diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-12-08 13:00:51 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-12-08 13:00:51 -0800 |
commit | 78d9b048446c3c0a83313444fb706f8f3bccdae7 (patch) | |
tree | c16762f759b518b923e068c8c59fb9f431d43218 /Documentation/devicetree | |
parent | 900add27f55660158e7cac07674882befec49297 (diff) | |
parent | 589b754df3f37ca0a1f96fccde7f91c59266f38a (diff) | |
download | linux-78d9b048446c3c0a83313444fb706f8f3bccdae7.tar.bz2 |
Merge tag 'devicetree-fixes-for-4.15-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
"Another set of DT fixes:
- Fixes from overlay code rework. A trifecta of fixes to the locking,
an out of bounds access, and a memory leak in of_overlay_apply()
- Clean-up at25 eeprom binding document
- Remove leading '0x' in unit-addresses from binding docs"
* tag 'devicetree-fixes-for-4.15-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: overlay: Make node skipping in init_overlay_changeset() clearer
of: overlay: Fix out-of-bounds write in init_overlay_changeset()
of: overlay: Fix (un)locking in of_overlay_apply()
of: overlay: Fix memory leak in of_overlay_apply() error path
dt-bindings: eeprom: at25: Document device-specific compatible values
dt-bindings: eeprom: at25: Grammar s/are can/can/
dt-bindings: Remove leading 0x from bindings notation
of: overlay: Remove else after goto
of: Spelling s/changset/changeset/
of: unittest: Remove bogus overlay mutex release from overlay_data_add()
Diffstat (limited to 'Documentation/devicetree')
74 files changed, 108 insertions, 103 deletions
diff --git a/Documentation/devicetree/bindings/arm/ccn.txt b/Documentation/devicetree/bindings/arm/ccn.txt index 29801456c9ee..43b5a71a5a9d 100644 --- a/Documentation/devicetree/bindings/arm/ccn.txt +++ b/Documentation/devicetree/bindings/arm/ccn.txt @@ -15,7 +15,7 @@ Required properties: Example: - ccn@0x2000000000 { + ccn@2000000000 { compatible = "arm,ccn-504"; reg = <0x20 0x00000000 0 0x1000000>; interrupts = <0 181 4>; diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt index bb5727ae004a..ecb360ed0e33 100644 --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -49,7 +49,7 @@ An interrupt consumer on an SoC using crossbar will use: interrupts = <GIC_SPI request_number interrupt_level> Example: - device_x@0x4a023000 { + device_x@4a023000 { /* Crossbar 8 used */ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; ... diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt index 866d93421eba..f9632bacbd04 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt @@ -8,7 +8,7 @@ Required properties: - interrupts : Should contain MC General interrupt. Example: - memory-controller@0x7000f000 { + memory-controller@7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt index fb40da303d25..aca94fe9416f 100644 --- a/Documentation/devicetree/bindings/clock/axi-clkgen.txt +++ b/Documentation/devicetree/bindings/clock/axi-clkgen.txt @@ -17,7 +17,7 @@ Optional properties: - clock-output-names : From common clock binding. Example: - clock@0xff000000 { + clock@ff000000 { compatible = "adi,axi-clkgen"; #clock-cells = <0>; reg = <0xff000000 0x1000>; diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt index 7a837d2182ac..4acfc8f641b6 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt @@ -23,7 +23,7 @@ Example: clocks = <&clk_osc>; }; - aux: aux@0x7e215004 { + aux: aux@7e215004 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; reg = <0x7e215000 0x8>; diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt index bc61c952cb0b..17bb11365354 100644 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -24,7 +24,7 @@ tree sources. Example 1: An example of a clock controller node is listed below. - clock: clock-controller@0x10030000 { + clock: clock-controller@10030000 { compatible = "samsung,exynos4210-clock"; reg = <0x10030000 0x20000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt index 536eacd1063f..aff266a12eeb 100644 --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@ -22,7 +22,7 @@ tree sources. Example 1: An example of a clock controller node is listed below. - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5250-clock"; reg = <0x10010000 0x30000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt index 4527de3ea205..c68b0d29b3d0 100644 --- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt @@ -30,7 +30,7 @@ Example 1: An example of a clock controller node is listed below. #clock-cells = <0>; }; - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5410-clock"; reg = <0x10010000 0x30000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt index d54f42cf0440..717a7b1531c7 100644 --- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt @@ -23,7 +23,7 @@ tree sources. Example 1: An example of a clock controller node is listed below. - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5420-clock"; reg = <0x10010000 0x30000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt index 5f7005f73058..c7d227c31e95 100644 --- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt @@ -21,7 +21,7 @@ tree sources. Example: An example of a clock controller node is listed below. - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5440-clock"; reg = <0x160000 0x10000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt index 3e6a81e99804..c35cb6c4af4d 100644 --- a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt +++ b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt @@ -14,7 +14,7 @@ Required properties: Example: -pllctrl: pll-controller@0x02310000 { +pllctrl: pll-controller@02310000 { compatible = "ti,keystone-pllctrl", "syscon"; reg = <0x02310000 0x200>; }; diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt index e85ecb510d56..5c91c9e4f1be 100644 --- a/Documentation/devicetree/bindings/clock/zx296702-clk.txt +++ b/Documentation/devicetree/bindings/clock/zx296702-clk.txt @@ -20,13 +20,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h for the full list of zx296702 clock IDs. -topclk: topcrm@0x09800000 { +topclk: topcrm@09800000 { compatible = "zte,zx296702-topcrm-clk"; reg = <0x09800000 0x1000>; #clock-cells = <1>; }; -uart0: serial@0x09405000 { +uart0: serial@09405000 { compatible = "zte,zx296702-uart"; reg = <0x09405000 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index 7aef0eae58d4..76aec8a3724d 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -456,7 +456,7 @@ System ON/OFF key driver Definition: this is phandle to the register map node. EXAMPLE: - snvs-pwrkey@0x020cc000 { + snvs-pwrkey@020cc000 { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = <0 4 0x4> @@ -545,7 +545,7 @@ FULL EXAMPLE interrupts = <93 2>; }; - snvs-pwrkey@0x020cc000 { + snvs-pwrkey@020cc000 { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&sec_mon>; interrupts = <0 4 0x4>; diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt index 001dd63979a9..148191b0fc15 100644 --- a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt +++ b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt @@ -9,7 +9,7 @@ Required properties: - clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon"; Example: - dfi: dfi@0xff630000 { + dfi: dfi@ff630000 { compatible = "rockchip,rk3399-dfi"; reg = <0x00 0xff630000 0x00 0x4000>; rockchip,pmu = <&pmugrf>; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt index 1a21202778ee..acb5a0132127 100644 --- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt +++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt @@ -27,7 +27,7 @@ Optional properties: Example: - fb0: fb@0x00500000 { + fb0: fb@00500000 { compatible = "atmel,at91sam9g45-lcdc"; reg = <0x00500000 0x1000>; interrupts = <23 3 0>; @@ -41,7 +41,7 @@ Example: Example for fixed framebuffer memory: - fb0: fb@0x00500000 { + fb0: fb@00500000 { compatible = "atmel,at91sam9263-lcdc"; reg = <0x00700000 0x1000 0x70000000 0x200000>; [...] diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt index 55492c264d17..b3408cc57be6 100644 --- a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt +++ b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt @@ -73,7 +73,7 @@ Hypervisor OS configuration: max-read-transactions = <31>; channel-reset-timeout-cycles = <0x500>; - hidma_24: dma-controller@0x5c050000 { + hidma_24: dma-controller@5c050000 { compatible = "qcom,hidma-1.0"; reg = <0 0x5c050000 0x0 0x1000>, <0 0x5c0b0000 0x0 0x1000>; @@ -85,7 +85,7 @@ Hypervisor OS configuration: Guest OS configuration: - hidma_24: dma-controller@0x5c050000 { + hidma_24: dma-controller@5c050000 { compatible = "qcom,hidma-1.0"; reg = <0 0x5c050000 0x0 0x1000>, <0 0x5c0b0000 0x0 0x1000>; diff --git a/Documentation/devicetree/bindings/dma/zxdma.txt b/Documentation/devicetree/bindings/dma/zxdma.txt index abec59f35fde..0ab80f69e566 100644 --- a/Documentation/devicetree/bindings/dma/zxdma.txt +++ b/Documentation/devicetree/bindings/dma/zxdma.txt @@ -13,7 +13,7 @@ Required properties: Example: Controller: - dma: dma-controller@0x09c00000{ + dma: dma-controller@09c00000{ compatible = "zte,zx296702-dma"; reg = <0x09c00000 0x1000>; clocks = <&topclk ZX296702_DMA_ACLK>; diff --git a/Documentation/devicetree/bindings/eeprom/at25.txt