Merge branch 'regulator-5.5' into regulator-next

6 files changed, 64 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index edca653a5777..bc4b59de6a55 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -66,6 +66,9 @@ Sub-nodes:
   details of individual regulator device can be found in:
   Documentation/devicetree/bindings/regulator/regulator.txt
 
+  regulator-initial-mode may be specified for buck regulators using mode values
+  from include/dt-bindings/regulator/dlg,da9063-regulator.h.
+
 - rtc : This node defines settings required for the Real-Time Clock associated
   with the DA9062. There are currently no entries in this binding, however
   compatible = "dlg,da9062-rtc" should be added if a node is created.
@@ -96,6 +99,7 @@ Example:
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp = <500000>;
 				regulator-max-microamp = <2000000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-boot-on;
 			};
 			DA9062_LDO1: ldo1 {
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index f32416968197..59b4b73d4051 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -50,6 +50,10 @@ properties:
     description: startup time in microseconds
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  off-on-delay-us:
+    description: off delay time in microseconds
+    $ref: /schemas/types.yaml#/definitions/uint32
+
   enable-active-high:
     description:
       Polarity of GPIO is Active high. If this property is missing,
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
index bab9f71140b8..97c3e0b7611c 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
@@ -28,6 +28,8 @@ Supported regulator node names:
 	PM8150L:	smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
 	PM8998:		smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
 	PMI8998:	bob
+	PM6150:         smps1 - smps5, ldo1 - ldo19
+	PM6150L:        smps1 - smps8, ldo1 - ldo11, bob
 
 ========================
 First Level Nodes - PMIC
@@ -43,6 +45,8 @@ First Level Nodes - PMIC
 		    "qcom,pm8150l-rpmh-regulators"
 		    "qcom,pm8998-rpmh-regulators"
 		    "qcom,pmi8998-rpmh-regulators"
+		    "qcom,pm6150-rpmh-regulators"
+		    "qcom,pm6150l-rpmh-regulators"
 
 - qcom,pmic-id
 	Usage:      required
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
index 45025b5b67f6..d126df043403 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
@@ -22,6 +22,7 @@ Regulator nodes are identified by their compatible:
 		    "qcom,rpm-pm8841-regulators"
 		    "qcom,rpm-pm8916-regulators"
 		    "qcom,rpm-pm8941-regulators"
+		    "qcom,rpm-pm8950-regulators"
 		    "qcom,rpm-pm8994-regulators"
 		    "qcom,rpm-pm8998-regulators"
 		    "qcom,rpm-pma8084-regulators"
@@ -57,6 +58,26 @@ Regulator nodes are identified by their compatible:
 - vdd_s1-supply:
 - vdd_s2-supply:
 - vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_l1_l19-supply:
+- vdd_l2_l23-supply:
+- vdd_l3-supply:
+- vdd_l4_l5_l6_l7_l16-supply:
+- vdd_l8_l11_l12_l17_l22-supply:
+- vdd_l9_l10_l13_l14_l15_l18-supply:
+- vdd_l20-supply:
+- vdd_l21-supply:
+	Usage: optional (pm8950 only)
+	Value type: <phandle>
+	Definition: reference to regulator supplying the input pin, as
+		    described in the data sheet
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
 - vdd_l1_l3-supply:
 - vdd_l2_lvs1_2_3-supply:
 - vdd_l4_l11-supply:
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
index 430b8622bda1..f5cdac8b2847 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -4,10 +4,12 @@ Qualcomm SPMI Regulators
 	Usage: required
 	Value type: <string>
 	Definition: must be one of:
+			"qcom,pm8004-regulators"
 			"qcom,pm8005-regulators"
 			"qcom,pm8841-regulators"
 			"qcom,pm8916-regulators"
 			"qcom,pm8941-regulators"
+			"qcom,pm8950-regulators"
 			"qcom,pm8994-regulators"
 			"qcom,pmi8994-regulators"
 			"qcom,pms405-regulators"
@@ -76,6 +78,26 @@ Qualcomm SPMI Regulators
 - vdd_s2-supply:
 - vdd_s3-supply:
 - vdd_s4-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_l1_l19-supply:
+- vdd_l2_l23-supply:
+- vdd_l3-supply:
+- vdd_l4_l5_l6_l7_l16-supply:
+- vdd_l8_l11_l12_l17_l22-supply:
+- vdd_l9_l10_l13_l14_l15_l18-supply:
+- vdd_l20-supply:
+- vdd_l21-supply:
+	Usage: optional (pm8950 only)
+	Value type: <phandle>
+	Definition: reference to regulator supplying the input pin, as
+		    described in the data sheet
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
 - vdd_s5-supply:
 - vdd_s6-supply:
 - vdd_s7-supply:
@@ -140,6 +162,9 @@ sub-node is identified using the node's name, with valid values listed for each
 of the PMICs below.
 
 pm8005:
+	s2, s5
+
+pm8005:
 	s1, s2, s3, s4
 
 pm8841:
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index 02c3043ce419..92ff2e8ad572 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -38,7 +38,12 @@ properties:
     type: boolean
 
   regulator-boot-on:
-    description: bootloader/firmware enabled regulator
+    description: bootloader/firmware enabled regulator.
+      It's expected that this regulator was left on by the bootloader.
+      If the bootloader didn't leave it on then OS should turn it on
+      at boot but shouldn't prevent it from being turned off later.
+      This property is intended to only be used for regulators where
+      software cannot read the state of the regulator.
     type: boolean
 
   regulator-allow-bypass: