Merge tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / iio updates from Greg KH:
 "Here is the big staging and iio set of patches for the 5.5-rc1
  release.

  It's the usual huge collection of cleanup patches all over the
  drivers/staging/ area, along with a new staging driver, and a bunch of
  new IIO drivers as well.

  Full details are in the shortlog, but all of these have been in
  linux-next for a long time with no reported issues"

* tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (548 commits)
  staging: vchiq: Have vchiq_dump_* functions return an error code
  staging: vchiq: Refactor indentation in vchiq_dump_* functions
  staging: fwserial: Fix Kconfig indentation (seven spaces)
  staging: vchiq_dump: Replace min with min_t
  staging: vchiq: Fix block comment format in vchiq_dump()
  staging: octeon: indent with tabs instead of spaces
  staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error
  staging: most: core: remove sysfs attr remove_link
  staging: vc04: Fix Kconfig indentation
  staging: pi433: Fix Kconfig indentation
  staging: nvec: Fix Kconfig indentation
  staging: most: Fix Kconfig indentation
  staging: fwserial: Fix Kconfig indentation
  staging: fbtft: Fix Kconfig indentation
  fbtft: Drop OF dependency
  fbtft: Make use of device property API
  fbtft: Drop useless #ifdef CONFIG_OF and dead code
  fbtft: Describe function parameters in kernel-doc
  fbtft: Make sure string is NULL terminated
  staging: rtl8723bs: remove set but not used variable 'change', 'pos'
  ...

21 files changed, 1066 insertions, 118 deletions

diff --git a/Documentation/devicetree/bindings/counter/ti-eqep.yaml b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
new file mode 100644
index 000000000000..85f1ff83afe7
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti-eqep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) Module
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+properties:
+  compatible:
+    const: ti,am3352-eqep
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: The eQEP event interrupt
+    maxItems: 1
+
+  clocks:
+    description: The clock that determines the SYSCLKOUT rate for the eQEP
+      peripheral.
+    maxItems: 1
+
+  clock-names:
+    const: sysclkout
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    eqep0: counter@180 {
+        compatible = "ti,am3352-eqep";
+        reg = <0x180 0x80>;
+        clocks = <&l4ls_gclk>;
+        clock-names = "sysclkout";
+        interrupts = <79>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
new file mode 100644
index 000000000000..b68be3aaf587
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7292 10-Bit Monitor and Control System
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt1@gmail.com>
+
+description: |
+  Analog Devices AD7292 10-Bit Monitor and Control System with ADC, DACs,
+  Temperature Sensor, and GPIOs
+
+  Specifications about the part can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7292.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7292
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: |
+      The regulator supply for ADC and DAC reference voltage.
+
+  spi-cpha: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+
+patternProperties:
+  "^channel@[0-7]$":
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+      See Documentation/devicetree/bindings/iio/adc/adc.txt.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 8 channels numbered from 0 to 7.
+        items:
+          maximum: 7
+
+      diff-channels:
+        description: see Documentation/devicetree/bindings/iio/adc/adc.txt
+        maxItems: 1
+
+    required:
+      - reg
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7292: adc@0 {
+        compatible = "adi,ad7292";
+        reg = <0>;
+        spi-max-frequency = <25000000>;
+        vref-supply = <&adc_vref>;
+        spi-cpha;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+          diff-channels = <0 1>;
+        };
+        channel@2 {
+          reg = <2>;
+        };
+        channel@3 {
+          reg = <3>;
+        };
+        channel@4 {
+          reg = <4>;
+        };
+        channel@5 {
+          reg = <5>;
+        };
+        channel@6 {
+          reg = <6>;
+        };
+        channel@7 {
+          reg = <7>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
index f01159f20d87..cd9048cf9dcf 100644
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
@@ -5,6 +5,7 @@ Required properties:
 - compatible: Should be one of:
   * ingenic,jz4725b-adc
   * ingenic,jz4740-adc
+  * ingenic,jz4770-adc
 - reg: ADC controller registers location and length.
 - clocks: phandle to the SoC's ADC clock.