b/Documentation/devicetree/bindings/eeprom/at25.txt index 1d3447165c37..e823d90b802f 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.txt +++ b/Documentation/devicetree/bindings/eeprom/at25.txt @@ -1,7 +1,12 @@ EEPROMs (SPI) compatible with Atmel at25. Required properties: -- compatible : "atmel,at25". +- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25". + Example "<vendor>,<type>" values: + "microchip,25lc040" + "st,m95m02" + "st,m95256" + - reg : chip select number - spi-max-frequency : max spi frequency to use - pagesize : size of the eeprom page @@ -13,7 +18,7 @@ Optional properties: - spi-cpol : SPI inverse clock polarity, as per spi-bus bindings. - read-only : this parameter-less property disables writes to the eeprom -Obsolete legacy properties are can be used in place of "size", "pagesize", +Obsolete legacy properties can be used in place of "size", "pagesize", "address-width", and "read-only": - at25,byte-len : total eeprom size in bytes - at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h @@ -22,8 +27,8 @@ Obsolete legacy properties are can be used in place of "size", "pagesize", Additional compatible properties are also allowed. Example: - at25@0 { - compatible = "atmel,at25", "st,m95256"; + eeprom@0 { + compatible = "st,m95256", "atmel,at25"; reg = <0> spi-max-frequency = <5000000>; spi-cpha; diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt index 826a7208ca93..146e554b3c67 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-altera.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt @@ -30,7 +30,7 @@ Optional properties: Example: -gpio_altr: gpio@0xff200000 { +gpio_altr: gpio@ff200000 { compatible = "altr,pio-1.0"; reg = <0xff200000 0x10>; interrupts = <0 45 4>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt index 231e4cc4008c..d4a082acf92f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt @@ -18,7 +18,7 @@ Optional properties: Example / { - i2c4: i2c4@0x10054000 { + i2c4: i2c4@10054000 { compatible = "ingenic,jz4780-i2c"; reg = <0x10054000 0x1000>; diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt index 54e7e70bcea5..831dbee7a5c3 100644 --- a/Documentation/devicetree/bindings/iio/pressure/hp03.txt +++ b/Documentation/devicetree/bindings/iio/pressure/hp03.txt @@ -10,7 +10,7 @@ Required properties: Example: -hp03@0x77 { +hp03@77 { compatible = "hoperf,hp03"; reg = <0x77>; xclr-gpio = <&portc 0 0x0>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt index ca5a2c86480c..56d835242af2 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt @@ -15,7 +15,7 @@ Optional properties: Example: i2c@80110000 { - bu21013_tp@0x5c { + bu21013_tp@5c { compatible = "rohm,bu21013_tp"; reg = <0x5c>; touch-gpio = <&gpio2 20 0x4>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt index 560d8a727b8f..2f3244648646 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt @@ -155,7 +155,7 @@ Example: <0x0 0xe112f000 0 0x02000>, <0x0 0xe1140000 0 0x10000>, <0x0 0xe1160000 0 0x10000>; - v2m0: v2m@0x8000 { + v2m0: v2m@8000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x80000 0 0x1000>; @@ -163,7 +163,7 @@ Example: .... - v2mN: v2m@0x9000 { + v2mN: v2m@9000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x90000 0 0x1000>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt index 80994adab392..42431f44697f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt @@ -71,7 +71,7 @@ Example 2: * An interrupt generating device that is wired to a Meta external * trigger block. */ - uart1: uart@0x02004c00 { + uart1: uart@02004c00 { // Interrupt source '5' that is level-sensitive. // Note that there are only two cells as specified in the // interrupt parent's '#interrupt-cells' property. diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt index a69118550344..5dc2a55ad811 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt @@ -51,7 +51,7 @@ Example 1: /* * TZ1090 PDC block */ - pdc: pdc@0x02006000 { + pdc: pdc@02006000 { // This is an interrupt controller node. interrupt-controller; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt index 715a013ed4bd..2ab0ea39867b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt @@ -39,7 +39,7 @@ Example: The following is an example from the SPEAr320 SoC dtsi file. -shirq: interrupt-controller@0xb3000000 { +shirq: interrupt-controller@b3000000 { compatible = "st,spear320-shirq"; reg = <0xb3000000 0x1000>; interrupts = <28 29 30 1>; diff --git a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt index c2619797ce0c..49cfc8c337c4 100644 --- a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt +++ b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt @@ -14,7 +14,7 @@ Optional properties: depends on the interrupt controller parent. Example: - mbox_tx: mailbox@0x100 { + mbox_tx: mailbox@100 { compatible = "altr,mailbox-1.0"; reg = <0x100 0x8>; interrupt-parent = < &gic_0 >; @@ -22,7 +22,7 @@ Example: #mbox-cells = <1>; }; - mbox_rx: mailbox@0x200 { + mbox_rx: mailbox@200 { compatible = "altr,mailbox-1.0"; reg = <0x200 0x8>; interrupt-parent = < &gic_0 >; @@ -40,7 +40,7 @@ support only one channel).The equivalent "mbox-names" property value can be used to give a name to the communication channel to be used by the client user. Example: - mclient0: mclient0@0x400 { + mclient0: mclient0@400 { compatible = "client-1.0"; reg = <0x400 0x10>; mbox-names = "mbox-tx", "mbox-rx"; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt index 0f3ee81d92c2..9bcdf2087625 100644 --- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt @@ -15,7 +15,7 @@ Optional properties: - brcm,use-bcm-hdr: present if a BCM header precedes each frame. Example: - pdc0: iproc-pdc0@0x612c0000 { + pdc0: iproc-pdc0@612c0000 { compatible = "brcm,iproc-pdc-mbox"; reg = <0 0x612c0000 0 0x445>; /* PDC FS0 regs */ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt index 0d4fdaedc6f1..bc963a6d305a 100644 --- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt +++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt @@ -17,7 +17,7 @@ Optional properties: Example: -gsc_0: gsc@0x13e00000 { +gsc_0: gsc@13e00000 { compatible = "samsung,exynos5250-gsc"; reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt index 46c15c54175d..2a615d84a682 100644 --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt @@ -68,7 +68,7 @@ vcodec_dec: vcodec@16000000 { "vdec_bus_clk_src"; }; - vcodec_enc: vcodec@0x18002000 { + vcodec_enc: vcodec@18002000 { compatible = "mediatek,mt8173-vcodec-enc"; reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/ <0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/ diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt index 6e4ef8caf759..19357d0bbe65 100644 --- a/Documentation/devicetree/bindings/media/rcar_vin.txt +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt @@ -44,7 +44,7 @@ Device node example vin0 = &vin0; }; - vin0: vin@0xe6ef0000 { + vin0: vin@e6ef0000 { compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; clocks = <&mstp8_clks R8A7790_CLK_VIN0>; reg = <0 0xe6ef0000 0 0x1000>; diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt index e4e15d8d7521..48c599dacbdf 100644 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt @@ -138,7 +138,7 @@ Example: }; /* MIPI CSI-2 bus IF sensor */ - s5c73m3: sensor@0x1a { + s5c73m3: sensor@1a { compatible = "samsung,s5c73m3"; reg = <0x1a>; vddio-supply = <...>; diff --git a/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt index 1ce4e46bcbb7..17a8e81ca0cc 100644 --- a/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt +++ b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt @@ -8,7 +8,7 @@ Bindings, specific for the sh_mobile_ceu_camera.c driver: Example: -ceu0: ceu@0xfe910000 { +ceu0: ceu@fe910000 { compatible = "renesas,sh-mobile-ceu"; reg = <0xfe910000 0xa0>; interrupt-parent = <&intcs>; diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index 3994b0143dd1..258b8dfddf48 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -154,7 +154,7 @@ imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a 'port' node which may indicate that at any time only one of the following data pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. - ceu0: ceu@0xfe910000 { + ceu0: ceu@fe910000 { compatible = "renesas,sh-mobile-ceu"; reg = <0xfe910000 0xa0>; interrupts = <0x880>; @@ -193,9 +193,9 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. }; }; - i2c0: i2c@0xfff20000 { + i2c0: i2c@fff20000 { ... - ov772x_1: camera@0x21 { + ov772x_1: camera@21 { compatible = "ovti,ov772x"; reg = <0x21>; vddio-supply = <®ulator1>; @@ -219,7 +219,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. }; }; - imx074: camera@0x1a { + imx074: camera@1a { compatible = "sony,imx074"; reg = <0x1a>; vddio-supply = <®ulator1>; @@ -239,7 +239,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. }; }; - csi2: csi2@0xffc90000 { + csi2: csi2@ffc90000 { compatible = "renesas,sh-mobile-csi2"; reg = <0xffc90000 0x1000>; interrupts = <0x17a0>; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index fd823d6091b2..152eeccbde1c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -46,7 +46,7 @@ Optional properties: Example: -emif1: emif@0x4c000000 { +emif1: emif@4c000000 { compatible = "ti,emif-4d"; ti,hwmods = "emif2"; phy-type = <1>; diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt index 20963c76b4bc..71a1f5963936 100644 --- a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt +++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt @@ -13,7 +13,7 @@ Required properties: Example: -devctrl: device-state-control@0x02620000 { +devctrl: device-state-control@02620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt index 6c9f176f3571..05b47232ed9e 100644 --- a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt +++ b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt @@ -9,7 +9,7 @@ Required properties: - reg : Location and size of bounce buffer Example: - smc@0x3404c000 { + smc@3404c000 { compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; reg = <0x3404c000 0x400>; //1 KiB in SRAM }; diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt index aaba2483b4ff..7f5dd83f5bd9 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt @@ -12,7 +12,7 @@ Refer to clocks/clock-bindings.txt for generic clock consumer properties. Example: -sdio2: sdio@0x3f1a0000 { +sdio2: sdio@3f1a0000 { compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x10000>; clocks = <&sdio3_clk>; diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt index 954561d09a8e..fa90d253dc7e 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt @@ -24,7 +24,7 @@ Optional properties: Example: -sdhci0: sdhci@0x18041000 { +sdhci0: sdhci@18041000 { compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x18041000 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 3a4ac401e6f9..19f5508a7569 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -55,7 +55,7 @@ Examples: [hwmod populated DMA resources] - mmc1: mmc@0x4809c000 { + mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; ti,hwmods = "mmc1"; @@ -67,7 +67,7 @@ Examples: [generic DMA request binding] - mmc1: mmc@0x4809c000 { + mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; ti,hwmods = "mmc1"; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt index 131d3a74d0bd..c8567b40fe13 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt @@ -82,15 +82,15 @@ gpmc: gpmc@6e000000 { label = "bootloader-nor"; reg = <0 0x40000>; }; - partition@0x40000 { + partition@40000 { label = "params-nor"; reg = <0x40000 0x40000>; }; - partition@0x80000 { + partition@80000 { label = "kernel-nor"; reg = <0x80000 0x200000>; }; - partition@0x280000 { + partition@280000 { label = "filesystem-nor"; reg = <0x240000 0x7d80000>; }; diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt index dbf9e054c11c..0431841de781 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt @@ -131,7 +131,7 @@ Example: read-only; reg = <0x00000000 0x00400000>; }; - android@0x00400000 { + android@00400000 { label = "android"; reg = <0x00400000 0x12c00000>; }; diff --git a/Documentation/devicetree/bindings/net/altera_tse.txt b/Documentation/devicetree/bindings/net/altera_tse.txt index a706297998e9..0e21df94a53f 100644 --- a/Documentation/devicetree/bindings/net/altera_tse.txt +++ b/Documentation/devicetree/bindings/net/altera_tse.txt @@ -52,7 +52,7 @@ Optional properties: Example: - tse_sub_0_eth_tse_0: ethernet@0x1,00000000 { + tse_sub_0_eth_tse_0: ethernet@1,00000000 { compatible = "altr,tse-msgdma-1.0"; reg = <0x00000001 0x00000000 0x00000400>, <0x00000001 0x00000460 0x00000020>, @@ -90,7 +90,7 @@ Example: }; }; - tse_sub_1_eth_tse_0: ethernet@0x1,00001000 { + tse_sub_1_eth_tse_0: ethernet@1,00001000 { compatible = "altr,tse-msgdma-1.0"; reg = <0x00000001 0x00001000 0x00000400>, <0x00000001 0x00001460 0x00000020>, diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt index 96a53f89aa6e..e3e1603f256c 100644 --- a/Documentation/devicetree/bindings/net/mdio.txt +++ b/Documentation/devicetree/bindings/net/mdio.txt @@ -18,7 +18,7 @@ Example : This example shows these optional properties, plus other properties required for the TI Davinci MDIO driver. - davinci_mdio: ethernet@0x5c030000 { + davinci_mdio: ethernet@5c030000 { compatible = "ti,davinci_mdio"; reg = <0x5c030000 0x1000>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt index b30d04b54ee9..17d6819669c8 100644 --- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt +++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt @@ -28,7 +28,7 @@ Required properties: Example: -gmii_to_sgmii_converter: phy@0x100000240 { +gmii_to_sgmii_converter: phy@100000240 { compatible = "altr,gmii-to-sgmii-2.0"; reg = <0x00000001 0x00000240 0x00000008>, <0x00000001 0x00000200 0x00000040>; diff --git a/Documentation/devicetree/bindings/nios2/nios2.txt b/Documentation/devicetree/bindings/nios2/nios2.txt index d6d0a94cb3bb..b95e831bcba3 100644 --- a/Documentation/devicetree/bindings/nios2/nios2.txt +++ b/Documentation/devicetree/bindings/nios2/nios2.txt @@ -36,7 +36,7 @@ Optional properties: Example: -cpu@0x0 { +cpu@0 { device_type = "cpu"; compatible = "altr,nios2-1.0"; reg = <0>; diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt index 495880193adc..a1dc9366a8fc 100644 --- a/Documentation/devicetree/bindings/pci/altera-pcie.txt +++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt @@ -25,7 +25,7 @@ Optional properties: - bus-range: PCI bus numbers covered Example - pcie_0: pcie@0xc00000000 { + pcie_0: pcie@c00000000 { compatible = "altr,pcie-root-port-1.0"; reg = <0xc0000000 0x20000000>, <0xff220000 0x00004000>; diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index 7b1e48bf172b..149d8f7f86b0 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -52,7 +52,7 @@ Additional required properties for imx7d-pcie: Example: - pcie@0x01000000 { + pcie@01000000 { compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; reg = <0x01ffc000 0x04000>, <0x01f00000 0x80000>; diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index bdb7ab39d2d7..7bf9df047a1e 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -21,7 +21,7 @@ Optional properties: - dma-coherent: Present if DMA operations are coherent. Hip05 Example (note that Hip06 is the same except compatible): - pcie@0xb0080000 { + pcie@b0080000 { compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; reg-names = "rc_dbi", "config"; diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index cbc7847dbf6c..c1ce5a0a652e 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -45,7 +45,7 @@ Optional properties: - usb3_vbus-supply : regulator phandle for controller usb3 vbus Example: - usbphy: phy@0x01c13400 { + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; /* phy base regs, phy1 pmu reg, phy2 pmu reg */ diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt index 3600d5c6c4d7..3914529a3214 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt @@ -25,7 +25,7 @@ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt For example: - pinmux: pinmux@0x0301d0c8 { + pinmux: pinmux@0301d0c8 { compatible = "brcm,cygnus-pinmux"; reg = <0x0301d0c8 0x1b0>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt index eecf028ff485..bf9b07016c87 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt @@ -96,14 +96,14 @@ For example, pinctrl might have subnodes like the following: For a specific board, if it wants to use sd1, it can add the following to its board-specific .dts file. -sd1: sd@0x12340000 { +sd1: sd@12340000 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pmx0>; } or -sd1: sd@0x12340000 { +sd1: sd@12340000 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pmx1>; } diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt index 5f55be59d914..f8420520e14b 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt @@ -41,7 +41,7 @@ For example, pinctrl might have subnodes like the following: For a specific board, if it wants to use uart2 without hardware flow control, it can add the following to its board-specific .dts file. -uart2: uart@0xb0070000 { +uart2: uart@b0070000 { pinctrl-names = "default"; pinctrl-0 = <&uart2_noflow_pins_a>; } diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index 4864e3a74de3..a01a3b8a2363 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -136,7 +136,7 @@ Example for rk3188: #size-cells = <1>; ranges; - gpio0: gpio0@0x2000a000 { + gpio0: gpio0@2000a000 { compatible = "rockchip,rk3188-gpio-bank0"; reg = <0x2000a000 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; @@ -149,7 +149,7 @@ Example for rk3188: #interrupt-cells = <2>; }; - gpio1: gpio1@0x2003c000 { + gpio1: gpio1@2003c000 { compatible = "rockchip,gpio-bank"; reg = <0x2003c000 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 378f6dc8b8bd..3cbf56ce66ea 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -107,7 +107,7 @@ regulators (twl_reg1 and twl_reg2), ... }; - mmc: mmc@0x0 { + mmc: mmc@0 { ... ... vmmc-supply = <&twl_reg1>; diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt index 8adbab268ca3..4f8d8fde0c1c 100644 --- a/Documentation/devicetree/bindings/serial/efm32-uart.txt +++ b/Documentation/devicetree/bindings/serial/efm32-uart.txt @@ -12,7 +12,7 @@ Optional properties: Example: -uart@0x4000c400 { +uart@4000c400 { compatible = "energymicro,efm32-uart"; reg = <0x4000c400 0x400>; interrupts = <15>; diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt index f311472990a7..75996b6111bb 100644 --- a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt +++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt @@ -14,7 +14,7 @@ Required properties: Example: - ps20: ps2@0x01c2a000 { + ps20: ps2@01c2a000 { compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a000 0x400>; interrupts = <0 62 4>; diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt index 64c66a5644e7..77cd42cc5f54 100644 --- a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt +++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt @@ -220,7 +220,7 @@ qmss: qmss@2a40000 { #address-cells = <1>; #size-cells = <1>; ranges; - pdsp0@0x2a10000 { + pdsp0@2a10000 { reg = <0x2a10000 0x1000>, <0x2a0f000 0x100>, <0x2a0c000 0x3c8>, diff --git a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt index 5875ca459ed1..4248b662deff 100644 --- a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt +++ b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt @@ -21,7 +21,7 @@ please check: Example: - i2s: i2s@0x77600000 { + i2s: i2s@77600000 { compatible = "adi,axi-i2s-1.00.a"; reg = <0x77600000 0x1000>; clocks = <&clk 15>, <&audio_clock>; diff --git a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt index 4eb7997674a0..7b664e7cb4ae 100644 --- a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt +++ b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt @@ -20,7 +20,7 @@ please check: Example: - spdif: spdif@0x77400000 { + spdif: spdif@77400000 { compatible = "adi,axi-spdif-tx-1.00.a"; reg = <0x77600000 0x1000>; clocks = <&clk 15>, <&audio_clock>; diff --git a/Documentation/devicetree/bindings/sound/ak4613.txt b/Documentation/devicetree/bindings/sound/ak4613.txt index 1783f9ef0930..49a2e74fd9cb 100644 --- a/Documentation/devicetree/bindings/sound/ak4613.txt +++ b/Documentation/devicetree/bindings/sound/ak4613.txt @@ -20,7 +20,7 @@ Optional properties: Example: &i2c { - ak4613: ak4613@0x10 { + ak4613: ak4613@10 { compatible = "asahi-kasei,ak4613"; reg = <0x10>; }; diff --git a/Documentation/devicetree/bindings/sound/ak4642.txt b/Documentation/devicetree/bindings/sound/ak4642.txt index 340784db6808..58e48ee97175 100644 --- a/Documentation/devicetree/bindings/sound/ak4642.txt +++ b/Documentation/devicetree/bindings/sound/ak4642.txt @@ -17,7 +17,7 @@ Optional properties: Example 1: &i2c { - ak4648: ak4648@0x12 { + ak4648: ak4648@12 { compatible = "asahi-kasei,ak4642"; reg = <0x12>; }; diff --git a/Documentation/devicetree/bindings/sound/max98371.txt b/Documentation/devicetree/bindings/sound/max98371.txt index 6c285235e64b..8b2b2704b574 100644 --- a/Documentation/devicetree/bindings/sound/max98371.txt +++ b/Documentation/devicetree/bindings/sound/max98371.txt @@ -10,7 +10,7 @@ Required properties: Example: &i2c { - max98371: max98371@0x31 { + max98371: max98371@31 { compatible = "maxim,max98371"; reg = <0x31>; }; diff --git a/Documentation/devicetree/bindings/sound/max9867.txt b/Documentation/devicetree/bindings/sound/max9867.txt index 394cd4eb17ec..b8bd914ee697 100644 --- a/Documentation/devicetree/bindings/sound/max9867.txt +++ b/Documentation/devicetree/bindings/sound/max9867.txt @@ -10,7 +10,7 @@ Required properties: Example: &i2c { - max9867: max9867@0x18 { + max9867: max9867@18 { compatible = "maxim,max9867"; reg = <0x18>; }; diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.txt b/Documentation/devicetree/bindings/sound/renesas,fsi.txt index 0d0ab51105b0..0cf0f819b823 100644 --- a/Documentation/devicetree/bindings/sound/renesas,fsi.txt +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.txt @@ -20,7 +20,7 @@ Required properties: Example: -sh_fsi2: sh_fsi2@0xec230000 { +sh_fsi2: sh_fsi2@ec230000 { compatible = "renesas,sh_fsi2"; reg = <0xec230000 0x400>; interrupts = <0 146 0x4>; diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt index 0a1dc4e1815c..ec20c1271e92 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt @@ -33,7 +33,7 @@ Required properties on RK3288: Example for the rk3188 SPDIF controller: -spdif: spdif@0x1011e000 { +spdif: spdif@1011e000 { compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; reg = <0x1011e000 0x2000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt index 40068ec0e9a5..9c1ee52fed5b 100644 --- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -51,7 +51,7 @@ Optional properties: Example: - sti_uni_player1: sti-uni-player@0x8D81000 { + sti_uni_player1: sti-uni-player@8D81000 { compatible = "st,stih407-uni-player-hdmi"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; @@ -63,7 +63,7 @@ Example: st,tdm-mode = <1>; }; - sti_uni_player2: sti-uni-player@0x8D82000 { + sti_uni_player2: sti-uni-player@8D82000 { compatible = "st,stih407-uni-player-pcm-out"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; @@ -74,7 +74,7 @@ Example: dma-names = "tx"; }; - sti_uni_player3: sti-uni-player@0x8D85000 { + sti_uni_player3: sti-uni-player@8D85000 { compatible = "st,stih407-uni-player-spdif"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; @@ -85,7 +85,7 @@ Example: dma-names = "tx"; }; - sti_uni_reader1: sti-uni-reader@0x8D84000 { + sti_uni_reader1: sti-uni-reader@8D84000 { compatible = "st,stih407-uni-reader-hdmi"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt index 2c1e6a43930b..e0fa61a1be0c 100644 --- a/Documentation/devicetree/bindings/spi/efm32-spi.txt +++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt @@ -19,7 +19,7 @@ Recommended properties : Example: -spi1: spi@0x4000c400 { /* USART1 */ +spi1: spi@4000c400 { /* USART1 */ #address-cells = <1>; #size-cells = <0>; compatible = "energymicro,efm32-spi"; diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt index 88b6ea1ad290..44d7cb2cb2c0 100644 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -239,7 +239,7 @@ cpus { * A simple fan controller which supports 10 speeds of operation * (represented as 0-9). */ - fan0: fan@0x48 { + fan0: fan@48 { ... cooling-min-level = <0>; cooling-max-level = <9>; @@ -252,7 +252,7 @@ ocp { /* * A simple IC with a single bandgap temperature sensor. */ - bandgap0: bandgap@0x0000ED00 { + bandgap0: bandgap@0000ED00 { ... #thermal-sensor-cells = <0>; }; @@ -330,7 +330,7 @@ ocp { /* * A simple IC with several bandgap temperature sensors. */ - bandgap0: bandgap@0x0000ED00 { + bandgap0: bandgap@0000ED00 { ... #thermal-sensor-cells = <1>; }; @@ -447,7 +447,7 @@ one thermal zone. /* * A simple IC with a single temperature sensor. */ - adc: sensor@0x49 { + adc: sensor@49 { ... #thermal-sensor-cells = <0>; }; @@ -458,7 +458,7 @@ ocp { /* * A simple IC with a single bandgap temperature sensor. */ - bandgap0: bandgap@0x0000ED00 { + bandgap0: bandgap@0000ED00 { ... #thermal-sensor-cells = <0>; }; @@ -516,7 +516,7 @@ with many sensors and many cooling devices. /* * An IC with several temperature sensor. */ - adc_dummy: sensor@0x50 { + adc_dummy: sensor@50 { ... #thermal-sensor-cells = <1>; /* sensor internal ID */ }; diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt index 1f69ee1a61ea..21d9a93db2e9 100644 --- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt +++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt @@ -32,7 +32,7 @@ Optional properties: Example: - ufsphy1: ufsphy@0xfc597000 { + ufsphy1: ufsphy@fc597000 { compatible = "qcom,ufs-phy-qmp-20nm"; reg = <0xfc597000 0x800>; reg-names = "phy_mem"; @@ -53,7 +53,7 @@ Example: <&clock_gcc clk_gcc_ufs_rx_cfg_clk>; }; - ufshc@0xfc598000 { + ufshc@fc598000 { ... phys = <&ufsphy1>; phy-names = "ufsphy"; diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index a99ed5565b26..c39dfef76a18 100644 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt @@ -46,7 +46,7 @@ Note: If above properties are not defined it can be assumed that the supply regulators or clocks are always on. Example: - ufshc@0xfc598000 { + ufshc@fc598000 { compatible = "jedec,ufs-1.1"; reg = <0xfc598000 0x800>; interrupts = <0 28 0>; diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt index 9feea6c3e4d9..065c91d955ad 100644 --- a/Documentation/devicetree/bindings/usb/ehci-st.txt +++ b/Documentation/devicetree/bindings/usb/ehci-st.txt @@ -22,7 +22,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt Example: - ehci1: usb@0xfe203e00 { + ehci1: usb@fe203e00 { compatible = "st,st-ehci-300x"; reg = <0xfe203e00 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt index d893ec9131c3..44c998c16f85 100644 --- a/Documentation/devicetree/bindings/usb/ohci-st.txt +++ b/Documentation/devicetree/bindings/usb/ohci-st.txt @@ -20,7 +20,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt Example: - ohci0: usb@0xfe1ffc00 { + ohci0: usb@fe1ffc00 { compatible = "st,st-ohci-300x"; reg = <0xfe1ffc00 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt b/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt index e27763ef0049..3c7a1cd13b10 100644 --- a/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt @@ -6,7 +6,7 @@ reg: Register address and length for watchdog registers Example: -watchdog: jz4740-watchdog@0x10002000 { +watchdog: jz4740-watchdog@10002000 { compatible = "ingenic,jz4740-watchdog"; reg = <0x10002000 0x100>; }; |