GIO" used on
Broadcom STB SoCs (BCM7XXX and some others). Uses
basic_mmio_gpio to instantiate a gpio_chip for each bank.
The driver assumes that it handles the base set of GPIOs
on the system and that it can start its numbering sequence
from 0, so any GPIO expanders used with it must dynamically
assign GPIO numbers after this driver has finished
registering its GPIOs.
Does not implement the interrupt-controller portion yet,
will be done in a future commit.
v2:
- change include to use <linux/gpio/driver.h> instead of
<linux/gpio.h>
- get rid of unnecessary imask member in struct bank
- rename GPIO_PER_BANK -> MAX_GPIO_PER_BANK
- always have 32 GPIOs per bank and add 'width' member in
struct bank to hold actual number of GPIOs in use
- mark of_match table as const
List-usage-fixed-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation/gpio/consumer.txt')
0 files changed, 0 insertions, 0 deletions