 - clock-names: Must be set to "adc".
diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
deleted file mode 100644
index e680c61dfb84..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Maxim 1027/1029/1031 Analog to Digital Converter (ADC)
-
-Required properties:
-  - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031"
-  - reg: SPI chip select number for the device
-  - interrupts: IRQ line for the ADC
-  see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Recommended properties:
-- spi-max-frequency: Definition as per
-                     Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-adc@0 {
-	compatible = "maxim,max1027";
-	reg = <0>;
-	interrupt-parent = <&gpio5>;
-	interrupts = <15 IRQ_TYPE_EDGE_RISING>;
-	spi-max-frequency = <1000000>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
deleted file mode 100644
index 3071f48fb30b..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Microchip MCP3911 Dual channel analog front end (ADC)
-
-Required properties:
- - compatible: Should be "microchip,mcp3911"
- - reg: SPI chip select number for the device
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-	 Documentation/devicetree/bindings/spi/spi-bus.txt.
-	 Max frequency for this chip is 20MHz.
-
-Optional properties:
- - clocks: Phandle and clock identifier for sampling clock
- - interrupt-parent: Phandle to the parent interrupt controller
- - interrupts: IRQ line for the ADC
- - microchip,device-addr: Device address when multiple MCP3911 chips are present on the
-	same SPI bus. Valid values are 0-3. Defaults to 0.
- - vref-supply: Phandle to the external reference voltage supply.
-
-Example:
-adc@0 {
-	compatible = "microchip,mcp3911";
-	reg = <0>;
-	interrupt-parent = <&gpio5>;
-	interrupts = <15 IRQ_TYPE_EDGE_RISING>;
-	spi-max-frequency = <20000000>;
-	microchip,device-addr = <0>;
-	vref-supply = <&vref_reg>;
-	clocks = <&xtal>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
new file mode 100644
index 000000000000..881059b80d61
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/bindings/iio/adc/microchip,mcp3911.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microchip MCP3911 Dual channel analog front end (ADC)
+
+maintainers:
+  - Marcus Folkesson <marcus.folkesson@gmail.com>
+  - Kent Gustavsson <nedo80@gmail.com>
+
+description: |
+  Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be
+  found here: https://ww1.microchip.com/downloads/en/DeviceDoc/20002286C.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3911
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  clocks:
+    description: |
+      Phandle and clock identifier for external sampling clock.
+      If not specified, the internal crystal oscillator will be used.
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line of the ADC
+    maxItems: 1
+
+  microchip,device-addr:
+    description: Device address when multiple MCP3911 chips are present on the same SPI bus.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 2, 3]
+      - default: 0
+
+  vref-supply:
+    description: |
+      Phandle to the external reference voltage supply.
+      If not specified, the internal voltage reference (1.2V) will be used.
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "microchip,mcp3911";
+        reg = <0>;
+        interrupt-parent = <&gpio5>;
+        interrupts = <15 2>;
+        spi-max-frequency = <20000000>;
+        microchip,device-addr = <0>;
+        vref-supply = <&vref_reg>;
+        clocks = <&xtal>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index 4c0da8c74bb2..8de933146771 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -53,6 +53,8 @@ Optional properties:
   analog input switches on stm32mp1.
 - st,syscfg: Phandle to system configuration controller. It can be used to
   control the analog circuitry on stm32mp1.
+- st,max-clk-rate-hz: Allow to specify desired max clock rate used by analog
+  circuitry.
 
 Contents of a stm32 adc child node:
 -----------------------------------
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
new file mode 100644
index 000000000000..13d005b68931
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/bindings/iio/dac/lltc,ltc1660.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs
+
+maintainers:
+  - Marcus Folkesson <marcus.folkesson@gmail.com>
+
+description: |
+  Bindings for the Linear Technology Micropower octal 8-Bit and 10-Bit DAC.
+  Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/166560fa.pdf
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc1660
+      - lltc,ltc1665
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  vref-supply:
+    description: Phandle to the external reference voltage supply.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+  
+      dac@0 {
+        compatible = "lltc,ltc1660";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        vref-supply = <&vref_reg>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/dac/ltc1660.txt b/Documentation/devicetree/bindings/iio/dac/ltc1660.txt
deleted file mode 100644
index c5b5f22d6c64..000000000000
--- a/Documentation/devicetree/bindings/iio/dac/ltc1660.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Linear Technology Micropower octal 8-Bit and 10-Bit DACs
-
-Required properties:
- - compatible: Must be one of the following:
-		"lltc,ltc1660"
-		"lltc,ltc1665"
- - reg: SPI chip select number for the device
- - vref-supply: Phandle to the voltage reference supply
-
-Recommended properties:
- - spi-max-frequency: Definition as per
-	 Documentation/devicetree/bindings/spi/spi-bus.txt.
-	 Max frequency for this chip is 5 MHz.
-
-Example:
-dac@0 {
-	compatible = "lltc,ltc1660";
-	reg = <0>;
-	spi-max-frequency = <5000000>;
-	vref-supply = <&vref_reg>;
-};
diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
index 68d6f8ce063b..af33267727f4 100644
--- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
+++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
@@ -18,12 +18,17 @@ Required properties:
 		   with a single IIO output and 1 for nodes with multiple
 		   IIO outputs.
 
+Optional properties:
+label:		   A symbolic name for the device.
+
+
 Example for a simple configuration with no trigger:
 
 	adc: voltage-sensor@35 {
 		compatible = "maxim,max1139";
 		reg = <0x35>;
 		#io-channel-cells = <1>;
+		label = "voltage_feedback_group1";
 	};
 
 Example for a configuration with trigger:
diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
index 268bf7568e19..c5ee8a20af9f 100644
--- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
+++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
@@ -21,6 +21,7 @@ Required properties:
   bindings.
 
 Optional properties:
+ - vdd-supply: regulator phandle for VDD supply
  - vddio-supply: regulator phandle for VDDIO supply
  - mount-matrix: an optional 3x3 mounting rotation matrix
  - i2c-gate node.  These devices also support an auxiliary i2c bus.  This is
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
new file mode 100644
index 000000000000..63bcb73ae309
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/nxp,fxos8700.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale FXOS8700 Inertial Measurement Unit
+
+maintainers:
+  - Robert Jones <rjones@gateworks.com>
+
+description: |
+  Accelerometer and magnetometer combo device with an i2c and SPI interface.
+  https://www.nxp.com/products/sensors/motion-sensors/6-axis/digital-motion-sensor-3d-accelerometer-2g-4g-8g-plus-3d-magnetometer:FXOS8700CQ
+
+properties:
+  compatible:
+    enum:
+      - nxp,fxos8700
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fxos8700@1e {
+          compatible = "nxp,fxos8700";
+          reg = <0x1e>;
+
+          interrupt-parent = <&gpio2>;
+          interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+          interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fxos8700@0 {
+          compatible = "nxp,fxos8700";
+          reg = <0>;
+
+          spi-max-frequency = <1000000>;
+          interrupt-parent = <&gpio1>;
+          interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+          interrupt-names = "INT2";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
index 6d0c050d89fe..cef4bc16fce1 100644
--- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -14,6 +14,8 @@ Required properties:
   "st,lsm6ds3tr-c"
   "st,ism330dhcx"
   "st,lsm9ds1-imu"
+  "st,lsm6ds0"
+  "st,lsm6dsrx"
 - reg: i2c address of the sensor / spi cs line
 
 Optional properties:
@@ -31,6 +33,7 @@ Optional properties:
 - interrupts: interrupt mapping for IRQ. It should be configured with
   flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
   IRQ_TYPE_EDGE_FALLING.
+- wakeup-source: Enables wake up of host system on event.
 
   Refer to interrupt-controller/interrupts.txt for generic interrupt
   client node bindings.
diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
new file mode 100644
index 000000000000..69bd5c06319d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/adux1020.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADUX1020 Photometric sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  Photometric sensor over an i2c interface.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adux1020
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adux1020@64 {
+                compatible = "adi,adux1020";
+                reg = <0x64>;
+                interrupt-parent = <&msmgpio>;
+                interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.txt b/Documentation/devicetree/bindings/iio/light/bh1750.txt
deleted file mode 100644
index 1e7685797d7a..000000000000
--- a/Documentation/devicetree/bindings/iio/light/bh1750.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-ROHM BH1750 - ALS, Ambient light sensor
-
-Required properties:
-
-- compatible: Must be one of:
-    "rohm,bh1710"
-    "rohm,bh1715"
-    "rohm,bh1721"
-    "rohm,bh1750"
-    "rohm,bh1751"
-- reg: the I2C address of the sensor
-
-Example:
-
-light-sensor@23 {
-	compatible = "rohm,bh1750";
-	reg = <0x23>;
-};
diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
new file mode 100644
index 000000000000..1cc60d7ecfa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/bh1750.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BH1750 ambient light sensor
+
+maintainers:
+  - Tomasz Duszynski <tduszyns@gmail.com>
+
+description: |
+  Ambient light sensor with an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - rohm,bh1710
+      - rohm,bh1715
+      - rohm,bh1721
+      - rohm,bh1750
+      - rohm,bh1751
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@23 {
+        compatible = "rohm,bh1750";
+        reg = <0x23>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
new file mode 100644
index 000000000000..0ff9b11f9d18
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/veml6030.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VEML6030 Ambient Light Sensor (ALS)
+
+maintainers:
+  - Rishi Gupta <gupt21@gmail.com>
+
+description: |
+  Bindings for the ambient light sensor veml6030 from Vishay
+  Semiconductors over an i2c interface.
+
+  Irrespective of whether interrupt is used or not, application
+  can get the ALS and White channel reading from IIO raw interface.
+
+  If the interrupts are used, application will receive an IIO event
+  whenever configured threshold is crossed.
+
+  Specifications about the sensor can be found at:
+    https://www.vishay.com/docs/84366/veml6030.pdf
+
+properties:
+  compatible:
+    enum:
+      - vishay,veml6030
+
+  reg:
+    description:
+      I2C address of the device.
+    enum:
+      - 0x10 # ADDR pin pulled down
+      - 0x48 # ADDR pin pulled up
+
+  interrupts:
+    description:
+      interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW.
+      Refer to interrupt-controller/interrupts.txt for generic
+      interrupt client node bindings.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@10 {
+                compatible = "vishay,veml6030";
+                reg = <0x10>;
+                interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt b/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt
deleted file mode 100644
index dd1058fbe9c3..000000000000
--- a/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* MaxBotix I2CXL-MaxSonar ultrasonic distance sensor of type  mb1202,
-  mb1212, mb1222, mb1232, mb1242, mb7040 or mb7137 using the i2c interface
-  for ranging
-
-Required properties:
- - compatible:		"maxbotix,mb1202",
-			"maxbotix,mb1212",
-			"maxbotix,mb1222",
-			"maxbotix,mb1232",
-			"maxbotix,mb1242",
-			"maxbotix,mb7040" or
-			"maxbotix,mb7137"
-
- - reg:			i2c address of the device, see also i2c/i2c.txt
-
-Optional properties:
- - interrupts:		Interrupt used to announce the preceding reading
-			request has finished and that data is available.
-			If no interrupt is specified the device driver
-			falls back to wait a fixed amount of time until
-			data can be retrieved.
-
-Example:
-proximity@70 {
-	compatible = "maxbotix,mb1232";
-	reg = <0x70>;
-	interrupt-parent = <&gpio2>;
-	interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-};
diff --git a/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml b/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml
new file mode 100644
index 000000000000..3eac248f291d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/maxbotix,mb1232.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MaxBotix I2CXL-MaxSonar ultrasonic distance sensor
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  MaxBotix I2CXL-MaxSonar ultrasonic distance sensor of type  mb1202,
+  mb1212, mb1222, mb1232, mb1242, mb7040 or mb7137 using the i2c interface
+  for ranging
+
+  Specifications about the devices can be found at:
+  https://www.maxbotix.com/documents/I2CXL-MaxSonar-EZ_Datasheet.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxbotix,mb1202
+      - maxbotix,mb1212
+      - maxbotix,mb1222
+      - maxbotix,mb1232
+      - maxbotix,mb1242
+      - maxbotix,mb7040
+      - maxbotix,mb7137
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt used to announce the preceding reading request has finished
+      and that data is available.  If no interrupt is specified the device
+      driver falls back to wait a fixed amount of time until data can be
+      retrieved.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@70 {
+        compatible = "maxbotix,mb1232";
+        reg = <0x70>;
+        interrupt-parent = <&gpio2>;
+        interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
new file mode 100644
index 000000000000..d4922f9f0376
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -0,0 +1,480 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2983 Multi-sensor Temperature system
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2983
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  adi,mux-delay-config-us:
+    description:
+      The LTC2983 performs 2 or 3 internal conversion cycles per temperature
+      result. Each conversion cycle is performed with different excitation and
+      input multiplexer configurations. Prior to each conversion, these
+      excitation circuits and input switch configurations are changed and an
+      internal 1ms delay ensures settling prior to the conversion cycle in most
+      cases. An extra delay can be configured using this property. The value is
+      rounded to nearest 100us.
+    maximum: 255
+
+  adi,filter-notch-freq:
+    description:
+      Set's the default setting of the digital filter. The default is
+      simultaneous 50/60Hz rejection.
+      0 - 50/60Hz rejection
+      1 - 60Hz rejection
+      2 - 50Hz rejection
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+        maximum: 2
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "@([1-9]|1[0-9]|20)$":
+    type: object
+
+    properties:
+      reg:
+        description:
+          The channel number. It can be connected to one of the 20 channels of
+          the device.
+        minimum: 1
+        maximum: 20
+
+      adi,sensor-type:
+        description: Identifies the type of sensor connected to the device.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - reg
+      - adi,sensor-type
+
+  "^thermocouple@":
+    type: object
+    description:
+      Represents a thermocouple sensor which is connected to one of the device
+      channels.
+
+    properties:
+      adi,sensor-type:
+        description: |
+          1 - Type J Thermocouple
+          2 - Type K Thermocouple
+          3 - Type E Thermocouple
+          4 - Type N Thermocouple
+          5 - Type R Thermocouple
+          6 - Type S Thermocouple
+          7 - Type T Thermocouple
+          8 - Type B Thermocouple
+          9 - Custom Thermocouple
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 9
+
+      adi,single-ended:
+        description:
+          Boolean property which set's the thermocouple as single-ended.
+        type: boolean
+
+      adi,sensor-oc-current-microamp:
+        description:
+          This property set's the pulsed current value applied during
+          open-circuit detect.
+        enum: [10, 100, 500, 1000]
+
+      adi,cold-junction-handle:
+        description:
+          Phandle which points to a sensor object responsible for measuring
+          the thermocouple cold junction temperature.
+        $ref: "/schemas/types.yaml#/definitions/phandle"
+
+      adi,custom-thermocouple:
+        description:
+          This is a table, where each entry should be a pair of
+          voltage(mv)-temperature(K). The entries must be given in nv and uK
+          so that, the original values must be multiplied by 1000000. For
+          more details look at table 69 and 70.
+          Note should be signed, but dtc doesn't currently maintain the
+          sign.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        items:
+          minItems: 3
+          maxItems: 64
+          items:
+            minItems: 2
+            maxItems: 2
+
+  "^diode@":
+    type: object
+    description:
+      Represents a diode sensor which is connected to one of the device
+      channels.
+
+    properties:
+      adi,sensor-type:
+        description: Identifies the sensor as a diode.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+        const: 28
+
+      adi,single-ended:
+        description: Boolean property which set's the diode as single-ended.
+        type: boolean
+
+      adi,three-conversion-cycles:
+        description:
+          Boolean property which set's three conversion cycles removing
+          parasitic resistance effects between the LTC2983 and the diode.
+        type: boolean
+
+      adi,average-on:
+        description:
+          Boolean property which enables a running average of the diode
+          temperature reading. This reduces the noise when the diode is used
+          as a cold junction temperature element on an isothermal block
+          where temperatures change slowly.
+        type: boolean
+
+      adi,excitation-current-microamp:
+        description:
+          This property controls the magnitude of the excitation current
+          applied to the diode. Depending on the number of conversions
+          cycles, this property will assume different predefined values on
+          each cycle. Just set the value of the first cycle (1l).
+        enum: [10, 20, 40, 80]
+
+      adi,ideal-factor-value:
+        description:
+          This property sets the diode ideality factor. The real value must
+          be multiplied by 1000000 to remove the fractional part. For more
+          information look at table 20 of the datasheet.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+  "^rtd@":
+    type: object
+    description:
+      Represents a rtd sensor which is connected to one of the device channels.
+
+    properties:
+      reg:
+        minimum: 2
+        maximum: 20
+
+      adi,sensor-type:
+        description: |
+          10 - RTD PT-10
+          11 - RTD PT-50
+          12 - RTD PT-100
+          13 - RTD PT-200
+          14 - RTD PT-500
+          15 - RTD PT-1000
+          16 - RTD PT-1000 (0.00375)
+          17 - RTD NI-120
+          18 - RTD Custom
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 10
+        maximum: 18
+
+      adi,rsense-handle:
+        description:
+          Phandle pointing to a rsense object associated with this RTD.
+        $ref: "/schemas/types.yaml#/definitions/phandle"
+
+      adi,number-of-wires:
+        description:
+          Identifies the number of wires used by the RTD. Setting this
+          property to 5 means 4 wires with Kelvin Rsense.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - enum: [2, 3, 4, 5]
+
+      adi,rsense-share:
+        description:
+          Boolean property which enables Rsense sharing, where one sense
+          resistor is used for multiple 2-, 3-, and/or 4-wire RTDs.
+        type: boolean
+
+      adi,current-rotate:
+        description:
+          Boolean property which enables excitation current rotation to
+          automatically remove parasitic thermocouple effects. Note that
+          this property is not allowed for 2- and 3-wire RTDs.
+        type: boolean
+
+      adi,excitation-current-microamp:
+        description:
+          This property controls the magnitude of the excitation current
+          applied to the RTD.
+        enum: [5, 10, 25, 50, 100, 250, 500, 1000]
+
+      adi,rtd-curve:
+        description:
+          This property set the RTD curve used and the corresponding
+          Callendar-VanDusen constants. Look at table 30 of the datasheet.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - minimum: 0
+            maximum: 3
+
+      adi,custom-rtd:
+        description:
+          This is a table, where each entry should be a pair of
+          resistance(ohm)-temperature(K). The entries added here are in uohm
+          and uK. For more details values look at table 74 and 75.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        items:
+          minItems: 3
+          maxItems: 64
+          items:
+            minItems: 2
+            maxItems: 2
+
+    required:
+      - adi,rsense-handle
+
+    dependencies:
+      adi,current-rotate: [ adi,rsense-share ]
+
+  "^thermistor@":
+    type: object
+    description:
+      Represents a thermistor sensor which is connected to one of the device
+      channels.
+
+    properties:
+      adi,sensor-type:
+        description:
+          19 - Thermistor 44004/44033 2.252kohm at 25°C
+          20 - Thermistor 44005/44030 3kohm at 25°C
+          21 - Thermistor 44007/44034 5kohm at 25°C
+          22 - Thermistor 44006/44031 10kohm at 25°C
+          23 - Thermistor 44008/44032 30kohm at 25°C
+          24 - Thermistor YSI 400 2.252kohm at 25°C
+          25 - Thermistor Spectrum 1003k 1kohm
+          26 - Thermistor Custom Steinhart-Hart
+          27 - Custom Thermistor
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 19
+        maximum: 27
+
+      adi,rsense-handle:
+        description:
+          Phandle pointing to a rsense object associated with this
+          thermistor.
+        $ref: "/schemas/types.yaml#/definitions/phandle"
+
+      adi,single-ended:
+        description:
+          Boolean property which set's the thermistor as single-ended.
+        type: boolean
+
+      adi,rsense-share:
+        description:
+          Boolean property which enables Rsense sharing, where one sense
+          resistor is used for multiple thermistors. Note that this property
+          is ignored if adi,single-ended is set.
+        type: boolean
+
+      adi,current-rotate:
+        description:
+          Boolean property which enables excitation current rotation to
+          automatically remove parasitic thermocouple effects.
+        type: boolean
+
+      adi,excitation-current-nanoamp:
+        description:
+          This property controls the magnitude of the excitation current
+          applied to the thermistor. Value 0 set's the sensor in auto-range
+          mode.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
+                   250000, 500000, 1000000]
+
+      adi,custom-thermistor:
+        description:
+          This is a table, where each entry should be a pair of
+          resistance(ohm)-temperature(K). The entries added here are in uohm
+          and uK only for custom thermistors. For more details look at table
+          78 and 79.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        items:
+          minItems: 3
+          maxItems: 64
+          items:
+            minItems: 2
+            maxItems: 2
+
+      adi,custom-steinhart:
+        description:
+          Steinhart-Hart coefficients are also supported and can
+          be programmed into the device memory using this property. For
+          Steinhart sensors the coefficients are given in the raw
+          format. Look at table 82 for more information.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minItems: 6
+          maxItems: 6
+
+    required:
+      - adi,rsense-handle
+
+    dependencies:
+      adi,current-rotate: [ adi,rsense-share ]
+
+  "^adc@":
+    type: object
+    description: Represents a channel which is being used as a direct adc.
+
+    properties:
+      adi,sensor-type:
+        description: Identifies the sensor as a direct adc.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+        const: 30
+
+      adi,single-ended:
+        description: Boolean property which set's the adc as single-ended.
+        type: boolean
+
+  "^rsense@":
+    type: object
+    description:
+      Represents a rsense which is connected to one of the device channels.
+      Rsense are used by thermistors and RTD's.
+
+    properties:
+      reg:
+        minimum: 2
+        maximum: 20
+
+      adi,sensor-type:
+        description: Identifies the sensor as a rsense.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+        const: 29
+
+      adi,rsense-val-milli-ohms:
+        description:
+          Sets the value of the sense resistor. Look at table 20 of the
+          datasheet for information.
+
+    required:
+      - adi,rsense-val-milli-ohms
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor_ltc2983: ltc2983@0 {
+                compatible = "adi,ltc2983";
+                reg = <0>;
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+                interrupt-parent = <&gpio>;
+
+                thermocouple@18 {
+                        reg = <18>;
+                        adi,sensor-type = <8>; //Type B
+                        adi,sensor-oc-current-microamp = <10>;
+                        adi,cold-junction-handle = <&diode5>;
+                };
+
+                diode5: diode@5 {
+                        reg = <5>;
+                        adi,sensor-type = <28>;
+                };
+
+                rsense2: rsense@2 {
+                        reg = <2>;
+                        adi,sensor-type = <29>;
+                        adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms
+                };
+
+                rtd@14 {
+                        reg = <14>;
+                        adi,sensor-type = <15>; //PT1000
+                        /*2-wire, internal gnd, no current rotation*/
+                        adi,number-of-wires = <2>;
+                        adi,rsense-share;
+                        adi,excitation-current-microamp = <500>;
+                        adi,rsense-handle = <&rsense2>;
+                };
+
+                adc@10 {
+                        reg = <10>;
+                        adi,sensor-type = <30>;
+                        adi,single-ended;
+                };
+
+                thermistor@12 {
+                        reg = <12>;
+                        adi,sensor-type = <26>; //Steinhart
+                        adi,rsense-handle = <&rsense2>;
+                        adi,custom-steinhart = <0x00F371EC 0x12345678
+                                        0x2C0F8733 0x10018C66 0xA0FEACCD
+                                        0x90021D99>; //6 entries
+                };
+
+                thermocouple@20 {
+                        reg = <20>;
+                        adi,sensor-type = <9>; //custom thermocouple
+                        adi,single-ended;
+                        adi,custom-thermocouple = /bits/ 64
+                                 <(-50220000) 0
+                                  (-30200000) 99100000
+                                  (-5300000) 135400000
+                                  0 273150000
+                                  40200000 361200000
+                                  55300000 522100000
+                                  88300000 720300000
+                                  132200000 811200000
+                                  188700000 922500000
+                                  460400000 1000000000>; //10 pairs
+               };
+
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 870ac52d2225..765fd1c170df 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -114,6 +114,18 @@ properties:
           - isil,isl68137
             # 5 Bit Programmable, Pulse-Width Modulator
           - maxim,ds1050
+            # 10-bit 8 channels 300ks/s SPI ADC with temperature sensor
+          - maxim,max1027
+            # 10-bit 12 channels 300ks/s SPI ADC with temperature sensor
+          - maxim,max1029
+            # 10-bit 16 channels 300ks/s SPI ADC with temperature sensor
+          - maxim,max1031
+            # 12-bit 8 channels 300ks/s SPI ADC with temperature sensor
+          - maxim,max1227
+            # 12-bit 12 channels 300ks/s SPI ADC with temperature sensor
+          - maxim,max1229
+            # 12-bit 16 channels 300ks/s SPI ADC with temperature sensor
+          - maxim,max1231
             # Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
           - maxim,max1237
             # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion