diff options
author | Mark Brown <broonie@kernel.org> | 2021-05-18 17:24:52 +0100 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2021-05-18 17:24:52 +0100 |
commit | c37fe6aff89cb0d842993fe2f69e48bf3ebe0ab0 (patch) | |
tree | 2a322c48218f7006bab789b7bf16ec58b129a096 /Documentation/devicetree/bindings | |
parent | d7aed20d446d8c87f5e13adf73281056b0064a45 (diff) | |
parent | d07f6ca923ea0927a1024dfccafc5b53b61cfecc (diff) | |
download | linux-c37fe6aff89cb0d842993fe2f69e48bf3ebe0ab0.tar.bz2 |
Merge tag 'v5.13-rc2' into spi-5.13
Linux 5.13-rc2
Diffstat (limited to 'Documentation/devicetree/bindings')
448 files changed, 18378 insertions, 5046 deletions
diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore index 3a05b99bfa26..a77719968a7e 100644 --- a/Documentation/devicetree/bindings/.gitignore +++ b/Documentation/devicetree/bindings/.gitignore @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only *.example.dts -processed-schema*.yaml -processed-schema*.json +/processed-schema*.yaml +/processed-schema*.json diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 780e5618ec0a..5ccfed90cc70 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -5,7 +5,7 @@ DT_MK_SCHEMA ?= dt-mk-schema DT_SCHEMA_LINT = $(shell which yamllint) -DT_SCHEMA_MIN_VERSION = 2020.8.1 +DT_SCHEMA_MIN_VERSION = 2021.2.1 PHONY += check_dtschema_version check_dtschema_version: @@ -48,13 +48,16 @@ define rule_chkdt $(call cmd,mk_schema) endef -DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||') +DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_cmd))) override DTC_FLAGS := \ -Wno-avoid_unnecessary_addr_size \ -Wno-graph_child_address \ -Wno-interrupt_provider +# Disable undocumented compatible checks until warning free +override DT_CHECKER_FLAGS ?= + $(obj)/processed-schema-examples.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE $(call if_changed_rule,chkdt) diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 5f6769bf45bd..97fb96266344 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -109,6 +109,7 @@ properties: - libretech,aml-s905d-pc - phicomm,n1 - smartlabs,sml5442tw + - videostrong,gxl-kii-pro - const: amlogic,s905d - const: amlogic,meson-gxl @@ -120,8 +121,10 @@ properties: - khadas,vim2 - kingnovel,r-box-pro - libretech,aml-s912-pc + - minix,neo-u9h - nexbox,a1 - tronsmart,vega-s96 + - videostrong,gxm-kiii-pro - wetek,core2 - const: amlogic,s912 - const: amlogic,meson-gxm diff --git a/Documentation/devicetree/bindings/arm/apple.yaml b/Documentation/devicetree/bindings/arm/apple.yaml new file mode 100644 index 000000000000..1e772c85206c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/apple.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/apple.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple ARM Machine Device Tree Bindings + +maintainers: + - Hector Martin <marcan@marcan.st> + +description: | + ARM platforms using SoCs designed by Apple Inc., branded "Apple Silicon". + + This currently includes devices based on the "M1" SoC, starting with the + three Mac models released in late 2020: + + - Mac mini (M1, 2020) + - MacBook Pro (13-inch, M1, 2020) + - MacBook Air (M1, 2020) + + The compatible property should follow this format: + + compatible = "apple,<targettype>", "apple,<socid>", "apple,arm-platform"; + + <targettype> represents the board/device and comes from the `target-type` + property of the root node of the Apple Device Tree, lowercased. It can be + queried on macOS using the following command: + + $ ioreg -d2 -l | grep target-type + + <socid> is the lowercased SoC ID. Apple uses at least *five* different + names for their SoCs: + + - Marketing name ("M1") + - Internal name ("H13G") + - Codename ("Tonga") + - SoC ID ("T8103") + - Package/IC part number ("APL1102") + + Devicetrees should use the lowercased SoC ID, to avoid confusion if + multiple SoCs share the same marketing name. This can be obtained from + the `compatible` property of the arm-io node of the Apple Device Tree, + which can be queried as follows on macOS: + + $ ioreg -n arm-io | grep compatible + +properties: + $nodename: + const: "/" + compatible: + oneOf: + - description: Apple M1 SoC based platforms + items: + - enum: + - apple,j274 # Mac mini (M1, 2020) + - apple,j293 # MacBook Pro (13-inch, M1, 2020) + - apple,j313 # MacBook Air (M1, 2020) + - const: apple,t8103 + - const: apple,arm-platform + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml index e55731f43c84..2cd4e4a32278 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml @@ -21,6 +21,7 @@ properties: items: - enum: - netgear,r8000p + - tplink,archer-c2300-v1 - const: brcm,bcm4906 - const: brcm,bcm4908 diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index a2c63c8b1d10..b369b374fc4a 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -26,10 +26,7 @@ properties: - const: simple-mfd mboxes: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Phandle to the firmware device's Mailbox. - (See: ../mailbox/mailbox.txt for more information) + maxItems: 1 clocks: type: object @@ -64,6 +61,21 @@ properties: - compatible - "#reset-cells" + pwm: + type: object + + properties: + compatible: + const: raspberrypi,firmware-poe-pwm + + "#pwm-cells": + # See pwm.yaml in this directory for a description of the cells format. + const: 2 + + required: + - compatible + - "#pwm-cells" + additionalProperties: false required: @@ -87,5 +99,10 @@ examples: compatible = "raspberrypi,firmware-reset"; #reset-cells = <1>; }; + + pwm: pwm { + compatible = "raspberrypi,firmware-poe-pwm"; + #pwm-cells = <2>; + }; }; ... diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 26b886b20b27..f3c7249c73d6 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -85,6 +85,8 @@ properties: compatible: enum: + - apple,icestorm + - apple,firestorm - arm,arm710t - arm,arm720t - arm,arm740t @@ -256,13 +258,11 @@ properties: where voltage is in V, frequency is in MHz. power-domains: - $ref: '/schemas/types.yaml#/definitions/phandle-array' description: List of phandles and PM domain specifiers, as defined by bindings of the PM domain provider (see also ../power_domain.txt). power-domain-names: - $ref: '/schemas/types.yaml#/definitions/string-array' description: A list of power domain name strings sorted in the same order as the power-domains property. diff --git a/Documentation/devicetree/bindings/arm/ete.yaml b/Documentation/devicetree/bindings/arm/ete.yaml new file mode 100644 index 000000000000..7f9b2d1e1147 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ete.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# Copyright 2021, Arm Ltd +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/ete.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ARM Embedded Trace Extensions + +maintainers: + - Suzuki K Poulose <suzuki.poulose@arm.com> + - Mathieu Poirier <mathieu.poirier@linaro.org> + +description: | + Arm Embedded Trace Extension(ETE) is a per CPU trace component that + allows tracing the CPU execution. It overlaps with the CoreSight ETMv4 + architecture and has extended support for future architecture changes. + The trace generated by the ETE could be stored via legacy CoreSight + components (e.g, TMC-ETR) or other means (e.g, using a per CPU buffer + Arm Trace Buffer Extension (TRBE)). Since the ETE can be connected to + legacy CoreSight components, a node must be listed per instance, along + with any optional connection graph as per the coresight bindings. + See bindings/arm/coresight.txt. + +properties: + $nodename: + pattern: "^ete([0-9a-f]+)$" + compatible: + items: + - const: arm,embedded-trace-extension + + cpu: + description: | + Handle to the cpu this ETE is bound to. + $ref: /schemas/types.yaml#/definitions/phandle + + out-ports: + description: | + Output connections from the ETE to legacy CoreSight trace bus. + $ref: /schemas/graph.yaml#/properties/ports + properties: + port: + description: Output connection from the ETE to legacy CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - cpu + +additionalProperties: false + +examples: + +# An ETE node without legacy CoreSight connections + - | + ete0 { + compatible = "arm,embedded-trace-extension"; + cpu = <&cpu_0>; + }; +# An ETE node with legacy CoreSight connections + - | + ete1 { + compatible = "arm,embedded-trace-extension"; + cpu = <&cpu_1>; + + out-ports { /* legacy coresight connection */ + port { + ete1_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 297c87f45db8..e3c50f231d71 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -617,6 +617,7 @@ properties: - kam,imx7d-flex-concentrator # Kamstrup OMNIA Flex Concentrator - kam,imx7d-flex-concentrator-mfg # Kamstrup OMNIA Flex Concentrator in manufacturing mode - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board + - remarkable,imx7d-remarkable2 # i.MX7D ReMarkable 2 E-Ink Tablet - technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph @@ -688,6 +689,14 @@ properties: - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module - const: fsl,imx8mm + - description: Engicam i.Core MX8M Mini SoM based boards + items: + - enum: + - engicam,icore-mx8mm-ctouch2 # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0 + - engicam,icore-mx8mm-edimm2.2 # i.MX8MM Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit + - const: engicam,icore-mx8mm # i.MX8MM Engicam i.Core MX8M Mini SoM + - const: fsl,imx8mm + - description: Kontron BL i.MX8MM (N801X S) Board items: - const: kontron,imx8mm-n801x-s @@ -733,6 +742,7 @@ properties: - einfochips,imx8mq-thor96 # i.MX8MQ Thor96 Board - fsl,imx8mq-evk # i.MX8MQ EVK Board - google,imx8mq-phanbell # Google Coral Edge TPU + - kontron,pitx-imx8m # Kontron pITX-imx8m Board - purism,librem5-devkit # Purism Librem5 devkit - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse - technexion,pico-pi-imx8m # TechNexion PICO-PI-8M evk @@ -755,6 +765,12 @@ properties: - const: zii,imx8mq-ultra - const: fsl,imx8mq + - description: i.MX8QM based Boards + items: + - enum: + - fsl,imx8qm-mek # i.MX8QM MEK Board + - const: fsl,imx8qm + - description: i.MX8QXP based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt index a21f7709596c..0705e765f432 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt @@ -142,8 +142,8 @@ mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg( mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10) mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq) mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led) -mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio(wr_protect) -mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio(card_detect) +mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio_wp(wr_protect) +mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio_cd(card_detect) mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk) mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd) mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0) diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 93b3bdf6eaeb..aff57a8c8c30 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -118,6 +118,10 @@ properties: - enum: - mediatek,mt8183-evb - const: mediatek,mt8183 + - items: + - enum: + - mediatek,mt8195-evb + - const: mediatek,mt8195 - description: Google Krane (Lenovo IdeaPad Duet, 10e,...) items: - enum: @@ -125,6 +129,38 @@ properties: - google,krane-sku176 - const: google,krane - const: mediatek,mt8183 + - description: Google Damu (ASUS Chromebook Flip CM3) + items: + - const: google,damu + - const: mediatek,mt8183 + - description: Google Juniper (Acer Chromebook Spin 311) + items: + - const: google,juniper-sku16 + - const: google,juniper + - const: mediatek,mt8183 + - description: Google Kakadu (ASUS Chromebook Detachable CM3) + items: + - const: google,kakadu-rev3 + - const: google,kakadu-rev2 + - const: google,kakadu + - const: mediatek,mt8183 + - description: Google Kodama (Lenovo 10e Chromebook Tablet) + items: + - enum: + - google,kodama-sku16 + - google,kodama-sku272 + - google,kodama-sku288 + - google,kodama-sku32 + - const: google,kodama + - const: mediatek,mt8183 + - items: + - enum: + - mediatek,mt8183-pumpkin + - const: mediatek,mt8183 + - items: + - enum: + - mediatek,mt8516-pumpkin + - const: mediatek,mt8516 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index d8c9108c3b4a..78c50733985c 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -13,6 +13,7 @@ Required Properties: - "mediatek,mt6779-mmsys", "syscon" - "mediatek,mt6797-mmsys", "syscon" - "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon" + - "mediatek,mt8167-mmsys", "syscon" - "mediatek,mt8173-mmsys", "syscon" - "mediatek,mt8183-mmsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml index c299dc907f6c..62fcbd883392 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml @@ -22,6 +22,7 @@ properties: compatible: enum: - qcom,sc7180-llcc + - qcom,sc7280-llcc - qcom,sdm845-llcc - qcom,sm8150-llcc - qcom,sm8250-llcc diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml index 61d08c473eb8..a316eef1b728 100644 --- a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml +++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml @@ -24,6 +24,7 @@ properties: items: - enum: - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit + - m5stack,unitv2 # M5Stack UnitV2 - const: mstar,infinity2m - description: infinity3 boards diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.txt b/Documentation/devicetree/bindings/arm/npcm/npcm.txt deleted file mode 100644 index 2d87d9ecea85..000000000000 --- a/Documentation/devicetree/bindings/arm/npcm/npcm.txt +++ /dev/null @@ -1,6 +0,0 @@ -NPCM Platforms Device Tree Bindings ------------------------------------ -NPCM750 SoC -Required root node properties: - - compatible = "nuvoton,npcm750"; - diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml new file mode 100644 index 000000000000..95e51378089c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/npcm/npcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NPCM Platforms Device Tree Bindings + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@gmx.net> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: WPCM450 based boards + items: + - enum: + - supermicro,x9sci-ln4f-bmc # Supermicro X9SCI-LN4F server's BMC + - const: nuvoton,wpcm450 + + - description: NPCM750 based boards + items: + - enum: + - nuvoton,npcm750-evb # NPCM750 evaluation board + - const: nuvoton,npcm750 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 174134f920e1..9b27e991bddc 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -37,6 +37,7 @@ description: | msm8994 msm8996 sc7180 + sc7280 sdm630 sdm660 sdm845 @@ -137,6 +138,16 @@ properties: - const: qcom,msm8916 - items: + - enum: + - sony,karin_windy + - sony,karin-row + - sony,satsuki-row + - sony,sumire-row + - sony,suzuran-row + - qcom,msm8994 + - const: qcom,apq8094 + + - items: - const: qcom,msm8996-mtp - items: @@ -166,16 +177,24 @@ properties: - items: - enum: + - qcom,sc7280-idp + - const: qcom,sc7280 + + - items: + - enum: - xiaomi,lavender - const: qcom,sdm660 - items: - enum: - qcom,sdx55-mtp + - qcom,sdx55-telit-fn980-tlb + - qcom,sdx55-t55 - const: qcom,sdx55 - items: - enum: + - qcom,ipq6018-cp01 - qcom,ipq6018-cp01-c1 - const: qcom,ipq6018 @@ -187,6 +206,7 @@ properties: - items: - enum: + - qcom,sm8350-hdk - qcom,sm8350-mtp - const: qcom,sm8350 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index c3036f95c7bc..4a6f772c1043 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -134,6 +134,7 @@ properties: - friendlyarm,nanopi-m4 - friendlyarm,nanopi-m4b - friendlyarm,nanopi-neo4 + - friendlyarm,nanopi-r4s - const: rockchip,rk3399 - description: GeekBuying GeekBox diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index e7525a3395e5..9a77ab74be99 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -53,6 +53,10 @@ properties: - const: st,stm32h743 - items: - enum: + - st,stm32h750i-art-pi + - const: st,stm32h750 + - items: + - enum: - shiratech,stm32mp157a-iot-box # IoT Box - shiratech,stm32mp157a-stinger96 # Stinger96 - st,stm32mp157c-ed1 @@ -64,6 +68,23 @@ properties: - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 + + - description: Engicam i.Core STM32MP1 SoM based Boards + items: + - enum: + - engicam,icore-stm32mp1-ctouch2 # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0 + - engicam,icore-stm32mp1-edimm2.2 # STM32MP1 Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit + - const: engicam,icore-stm32mp1 # STM32MP1 Engicam i.Core STM32MP1 SoM + - const: st,stm32mp157 + + - description: Engicam MicroGEA STM32MP1 SoM based Boards + items: + - enum: + - engicam,microgea-stm32mp1-microdev2.0 + - engicam,microgea-stm32mp1-microdev2.0-of7 + - const: engicam,microgea-stm32mp1 + - const: st,stm32mp157 + - description: Octavo OSD32MP15x System-in-Package based boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 08607c7ec1bf..ac750025a2eb 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -802,6 +802,11 @@ properties: - const: tbs-biometrics,a711 - const: allwinner,sun8i-a83t + - description: Topwise A721 Tablet + items: + - const: topwise,a721 + - const: allwinner,sun4i-a10 + - description: Utoo P66 items: - const: utoo,p66 diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index c6e1c1e63e43..c5aa362e4026 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -23,6 +23,8 @@ properties: items: - enum: - ti,am654-evm + - siemens,iot2050-basic + - siemens,iot2050-advanced - const: ti,am654 - description: K3 J721E SoC @@ -33,6 +35,13 @@ properties: items: - const: ti,j7200 + - description: K3 AM642 SoC + items: + - enum: + - ti,am642-evm + - ti,am642-sk + - const: ti,am642 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/trbe.yaml b/Documentation/devicetree/bindings/arm/trbe.yaml new file mode 100644 index 000000000000..4402d7bfd1fc --- /dev/null +++ b/Documentation/devicetree/bindings/arm/trbe.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# Copyright 2021, Arm Ltd +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/trbe.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ARM Trace Buffer Extensions + +maintainers: + - Anshuman Khandual <anshuman.khandual@arm.com> + +description: | + Arm Trace Buffer Extension (TRBE) is a per CPU component + for storing trace generated on the CPU to memory. It is + accessed via CPU system registers. The software can verify + if it is permitted to use the component by checking the + TRBIDR register. + +properties: + $nodename: + const: "trbe" + compatible: + items: + - const: arm,trace-buffer-extension + + interrupts: + description: | + Exactly 1 PPI must be listed. For heterogeneous systems where + TRBE is only supported on a subset of the CPUs, please consult + the arm,gic-v3 binding for details on describing a PPI partition. + maxItems: 1 + +required: + - compatible + - interrupts + +additionalProperties: false + +examples: + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + trbe { + compatible = "arm,trace-buffer-extension"; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; +... diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt index 7561cc4de371..bfb6da0281ec 100644 --- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt +++ b/Documentation/devicetree/bindings/ata/ahci-ceva.txt @@ -38,6 +38,8 @@ Required properties: Optional properties: - ceva,broken-gen2: limit to gen1 speed instead of gen2. + - phys: phandle for the PHY device + - resets: phandle to the reset controller for the SATA IP Examples: ahci@fd0c0000 { @@ -56,4 +58,6 @@ Examples: ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; ceva,broken-gen2; + phys = <&psgtr 1 PHY_TYPE_SATA 1 1>; + resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; }; diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml new file mode 100644 index 000000000000..a75e9a8f539a --- /dev/null +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/nvidia,tegra-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra AHCI SATA Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra124-ahci + - nvidia,tegra132-ahci + - nvidia,tegra210-ahci + - nvidia,tegra186-ahci + + reg: + minItems: 2 + maxItems: 3 + items: + - description: AHCI registers + - description: SATA configuration and IPFS registers + - description: SATA AUX registers + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: sata + - const: sata-oob + + clocks: + maxItems: 2 + + reset-names: + minItems: 2 + items: + - const: sata + - const: sata-cold + - const: sata-oob + + resets: + minItems: 2 + maxItems: 3 + + iommus: + maxItems: 1 + + interconnect-names: + items: + - const: dma-mem + - const: write + + interconnects: + maxItems: 2 + + power-domains: + items: + - description: SAX power-domain + + phy-names: + items: + - const: sata-0 + + phys: + maxItems: 1 + + hvdd-supply: + description: SATA HVDD regulator supply. + + vddio-supply: + description: SATA VDDIO regulator supply. + + avdd-supply: + description: SATA AVDD regulator supply. + + target-5v-supply: + description: SATA 5V power regulator supply. + + target-12v-supply: + description: SATA 12V power regulator supply. + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + - reset-names + - resets + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra124-ahci + - nvidia,tegra132-ahci + then: + properties: + reg: + maxItems: 2 + reset-names: + minItems: 3 + resets: + minItems: 3 + required: + - phys + - phy-names + - hvdd-supply + - vddio-supply + - avdd-supply + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra210-ahci + then: + properties: + reg: + minItems: 3 + reset-names: + minItems: 3 + resets: + minItems: 3 + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra186-ahci + then: + properties: + reg: + minItems: 3 + reset-names: + maxItems: 2 + resets: + maxItems: 2 + required: + - iommus + - interconnect-names + - interconnects + - power-domains + +additionalProperties: true + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/reset/tegra210-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sata@70020000 { + compatible = "nvidia,tegra210-ahci"; + reg = <0x70027000 0x00002000>, /* AHCI */ + <0x70020000 0x00007000>, /* SATA */ + <0x70001100 0x00010000>; /* SATA AUX */ + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SATA>, + <&tegra_car TEGRA210_CLK_SATA_OOB>; + clock-names = "sata", "sata-oob"; + resets = <&tegra_car 124>, + <&tegra_car 129>, + <&tegra_car 123>; + reset-names = "sata", "sata-cold", "sata-oob"; + }; diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt deleted file mode 100644 index 12ab2f723eb0..000000000000 --- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt +++ /dev/null @@ -1,44 +0,0 @@ -Tegra SoC SATA AHCI controller - -Required properties : -- compatible : Must be one of: - - Tegra124 : "nvidia,tegra124-ahci" - - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci" - - Tegra210 : "nvidia,tegra210-ahci" -- reg : Should contain 2 entries: - - AHCI register set (SATA BAR5) - - SATA register set -- interrupts : Defines the interrupt used by SATA -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - - sata - - sata-oob -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - sata - - sata-oob - - sata-cold -- phys : Must contain an entry for each entry in phy-names. - See ../phy/phy-bindings.txt for details. -- phy-names : Must include the following entries: - - For Tegra124 and Tegra132: - - sata-phy : XUSB PADCTL SATA PHY -- For Tegra124 and Tegra132: - - hvdd-supply : Defines the SATA HVDD regulator - - vddio-supply : Defines the SATA VDDIO regulator - - avdd-supply : Defines the SATA AVDD regulator - - target-5v-supply : Defines the SATA 5V power regulator - - target-12v-supply : Defines the SATA 12V power regulator - -Optional properties: -- reg : - - AUX register set -- clock-names : - - cml1 : - cml1 clock should be defined here if the PHY driver - doesn't manage them. If it does, they should not be. -- phy-names : - - For T210: - - sata-phy diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml index e9c4cf834aa7..e5d9d45dab8a 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml @@ -44,7 +44,7 @@ examples: - | clk@1c20000 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1"; + compatible = "allwinner,sun4i-a10-pll1-clk"; reg = <0x01c20000 0x4>; clocks = <&osc24M>; clock-output-names = "osc24M"; diff --git a/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt index 0ba1d83ff363..ed1df32c577a 100644 --- a/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt +++ b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt @@ -1,6 +1,6 @@ * Time Base Generator Clock bindings for Marvell Armada 37xx SoCs -Marvell Armada 37xx SoCs provde Time Base Generator clocks which are +Marvell Armada 37xx SoCs provide Time Base Generator clocks which are used as parent clocks for the peripheral clocks. The TBG clock consumer should specify the desired clock by having the diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml index 940486ef1051..0f6fe365ebf3 100644 --- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml @@ -107,8 +107,8 @@ examples: interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b010000 0x10000>; clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, - <&sdhc0_lpcg IMX_LPCG_CLK_0>, - <&sdhc0_lpcg IMX_LPCG_CLK_5>; - clock-names = "ipg", "per", "ahb"; + <&sdhc0_lpcg IMX_LPCG_CLK_5>, + <&sdhc0_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "ahb", "per"; power-domains = <&pd IMX_SC_R_SDHC_0>; }; diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml new file mode 100644 index 000000000000..915f84efd763 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/mediatek,mt7621-sysc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT7621 Clock Device Tree Bindings + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + The MT7621 has a PLL controller from where the cpu clock is provided + as well as derived clocks for the bus and the peripherals. It also + can gate SoC device clocks. + + Each clock is assigned an identifier and client nodes use this identifier + to specify the clock which they consume. + + All these identifiers could be found in: + [1]: <include/dt-bindings/clock/mt7621-clk.h>. + + The clocks are provided inside a system controller node. + +properties: + compatible: + items: + - const: mediatek,mt7621-sysc + - const: syscon + + reg: + maxItems: 1 + + "#clock-cells": + description: + The first cell indicates the clock number, see [1] for available + clocks. + const: 1 + + ralink,memctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of syscon used to control memory registers + + clock-output-names: + maxItems: 8 + +required: + - compatible + - reg + - '#clock-cells' + - ralink,memctl + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt7621-clk.h> + + sysc: sysc@0 { + compatible = "mediatek,mt7621-sysc", "syscon"; + reg = <0x0 0x100>; + #clock-cells = <1>; + ralink,memctl = <&memc>; + clock-output-names = "xtal", "cpu", "bus", + "50m", "125m", "150m", + "250m", "270m"; + }; diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml index 0e8b07710451..6d39344d2b70 100644 --- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml @@ -18,10 +18,12 @@ description: | properties: compatible: - oneOf: - - items: - - enum: - - socionext,milbeaut-m10v-ccu + enum: + - socionext,milbeaut-m10v-ccu + + reg: + maxItems: 1 + clocks: maxItems: 1 description: external clock @@ -41,7 +43,7 @@ examples: # Clock controller node: - | m10v-clk-ctrl@1d021000 { - compatible = "socionext,milbeaut-m10v-clk-ccu"; + compatible = "socionext,milbeaut-m10v-ccu"; reg = <0x1d021000 0x4000>; #clock-cells = <1>; clocks = <&clki40mhz>; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml new file mode 100644 index 000000000000..d902f137ab17 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sdm845.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SDM845 + + See also: + - dt-bindings/clock/qcom,gcc-sdm845.h + +properties: + compatible: + const: qcom,gcc-sdm845 + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + - description: PCIE 0 Pipe clock source + - description: PCIE 1 Pipe clock source + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: sleep_clk + - const: pcie_0_pipe_clk + - const: pcie_1_pipe_clk + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - compatible + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + # Example for GCC for SDM845: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sdm845"; + reg = <0x100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie0_lane>, + <&pcie1_lane>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml index ee0467fb5e31..490edad25830 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml @@ -32,7 +32,6 @@ description: | - dt-bindings/clock/qcom,gcc-mdm9615.h - dt-bindings/reset/qcom,gcc-mdm9615.h - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) - - dt-bindings/clock/qcom,gcc-sdm845.h properties: compatible: @@ -52,7 +51,6 @@ properties: - qcom,gcc-mdm9615 - qcom,gcc-sdm630 - qcom,gcc-sdm660 - - qcom,gcc-sdm845 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml new file mode 100644 index 000000000000..b2c26097827f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3568-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROCKCHIP rk3568 Family Clock Control Module Binding + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3568 clock controller generates the clock and also implements a + reset controller for SoC peripherals. + (examples: provide SCLK_UART1\PCLK_UART1 and SRST_P_UART1\SRST_S_UART1 for UART module) + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3568-cru.h headers and can be + used in device tree sources. + +properties: + compatible: + enum: + - rockchip,rk3568-cru + - rockchip,rk3568-pmucru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + # Clock Control Module node: + - | + pmucru: clock-controller@fdd00000 { + compatible = "rockchip,rk3568-pmucru"; + reg = <0xfdd00000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + - | + cru: clock-controller@fdd20000 { + compatible = "rockchip,rk3568-cru"; + reg = <0xfdd20000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index b6daedd62516..32509b98142e 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -197,6 +197,16 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 3] + slow-charger-loop: + description: Allows PMIC charger loops which are slow(i.e. cannot meet the 15ms deadline) to + still comply to pSnkStby i.e Maximum power that can be consumed by sink while in Sink Standby + state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification + Revision 3.0, Version 1.2. When the property is set, the port requests pSnkStby(2.5W - + 5V@500mA) upon entering SNK_DISCOVERY(instead of 3A or the 1.5A, Rp current advertised, during + SNK_DISCOVERY) and the actual currrent limit after reception of PS_Ready for PD link or during + SNK_READY for non-pd link. + type: boolean + required: - compatible diff --git a/Documentation/devicetree/bindings/counter/interrupt-counter.yaml b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml new file mode 100644 index 000000000000..fd075d104631 --- /dev/null +++ b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/counter/interrupt-counter.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Interrupt counter + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: | + A generic interrupt counter to measure interrupt frequency. It was developed + and used for agricultural devices to measure rotation speed of wheels or + other tools. Since the direction of rotation is not important, only one + signal line is needed. + Interrupts or gpios are required. If both are defined, the interrupt will + take precedence for counting interrupts. + +properties: + compatible: + const: interrupt-counter + + interrupts: + maxItems: 1 + + gpios: + maxItems: 1 + +required: + - compatible + +anyOf: + - required: [ interrupts-extended ] + - required: [ interrupts ] + - required: [ gpios ] + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + + counter-0 { + compatible = "interrupt-counter"; + interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_RISING>; + }; + + counter-1 { + compatible = "interrupt-counter"; + gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + }; + + counter-2 { + compatible = "interrupt-counter"; + interrupts-extended = <&gpio 2 IRQ_TYPE_EDGE_RISING>; + gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + }; + +... diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml index 1d48ac712b23..a410d2cedde6 100644 --- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml +++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml @@ -14,6 +14,7 @@ properties: enum: - ti,j721e-sa2ul - ti,am654-sa2ul + - ti,am64-sa2ul reg: maxItems: 1 @@ -45,6 +46,18 @@ properties: description: Address translation for the possible RNG child node for SA2UL + clocks: + items: + - description: Clock used by PKA + - description: Main Input Clock + - description: Clock used by rng + + clock-names: + items: + - const: pka_in_clk + - const: x1_clk + - const: x2_clk + patternProperties: "^rng@[a-f0-9]+$": type: object @@ -57,7 +70,16 @@ required: - power-domains - dmas - dma-names - - dma-coherent + +if: + properties: + compatible: + enum: + - ti,j721e-sa2ul + - ti,am654-sa2ul +then: + required: + - dma-coherent additionalProperties: false diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt index a0eda35a86ee..b221e653d384 100644 --- a/Documentation/devicetree/bindings/ddr/lpddr3.txt +++ b/Documentation/devicetree/bindings/ddr/lpddr3.txt @@ -12,6 +12,9 @@ Required properties: Optional properties: +- manufacturer-id : <u32> Manufacturer ID value read from Mode Register 5 +- revision-id : <u32 u32> Revision IDs read from Mode Registers 6 and 7 + The following optional properties represent the minimum value of some AC timing parameters of the DDR device in terms of number of clock cycles. These values shall be obtained from the device data-sheet. @@ -49,6 +52,8 @@ samsung_K3QF2F20DB: lpddr3 { compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; density = <16384>; io-width = <32>; + manufacturer-id = <1>; + revision-id = <123 234>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt index a10d1f6d85c6..ac189dd82b08 100644 --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt @@ -12,6 +12,8 @@ Required properties: for details. - center-supply: DMC supply node. - status: Marks the node enabled/disabled. +- rockchip,pmu: Phandle to the syscon managing the "PMU general register + files". Optional properties: - interrupts: The CPU interrupt number. The interrupt specifier @@ -77,24 +79,23 @@ Following properties relate to DDR timing: - rockchip,ddr3_drv : When the DRAM type is DDR3, this parameter defines the DRAM side driver strength in ohms. Default - value is DDR3_DS_40ohm. + value is 40. - rockchip,ddr3_odt : When the DRAM type is DDR3, this parameter defines the DRAM side ODT strength in ohms. Default value - is DDR3_ODT_120ohm. + is 120. - rockchip,phy_ddr3_ca_drv : When the DRAM type is DDR3, this parameter defines the phy side CA line (incluing command line, address line and clock line) driver strength. - Default value is PHY_DRV_ODT_40. + Default value is 40. - rockchip,phy_ddr3_dq_drv : When the DRAM type is DDR3, this parameter defines the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is PHY_DRV_ODT_40. + driver strength. Default value is 40. - rockchip,phy_ddr3_odt : When the DRAM type is DDR3, this parameter defines - the PHY side ODT strength. Default value is - PHY_DRV_ODT_240. + the PHY side ODT strength. Default value is 240. - rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines then ODT disable frequency in MHz (Mega Hz). @@ -104,25 +105,23 @@ Following properties relate to DDR timing: - rockchip,lpddr3_drv : When the DRAM type is LPDDR3, this parameter defines the DRAM side driver strength in ohms. Default - value is LP3_DS_34ohm. + value is 34. - rockchip,lpddr3_odt : When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT strength in ohms. Default value - is LP3_ODT_240ohm. + is 240. - rockchip,phy_lpddr3_ca_drv : When the DRAM type is LPDDR3, this parameter defines the PHY side CA line (including command line, address line and clock line) driver strength. - Default value is PHY_DRV_ODT_40. + Default value is 40. - rockchip,phy_lpddr3_dq_drv : When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is - PHY_DRV_ODT_40. + driver strength. Default value is 40. - rockchip,phy_lpddr3_odt : When dram type is LPDDR3, this parameter define - the phy side odt strength, default value is - PHY_DRV_ODT_240. + the phy side odt strength, default value is 240. - rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter defines the ODT disable frequency in @@ -132,32 +131,30 @@ Following properties relate to DDR timing: - rockchip,lpddr4_drv : When the DRAM type is LPDDR4, this parameter defines the DRAM side driver strength in ohms. Default - value is LP4_PDDS_60ohm. + value is 60. - rockchip,lpddr4_dq_odt : When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on DQS/DQ line strength in ohms. - Default value is LP4_DQ_ODT_40ohm. + Default value is 40. - rockchip,lpddr4_ca_odt : When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on CA line strength in ohms. - Default value is LP4_CA_ODT_40ohm. + Default value is 40. - rockchip,phy_lpddr4_ca_drv : When the DRAM type is LPDDR4, this parameter defines the PHY side CA line (including command address - line) driver strength. Default value is - PHY_DRV_ODT_40. + line) driver strength. Default value is 40. - rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines the PHY side clock line and CS line driver - strength. Default value is PHY_DRV_ODT_80. + strength. Default value is 80. - rockchip,phy_lpddr4_dq_drv : When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is PHY_DRV_ODT_80. + driver strength. Default value is 80. - rockchip,phy_lpddr4_odt : When the DRAM type is LPDDR4, this parameter defines - the PHY side ODT strength. Default value is - PHY_DRV_ODT_60. + the PHY side ODT strength. Default value is 60. Example: dmc_opp_table: dmc_opp_table { @@ -193,23 +190,23 @@ Example: rockchip,phy_dll_dis_freq = <125>; rockchip,auto_pd_dis_freq = <666>; rockchip,ddr3_odt_dis_freq = <333>; - rockchip,ddr3_drv = <DDR3_DS_40ohm>; - rockchip,ddr3_odt = <DDR3_ODT_120ohm>; - rockchip,phy_ddr3_ca_drv = <PHY_DRV_ODT_40>; - rockchip,phy_ddr3_dq_drv = <PHY_DRV_ODT_40>; - rockchip,phy_ddr3_odt = <PHY_DRV_ODT_240>; + rockchip,ddr3_drv = <40>; + rockchip,ddr3_odt = <120>; + rockchip,phy_ddr3_ca_drv = <40>; + rockchip,phy_ddr3_dq_drv = <40>; + rockchip,phy_ddr3_odt = <240>; rockchip,lpddr3_odt_dis_freq = <333>; - rockchip,lpddr3_drv = <LP3_DS_34ohm>; - rockchip,lpddr3_odt = <LP3_ODT_240ohm>; - rockchip,phy_lpddr3_ca_drv = <PHY_DRV_ODT_40>; - rockchip,phy_lpddr3_dq_drv = <PHY_DRV_ODT_40>; - rockchip,phy_lpddr3_odt = <PHY_DRV_ODT_240>; + rockchip,lpddr3_drv = <34>; + rockchip,lpddr3_odt = <240>; + rockchip,phy_lpddr3_ca_drv = <40>; + rockchip,phy_lpddr3_dq_drv = <40>; + rockchip,phy_lpddr3_odt = <240>; rockchip,lpddr4_odt_dis_freq = <333>; - rockchip,lpddr4_drv = <LP4_PDDS_60ohm>; - rockchip,lpddr4_dq_odt = <LP4_DQ_ODT_40ohm>; - rockchip,lpddr4_ca_odt = <LP4_CA_ODT_40ohm>; - rockchip,phy_lpddr4_ca_drv = <PHY_DRV_ODT_40>; - rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>; - rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>; - rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>; + rockchip,lpddr4_drv = <60>; + rockchip,lpddr4_dq_odt = <40>; + rockchip,lpddr4_ca_odt = <40>; + rockchip,phy_lpddr4_ca_drv = <40>; + rockchip,phy_lpddr4_ck_cs_drv = <80>; + rockchip,phy_lpddr4_dq_drv = <80>; + rockchip,phy_lpddr4_odt = <60>; }; diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index c13faf3e6581..3a7d5d731712 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -73,7 +73,6 @@ properties: clock-output-names: description: Name of the LCD pixel clock created. - $ref: /schemas/types.yaml#/definitions/string-array maxItems: 1 dmas: diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml index b3e9992525c2..907fb47cc84a 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -12,8 +12,8 @@ description: | and CEC. These DT bindings follow the Synopsys DWC HDMI TX bindings defined - in Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with - the following device-specific properties. + in bridge/synopsys,dw-hdmi.yaml with the following device-specific + properties. maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml index 55c60919991f..32608578a352 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml @@ -77,12 +77,6 @@ examples: clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; - pitouchscreen: panel@0 { - compatible = "raspberrypi,touchscreen"; - reg = <0>; - - /* ... */ - }; }; ... diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index c789784efe30..ab48ab2f4240 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -34,6 +34,15 @@ properties: description: used for reset chip control, RESET_N pin B7. maxItems: 1 + vdd10-supply: + description: Regulator that provides the supply 1.0V power. + + vdd18-supply: + description: Regulator that provides the supply 1.8V power. + + vdd33-supply: + description: Regulator that provides the supply 3.3V power. + ports: $ref: /schemas/graph.yaml#/properties/ports @@ -55,6 +64,9 @@ properties: required: - compatible - reg + - vdd10-supply + - vdd18-supply + - vdd33-supply - ports additionalProperties: false @@ -72,6 +84,9 @@ examples: reg = <0x58>; enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1000_mipibrdg>; + vdd18-supply = <&pp1800_mipibrdg>; + vdd33-supply = <&pp3300_mipibrdg>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml new file mode 100644 index 000000000000..62c3bd4cb28d --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge + +maintainers: + - Jagan Teki <jagan@amarulasolutions.com> + +description: | + ICN6211 is MIPI-DSI to RGB Converter bridge from chipone. + + It has a flexible configuration of MIPI DSI signal input and + produce RGB565, RGB666, RGB888 output format. + +properties: + compatible: + enum: + - chipone,icn6211 + + reg: + maxItems: 1 + description: virtual channel number of a DSI peripheral + + enable-gpios: + description: Bridge EN pin, chip is reset when EN is low. + + vdd1-supply: + description: A 1.8V/2.5V/3.3V supply that power the MIPI RX. + + vdd2-supply: + description: A 1.8V/2.5V/3.3V supply that power the PLL. + + vdd3-supply: + description: A 1.8V/2.5V/3.3V supply that power the RGB output. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DSI input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DPI output (panel or connector). + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - enable-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + compatible = "chipone,icn6211"; + reg = <0>; + enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_in_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + }; + }; + + port@1 { + reg = <1>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt deleted file mode 100644 index 33bf981fbe33..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt +++ /dev/null @@ -1,33 +0,0 @@ -Synopsys DesignWare HDMI TX Encoder -=================================== - -This document defines device tree properties for the Synopsys DesignWare HDMI -TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding -specification by itself but is meant to be referenced by platform-specific -device tree bindings. - -When referenced from platform device tree bindings the properties defined in -this document are defined as follows. The platform device tree bindings are -responsible for defining whether each property is required or optional. - -- reg: Memory mapped base address and length of the DWC HDMI TX registers. - -- reg-io-width: Width of the registers specified by the reg property. The - value is expressed in bytes and must be equal to 1 or 4 if specified. The - register width defaults to 1 if the property is not present. - -- interrupts: Reference to the DWC HDMI TX interrupt. - -- clocks: References to all the clocks specified in the clock-names property - as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt. - -- clock-names: The DWC HDMI TX uses the following clocks. - - - "iahb" is the bus clock for either AHB and APB (mandatory). - - "isfr" is the internal register configuration clock (mandatory). - - "cec" is the HDMI CEC controller main clock (optional). - -- ports: The connectivity of the DWC HDMI TX with the rest of the system is - expressed in using ports as specified in the device graph bindings defined - in Documentation/devicetree/bindings/graph.txt. The numbering of the ports - is platform-specific. diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml new file mode 100644 index 000000000000..735d0233a7d6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT8912B MIPI to HDMI Bridge + +maintainers: + - Adrien Grassein <adrien.grassein@gmail.com> + +description: | + The LT8912B is a bridge device which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt8912b + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI port for MIPI input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + HDMI port, should be connected to a node compatible with the + hdmi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912b"; + reg = <0x48>; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt deleted file mode 100644 index 3f6072651182..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ /dev/null @@ -1,88 +0,0 @@ -Renesas Gen3 DWC HDMI TX Encoder -================================ - -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with a companion PHY IP. - -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the -following device-specific properties. - - -Required properties: - -- compatible : Shall contain one or more of - - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX - - "renesas,r8a774b1-hdmi" for R8A774B1 (RZ/G2N) compatible HDMI TX - - "renesas,r8a774e1-hdmi" for R8A774E1 (RZ/G2H) compatible HDMI TX - - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX - - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX - - "renesas,r8a77961-hdmi" for R8A77961 (R-Car M3-W+) compatible HDMI TX - - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX - - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 and RZ/G2 compatible - HDMI TX - - When compatible with generic versions, nodes must list the SoC-specific - version corresponding to the platform first, followed by the - family-specific version. - -- reg: See dw_hdmi.txt. -- interrupts: HDMI interrupt number -- clocks: See dw_hdmi.txt. -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. -- ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0 - corresponding to the video input of the controller and one port numbered 1 - corresponding to its HDMI output, and one port numbered 2 corresponding to - sound input of the controller. Each port shall have a single endpoint. - -Optional properties: - -- power-domains: Shall reference the power domain that contains the DWC HDMI, - if any. - - -Example: - - hdmi0: hdmi@fead0000 { - compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; - reg = <0 0xfead0000 0 0x10000>; - interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; - clock-names = "iahb", "isfr"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - dw_hdmi0_in: endpoint { - remote-endpoint = <&du_out_hdmi0>; - }; - }; - port@1 { - reg = <1>; - rcar_dw_hdmi0_out: endpoint { - remote-endpoint = <&hdmi0_con>; - }; - }; - port@2 { - reg = <2>; - rcar_dw_hdmi0_sound_in: endpoint { - remote-endpoint = <&hdmi_sound_out>; - }; - }; - }; - }; - - hdmi0-out { - compatible = "hdmi-connector"; - label = "HDMI0 OUT"; - type = "a"; - - port { - hdmi0_con: endpoint { - remote-endpoint = <&rcar_dw_hdmi0_out>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml new file mode 100644 index 000000000000..0c9785c8db51 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car DWC HDMI TX Encoder + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP + with a companion PHY IP. + +allOf: + - $ref: synopsys,dw-hdmi.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r8a774a1-hdmi # for RZ/G2M compatible HDMI TX + - renesas,r8a774b1-hdmi # for RZ/G2N compatible HDMI TX + - renesas,r8a774e1-hdmi # for RZ/G2H compatible HDMI TX + - renesas,r8a7795-hdmi # for R-Car H3 compatible HDMI TX + - renesas,r8a7796-hdmi # for R-Car M3-W compatible HDMI TX + - renesas,r8a77961-hdmi # for R-Car M3-W+ compatible HDMI TX + - renesas,r8a77965-hdmi # for R-Car M3-N compatible HDMI TX + - const: renesas,rcar-gen3-hdmi + + reg-io-width: + const: 1 + + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI output port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Sound input port + + required: + - port@0 + - port@1 + - port@2 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + hdmi@fead0000 { + compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; + reg = <0xfead0000 0x10000>; + interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + port@2 { + reg = <2>; + rcar_dw_hdmi0_sound_in: endpoint { + remote-endpoint = <&hdmi_sound_out>; + }; + }; + }; + }; + + hdmi0-out { + compatible = "hdmi-connector"; + label = "HDMI0 OUT"; + type = "a"; + + port { + hdmi0_con: endpoint { + remote-endpoint = <&rcar_dw_hdmi0_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml new file mode 100644 index 000000000000..9be44a682e67 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/synopsys,dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Synopsys DesignWare HDMI TX Controller + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + This document defines device tree properties for the Synopsys DesignWare HDMI + TX controller (DWC HDMI TX) IP core. It doesn't constitute a full device tree + binding specification by itself but is meant to be referenced by device tree + bindings for the platform-specific integrations of the DWC HDMI TX. + + When referenced from platform device tree bindings the properties defined in + this document are defined as follows. The platform device tree bindings are + responsible for defining whether each property is required or optional. + +properties: + reg: + maxItems: 1 + + reg-io-width: + description: + Width (in bytes) of the registers specified by the reg property. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 4] + default: 1 + + clocks: + minItems: 2 + maxItems: 5 + items: + - description: The bus clock for either AHB and APB + - description: The internal register configuration clock + additionalItems: true + + clock-names: + minItems: 2 + maxItems: 5 + items: + - const: iahb + - const: isfr + additionalItems: true + + interrupts: + maxItems: 1 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml new file mode 100644 index 000000000000..a4c3064c778c --- /dev/null +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/fsl,lcdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale/NXP i.MX LCD Interface (LCDIF) + +maintainers: + - Marek Vasut <marex@denx.de> + - Stefan Agner <stefan@agner.ch> + +description: | + (e)LCDIF display controller found in the Freescale/NXP i.MX SoCs. + +properties: + compatible: + oneOf: + - enum: + - fsl,imx23-lcdif + - fsl,imx28-lcdif + - fsl,imx6sx-lcdif + - items: + - enum: + - fsl,imx6sl-lcdif + - fsl,imx6sll-lcdif + - fsl,imx6ul-lcdif + - fsl,imx7d-lcdif + - fsl,imx8mm-lcdif + - fsl,imx8mq-lcdif + - const: fsl,imx6sx-lcdif + + reg: + maxItems: 1 + + clocks: + items: + - description: Pixel clock + - description: Bus clock + - description: Display AXI clock + minItems: 1 + + clock-names: + items: + - const: pix + - const: axi + - const: disp_axi + minItems: 1 + + interrupts: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: The LCDIF output port + +required: + - compatible + - reg + - clocks + - interrupts + - port + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx6sx-lcdif + then: + properties: + clocks: + minItems: 2 + maxItems: 3 + clock-names: + minItems: 2 + maxItems: 3 + required: + - clock-names + else: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + +examples: + - | + #include <dt-bindings/clock/imx6sx-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + display-controller@2220000 { + compatible = "fsl,imx6sx-lcdif"; + reg = <0x02220000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + + port { + endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml new file mode 100644 index 000000000000..af7fe9c4d196 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx6-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 DWC HDMI TX Encoder + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP + with a companion PHY IP. + +allOf: + - $ref: ../bridge/synopsys,dw-hdmi.yaml# + +properties: + compatible: + enum: + - fsl,imx6dl-hdmi + - fsl,imx6q-hdmi + + reg-io-width: + const: 1 + + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + + ddc-i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The HDMI DDC bus can be connected to either a system I2C master or the + functionally-reduced I2C master contained in the DWC HDMI. When connected + to a system I2C master this property contains a phandle to that I2C + master controller. + + gpr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the iomuxc-gpr region containing the HDMI multiplexer control + register. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + This device has four video ports, corresponding to the four inputs of the + HDMI multiplexer. Each port shall have a single endpoint. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: First input of the HDMI multiplexer + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Second input of the HDMI multiplexer + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Third input of the HDMI multiplexer + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Fourth input of the HDMI multiplexer + + anyOf: + - required: + - port@0 + - required: + - port@1 + - required: + - port@2 + - required: + - port@3 + +required: + - compatible + - reg + - clocks + - clock-names + - gpr + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + + hdmi: hdmi@120000 { + reg = <0x00120000 0x9000>; + interrupts = <0 115 0x04>; + gpr = <&gpr>; + clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>, + <&clks IMX6QDL_CLK_HDMI_ISFR>; + clock-names = "iahb", "isfr"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_hdmi>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_hdmi>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt deleted file mode 100644 index 6d021e71c9cf..000000000000 --- a/Documentation/devicetree/bindings/display/imx/hdmi.txt +++ /dev/null @@ -1,65 +0,0 @@ -Freescale i.MX6 DWC HDMI TX Encoder -=================================== - -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with a companion PHY IP. - -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the -following device-specific properties. - - -Required properties: - -- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi". -- reg: See dw_hdmi.txt. -- interrupts: HDMI interrupt number -- clocks: See dw_hdmi.txt. -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. -- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports, - numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer. - Each port shall have a single endpoint. -- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI - multiplexer control register. - -Optional properties - -- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master - or the functionally-reduced I2C master contained in the DWC HDMI. When - connected to a system I2C master this property contains a phandle to that - I2C master controller. - - -Example: - - gpr: iomuxc-gpr@20e0000 { - /* ... */ - }; - - hdmi: hdmi@120000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-hdmi"; - reg = <0x00120000 0x9000>; - interrupts = <0 115 0x04>; - gpr = <&gpr>; - clocks = <&clks 123>, <&clks 124>; - clock-names = "iahb", "isfr"; - ddc-i2c-bus = <&i2c2>; - - port@0 { - reg = <0>; - - hdmi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_hdmi>; - }; - }; - - port@1 { - reg = <1>; - - hdmi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_hdmi>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt index 93b160df3eec..fbb59c9ddda6 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt @@ -64,7 +64,7 @@ Required properties (DMA function blocks): - larb: Should contain a phandle pointing to the local arbiter device as defined in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml - iommus: Should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. Optional properties (RDMA function blocks): diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml index 6cdb734c91a9..dd2896a40ff0 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml @@ -22,6 +22,7 @@ properties: - mediatek,mt7623-dpi - mediatek,mt8173-dpi - mediatek,mt8183-dpi + - mediatek,mt8192-dpi reg: maxItems: 1 @@ -50,15 +51,10 @@ properties: - const: sleep port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - Output port node with endpoint definitions as described in - Documentation/devicetree/bindings/graph.txt. This port should be connected - to the input port of an attached HDMI or LVDS encoder chip. - - properties: - endpoint: - type: object + Output port node. This port should be connected to the input port of an + attached HDMI or LVDS encoder chip. required: - compatible diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt index 551ae26f60da..586e6eac5b08 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt @@ -2,14 +2,14 @@ Qualcomm Technologies, Inc. DPU KMS Description: -Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates +Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like DPU display controller, DSI and DP interfaces etc. The DPU display controller is found in SDM845 SoC. MDSS: Required properties: - compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss" -- reg: physical base address and length of contoller's registers. +- reg: physical base address and length of controller's registers. - reg-names: register region names. The following region is required: * "mdss" - power-domains: a power domain consumer specifier according to diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt deleted file mode 100644 index c985871c46b3..000000000000 --- a/Documentation/devicetree/bindings/display/mxsfb.txt +++ /dev/null @@ -1,87 +0,0 @@ -* Freescale MXS LCD Interface (LCDIF) - -New bindings: -============= -Required properties: -- compatible: Should be "fsl,imx23-lcdif" for i.MX23. - Should be "fsl,imx28-lcdif" for i.MX28. - Should be "fsl,imx6sx-lcdif" for i.MX6SX. - Should be "fsl,imx8mq-lcdif" for i.MX8MQ. -- reg: Address and length of the register set for LCDIF -- interrupts: Should contain LCDIF interrupt -- clocks: A list of phandle + clock-specifier pairs, one for each - entry in 'clock-names'. -- clock-names: A list of clock names. For MXSFB it should contain: - - "pix" for the LCDIF block clock - - (MX6SX-only) "axi", "disp_axi" for the bus interface clock - -Required sub-nodes: - - port: The connection to an encoder chip. - -Example: - - lcdif1: display-controller@2220000 { - compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; - reg = <0x02220000 0x4000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, - <&clks IMX6SX_CLK_LCDIF_APB>, - <&clks IMX6SX_CLK_DISPLAY_AXI>; - clock-names = "pix", "axi", "disp_axi"; - - port { - parallel_out: endpoint { - remote-endpoint = <&panel_in_parallel>; - }; - }; - }; - -Deprecated bindings: -==================== -Required properties: -- compatible: Should be "fsl,imx23-lcdif" for i.MX23. - Should be "fsl,imx28-lcdif" for i.MX28. -- reg: Address and length of the register set for LCDIF -- interrupts: Should contain LCDIF interrupts -- display: phandle to display node (see below for details) - -* display node - -Required properties: -- bits-per-pixel: <16> for RGB565, <32> for RGB888/666. -- bus-width: number of data lines. Could be <8>, <16>, <18> or <24>. - -Required sub-node: -- display-timings: Refer to binding doc display-timing.txt for details. - -Examples: - -lcdif@80030000 { - compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; - interrupts = <38 86>; - - display: display { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <164>; - hback-porch = <89>; - hsync-len = <10>; - vback-porch = <23>; - vfront-porch = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml index 6960036975fa..c45c92a3d41f 100644 --- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml @@ -47,7 +47,6 @@ examples: spi-max-frequency = <3125000>; spi-3wire; - spi-cs-high; reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml index 0cd74c8dab42..dae0676b5c6e 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml @@ -40,7 +40,7 @@ additionalProperties: false examples: - | panel { - compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + compatible = "startek,startek-kd050c", "panel-dpi"; label = "osddisplay"; power-supply = <&vcc_supply>; backlight = <&backlight>; diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 62b0d54d87b7..b3797ba2698b 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -161,6 +161,8 @@ properties: # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel - innolux,g121x1-l03 # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel + - innolux,n116bca-ea1 + # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel - innolux,n116bge # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel - innolux,n125hce-gn1 diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt deleted file mode 100644 index 7d65c24fcda8..000000000000 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ /dev/null @@ -1,145 +0,0 @@ -* Renesas R-Car Display Unit (DU) - -Required Properties: - - - compatible: must be one of the following. - - "renesas,du-r8a7742" for R8A7742 (RZ/G1H) compatible DU - - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU - - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU - - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU - - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU - - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU - - "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU - - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU - - "renesas,du-r8a774e1" for R8A774E1 (RZ/G2H) compatible DU - - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU - - "renesas,du-r8a7792" for R8A7792 (R-Car V2H) compatible DU - - "renesas,du-r8a7793" for R8A7793 (R-Car M2-N) compatible DU - - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU - - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU - - "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU - - "renesas,du-r8a77961" for R8A77961 (R-Car M3-W+) compatible DU - - "renesas,du-r8a77965" for R8A77965 (R-Car M3-N) compatible DU - - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU - - "renesas,du-r8a77980" for R8A77980 (R-Car V3H) compatible DU - - "renesas,du-r8a77990" for R8A77990 (R-Car E3) compatible DU - - "renesas,du-r8a77995" for R8A77995 (R-Car D3) compatible DU - - - reg: the memory-mapped I/O registers base address and length - - - interrupts: Interrupt specifiers for the DU interrupts. - - - clocks: A list of phandles + clock-specifier pairs, one for each entry in - the clock-names property. - - clock-names: Name of the clocks. This property is model-dependent. - - R8A7779 uses a single functional clock. The clock doesn't need to be - named. - - All other DU instances use one functional clock per channel The - functional clocks must be named "du.x" with "x" being the channel - numerical index. - - In addition to the functional clocks, all DU versions also support - externally supplied pixel clocks. Those clocks are optional. When - supplied they must be named "dclkin.x" with "x" being the input clock - numerical index. - - - renesas,cmms: A list of phandles to the CMM instances present in the SoC, - one for each available DU channel. The property shall not be specified for - SoCs that do not provide any CMM (such as V3M and V3H). - - - renesas,vsps: A list of phandle and channel index tuples to the VSPs that - handle the memory interfaces for the DU channels. The phandle identifies the - VSP instance that serves the DU channel, and the channel index identifies - the LIF instance in that VSP. - -Optional properties: - - resets: A list of phandle + reset-specifier pairs, one for each entry in - the reset-names property. - - reset-names: Names of the resets. This property is model-dependent. - - All but R8A7779 use one reset for a group of one or more successive - channels. The resets must be named "du.x" with "x" being the numerical - index of the lowest channel in the group. - -Required nodes: - -The connections to the DU output video ports are modeled using the OF graph -bindings specified in Documentation/devicetree/bindings/graph.txt. - -The following table lists for each supported model the port number -corresponding to each DU output. - - Port0 Port1 Port2 Port3 ------------------------------------------------------------------------------ - R8A7742 (RZ/G1H) DPAD 0 LVDS 0 LVDS 1 - - R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - - - R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - - R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - - R8A774A1 (RZ/G2M) DPAD 0 HDMI 0 LVDS 0 - - R8A774B1 (RZ/G2N) DPAD 0 HDMI 0 LVDS 0 - - R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 - - R8A774E1 (RZ/G2H) DPAD 0 HDMI 0 LVDS 0 - - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - - R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - - R8A7792 (R-Car V2H) DPAD 0 DPAD 1 - - - R8A7793 (R-Car M2-N) DPAD 0 LVDS 0 - - - R8A7794 (R-Car E2) DPAD 0 DPAD 1 - - - R8A7795 (R-Car H3) DPAD 0 HDMI 0 HDMI 1 LVDS 0 - R8A7796 (R-Car M3-W) DPAD 0 HDMI 0 LVDS 0 - - R8A77961 (R-Car M3-W+) DPAD 0 HDMI 0 LVDS 0 - - R8A77965 (R-Car M3-N) DPAD 0 HDMI 0 LVDS 0 - - R8A77970 (R-Car V3M) DPAD 0 LVDS 0 - - - R8A77980 (R-Car V3H) DPAD 0 LVDS 0 - - - R8A77990 (R-Car E3) DPAD 0 LVDS 0 LVDS 1 - - R8A77995 (R-Car D3) DPAD 0 LVDS 0 LVDS 1 - - - -Example: R8A7795 (R-Car H3) ES2.0 DU - - du: display@feb00000 { - compatible = "renesas,du-r8a7795"; - reg = <0 0xfeb00000 0 0x80000>; - interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 721>; - clock-names = "du.0", "du.1", "du.2", "du.3"; - resets = <&cpg 724>, <&cpg 722>; - reset-names = "du.0", "du.2"; - renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>; - renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - du_out_rgb: endpoint { - }; - }; - port@1 { - reg = <1>; - du_out_hdmi0: endpoint { - remote-endpoint = <&dw_hdmi0_in>; - }; - }; - port@2 { - reg = <2>; - du_out_hdmi1: endpoint { - remote-endpoint = <&dw_hdmi1_in>; - }; - }; - port@3 { - reg = <3>; - du_out_lvds0: endpoint { - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml new file mode 100644 index 000000000000..121596f106da --- /dev/null +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml @@ -0,0 +1,834 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/renesas,du.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Display Unit (DU) + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + These DT bindings describe the Display Unit embedded in the Renesas R-Car + Gen1, R-Car Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs. + +properties: + compatible: + enum: + - renesas,du-r8a7742 # for RZ/G1H compatible DU + - renesas,du-r8a7743 # for RZ/G1M compatible DU + - renesas,du-r8a7744 # for RZ/G1N compatible DU + - renesas,du-r8a7745 # for RZ/G1E compatible DU + - renesas,du-r8a77470 # for RZ/G1C compatible DU + - renesas,du-r8a774a1 # for RZ/G2M compatible DU + - renesas,du-r8a774b1 # for RZ/G2N compatible DU + - renesas,du-r8a774c0 # for RZ/G2E compatible DU + - renesas,du-r8a774e1 # for RZ/G2H compatible DU + - renesas,du-r8a7779 # for R-Car H1 compatible DU + - renesas,du-r8a7790 # for R-Car H2 compatible DU + - renesas,du-r8a7791 # for R-Car M2-W compatible DU + - renesas,du-r8a7792 # for R-Car V2H compatible DU + - renesas,du-r8a7793 # for R-Car M2-N compatible DU + - renesas,du-r8a7794 # for R-Car E2 compatible DU + - renesas,du-r8a7795 # for R-Car H3 compatible DU + - renesas,du-r8a7796 # for R-Car M3-W compatible DU + - renesas,du-r8a77961 # for R-Car M3-W+ compatible DU + - renesas,du-r8a77965 # for R-Car M3-N compatible DU + - renesas,du-r8a77970 # for R-Car V3M compatible DU + - renesas,du-r8a77980 # for R-Car V3H compatible DU + - renesas,du-r8a77990 # for R-Car E3 compatible DU + - renesas,du-r8a77995 # for R-Car D3 compatible DU + + reg: + maxItems: 1 + + # See compatible-specific constraints below. + clocks: true + clock-names: true + interrupts: + description: Interrupt specifiers, one per DU channel + resets: true + reset-names: true + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/port + description: | + The connections to the DU output video ports are modeled using the OF + graph bindings specified in Documentation/devicetree/bindings/graph.txt. + The number of ports and their assignment are model-dependent. Each port + shall have a single endpoint. + + patternProperties: + "^port@[0-3]$": + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + + required: + - port@0 + - port@1 + + unevaluatedProperties: false + + renesas,cmms: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: + A list of phandles to the CMM instances present in the SoC, one for each + available DU channel. + + renesas,vsps: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: + A list of phandle and channel index tuples to the VSPs that handle the + memory interfaces for the DU channels. The phandle identifies the VSP + instance that serves the DU channel, and the channel index identifies + the LIF instance in that VSP. + +required: + - compatible + - reg + - clocks + - interrupts + - resets + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: renesas,du-r8a7779 + then: + properties: + clocks: + minItems: 1 + maxItems: 3 + items: + - description: Functional clock + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 1 + maxItems: 3 + items: + - const: du.0 + - pattern: '^dclkin\.[01]$' + - pattern: '^dclkin\.[01]$' + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: DPAD 1 + # port@2 is TCON, not supported yet + port@2: false + port@3: false + + required: + - port@0 + - port@1 + + required: + - interrupts + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a7743 + - renesas,du-r8a7744 + - renesas,du-r8a7791 + - renesas,du-r8a7793 + then: + properties: + clocks: + minItems: 2 + maxItems: 4 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: du.0 + - const: du.1 + - pattern: '^dclkin\.[01]$' + - pattern: '^dclkin\.[01]$' + + interrupts: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: LVDS 0 + # port@2 is TCON, not supported yet + port@2: false + port@3: false + + required: + - port@0 + - port@1 + + required: + - clock-names + - interrupts + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a7745 + - renesas,du-r8a7792 + then: + properties: + clocks: + minItems: 2 + maxItems: 4 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: du.0 + - const: du.1 + - pattern: '^dclkin\.[01]$' + - pattern: '^dclkin\.[01]$' + + interrupts: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: DPAD 1 + port@2: false + port@3: false + + required: + - port@0 + - port@1 + + required: + - clock-names + - interrupts + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a7794 + then: + properties: + clocks: + minItems: 2 + maxItems: 4 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: du.0 + - const: du.1 + - pattern: '^dclkin\.[01]$' + - pattern: '^dclkin\.[01]$' + + interrupts: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: DPAD 1 + # port@2 is TCON, not supported yet + port@2: false + port@3: false + + required: + - port@0 + - port@1 + + required: + - clock-names + - interrupts + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a77470 + then: + properties: + clocks: + minItems: 2 + maxItems: 4 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: du.0 + - const: du.1 + - pattern: '^dclkin\.[01]$' + - pattern: '^dclkin\.[01]$' + + interrupts: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: DPAD 1 + port@2: + description: LVDS 0 + # port@3 is DVENC, not supported yet + port@3: false + + required: + - port@0 + - port@1 + - port@2 + + required: + - clock-names + - interrupts + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a7742 + - renesas,du-r8a7790 + then: + properties: + clocks: + minItems: 3 + maxItems: 6 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: Functional clock for DU2 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + - description: DU_DOTCLKIN2 input clock + + clock-names: + minItems: 3 + maxItems: 6 + items: + - const: du.0 + - const: du.1 + - const: du.2 + - pattern: '^dclkin\.[012]$' + - pattern: '^dclkin\.[012]$' + - pattern: '^dclkin\.[012]$' + + interrupts: + maxItems: 3 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: LVDS 0 + port@2: + description: LVDS 1 + # port@3 is TCON, not supported yet + port@3: false + + required: + - port@0 + - port@1 + - port@2 + + required: + - clock-names + - interrupts + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a7795 + then: + properties: + clocks: + minItems: 4 + maxItems: 8 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: Functional clock for DU2 + - description: Functional clock for DU4 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + - description: DU_DOTCLKIN2 input clock + - description: DU_DOTCLKIN3 input clock + + clock-names: + minItems: 4 + maxItems: 8 + items: + - const: du.0 + - const: du.1 + - const: du.2 + - const: du.3 + - pattern: '^dclkin\.[0123]$' + - pattern: '^dclkin\.[0123]$' + - pattern: '^dclkin\.[0123]$' + - pattern: '^dclkin\.[0123]$' + + interrupts: + maxItems: 4 + + resets: + maxItems: 2 + + reset-names: + items: + - const: du.0 + - const: du.2 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: HDMI 0 + port@2: + description: HDMI 1 + port@3: + description: LVDS 0 + + required: + - port@0 + - port@1 + - port@2 + - port@3 + + renesas,cmms: + minItems: 4 + + renesas,vsps: + minItems: 4 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a774a1 + - renesas,du-r8a7796 + - renesas,du-r8a77961 + then: + properties: + clocks: + minItems: 3 + maxItems: 6 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: Functional clock for DU2 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + - description: DU_DOTCLKIN2 input clock + + clock-names: + minItems: 3 + maxItems: 6 + items: + - const: du.0 + - const: du.1 + - const: du.2 + - pattern: '^dclkin\.[012]$' + - pattern: '^dclkin\.[012]$' + - pattern: '^dclkin\.[012]$' + + interrupts: + maxItems: 3 + + resets: + maxItems: 2 + + reset-names: + items: + - const: du.0 + - const: du.2 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: HDMI 0 + port@2: + description: LVDS 0 + port@3: false + + required: + - port@0 + - port@1 + - port@2 + + renesas,cmms: + minItems: 3 + + renesas,vsps: + minItems: 3 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a774b1 + - renesas,du-r8a774e1 + - renesas,du-r8a77965 + then: + properties: + clocks: + minItems: 3 + maxItems: 6 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: Functional clock for DU3 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + - description: DU_DOTCLKIN3 input clock + + clock-names: + minItems: 3 + maxItems: 6 + items: + - const: du.0 + - const: du.1 + - const: du.3 + - pattern: '^dclkin\.[013]$' + - pattern: '^dclkin\.[013]$' + - pattern: '^dclkin\.[013]$' + + interrupts: + maxItems: 3 + + resets: + maxItems: 2 + + reset-names: + items: + - const: du.0 + - const: du.3 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: HDMI 0 + port@2: + description: LVDS 0 + port@3: false + + required: + - port@0 + - port@1 + - port@2 + + renesas,cmms: + minItems: 3 + + renesas,vsps: + minItems: 3 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a77970 + - renesas,du-r8a77980 + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + items: + - description: Functional clock for DU0 + - description: DU_DOTCLKIN0 input clock + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: du.0 + - const: dclkin.0 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: LVDS 0 + port@2: false + port@3: false + + required: + - port@0 + - port@1 + + renesas,vsps: + minItems: 1 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a774c0 + - renesas,du-r8a77990 + - renesas,du-r8a77995 + then: + properties: + clocks: + minItems: 2 + maxItems: 4 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: du.0 + - const: du.1 + - pattern: '^dclkin\.[01]$' + - pattern: '^dclkin\.[01]$' + + interrupts: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: LVDS 0 + port@2: + description: LVDS 1 + # port@3 is TCON, not supported yet + port@3: false + + required: + - port@0 + - port@1 + - port@2 + + renesas,cmms: + minItems: 2 + + renesas,vsps: + minItems: 2 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + +additionalProperties: false + +examples: + # R-Car H3 ES2.0 DU + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + display@feb00000 { + compatible = "renesas,du-r8a7795"; + reg = <0xfeb00000 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>; + clock-names = "du.0", "du.1", "du.2", "du.3"; + resets = <&cpg 724>, <&cpg 722>; + reset-names = "du.0", "du.2"; + + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dw_hdmi0_in>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dw_hdmi1_in>; + }; + }; + port@3 { + reg = <3>; + endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt deleted file mode 100644 index 3d32ce137e7f..000000000000 --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt +++ /dev/null @@ -1,74 +0,0 @@ -Rockchip DWC HDMI TX Encoder -============================ - -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with a companion PHY IP. - -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the -following device-specific properties. - - -Required properties: - -- compatible: should be one of the following: - "rockchip,rk3228-dw-hdmi" - "rockchip,rk3288-dw-hdmi" - "rockchip,rk3328-dw-hdmi" - "rockchip,rk3399-dw-hdmi" -- reg: See dw_hdmi.txt. -- reg-io-width: See dw_hdmi.txt. Shall be 4. -- interrupts: HDMI interrupt number -- clocks: See dw_hdmi.txt. -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. -- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0 - corresponding to the video input of the controller. The port shall have two - endpoints, numbered 0 and 1, connected respectively to the vopb and vopl. -- rockchip,grf: Shall reference the GRF to mux vopl/vopb. - -Optional properties - -- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master - or the functionally-reduced I2C master contained in the DWC HDMI. When - connected to a system I2C master this property contains a phandle to that - I2C master controller. -- clock-names: See dw_hdmi.txt. The "cec" clock is optional. -- clock-names: May contain "cec" as defined in dw_hdmi.txt. -- clock-names: May contain "grf", power for grf io. -- clock-names: May contain "vpll", external clock for some hdmi phy. -- phys: from general PHY binding: the phandle for the PHY device. -- phy-names: Should be "hdmi" if phys references an external phy. - -Optional pinctrl entry: -- If you have both a "unwedge" and "default" pinctrl entry, dw_hdmi - will switch to the unwedge pinctrl state for 10ms if it ever gets an - i2c timeout. It's intended that this unwedge pinctrl entry will - cause the SDA line to be driven low to work around a hardware - errata. - -Example: - -hdmi: hdmi@ff980000 { - compatible = "rockchip,rk3288-dw-hdmi"; - reg = <0xff980000 0x20000>; - reg-io-width = <4>; - ddc-i2c-bus = <&i2c5>; - rockchip,grf = <&grf>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; - clock-names = "iahb", "isfr"; - ports { - hdmi_in: port { - #address-cells = <1>; - #size-cells = <0>; - hdmi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_hdmi>; - }; - hdmi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_hdmi>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml new file mode 100644 index 000000000000..75cd9c686e98 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip DWC HDMI TX Encoder + +maintainers: + - Mark Yao <markyao0591@gmail.com> + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP + with a companion PHY IP. + +allOf: + - $ref: ../bridge/synopsys,dw-hdmi.yaml# + +properties: + compatible: + enum: + - rockchip,rk3228-dw-hdmi + - rockchip,rk3288-dw-hdmi + - rockchip,rk3328-dw-hdmi + - rockchip,rk3399-dw-hdmi + + reg-io-width: + const: 4 + + clocks: + minItems: 2 + maxItems: 5 + items: + - {} + - {} + # The next three clocks are all optional, but shall be specified in this + # order when present. + - description: The HDMI CEC controller main clock + - description: Power for GRF IO + - description: External clock for some HDMI PHY + + clock-names: + minItems: 2 + maxItems: 5 + items: + - {} + - {} + - enum: + - cec + - grf + - vpll + - enum: + - grf + - vpll + - const: vpll + + ddc-i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The HDMI DDC bus can be connected to either a system I2C master or the + functionally-reduced I2C master contained in the DWC HDMI. When connected + to a system I2C master this property contains a phandle to that I2C + master controller. + + phys: + maxItems: 1 + description: The HDMI PHY + + phy-names: + const: hdmi + + pinctrl-names: + description: + The unwedge pinctrl entry shall drive the DDC SDA line low. This is + intended to work around a hardware errata that can cause the DDC I2C + bus to be wedged. + items: + - const: default + - const: unwedge + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Input of the DWC HDMI TX + + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Connection to the VOPB + + endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Connection to the VOPL + + required: + - endpoint@0 + - endpoint@1 + + required: + - port + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the GRF to mux vopl/vopb. + +required: + - compatible + - reg + - reg-io-width + - clocks + - clock-names + - interrupts + - ports + - rockchip,grf + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + hdmi: hdmi@ff980000 { + compatible = "rockchip,rk3288-dw-hdmi"; + reg = <0xff980000 0x20000>; + reg-io-width = <4>; + ddc-i2c-bus = <&i2c5>; + rockchip,grf = <&grf>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; + clock-names = "iahb", "isfr"; + + ports { + port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_hdmi>; + }; + hdmi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_hdmi>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml index eaf8c54fcf50..c2499a7906f5 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml @@ -54,6 +54,7 @@ properties: compatible: items: - enum: + - apple,simple-framebuffer - allwinner,simple-framebuffer - amlogic,simple-framebuffer - const: simple-framebuffer @@ -84,9 +85,13 @@ properties: Format of the framebuffer: * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b + * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b + * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b enum: - a8b8g8r8 - r5g6b5 + - x2r10g10b10 + - x8r8g8b8 display: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml index f8142adf9aea..e302147e53c6 100644 --- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml +++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml @@ -20,6 +20,7 @@ properties: compatible: enum: - qcom,sdm845-gpi-dma + - qcom,sm8150-gpi-dma reg: maxItems: 1 @@ -64,7 +65,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/dma/qcom-gpi.h> gpi_dma0: dma-controller@800000 { - compatible = "qcom,gpi-dma"; + compatible = "qcom,sdm845-gpi-dma"; #dma-cells = <3>; reg = <0x00800000 0x60000>; iommus = <&apps_smmu 0x0016 0x0>; diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt deleted file mode 100644 index 35383adb10f1..000000000000 --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt +++ /dev/null @@ -1,41 +0,0 @@ -Qualcomm's PM8941 USB ID Extcon device - -Some Qualcomm PMICs have a "misc" module that can be used to detect when -the USB ID pin has been pulled low or high. - -PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: Should contain "qcom,pm8941-misc"; - -- reg: - Usage: required - Value type: <u32> - Definition: Should contain the offset to the misc address space - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: Should contain the usb id interrupt - -- interrupt-names: - Usage: required - Value type: <stringlist> - Definition: Should contain the string "usb_id" for the usb id interrupt - -Example: - - pmic { - usb_id: misc@900 { - compatible = "qcom,pm8941-misc"; - reg = <0x900>; - interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "usb_id"; - }; - } - - usb-controller { - extcon = <&usb_id>; - }; diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml new file mode 100644 index 000000000000..6a9c96f0352a --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device + +maintainers: + - Guru Das Srinagesh <gurus@codeaurora.org> + +description: | + Some Qualcomm PMICs have a "misc" module that can be used to detect when + the USB ID pin has been pulled low or high. + +properties: + compatible: + items: + - const: qcom,pm8941-misc + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - const: usb_id + - const: usb_vbus + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + pmic { + #address-cells = <1>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + + usb_id: misc@900 { + compatible = "qcom,pm8941-misc"; + reg = <0x900>; + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_id"; + }; + }; + + usb-controller { + extcon = <&usb_id>; + }; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index a884955f861e..e747d73687cb 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -20,7 +20,9 @@ Required properties: * "qcom,scm-msm8996" * "qcom,scm-msm8998" * "qcom,scm-sc7180" + * "qcom,scm-sc7280" * "qcom,scm-sdm845" + * "qcom,scm-sdx55" * "qcom,scm-sm8150" * "qcom,scm-sm8250" * "qcom,scm-sm8350" diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt index e811cf825019..d787d57491a1 100644 --- a/Documentation/devicetree/bindings/fpga/fpga-region.txt +++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt @@ -245,36 +245,31 @@ Base tree contains: Overlay contains: -/dts-v1/ /plugin/; -/ { - fragment@0 { - target = <&fpga_region0>; - #address-cells = <1>; - #size-cells = <1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <1>; - - firmware-name = "soc_system.rbf"; - fpga-bridges = <&fpga_bridge1>; - ranges = <0x20000 0xff200000 0x100000>, - <0x0 0xc0000000 0x20000000>; - - gpio@10040 { - compatible = "altr,pio-1.0"; - reg = <0x10040 0x20>; - altr,ngpio = <4>; - #gpio-cells = <2>; - clocks = <2>; - gpio-controller; - }; - - onchip-memory { - device_type = "memory"; - compatible = "altr,onchipmem-15.1"; - reg = <0x0 0x10000>; - }; - }; +/dts-v1/; +/plugin/; + +&fpga_region0 { + #address-cells = <1>; + #size-cells = <1>; + + firmware-name = "soc_system.rbf"; + fpga-bridges = <&fpga_bridge1>; + ranges = <0x20000 0xff200000 0x100000>, + <0x0 0xc0000000 0x20000000>; + + gpio@10040 { + compatible = "altr,pio-1.0"; + reg = <0x10040 0x20>; + altr,ngpio = <4>; + #gpio-cells = <2>; + clocks = <2>; + gpio-controller; + }; + + onchip-memory { + device_type = "memory"; + compatible = "altr,onchipmem-15.1"; + reg = <0x0 0x10000>; }; }; @@ -371,25 +366,22 @@ Live Device Tree contains: }; DT Overlay contains: -/dts-v1/ /plugin/; -/ { -fragment@0 { - target = <&fpga_region0>; + +/dts-v1/; +/plugin/; + +&fpga_region0 { #address-cells = <1>; #size-cells = <1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <1>; - firmware-name = "zynq-gpio.bin"; + firmware-name = "zynq-gpio.bin"; - gpio1: gpio@40000000 { - compatible = "xlnx,xps-gpio-1.00.a"; - reg = <0x40000000 0x10000>; - gpio-controller; - #gpio-cells = <0x2>; - xlnx,gpio-width= <0x6>; - }; + gpio1: gpio@40000000 { + compatible = "xlnx,xps-gpio-1.00.a"; + reg = <0x40000000 0x10000>; + gpio-controller; + #gpio-cells = <0x2>; + xlnx,gpio-width= <0x6>; }; }; @@ -402,41 +394,37 @@ This example programs the FPGA to have two regions that can later be partially configured. Each region has its own bridge in the FPGA fabric. DT Overlay contains: -/dts-v1/ /plugin/; -/ { - fragment@0 { - target = <&fpga_region0>; - #address-cells = <1>; - #size-cells = <1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <1>; - - firmware-name = "base.rbf"; - - fpga-bridge@4400 { - compatible = "altr,freeze-bridge-controller"; - reg = <0x4400 0x10>; - - fpga_region1: fpga-region1 { - compatible = "fpga-region"; - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - }; - }; - - fpga-bridge@4420 { - compatible = "altr,freeze-bridge-controller"; - reg = <0x4420 0x10>; - - fpga_region2: fpga-region2 { - compatible = "fpga-region"; - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - }; - }; + +/dts-v1/; +/plugin/; + +&fpga_region0 { + #address-cells = <1>; + #size-cells = <1>; + + firmware-name = "base.rbf"; + + fpga-bridge@4400 { + compatible = "altr,freeze-bridge-controller"; + reg = <0x4400 0x10>; + + fpga_region1: fpga-region1 { + compatible = "fpga-region"; + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; + }; + }; + + fpga-bridge@4420 { + compatible = "altr,freeze-bridge-controller"; + reg = <0x4420 0x10>; + + fpga_region2: fpga-region2 { + compatible = "fpga-region"; + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; }; }; }; @@ -451,28 +439,23 @@ differences are that the FPGA is partially reconfigured due to the "partial-fpga-config" boolean and the only bridge that is controlled during programming is the FPGA based bridge of fpga_region1. -/dts-v1/ /plugin/; -/ { - fragment@0 { - target = <&fpga_region1>; - #address-cells = <1>; - #size-cells = <1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <1>; - - firmware-name = "soc_image2.rbf"; - partial-fpga-config; - - gpio@10040 { - compatible = "altr,pio-1.0"; - reg = <0x10040 0x20>; - clocks = <0x2>; - altr,ngpio = <0x4>; - #gpio-cells = <0x2>; - gpio-controller; - }; - }; +/dts-v1/; +/plugin/; + +&fpga_region1 { + #address-cells = <1>; + #size-cells = <1>; + + firmware-name = "soc_image2.rbf"; + partial-fpga-config; + + gpio@10040 { + compatible = "altr,pio-1.0"; + reg = <0x10040 0x20>; + clocks = <0x2>; + altr,ngpio = <0x4>; + #gpio-cells = <0x2>; + gpio-controller; }; }; diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt index 4284d293fa61..0acdfa6d62a4 100644 --- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt @@ -7,13 +7,24 @@ changes from passing through the bridge. The controller can also couple / enable the bridges which allows traffic to pass through the bridge normally. +Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager +Softcore is compatible with the Xilinx LogiCORE pr-decoupler. + +The Dynamic Function eXchange AXI shutdown manager prevents AXI traffic +from passing through the bridge. The controller safely handles AXI4MM +and AXI4-Lite interfaces on a Reconfigurable Partition when it is +undergoing dynamic reconfiguration, preventing the system deadlock +that can occur if AXI transactions are interrupted by DFX + The Driver supports only MMIO handling. A PR region can have multiple PR Decouplers which can be handled independently or chained via decouple/ decouple_status signals. Required properties: - compatible : Should contain "xlnx,pr-decoupler-1.00" followed by - "xlnx,pr-decoupler" + "xlnx,pr-decoupler" or + "xlnx,dfx-axi-shutdown-manager-1.00" followed by + "xlnx,dfx-axi-shutdown-manager" - regs : base address and size for decoupler module - clocks : input clock to IP - clock-names : should contain "aclk" @@ -22,6 +33,7 @@ See Documentation/devicetree/bindings/fpga/fpga-region.txt and Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings. Example: +Partial Reconfig Decoupler: fpga-bridge@100000450 { compatible = "xlnx,pr-decoupler-1.00", "xlnx-pr-decoupler"; @@ -30,3 +42,13 @@ Example: clock-names = "aclk"; bridge-enable = <0>; }; + +Dynamic Function eXchange AXI shutdown manager: + fpga-bridge@100000450 { + compatible = "xlnx,dfx-axi-shutdown-manager-1.00", + "xlnx,dfx-axi-shutdown-manager"; + regs = <0x10000045 0x10>; + clocks = <&clkc 15>; + clock-names = "aclk"; + bridge-enable = <0>; + }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt deleted file mode 100644 index e7853143fa42..000000000000 --- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt +++ /dev/null @@ -1,46 +0,0 @@ -Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers. - -These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345 -are the only ones which don't need a pinctrl driver. -BCM6338 have 8-bit data and dirout registers, where GPIO state can be read -and/or written, and the direction changed from input to output. -BCM6345 have 16-bit data and dirout registers, where GPIO state can be read -and/or written, and the direction changed from input to output. - -Required properties: - - compatible: should be "brcm,bcm6345-gpio" - - reg-names: must contain - "dat" - data register - "dirout" - direction (output) register - - reg: address + size pairs describing the GPIO register sets; - order must correspond with the order of entries in reg-names - - #gpio-cells: must be set to 2. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - - gpio-controller: Marks the device node as a gpio controller. - -Optional properties: - - native-endian: use native endian memory. - -Examples: - - BCM6338: - gpio: gpio-controller@fffe0407 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0xfffe0407 1>, <0xfffe040f 1>; - - #gpio-cells = <2>; - gpio-controller; - }; - - - BCM6345: - gpio: gpio-controller@fffe0406 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0xfffe0406 2>, <0xfffe040a 2>; - native-endian; - - #gpio-cells = <2>; - gpio-controller; - }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml new file mode 100644 index 000000000000..4d69f79df859 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6345 GPIO controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: |+ + Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers. + + These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345 + are the only ones which don't need a pinctrl driver. + + BCM6338 have 8-bit data and dirout registers, where GPIO state can be read + and/or written, and the direction changed from input to output. + BCM6345 have 16-bit data and dirout registers, where GPIO state can be read + and/or written, and the direction changed from input to output. + BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data + and dirout registers, where GPIO state can be read and/or written, and the + direction changed from input to output. + +properties: + compatible: + enum: + - brcm,bcm6318-gpio + - brcm,bcm6328-gpio + - brcm,bcm6345-gpio + - brcm,bcm6358-gpio + - brcm,bcm6362-gpio + - brcm,bcm6368-gpio + - brcm,bcm63268-gpio + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + maxItems: 1 + + native-endian: true + + reg: + maxItems: 2 + + reg-names: + items: + - const: dirout + - const: dat + +required: + - compatible + - reg + - reg-names + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + gpio@fffe0406 { + compatible = "brcm,bcm6345-gpio"; + reg-names = "dirout", "dat"; + reg = <0xfffe0406 2>, <0xfffe040a 2>; + native-endian; + + gpio-controller; + #gpio-cells = <2>; + }; + + - | + gpio@0 { + compatible = "brcm,bcm63268-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 52>; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml new file mode 100644 index 000000000000..5fe19fa5f67c --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/fairchild,74hc595.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic 8-bit shift register + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + enum: + - fairchild,74hc595 + - nxp,74lvc594 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The second cell is only used to specify the GPIO polarity. + const: 2 + + registers-number: + description: Number of daisy-chained shift registers + + enable-gpios: + description: GPIO connected to the OE (Output Enable) pin. + maxItems: 1 + + spi-max-frequency: true + +patternProperties: + "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$": + type: object + + properties: + gpio-hog: true + gpios: true + output-high: true + output-low: true + line-name: true + + required: + - gpio-hog + - gpios + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - registers-number + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + gpio5: gpio5@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <4>; + spi-max-frequency = <100000>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt deleted file mode 100644 index 2a97553d8d76..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Generic 8-bits shift register GPIO driver - -Required properties: -- compatible: Should contain one of the following: - "fairchild,74hc595" - "nxp,74lvc594" -- reg : chip select number -- gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -- registers-number: Number of daisy-chained shift registers - -Optional properties: -- enable-gpios: GPIO connected to the OE (Output Enable) pin. - -Example: - -gpio5: gpio5@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <4>; - spi-max-frequency = <100000>; -}; diff --git a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml new file mode 100644 index 000000000000..100f20cebd76 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/realtek,otto-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek Otto GPIO controller + +maintainers: + - Sander Vanheule <sander@svanheule.net> + - Bert Vermeulen <bert@biot.com> + +description: | + Realtek's GPIO controller on their MIPS switch SoCs (Otto platform) consists + of two banks of 32 GPIOs. These GPIOs can generate edge-triggered interrupts. + Each bank's interrupts are cascased into one interrupt line on the parent + interrupt controller, if provided. + This binding allows defining a single bank in the devicetree. The interrupt + controller is not supported on the fallback compatible name, which only + allows for GPIO port use. + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + items: + - enum: + - realtek,rtl8380-gpio + - realtek,rtl8390-gpio + - const: realtek,otto-gpio + + reg: + maxItems: 1 + + "#gpio-cells": + const: 2 + + gpio-controller: true + + ngpios: + minimum: 1 + maximum: 32 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - "#gpio-cells" + - gpio-controller + +additionalProperties: false + +dependencies: + interrupt-controller: [ interrupts ] + +examples: + - | + gpio@3500 { + compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio"; + reg = <0x3500 0x1c>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <24>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&rtlintc>; + interrupts = <23>; + }; + +... diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml new file mode 100644 index 000000000000..d993e002cebe --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/rockchip,gpio-bank.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip GPIO bank + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,gpio-bank + - rockchip,rk3188-gpio-bank0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + +required: + - compatible + - reg + - interrupts + - clocks + - gpio-controller + - "#gpio-cells" + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl: pinctrl { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio@2000a000 { + compatible = "rockchip,rk3188-gpio-bank0"; + reg = <0x2000a000 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 9>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2003c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003c000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 10>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml index 1a54db04f29d..bcafa494ed7a 100644 --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml @@ -43,8 +43,7 @@ properties: gpio-ranges: true - gpio-ranges-group-names: - $ref: /schemas/types.yaml#/definitions/string-array + gpio-ranges-group-names: true socionext,interrupt-ranges: description: | diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 184492162e7e..894ba217ab32 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -69,6 +69,8 @@ properties: where voltage is in V, frequency is in MHz. + dma-coherent: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt deleted file mode 100644 index 9bb1240a68e0..000000000000 --- a/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt +++ /dev/null @@ -1,28 +0,0 @@ -SIRF Hardware spinlock device Binding ------------------------------------------------ - -Required properties : -- compatible : shall contain only one of the following: - "sirf,hwspinlock" - -- reg : the register address of hwspinlock - -- #hwlock-cells : hwlock users only use the hwlock id to represent a specific - hwlock, so the number of cells should be <1> here. - -Please look at the generic hwlock binding for usage information for consumers, -"Documentation/devicetree/bindings/hwlock/hwlock.txt" - -Example of hwlock provider: - hwlock { - compatible = "sirf,hwspinlock"; - reg = <0x13240000 0x00010000>; - #hwlock-cells = <1>; - }; - -Example of hwlock users: - node { - ... - hwlocks = <&hwlock 2>; - ... - }; diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt index 37f18d684f6a..4c5c3712970e 100644 --- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt @@ -32,7 +32,7 @@ Optional node properties: - "#thermal-sensor-cells" Used to expose itself to thermal fw. Read more about iio bindings at - Documentation/devicetree/bindings/iio/iio-bindings.txt + https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/ Example: ncp15wb473@0 { diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml index ff99344788ab..fd040284561f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Bindings for GPIO bitbanged I2C maintainers: - - Wolfram Sang <wolfram@the-dreams.de> + - Wolfram Sang <wsa@kernel.org> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml index f23966b0d6c6..3592d49235e0 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX maintainers: - - Wolfram Sang <wolfram@the-dreams.de> + - Oleksij Rempel <o.rempel@pengutronix.de> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt deleted file mode 100644 index 42a390526957..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt +++ /dev/null @@ -1,62 +0,0 @@ -* I2C - -Required properties : - - - reg : Offset and length of the register set for the device - - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a - compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121, - mpc5200 or mpc5200b. For the mpc5121, an additional node - "fsl,mpc5121-i2c-ctrl" is required as shown in the example below. - -Recommended properties : - - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - fsl,preserve-clocking : boolean; if defined, the clock settings - from the bootloader are preserved (not touched). - - clock-frequency : desired I2C bus clock frequency in Hz. - - fsl,timeout : I2C bus timeout in microseconds. - -Examples : - - /* MPC5121 based board */ - i2c@1740 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5121-i2c", "fsl-i2c"; - reg = <0x1740 0x20>; - interrupts = <11 0x8>; - interrupt-parent = <&ipic>; - clock-frequency = <100000>; - }; - - i2ccontrol@1760 { - compatible = "fsl,mpc5121-i2c-ctrl"; - reg = <0x1760 0x8>; - }; - - /* MPC5200B based board */ - i2c@3d00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d00 0x40>; - interrupts = <2 15 0>; - interrupt-parent = <&mpc5200_pic>; - fsl,preserve-clocking; - }; - - /* MPC8544 base board */ - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8544-i2c", "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - clock-frequency = <400000>; - fsl,timeout = <10000>; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml new file mode 100644 index 000000000000..7b553d559c83 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C-Bus adapter for MPC824x/83xx/85xx/86xx/512x/52xx SoCs + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - mpc5200-i2c + - fsl,mpc5200-i2c + - fsl,mpc5121-i2c + - fsl,mpc8313-i2c + - fsl,mpc8543-i2c + - fsl,mpc8544-i2c + - const: fsl-i2c + - items: + - const: fsl,mpc5200b-i2c + - const: fsl,mpc5200-i2c + - const: fsl-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsl,preserve-clocking: + $ref: /schemas/types.yaml#/definitions/flag + description: | + if defined, the clock settings from the bootloader are + preserved (not touched) + + fsl,timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + I2C bus timeout in microseconds + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + /* MPC5121 based board */ + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1740 0x20>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <100000>; + }; + + /* MPC5200B based board */ + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c", "fsl,mpc5200-i2c", "fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + interrupt-parent = <&mpc5200_pic>; + fsl,preserve-clocking; + }; + + /* MPC8544 base board */ + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + clock-frequency = <400000>; + fsl,timeout = <10000>; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml index ffb2ed039a5e..715dcfa5a922 100644 --- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml +++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml @@ -4,7 +4,7 @@ $id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: ilinx IIC controller Device Tree Bindings +title: Xilinx IIC controller Device Tree Bindings maintainers: - info@mocean-labs.com diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt index 1cf6182f888c..3716589d6999 100644 --- a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt +++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt @@ -10,19 +10,19 @@ Required properties: - reg: I3C master registers Mandatory properties defined by the generic binding (see -Documentation/devicetree/bindings/i3c/i3c.txt for more details): +Documentation/devicetree/bindings/i3c/i3c.yaml for more details): - #address-cells: shall be set to 1 - #size-cells: shall be set to 0 Optional properties defined by the generic binding (see -Documentation/devicetree/bindings/i3c/i3c.txt for more details): +Documentation/devicetree/bindings/i3c/i3c.yaml for more details): - i2c-scl-hz - i3c-scl-hz I3C device connected on the bus follow the generic description (see -Documentation/devicetree/bindings/i3c/i3c.txt for more details). +Documentation/devicetree/bindings/i3c/i3c.yaml for more details). Example: diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml index 52042aa44d19..1f82fc923799 100644 --- a/Documentation/devicetree/bindings/i3c/i3c.yaml +++ b/Documentation/devicetree/bindings/i3c/i3c.yaml @@ -157,9 +157,10 @@ examples: i2c-scl-hz = <100000>; /* I2C device. */ - nunchuk: nunchuk@52 { - compatible = "nintendo,nunchuk"; - reg = <0x52 0x0 0x10>; + eeprom@57 { + compatible = "atmel,24c01"; + reg = <0x57 0x0 0x10>; + pagesize = <0x8>; }; /* I3C device with a static I2C address. */ diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml index adb5165505aa..62f3ca66274f 100644 --- a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml @@ -49,7 +49,7 @@ additionalProperties: true examples: - | i3c-master@a0000000 { - compatible = "silvaco,i3c-master"; + compatible = "silvaco,i3c-master-v1"; clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>; clock-names = "pclk", "fast_clk", "slow_clk"; interrupt-parent = <&gic>; diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt index 5020eb71eb8d..07f35f36085d 100644 --- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt @@ -9,19 +9,19 @@ Required properties: - reg: Offset and length of I3C master registers Mandatory properties defined by the generic binding (see -Documentation/devicetree/bindings/i3c/i3c.txt for more details): +Documentation/devicetree/bindings/i3c/i3c.yaml for more details): - #address-cells: shall be set to 3 - #size-cells: shall be set to 0 Optional properties defined by the generic binding (see -Documentation/devicetree/bindings/i3c/i3c.txt for more details): +Documentation/devicetree/bindings/i3c/i3c.yaml for more details): - i2c-scl-hz - i3c-scl-hz I3C device connected on the bus follow the generic description (see -Documentation/devicetree/bindings/i3c/i3c.txt for more details). +Documentation/devicetree/bindings/i3c/i3c.yaml for more details). Example: diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml new file mode 100644 index 000000000000..911a1ae9c83f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMI088 IMU accelerometer part + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +description: | + Acceleration part of the IMU sensor with an SPI interface + Specifications about the sensor can be found at: + https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf + +properties: + compatible: + enum: + - bosch,bmi088-accel + + reg: + maxItems: 1 + + spi-max-frequency: true + + vdd-supply: true + + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + description: | + Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW. + Two configurable interrupt lines exist. + + interrupt-names: + description: Specify which interrupt line is in use. + items: + enum: + - INT1 + - INT2 + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + bmi088-accel@1 { + compatible = "bosch,bmi088-accel"; + reg = <1>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio6>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT2"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml index c562d25bee3b..547697e8bc8b 100644 --- a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml @@ -53,11 +53,6 @@ examples: #address-cells = <1>; #size-cells = <1>; - ts_adc_syscon: ts_adc_syscon@180a6000 { - compatible = "brcm,iproc-ts-adc-syscon","syscon"; - reg = <0x180a6000 0xc30>; - }; - adc { compatible = "brcm,iproc-static-adc"; adc-syscon = <&ts_adc_syscon>; diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml index 9f414dbdae86..433a3fb55a2e 100644 --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml @@ -14,8 +14,9 @@ description: > Industrial I/O subsystem bindings for ADC controller found in Ingenic JZ47xx SoCs. - ADC clients must use the format described in iio-bindings.txt, giving - a phandle and IIO specifier pair ("io-channels") to the ADC controller. + ADC clients must use the format described in + https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml, + giving a phandle and IIO specifier pair ("io-channels") to the ADC controller. properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml index 5b21a9fba5dd..b939f9652e3a 100644 --- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml @@ -34,6 +34,7 @@ properties: - items: - enum: - mediatek,mt8183-auxadc + - mediatek,mt8195-auxadc - mediatek,mt8516-auxadc - const: mediatek,mt8173-auxadc diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml new file mode 100644 index 000000000000..e0670e3fbb72 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml @@ -0,0 +1,181 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads131e08.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs + +maintainers: + - Tomislav Denis <tomislav.denis@avl.com> + +description: | + The ADS131E0x are a family of multichannel, simultaneous sampling, + 24-bit, delta-sigma, analog-to-digital converters (ADCs) with a + built-in programmable gain amplifier (PGA), internal reference + and an onboard oscillator. + The communication with ADC chip is via the SPI bus (mode 1). + + https://www.ti.com/lit/ds/symlink/ads131e08.pdf + +properties: + compatible: + enum: + - ti,ads131e04 + - ti,ads131e06 + - ti,ads131e08 + + reg: + maxItems: 1 + + spi-max-frequency: true + + spi-cpha: true + + clocks: + description: | + Device tree identifier to the clock source (2.048 MHz). + Note: clock source is selected using CLKSEL pin. + maxItems: 1 + + clock-names: + items: + - const: adc-clk + + interrupts: + description: | + IRQ line for the ADC data ready. + maxItems: 1 + + vref-supply: + description: | + Optional external voltage reference. If not supplied, internal voltage + reference is used. + + ti,vref-internal: + description: | + Select the internal voltage reference value. + 0: 2.4V + 1: 4.0V + If this field is left empty, 2.4V is selected. + Note: internal voltage reference is used only if vref-supply is not supplied. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + - spi-cpha + - clocks + - clock-names + - interrupts + +patternProperties: + "^channel@([0-7])$": + $ref: "adc.yaml" + type: object + description: | + Represents the external channels which are connected to the ADC. + + properties: + reg: + description: | + The channel number. + Up to 4 channels, numbered from 0 to 3 for ti,ads131e04. + Up to 6 channels, numbered from 0 to 5 for ti,ads131e06. + Up to 8 channels, numbered from 0 to 7 for ti,ads131e08. + items: + minimum: 0 + maximum: 7 + + ti,gain: + description: | + The PGA gain value for the channel. + If this field is left empty, PGA gain 1 is used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 12] + default: 1 + + ti,mux: + description: | + Channel input selection(muliplexer). + 0: Normal input. + 1: Input shorted to (VREFP + VREFN) / 2 (for offset or noise measurements). + 3: MVDD (for supply measurement) + 4: Temperature sensor + If this field is left empty, normal input is selected. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 3, 4] + default: 0 + + required: + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,ads131e08"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpha; + clocks = <&clk2048k>; + clock-names = "adc-clk"; + interrupt-parent = <&gpio5>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + vref-supply = <&adc_vref>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + + channel@1 { + reg = <1>; + }; + + channel@2 { + reg = <2>; + ti,gain = <2>; + }; + + channel@3 { + reg = <3>; + }; + + channel@4 { + reg = <4>; + }; + + channel@5 { + reg = <5>; + }; + + channel@6 { + reg = <6>; + }; + + channel@7 { + reg = <7>; + ti,mux = <4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml new file mode 100644 index 000000000000..2155d3f5666c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/cdc/adi,ad7150.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog device AD7150 and similar capacitance to digital convertors. + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +properties: + compatible: + enum: + - adi,ad7150 + - adi,ad7151 + - adi,ad7156 + + reg: + maxItems: 1 + + vdd-supply: true + + interrupts: true + +allOf: + - if: + properties: + compatible: + contains: + enum: + - adi,ad7150 + - adi,ad7156 + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + - if: + properties: + compatible: + contains: + const: adi,ad7151 + then: + properties: + interrupts: + minItems: 1 + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cdc@48 { + compatible = "adi,ad7150"; + reg = <0x48>; + interrupts = <25 2>, <26 2>; + interrupt-parent = <&gpio>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml index d97ee774d6a6..3f57a1b813e6 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml @@ -83,7 +83,7 @@ examples: #size-cells = <0>; gyroscope@0 { - compatible = "nxp,fxas2102c"; + compatible = "nxp,fxas21002c"; reg = <0x0>; spi-max-frequency = <2000000>; diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml index 79fba1508e89..a7574210175a 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml @@ -71,15 +71,6 @@ properties: minimum: 0 maximum: 3 - adi,scaled-output-hz: - description: - This property must be present if the clock mode is scaled-sync through - clock-names property. In this mode, the input clock can have a range - of 1Hz to 128HZ which must be scaled to originate an allowable sample - rate. This property specifies that rate. - minimum: 1900 - maximum: 2100 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml b/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml index 27972938b60d..c63b79c3351b 100644 --- a/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml +++ b/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml @@ -48,7 +48,6 @@ properties: vdd-supply: true capella,aset-resistance-ohms: - $ref: /schemas/types.yaml#/definitions/uint32 enum: [50000, 100000, 300000, 600000] description: > Sensitivity calibration resistance. Note that calibration curves diff --git a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml index de5882cb3360..dd78abe0ec8d 100644 --- a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml +++ b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml @@ -11,12 +11,12 @@ maintainers: properties: compatible: - const: upisemi,asd5182 + const: upisemi,usd5182 reg: maxItems: 1 - upsemi,glass-coef: + upisemi,glass-coef: $ref: /schemas/types.yaml#/definitions/uint32 description: | glass attenuation factor - compensation factor of resolution 1000 diff --git a/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml new file mode 100644 index 000000000000..099b4be927d4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC MKBP Proximity Sensor + +maintainers: + - Stephen Boyd <swboyd@chromium.org> + - Benson Leung <bleung@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +description: | + Google's ChromeOS EC sometimes has the ability to detect user proximity. + This is implemented on the EC as near/far logic and exposed to the OS + via an MKBP switch bit. + +properties: + compatible: + const: google,cros-ec-mkbp-proximity + + label: + description: Name for proximity sensor + +required: + - compatible + +additionalProperties: false + +examples: + - | + proximity { + compatible = "google,cros-ec-mkbp-proximity"; + label = "proximity-wifi-lte"; + }; diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index db291a9390b7..7e98f47987dc 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -66,6 +66,7 @@ properties: - st,lis3mdl-magn - st,lis2mdl - st,lsm9ds1-magn + - st,iis2mdc # Pressure sensors - st,lps001wp-press - st,lps25h-press diff --git a/Documentation/devicetree/bindings/index.rst b/Documentation/devicetree/bindings/index.rst index 3837b17c234f..d9002a3a0abb 100644 --- a/Documentation/devicetree/bindings/index.rst +++ b/Documentation/devicetree/bindings/index.rst @@ -1,12 +1,9 @@ .. SPDX-License-Identifier: GPL-2.0 -=========== -Device Tree -=========== - .. toctree:: :maxdepth: 1 ABI - submitting-patches writing-bindings + writing-schema + submitting-patches diff --git a/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt b/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt index 84f1a1b505d2..be31cf05cd2e 100644 --- a/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt +++ b/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt @@ -1,7 +1,7 @@ Hisilicon RoCE DT description Hisilicon RoCE engine is a part of network subsystem. -It works depending on other part of network wubsytem, such as, gmac and +It works depending on other part of network subsystem, such as gmac and dsa fabric. Additional properties are described here: diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml index 054406bbd22b..721878d5b7af 100644 --- a/Documentation/devicetree/bindings/input/adc-joystick.yaml +++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml @@ -24,7 +24,9 @@ properties: description: > List of phandle and IIO specifier pairs. Each pair defines one ADC channel to which a joystick axis is connected. - See Documentation/devicetree/bindings/iio/iio-bindings.txt for details. + See + https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml + for details. '#address-cells': const: 1 diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml index 8c6418f76e94..3ec579d63570 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml @@ -39,6 +39,13 @@ properties: (active low). The line must be flagged with GPIO_ACTIVE_LOW. + wake-gpios: + maxItems: 1 + description: + Optional GPIO specifier for the touchscreen's wake pin + (active low). The line must be flagged with + GPIO_ACTIVE_LOW. + linux,gpio-keymap: $ref: /schemas/types.yaml#/definitions/uint32-array description: | @@ -53,6 +60,29 @@ properties: or experiment to determine which bit corresponds to which input. Use KEY_RESERVED for unused padding values. + atmel,wakeup-method: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The WAKE line is an active-low input that is used to wake up the touch + controller from deep-sleep mode before communication with the controller + could be started. This optional feature used to minimize current + consumption when the controller is in deep sleep mode. This feature is + relevant only to some controller families, like mXT1386 controller for + example. + + The WAKE pin can be connected in one of the following ways: + 1) left permanently low + 2) connected to the I2C-compatible SCL pin + 3) connected to a GPIO pin on the host + enum: + - 0 # ATMEL_MXT_WAKEUP_NONE + - 1 # ATMEL_MXT_WAKEUP_I2C_SCL + - 2 # ATMEL_MXT_WAKEUP_GPIO + default: 0 + + wakeup-source: + type: boolean + required: - compatible - reg @@ -63,6 +93,7 @@ additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/atmel-maxtouch.h> #include <dt-bindings/gpio/gpio.h> i2c { #address-cells = <1>; @@ -75,6 +106,7 @@ examples: reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; vdda-supply = <&ab8500_ldo_aux2_reg>; vdd-supply = <&ab8500_ldo_aux5_reg>; + atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>; }; }; diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index ab407f266bef..74244d21d2b3 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -32,6 +32,12 @@ properties: Duration in seconds which the key should be kept pressed for device to power off automatically. Device with key pressed shutdown feature can specify this property. + + reset-time-sec: + description: + Duration in seconds which the key should be kept pressed for device to + reset automatically. Device with key pressed reset feature can specify + this property. $ref: /schemas/types.yaml#/definitions/uint32 additionalProperties: true diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml new file mode 100644 index 000000000000..0cb736c541c9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/iqs626a.yaml @@ -0,0 +1,843 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/iqs626a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS626A Capacitive Touch Controller + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +description: | + The Azoteq IQS626A is a 14-channel capacitive touch controller that features + additional Hall-effect and inductive sensing capabilities. + + Link to datasheet: https://www.azoteq.com/ + +allOf: + - $ref: touchscreen/touchscreen.yaml# + +properties: + compatible: + const: azoteq,iqs626a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + azoteq,suspend-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the power mode during suspend as follows: + 0: Automatic (same as normal runtime, i.e. suspend/resume disabled) + 1: Low power (all sensing at a reduced reporting rate) + 2: Ultra-low power (ULP channel proximity sensing) + 3: Halt (no sensing) + + azoteq,clk-div: + type: boolean + description: Divides the device's core clock by a factor of 4. + + azoteq,ulp-enable: + type: boolean + description: + Permits the device to automatically enter ultra-low-power mode from low- + power mode. + + azoteq,ulp-update: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 3 + description: | + Specifies the rate at which the trackpad, generic and Hall channels are + updated during ultra-low-power mode as follows: + 0: 8 + 1: 13 + 2: 28 + 3: 54 + 4: 89 + 5: 135 + 6: 190 + 7: 256 + + azoteq,ati-band-disable: + type: boolean + description: Disables the ATI band check. + + azoteq,ati-lp-only: + type: boolean + description: Limits automatic ATI to low-power mode. + + azoteq,gpio3-select: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 1 + description: | + Selects the channel or group of channels for which the GPIO3 pin + represents touch state as follows: + 0: None + 1: ULP channel + 2: Trackpad + 3: Trackpad + 4: Generic channel 0 + 5: Generic channel 1 + 6: Generic channel 2 + 7: Hall channel + + azoteq,reseed-select: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the event(s) that prompt the device to reseed (i.e. reset the + long-term average) of an associated channel as follows: + 0: None + 1: Proximity + 2: Proximity or touch + 3: Proximity, touch or deep touch + + azoteq,thresh-extend: + type: boolean + description: Multiplies all touch and deep-touch thresholds by 4. + + azoteq,tracking-enable: + type: boolean + description: + Enables all associated channels to track their respective reference + channels. + + azoteq,reseed-offset: + type: boolean + description: + Applies an 8-count offset to all long-term averages upon either ATI or + reseed events. + + azoteq,rate-np-ms: + minimum: 0 + maximum: 255 + default: 150 + description: Specifies the report rate (in ms) during normal-power mode. + + azoteq,rate-lp-ms: + minimum: 0 + maximum: 255 + default: 150 + description: Specifies the report rate (in ms) during low-power mode. + + azoteq,rate-ulp-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 0 + description: Specifies the report rate (in ms) during ultra-low-power mode. + + azoteq,timeout-pwr-ms: + multipleOf: 512 + minimum: 0 + maximum: 130560 + default: 2560 + description: + Specifies the length of time (in ms) to wait for an event before moving + from normal-power mode to low-power mode, or (if 'azoteq,ulp-enable' is + present) from low-power mode to ultra-low-power mode. + + azoteq,timeout-lta-ms: + multipleOf: 512 + minimum: 0 + maximum: 130560 + default: 40960 + description: + Specifies the length of time (in ms) to wait before resetting the long- + term average of all channels. Specify the maximum timeout to disable it + altogether. + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +patternProperties: + "^ulp-0|generic-[0-2]|hall$": + type: object + description: + Represents a single sensing channel. A channel is active if defined and + inactive otherwise. + + properties: + azoteq,ati-exclude: + type: boolean + description: + Prevents the channel from participating in an ATI event that is + manually triggered during initialization. + + azoteq,reseed-disable: + type: boolean + description: + Prevents the channel from being reseeded if the long-term average + timeout (defined in 'azoteq,timeout-lta') expires. + + azoteq,meas-cap-decrease: + type: boolean + description: + Decreases the internal measurement capacitance from 60 pF to 15 pF. + + azoteq,rx-inactive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 0 + description: | + Specifies how inactive CRX pins are to be terminated as follows: + 0: VSS + 1: Floating + 2: VREG (generic channels only) + + azoteq,linearize: + type: boolean + description: + Enables linearization of the channel's counts (generic and Hall + channels) or inverts the polarity of the channel's proximity or + touch states (ULP channel). + + azoteq,dual-direction: + type: boolean + description: + Specifies that the channel's long-term average is to freeze in the + presence of either increasing or decreasing counts, thereby permit- + ting events to be reported in either direction. + + azoteq,filt-disable: + type: boolean + description: Disables raw count filtering for the channel. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the channel's ATI mode as follows: + 0: Disabled + 1: Semi-partial + 2: Partial + 3: Full + + The default value is a function of the channel and the device's reset + user interface (RUI); reference the datasheet for further information + about the available RUI options. + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [75, 100, 150, 200] + description: + Specifies the channel's ATI base. The default value is a function + of the channel and the device's RUI. + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 32 + minimum: 0 + maximum: 2016 + description: + Specifies the channel's ATI target. The default value is a function + of the channel and the device's RUI. + + azoteq,cct-increase: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 16 + default: 0 + description: + Specifies the degree to which the channel's charge cycle time is to + be increased, with 0 representing no increase. The maximum value is + limited to 4 in the case of the ULP channel, and the property is un- + available entirely in the case of the Hall channel. + + azoteq,proj-bias: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the bias current applied during projected-capacitance + sensing as follows: + 0: 2.5 uA + 1: 5 uA + 2: 10 uA + 3: 20 uA + + This property is unavailable in the case of the Hall channel. + + azoteq,sense-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the channel's sensing frequency as follows (parenthesized + numbers represent the frequency if 'azoteq,clk-div' is present): + 0: 4 MHz (1 MHz) + 1: 2 MHz (500 kHz) + 2: 1 MHz (250 kHz) + 3: 500 kHz (125 kHz) + + This property is unavailable in the case of the Hall channel. The + default value is a function of the channel and the device's RUI. + + azoteq,ati-band-tighten: + type: boolean + description: + Tightens the ATI band from 1/8 to 1/16 of the desired target (ULP and + generic channels only). + + azoteq,proj-enable: + type: boolean + description: Enables projected-capacitance sensing (ULP channel only). + + azoteq,filt-str-np-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during normal-power mode (ULP + and generic channels only). + + azoteq,filt-str-lp-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during low-power mode (ULP and + generic channels only). + + azoteq,filt-str-np-lta: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the long-term average filter strength during normal-power + mode (ULP and generic channels only). + + azoteq,filt-str-lp-lta: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the long-term average filter strength during low-power mode + (ULP and generic channels only). + + azoteq,rx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + description: + Specifies the CRX pin(s) associated with the channel. + + This property is unavailable in the case of the Hall channel. The + default value is a function of the channel and the device's RUI. + + azoteq,tx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + description: + Specifies the TX pin(s) associated with the channel. + + This property is unavailable in the case of the Hall channel. The + default value is a function of the channel and the device's RUI. + + azoteq,local-cap-size: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4] + default: 0 + description: | + Specifies the capacitance to be added to the channel as follows: + 0: 0 pF + 1: 0.5 pF + 2: 1.0 pF + 3: 1.5 pF + 4: 2.0 pF + + This property is unavailable in the case of the ULP or Hall channels. + + azoteq,sense-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 8, 9, 12, 14, 15] + description: | + Specifies the channel's sensing mode as follows: + 0: Self capacitance + 1: Projected capacitance + 8: Self inductance + 9: Mutual inductance + 12: External + 14: Hall effect + 15: Temperature + + This property is unavailable in the case of the ULP or Hall channels. + The default value is a function of the channel and the device's RUI. + + azoteq,tx-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the inductive sensing excitation frequency as follows + (parenthesized numbers represent the frequency if 'azoteq,clk-div' + is present): + 0: 16 MHz (4 MHz) + 1: 8 MHz (2 MHz) + 2: 4 MHz (1 MHz) + 3: 2 MHz (500 kHz) + + This property is unavailable in the case of the ULP or Hall channels. + + azoteq,invert-enable: + type: boolean + description: + Inverts the polarity of the states reported for proximity, touch and + deep-touch events relative to their respective thresholds (generic + channels only). + + azoteq,comp-disable: + type: boolean + description: + Disables compensation for the channel (generic channels only). + + azoteq,static-enable: + type: boolean + description: + Enables the static front-end for the channel (generic channels only). + + azoteq,assoc-select: + $ref: /schemas/types.yaml#/definitions/string-array + minItems: 1 + maxItems: 6 + items: + enum: + - ulp-0 + - trackpad-3x2 + - trackpad-3x3 + - generic-0 + - generic-1 + - generic-2 + - hall + description: + Specifies the associated channels for which the channel serves as a + reference channel. By default, no channels are selected. This prop- + erty is only available for the generic channels. + + azoteq,assoc-weight: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 0 + description: + Specifies the channel's impact weight if it acts as an associated + channel (0 = 0% impact, 255 = 200% impact). This property is only + available for the generic channels. + + patternProperties: + "^event-(prox|touch|deep)(-alt)?$": + type: object + description: + Represents a proximity, touch or deep-touch event reported by the + channel in response to a decrease in counts. Node names suffixed with + '-alt' instead correspond to an increase in counts. + + By default, the long-term average tracks an increase in counts such + that only events corresponding to a decrease in counts are reported + (refer to the datasheet for more information). + + Specify 'azoteq,dual-direction' to freeze the long-term average when + the counts increase or decrease such that events of either direction + can be reported. Alternatively, specify 'azoteq,invert-enable' to in- + vert the polarity of the states reported by the channel. + + Complementary events (e.g. event-touch and event-touch-alt) can both + be present and specify different key or switch codes, but not differ- + ent thresholds or hysteresis (if applicable). + + Proximity events are unavailable in the case of the Hall channel, and + deep-touch events are only available for the generic channels. Unless + otherwise specified, default values are a function of the channel and + the device's RUI. + + properties: + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the threshold for the event. + + azoteq,hyst: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the hysteresis for the event (touch and deep-touch + events only). + + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Numeric key or switch code associated with the event. + + linux,input-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 5] + description: + Specifies whether the event is to be interpreted as a key (1) or + a switch (5). By default, Hall-channel events are interpreted as + switches and all others are interpreted as keys. + + dependencies: + linux,input-type: ["linux,code"] + + additionalProperties: false + + dependencies: + azoteq,assoc-weight: ["azoteq,assoc-select"] + + additionalProperties: false + + "^trackpad-3x[2-3]$": + type: object + description: + Represents all channels associated with the trackpad. The channels are + collectively active if the trackpad is defined and inactive otherwise. + + properties: + azoteq,ati-exclude: + type: boolean + description: + Prevents the trackpad channels from participating in an ATI event + that is manually triggered during initialization. + + azoteq,reseed-disable: + type: boolean + description: + Prevents the trackpad channels from being reseeded if the long-term + average timeout (defined in 'azoteq,timeout-lta') expires. + + azoteq,meas-cap-decrease: + type: boolean + description: + Decreases the internal measurement capacitance from 60 pF to 15 pF. + + azoteq,rx-inactive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + description: | + Specifies how inactive CRX pins are to be terminated as follows: + 0: VSS + 1: Floating + + azoteq,linearize: + type: boolean + description: Inverts the polarity of the trackpad's touch state. + + azoteq,dual-direction: + type: boolean + description: + Specifies that the trackpad's long-term averages are to freeze in + the presence of either increasing or decreasing counts, thereby + permitting events to be reported in either direction. + + azoteq,filt-disable: + type: boolean + description: Disables raw count filtering for the trackpad channels. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the trackpad's ATI mode as follows: + 0: Disabled + 1: Semi-partial + 2: Partial + 3: Full + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 6 + maxItems: 9 + items: + minimum: 45 + maximum: 300 + default: [45, 45, 45, 45, 45, 45, 45, 45, 45] + description: Specifies each individual trackpad channel's ATI base. + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 32 + minimum: 0 + maximum: 2016 + default: 0 + description: Specifies the trackpad's ATI target. + + azoteq,cct-increase: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 + default: 0 + description: + Specifies the degree to which the trackpad's charge cycle time is to + be increased, with 0 representing no increase. + + azoteq,proj-bias: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the bias current applied during projected-capacitance + sensing as follows: + 0: 2.5 uA + 1: 5 uA + 2: 10 uA + 3: 20 uA + + azoteq,sense-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the trackpad's sensing frequency as follows (parenthesized + numbers represent the frequency if 'azoteq,clk-div' is present): + 0: 4 MHz (1 MHz) + 1: 2 MHz (500 kHz) + 2: 1 MHz (250 kHz) + 3: 500 kHz (125 kHz) + + azoteq,ati-band-tighten: + type: boolean + description: + Tightens the ATI band from 1/8 to 1/16 of the desired target. + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 6 + maxItems: 9 + items: + minimum: 0 + maximum: 255 + default: [0, 0, 0, 0, 0, 0, 0, 0, 0] + description: + Specifies each individual trackpad channel's touch threshold. + + azoteq,hyst: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + description: Specifies the trackpad's touch hysteresis. + + azoteq,lta-update: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 0 + description: | + Specifies the update rate of the trackpad's long-term average during + ultra-low-power mode as follows: + 0: 2 + 1: 4 + 2: 8 + 3: 16 + 4: 32 + 5: 64 + 6: 128 + 7: 255 + + azoteq,filt-str-trackpad: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: Specifies the trackpad coordinate filter strength. + + azoteq,filt-str-np-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during normal-power mode. + + azoteq,filt-str-lp-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during low-power mode. + + linux,keycodes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 6 + description: | + Specifies the numeric keycodes associated with each available gesture + in the following order (enter 0 for unused gestures): + 0: Positive flick or swipe in X direction + 1: Negative flick or swipe in X direction + 2: Positive flick or swipe in Y direction + 3: Negative flick or swipe in Y direction + 4: Tap + 5: Hold + + azoteq,gesture-swipe: + type: boolean + description: + Directs the device to interpret axial gestures as a swipe (finger + remains on trackpad) instead of a flick (finger leaves trackpad). + + azoteq,timeout-tap-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 0 + description: + Specifies the length of time (in ms) within which a trackpad touch + must be released in order to be interpreted as a tap. + + azoteq,timeout-swipe-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 0 + description: + Specifies the length of time (in ms) within which an axial gesture + must be completed in order to be interpreted as a flick or swipe. + + azoteq,thresh-swipe: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 0 + description: + Specifies the number of points across which an axial gesture must + travel in order to be interpreted as a flick or swipe. + + dependencies: + azoteq,gesture-swipe: ["linux,keycodes"] + azoteq,timeout-tap-ms: ["linux,keycodes"] + azoteq,timeout-swipe-ms: ["linux,keycodes"] + azoteq,thresh-swipe: ["linux,keycodes"] + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + iqs626a@44 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "azoteq,iqs626a"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + azoteq,rate-np-ms = <16>; + azoteq,rate-lp-ms = <160>; + + azoteq,timeout-pwr-ms = <2560>; + azoteq,timeout-lta-ms = <32768>; + + ulp-0 { + azoteq,meas-cap-decrease; + + azoteq,ati-base = <75>; + azoteq,ati-target = <1024>; + + azoteq,rx-enable = <2>, <3>, <4>, + <5>, <6>, <7>; + + event-prox { + linux,code = <KEY_POWER>; + }; + }; + + trackpad-3x3 { + azoteq,filt-str-np-cnt = <1>; + azoteq,filt-str-lp-cnt = <1>; + + azoteq,hyst = <4>; + azoteq,thresh = <35>, <40>, <40>, + <38>, <33>, <38>, + <35>, <35>, <35>; + + azoteq,ati-mode = <3>; + azoteq,ati-base = <195>, <195>, <195>, + <195>, <195>, <195>, + <195>, <195>, <195>; + azoteq,ati-target = <512>; + + azoteq,proj-bias = <1>; + azoteq,sense-freq = <2>; + + linux,keycodes = <KEY_VOLUMEUP>, + <KEY_VOLUMEDOWN>, + <KEY_NEXTSONG>, + <KEY_PREVIOUSSONG>, + <KEY_PLAYPAUSE>, + <KEY_STOPCD>; + + azoteq,gesture-swipe; + azoteq,timeout-swipe-ms = <800>; + azoteq,timeout-tap-ms = <400>; + azoteq,thresh-swipe = <40>; + }; + + /* + * Preserve the default register settings for + * the temperature-tracking channel leveraged + * by reset user interface (RUI) 1. + * + * Scalar properties (e.g. ATI mode) are left + * untouched by simply omitting them; boolean + * properties must be specified explicitly as + * needed. + */ + generic-2 { + azoteq,reseed-disable; + azoteq,meas-cap-decrease; + azoteq,dual-direction; + azoteq,comp-disable; + azoteq,static-enable; + }; + + hall { + azoteq,reseed-disable; + azoteq,meas-cap-decrease; + + event-touch { + linux,code = <SW_LID>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml new file mode 100644 index 000000000000..b5f377215c09 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs5xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS550/572/525 Trackpad/Touchscreen Controller + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +description: | + The Azoteq IQS550, IQS572 and IQS525 trackpad and touchscreen controllers + employ projected-capacitance sensing and can track up to five independent + contacts. + + Link to datasheet: https://www.azoteq.com/ + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - azoteq,iqs550 + - azoteq,iqs572 + - azoteq,iqs525 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + wakeup-source: true + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@74 { + compatible = "azoteq,iqs550"; + reg = <0x74>; + interrupt-parent = <&gpio>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpio 22 (GPIO_ACTIVE_LOW | + GPIO_PUSH_PULL)>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml new file mode 100644 index 000000000000..942562f1e45b --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hycon HY46XX series touchscreen controller bindings + +description: | + There are 6 variants of the chip for various touch panel sizes and cover lens material + Glass: 0.3mm--4.0mm + PET/PMMA: 0.2mm--2.0mm + HY4613(B)-N048 < 6" + HY4614(B)-N068 7" .. 10.1" + HY4621-NS32 < 5" + HY4623-NS48 5.1" .. 7" + Glass: 0.3mm--8.0mm + PET/PMMA: 0.2mm--4.0mm + HY4633(B)-N048 < 6" + HY4635(B)-N048 < 7" .. 10.1" + +maintainers: + - Giulio Benetti <giulio.benetti@benettiengineering.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - hycon,hy4613 + - hycon,hy4614 + - hycon,hy4621 + - hycon,hy4623 + - hycon,hy4633 + - hycon,hy4635 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vcc-supply: true + + hycon,threshold: + description: Allows setting the sensitivity in the range from 0 to 255. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + hycon,glove-enable: + type: boolean + description: Allows enabling glove setting. + + hycon,report-speed-hz: + description: Allows setting the report speed in Hertz. + minimum: 1 + maximum: 255 + + hycon,noise-filter-enable: + type: boolean + description: Allows enabling power noise filter. + + hycon,filter-data: + description: Allows setting how many samples throw before reporting touch + in the range from 0 to 5. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + + hycon,gain: + description: Allows setting the sensitivity distance in the range from 0 to 5. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + + hycon,edge-offset: + description: Allows setting the edge compensation in the range from 0 to 16. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 16 + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + interrupt-controller: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@1c { + compatible = "hycon,hy4633"; + reg = <0x1c>; + interrupt-parent = <&gpio2>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml new file mode 100644 index 000000000000..a190e7baac31 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek I2C Touchscreen Controller + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - ilitek,ili2130 + - ilitek,ili2131 + - ilitek,ili2132 + - ilitek,ili2316 + - ilitek,ili2322 + - ilitek,ili2323 + - ilitek,ili2326 + - ilitek,ili2520 + - ilitek,ili2521 + + reg: + const: 0x41 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + wakeup-source: + type: boolean + description: touchscreen can be used as a wakeup source. + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - reset-gpios + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@41 { + compatible = "ilitek,ili2520"; + reg = <0x41>; + + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + touchscreen-inverted-y; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt b/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt deleted file mode 100644 index efa0820e2469..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt +++ /dev/null @@ -1,80 +0,0 @@ -Azoteq IQS550/572/525 Trackpad/Touchscreen Controller - -Required properties: - -- compatible : Must be equal to one of the following: - "azoteq,iqs550" - "azoteq,iqs572" - "azoteq,iqs525" - -- reg : I2C slave address for the device. - -- interrupts : GPIO to which the device's active-high RDY - output is connected (see [0]). - -- reset-gpios : GPIO to which the device's active-low NRST - input is connected (see [1]). - -Optional properties: - -- touchscreen-min-x : See [2]. - -- touchscreen-min-y : See [2]. - -- touchscreen-size-x : See [2]. If this property is omitted, the - maximum x-coordinate is specified by the - device's "X Resolution" register. - -- touchscreen-size-y : See [2]. If this property is omitted, the - maximum y-coordinate is specified by the - device's "Y Resolution" register. - -- touchscreen-max-pressure : See [2]. Pressure is expressed as the sum of - the deltas across all channels impacted by a - touch event. A channel's delta is calculated - as its count value minus a reference, where - the count value is inversely proportional to - the channel's capacitance. - -- touchscreen-fuzz-x : See [2]. - -- touchscreen-fuzz-y : See [2]. - -- touchscreen-fuzz-pressure : See [2]. - -- touchscreen-inverted-x : See [2]. Inversion is applied relative to that - which may already be specified by the device's - FLIP_X and FLIP_Y register fields. - -- touchscreen-inverted-y : See [2]. Inversion is applied relative to that - which may already be specified by the device's - FLIP_X and FLIP_Y register fields. - -- touchscreen-swapped-x-y : See [2]. Swapping is applied relative to that - which may already be specified by the device's - SWITCH_XY_AXIS register field. - -[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -[1]: Documentation/devicetree/bindings/gpio/gpio.txt -[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt - -Example: - - &i2c1 { - /* ... */ - - touchscreen@74 { - compatible = "azoteq,iqs550"; - reg = <0x74>; - interrupt-parent = <&gpio>; - interrupts = <17 4>; - reset-gpios = <&gpio 27 1>; - - touchscreen-size-x = <640>; - touchscreen-size-y = <480>; - - touchscreen-max-pressure = <16000>; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml new file mode 100644 index 000000000000..62366886fb3e --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/melfas,mms114.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Melfas MMS114 family touchscreen controller bindings + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + $nodename: + pattern: "^touchscreen(@.*)?$" + + compatible: + items: + - enum: + - melfas,mms114 + - melfas,mms134s + - melfas,mms136 + - melfas,mms152 + - melfas,mms345l + + reg: + description: I2C address + + clock-frequency: + description: I2C client clock frequency, defined for host + minimum: 100000 + maximum: 400000 + + interrupts: + maxItems: 1 + + avdd-supply: + description: Analog power supply regulator on AVDD pin + + vdd-supply: + description: Digital power supply regulator on VDD pin + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-fuzz-pressure: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + touchscreen-max-pressure: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpio>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&ldo1_reg>; + vdd-supply = <&ldo2_reg>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + touchscreen-fuzz-x = <10>; + touchscreen-fuzz-y = <10>; + touchscreen-fuzz-pressure = <10>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt deleted file mode 100644 index 707234cfd7e6..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt +++ /dev/null @@ -1,42 +0,0 @@ -* MELFAS MMS114/MMS152/MMS345L touchscreen controller - -Required properties: -- compatible: should be one of: - - "melfas,mms114" - - "melfas,mms152" - - "melfas,mms345l" -- reg: I2C address of the chip -- interrupts: interrupt to which the chip is connected -- touchscreen-size-x: See [1] -- touchscreen-size-y: See [1] - -Optional properties: -- touchscreen-fuzz-x: See [1] -- touchscreen-fuzz-y: See [1] -- touchscreen-fuzz-pressure: See [1] -- touchscreen-inverted-x: See [1] -- touchscreen-inverted-y: See [1] -- touchscreen-swapped-x-y: See [1] - -[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt - -Example: - - i2c@00000000 { - /* ... */ - - touchscreen@48 { - compatible = "melfas,mms114"; - reg = <0x48>; - interrupts = <39 0>; - touchscreen-size-x = <720>; - touchscreen-size-y = <1280>; - touchscreen-fuzz-x = <10>; - touchscreen-fuzz-y = <10>; - touchscreen-fuzz-pressure = <10>; - touchscreen-inverted-x; - touchscreen-inverted-y; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml new file mode 100644 index 000000000000..3a42c23faf6f --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg2638.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MStar msg2638 touchscreen controller Bindings + +maintainers: + - Vincent Knecht <vincent.knecht@mailoo.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: mstar,msg2638 + + reg: + const: 0x26 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vdd-supply: + description: Power supply regulator for the chip + + vddio-supply: + description: Power supply regulator for the I2C bus + + touchscreen-size-x: true + touchscreen-size-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - reset-gpios + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@26 { + compatible = "mstar,msg2638"; + reg = <0x26>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_reset_default>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + touchscreen-size-x = <2048>; + touchscreen-size-y = <2048>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt index 51456c0e9a27..af5223bb5bdd 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt @@ -5,7 +5,10 @@ Required properties: - compatible: must be "resistive-adc-touch" The device must be connected to an ADC device that provides channels for position measurement and optional pressure. -Refer to ../iio/iio-bindings.txt for details +Refer to +https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml +for details + - iio-channels: must have at least two channels connected to an ADC device. These should correspond to the channels exposed by the ADC device and should have the right index as the ADC device registers them. These channels diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index 799e73cdb90b..cb6498108b78 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -71,6 +71,16 @@ properties: - qcom,sm8250-mmss-noc - qcom,sm8250-npu-noc - qcom,sm8250-system-noc + - qcom,sm8350-aggre1-noc + - qcom,sm8350-aggre2-noc + - qcom,sm8350-config-noc + - qcom,sm8350-dc-noc + - qcom,sm8350-gem-noc + - qcom,sm8350-lpass-ag-noc + - qcom,sm8350-mc-virt + - qcom,sm8350-mmss-noc + - qcom,sm8350-compute-noc + - qcom,sm8350-system-noc '#interconnect-cells': enum: [ 1, 2 ] diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml new file mode 100644 index 000000000000..29de7807df54 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sdm660.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM660 Network-On-Chip interconnect + +maintainers: + - AngeloGioacchino Del Regno <kholk11@gmail.com> + +description: | + The Qualcomm SDM660 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. + +properties: + reg: + maxItems: 1 + + compatible: + enum: + - qcom,sdm660-a2noc + - qcom,sdm660-bimc + - qcom,sdm660-cnoc + - qcom,sdm660-gnoc + - qcom,sdm660-mnoc + - qcom,sdm660-snoc + + '#interconnect-cells': + const: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + +required: + - compatible + - reg + - '#interconnect-cells' + - clock-names + - clocks + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm660-mnoc + then: + properties: + clocks: + items: + - description: Bus Clock. + - description: Bus A Clock. + - description: CPU-NoC High-performance Bus Clock. + clock-names: + items: + - const: bus + - const: bus_a + - const: iface + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm660-a2noc + - qcom,sdm660-bimc + - qcom,sdm660-cnoc + - qcom,sdm660-gnoc + - qcom,sdm660-snoc + then: + properties: + clocks: + items: + - description: Bus Clock. + - description: Bus A Clock. + clock-names: + items: + - const: bus + - const: bus_a + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/clock/qcom,mmcc-sdm660.h> + + bimc: interconnect@1008000 { + compatible = "qcom,sdm660-bimc"; + reg = <0x01008000 0x78000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + cnoc: interconnect@1500000 { + compatible = "qcom,sdm660-cnoc"; + reg = <0x01500000 0x10000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + snoc: interconnect@1626000 { + compatible = "qcom,sdm660-snoc"; + reg = <0x01626000 0x7090>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + a2noc: interconnect@1704000 { + compatible = "qcom,sdm660-a2noc"; + reg = <0x01704000 0xc100>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + }; + + mnoc: interconnect@1745000 { + compatible = "qcom,sdm660-mnoc"; + reg = <0x01745000 0xa010>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a", "iface"; + clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>, + <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>, + <&mmcc AHB_CLK_SRC>; + }; + + gnoc: interconnect@17900000 { + compatible = "qcom,sdm660-gnoc"; + reg = <0x17900000 0xe000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&xo_board>, <&xo_board>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml new file mode 100644 index 000000000000..cf6c091a07b1 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/apple,aic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple Interrupt Controller + +maintainers: + - Hector Martin <marcan@marcan.st> + +description: | + The Apple Interrupt Controller is a simple interrupt controller present on + Apple ARM SoC platforms, including various iPhone and iPad devices and the + "Apple Silicon" Macs. + + It provides the following features: + + - Level-triggered hardware IRQs wired to SoC blocks + - Single mask bit per IRQ + - Per-IRQ affinity setting + - Automatic masking on event delivery (auto-ack) + - Software triggering (ORed with hw line) + - 2 per-CPU IPIs (meant as "self" and "other", but they are interchangeable + if not symmetric) + - Automatic prioritization (single event/ack register per CPU, lower IRQs = + higher priority) + - Automatic masking on ack + - Default "this CPU" register view and explicit per-CPU views + + This device also represents the FIQ interrupt sources on platforms using AIC, + which do not go through a discrete interrupt controller. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - const: apple,t8103-aic + - const: apple,aic + + interrupt-controller: true + + '#interrupt-cells': + const: 3 + description: | + The 1st cell contains the interrupt type: + - 0: Hardware IRQ + - 1: FIQ + + The 2nd cell contains the interrupt number. + - HW IRQs: interrupt number + - FIQs: + - 0: physical HV timer + - 1: virtual HV timer + - 2: physical guest timer + - 3: virtual guest timer + + The 3rd cell contains the interrupt flags. This is normally + IRQ_TYPE_LEVEL_HIGH (4). + + reg: + description: | + Specifies base physical address and size of the AIC registers. + maxItems: 1 + +required: + - compatible + - '#interrupt-cells' + - interrupt-controller + - reg + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + aic: interrupt-controller@23b100000 { + compatible = "apple,t8103-aic", "apple,aic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2 0x3b100000 0x0 0x8000>; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml new file mode 100644 index 000000000000..160ff4b07cac --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/idt,32434-pic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IDT 79RC32434 Interrupt Controller Device Tree Bindings + +maintainers: + - Thomas Bogendoerfer <tsbogend@alpha.franken.de> + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + "#interrupt-cells": + const: 1 + + compatible: + const: idt,32434-pic + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + +required: + - "#interrupt-cells" + - compatible + - reg + - interrupt-controller + - interrupts + +additionalProperties: false + +examples: + - | + idtpic3: interrupt-controller@3800c { + compatible = "idt,32434-pic"; + reg = <0x3800c 0x0c>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <3>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml index 0a046be8d1cd..0358a7739c8e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml @@ -23,6 +23,7 @@ properties: - enum: - ingenic,jz4775-intc - ingenic,jz4770-intc + - ingenic,jz4760b-intc - const: ingenic,jz4760-intc - items: - const: ingenic,x1000-intc diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml index d1d52d1db2be..d6bc1a687fc7 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml @@ -47,7 +47,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> htintc: interrupt-controller@1fb000080 { - compatible = "loongson,htintc-1.0"; + compatible = "loongson,htpic-1.0"; reg = <0xfb000080 0x40>; interrupt-controller; #interrupt-cells = <1>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index f38e0113f360..067165c4b836 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -10,9 +10,9 @@ maintainers: - Jiaxun Yang <jiaxun.yang@flygoat.com> description: | - This interrupt controller is found in the Loongson-3 family of chips as the primary - package interrupt controller which can route local I/O interrupt to interrupt lines - of cores. + This interrupt controller is found in the Loongson-3 family of chips and + Loongson-2K1000 chip, as the primary package interrupt controller which + can route local I/O interrupt to interrupt lines of cores. allOf: - $ref: /schemas/interrupt-controller.yaml# @@ -22,9 +22,17 @@ properties: oneOf: - const: loongson,liointc-1.0 - const: loongson,liointc-1.0a + - const: loongson,liointc-2.0 reg: - maxItems: 1 + minItems: 1 + maxItems: 3 + + reg-names: + items: + - const: main + - const: isr0 + - const: isr1 interrupt-controller: true @@ -69,6 +77,26 @@ required: unevaluatedProperties: false +if: + properties: + compatible: + contains: + enum: + - loongson,liointc-2.0 + +then: + properties: + reg: + minItems: 3 + + required: + - reg-names + +else: + properties: + reg: + maxItems: 1 + examples: - | iointc: interrupt-controller@3ff01400 { diff --git a/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml new file mode 100644 index 000000000000..9ce6804bdb99 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/nuvoton,wpcm450-aic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton WPCM450 Advanced Interrupt Controller bindings + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@gmx.net> + +properties: + '#interrupt-cells': + const: 2 + + compatible: + const: nuvoton,wpcm450-aic + + interrupt-controller: true + + reg: + maxItems: 1 + +additionalProperties: false + +required: + - '#interrupt-cells' + - compatible + - reg + - interrupt-controller + +examples: + - | + aic: interrupt-controller@b8002000 { + compatible = "nuvoton,wpcm450-aic"; + reg = <0xb8002000 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt index e9afb48182c7..98d89e53013d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt @@ -19,6 +19,7 @@ Properties: Value type: <string> Definition: Should contain "qcom,<soc>-pdc" and "qcom,pdc" - "qcom,sc7180-pdc": For SC7180 + - "qcom,sc7280-pdc": For SC7280 - "qcom,sdm845-pdc": For SDM845 - "qcom,sdm8250-pdc": For SM8250 - "qcom,sdm8350-pdc": For SM8350 diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index 6ba161dea4d8..9d27aa5111d4 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -34,6 +34,7 @@ properties: items: - enum: - qcom,sc7180-smmu-500 + - qcom,sc7280-smmu-500 - qcom,sc8180x-smmu-500 - qcom,sdm845-smmu-500 - qcom,sm8150-smmu-500 diff --git a/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml b/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml new file mode 100644 index 000000000000..7003e12f55f9 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2020 Unisoc Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/sprd,iommu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc IOMMU and Multi-media MMU + +maintainers: + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + enum: + - sprd,iommu-v1 + + "#iommu-cells": + const: 0 + description: + Unisoc IOMMUs are all single-master IOMMU devices, therefore no + additional information needs to associate with its master device. + Please refer to the generic bindings document for more details, + Documentation/devicetree/bindings/iommu/iommu.txt + + reg: + maxItems: 1 + + clocks: + description: + Reference to a gate clock phandle, since access to some of IOMMUs are + controlled by gate clock, but this is not required. + +required: + - compatible + - reg + - "#iommu-cells" + +additionalProperties: false + +examples: + - | + iommu_disp: iommu@63000800 { + compatible = "sprd,iommu-v1"; + reg = <0x63000800 0x80>; + #iommu-cells = <0>; + }; + + - | + iommu_jpg: iommu@62300300 { + compatible = "sprd,iommu-v1"; + reg = <0x62300300 0x80>; + #iommu-cells = <0>; + clocks = <&mm_gate 1>; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml index 7a6ec1f8c0f3..73fa59e62181 100644 --- a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml @@ -4,13 +4,13 @@ $id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd253.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Kinetic Technologies KTD253 one-wire backlight +title: Kinetic Technologies KTD253 and KTD259 one-wire backlight maintainers: - Linus Walleij <linus.walleij@linaro.org> description: | - The Kinetic Technologies KTD253 is a white LED backlight that is + The Kinetic Technologies KTD253 and KTD259 are white LED backlights controlled by a single GPIO line. If you just turn on the backlight it goes to maximum backlight then you can set the level of backlight using pulses on the enable wire. This is sometimes referred to as @@ -21,7 +21,10 @@ allOf: properties: compatible: - const: kinetic,ktd253 + items: + - enum: + - kinetic,ktd253 + - kinetic,ktd259 enable-gpios: description: GPIO to use to enable/disable and dim the backlight. diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml index 47938e372987..d839e75d9788 100644 --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml @@ -19,6 +19,7 @@ properties: compatible: enum: - qcom,pm8941-wled + - qcom,pmi8994-wled - qcom,pmi8998-wled - qcom,pm660l-wled - qcom,pm8150l-wled diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml index fe7fa25877fd..c7ed2871da06 100644 --- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: CZ.NIC's Turris Omnia LEDs driver maintainers: - - Marek Behún <marek.behun@nic.cz> + - Marek Behún <kabel@kernel.org> description: This module adds support for the RGB LEDs found on the front panel of the diff --git a/Documentation/devicetree/bindings/leds/leds-lgm.yaml b/Documentation/devicetree/bindings/leds/leds-lgm.yaml index 32bbf146c01d..f8d7963c3a13 100644 --- a/Documentation/devicetree/bindings/leds/leds-lgm.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lgm.yaml @@ -14,6 +14,17 @@ properties: compatible: const: intel,lgm-ssoled + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: sso + - const: fpid + gpio-controller: true '#gpio-cells': @@ -36,8 +47,15 @@ properties: additionalProperties: false + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + patternProperties: - "^led@[0-23]$": + "^led@[0-2]$": type: object properties: @@ -81,7 +99,7 @@ examples: #include <dt-bindings/leds/common.h> ssogpio: ssogpio@e0d40000 { - compatible = "intel,sso-led"; + compatible = "intel,lgm-ssoled"; reg = <0xE0D40000 0x2E4>; gpio-controller; #gpio-cells = <2>; @@ -103,8 +121,8 @@ examples: led-gpio = <&ssogpio 0 0>; }; - led@23 { - reg = <23>; + led@2 { + reg = <2>; function = LED_FUNCTION_POWER; color = <LED_COLOR_ID_GREEN>; led-gpio = <&ssogpio 23 0>; diff --git a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml new file mode 100644 index 000000000000..5b0c74aa6723 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-rt4505.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4505 Single Channel LED Driver + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT4505 is a flash LED driver that can support up to 375mA and 1.5A for + torch and flash mode, respectively. + + The data sheet can be found at: + https://www.richtek.com/assets/product_file/RT4505/DS4505-02.pdf + +properties: + compatible: + const: richtek,rt4505 + + reg: + description: I2C slave address of the controller. + maxItems: 1 + + led: + type: object + $ref: common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@63 { + compatible = "richtek,rt4505"; + reg = <0x63>; + + rt4505_flash: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <375000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <800000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml index 15cef82cd356..1a3dff277e2b 100644 --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml @@ -34,12 +34,15 @@ properties: - fsl,imx8mm-mu - fsl,imx8mn-mu - fsl,imx8mp-mu + - fsl,imx8qm-mu - fsl,imx8qxp-mu - const: fsl,imx6sx-mu - description: To communicate with i.MX8 SCU with fast IPC items: - const: fsl,imx8-mu-scu - - const: fsl,imx8qxp-mu + - enum: + - fsl,imx8qm-mu + - fsl,imx8qxp-mu - const: fsl,imx6sx-mu reg: diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml index 168beeb7e9f7..b222f993b232 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml @@ -25,6 +25,8 @@ properties: items: - enum: - qcom,sm8250-ipcc + - qcom,sm8350-ipcc + - qcom,sc7280-ipcc - const: qcom,ipcc reg: diff --git a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml index 26a5cca3f838..80feba82cbd6 100644 --- a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml @@ -15,6 +15,7 @@ properties: compatible: enum: - sprd,sc9860-mailbox + - sprd,sc9863a-mailbox reg: items: @@ -22,9 +23,15 @@ properties: - description: outbox registers' base address interrupts: + minItems: 2 + maxItems: 3 + + interrupt-names: + minItems: 2 items: - - description: inbox interrupt - - description: outbox interrupt + - const: inbox + - const: outbox + - const: supp-outbox clocks: maxItems: 1 @@ -40,6 +47,7 @@ required: - compatible - reg - interrupts + - interrupt-names - "#mbox-cells" - clocks - clock-names @@ -56,5 +64,6 @@ examples: clock-names = "enable"; clocks = <&aon_gate 53>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "inbox", "outbox"; }; ... diff --git a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt deleted file mode 100644 index 6c9c7daf0f5c..000000000000 --- a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt +++ /dev/null @@ -1,50 +0,0 @@ -Texas Instruments' Secure Proxy -======================================== - -The Texas Instruments' secure proxy is a mailbox controller that has -configurable queues selectable at SoC(System on Chip) integration. The -Message manager is broken up into different address regions that are -called "threads" or "proxies" - each instance is unidirectional and is -instantiated at SoC integration level by system controller to indicate -receive or transmit path. - -Message Manager Device Node: -=========================== -Required properties: --------------------- -- compatible: Shall be "ti,am654-secure-proxy" -- reg-names target_data - Map the proxy data region - rt - Map the realtime status region - scfg - Map the configuration region -- reg: Contains the register map per reg-names. -- #mbox-cells Shall be 1 and shall refer to the transfer path - called thread. -- interrupt-names: Contains interrupt names matching the rx transfer path - for a given SoC. Receive interrupts shall be of the - format: "rx_<PID>". -- interrupts: Contains the interrupt information corresponding to - interrupt-names property. - -Example(AM654): ------------- - - secure_proxy: mailbox@32c00000 { - compatible = "ti,am654-secure-proxy"; - #mbox-cells = <1>; - reg-names = "target_data", "rt", "scfg"; - reg = <0x0 0x32c00000 0x0 0x100000>, - <0x0 0x32400000 0x0 0x100000>, - <0x0 0x32800000 0x0 0x100000>; - interrupt-names = "rx_011"; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - }; - - dmsc: dmsc { - [...] - mbox-names = "rx", "tx"; - # RX Thread ID is 11 - # TX Thread ID is 13 - mboxes= <&secure_proxy 11>, - <&secure_proxy 13>; - [...] - }; diff --git a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml new file mode 100644 index 000000000000..eea822861804 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/ti,secure-proxy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments' Secure Proxy + +maintainers: + - Nishanth Menon <nm@ti.com> + +description: | + The Texas Instruments' secure proxy is a mailbox controller that has + configurable queues selectable at SoC(System on Chip) integration. The + Message manager is broken up into different address regions that are + called "threads" or "proxies" - each instance is unidirectional and is + instantiated at SoC integration level by system controller to indicate + receive or transmit path. + +properties: + $nodename: + pattern: "^mailbox@[0-9a-f]+$" + + compatible: + const: ti,am654-secure-proxy + + "#mbox-cells": + const: 1 + description: + Contains the secure proxy thread ID used for the specific transfer path. + + reg-names: + items: + - const: target_data + - const: rt + - const: scfg + + reg: + minItems: 3 + + interrupt-names: + minItems: 1 + maxItems: 100 + items: + pattern: "^rx_[0-9]{3}$" + description: + Contains the interrupt name information for the Rx interrupt path for + secure proxy thread in the form 'rx_<PID>'. + + interrupts: + minItems: 1 + maxItems: 100 + description: + Contains the interrupt information for the Rx interrupt path for secure + proxy. + +required: + - compatible + - reg-names + - reg + - interrupt-names + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + secure_proxy: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x32c00000 0x100000>, + <0x32400000 0x100000>, + <0x32800000 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml index 5fa19d4aeaf3..6d8395d6bca0 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml @@ -20,16 +20,12 @@ properties: - const: allwinner,sun5i-a13-ir - const: allwinner,sun6i-a31-ir - items: - - const: allwinner,sun8i-a83t-ir - - const: allwinner,sun6i-a31-ir - - items: - - const: allwinner,sun8i-r40-ir - - const: allwinner,sun6i-a31-ir - - items: - - const: allwinner,sun50i-a64-ir - - const: allwinner,sun6i-a31-ir - - items: - - const: allwinner,sun50i-h6-ir + - enum: + - allwinner,sun8i-a83t-ir + - allwinner,sun8i-r40-ir + - allwinner,sun50i-a64-ir + - allwinner,sun50i-h6-ir + - allwinner,sun50i-h616-ir - const: allwinner,sun6i-a31-ir reg: diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt index cf60c5acc0e4..39c1028b2dfb 100644 --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt @@ -19,7 +19,7 @@ Required properties: Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml for details. - iommus: should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. Example: diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt index acfb50375b8a..5e53c6ab52d0 100644 --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt @@ -17,7 +17,7 @@ Required properties: Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml for details. - iommus: should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. Example: diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt index f4798d04e925..caa24943da33 100644 --- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt +++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt @@ -25,7 +25,7 @@ Required properties (DMA function blocks, child node): "mediatek,mt8173-mdp-wdma" "mediatek,mt8173-mdp-wrot" - iommus: should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. - mediatek,larb: must contain the local arbiters in the current Socs, see Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt index 8217424fd4bd..06db6837cefd 100644 --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt @@ -4,7 +4,9 @@ Mediatek Video Codec is the video codec hw present in Mediatek SoCs which supports high resolution encoding and decoding functionalities. Required properties: -- compatible : "mediatek,mt8173-vcodec-enc" for MT8173 encoder +- compatible : must be one of the following string: + "mediatek,mt8173-vcodec-enc-vp8" for mt8173 vp8 encoder. + "mediatek,mt8173-vcodec-enc" for mt8173 avc encoder. "mediatek,mt8183-vcodec-enc" for MT8183 encoder. "mediatek,mt8173-vcodec-dec" for MT8173 decoder. - reg : Physical base address of the video codec registers and length of @@ -13,12 +15,12 @@ Required properties: - mediatek,larb : must contain the local arbiters in the current Socs. - clocks : list of clock specifiers, corresponding to entries in the clock-names property. -- clock-names: encoder must contain "venc_sel_src", "venc_sel",, - "venc_lt_sel_src", "venc_lt_sel", decoder must contain "vcodecpll", - "univpll_d2", "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll", - "venc_lt_sel", "vdec_bus_clk_src". +- clock-names: avc encoder must contain "venc_sel", vp8 encoder must + contain "venc_lt_sel", decoder must contain "vcodecpll", "univpll_d2", + "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll", "venc_lt_sel", + "vdec_bus_clk_src". - iommus : should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. One of the two following nodes: - mediatek,vpu : the node of the video processor unit, if using VPU. @@ -80,14 +82,10 @@ vcodec_dec: vcodec@16000000 { assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>; }; - vcodec_enc: vcodec@18002000 { +vcodec_enc_avc: vcodec@18002000 { compatible = "mediatek,mt8173-vcodec-enc"; - reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/ - <0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/ - interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>; - mediatek,larb = <&larb3>, - <&larb5>; + reg = <0 0x18002000 0 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; iommus = <&iommu M4U_PORT_VENC_RCPU>, <&iommu M4U_PORT_VENC_REC>, <&iommu M4U_PORT_VENC_BSDMA>, @@ -98,8 +96,20 @@ vcodec_dec: vcodec@16000000 { <&iommu M4U_PORT_VENC_REF_LUMA>, <&iommu M4U_PORT_VENC_REF_CHROMA>, <&iommu M4U_PORT_VENC_NBM_RDMA>, - <&iommu M4U_PORT_VENC_NBM_WDMA>, - <&iommu M4U_PORT_VENC_RCPU_SET2>, + <&iommu M4U_PORT_VENC_NBM_WDMA>; + mediatek,larb = <&larb3>; + mediatek,vpu = <&vpu>; + clocks = <&topckgen CLK_TOP_VENC_SEL>; + clock-names = "venc_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>; + }; + +vcodec_enc_vp8: vcodec@19002000 { + compatible = "mediatek,mt8173-vcodec-enc-vp8"; + reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */ + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>; + iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>, <&iommu M4U_PORT_VENC_REC_FRM_SET2>, <&iommu M4U_PORT_VENC_BSDMA_SET2>, <&iommu M4U_PORT_VENC_SV_COMA_SET2>, @@ -108,17 +118,10 @@ vcodec_dec: vcodec@16000000 { <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>, <&iommu M4U_PORT_VENC_REF_LUMA_SET2>, <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>; + mediatek,larb = <&larb5>; mediatek,vpu = <&vpu>; - clocks = <&topckgen CLK_TOP_VENCPLL_D2>, - <&topckgen CLK_TOP_VENC_SEL>, - <&topckgen CLK_TOP_UNIVPLL1_D2>, - <&topckgen CLK_TOP_VENC_LT_SEL>; - clock-names = "venc_sel_src", - "venc_sel", - "venc_lt_sel_src", - "venc_lt_sel"; - assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>, - <&topckgen CLK_TOP_VENC_LT_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>, - <&topckgen CLK_TOP_UNIVPLL1_D2>; + clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "venc_lt_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>; }; diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml index be47a7b62ca9..d8ed480482b9 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml @@ -4,14 +4,19 @@ $id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP i.MX7 Mipi CSI2 +title: NXP i.MX7 MIPI CSI-2 receiver maintainers: - Rui Miguel Silva <rmfrfs@gmail.com> -description: | - This is the device node for the MIPI CSI-2 receiver core in i.MX7 soc. It is - compatible with previous version of samsung d-phy. +description: |- + The NXP i.MX7 SoC family includes a MIPI CSI-2 receiver IP core, documented + as "CSIS V3.3". The IP core seems to originate from Samsung, and may be + compatible with some of the Exynos4 ad S5P SoCs. + + While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is + completely wrapped by the CSIS and doesn't expose a control interface of its + own. This binding thus covers both IP cores. properties: compatible: @@ -24,8 +29,10 @@ properties: maxItems: 1 clocks: - minItems: 3 - maxItems: 3 + items: + - description: The peripheral clock (a.k.a. APB clock) + - description: The external clock (optionally used as the pixel clock) + - description: The MIPI D-PHY clock clock-names: items: @@ -37,26 +44,16 @@ properties: maxItems: 1 phy-supply: - description: - Phandle to a regulator that provides power to the PHY. This - regulator will be managed during the PHY power on/off sequence. + description: The MIPI D-PHY digital power supply resets: - maxItems: 1 - - reset-names: - const: mrst + items: + - description: MIPI D-PHY slave reset clock-frequency: - description: - The IP main (system bus) clock frequency in Hertz + description: The desired external clock ("wrap") frequency, in Hz default: 166000000 - fsl,csis-hs-settle: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Differential receiver (HS-RX) settle time - ports: $ref: /schemas/graph.yaml#/properties/ports @@ -98,7 +95,6 @@ required: - power-domains - phy-supply - resets - - reset-names - ports additionalProperties: false @@ -111,43 +107,41 @@ examples: #include <dt-bindings/reset/imx7-reset.h> mipi_csi: mipi-csi@30750000 { - compatible = "fsl,imx7-mipi-csi2"; - reg = <0x30750000 0x10000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&clks IMX7D_IPG_ROOT_CLK>, - <&clks IMX7D_MIPI_CSI_ROOT_CLK>, - <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; - clock-names = "pclk", "wrap", "phy"; - clock-frequency = <166000000>; - - power-domains = <&pgc_mipi_phy>; - phy-supply = <®_1p0d>; - resets = <&src IMX7_RESET_MIPI_PHY_MRST>; - reset-names = "mrst"; - fsl,csis-hs-settle = <3>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mipi_from_sensor: endpoint { - remote-endpoint = <&ov2680_to_mipi>; - data-lanes = <1>; - }; - }; - - port@1 { - reg = <1>; - - mipi_vc0_to_csi_mux: endpoint { - remote-endpoint = <&csi_mux_from_mipi_vc0>; - }; - }; + compatible = "fsl,imx7-mipi-csi2"; + reg = <0x30750000 0x10000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "pclk", "wrap", "phy"; + clock-frequency = <166000000>; + + power-domains = <&pgc_mipi_phy>; + phy-supply = <®_1p0d>; + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mipi_from_sensor: endpoint { + remote-endpoint = <&ov2680_to_mipi>; + data-lanes = <1>; + }; + }; + + port@1 { + reg = <1>; + + mipi_vc0_to_csi_mux: endpoint { + remote-endpoint = <&csi_mux_from_mipi_vc0>; + }; }; + }; }; ... diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml new file mode 100644 index 000000000000..5d13cbb5251b --- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX8QXP/QM JPEG decoder/encoder Device Tree Bindings + +maintainers: + - Mirela Rabulea <mirela.rabulea@nxp.com> + +description: |- + The JPEG decoder/encoder present in iMX8QXP and iMX8QM SoCs is an + ISO/IEC 10918-1 JPEG standard compliant decoder/encoder, for Baseline + and Extended Sequential DCT modes. + +properties: + compatible: + items: + - enum: + # JPEG decoder + - nxp,imx8qxp-jpgdec + # JPEG encoder + - nxp,imx8qxp-jpgenc + + reg: + maxItems: 1 + + interrupts: + description: | + There are 4 slots available in the IP, which the driver may use + If a certain slot is used, it should have an associated interrupt + The interrupt with index i is assumed to be for slot i + minItems: 1 # At least one slot is needed by the driver + maxItems: 4 # The IP has 4 slots available for use + + power-domains: + description: + List of phandle and PM domain specifier as documented in + Documentation/devicetree/bindings/power/power_domain.txt + minItems: 2 # Wrapper and 1 slot + maxItems: 5 # Wrapper and 4 slots + +required: + - compatible + - reg + - interrupts + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/firmware/imx/rsrc.h> + + jpegdec: jpegdec@58400000 { + compatible = "nxp,imx8qxp-jpgdec"; + reg = <0x58400000 0x00050000 >; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>, + <&pd IMX_SC_R_MJPEG_DEC_S0>, + <&pd IMX_SC_R_MJPEG_DEC_S1>, + <&pd IMX_SC_R_MJPEG_DEC_S2>, + <&pd IMX_SC_R_MJPEG_DEC_S3>; + }; + + jpegenc: jpegenc@58450000 { + compatible = "nxp,imx8qxp-jpgenc"; + reg = <0x58450000 0x00050000 >; + interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>, + <&pd IMX_SC_R_MJPEG_ENC_S0>, + <&pd IMX_SC_R_MJPEG_ENC_S1>, + <&pd IMX_SC_R_MJPEG_ENC_S2>, + <&pd IMX_SC_R_MJPEG_ENC_S3>; + }; +... diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt deleted file mode 100644 index 498234629e21..000000000000 --- a/Documentation/devicetree/bindings/media/qcom,camss.txt +++ /dev/null @@ -1,236 +0,0 @@ -Qualcomm Camera Subsystem - -* Properties - -- compatible: - Usage: required - Value type: <stringlist> - Definition: Should contain one of: - - "qcom,msm8916-camss" - - "qcom,msm8996-camss" - - "qcom,sdm660-camss" -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: Register ranges as listed in the reg-names property. -- reg-names: - Usage: required - Value type: <stringlist> - Definition: Should contain the following entries: - - "csiphy0" - - "csiphy0_clk_mux" - - "csiphy1" - - "csiphy1_clk_mux" - - "csiphy2" (8996 only) - - "csiphy2_clk_mux" (8996 only) - - "csid0" - - "csid1" - - "csid2" (8996 only) - - "csid3" (8996 only) - - "ispif" - - "csi_clk_mux" - - "vfe0" - - "vfe1" (8996 only) -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: Interrupts as listed in the interrupt-names property. -- interrupt-names: - Usage: required - Value type: <stringlist> - Definition: Should contain the following entries: - - "csiphy0" - - "csiphy1" - - "csiphy2" (8996 only) - - "csid0" - - "csid1" - - "csid2" (8996 only) - - "csid3" (8996 only) - - "ispif" - - "vfe0" - - "vfe1" (8996 only) -- power-domains: - Usage: required - Value type: <prop-encoded-array> - Definition: A phandle and power domain specifier pairs to the - power domain which is responsible for collapsing - and restoring power to the peripheral. -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: A list of phandle and clock specifier pairs as listed - in clock-names property. -- clock-names: - Usage: required - Value type: <stringlist> - Definition: Should contain the following entries: - - "top_ahb" - - "throttle_axi" (660 only) - - "ispif_ahb" - - "csiphy0_timer" - - "csiphy1_timer" - - "csiphy2_timer" (8996 only) - - "csiphy_ahb2crif" (660 only) - - "csi0_ahb" - - "csi0" - - "csi0_phy" - - "csi0_pix" - - "csi0_rdi" - - "cphy_csid0" (660 only) - - "csi1_ahb" - - "csi1" - - "csi1_phy" - - "csi1_pix" - - "csi1_rdi" - - "cphy_csid1" (660 only) - - "csi2_ahb" (8996 only) - - "csi2" (8996 only) - - "csi2_phy" (8996 only) - - "csi2_pix" (8996 only) - - "csi2_rdi" (8996 only) - - "cphy_csid2" (660 only) - - "csi3_ahb" (8996 only) - - "csi3" (8996 only) - - "csi3_phy" (8996 only) - - "csi3_pix" (8996 only) - - "csi3_rdi" (8996 only) - - "cphy_csid3" (660 only) - - "ahb" - - "vfe0" - - "csi_vfe0" - - "vfe0_ahb", (8996 only) - - "vfe0_stream", (8996 only) - - "vfe1", (8996 only) - - "csi_vfe1", (8996 only) - - "vfe1_ahb", (8996 only) - - "vfe1_stream", (8996 only) - - "vfe_ahb" - - "vfe_axi" -- vdda-supply: - Usage: required - Value type: <phandle> - Definition: A phandle to voltage supply for CSI2. -- iommus: - Usage: required - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. - -* Nodes - -- ports: - Usage: required - Definition: As described in video-interfaces.txt in same directory. - Properties: - - reg: - Usage: required - Value type: <u32> - Definition: Selects CSI2 PHY interface - PHY0, PHY1 - or PHY2 (8996 only) - Endpoint node properties: - - clock-lanes: - Usage: required - Value type: <u32> - Definition: The physical clock lane index. On 8916 - the value must always be <1> as the physical - clock lane is lane 1. On 8996 the value must - always be <7> as the hardware supports D-PHY - and C-PHY, indexes are in a common set and - D-PHY physical clock lane is labeled as 7. - - data-lanes: - Usage: required - Value type: <prop-encoded-array> - Definition: An array of physical data lanes indexes. - Position of an entry determines the logical - lane number, while the value of an entry - indicates physical lane index. Lane swapping - is supported. Physical lane indexes for - 8916: 0, 2, 3, 4; for 8996: 0, 1, 2, 3. - -* An Example - - camss: camss@1b00000 { - compatible = "qcom,msm8916-camss"; - reg = <0x1b0ac00 0x200>, - <0x1b00030 0x4>, - <0x1b0b000 0x200>, - <0x1b00038 0x4>, - <0x1b08000 0x100>, - <0x1b08400 0x100>, - <0x1b0a000 0x500>, - <0x1b00020 0x10>, - <0x1b10000 0x1000>; - reg-names = "csiphy0", - "csiphy0_clk_mux", - "csiphy1", - "csiphy1_clk_mux", - "csid0", - "csid1", - "ispif", - "csi_clk_mux", - "vfe0"; - interrupts = <GIC_SPI 78 0>, - <GIC_SPI 79 0>, - <GIC_SPI 51 0>, - <GIC_SPI 52 0>, - <GIC_SPI 55 0>, - <GIC_SPI 57 0>; - interrupt-names = "csiphy0", - "csiphy1", - "csid0", - "csid1", - "ispif", - "vfe0"; - power-domains = <&gcc VFE_GDSC>; - clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, - <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, - <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, - <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, - <&gcc GCC_CAMSS_CSI0_AHB_CLK>, - <&gcc GCC_CAMSS_CSI0_CLK>, - <&gcc GCC_CAMSS_CSI0PHY_CLK>, - <&gcc GCC_CAMSS_CSI0PIX_CLK>, - <&gcc GCC_CAMSS_CSI0RDI_CLK>, - <&gcc GCC_CAMSS_CSI1_AHB_CLK>, - <&gcc GCC_CAMSS_CSI1_CLK>, - <&gcc GCC_CAMSS_CSI1PHY_CLK>, - <&gcc GCC_CAMSS_CSI1PIX_CLK>, - <&gcc GCC_CAMSS_CSI1RDI_CLK>, - <&gcc GCC_CAMSS_AHB_CLK>, - <&gcc GCC_CAMSS_VFE0_CLK>, - <&gcc GCC_CAMSS_CSI_VFE0_CLK>, - <&gcc GCC_CAMSS_VFE_AHB_CLK>, - <&gcc GCC_CAMSS_VFE_AXI_CLK>; - clock-names = "top_ahb", - "ispif_ahb", - "csiphy0_timer", - "csiphy1_timer", - "csi0_ahb", - "csi0", - "csi0_phy", - "csi0_pix", - "csi0_rdi", - "csi1_ahb", - "csi1", - "csi1_phy", - "csi1_pix", - "csi1_rdi", - "ahb", - "vfe0", - "csi_vfe0", - "vfe_ahb", - "vfe_axi"; - vdda-supply = <&pm8916_l2>; - iommus = <&apps_iommu 3>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - csiphy0_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 2>; - remote-endpoint = <&ov5645_ep>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml new file mode 100644 index 000000000000..304908072d72 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml @@ -0,0 +1,256 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + - Todor Tomov <todor.too@gmail.com> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,msm8916-camss + + clocks: + minItems: 19 + maxItems: 19 + + clock-names: + items: + - const: top_ahb + - const: ispif_ahb + - const: csiphy0_timer + - const: csiphy1_timer + - const: csi0_ahb + - const: csi0 + - const: csi0_phy + - const: csi0_pix + - const: csi0_rdi + - const: csi1_ahb + - const: csi1 + - const: csi1_phy + - const: csi1_pix + - const: csi1_rdi + - const: ahb + - const: vfe0 + - const: csi_vfe0 + - const: vfe_ahb + - const: vfe_axi + + interrupts: + minItems: 6 + maxItems: 6 + + interrupt-names: + items: + - const: csiphy0 + - const: csiphy1 + - const: csid0 + - const: csid1 + - const: ispif + - const: vfe0 + + iommus: + maxItems: 1 + + power-domains: + items: + - description: VFE GDSC - Video Front End, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + items: + - const: 1 + + data-lanes: + description: + An array of physical data lanes indexes. + Position of an entry determines the logical + lane number, while the value of an entry + indicates physical lane index. Lane swapping + is supported. Physical lane indexes; + 0, 2, 3, 4. + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + items: + - const: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + reg: + minItems: 9 + maxItems: 9 + + reg-names: + items: + - const: csiphy0 + - const: csiphy0_clk_mux + - const: csiphy1 + - const: csiphy1_clk_mux + - const: csid0 + - const: csid1 + - const: ispif + - const: csi_clk_mux + - const: vfe0 + + vdda-supply: + description: + Definition of the regulator used as analog power supply. + +required: + - clock-names + - clocks + - compatible + - interrupt-names + - interrupts + - iommus + - power-domains + - reg + - reg-names + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + + camss: camss@1b00000 { + compatible = "qcom,msm8916-camss"; + + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI0_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0_CLK>, + <&gcc GCC_CAMSS_CSI0PHY_CLK>, + <&gcc GCC_CAMSS_CSI0PIX_CLK>, + <&gcc GCC_CAMSS_CSI0RDI_CLK>, + <&gcc GCC_CAMSS_CSI1_AHB_CLK>, + <&gcc GCC_CAMSS_CSI1_CLK>, + <&gcc GCC_CAMSS_CSI1PHY_CLK>, + <&gcc GCC_CAMSS_CSI1PIX_CLK>, + <&gcc GCC_CAMSS_CSI1RDI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_CLK>, + <&gcc GCC_CAMSS_CSI_VFE0_CLK>, + <&gcc GCC_CAMSS_VFE_AHB_CLK>, + <&gcc GCC_CAMSS_VFE_AXI_CLK>; + + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe_ahb", + "vfe_axi"; + + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "csiphy0", + "csiphy1", + "csid0", + "csid1", + "ispif", + "vfe0"; + + iommus = <&apps_iommu 3>; + + power-domains = <&gcc VFE_GDSC>; + + reg = <0x01b0ac00 0x200>, + <0x01b00030 0x4>, + <0x01b0b000 0x200>, + <0x01b00038 0x4>, + <0x01b08000 0x100>, + <0x01b08400 0x100>, + <0x01b0a000 0x500>, + <0x01b00020 0x10>, + <0x01b10000 0x1000>; + + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csid0", + "csid1", + "ispif", + "csi_clk_mux", + "vfe0"; + + vdda-supply = <®_2v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + + }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml new file mode 100644 index 000000000000..38be41e932f0 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml @@ -0,0 +1,387 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + - Todor Tomov <todor.too@gmail.com> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,msm8996-camss + + clocks: + minItems: 36 + maxItems: 36 + + clock-names: + items: + - const: top_ahb + - const: ispif_ahb + - const: csiphy0_timer + - const: csiphy1_timer + - const: csiphy2_timer + - const: csi0_ahb + - const: csi0 + - const: csi0_phy + - const: csi0_pix + - const: csi0_rdi + - const: csi1_ahb + - const: csi1 + - const: csi1_phy + - const: csi1_pix + - const: csi1_rdi + - const: csi2_ahb + - const: csi2 + - const: csi2_phy + - const: csi2_pix + - const: csi2_rdi + - const: csi3_ahb + - const: csi3 + - const: csi3_phy + - const: csi3_pix + - const: csi3_rdi + - const: ahb + - const: vfe0 + - const: csi_vfe0 + - const: vfe0_ahb + - const: vfe0_stream + - const: vfe1 + - const: csi_vfe1 + - const: vfe1_ahb + - const: vfe1_stream + - const: vfe_ahb + - const: vfe_axi + + interrupts: + minItems: 10 + maxItems: 10 + + interrupt-names: + items: + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid3 + - const: ispif + - const: vfe0 + - const: vfe1 + + iommus: + maxItems: 4 + + power-domains: + items: + - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller. + - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + items: + - const: 7 + + data-lanes: + description: + An array of physical data lanes indexes. + Position of an entry determines the logical + lane number, while the value of an entry + indicates physical lane index. Lane swapping + is supported. Physical lane indexes are; + 0, 1, 2, 3 + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + items: + - const: 7 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + items: + - const: 7 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + items: + - const: 7 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + reg: + minItems: 14 + maxItems: 14 + + reg-names: + items: + - const: csiphy0 + - const: csiphy0_clk_mux + - const: csiphy1 + - const: csiphy1_clk_mux + - const: csiphy2 + - const: csiphy2_clk_mux + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid3 + - const: ispif + - const: csi_clk_mux + - const: vfe0 + - const: vfe1 + + vdda-supply: + description: + Definition of the regulator used as analog power supply. + +required: + - clock-names + - clocks + - compatible + - interrupt-names + - interrupts + - iommus + - power-domains + - reg + - reg-names + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + #include <dt-bindings/clock/qcom,mmcc-msm8996.h> + + camss: camss@a00000 { + compatible = "qcom,msm8996-camss"; + + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CSI0PHY_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CSI1PHY_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CSI2PHY_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CSI3PHY_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_AHB_CLK>, + <&mmcc CAMSS_VFE_AXI_CLK>; + + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe0_ahb", + "vfe0_stream", + "vfe1", + "csi_vfe1", + "vfe1_ahb", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; + + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "vfe0", + "vfe1"; + + iommus = <&vfe_smmu 0>, + <&vfe_smmu 1>, + <&vfe_smmu 2>, + <&vfe_smmu 3>; + + power-domains = <&mmcc VFE0_GDSC>, + <&mmcc VFE1_GDSC>; + + reg = <0x00a34000 0x1000>, + <0x00a00030 0x4>, + <0x00a35000 0x1000>, + <0x00a00038 0x4>, + <0x00a36000 0x1000>, + <0x00a00040 0x4>, + <0x00a30000 0x100>, + <0x00a30400 0x100>, + <0x00a30800 0x100>, + <0x00a30c00 0x100>, + <0x00a31000 0x500>, + <0x00a00020 0x10>, + <0x00a10000 0x1000>, + <0x00a14000 0x1000>; + + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "csi_clk_mux", + "vfe0", + "vfe1"; + + vdda-supply = <®_2v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml new file mode 100644 index 000000000000..841a1aafdd13 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml @@ -0,0 +1,398 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,sdm660-camss + + clocks: + minItems: 42 + maxItems: 42 + + clock-names: + items: + - const: ahb + - const: cphy_csid0 + - const: cphy_csid1 + - const: cphy_csid2 + - const: cphy_csid3 + - const: csi0_ahb + - const: csi0 + - const: csi0_phy + - const: csi0_pix + - const: csi0_rdi + - const: csi1_ahb + - const: csi1 + - const: csi1_phy + - const: csi1_pix + - const: csi1_rdi + - const: csi2_ahb + - const: csi2 + - const: csi2_phy + - const: csi2_pix + - const: csi2_rdi + - const: csi3_ahb + - const: csi3 + - const: csi3_phy + - const: csi3_pix + - const: csi3_rdi + - const: csiphy0_timer + - const: csiphy1_timer + - const: csiphy2_timer + - const: csiphy_ahb2crif + - const: csi_vfe0 + - const: csi_vfe1 + - const: ispif_ahb + - const: throttle_axi + - const: top_ahb + - const: vfe0_ahb + - const: vfe0 + - const: vfe0_stream + - const: vfe1_ahb + - const: vfe1 + - const: vfe1_stream + - const: vfe_ahb + - const: vfe_axi + + interrupts: + minItems: 10 + maxItems: 10 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid3 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: ispif + - const: vfe0 + - const: vfe1 + + iommus: + maxItems: 4 + + power-domains: + items: + - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller. + - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + items: + - const: 7 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + items: + - const: 7 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + items: + - const: 7 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + items: + - const: 7 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + reg: + minItems: 14 + maxItems: 14 + + reg-names: + items: + - const: csi_clk_mux + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid3 + - const: csiphy0 + - const: csiphy0_clk_mux + - const: csiphy1 + - const: csiphy1_clk_mux + - const: csiphy2 + - const: csiphy2_clk_mux + - const: ispif + - const: vfe0 + - const: vfe1 + + vdda-supply: + description: + Definition of the regulator used as analog power supply. + +required: + - clock-names + - clocks + - compatible + - interrupt-names + - interrupts + - iommus + - power-domains + - reg + - reg-names + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-sdm660.h> + #include <dt-bindings/clock/qcom,mmcc-sdm660.h> + + camss: camss@ca00000 { + compatible = "qcom,sdm660-camss"; + + clocks = <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CSIPHY_AHB2CRIF_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc THROTTLE_CAMSS_AXI_CLK>, + <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>; + + clock-names = "ahb", + "cphy_csid0", + "cphy_csid1", + "cphy_csid2", + "cphy_csid3", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csiphy_ahb2crif", + "csi_vfe0", + "csi_vfe1", + "ispif_ahb", + "throttle_axi", + "top_ahb", + "vfe0_ahb", + "vfe0", + "vfe0_stream", + "vfe1_ahb", + "vfe1", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; + + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "csid0", + "csid1", + "csid2", + "csid3", + "csiphy0", + "csiphy1", + "csiphy2", + "ispif", + "vfe0", + "vfe1"; + + iommus = <&mmss_smmu 0xc00>, + <&mmss_smmu 0xc01>, + <&mmss_smmu 0xc02>, + <&mmss_smmu 0xc03>; + + power-domains = <&mmcc CAMSS_VFE0_GDSC>, + <&mmcc CAMSS_VFE1_GDSC>; + + reg = <0x0ca00020 0x10>, + <0x0ca30000 0x100>, + <0x0ca30400 0x100>, + <0x0ca30800 0x100>, + <0x0ca30c00 0x100>, + <0x0c824000 0x1000>, + <0x0ca00120 0x4>, + <0x0c825000 0x1000>, + <0x0ca00124 0x4>, + <0x0c826000 0x1000>, + <0x0ca00128 0x4>, + <0x0ca31000 0x500>, + <0x0ca10000 0x1000>, + <0x0ca14000 0x1000>; + + reg-names = "csi_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "ispif", + "vfe0", + "vfe1"; + + vdda-supply = <®_2v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml new file mode 100644 index 000000000000..9ca5dfa7f226 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml @@ -0,0 +1,371 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,sdm845-camss + + clocks: + minItems: 36 + maxItems: 36 + + clock-names: + items: + - const: camnoc_axi + - const: cpas_ahb + - const: cphy_rx_src + - const: csi0 + - const: csi0_src + - const: csi1 + - const: csi1_src + - const: csi2 + - const: csi2_src + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy0_timer_src + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy1_timer_src + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy2_timer_src + - const: csiphy3 + - const: csiphy3_timer + - const: csiphy3_timer_src + - const: gcc_camera_ahb + - const: gcc_camera_axi + - const: slow_ahb_src + - const: soc_ahb + - const: vfe0_axi + - const: vfe0 + - const: vfe0_cphy_rx + - const: vfe0_src + - const: vfe1_axi + - const: vfe1 + - const: vfe1_cphy_rx + - const: vfe1_src + - const: vfe_lite + - const: vfe_lite_cphy_rx + - const: vfe_lite_src + + interrupts: + minItems: 10 + maxItems: 10 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: vfe0 + - const: vfe1 + - const: vfe_lite + + iommus: + maxItems: 4 + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + items: + - const: 7 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + reg: + minItems: 10 + maxItems: 10 + + reg-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: vfe0 + - const: vfe1 + - const: vfe_lite + + vdda-supply: + description: + Definition of the regulator used as analog power supply. + +required: + - clock-names + - clocks + - compatible + - interrupt-names + - interrupts + - iommus + - power-domains + - reg + - reg-names + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,camcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + camss: camss@a00000 { + compatible = "qcom,sdm845-camss"; + + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY0_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY1_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY2_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY3_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK>, + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>; + + clock-names = "camnoc_axi", + "cpas_ahb", + "cphy_rx_src", + "csi0", + "csi0_src", + "csi1", + "csi1_src", + "csi2", + "csi2_src", + "csiphy0", + "csiphy0_timer", + "csiphy0_timer_src", + "csiphy1", + "csiphy1_timer", + "csiphy1_timer_src", + "csiphy2", + "csiphy2_timer", + "csiphy2_timer_src", + "csiphy3", + "csiphy3_timer", + "csiphy3_timer_src", + "gcc_camera_ahb", + "gcc_camera_axi", + "slow_ahb_src", + "soc_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_src", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_src", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_src"; + + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + iommus = <&apps_smmu 0x0808 0x0>, + <&apps_smmu 0x0810 0x8>, + <&apps_smmu 0x0c08 0x0>, + <&apps_smmu 0x0c10 0x8>; + + power-domains = <&clock_camcc IFE_0_GDSC>, + <&clock_camcc IFE_1_GDSC>, + <&clock_camcc TITAN_TOP_GDSC>; + + reg = <0 0xacb3000 0 0x1000>, + <0 0xacba000 0 0x1000>, + <0 0xacc8000 0 0x1000>, + <0 0xac65000 0 0x1000>, + <0 0xac66000 0 0x1000>, + <0 0xac67000 0 0x1000>, + <0 0xac68000 0 0x1000>, + <0 0xacaf000 0 0x4000>, + <0 0xacb6000 0 0x4000>, + <0 0xacc4000 0 0x4000>; + + reg-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + vdda-supply = <®_2v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml new file mode 100644 index 000000000000..7b81bd7f2399 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sm8250-venus.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + compatible: + const: qcom,sm8250-venus + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + minItems: 2 + maxItems: 3 + + power-domain-names: + minItems: 2 + maxItems: 3 + items: + - const: venus + - const: vcodec0 + - const: mx + + clocks: + maxItems: 3 + + clock-names: + items: + - const: iface + - const: core + - const: vcodec0_core + + iommus: + maxItems: 1 + + memory-region: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: cpu-cfg + - const: video-mem + + resets: + maxItems: 2 + + reset-names: + items: + - const: bus + - const: core + + video-decoder: + type: object + + properties: + compatible: + const: venus-decoder + + required: + - compatible + + additionalProperties: false + + video-encoder: + type: object + + properties: + compatible: + const: venus-encoder + + required: + - compatible + + additionalProperties: false + + video-firmware: + type: object + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - compatible + - reg + - interrupts + - power-domains + - power-domain-names + - clocks + - clock-names + - interconnects + - interconnect-names + - iommus + - memory-region + - resets + - reset-names + - video-decoder + - video-encoder + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sm8250.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + venus: video-codec@aa00000 { + compatible = "qcom,sm8250-venus"; + reg = <0x0aa00000 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc MVS0C_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SM8250_MX>; + power-domain-names = "venus", "vcodec0", "mx"; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", "core", "vcodec0_core"; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>, + <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "cpu-cfg", "video-mem"; + + iommus = <&apps_smmu 0x2100 0x0400>; + memory-region = <&video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>, + <&videocc VIDEO_CC_MVS0C_CLK_ARES>; + reset-names = "bus", "core"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index 946441b4e1a5..af9e7e59e5a1 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -90,9 +90,12 @@ properties: - rc-leadtek-y04g0051 - rc-lme2510 - rc-manli + - rc-mecool-kii-pro + - rc-mecool-kiii-pro - rc-medion-x10 - rc-medion-x10-digitainer - rc-medion-x10-or2x + - rc-minix-neo - rc-msi-digivox-ii - rc-msi-digivox-iii - rc-msi-tvanywhere @@ -145,11 +148,13 @@ properties: - rc-videomate-s350 - rc-videomate-tv-pvr - rc-videostrong-kii-pro + - rc-vega-s9x - rc-wetek-hub - rc-wetek-play2 - rc-winfast - rc-winfast-usbii-deluxe - rc-x96max + - rc-xbox-360 - rc-xbox-dvd - rc-zx-irdec diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt deleted file mode 100644 index 0d8974aa8b38..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,drif.txt +++ /dev/null @@ -1,177 +0,0 @@ -Renesas R-Car Gen3 Digital Radio Interface controller (DRIF) ------------------------------------------------------------- - -R-Car Gen3 DRIF is a SPI like receive only slave device. A general -representation of DRIF interfacing with a master device is shown below. - -+---------------------+ +---------------------+ -| |-----SCK------->|CLK | -| Master |-----SS-------->|SYNC DRIFn (slave) | -| |-----SD0------->|D0 | -| |-----SD1------->|D1 | -+---------------------+ +---------------------+ - -As per datasheet, each DRIF channel (drifn) is made up of two internal -channels (drifn0 & drifn1). These two internal channels share the common -CLK & SYNC. Each internal channel has its own dedicated resources like -irq, dma channels, address space & clock. This internal split is not -visible to the external master device. - -The device tree model represents each internal channel as a separate node. -The internal channels sharing the CLK & SYNC are tied together by their -phandles using a property called "renesas,bonding". For the rest of -the documentation, unless explicitly stated, the word channel implies an -internal channel. - -When both internal channels are enabled they need to be managed together -as one (i.e.) they cannot operate alone as independent devices. Out of the -two, one of them needs to act as a primary device that accepts common -properties of both the internal channels. This channel is identified by a -property called "renesas,primary-bond". - -To summarize, - - When both the internal channels that are bonded together are enabled, - the zeroth channel is selected as primary-bond. This channels accepts - properties common to all the members of the bond. - - When only one of the bonded channels need to be enabled, the property - "renesas,bonding" or "renesas,primary-bond" will have no effect. That - enabled channel can act alone as any other independent device. - -Required properties of an internal channel: -------------------------------------------- -- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC. - "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC. - "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: offset and length of that channel. -- interrupts: associated with that channel. -- clocks: phandle and clock specifier of that channel. -- clock-names: clock input name string: "fck". -- dmas: phandles to the DMA channels. -- dma-names: names of the DMA channel: "rx". -- renesas,bonding: phandle to the other channel. - -Optional properties of an internal channel: -------------------------------------------- -- power-domains: phandle to the respective power domain. - -Required properties of an internal channel when: - - It is the only enabled channel of the bond (or) - - If it acts as primary among enabled bonds --------------------------------------------------------- -- pinctrl-0: pin control group to be used for this channel. -- pinctrl-names: must be "default". -- renesas,primary-bond: empty property indicating the channel acts as primary - among the bonded channels. -- port: child port node corresponding to the data input, in accordance with - the video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The port - node must contain at least one endpoint. - -Optional endpoint property: ---------------------------- -- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively. - This property maps to SYNCAC bit in the hardware manual. The - default is 1 (active high). - -Example: --------- - -(1) Both internal channels enabled: ------------------------------------ - -When interfacing with a third party tuner device with two data pins as shown -below. - -+---------------------+ +---------------------+ -| |-----SCK------->|CLK | -| Master |-----SS-------->|SYNC DRIFn (slave) | -| |-----SD0------->|D0 | -| |-----SD1------->|D1 | -+---------------------+ +---------------------+ - - drif00: rif@e6f40000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f40000 0 0x64>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 515>; - clock-names = "fck"; - dmas = <&dmac1 0x20>, <&dmac2 0x20>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif01>; - renesas,primary-bond; - pinctrl-0 = <&drif0_pins>; - pinctrl-names = "default"; - port { - drif0_ep: endpoint { - remote-endpoint = <&tuner_ep>; - }; - }; - }; - - drif01: rif@e6f50000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f50000 0 0x64>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 514>; - clock-names = "fck"; - dmas = <&dmac1 0x22>, <&dmac2 0x22>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif00>; - }; - - -(2) Internal channel 1 alone is enabled: ----------------------------------------- - -When interfacing with a third party tuner device with one data pin as shown -below. - -+---------------------+ +---------------------+ -| |-----SCK------->|CLK | -| Master |-----SS-------->|SYNC DRIFn (slave) | -| | |D0 (unused) | -| |-----SD-------->|D1 | -+---------------------+ +---------------------+ - - drif00: rif@e6f40000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f40000 0 0x64>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 515>; - clock-names = "fck"; - dmas = <&dmac1 0x20>, <&dmac2 0x20>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif01>; - }; - - drif01: rif@e6f50000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f50000 0 0x64>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 514>; - clock-names = "fck"; - dmas = <&dmac1 0x22>, <&dmac2 0x22>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif00>; - pinctrl-0 = <&drif0_pins>; - pinctrl-names = "default"; - port { - drif0_ep: endpoint { - remote-endpoint = <&tuner_ep>; - sync-active = <0>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml new file mode 100644 index 000000000000..f1bdaeab4053 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml @@ -0,0 +1,279 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,drif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF) + +maintainers: + - Ramesh Shanmugasundaram <rashanmu@gmail.com> + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + +description: | + R-Car Gen3 DRIF is a SPI like receive only slave device. A general + representation of DRIF interfacing with a master device is shown below. + + +---------------------+ +---------------------+ + | |-----SCK------->|CLK | + | Master |-----SS-------->|SYNC DRIFn (slave) | + | |-----SD0------->|D0 | + | |-----SD1------->|D1 | + +---------------------+ +---------------------+ + + As per datasheet, each DRIF channel (drifn) is made up of two internal + channels (drifn0 & drifn1). These two internal channels share the common + CLK & SYNC. Each internal channel has its own dedicated resources like + irq, dma channels, address space & clock. This internal split is not + visible to the external master device. + + The device tree model represents each internal channel as a separate node. + The internal channels sharing the CLK & SYNC are tied together by their + phandles using a property called "renesas,bonding". For the rest of + the documentation, unless explicitly stated, the word channel implies an + internal channel. + + When both internal channels are enabled they need to be managed together + as one (i.e.) they cannot operate alone as independent devices. Out of the + two, one of them needs to act as a primary device that accepts common + properties of both the internal channels. This channel is identified by a + property called "renesas,primary-bond". + + To summarize, + * When both the internal channels that are bonded together are enabled, + the zeroth channel is selected as primary-bond. This channels accepts + properties common to all the members of the bond. + * When only one of the bonded channels need to be enabled, the property + "renesas,bonding" or "renesas,primary-bond" will have no effect. That + enabled channel can act alone as any other independent device. + +properties: + compatible: + items: + - enum: + - renesas,r8a7795-drif # R-Car H3 + - renesas,r8a7796-drif # R-Car M3-W + - renesas,r8a77965-drif # R-Car M3-N + - renesas,r8a77990-drif # R-Car E3 + - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + items: + - const: fck + + resets: + maxItems: 1 + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + minItems: 1 + maxItems: 2 + items: + - const: rx + - const: rx + + renesas,bonding: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle to the other internal channel of DRIF + + power-domains: + maxItems: 1 + + renesas,primary-bond: + type: boolean + description: + Indicates that the channel acts as primary among the bonded channels. + + port: + type: object + description: + Child port node corresponding to the data input, in accordance with the + video interface bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + The port node must contain at least one endpoint. + + properties: + endpoint: + type: object + + properties: + remote-endpoint: + description: + A phandle to the remote tuner endpoint subnode in remote node + port. + + sync-active: + enum: [0, 1] + description: + Indicates sync signal polarity, 0/1 for low/high respectively. + This property maps to SYNCAC bit in the hardware manual. The + default is 1 (active high). + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - dmas + - dma-names + - renesas,bonding + - power-domains + +allOf: + - if: + required: + - renesas,primary-bond + then: + required: + - pinctrl-0 + - pinctrl-names + - port + + - if: + required: + - port + then: + required: + - pinctrl-0 + - pinctrl-names + else: + properties: + pinctrl-0: false + pinctrl-names: false + +additionalProperties: false + +examples: + # Example with both internal channels enabled. + # + # When interfacing with a third party tuner device with two data pins as shown + # below. + # + # +---------------------+ +---------------------+ + # | |-----SCK------->|CLK | + # | Master |-----SS-------->|SYNC DRIFn (slave) | + # | |-----SD0------->|D0 | + # | |-----SD1------->|D1 | + # +---------------------+ +---------------------+ + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + drif00: rif@e6f40000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f40000 0 0x64>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>; + clock-names = "fck"; + dmas = <&dmac1 0x20>, <&dmac2 0x20>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + renesas,bonding = <&drif01>; + resets = <&cpg 515>; + renesas,primary-bond; + pinctrl-0 = <&drif0_pins>; + pinctrl-names = "default"; + port { + drif0_ep: endpoint { + remote-endpoint = <&tuner_ep>; + }; + }; + }; + + drif01: rif@e6f50000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f50000 0 0x64>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>; + clock-names = "fck"; + dmas = <&dmac1 0x22>, <&dmac2 0x22>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + renesas,bonding = <&drif00>; + resets = <&cpg 514>; + }; + }; + + # Example with internal channel 1 alone enabled. + # + # When interfacing with a third party tuner device with one data pin as shown + # below. + # + # +---------------------+ +---------------------+ + # | |-----SCK------->|CLK | + # | Master |-----SS-------->|SYNC DRIFn (slave) | + # | | |D0 (unused) | + # | |-----SD-------->|D1 | + # +---------------------+ +---------------------+ + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + drif10: rif@e6f60000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f60000 0 0x64>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 513>; + clock-names = "fck"; + dmas = <&dmac1 0x24>, <&dmac2 0x24>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 513>; + renesas,bonding = <&drif11>; + status = "disabled"; + }; + + drif11: rif@e6f70000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f70000 0 0x64>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 512>; + clock-names = "fck"; + dmas = <&dmac1 0x26>, <&dmac2 0x26>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 512>; + renesas,bonding = <&drif10>; + pinctrl-0 = <&drif1_pins>; + pinctrl-names = "default"; + port { + drif1_ep: endpoint { + remote-endpoint = <&tuner_ep1>; + sync-active = <0>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index fe7c4cbfe4ba..dd1a5ce5896c 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -193,23 +193,35 @@ required: - interrupts - clocks - power-domains - - resets - -if: - properties: - compatible: - contains: - enum: - - renesas,vin-r8a7778 - - renesas,vin-r8a7779 - - renesas,rcar-gen2-vin -then: - required: - - port -else: - required: - - renesas,id - - ports + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - renesas,vin-r8a7778 + - renesas,vin-r8a7779 + then: + required: + - resets + + - if: + properties: + compatible: + contains: + enum: + - renesas,vin-r8a7778 + - renesas,vin-r8a7779 + - renesas,rcar-gen2-vin + then: + required: + - port + else: + required: + - renesas,id + - ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml index 0a7a73fd59f2..4391dce2caee 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.yaml +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml @@ -215,130 +215,3 @@ properties: CCP2, for instance. additionalProperties: true - -examples: - # The example snippet below describes two data pipelines. ov772x and imx074 - # are camera sensors with a parallel and serial (MIPI CSI-2) video bus - # respectively. Both sensors are on the I2C control bus corresponding to the - # i2c0 controller node. ov772x sensor is linked directly to the ceu0 video - # host interface. imx074 is linked to ceu0 through the MIPI CSI-2 receiver - # (csi2). ceu0 has a (single) DMA engine writing captured data to memory. - # ceu0 node has a single 'port' node which may indicate that at any time - # only one of the following data pipelines can be active: - # ov772x -> ceu0 or imx074 -> csi2 -> ceu0. - - | - ceu@fe910000 { - compatible = "renesas,sh-mobile-ceu"; - reg = <0xfe910000 0xa0>; - interrupts = <0x880>; - - mclk: master_clock { - compatible = "renesas,ceu-clock"; - #clock-cells = <1>; - clock-frequency = <50000000>; /* Max clock frequency */ - clock-output-names = "mclk"; - }; - - port { - #address-cells = <1>; - #size-cells = <0>; - - /* Parallel bus endpoint */ - ceu0_1: endpoint@1 { - reg = <1>; /* Local endpoint # */ - remote-endpoint = <&ov772x_1_1>; /* Remote phandle */ - bus-width = <8>; /* Used data lines */ - data-shift = <2>; /* Lines 9:2 are used */ - - /* If hsync-active/vsync-active are missing, - embedded BT.656 sync is used */ - hsync-active = <0>; /* Active low */ - vsync-active = <0>; /* Active low */ - data-active = <1>; /* Active high */ - pclk-sample = <1>; /* Rising */ - }; - - /* MIPI CSI-2 bus endpoint */ - ceu0_0: endpoint@0 { - reg = <0>; - remote-endpoint = <&csi2_2>; - }; - }; - }; - - i2c { - #address-cells = <1>; - #size-cells = <0>; - - camera@21 { - compatible = "ovti,ov772x"; - reg = <0x21>; - vddio-supply = <®ulator1>; - vddcore-supply = <®ulator2>; - - clock-frequency = <20000000>; - clocks = <&mclk 0>; - clock-names = "xclk"; - - port { - /* With 1 endpoint per port no need for addresses. */ - ov772x_1_1: endpoint { - bus-width = <8>; - remote-endpoint = <&ceu0_1>; - hsync-active = <1>; - vsync-active = <0>; /* Who came up with an - inverter here ?... */ - data-active = <1>; - pclk-sample = <1>; - }; - }; - }; - - camera@1a { - compatible = "sony,imx074"; - reg = <0x1a>; - vddio-supply = <®ulator1>; - vddcore-supply = <®ulator2>; - - clock-frequency = <30000000>; /* Shared clock with ov772x_1 */ - clocks = <&mclk 0>; - clock-names = "sysclk"; /* Assuming this is the - name in the datasheet */ - port { - imx074_1: endpoint { - clock-lanes = <0>; - data-lanes = <1 2>; - remote-endpoint = <&csi2_1>; - }; - }; - }; - }; - - csi2: csi2@ffc90000 { - compatible = "renesas,sh-mobile-csi2"; - reg = <0xffc90000 0x1000>; - interrupts = <0x17a0>; - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */ - reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S, - PHY_M has port address 0, - is unused. */ - csi2_1: endpoint { - clock-lanes = <0>; - data-lanes = <2 1>; - remote-endpoint = <&imx074_1>; - }; - }; - port@2 { - reg = <2>; /* port 2: link to the CEU */ - - csi2_2: endpoint { - remote-endpoint = <&ceu0_0>; - }; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt deleted file mode 100644 index 63b9dc913e45..000000000000 --- a/Documentation/devicetree/bindings/media/video-mux.txt +++ /dev/null @@ -1,60 +0,0 @@ -Video Multiplexer -================= - -Video multiplexers allow to select between multiple input ports. Video received -on the active input port is passed through to the output port. Muxes described -by this binding are controlled by a multiplexer controller that is described by -the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt - -Required properties: -- compatible : should be "video-mux" -- mux-controls : mux controller node to use for operating the mux -- #address-cells: should be <1> -- #size-cells: should be <0> -- port@*: at least three port nodes containing endpoints connecting to the - source and sink devices according to of_graph bindings. The last port is - the output port, all others are inputs. - -Optionally, #address-cells, #size-cells, and port nodes can be grouped under a -ports node as described in Documentation/devicetree/bindings/graph.txt. - -Example: - - mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; - - mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - }; - - video-mux { - compatible = "video-mux"; - mux-controls = <&mux>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mux_in0: endpoint { - remote-endpoint = <&video_source0_out>; - }; - }; - - port@1 { - reg = <1>; - - mux_in1: endpoint { - remote-endpoint = <&video_source1_out>; - }; - }; - - port@2 { - reg = <2>; - - mux_out: endpoint { - remote-endpoint = <&capture_interface_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml new file mode 100644 index 000000000000..2f28a7dad93f --- /dev/null +++ b/Documentation/devicetree/bindings/media/video-mux.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/video-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Video Multiplexer + +maintainers: + - Sakari Ailus <sakari.ailus@linux.intel.com> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: + Video multiplexers allow to select between multiple input ports. Video + received on the active input port is passed through to the output port. Muxes + described by this binding are controlled by a multiplexer controller. + +properties: + compatible: + const: video-mux + + mux-controls: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + '^port@': + $ref: /schemas/graph.yaml#/properties/port + + required: + - port@0 + - port@1 + - port@2 + +patternProperties: + '^port@': + $ref: /schemas/graph.yaml#/properties/port + description: + At least three port nodes containing endpoints connecting to the source + and sink devices according to of_graph bindings. The last port is the + output port, all others are inputs. + +required: + - compatible + - mux-controls + +oneOf: + - required: + - ports + - required: + - port@0 + - port@1 + - port@2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + video-mux { + compatible = "video-mux"; + mux-controls = <&mux>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mux_in0: endpoint { + remote-endpoint = <&video_source0_out>; + }; + }; + + port@1 { + reg = <1>; + + mux_in1: endpoint { + remote-endpoint = <&video_source1_out>; + }; + }; + + port@2 { + reg = <2>; + + mux_out: endpoint { + remote-endpoint = <&capture_interface_in>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/zx-irdec.txt b/Documentation/devicetree/bindings/media/zx-irdec.txt deleted file mode 100644 index 295b9fab593e..000000000000 --- a/Documentation/devicetree/bindings/media/zx-irdec.txt +++ /dev/null @@ -1,14 +0,0 @@ -IR Decoder (IRDEC) on ZTE ZX family SoCs - -Required properties: - - compatible: Should be "zte,zx296718-irdec". - - reg: Physical base address and length of IRDEC registers. - - interrupts: Interrupt number of IRDEC. - -Exmaples: - - irdec: ir-decoder@111000 { - compatible = "zte,zx296718-irdec"; - reg = <0x111000 0x1000>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml index 09bde65e1955..9163c3f12a85 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml @@ -37,9 +37,10 @@ properties: description: phandle of the memory controller node - core-supply: + power-domains: + maxItems: 1 description: - Phandle of voltage regulator of the SoC "core" power domain. + Phandle of the SoC "core" power domain. operating-points-v2: description: @@ -370,7 +371,7 @@ examples: nvidia,memory-controller = <&mc>; operating-points-v2 = <&dvfs_opp_table>; - core-supply = <&vdd_core>; + power-domains = <&domain>; #interconnect-cells = <0>; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt index cc443fcf4bec..d2250498c36d 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt @@ -23,7 +23,7 @@ For each opp entry in 'operating-points-v2' table: matches, the OPP gets enabled. Optional properties: -- core-supply: Phandle of voltage regulator of the SoC "core" power domain. +- power-domains: Phandle of the SoC "core" power domain. Child device nodes describe the memory settings for different configurations and clock rates. @@ -48,7 +48,7 @@ Example: interrupts = <0 78 0x04>; clocks = <&tegra_car TEGRA20_CLK_EMC>; nvidia,memory-controller = <&mc>; - core-supply = <&core_vdd_reg>; + power-domains = <&domain>; operating-points-v2 = <&opp_table>; } diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt deleted file mode 100644 index 739b7c6f2e26..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt +++ /dev/null @@ -1,40 +0,0 @@ -NVIDIA Tegra20 MC(Memory Controller) - -Required properties: -- compatible : "nvidia,tegra20-mc-gart" -- reg : Should contain 2 register ranges: physical base address and length of - the controller's registers and the GART aperture respectively. -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - mc: the module's clock input -- interrupts : Should contain MC General interrupt. -- #reset-cells : Should be 1. This cell represents memory client module ID. - The assignments may be found in header file <dt-bindings/memory/tegra20-mc.h> - or in the TRM documentation. -- #iommu-cells: Should be 0. This cell represents the number of cells in an - IOMMU specifier needed to encode an address. GART supports only a single - address space that is shared by all devices, therefore no additional - information needed for the address encoding. -- #interconnect-cells : Should be 1. This cell represents memory client. - The assignments may be found in header file <dt-bindings/memory/tegra20-mc.h>. - -Example: - mc: memory-controller@7000f000 { - compatible = "nvidia,tegra20-mc-gart"; - reg = <0x7000f000 0x400 /* controller registers */ - 0x58000000 0x02000000>; /* GART aperture */ - clocks = <&tegra_car TEGRA20_CLK_MC>; - clock-names = "mc"; - interrupts = <GIC_SPI 77 0x04>; - #reset-cells = <1>; - #iommu-cells = <0>; - #interconnect-cells = <1>; - }; - - video-codec@6001a000 { - compatible = "nvidia,tegra20-vde"; - ... - resets = <&mc TEGRA20_MC_RESET_VDE>; - iommus = <&mc>; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml new file mode 100644 index 000000000000..55caf6905399 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra20-mc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 SoC Memory Controller + +maintainers: + - Dmitry Osipenko <digetx@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The Tegra20 Memory Controller merges request streams from various client + interfaces into request stream(s) for the various memory target devices, + and returns response data to the various clients. The Memory Controller + has a configurable arbitration algorithm to allow the user to fine-tune + performance among the various clients. + + Tegra20 Memory Controller includes the GART (Graphics Address Relocation + Table) which allows Memory Controller to provide a linear view of a + fragmented memory pages. + +properties: + compatible: + const: nvidia,tegra20-mc-gart + + reg: + items: + - description: controller registers + - description: GART registers + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mc + + interrupts: + maxItems: 1 + + "#reset-cells": + const: 1 + + "#iommu-cells": + const: 0 + + "#interconnect-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#reset-cells" + - "#iommu-cells" + - "#interconnect-cells" + +additionalProperties: false + +examples: + - | + memory-controller@7000f000 { + compatible = "nvidia,tegra20-mc-gart"; + reg = <0x7000f000 0x400>, /* Controller registers */ + <0x58000000 0x02000000>; /* GART aperture */ + clocks = <&clock_controller 32>; + clock-names = "mc"; + + interrupts = <0 77 4>; + + #iommu-cells = <0>; + #reset-cells = <1>; + #interconnect-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml index 49ab09252e52..bc8477e7ab19 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml @@ -34,7 +34,7 @@ properties: - description: EMC general interrupt memory-region: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: phandle to a reserved memory region describing the table of EMC frequencies trained by the firmware diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml index 0a2e2c0d0fdd..fb6af14cb49c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml @@ -39,9 +39,10 @@ properties: description: Phandle of the Memory Controller node. - core-supply: + power-domains: + maxItems: 1 description: - Phandle of voltage regulator of the SoC "core" power domain. + Phandle of the SoC "core" power domain. operating-points-v2: description: @@ -241,7 +242,7 @@ examples: nvidia,memory-controller = <&mc>; operating-points-v2 = <&dvfs_opp_table>; - core-supply = <&vdd_core>; + power-domains = <&domain>; #interconnect-cells = <0>; diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index d2a6e835c257..937b3e5505e0 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -72,7 +72,9 @@ Required child device properties: pwm|regulator|rtc|sysctrl|usb]"; A few child devices require ADC channels from the GPADC node. Those follow the - standard bindings from iio/iio-bindings.txt and iio/adc/adc.txt + standard bindings from + https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml + and Documentation/devicetree/bindings/iio/adc/adc.yaml abx500-temp : io-channels "aux1" and "aux2" for measuring external temperatures. diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml new file mode 100644 index 000000000000..dd43a0c766f3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi ATC260x Power Management IC bindings + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + +description: | + ATC260x series PMICs integrates Audio Codec, Power Management, RTC, IR + and GPIO controller blocks. Currently only the PM related functionalities + (i.e. regulators and system power-off/reboot) for the ATC2603C and ATC2609A + chip variants are supported. + ATC2603C includes 3 programmable DC-DC converters, 9 programmable LDO + regulators and 1 fixed LDO regulator. + ATC2609A includes 5 programmable DC-DC converters and 10 programmable LDO + regulators. + +allOf: + - $ref: ../input/input.yaml + +properties: + compatible: + enum: + - actions,atc2603c + - actions,atc2609a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-time-sec: + description: | + Duration in seconds which the key should be kept pressed for device + to reset automatically. The hardware default is 8. Use 0 to disable + this functionality. + enum: [0, 6, 8, 10, 12] + + regulators: + type: object + description: | + List of child nodes specifying the regulators, depending on chip variant: + * ATC2603C: dcdc[1-3], ldo[1-3,5-8,11,12], switchldo1 + * ATC2609A: dcdc[0-4], ldo[0-9] + + properties: + compatible: + enum: + - actions,atc2603c-regulator + - actions,atc2609a-regulator + + switchldo1: + type: object + $ref: ../regulator/regulator.yaml + + properties: + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-allow-bypass: true + regulator-active-discharge: true + + additionalProperties: false + + patternProperties: + "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2]|switchldo1)-supply$": + description: ATC260x voltage regulators supplies + + "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$": + type: object + $ref: ../regulator/regulator.yaml + + properties: + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-allow-bypass: true + + additionalProperties: false + + allOf: + - if: + properties: + compatible: + contains: + const: actions,atc2603c-regulator + then: + patternProperties: + "^(dcdc[0,4]|ldo[0,4,9])(-supply)?$": false + + "^(ldo|dcdc)": + properties: + regulator-allow-bypass: false + - if: + properties: + compatible: + contains: + const: actions,atc2609a-regulator + then: + patternProperties: + "^(ldo1[1-2]|switchldo1)(-supply)?$": false + + "^(dcdc|ldo[3-9])": + properties: + regulator-allow-bypass: false + + required: + - compatible + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@65 { + compatible = "actions,atc2603c"; + reg = <0x65>; + interrupt-parent = <&sirq>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + + reset-time-sec = <6>; + + regulators { + compatible = "actions,atc2603c-regulator"; + + dcdc1-supply = <®_5v0>; + dcdc3-supply = <®_5v0>; + ldo5-supply = <®_5v0>; + switchldo1-supply = <&vcc>; + + vdd_cpu: dcdc1 { + regulator-name = "VDD_CPU"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + vcc: dcdc3 { + regulator-name = "VCC"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_3v1: ldo5 { + regulator-name = "VCC_3V1"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + + sd_vcc: switchldo1 { + regulator-name = "SD_VCC"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt index d0a38ba8b9ce..936aa108eab4 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt @@ -9,13 +9,7 @@ primary use case of the Aspeed LPC controller is as a slave on the bus conditions it can also take the role of bus master. The LPC controller is represented as a multi-function device to account for the -mix of functionality it provides. The principle split is between the register -layout at the start of the I/O space which is, to quote the Aspeed datasheet, -"basically compatible with the [LPC registers from the] popular BMC controller -H8S/2168[1]", and everything else, where everything else is an eclectic -collection of functions with a esoteric register layout. "Everything else", -here labeled the "host" portion of the controller, includes, but is not limited -to: +mix of functionality, which includes, but is not limited to: * An IPMI Block Transfer[2] Controller @@ -44,80 +38,36 @@ Required properties =================== - compatible: One of: - "aspeed,ast2400-lpc", "simple-mfd" - "aspeed,ast2500-lpc", "simple-mfd" - "aspeed,ast2600-lpc", "simple-mfd" + "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon" + "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon" + "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon" - reg: contains the physical address and length values of the Aspeed LPC memory region. - #address-cells: <1> - #size-cells: <1> -- ranges: Maps 0 to the physical address and length of the LPC memory - region - -Required LPC Child nodes -======================== - -BMC Node --------- - -- compatible: One of: - "aspeed,ast2400-lpc-bmc" - "aspeed,ast2500-lpc-bmc" - "aspeed,ast2600-lpc-bmc" - -- reg: contains the physical address and length values of the - H8S/2168-compatible LPC controller memory region - -Host Node ---------- - -- compatible: One of: - "aspeed,ast2400-lpc-host", "simple-mfd", "syscon" - "aspeed,ast2500-lpc-host", "simple-mfd", "syscon" - "aspeed,ast2600-lpc-host", "simple-mfd", "syscon" - -- reg: contains the address and length values of the host-related - register space for the Aspeed LPC controller - -- #address-cells: <1> -- #size-cells: <1> -- ranges: Maps 0 to the address and length of the host-related LPC memory +- ranges: Maps 0 to the physical address and length of the LPC memory region Example: lpc: lpc@1e789000 { - compatible = "aspeed,ast2500-lpc", "simple-mfd"; + compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon"; reg = <0x1e789000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1e789000 0x1000>; - lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2500-lpc-bmc"; + lpc_snoop: lpc-snoop@0 { + compatible = "aspeed,ast2600-lpc-snoop"; reg = <0x0 0x80>; - }; - - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + snoop-ports = <0x80>; }; }; -BMC Node Children -================== - - -Host Node Children -================== LPC Host Interface Controller ------------------- @@ -149,14 +99,12 @@ Optional properties: Example: -lpc-host@80 { - lpc_ctrl: lpc-ctrl@0 { - compatible = "aspeed,ast2500-lpc-ctrl"; - reg = <0x0 0x80>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - memory-region = <&flash_memory>; - flash = <&spi>; - }; +lpc_ctrl: lpc-ctrl@80 { + compatible = "aspeed,ast2500-lpc-ctrl"; + reg = <0x80 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + memory-region = <&flash_memory>; + flash = <&spi>; }; LPC Host Controller @@ -179,9 +127,9 @@ Required properties: Example: -lhc: lhc@20 { +lhc: lhc@a0 { compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24 0x48 0x8>; + reg = <0xa0 0x24 0xc8 0x8>; }; LPC reset control @@ -192,16 +140,18 @@ state of the LPC bus. Some systems may chose to modify this configuration. Required properties: - - compatible: "aspeed,ast2600-lpc-reset" or - "aspeed,ast2500-lpc-reset" - "aspeed,ast2400-lpc-reset" + - compatible: One of: + "aspeed,ast2600-lpc-reset"; + "aspeed,ast2500-lpc-reset"; + "aspeed,ast2400-lpc-reset"; + - reg: offset and length of the IP in the LHC memory region - #reset-controller indicates the number of reset cells expected Example: -lpc_reset: reset-controller@18 { +lpc_reset: reset-controller@98 { compatible = "aspeed,ast2500-lpc-reset"; - reg = <0x18 0x4>; + reg = <0x98 0x4>; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml new file mode 100644 index 000000000000..afc569bc15cf --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6318 GPIO System Controller Device Tree Bindings + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6318 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6318-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6318-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6318-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 50>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@10 { + compatible = "brcm,bcm6318-pinctrl"; + reg = <0x18 0x10>, <0x54 0x18>; + + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { + function = "ephy0_spd_led"; + pins = "gpio0"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { + function = "ephy1_spd_led"; + pins = "gpio1"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { + function = "ephy2_spd_led"; + pins = "gpio2"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { + function = "ephy3_spd_led"; + pins = "gpio3"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led-pins { + function = "ephy0_act_led"; + pins = "gpio4"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led-pins { + function = "ephy1_act_led"; + pins = "gpio5"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led-pins { + function = "ephy2_act_led"; + pins = "gpio6"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led-pins { + function = "ephy3_act_led"; + pins = "gpio7"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led-pins { + function = "inet_act_led"; + pins = "gpio8"; + }; + + pinctrl_inet_fail_led: inet_fail_led-pins { + function = "inet_fail_led"; + pins = "gpio9"; + }; + + pinctrl_dsl_led: dsl_led-pins { + function = "dsl_led"; + pins = "gpio10"; + }; + + pinctrl_post_fail_led: post_fail_led-pins { + function = "post_fail_led"; + pins = "gpio11"; + }; + + pinctrl_wlan_wps_led: wlan_wps_led-pins { + function = "wlan_wps_led"; + pins = "gpio12"; + }; + + pinctrl_usb_pwron: usb_pwron-pins { + function = "usb_pwron"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio13"; + }; + + pinctrl_usb_active: usb_active-pins { + function = "usb_active"; + pins = "gpio40"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml new file mode 100644 index 000000000000..c7771c86d7c1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm63268-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM63268 GPIO System Controller Device Tree Bindings + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM63268 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm63268-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@100000c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm63268-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x100000c0 0x80>; + ranges = <0 0x100000c0 0x80>; + + gpio@0 { + compatible = "brcm,bcm63268-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 52>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@10 { + compatible = "brcm,bcm63268-pinctrl"; + reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio0"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio1"; + }; + }; + + pinctrl_hsspi_cs4: hsspi_cs4-pins { + function = "hsspi_cs4"; + pins = "gpio16"; + }; + + pinctrl_hsspi_cs5: hsspi_cs5-pins { + function = "hsspi_cs5"; + pins = "gpio17"; + }; + + pinctrl_hsspi_cs6: hsspi_cs6-pins { + function = "hsspi_cs6"; + pins = "gpio8"; + }; + + pinctrl_hsspi_cs7: hsspi_cs7-pins { + function = "hsspi_cs7"; + pins = "gpio9"; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio19"; + }; + }; + + pinctrl_vreq_clk: vreq_clk-pins { + function = "vreq_clk"; + pins = "gpio22"; + }; + + pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins { + function = "pcie_clkreq_b"; + pins = "gpio23"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio30"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio31"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + group = "nand_grp"; + }; + + pinctrl_gpio35_alt: gpio35_alt-pins { + function = "gpio35_alt"; + pin = "gpio35"; + }; + + pinctrl_dectpd: dectpd-pins { + function = "dectpd"; + group = "dectpd_grp"; + }; + + pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { + function = "vdsl_phy_override_0"; + group = "vdsl_phy_override_0_grp"; + }; + + pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { + function = "vdsl_phy_override_1"; + group = "vdsl_phy_override_1_grp"; + }; + + pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { + function = "vdsl_phy_override_2"; + group = "vdsl_phy_override_2_grp"; + }; + + pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { + function = "vdsl_phy_override_3"; + group = "vdsl_phy_override_3_grp"; + }; + + pinctrl_dsl_gpio8: dsl_gpio8-pins { + function = "dsl_gpio8"; + group = "dsl_gpio8"; + }; + + pinctrl_dsl_gpio9: dsl_gpio9-pins { + function = "dsl_gpio9"; + group = "dsl_gpio9"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml new file mode 100644 index 000000000000..33963c11ae62 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6328-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6328 GPIO System Controller Device Tree Bindings + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6328 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6328-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6328-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6328-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6328-pinctrl"; + reg = <0x18 0x10>; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led-pins { + function = "inet_act_led"; + pins = "gpio11"; + }; + + pinctrl_pcie_clkreq: pcie_clkreq-pins { + function = "pcie_clkreq"; + pins = "gpio16"; + }; + + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { + function = "led"; + pins = "gpio17"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { + function = "led"; + pins = "gpio18"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { + function = "led"; + pins = "gpio19"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { + function = "led"; + pins = "gpio20"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led-pins { + function = "ephy0_act_led"; + pins = "gpio25"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led-pins { + function = "ephy1_act_led"; + pins = "gpio26"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led-pins { + function = "ephy2_act_led"; + pins = "gpio27"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led-pins { + function = "ephy3_act_led"; + pins = "gpio28"; + }; + + pinctrl_hsspi_cs1: hsspi_cs1-pins { + function = "hsspi_cs1"; + pins = "hsspi_cs1"; + }; + + pinctrl_usb_port1_device: usb_port1_device-pins { + function = "usb_device_port"; + pins = "usb_port1"; + }; + + pinctrl_usb_port1_host: usb_port1_host-pins { + function = "usb_host_port"; + pins = "usb_port1"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml new file mode 100644 index 000000000000..3e44bea78b03 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6358-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6358 GPIO System Controller Device Tree Bindings + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6358 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6358-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@fffe0080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6358-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0xfffe0080 0x80>; + ranges = <0 0xfffe0080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6358-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 40>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6358-pinctrl"; + reg = <0x18 0x4>; + + pinctrl_ebi_cs: ebi_cs-pins { + function = "ebi_cs"; + groups = "ebi_cs_grp"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + groups = "uart1_grp"; + }; + + pinctrl_serial_led: serial_led-pins { + function = "serial_led"; + groups = "serial_led_grp"; + }; + + pinctrl_legacy_led: legacy_led-pins { + function = "legacy_led"; + groups = "legacy_led_grp"; + }; + + pinctrl_led: led-pins { + function = "led"; + groups = "led_grp"; + }; + + pinctrl_spi_cs_23: spi_cs-pins { + function = "spi_cs"; + groups = "spi_cs_grp"; + }; + + pinctrl_utopia: utopia-pins { + function = "utopia"; + groups = "utopia_grp"; + }; + + pinctrl_pwm_syn_clk: pwm_syn_clk-pins { + function = "pwm_syn_clk"; + groups = "pwm_syn_clk_grp"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + groups = "sys_irq_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml new file mode 100644 index 000000000000..48d14a5fe0d5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml @@ -0,0 +1,236 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6362-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6362 GPIO System Controller Device Tree Bindings + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6362 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6362-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6362-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6362-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 48>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6362-pinctrl"; + reg = <0x18 0x10>, <0x38 0x4>; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio0"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + pins = "gpio1"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio2"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio3"; + }; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio4"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio5"; + }; + + pinctrl_robosw_led0: robosw_led0-pins { + function = "robosw_led0"; + pins = "gpio6"; + }; + + pinctrl_robosw_led1: robosw_led1-pins { + function = "robosw_led1"; + pins = "gpio7"; + }; + + pinctrl_inet_led: inet_led-pins { + function = "inet_led"; + pins = "gpio8"; + }; + + pinctrl_spi_cs2: spi_cs2-pins { + function = "spi_cs2"; + pins = "gpio9"; + }; + + pinctrl_spi_cs3: spi_cs3-pins { + function = "spi_cs3"; + pins = "gpio10"; + }; + + pinctrl_ntr_pulse: ntr_pulse-pins { + function = "ntr_pulse"; + pins = "gpio11"; + }; + + pinctrl_uart1_scts: uart1_scts-pins { + function = "uart1_scts"; + pins = "gpio12"; + }; + + pinctrl_uart1_srts: uart1_srts-pins { + function = "uart1_srts"; + pins = "gpio13"; + }; + + pinctrl_uart1: uart1-pins { + pinctrl_uart1_sdin: uart1_sdin-pins { + function = "uart1_sdin"; + pins = "gpio14"; + }; + + pinctrl_uart1_sdout: uart1_sdout-pins { + function = "uart1_sdout"; + pins = "gpio15"; + }; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio16"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio17"; + }; + + pinctrl_adsl_spi_clk: adsl_spi_clk-pins { + function = "adsl_spi_clk"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_cs: adsl_spi_cs-pins { + function = "adsl_spi_cs"; + pins = "gpio19"; + }; + }; + + pinctrl_ephy0_led: ephy0_led-pins { + function = "ephy0_led"; + pins = "gpio20"; + }; + + pinctrl_ephy1_led: ephy1_led-pins { + function = "ephy1_led"; + pins = "gpio21"; + }; + + pinctrl_ephy2_led: ephy2_led-pins { + function = "ephy2_led"; + pins = "gpio22"; + }; + + pinctrl_ephy3_led: ephy3_led-pins { + function = "ephy3_led"; + pins = "gpio23"; + }; + + pinctrl_ext_irq0: ext_irq0-pins { + function = "ext_irq0"; + pins = "gpio24"; + }; + + pinctrl_ext_irq1: ext_irq1-pins { + function = "ext_irq1"; + pins = "gpio25"; + }; + + pinctrl_ext_irq2: ext_irq2-pins { + function = "ext_irq2"; + pins = "gpio26"; + }; + + pinctrl_ext_irq3: ext_irq3-pins { + function = "ext_irq3"; + pins = "gpio27"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + group = "nand_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml new file mode 100644 index 000000000000..307270b0cfed --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml @@ -0,0 +1,246 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6368 GPIO System Controller Device Tree Bindings + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6368 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6368-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6368-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6368-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 38>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6368-pinctrl"; + reg = <0x18 0x4>, <0x38 0x4>; + + pinctrl_analog_afe_0: analog_afe_0-pins { + function = "analog_afe_0"; + pins = "gpio0"; + }; + + pinctrl_analog_afe_1: analog_afe_1-pins { + function = "analog_afe_1"; + pins = "gpio1"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + pins = "gpio2"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio3"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio4"; + }; + }; + + pinctrl_inet_led: inet_led-pins { + function = "inet_led"; + pins = "gpio5"; + }; + + pinctrl_ephy0_led: ephy0_led-pins { + function = "ephy0_led"; + pins = "gpio6"; + }; + + pinctrl_ephy1_led: ephy1_led-pins { + function = "ephy1_led"; + pins = "gpio7"; + }; + + pinctrl_ephy2_led: ephy2_led-pins { + function = "ephy2_led"; + pins = "gpio8"; + }; + + pinctrl_ephy3_led: ephy3_led-pins { + function = "ephy3_led"; + pins = "gpio9"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio10"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio11"; + }; + + pinctrl_robosw_led0: robosw_led0-pins { + function = "robosw_led0"; + pins = "gpio12"; + }; + + pinctrl_robosw_led1: robosw_led1-pins { + function = "robosw_led1"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio14"; + }; + + pinctrl_pci: pci-pins { + pinctrl_pci_req1: pci_req1-pins { + function = "pci_req1"; + pins = "gpio16"; + }; + + pinctrl_pci_gnt1: pci_gnt1-pins { + function = "pci_gnt1"; + pins = "gpio17"; + }; + + pinctrl_pci_intb: pci_intb-pins { + function = "pci_intb"; + pins = "gpio18"; + }; + + pinctrl_pci_req0: pci_req0-pins { + function = "pci_req0"; + pins = "gpio19"; + }; + + pinctrl_pci_gnt0: pci_gnt0-pins { + function = "pci_gnt0"; + pins = "gpio20"; + }; + }; + + pinctrl_pcmcia: pcmcia-pins { + pinctrl_pcmcia_cd1: pcmcia_cd1-pins { + function = "pcmcia_cd1"; + pins = "gpio22"; + }; + + pinctrl_pcmcia_cd2: pcmcia_cd2-pins { + function = "pcmcia_cd2"; + pins = "gpio23"; + }; + + pinctrl_pcmcia_vs1: pcmcia_vs1-pins { + function = "pcmcia_vs1"; + pins = "gpio24"; + }; + + pinctrl_pcmcia_vs2: pcmcia_vs2-pins { + function = "pcmcia_vs2"; + pins = "gpio25"; + }; + }; + + pinctrl_ebi_cs2: ebi_cs2-pins { + function = "ebi_cs2"; + pins = "gpio26"; + }; + + pinctrl_ebi_cs3: ebi_cs3-pins { + function = "ebi_cs3"; + pins = "gpio27"; + }; + + pinctrl_spi_cs2: spi_cs2-pins { + function = "spi_cs2"; + pins = "gpio28"; + }; + + pinctrl_spi_cs3: spi_cs3-pins { + function = "spi_cs3"; + pins = "gpio29"; + }; + + pinctrl_spi_cs4: spi_cs4-pins { + function = "spi_cs4"; + pins = "gpio30"; + }; + + pinctrl_spi_cs5: spi_cs5-pins { + function = "spi_cs5"; + pins = "gpio31"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + group = "uart1_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index 76bf16ee27ec..4dfa70a013ae 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -94,6 +94,9 @@ properties: keyboard-controller: $ref: "/schemas/input/google,cros-ec-keyb.yaml#" + proximity: + $ref: "/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#" + codecs: type: object additionalProperties: false @@ -180,6 +183,10 @@ examples: interrupts = <99 0>; interrupt-parent = <&gpio7>; spi-max-frequency = <5000000>; + + proximity { + compatible = "google,cros-ec-mkbp-proximity"; + }; }; }; diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt index 5ddcc8f4febc..b52e7a33f0f9 100644 --- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt +++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt @@ -16,14 +16,14 @@ Optional subnodes: The sub-functions of CPCAP get their own node with their own compatible values, which are described in the following files: -- ../power/supply/cpcap-battery.txt -- ../power/supply/cpcap-charger.txt -- ../regulator/cpcap-regulator.txt -- ../phy/phy-cpcap-usb.txt -- ../input/cpcap-pwrbutton.txt -- ../rtc/cpcap-rtc.txt -- ../leds/leds-cpcap.txt -- ../iio/adc/cpcap-adc.txt +- Documentation/devicetree/bindings/power/supply/cpcap-battery.txt +- Documentation/devicetree/bindings/power/supply/cpcap-charger.txt +- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt +- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt +- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt +- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt +- Documentation/devicetree/bindings/leds/leds-cpcap.txt +- Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml The only exception is the audio codec. Instead of a compatible value its node must be named "audio-codec". diff --git a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml new file mode 100644 index 000000000000..59a630025f52 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/netronix,ntxec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Netronix Embedded Controller + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@gmx.net> + +description: | + This EC is found in e-book readers of multiple brands (e.g. Kobo, Tolino), and + is typically implemented as a TI MSP430 microcontroller. + +properties: + compatible: + const: netronix,ntxec + + reg: + items: + - description: The I2C address of the EC + + system-power-controller: + type: boolean + description: See Documentation/devicetree/bindings/power/power-controller.txt + + interrupts: + minItems: 1 + description: + The EC can signal interrupts via a GPIO line + + "#pwm-cells": + const: 2 + description: | + Number of cells in a PWM specifier. + + The following PWM channels are supported: + - 0: The PWM channel controlled by registers 0xa1-0xa7 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ec: embedded-controller@43 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ntxec>; + + compatible = "netronix,ntxec"; + reg = <0x43>; + system-power-controller; + interrupt-parent = <&gpio4>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + #pwm-cells = <2>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ec 0 50000>; + power-supply = <&backlight_regulator>; + }; + + backlight_regulator: regulator-dummy { + compatible = "regulator-fixed"; + regulator-name = "backlight"; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt deleted file mode 100644 index 9e5eba4a4f0d..000000000000 --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt +++ /dev/null @@ -1,99 +0,0 @@ -Qualcomm PM8xxx PMIC multi-function devices - -The PM8xxx family of Power Management ICs are used to provide regulated -voltages and other various functionality to Qualcomm SoCs. - -= PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8058" - "qcom,pm8821" - "qcom,pm8921" - -- #address-cells: - Usage: required - Value type: <u32> - Definition: must be 1 - -- #size-cells: - Usage: required - Value type: <u32> - Definition: must be 0 - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: specifies the interrupt that indicates a subdevice - has generated an interrupt (summary interrupt). The - format of the specifier is defined by the binding document - describing the node's interrupt parent. - -- #interrupt-cells: - Usage: required - Value type : <u32> - Definition: must be 2. Specifies the number of cells needed to encode - an interrupt source. The 1st cell contains the interrupt - number. The 2nd cell is the trigger type and level flags - encoded as follows: - - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - -- interrupt-controller: - Usage: required - Value type: <empty> - Definition: identifies this node as an interrupt controller - -= SUBCOMPONENTS - -The PMIC contains multiple independent functions, each described in a subnode. -The below bindings specify the set of valid subnodes. - -== Real-Time Clock - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8058-rtc" - "qcom,pm8921-rtc" - "qcom,pm8941-rtc" - "qcom,pm8018-rtc" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: single entry specifying the base address of the RTC registers - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: single entry specifying the RTC's alarm interrupt - -- allow-set-time: - Usage: optional - Value type: <empty> - Definition: indicates that the setting of RTC time is allowed by - the host CPU - -= EXAMPLE - - pmicintc: pmic@0 { - compatible = "qcom,pm8921"; - interrupts = <104 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - rtc@11d { - compatible = "qcom,pm8921-rtc"; - reg = <0x11d>; - interrupts = <0x27 0>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml new file mode 100644 index 000000000000..9065ec53e643 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8xxx PMIC multi-function devices + +maintainers: + - Satya Priya <skakit@codeaurora.org> + +description: | + The PM8xxx family of Power Management ICs are used to provide regulated + voltages and other various functionality to Qualcomm SoCs. + +properties: + compatible: + enum: + - qcom,pm8058 + - qcom,pm8821 + - qcom,pm8921 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + +patternProperties: + "rtc@[0-9a-f]+$": + type: object + $ref: "../rtc/qcom-pm8xxx-rtc.yaml" + +required: + - compatible + - '#address-cells' + - '#size-cells' + - interrupts + - '#interrupt-cells' + - interrupt-controller + +additionalProperties: false +... diff --git a/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml new file mode 100644 index 000000000000..032a7fb0b4a7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ricoh,rn5t618.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ricoh RN5T567/RN5T618/RC5T619 PMIC + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: | + Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which + integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators, + GPIOs, and a watchdog timer. It can be controlled through an I2C interface. + The RN5T618/RC5T619 provides additionally a Li-ion battery charger, + fuel gauge, and an ADC. + The RC5T619 additionally includes USB charger detection and an RTC. + +allOf: + - if: + properties: + compatible: + contains: + const: ricoh,rn5t567 + then: + properties: + regulators: + patternProperties: + "^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$": + $ref: ../regulator/regulator.yaml + additionalProperties: false + - if: + properties: + compatible: + contains: + const: ricoh,rn5t618 + then: + properties: + regulators: + patternProperties: + "^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$": + $ref: ../regulator/regulator.yaml + additionalProperties: false + - if: + properties: + compatible: + contains: + const: ricoh,rc5t619 + then: + properties: + regulators: + patternProperties: + "^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$": + $ref: ../regulator/regulator.yaml + additionalProperties: false + +properties: + compatible: + enum: + - ricoh,rn5t567 + - ricoh,rn5t618 + - ricoh,rc5t619 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + system-power-controller: + type: boolean + description: | + See Documentation/devicetree/bindings/power/power-controller.txt + + regulators: + type: object + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@32 { + compatible = "ricoh,rn5t618"; + reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + system-power-controller; + + regulators { + DCDC1 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + DCDC2 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt deleted file mode 100644 index 16778ea00dbc..000000000000 --- a/Documentation/devicetree/bindings/mfd/rn5t618.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Ricoh RN5T567/RN5T618 PMIC - -Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which -integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators, -GPIOs, and a watchdog timer. It can be controlled through an I2C interface. -The RN5T618/RC5T619 provides additionally a Li-ion battery charger, -fuel gauge, and an ADC. -The RC5T619 additionnally includes USB charger detection and an RTC. - -Required properties: - - compatible: must be one of - "ricoh,rn5t567" - "ricoh,rn5t618" - "ricoh,rc5t619" - - reg: the I2C slave address of the device - -Optional properties: - - interrupts: interrupt mapping for IRQ - See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - system-power-controller: - See Documentation/devicetree/bindings/power/power-controller.txt - -Sub-nodes: - - regulators: the node is required if the regulator functionality is - needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4 - (RN5T567/RC5T619), LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, LDO8, - LDO9, LDO10, LDORTC1 and LDORTC2. - LDO7-10 are specific to RC5T619. - The common bindings for each individual regulator can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - -Example: - - pmic@32 { - compatible = "ricoh,rn5t618"; - reg = <0x32>; - interrupt-parent = <&gpio5>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; - system-power-controller; - - regulators { - DCDC1 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - DCDC2 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml new file mode 100644 index 000000000000..fe265bcab50d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml @@ -0,0 +1,201 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71815 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + BD71815AGW is a single-chip power management ICs for battery-powered + portable devices. It integrates 5 buck converters, 8 LDOs, a boost driver + for LED and a 500 mA single-cell linear charger. Also included is a Coulomb + counter, a real-time clock (RTC), and a 32.768 kHz clock gate and two GPOs. + +properties: + compatible: + const: rohm,bd71815 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the pin number and the second cell is used to specify + flags. See ../gpio/gpio.txt for more information. + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + + clock-output-names: + const: bd71815-32k-out + + rohm,clkout-open-drain: + description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1 + + rohm,charger-sense-resistor-ohms: + minimum: 10000000 + maximum: 50000000 + description: | + BD71827 and BD71828 have SAR ADC for measuring charging currents. + External sense resistor (RSENSE in data sheet) should be used. If + something other but 30MOhm resistor is used the resistance value + should be given here in Ohms. + default: 30000000 + + regulators: + $ref: ../regulator/rohm,bd71815-regulator.yaml + description: + List of child nodes that specify the regulators. + + gpio-reserved-ranges: + description: | + Usage of BD71828 GPIO pins can be changed via OTP. This property can be + used to mark the pins which should not be configured for GPIO. Please see + the ../gpio/gpio.txt for more information. + + rohm,enable-hidden-gpo: + description: | + The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the + data-sheet as it's location in the middle of GND pins makes it hard to + use on PCB. If your board has managed to use this pin you can enable the + second GPO by defining this property. Dont enable this if you are unsure + about how the E5 pin is connected on your board. + type: boolean + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { + compatible = "rohm,bd71815"; + reg = <0x4b>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&osc 0>; + #clock-cells = <0>; + clock-output-names = "bd71815-32k-out"; + + gpio-controller; + #gpio-cells = <2>; + + rohm,charger-sense-resistor-ohms = <10000000>; + + regulators { + buck1: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1150000>; + rohm,dvs-suspend-voltage = <950000>; + }; + buck2: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1150000>; + rohm,dvs-suspend-voltage = <950000>; + }; + buck3: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + buck4: buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-always-on; + }; + buck5: buck5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo1: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo2: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo3: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo4: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo5: ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo6: ldodvref { + regulator-name = "ldodvref"; + regulator-always-on; + }; + ldo7: ldolpsr { + regulator-name = "ldolpsr"; + regulator-always-on; + }; + + boost: wled { + regulator-name = "wled"; + regulator-min-microamp = <10>; + regulator-max-microamp = <25000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml index 3a6a1a26e2b3..8380166d176c 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml @@ -44,6 +44,12 @@ properties: clock-output-names: const: bd71828-32k-out + rohm,clkout-open-drain: + description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1 + rohm,charger-sense-resistor-ohms: minimum: 10000000 maximum: 50000000 diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml new file mode 100644 index 000000000000..6483860da955 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd9576-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + BD9576MUF and BD9573MUF are power management ICs primarily intended for + powering the R-Car series processors. + The IC provides 6 power outputs with configurable sequencing and safety + monitoring. A watchdog logic with slow ping/windowed modes is also included. + +properties: + compatible: + enum: + - rohm,bd9576 + - rohm,bd9573 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + rohm,vout1-en-low: + description: + BD9576 and BD9573 VOUT1 regulator enable state can be individually + controlled by a GPIO. This is dictated by state of vout1-en pin during + the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1 + enable sate is controlled via this pin. Set this property if vout1-en + is wired to be down at PMIC start-up. + type: boolean + + rohm,vout1-en-gpios: + description: + GPIO specifier to specify the GPIO connected to vout1-en for vout1 ON/OFF + state control. + maxItems: 1 + + rohm,ddr-sel-low: + description: + The BD9576 and BD9573 output voltage for DDR can be selected by setting + the ddr-sel pin low or high. Set this property if ddr-sel is grounded. + type: boolean + + rohm,watchdog-enable-gpios: + description: The GPIO line used to enable the watchdog. + maxItems: 1 + + rohm,watchdog-ping-gpios: + description: The GPIO line used to ping the watchdog. + maxItems: 1 + + rohm,hw-timeout-ms: + maxItems: 2 + description: + Watchog timeout in milliseconds. If single value is given it is + the maximum timeout. Eg. if pinging watchdog is not done within this time + limit the watchdog will be triggered. If two values are given watchdog + is configured in "window mode". Then first value is limit for short-ping + Eg. if watchdog is pinged sooner than that the watchdog will trigger. + When two values is given the second value is the maximum timeout. + # (HW) minimum for short timeout is 2ms, maximum 220 ms. + # (HW) minimum for max timeout is 4ms, maximum 4416 ms. + + regulators: + $ref: ../regulator/rohm,bd9576-regulator.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@30 { + compatible = "rohm,bd9576"; + reg = <0x30>; + rohm,vout1-en-low; + rohm,vout1-en-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + rohm,ddr-sel-low; + rohm,watchdog-enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + rohm,watchdog-ping-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + rohm,hw-timeout-ms = <150>, <2300>; + + regulators { + boost1: regulator-vd50 { + regulator-name = "VD50"; + }; + buck1: regulator-vd18 { + regulator-name = "VD18"; + }; + buck2: regulator-vdddr { + regulator-name = "VDDDR"; + }; + buck3: regulator-vd10 { + regulator-name = "VD10"; + }; + ldo: regulator-voutl1 { + regulator-name = "VOUTL1"; + }; + sw: regulator-vouts1 { + regulator-name = "VOUTS1"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml index c4fc5345d38d..f6cac4b1079c 100644 --- a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml @@ -17,6 +17,10 @@ properties: description: I2C slave address const: 0x60 + reset-gpios: + description: GPIO connected to NRST pin (active low reset, pin 20) + maxItems: 1 + gpio-controller: true '#gpio-cells': diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml index a7e57c0913e1..dc5a29b5ef7d 100644 --- a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml @@ -17,6 +17,10 @@ properties: description: I2C slave address const: 0x60 + reset-gpios: + description: GPIO connected to NRST pin (active low reset, pin 20) + maxItems: 1 + gpio-controller: true '#gpio-cells': diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml index 1da6d6a958c9..48d4d53c25f9 100644 --- a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml @@ -19,6 +19,10 @@ properties: description: I2C slave address const: 0x60 + reset-gpios: + description: GPIO connected to NRST pin (active low reset, pin 20) + maxItems: 1 + gpio-controller: true '#gpio-cells': diff --git a/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml new file mode 100644 index 000000000000..6f569fbfa134 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/brcm,iproc-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom IPROC SDHCI controller + +maintainers: + - Ray Jui <ray.jui@broadcom.com> + - Scott Branden <scott.branden@broadcom.com> + - Nicolas Saenz Julienne <nsaenz@kernel.org> + +allOf: + - $ref: mmc-controller.yaml# + +properties: + compatible: + enum: + - brcm,bcm2835-sdhci + - brcm,bcm2711-emmc2 + - brcm,sdhci-iproc-cygnus + - brcm,sdhci-iproc + + reg: + minItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: + Handle to core clock for the sdhci controller. + + sdhci,auto-cmd12: + type: boolean + description: Specifies that controller should use auto CMD12 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/bcm-cygnus.h> + + mmc@18041000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x18041000 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>; + bus-width = <4>; + sdhci,auto-cmd12; + no-1-8-v; + }; +... diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt deleted file mode 100644 index 09d87cc1182a..000000000000 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt +++ /dev/null @@ -1,37 +0,0 @@ -Broadcom IPROC SDHCI controller - -This file documents differences between the core properties described -by mmc.txt and the properties that represent the IPROC SDHCI controller. - -Required properties: -- compatible : Should be one of the following - "brcm,bcm2835-sdhci" - "brcm,bcm2711-emmc2" - "brcm,sdhci-iproc-cygnus" - "brcm,sdhci-iproc" - -Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and -bcm2711-emmc2 for the additional eMMC2 controller on BCM2711. - -Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers -restricted to 32bit host accesses to SDHCI registers. - -Use sdhci-iproc for Broadcom SDHCI Controllers that allow standard -8, 16, 32-bit host access to SDHCI register. - -- clocks : The clock feeding the SDHCI controller. - -Optional properties: - - sdhci,auto-cmd12: specifies that controller should use auto CMD12. - -Example: - -sdhci0: sdhci@18041000 { - compatible = "brcm,sdhci-iproc-cygnus"; - reg = <0x18041000 0x100>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>; - bus-width = <4>; - sdhci,auto-cmd12; - no-1-8-v; -}; diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 802c9df23752..369471814496 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -103,6 +103,26 @@ properties: Only eMMC HS400 mode need to take care of this property. default: 0 + clocks: + maxItems: 3 + description: + Handle clocks for the sdhc controller. + + clock-names: + items: + - const: ipg + - const: ahb + - const: per + + pinctrl-names: + minItems: 1 + maxItems: 4 + items: + - const: default + - const: state_100mhz + - const: state_200mhz + - const: sleep + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt index 75486cca8054..5e74db69f581 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt @@ -5,11 +5,11 @@ by mmc.txt and the properties used by the mmc_spi driver. Required properties: - spi-max-frequency : maximum frequency for this device (Hz). -- voltage-ranges : two cells are required, first cell specifies minimum - slot voltage (mV), second cell specifies maximum slot voltage (mV). - Several ranges could be specified. Optional properties: +- voltage-ranges : two cells are required, first cell specifies minimum + slot voltage (mV), second cell specifies maximum slot voltage (mV). + Several ranges could be specified. If not provided, 3.2v..3.4v is assumed. - gpios : may specify GPIOs in this order: Card-Detect GPIO, Write-Protect GPIO. Note that this does not follow the binding from mmc.txt, for historical reasons. diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index 01630b0ecea7..8648d48dbbfd 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -31,6 +31,7 @@ properties: - const: mediatek,mt2701-mmc - items: - const: mediatek,mt8192-mmc + - const: mediatek,mt8195-mmc - const: mediatek,mt8183-mmc clocks: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt b/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt deleted file mode 100644 index ee4253b33be2..000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Synopsys DesignWare Cores Mobile Storage Host Controller - -Required properties: -- compatible: should be one of the following: - "snps,dwcmshc-sdhci" -- reg: offset and length of the register set for the device. -- interrupts: a single interrupt specifier. -- clocks: Array of clocks required for SDHCI; requires at least one for - core clock. -- clock-names: Array of names corresponding to clocks property; shall be - "core" for core clock and "bus" for optional bus clock. - -Example: - sdhci2: sdhci@aa0000 { - compatible = "snps,dwcmshc-sdhci"; - reg = <0xaa0000 0x1000>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&emmcclk>; - bus-width = <8>; - } diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml new file mode 100644 index 000000000000..e6c9a2f77cc7 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/snps,dwcmshc-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys Designware Mobile Storage Host Controller Binding + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + - Jisheng Zhang <Jisheng.Zhang@synaptics.com> + +allOf: + - $ref: mmc-controller.yaml# + +properties: + compatible: + enum: + - rockchip,rk3568-dwcmshc + - snps,dwcmshc-sdhci + + reg: + minItems: 1 + items: + - description: Offset and length of the register set for the device + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: core clock + - description: bus clock for optional + - description: axi clock for rockchip specified + - description: block clock for rockchip specified + - description: timer clock for rockchip specified + + + clock-names: + minItems: 1 + items: + - const: core + - const: bus + - const: axi + - const: block + - const: timer + + rockchip,txclk-tapnum: + description: Specify the number of delay for tx sampling. + $ref: /schemas/types.yaml#/definitions/uint8 + + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + mmc@fe310000 { + compatible = "rockchip,rk3568-dwcmshc"; + reg = <0xfe310000 0x10000>; + interrupts = <0 25 0x4>; + clocks = <&cru 17>, <&cru 18>, <&cru 19>, <&cru 20>, <&cru 21>; + clock-names = "core", "bus", "axi", "block", "timer"; + bus-width = <8>; + #address-cells = <1>; + #size-cells = <0>; + }; + - | + mmc@aa0000 { + compatible = "snps,dwcmshc-sdhci"; + reg = <0xaa000 0x1000>; + interrupts = <0 25 0x4>; + clocks = <&cru 17>, <&cru 18>; + clock-names = "core", "bus"; + bus-width = <8>; + #address-cells = <1>; + #size-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index d0e422f4b3e0..678b39952502 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -143,6 +143,13 @@ patternProperties: Ready/Busy pins. Active state refers to the NAND ready state and should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted. + secure-regions: + $ref: /schemas/types.yaml#/definitions/uint64-matrix + description: + Regions in the NAND chip which are protected using a secure element + like Trustzone. This property contains the start address and size of + the secure regions present. + required: - reg diff --git a/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml new file mode 100644 index 000000000000..99249cdfbfb3 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/linksys,ns-partitions.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Linksys Northstar partitioning + +description: | + Linksys devices based on Broadcom Northstar architecture often use two + firmware partitions. One is used for regular booting, the other is treated as + fallback. + + This binding allows defining all fixed partitions and marking those containing + firmware. System can use that information e.g. for booting or flashing + purposes. + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + compatible: + const: linksys,ns-partitions + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + +patternProperties: + "^partition@[0-9a-f]+$": + $ref: "partition.yaml#" + properties: + compatible: + items: + - const: linksys,ns-firmware + - const: brcm,trx + unevaluatedProperties: false + +required: + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + partitions { + compatible = "linksys,ns-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "nvram"; + reg = <0x100000 0x100000>; + }; + + partition@200000 { + compatible = "linksys,ns-firmware", "brcm,trx"; + reg = <0x200000 0xf00000>; + }; + + partition@1100000 { + compatible = "linksys,ns-firmware", "brcm,trx"; + reg = <0x1100000 0xf00000>; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml new file mode 100644 index 000000000000..5cdd2efa9132 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/nvmem-cells.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nvmem cells + +description: | + Any partition containing the compatible "nvmem-cells" will register as a + nvmem provider. + Each direct subnodes represents a nvmem cell following the nvmem binding. + Nvmem binding to declare nvmem-cells can be found in: + Documentation/devicetree/bindings/nvmem/nvmem.yaml + +maintainers: + - Ansuel Smith <ansuelsmth@gmail.com> + +allOf: + - $ref: /schemas/nvmem/nvmem.yaml# + +properties: + compatible: + const: nvmem-cells + +required: + - compatible + +additionalProperties: true + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* ... */ + + }; + art: art@1200000 { + compatible = "nvmem-cells"; + reg = <0x1200000 0x0140000>; + label = "art"; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_gmac1: macaddr_gmac1@0 { + reg = <0x0 0x6>; + }; + + macaddr_gmac2: macaddr_gmac2@6 { + reg = <0x6 0x6>; + }; + + pre_cal_24g: pre_cal_24g@1000 { + reg = <0x1000 0x2f20>; + }; + + pre_cal_5g: pre_cal_5g@5000{ + reg = <0x5000 0x2f20>; + }; + }; + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x000000 0x100000>; + read-only; + }; + + firmware@100000 { + compatible = "brcm,trx"; + label = "firmware"; + reg = <0x100000 0xe00000>; + }; + + calibration@f00000 { + compatible = "nvmem-cells"; + label = "calibration"; + reg = <0xf00000 0x100000>; + ranges = <0 0xf00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + + wifi0@0 { + reg = <0x000000 0x080000>; + }; + + wifi1@80000 { + reg = <0x080000 0x080000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml new file mode 100644 index 000000000000..84ad7ff30121 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/qcom,nandc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm NAND controller + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + compatible: + enum: + - qcom,ipq806x-nand + - qcom,ipq4019-nand + - qcom,ipq6018-nand + - qcom,ipq8074-nand + - qcom,sdx55-nand + + reg: + maxItems: 1 + + clocks: + items: + - description: Core Clock + - description: Always ON Clock + + clock-names: + items: + - const: core + - const: aon + + "#address-cells": true + "#size-cells": true + +patternProperties: + "^nand@[a-f0-9]$": + type: object + properties: + nand-bus-width: + const: 8 + + nand-ecc-strength: + enum: [1, 4, 8] + + nand-ecc-step-size: + enum: + - 512 + +allOf: + - $ref: "nand-controller.yaml#" + + - if: + properties: + compatible: + contains: + const: qcom,ipq806x-nand + then: + properties: + dmas: + items: + - description: rxtx DMA channel + + dma-names: + items: + - const: rxtx + + qcom,cmd-crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Must contain the ADM command type CRCI block instance number + specified for the NAND controller on the given platform + + qcom,data-crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Must contain the ADM data type CRCI block instance number + specified for the NAND controller on the given platform + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-nand + - qcom,ipq6018-nand + - qcom,ipq8074-nand + - qcom,sdx55-nand + + then: + properties: + dmas: + items: + - description: tx DMA channel + - description: rx DMA channel + - description: cmd DMA channel + + dma-names: + items: + - const: tx + - const: rx + - const: cmd + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-ipq806x.h> + nand-controller@1ac00000 { + compatible = "qcom,ipq806x-nand"; + reg = <0x1ac00000 0x800>; + + clocks = <&gcc EBI2_CLK>, + <&gcc EBI2_AON_CLK>; + clock-names = "core", "aon"; + + dmas = <&adm_dma 3>; + dma-names = "rxtx"; + qcom,cmd-crci = <15>; + qcom,data-crci = <3>; + + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot-nand"; + reg = <0 0x58a0000>; + }; + + partition@58a0000 { + label = "fs-nand"; + reg = <0x58a0000 0x4000000>; + }; + }; + }; + }; + + #include <dt-bindings/clock/qcom,gcc-ipq4019.h> + nand-controller@79b0000 { + compatible = "qcom,ipq4019-nand"; + reg = <0x79b0000 0x1000>; + + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "core", "aon"; + + dmas = <&qpicbam 0>, + <&qpicbam 1>, + <&qpicbam 2>; + dma-names = "tx", "rx", "cmd"; + + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + nand-ecc-strength = <4>; + nand-bus-width = <8>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot-nand"; + reg = <0 0x58a0000>; + }; + + partition@58a0000 { + label = "fs-nand"; + reg = <0x58a0000 0x4000000>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt deleted file mode 100644 index 5647913d8837..000000000000 --- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt +++ /dev/null @@ -1,142 +0,0 @@ -* Qualcomm NAND controller - -Required properties: -- compatible: must be one of the following: - * "qcom,ipq806x-nand" - for EBI2 NAND controller being used in IPQ806x - SoC and it uses ADM DMA - * "qcom,ipq4019-nand" - for QPIC NAND controller v1.4.0 being used in - IPQ4019 SoC and it uses BAM DMA - * "qcom,ipq6018-nand" - for QPIC NAND controller v1.5.0 being used in - IPQ6018 SoC and it uses BAM DMA - * "qcom,ipq8074-nand" - for QPIC NAND controller v1.5.0 being used in - IPQ8074 SoC and it uses BAM DMA - * "qcom,sdx55-nand" - for QPIC NAND controller v2.0.0 being used in - SDX55 SoC and it uses BAM DMA - -- reg: MMIO address range -- clocks: must contain core clock and always on clock -- clock-names: must contain "core" for the core clock and "aon" for the - always on clock - -EBI2 specific properties: -- dmas: DMA specifier, consisting of a phandle to the ADM DMA - controller node and the channel number to be used for - NAND. Refer to dma.txt and qcom_adm.txt for more details -- dma-names: must be "rxtx" -- qcom,cmd-crci: must contain the ADM command type CRCI block instance - number specified for the NAND controller on the given - platform -- qcom,data-crci: must contain the ADM data type CRCI block instance - number specified for the NAND controller on the given - platform - -QPIC specific properties: -- dmas: DMA specifier, consisting of a phandle to the BAM DMA - and the channel number to be used for NAND. Refer to - dma.txt, qcom_bam_dma.txt for more details -- dma-names: must contain all 3 channel names : "tx", "rx", "cmd" -- #address-cells: <1> - subnodes give the chip-select number -- #size-cells: <0> - -* NAND chip-select - -Each controller may contain one or more subnodes to represent enabled -chip-selects which (may) contain NAND flash chips. Their properties are as -follows. - -Required properties: -- reg: a single integer representing the chip-select - number (e.g., 0, 1, 2, etc.) -- #address-cells: see partition.txt -- #size-cells: see partition.txt - -Optional properties: -- nand-bus-width: see nand-controller.yaml -- nand-ecc-strength: see nand-controller.yaml. If not specified, then ECC strength will - be used according to chip requirement and available - OOB size. - -Each nandcs device node may optionally contain a 'partitions' sub-node, which -further contains sub-nodes describing the flash partition mapping. See -partition.txt for more detail. - -Example: - -nand-controller@1ac00000 { - compatible = "qcom,ipq806x-nand"; - reg = <0x1ac00000 0x800>; - - clocks = <&gcc EBI2_CLK>, - <&gcc EBI2_AON_CLK>; - clock-names = "core", "aon"; - - dmas = <&adm_dma 3>; - dma-names = "rxtx"; - qcom,cmd-crci = <15>; - qcom,data-crci = <3>; - - #address-cells = <1>; - #size-cells = <0>; - - nand@0 { - reg = <0>; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "boot-nand"; - reg = <0 0x58a0000>; - }; - - partition@58a0000 { - label = "fs-nand"; - reg = <0x58a0000 0x4000000>; - }; - }; - }; -}; - -nand-controller@79b0000 { - compatible = "qcom,ipq4019-nand"; - reg = <0x79b0000 0x1000>; - - clocks = <&gcc GCC_QPIC_CLK>, - <&gcc GCC_QPIC_AHB_CLK>; - clock-names = "core", "aon"; - - dmas = <&qpicbam 0>, - <&qpicbam 1>, - <&qpicbam 2>; - dma-names = "tx", "rx", "cmd"; - - #address-cells = <1>; - #size-cells = <0>; - - nand@0 { - reg = <0>; - nand-ecc-strength = <4>; - nand-bus-width = <8>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "boot-nand"; - reg = <0 0x58a0000>; - }; - - partition@58a0000 { - label = "fs-nand"; - reg = <0x58a0000 0x4000000>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mtd/tango-nand.txt b/Documentation/devicetree/bindings/mtd/tango-nand.txt deleted file mode 100644 index 91c8420241af..000000000000 --- a/Documentation/devicetree/bindings/mtd/tango-nand.txt +++ /dev/null @@ -1,38 +0,0 @@ -Sigma Designs Tango4 NAND Flash Controller (NFC) - -Required properties: - -- compatible: "sigma,smp8758-nand" -- reg: address/size of nfc_reg, nfc_mem, and pbus_reg -- dmas: reference to the DMA channel used by the controller -- dma-names: "rxtx" -- clocks: reference to the system clock -- #address-cells: <1> -- #size-cells: <0> - -Children nodes represent the available NAND chips. -See Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings. - -Example: - - nandc: nand-controller@2c000 { - compatible = "sigma,smp8758-nand"; - reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>; - dmas = <&dma0 3>; - dma-names = "rxtx"; - clocks = <&clkgen SYS_CLK>; - #address-cells = <1>; - #size-cells = <0>; - - nand@0 { - reg = <0>; /* CS0 */ - nand-ecc-strength = <14>; - nand-ecc-step-size = <1024>; - }; - - nand@1 { - reg = <1>; /* CS1 */ - nand-ecc-strength = <14>; - nand-ecc-step-size = <1024>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/actions,owl-emac.yaml b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml new file mode 100644 index 000000000000..1626e0a821b0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/actions,owl-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi Owl SoCs Ethernet MAC Controller + +maintainers: + - Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + +description: | + This Ethernet MAC is used on the Owl family of SoCs from Actions Semi. + It provides the RMII and SMII interfaces and is compliant with the + IEEE 802.3 CSMA/CD standard, supporting both half-duplex and full-duplex + operation modes at 10/100 Mb/s data transfer rates. + +allOf: + - $ref: "ethernet-controller.yaml#" + +properties: + compatible: + oneOf: + - const: actions,owl-emac + - items: + - enum: + - actions,s500-emac + - const: actions,owl-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + additionalItems: false + items: + - const: eth + - const: rmii + + resets: + maxItems: 1 + + actions,ethcfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the device containing custom config. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - phy-mode + - phy-handle + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/actions,s500-cmu.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/actions,s500-reset.h> + + ethernet@b0310000 { + compatible = "actions,s500-emac", "actions,owl-emac"; + reg = <0xb0310000 0x10000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu 59 /*CLK_ETHERNET*/>, <&cmu CLK_RMII_REF>; + clock-names = "eth", "rmii"; + resets = <&cmu RESET_ETHERNET>; + phy-mode = "rmii"; + phy-handle = <ð_phy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: ethernet-phy@3 { + reg = <0x3>; + interrupt-parent = <&sirq>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml index 79c38ea14237..2f46e45dcd60 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml +++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml @@ -22,17 +22,25 @@ properties: maxItems: 1 interrupts: - description: RX interrupt + minItems: 1 + maxItems: 2 + items: + - description: RX interrupt + - description: TX interrupt interrupt-names: - const: rx + minItems: 1 + maxItems: 2 + items: + - const: rx + - const: tx required: - reg - interrupts - interrupt-names -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -43,6 +51,7 @@ examples: compatible = "brcm,bcm4908-enet"; reg = <0x80002000 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "rx"; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; }; diff --git a/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml new file mode 100644 index 000000000000..2f34fda55fd0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,bcm6368-mdio-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6368 MDIO bus multiplexer + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + +description: + This MDIO bus multiplexer defines buses that could be internal as well as + external to SoCs. When child bus is selected, one needs to select these two + properties as well to generate desired MDIO transaction on appropriate bus. + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + const: brcm,bcm6368-mdio-mux + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +patternProperties: + '^mdio@[0-1]$': + type: object + properties: + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + required: + - reg + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + mdio0: mdio@10e000b0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6368-mdio-mux"; + reg = <0x10e000b0 0x6>; + + mdio_int: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + mdio_ext: mdio@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt deleted file mode 100644 index a7d57ba5f2ac..000000000000 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +++ /dev/null @@ -1,56 +0,0 @@ -Broadcom Bluetooth Chips ---------------------- - -This documents the binding structure and common properties for serial -attached Broadcom devices. - -Serial attached Broadcom devices shall be a child node of the host UART -device the slave device is attached to. - -Required properties: - - - compatible: should contain one of the following: - * "brcm,bcm20702a1" - * "brcm,bcm4329-bt" - * "brcm,bcm4330-bt" - * "brcm,bcm43438-bt" - * "brcm,bcm4345c5" - * "brcm,bcm43540-bt" - * "brcm,bcm4335a0" - -Optional properties: - - - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - - shutdown-gpios: GPIO specifier, used to enable the BT module - - device-wakeup-gpios: GPIO specifier, used to wakeup the controller - - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor. - deprecated, replaced by interrupts and - "host-wakeup" interrupt-names - - clocks: 1 or 2 clocks as defined in clock-names below, in that order - - clock-names: names for clock inputs, matching the clocks given - - "extclk": deprecated, replaced by "txco" - - "txco": external reference clock (not a standalone crystal) - - "lpo": external low power 32.768 kHz clock - - vbat-supply: phandle to regulator supply for VBAT - - vddio-supply: phandle to regulator supply for VDDIO - - brcm,bt-pcm-int-params: configure PCM parameters via a 5-byte array - - sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S - - pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps - - pcm-frame-type: short, long - - pcm-sync-mode: slave, master - - pcm-clock-mode: slave, master - - interrupts: must be one, used to wakeup the host processor - - interrupt-names: must be "host-wakeup" - -Example: - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <921600>; - brcm,bt-pcm-int-params = [01 02 00 01 01]; - }; -}; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml new file mode 100644 index 000000000000..fbdc2083bec4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/broadcom-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Bluetooth Chips + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + This binding describes Broadcom UART-attached bluetooth chips. + +properties: + compatible: + enum: + - brcm,bcm20702a1 + - brcm,bcm4329-bt + - brcm,bcm4330-bt + - brcm,bcm4334-bt + - brcm,bcm43438-bt + - brcm,bcm4345c5 + - brcm,bcm43540-bt + - brcm,bcm4335a0 + + shutdown-gpios: + maxItems: 1 + description: GPIO specifier for the line BT_REG_ON used to + power on the BT module + + reset-gpios: + maxItems: 1 + description: GPIO specifier for the line BT_RST_N used to + reset the BT module. This should be marked as + GPIO_ACTIVE_LOW. + + device-wakeup-gpios: + maxItems: 1 + description: GPIO specifier for the line BT_WAKE used to + wakeup the controller. This is using the BT_GPIO_0 + pin on the chip when in use. + + host-wakeup-gpios: + maxItems: 1 + deprecated: true + description: GPIO specifier for the line HOST_WAKE used + to wakeup the host processor. This is using he BT_GPIO_1 + pin on the chip when in use. This is deprecated and replaced + by interrupts and "host-wakeup" interrupt-names + + clocks: + maxItems: 2 + description: 1 or 2 clocks as defined in clock-names below, + in that order + + clock-names: + description: Names of the 1 to 2 supplied clocks + items: + - const: txco + - const: lpo + - const: extclk + + vbat-supply: + description: phandle to regulator supply for VBAT + + vddio-supply: + description: phandle to regulator supply for VDDIO + + brcm,bt-pcm-int-params: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 5 + maxItems: 5 + description: |- + configure PCM parameters via a 5-byte array: + sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S + pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps + pcm-frame-type: short, long + pcm-sync-mode: slave, master + pcm-clock-mode: slave, master + + interrupts: + items: + - description: Handle to the line HOST_WAKE used to wake + up the host processor. This uses the BT_GPIO_1 pin on + the chip when in use. + + interrupt-names: + items: + - const: host-wakeup + + max-speed: true + current-speed: true + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + uart { + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + max-speed = <921600>; + brcm,bt-pcm-int-params = [01 02 00 01 01]; + shutdown-gpios = <&gpio 30 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml index fe6a949a2eab..55bff1586b6f 100644 --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -57,7 +57,6 @@ properties: - const: per clock-frequency: - $ref: /schemas/types.yaml#/definitions/uint32 description: | The oscillator frequency driving the flexcan device, filled in by the boot loader. This property should only be used the used operating system diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index 6a5956347816..90ac4fef23f5 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -19,7 +19,8 @@ Required properties: "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC. "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC. "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. - "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. + "renesas,can-r8a7796" if CAN controller is a part of R8A77960 SoC. + "renesas,can-r8a77961" if CAN controller is a part of R8A77961 SoC. "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC. "renesas,can-r8a77990" if CAN controller is a part of R8A77990 SoC. "renesas,can-r8a77995" if CAN controller is a part of R8A77995 SoC. @@ -40,7 +41,7 @@ Required properties: - pinctrl-names: must be "default". Required properties for R8A774A1, R8A774B1, R8A774C0, R8A774E1, R8A7795, -R8A7796, R8A77965, R8A77990, and R8A77995: +R8A77960, R8A77961, R8A77965, R8A77990, and R8A77995: For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can be used by both CAN and CAN FD controller at the same time. It needs to be scaled to maximum frequency if any of these controllers use it. This is done diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 8a3494db4d8d..16aa192c118e 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -70,6 +70,15 @@ patternProperties: device is what the switch port is connected to $ref: /schemas/types.yaml#/definitions/phandle + dsa-tag-protocol: + description: + Instead of the default, the switch will use this tag protocol if + possible. Useful when a device supports multiple protcols and + the default is incompatible with the Ethernet device. + enum: + - dsa + - edsa + phy-handle: true phy-mode: true diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt index 886cbe8ffb38..e3829d3e480e 100644 --- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt +++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt @@ -5,6 +5,10 @@ Required properties for GSWIP core: - compatible : "lantiq,xrx200-gswip" for the embedded GSWIP in the xRX200 SoC + "lantiq,xrx300-gswip" for the embedded GSWIP in the + xRX300 SoC + "lantiq,xrx330-gswip" for the embedded GSWIP in the + xRX330 SoC - reg : memory range of the GSWIP core registers : memory range of the GSWIP MDIO registers : memory range of the GSWIP MII registers diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index 9f7d131bbcef..84985f53bffd 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -21,6 +21,8 @@ properties: - microchip,ksz8765 - microchip,ksz8794 - microchip,ksz8795 + - microchip,ksz8863 + - microchip,ksz8873 - microchip,ksz9477 - microchip,ksz9897 - microchip,ksz9896 diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 4b7d1e5d003c..e8f04687a3e0 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -49,7 +49,7 @@ properties: description: Reference to an nvmem node for the MAC address - nvmem-cells-names: + nvmem-cell-names: const: mac-address phy-connection-type: diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt index b7034ccbc1bd..9b9a3f197e2d 100644 --- a/Documentation/devicetree/bindings/net/fsl-enetc.txt +++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt @@ -102,3 +102,18 @@ Example: full-duplex; }; }; + +* Integrated Endpoint Register Block bindings + +Optionally, the fsl_enetc driver can probe on the Integrated Endpoint Register +Block, which preconfigures the FIFO limits for the ENETC ports. This is a node +with the following properties: + +- reg : Specifies the address in the SoC memory space. +- compatible : Must be "fsl,ls1028a-enetc-ierb". + +Example: + ierb@1f0800000 { + compatible = "fsl,ls1028a-enetc-ierb"; + reg = <0x01 0xf0800000 0x0 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml b/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml new file mode 100644 index 000000000000..11ffc306dd54 --- /dev/null +++ b/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/idt,3243x-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IDT 79rc3243x Ethernet controller + +description: Ethernet controller integrated into IDT 79RC3243x family SoCs + +maintainers: + - Thomas Bogendoerfer <tsbogend@alpha.franken.de> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: idt,3243x-emac + + reg: + maxItems: 3 + + reg-names: + items: + - const: emac + - const: dma_rx + - const: dma_tx + + interrupts: + items: + - description: RX interrupt + - description: TX interrupt + + interrupt-names: + items: + - const: rx + - const: tx + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mdioclk + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + + ethernet@60000 { + compatible = "idt,3243x-emac"; + + reg = <0x60000 0x10000>, + <0x40000 0x14>, + <0x40014 0x14>; + reg-names = "emac", "dma_rx", "dma_tx"; + + interrupt-parent = <&rcpic3>; + interrupts = <0>, <1>; + interrupt-names = "rx", "tx"; + + clocks = <&iclk>; + clock-names = "mdioclk"; + }; diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml new file mode 100644 index 000000000000..f2e91d1bf7d7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel IXP4xx ethernet + +allOf: + - $ref: "ethernet-controller.yaml#" + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Intel IXP4xx ethernet makes use of the IXP4xx NPE (Network + Processing Engine) and the IXP4xx Queue Manager to process + the ethernet frames. It can optionally contain an MDIO bus to + talk to PHYs. + +properties: + compatible: + const: intel,ixp4xx-ethernet + + reg: + maxItems: 1 + description: Ethernet MMIO address range + + queue-rx: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + maxItems: 1 + description: phandle to the RX queue on the NPE + + queue-txready: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + maxItems: 1 + description: phandle to the TX READY queue on the NPE + + phy-mode: true + + phy-handle: true + + intel,npe-handle: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + maxItems: 1 + description: phandle to the NPE this ethernet instance is using + and the instance to use in the second cell + + mdio: + type: object + $ref: "mdio.yaml#" + description: optional node for embedded MDIO controller + +required: + - compatible + - reg + - queue-rx + - queue-txready + - intel,npe-handle + +additionalProperties: false + +examples: + - | + npe: npe@c8006000 { + compatible = "intel,ixp4xx-network-processing-engine"; + reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; + }; + + ethernet@c8009000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc8009000 0x1000>; + status = "disabled"; + queue-rx = <&qmgr 4>; + queue-txready = <&qmgr 21>; + intel,npe-handle = <&npe 1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + + ethernet@c800c000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800c000 0x1000>; + status = "disabled"; + queue-rx = <&qmgr 3>; + queue-txready = <&qmgr 20>; + intel,npe-handle = <&npe 2>; + phy-mode = "rgmii"; + phy-handle = <&phy2>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + reg = <1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt index 8dbcf8295c6c..4d91a36c5cf5 100644 --- a/Documentation/devicetree/bindings/net/mdio-gpio.txt +++ b/Documentation/devicetree/bindings/net/mdio-gpio.txt @@ -2,6 +2,7 @@ MDIO on GPIOs Currently defined compatibles: - virtual,gpio-mdio +- microchip,mdio-smi0 MDC and MDIO lines connected to GPIO controllers are listed in the gpios property as described in section VIII.1 in the following order: diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt index b921731cd970..df9e844dd6bc 100644 --- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt @@ -65,6 +65,71 @@ KSZ9031: step is 60ps. The default value is the neutral setting, so setting rxc-skew-ps=<0> actually results in -900 picoseconds adjustment. + The KSZ9031 hardware supports a range of skew values from negative to + positive, where the specific range is property dependent. All values + specified in the devicetree are offset by the minimum value so they + can be represented as positive integers in the devicetree since it's + difficult to represent a negative number in the devictree. + + The following 5-bit values table apply to rxc-skew-ps and txc-skew-ps. + + Pad Skew Value Delay (ps) Devicetree Value + ------------------------------------------------------ + 0_0000 -900ps 0 + 0_0001 -840ps 60 + 0_0010 -780ps 120 + 0_0011 -720ps 180 + 0_0100 -660ps 240 + 0_0101 -600ps 300 + 0_0110 -540ps 360 + 0_0111 -480ps 420 + 0_1000 -420ps 480 + 0_1001 -360ps 540 + 0_1010 -300ps 600 + 0_1011 -240ps 660 + 0_1100 -180ps 720 + 0_1101 -120ps 780 + 0_1110 -60ps 840 + 0_1111 0ps 900 + 1_0000 60ps 960 + 1_0001 120ps 1020 + 1_0010 180ps 1080 + 1_0011 240ps 1140 + 1_0100 300ps 1200 + 1_0101 360ps 1260 + 1_0110 420ps 1320 + 1_0111 480ps 1380 + 1_1000 540ps 1440 + 1_1001 600ps 1500 + 1_1010 660ps 1560 + 1_1011 720ps 1620 + 1_1100 780ps 1680 + 1_1101 840ps 1740 + 1_1110 900ps 1800 + 1_1111 960ps 1860 + + The following 4-bit values table apply to the txdX-skew-ps, rxdX-skew-ps + data pads, and the rxdv-skew-ps, txen-skew-ps control pads. + + Pad Skew Value Delay (ps) Devicetree Value + ------------------------------------------------------ + 0000 -420ps 0 + 0001 -360ps 60 + 0010 -300ps 120 + 0011 -240ps 180 + 0100 -180ps 240 + 0101 -120ps 300 + 0110 -60ps 360 + 0111 0ps 420 + 1000 60ps 480 + 1001 120ps 540 + 1010 180ps 600 + 1011 240ps 660 + 1100 300ps 720 + 1101 360ps 780 + 1110 420ps 840 + 1111 480ps 900 + Optional properties: Maximum value of 1860, default value 900: @@ -120,11 +185,21 @@ KSZ9131: Examples: + /* Attach to an Ethernet device with autodetected PHY */ + &enet { + rxc-skew-ps = <1800>; + rxdv-skew-ps = <0>; + txc-skew-ps = <1800>; + txen-skew-ps = <0>; + status = "okay"; + }; + + /* Attach to an explicitly-specified PHY */ mdio { phy0: ethernet-phy@0 { - rxc-skew-ps = <3000>; + rxc-skew-ps = <1800>; rxdv-skew-ps = <0>; - txc-skew-ps = <3000>; + txc-skew-ps = <1800>; txen-skew-ps = <0>; reg = <0>; }; @@ -133,3 +208,20 @@ Examples: phy = <&phy0>; phy-mode = "rgmii-id"; }; + +References + + Micrel ksz9021rl/rn Data Sheet, Revision 1.2. Dated 2/13/2014. + http://www.micrel.com/_PDF/Ethernet/datasheets/ksz9021rl-rn_ds.pdf + + Micrel ksz9031rnx Data Sheet, Revision 2.1. Dated 11/20/2014. + http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf + +Notes: + + Note that a previous version of the Micrel ksz9021rl/rn Data Sheet + was missing extended register 106 (transmit data pad skews), and + incorrectly specified the ps per step as 200ps/step instead of + 120ps/step. The latest update to this document reflects the latest + revision of the Micrel specification even though usage in the kernel + still reflects that incorrect document. diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 8f86084bf12e..7443490d4cc6 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -43,7 +43,12 @@ description: properties: compatible: - const: "qcom,sdm845-ipa" + enum: + - qcom,sc7180-ipa + - qcom,sc7280-ipa + - qcom,sdm845-ipa + - qcom,sdx55-ipa + - qcom,sm8350-ipa reg: items: @@ -120,6 +125,14 @@ properties: the firmware passed to Trust Zone for authentication. Required when Trust Zone (not the modem) performs early initialization. + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: + If present, name (or relative path) of the file within the + firmware search path containing the firmware image used when + initializing IPA hardware. Optional, and only used when + Trust Zone performs early initialization. + required: - compatible - iommus @@ -129,12 +142,23 @@ required: - interconnects - qcom,smem-states +# Either modem-init is present, or memory-region must be present. oneOf: - required: - modem-init - required: - memory-region +# If memory-region is present, firmware-name may optionally be present. +# But if modem-init is present, firmware-name must not be present. +if: + required: + - modem-init +then: + not: + required: + - firmware-name + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index 91ba96d43c6c..005868f703a6 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -50,7 +50,16 @@ properties: interrupt-names: true clocks: - maxItems: 1 + minItems: 1 + items: + - description: AVB functional clock + - description: Optional TXC reference clock + + clock-names: + minItems: 1 + items: + - const: fck + - const: refclk iommus: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt deleted file mode 100644 index 3b71da7e8742..000000000000 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ /dev/null @@ -1,76 +0,0 @@ -Rockchip SoC RK3288 10/100/1000 Ethernet driver(GMAC) - -The device node has following properties. - -Required properties: - - compatible: should be "rockchip,<name>-gamc" - "rockchip,px30-gmac": found on PX30 SoCs - "rockchip,rk3128-gmac": found on RK312x SoCs - "rockchip,rk3228-gmac": found on RK322x SoCs - "rockchip,rk3288-gmac": found on RK3288 SoCs - "rockchip,rk3328-gmac": found on RK3328 SoCs - "rockchip,rk3366-gmac": found on RK3366 SoCs - "rockchip,rk3368-gmac": found on RK3368 SoCs - "rockchip,rk3399-gmac": found on RK3399 SoCs - "rockchip,rv1108-gmac": found on RV1108 SoCs - - reg: addresses and length of the register sets for the device. - - interrupts: Should contain the GMAC interrupts. - - interrupt-names: Should contain the interrupt names "macirq". - - rockchip,grf: phandle to the syscon grf used to control speed and mode. - - clocks: <&cru SCLK_MAC>: clock selector for main clock, from PLL or PHY. - <&cru SCLK_MAC_PLL>: PLL clock for SCLK_MAC - <&cru SCLK_MAC_RX>: clock gate for RX - <&cru SCLK_MAC_TX>: clock gate for TX - <&cru SCLK_MACREF>: clock gate for RMII referce clock - <&cru SCLK_MACREF_OUT> clock gate for RMII reference clock output - <&cru ACLK_GMAC>: AXI clock gate for GMAC - <&cru PCLK_GMAC>: APB clock gate for GMAC - - clock-names: One name for each entry in the clocks property. - - phy-mode: See ethernet.txt file in the same directory. - - pinctrl-names: Names corresponding to the numbered pinctrl states. - - pinctrl-0: pin-control mode. can be <&rgmii_pins> or <&rmii_pins>. - - clock_in_out: For RGMII, it must be "input", means main clock(125MHz) - is not sourced from SoC's PLL, but input from PHY; For RMII, "input" means - PHY provides the reference clock(50MHz), "output" means GMAC provides the - reference clock. - - snps,reset-gpio gpio number for phy reset. - - snps,reset-active-low boolean flag to indicate if phy reset is active low. - - assigned-clocks: main clock, should be <&cru SCLK_MAC>; - - assigned-clock-parents = parent of main clock. - can be <&ext_gmac> or <&cru SCLK_MAC_PLL>. - -Optional properties: - - tx_delay: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default. - - rx_delay: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default. - - phy-supply: phandle to a regulator if the PHY needs one - -Example: - -gmac: ethernet@ff290000 { - compatible = "rockchip,rk3288-gmac"; - reg = <0xff290000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - rockchip,grf = <&grf>; - clocks = <&cru SCLK_MAC>, - <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, - <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>, - <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; - clock-names = "stmmaceth", - "mac_clk_rx", "mac_clk_tx", - "clk_mac_ref", "clk_mac_refout", - "aclk_mac", "pclk_mac"; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins /*&rmii_pins*/>; - - clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; - snps,reset-active-low; - - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - tx_delay = <0x30>; - rx_delay = <0x10>; - -}; diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml new file mode 100644 index 000000000000..5acddb6171bf --- /dev/null +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/net/rockchip-dwmac.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Rockchip 10/100/1000 Ethernet driver(GMAC) + +maintainers: + - David Wu <david.wu@rock-chips.com> + +# We need a select here so we don't match all nodes with 'snps,dwmac' +select: + properties: + compatible: + contains: + enum: + - rockchip,px30-gmac + - rockchip,rk3128-gmac + - rockchip,rk3228-gmac + - rockchip,rk3288-gmac + - rockchip,rk3328-gmac + - rockchip,rk3366-gmac + - rockchip,rk3368-gmac + - rockchip,rk3399-gmac + - rockchip,rv1108-gmac + required: + - compatible + +allOf: + - $ref: "snps,dwmac.yaml#" + +properties: + compatible: + items: + - enum: + - rockchip,px30-gmac + - rockchip,rk3128-gmac + - rockchip,rk3228-gmac + - rockchip,rk3288-gmac + - rockchip,rk3328-gmac + - rockchip,rk3366-gmac + - rockchip,rk3368-gmac + - rockchip,rk3399-gmac + - rockchip,rv1108-gmac + + clocks: + minItems: 5 + maxItems: 8 + + clock-names: + contains: + enum: + - stmmaceth + - mac_clk_tx + - mac_clk_rx + - aclk_mac + - pclk_mac + - clk_mac_ref + - clk_mac_refout + - clk_mac_speed + + clock_in_out: + description: + For RGMII, it must be "input", means main clock(125MHz) + is not sourced from SoC's PLL, but input from PHY. + For RMII, "input" means PHY provides the reference clock(50MHz), + "output" means GMAC provides the reference clock. + $ref: /schemas/types.yaml#/definitions/string + enum: [input, output] + + rockchip,grf: + description: The phandle of the syscon node for the general register file. + $ref: /schemas/types.yaml#/definitions/phandle + + tx_delay: + description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default. + $ref: /schemas/types.yaml#/definitions/uint32 + + rx_delay: + description: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default. + $ref: /schemas/types.yaml#/definitions/uint32 + + phy-supply: + description: PHY regulator + +required: + - compatible + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/rk3288-cru.h> + + gmac: ethernet@ff290000 { + compatible = "rockchip,rk3288-gmac"; + reg = <0xff290000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC>, + <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, + <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; + clock-names = "stmmaceth", + "mac_clk_rx", "mac_clk_tx", + "clk_mac_ref", "clk_mac_refout", + "aclk_mac", "pclk_mac"; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + + rockchip,grf = <&grf>; + phy-mode = "rgmii"; + clock_in_out = "input"; + tx_delay = <0x30>; + rx_delay = <0x10>; + }; diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 0642b0f59491..2edd8bea993e 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -56,6 +56,15 @@ properties: - amlogic,meson8m2-dwmac - amlogic,meson-gxbb-dwmac - amlogic,meson-axg-dwmac + - rockchip,px30-gmac + - rockchip,rk3128-gmac + - rockchip,rk3228-gmac + - rockchip,rk3288-gmac + - rockchip,rk3328-gmac + - rockchip,rk3366-gmac + - rockchip,rk3368-gmac + - rockchip,rk3399-gmac + - rockchip,rv1108-gmac - snps,dwmac - snps,dwmac-3.50a - snps,dwmac-3.610 @@ -89,7 +98,7 @@ properties: clocks: minItems: 1 - maxItems: 5 + maxItems: 8 additionalItems: true items: - description: GMAC main clock @@ -101,7 +110,7 @@ properties: clock-names: minItems: 1 - maxItems: 5 + maxItems: 8 additionalItems: true contains: enum: diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml new file mode 100644 index 000000000000..c11f23b20c4c --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4329 family fullmac wireless SDIO devices + +maintainers: + - Arend van Spriel <arend@broadcom.com> + +description: + The Broadcom Single chip MAC part for the BCM4329 family and + later Cypress chips in the same family named CYW4373 and similar. + These chips also have a Bluetooth portion described in a separate + binding. + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm43143-fmac + - brcm,bcm4341b0-fmac + - brcm,bcm4341b4-fmac + - brcm,bcm4341b5-fmac + - brcm,bcm4329-fmac + - brcm,bcm4330-fmac + - brcm,bcm4334-fmac + - brcm,bcm43340-fmac + - brcm,bcm4335-fmac + - brcm,bcm43362-fmac + - brcm,bcm4339-fmac + - brcm,bcm43430a0-fmac + - brcm,bcm43430a1-fmac + - brcm,bcm43455-fmac + - brcm,bcm43456-fmac + - brcm,bcm4354-fmac + - brcm,bcm4356-fmac + - brcm,bcm4359-fmac + - cypress,cyw4373-fmac + - cypress,cyw43012-fmac + - const: brcm,bcm4329-fmac + - const: brcm,bcm4329-fmac + + reg: + description: SDIO function number for the device, for most cases + this will be 1. + + interrupts: + maxItems: 1 + description: Out-of-band (OOB) IRQ line for waking up the host + in response to WLAN activity. This corresponds to the HOST_WAKE + line into the chip. + + interrupt-names: + description: Name for the OOB IRQ, this must be set to "host-wake". + const: host-wake + + brcm,drive-strength: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Drive strength used for the SDIO pins on the device in mA. + minimum: 0 + maximum: 32 + + reset-gpios: + maxItems: 1 + description: A GPIO line connected to the WL_RST line, if present + this shall be flagged as active low. + + brcm,ccode-map: + $ref: /schemas/types.yaml#/definitions/string-array + description: Multiple strings for translating ISO3166 country code to + brcmfmac firmware country code and revision. + items: + pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$' + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + mmc@80118000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80118000 0x1000>; + clocks = <&clk 0>, <&clk 1>; + clock-names = "mclk", "apb_pclk"; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <4>; + non-removable; + vmmc-supply = <&wl_bt_reg>; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + brcm,ccode-map = "JP-JP-78", "US-Q2-86"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt deleted file mode 100644 index cffb2d6876e3..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ /dev/null @@ -1,38 +0,0 @@ -Broadcom BCM43xx Fullmac wireless SDIO devices - -This node provides properties for controlling the Broadcom wireless device. The -node is expected to be specified as a child node to the SDIO controller that -connects the device to the system. - -Required properties: - - - compatible : Should be "brcm,bcm4329-fmac". - -Optional properties: - - brcm,drive-strength : drive strength used for SDIO pins on device in mA - (default = 6). - - interrupts : specifies attributes for the out-of-band interrupt (host-wake). - When not specified the device will use in-band SDIO interrupts. - - interrupt-names : name of the out-of-band interrupt, which must be set - to "host-wake". - -Example: - -mmc3: mmc@1c12000 { - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&pio>; - interrupts = <10 8>; /* PH10 / EINT10 */ - interrupt-names = "host-wake"; - }; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.txt b/Documentation/devicetree/bindings/net/wireless/ieee80211.txt deleted file mode 100644 index f6442b1397f5..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/ieee80211.txt +++ /dev/null @@ -1,24 +0,0 @@ -Common IEEE 802.11 properties - -This provides documentation of common properties that are valid for all wireless -devices. - -Optional properties: - - ieee80211-freq-limit : list of supported frequency ranges in KHz. This can be - used for devices that in a given config support less channels than - normally. It may happen chipset supports a wide wireless band but it is - limited to some part of it due to used antennas or power amplifier. - An example case for this can be tri-band wireless router with two - identical chipsets used for two different 5 GHz subbands. Using them - incorrectly could not work or decrease performance noticeably. - -Example: - -pcie@0,0 { - reg = <0x0000 0 0 0 0>; - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - ieee80211-freq-limit = <2402000 2482000>, - <5170000 5250000>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml new file mode 100644 index 000000000000..d58e1571df9b --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/ieee80211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common IEEE 802.11 Binding + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + +description: | + This provides documentation of common properties that are valid for + all wireless devices + +properties: + ieee80211-freq-limit: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 + description: + List of supported frequency ranges in KHz. This can be used for devices + that in a given config support less channels than normally. It may happen + chipset supports a wide wireless band but it is limited to some part of + it due to used antennas or power amplifier. An example case for this + can be tri-band wireless router with two identical chipsets used for two + different 5 GHz subbands. Using them incorrectly could not work or + decrease performance noticeably + +additionalProperties: true + +examples: + - | + pcie0 { + #address-cells = <3>; + #size-cells = <2>; + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <2402000 2482000>, + <5170000 5250000>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt deleted file mode 100644 index ab7e7a00e534..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt +++ /dev/null @@ -1,78 +0,0 @@ -* MediaTek mt76xx devices - -This node provides properties for configuring the MediaTek mt76xx wireless -device. The node is expected to be specified as a child node of the PCI -controller to which the wireless chip is connected. - -Alternatively, it can specify the wireless part of the MT7628/MT7688 or -MT7622 SoC. For SoC, use the following compatible strings: - -compatible: -- "mediatek,mt7628-wmac" for MT7628/MT7688 -- "mediatek,mt7622-wmac" for MT7622 - -properties: -- reg: Address and length of the register set for the device. -- interrupts: Main device interrupt - -MT7622 specific properties: -- power-domains: phandle to the power domain that the WMAC is part of -- mediatek,infracfg: phandle to the infrastructure bus fabric syscon node - -Optional properties: - -- ieee80211-freq-limit: See ieee80211.txt -- mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data -- big-endian: if the radio eeprom partition is written in big-endian, specify - this property -- mediatek,eeprom-merge-otp: Merge EEPROM data with OTP data. Can be used on - boards where the flash calibration data is generic and specific calibration - data should be pulled from the OTP ROM - -The MAC address can as well be set with corresponding optional properties -defined in net/ethernet.txt. - -Optional nodes: -- led: Properties for a connected LED - Optional properties: - - led-sources: See Documentation/devicetree/bindings/leds/common.txt - -&pcie { - pcie0 { - wifi@0,0 { - compatible = "mediatek,mt76"; - reg = <0x0000 0 0 0 0>; - ieee80211-freq-limit = <5000000 6000000>; - mediatek,mtd-eeprom = <&factory 0x8000>; - big-endian; - - led { - led-sources = <2>; - }; - }; - }; -}; - -MT7628 example: - -wmac: wmac@10300000 { - compatible = "mediatek,mt7628-wmac"; - reg = <0x10300000 0x100000>; - - interrupt-parent = <&cpuintc>; - interrupts = <6>; - - mediatek,mtd-eeprom = <&factory 0x0000>; -}; - -MT7622 example: - -wmac: wmac@18000000 { - compatible = "mediatek,mt7622-wmac"; - reg = <0 0x18000000 0 0x100000>; - interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>; - - mediatek,infracfg = <&infracfg>; - - power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml new file mode 100644 index 000000000000..3e2c2e43175e --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -0,0 +1,228 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek mt76 wireless devices Generic Binding + +maintainers: + - Felix Fietkau <nbd@nbd.name> + - Lorenzo Bianconi <lorenzo@kernel.org> + - Ryder Lee <ryder.lee@mediatek.com> + +description: | + This node provides properties for configuring the MediaTek mt76xx + wireless device. The node is expected to be specified as a child + node of the PCI controller to which the wireless chip is connected. + Alternatively, it can specify the wireless part of the MT7628/MT7688 + or MT7622 SoC. + +allOf: + - $ref: ieee80211.yaml# + +properties: + compatible: + enum: + - mediatek,mt76 + - mediatek,mt7628-wmac + - mediatek,mt7622-wmac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the infrastructure bus fabric syscon node. + This property is MT7622 specific + + ieee80211-freq-limit: true + + mediatek,mtd-eeprom: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Phandle to a MTD partition + offset containing EEPROM data + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: + Specify if the radio eeprom partition is written in big-endian + + mediatek,eeprom-merge-otp: + type: boolean + description: + Merge EEPROM data with OTP data. Can be used on boards where the flash + calibration data is generic and specific calibration data should be + pulled from the OTP ROM + + led: + type: object + $ref: /schemas/leds/common.yaml# + additionalProperties: false + properties: + led-sources: + maxItems: 1 + + power-limits: + type: object + additionalProperties: false + patternProperties: + "^r[0-9]+": + type: object + additionalProperties: false + properties: + regdomain: + $ref: /schemas/types.yaml#/definitions/string + description: + Regdomain refers to a legal regulatory region. Different + countries define different levels of allowable transmitter + power, time that a channel can be occupied, and different + available channels + enum: + - FCC + - ETSI + - JP + + patternProperties: + "^txpower-[256]g$": + type: object + additionalProperties: false + patternProperties: + "^b[0-9]+$": + type: object + additionalProperties: false + properties: + channels: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + description: + Pairs of first and last channel number of the selected + band + + rates-cck: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 4 + maxItems: 4 + description: + 4 half-dBm per-rate power limit values + + rates-ofdm: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 8 + maxItems: 8 + description: + 8 half-dBm per-rate power limit values + + rates-mcs: + $ref: /schemas/types.yaml#/definitions/uint8-matrix + description: + Sets of per-rate power limit values for 802.11n/802.11ac + rates for multiple channel bandwidth settings. + Each set starts with the number of channel bandwidth + settings for which the rate set applies, followed by + either 8 or 10 power limit values. The order of the + channel bandwidth settings is 20, 40, 80 and 160 MHz. + maxItems: 4 + items: + minItems: 9 + maxItems: 11 + + rates-ru: + $ref: /schemas/types.yaml#/definitions/uint8-matrix + description: + Sets of per-rate power limit values for 802.11ax rates + for multiple channel bandwidth or resource unit settings. + Each set starts with the number of channel bandwidth or + resource unit settings for which the rate set applies, + followed by 12 power limit values. The order of the + channel resource unit settings is RU26, RU52, RU106, + RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160. + items: + minItems: 13 + maxItems: 13 + + txs-delta: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Half-dBm power delta for different numbers of antennas + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pcie0 { + #address-cells = <3>; + #size-cells = <2>; + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5000000 6000000>; + mediatek,mtd-eeprom = <&factory 0x8000>; + big-endian; + + led { + led-sources = <2>; + }; + + power-limits { + r0 { + regdomain = "FCC"; + txpower-5g { + b0 { + channels = <36 48>; + rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>; + rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>, + <3 22 22 22 22 22 22 22 22 22 22>; + rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>, + <4 20 20 20 20 20 20 20 20 20 20 20 20>; + }; + b1 { + channels = <100 181>; + rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>; + rates-mcs = /bits/ 8 <4 14 14 14 14 14 14 14 14 14 14>; + txs-delta = <12 9 6>; + rates-ru = /bits/ 8 <7 14 14 14 14 14 14 14 14 14 14 14 14>; + }; + }; + }; + }; + }; + }; + + - | + wifi@10300000 { + compatible = "mediatek,mt7628-wmac"; + reg = <0x10300000 0x100000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + mediatek,mtd-eeprom = <&factory 0x0>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + wifi@18000000 { + compatible = "mediatek,mt7622-wmac"; + reg = <0x10300000 0x100000>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>; + + mediatek,infracfg = <&infracfg>; + + power-domains = <&scpsys 3>; + }; diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt index 2cd452419ed0..b8e4894bc634 100644 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -42,11 +42,23 @@ Optional properties: support both 1000BaseX and SGMII modes. If set, the phy-mode should be set to match the mode selected on core reset (i.e. by the basex_or_sgmii core input line). -- clocks : AXI bus clock for the device. Refer to common clock bindings. - Used to calculate MDIO clock divisor. If not specified, it is - auto-detected from the CPU clock (but only on platforms where - this is possible). New device trees should specify this - the - auto detection is only for backward compatibility. +- clock-names: Tuple listing input clock names. Possible clocks: + s_axi_lite_clk: Clock for AXI register slave interface + axis_clk: AXI4-Stream clock for TXD RXD TXC and RXS interfaces + ref_clk: Ethernet reference clock, used by signal delay + primitives and transceivers + mgt_clk: MGT reference clock (used by optional internal + PCS/PMA PHY) + + Note that if s_axi_lite_clk is not specified by name, the + first clock of any name is used for this. If that is also not + specified, the clock rate is auto-detected from the CPU clock + (but only on platforms where this is possible). New device + trees should specify all applicable clocks by name - the + fallbacks to an unnamed clock or to CPU clock are only for + backward compatibility. +- clocks: Phandles to input clocks matching clock-names. Refer to common + clock bindings. - axistream-connected: Reference to another node which contains the resources for the AXI DMA controller used by this device. If this is specified, the DMA-related resources from that @@ -62,7 +74,8 @@ Example: device_type = "network"; interrupt-parent = <µblaze_0_axi_intc>; interrupts = <2 0 1>; - clocks = <&axi_clk>; + clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; + clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; phy-mode = "mii"; reg = <0x40c00000 0x40000 0x50c00000 0x40000>; xlnx,rxcsum = <0x2>; diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml new file mode 100644 index 000000000000..58ff6b0bdb1a --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/brcm,nvram.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom's NVRAM + +description: | + Broadcom's NVRAM is a structure containing device specific environment + variables. It is used for storing device configuration, booting parameters + and calibration data. + + NVRAM can be accessed on Broadcom BCM47xx MIPS and Northstar ARM Cortex-A9 + devices usiong I/O mapped memory. + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + const: brcm,nvram + +unevaluatedProperties: false + +examples: + - | + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt index ef93c3b95424..d479ad977e24 100644 --- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt @@ -7,7 +7,9 @@ Required properties: "mediatek,mt7622-efuse", "mediatek,efuse": for MT7622 "mediatek,mt7623-efuse", "mediatek,efuse": for MT7623 "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173 + "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192 "mediatek,mt8516-efuse", "mediatek,efuse": for MT8516 + "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192 - reg: Should contain registers location and length = Data cells = diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml index d5d7f113bade..b1da238c8bcb 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml @@ -2,7 +2,7 @@ %YAML 1.2 --- $id: http://devicetree.org/schemas/nvmem/nvmem-consumer.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# +$schema: http://devicetree.org/meta-schemas/base.yaml# title: NVMEM (Non Volatile Memory) Consumer Device Tree Bindings @@ -23,12 +23,10 @@ properties: List of phandle to the nvmem data cells. nvmem-names: - $ref: /schemas/types.yaml#/definitions/string-array description: Names for the each nvmem provider. nvmem-cell-names: - $ref: /schemas/types.yaml#/definitions/string-array description: Names for each nvmem-cells specified. diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml index 7481a9e48f19..b8dc3d2b6e92 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -20,9 +20,6 @@ description: | storage device. properties: - $nodename: - pattern: "^(eeprom|efuse|nvram)(@.*|-[0-9a-f])*$" - "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 992777c90a0b..861b205016b1 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -24,6 +24,7 @@ properties: - qcom,msm8998-qfprom - qcom,qcs404-qfprom - qcom,sc7180-qfprom + - qcom,sc7280-qfprom - qcom,sdm845-qfprom - const: qcom,qfprom diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt deleted file mode 100644 index d6796ef54ea1..000000000000 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ /dev/null @@ -1,43 +0,0 @@ -HiSilicon Hip05 and Hip06 PCIe host bridge DT description - -HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core. -It shares common functions with the PCIe DesignWare core driver and inherits -common properties defined in -Documentation/devicetree/bindings/pci/designware-pcie.txt. - -Additional properties are described here: - -Required properties -- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie". -- reg: Should contain rc_dbi, config registers location and length. -- reg-names: Must include the following entries: - "rc_dbi": controller configuration registers; - "config": PCIe configuration space registers. -- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. -- port-id: Should be 0, 1, 2 or 3. - -Optional properties: -- status: Either "ok" or "disabled". -- dma-coherent: Present if DMA operations are coherent. - -Hip05 Example (note that Hip06 is the same except compatible): - pcie@b0080000 { - compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; - reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; - reg-names = "rc_dbi", "config"; - bus-range = <0 15>; - msi-parent = <&its_pcie>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; - num-lanes = <8>; - port-id = <1>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0x0 0 0 1 &mbigen_pcie 1 10 - 0x0 0 0 2 &mbigen_pcie 2 11 - 0x0 0 0 3 &mbigen_pcie 3 12 - 0x0 0 0 4 &mbigen_pcie 4 13>; - }; diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml new file mode 100644 index 000000000000..e7b1f9892da4 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml @@ -0,0 +1,181 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Gen3 PCIe controller on MediaTek SoCs + +maintainers: + - Jianjun Wang <jianjun.wang@mediatek.com> + +description: |+ + PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed + and compatible with Gen2, Gen1 speed. + + This PCIe controller supports up to 256 MSI vectors, the MSI hardware + block diagram is as follows: + + +-----+ + | GIC | + +-----+ + ^ + | + port->irq + | + +-+-+-+-+-+-+-+-+ + |0|1|2|3|4|5|6|7| (PCIe intc) + +-+-+-+-+-+-+-+-+ + ^ ^ ^ + | | ... | + +-------+ +------+ +-----------+ + | | | + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ + |0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets) + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ + ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ + | | | | | | | | | | | | (MSI vectors) + | | | | | | | | | | | | + + (MSI SET0) (MSI SET1) ... (MSI SET7) + + With 256 MSI vectors supported, the MSI vectors are composed of 8 sets, + each set has its own address for MSI message, and supports 32 MSI vectors + to generate interrupt. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: mediatek,mt8192-pcie + + reg: + maxItems: 1 + + reg-names: + items: + - const: pcie-mac + + interrupts: + maxItems: 1 + + ranges: + minItems: 1 + maxItems: 8 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + maxItems: 2 + items: + - const: phy + - const: mac + + clocks: + maxItems: 6 + + clock-names: + items: + - const: pl_250m + - const: tl_26m + - const: tl_96m + - const: tl_32k + - const: peri_26m + - const: top_133m + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + phys: + maxItems: 1 + + '#interrupt-cells': + const: 1 + + interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + properties: + '#address-cells': + const: 0 + '#interrupt-cells': + const: 1 + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - ranges + - clocks + - '#interrupt-cells' + - interrupt-controller + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie: pcie@11230000 { + compatible = "mediatek,mt8192-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0x00 0x11230000 0x00 0x4000>; + reg-names = "pcie-mac"; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0x00 0x12000000 0x00 + 0x12000000 0x00 0x1000000>; + clocks = <&infracfg 44>, + <&infracfg 40>, + <&infracfg 43>, + <&infracfg 97>, + <&infracfg 99>, + <&infracfg 111>; + clock-names = "pl_250m", "tl_26m", "tl_96m", + "tl_32k", "peri_26m", "top_133m"; + assigned-clocks = <&topckgen 50>; + assigned-clock-parents = <&topckgen 91>; + + phys = <&pciephy>; + phy-names = "pcie-phy"; + + resets = <&infracfg_rst 2>, + <&infracfg_rst 3>; + reset-names = "phy", "mac"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml index 4a2bcc0158e2..8fdfbc763d70 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml @@ -17,6 +17,7 @@ allOf: properties: compatible: oneOf: + - const: renesas,pcie-r8a7779 # R-Car H1 - items: - enum: - renesas,pcie-r8a7742 # RZ/G1H @@ -74,7 +75,16 @@ required: - clocks - clock-names - power-domains - - resets + +if: + not: + properties: + compatible: + contains: + const: renesas,pcie-r8a7779 +then: + required: + - resets unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml new file mode 100644 index 000000000000..b03cbb9b6602 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/sifive,fu740-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive FU740 PCIe host controller + +description: |+ + SiFive FU740 PCIe host controller is based on the Synopsys DesignWare + PCI core. It shares common features with the PCIe DesignWare core and + inherits common properties defined in + Documentation/devicetree/bindings/pci/designware-pcie.txt. + +maintainers: + - Paul Walmsley <paul.walmsley@sifive.com> + - Greentime Hu <greentime.hu@sifive.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: sifive,fu740-pcie + + reg: + maxItems: 3 + + reg-names: + items: + - const: dbi + - const: config + - const: mgmt + + num-lanes: + const: 8 + + msi-parent: true + + interrupt-names: + items: + - const: msi + - const: inta + - const: intb + - const: intc + - const: intd + + resets: + description: A phandle to the PCIe power up reset line. + maxItems: 1 + + pwren-gpios: + description: Should specify the GPIO for controlling the PCI bus device power on. + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - dma-coherent + - num-lanes + - interrupts + - interrupt-names + - interrupt-parent + - interrupt-map-mask + - interrupt-map + - clock-names + - clocks + - resets + - pwren-gpios + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + #include <dt-bindings/clock/sifive-fu740-prci.h> + + pcie@e00000000 { + compatible = "sifive,fu740-pcie"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + reg = <0xe 0x00000000 0x0 0x80000000>, + <0xd 0xf0000000 0x0 0x10000000>, + <0x0 0x100d0000 0x0 0x1000>; + reg-names = "dbi", "config", "mgmt"; + device_type = "pci"; + dma-coherent; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000>, /* mem */ + <0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000>, /* mem */ + <0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; /* mem prefetchable */ + num-lanes = <0x8>; + interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>; + interrupt-names = "msi", "inta", "intb", "intc", "intd"; + interrupt-parent = <&plic0>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>, + <0x0 0x0 0x0 0x2 &plic0 58>, + <0x0 0x0 0x0 0x3 &plic0 59>, + <0x0 0x0 0x0 0x4 &plic0 60>; + clock-names = "pcie_aux"; + clocks = <&prci PRCI_CLK_PCIE_AUX>; + resets = <&prci 4>; + pwren-gpios = <&gpio 5 0>; + reset-gpios = <&gpio 8 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/tango-pcie.txt b/Documentation/devicetree/bindings/pci/tango-pcie.txt deleted file mode 100644 index 244683836a79..000000000000 --- a/Documentation/devicetree/bindings/pci/tango-pcie.txt +++ /dev/null @@ -1,29 +0,0 @@ -Sigma Designs Tango PCIe controller - -Required properties: - -- compatible: "sigma,smp8759-pcie" -- reg: address/size of PCI configuration space, address/size of register area -- bus-range: defined by size of PCI configuration space -- device_type: "pci" -- #size-cells: <2> -- #address-cells: <3> -- msi-controller -- ranges: translation from system to bus addresses -- interrupts: spec for misc interrupts, spec for MSI - -Example: - - pcie@2e000 { - compatible = "sigma,smp8759-pcie"; - reg = <0x50000000 0x400000>, <0x2e000 0x100>; - bus-range = <0 3>; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - msi-controller; - ranges = <0x02000000 0x0 0x00400000 0x50400000 0x0 0x3c00000>; - interrupts = - <54 IRQ_TYPE_LEVEL_HIGH>, /* misc interrupts */ - <55 IRQ_TYPE_LEVEL_HIGH>; /* MSI */ - }; diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml index d06f0c4464c6..aed437dac363 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml @@ -16,12 +16,14 @@ allOf: properties: compatible: oneOf: - - description: PCIe EP controller in J7200 + - const: ti,j721e-pcie-ep + - description: PCIe EP controller in AM64 items: - - const: ti,j7200-pcie-ep + - const: ti,am64-pcie-ep - const: ti,j721e-pcie-ep - - description: PCIe EP controller in J721E + - description: PCIe EP controller in J7200 items: + - const: ti,j7200-pcie-ep - const: ti,j721e-pcie-ep reg: @@ -66,7 +68,6 @@ required: - power-domains - clocks - clock-names - - dma-coherent - max-functions - phys - phy-names diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml index 0880a613ece6..cc900202df29 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml @@ -16,12 +16,14 @@ allOf: properties: compatible: oneOf: - - description: PCIe controller in J7200 + - const: ti,j721e-pcie-host + - description: PCIe controller in AM64 items: - - const: ti,j7200-pcie-host + - const: ti,am64-pcie-host - const: ti,j721e-pcie-host - - description: PCIe controller in J721E + - description: PCIe controller in J7200 items: + - const: ti,j7200-pcie-host - const: ti,j721e-pcie-host reg: @@ -46,12 +48,17 @@ properties: maxItems: 1 clocks: - maxItems: 1 - description: clock-specifier to represent input to the PCIe + minItems: 1 + maxItems: 2 + description: |+ + clock-specifier to represent input to the PCIe for 1 item. + 2nd item if present represents reference clock to the connector. clock-names: + minItems: 1 items: - const: fck + - const: pcie_refclk vendor-id: const: 0x104c @@ -62,6 +69,8 @@ properties: - const: 0xb00d - items: - const: 0xb00f + - items: + - const: 0xb010 msi-map: true @@ -78,7 +87,6 @@ required: - vendor-id - device-id - msi-map - - dma-coherent - dma-ranges - ranges - reset-gpios diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt index 01bf7fdf4c19..2d677e90a7e2 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt @@ -33,6 +33,8 @@ Required properties: - #address-cells: specifies the number of cells needed to encode an address. The value must be 0. +Optional properties: +- dma-coherent: present if DMA operations are coherent Example: ++++++++ diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt deleted file mode 100644 index a7aee9ea8926..000000000000 --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt +++ /dev/null @@ -1,21 +0,0 @@ -Driver for Broadcom Northstar USB 2.0 PHY - -Required properties: -- compatible: brcm,ns-usb2-phy -- reg: iomem address range of DMU (Device Management Unit) -- reg-names: "dmu", the only needed & supported reg right now -- clocks: USB PHY reference clock -- clock-names: "phy-ref-clk", the only needed & supported clock right now - -To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it -requires passing phandle to the USB PHY reference clock. - -Example: - usb2-phy { - compatible = "brcm,ns-usb2-phy"; - reg = <0x1800c000 0x1000>; - reg-names = "dmu"; - #phy-cells = <0>; - clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; - clock-names = "phy-ref-clk"; - }; diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml new file mode 100644 index 000000000000..05b4dcd80019 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/bcm-ns-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar USB 2.0 PHY + +description: > + To initialize USB 2.0 PHY driver needs to setup PLL correctly. + To do this it requires passing phandle to the USB PHY reference clock. + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + compatible: + const: brcm,ns-usb2-phy + + reg: + items: + - description: iomem address range of DMU (Device Management Unit) + + reg-names: + items: + - const: dmu + + clocks: + items: + - description: USB PHY reference clock + + clock-names: + items: + - const: phy-ref-clk + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm-nsp.h> + phy@1800c000 { + compatible = "brcm,ns-usb2-phy"; + reg = <0x1800c000 0x1000>; + reg-names = "dmu"; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt deleted file mode 100644 index 32f057260351..000000000000 --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt +++ /dev/null @@ -1,34 +0,0 @@ -Driver for Broadcom Northstar USB 3.0 PHY - -Required properties: - -- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy". -- reg: address of MDIO bus device -- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin) - registers -- #phy-cells: must be 0 - -Initialization of USB 3.0 PHY depends on Northstar version. There are currently -three known series: Ax, Bx and Cx. -Known A0: BCM4707 rev 0 -Known B0: BCM4707 rev 4, BCM53573 rev 2 -Known B1: BCM4707 rev 6 -Known C0: BCM47094 rev 0 - -Example: - mdio: mdio@0 { - reg = <0x0>; - #size-cells = <1>; - #address-cells = <0>; - - usb3-phy@10 { - compatible = "brcm,ns-ax-usb3-phy"; - reg = <0x10>; - usb3-dmp-syscon = <&usb3_dmp>; - #phy-cells = <0>; - }; - }; - - usb3_dmp: syscon@18105000 { - reg = <0x18105000 0x1000>; - }; diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml new file mode 100644 index 000000000000..7fd419db45d0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/bcm-ns-usb3-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar USB 3.0 PHY + +description: | + Initialization of USB 3.0 PHY depends on Northstar version. There are currently + three known series: Ax, Bx and Cx. + Known A0: BCM4707 rev 0 + Known B0: BCM4707 rev 4, BCM53573 rev 2 + Known B1: BCM4707 rev 6 + Known C0: BCM47094 rev 0 + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + compatible: + enum: + - brcm,ns-ax-usb3-phy + - brcm,ns-bx-usb3-phy + + reg: + description: address of MDIO bus device + maxItems: 1 + + usb3-dmp-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the DMP (Device Management Plugin) syscon + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - usb3-dmp-syscon + - "#phy-cells" + +additionalProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + usb3-phy@10 { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + }; + }; + + usb3_dmp: syscon@18105000 { + reg = <0x18105000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml index 0497368d1fca..5f9e91bfb5ff 100644 --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml @@ -42,6 +42,9 @@ properties: - const: usb_mdio - const: bdc_ec + power-domains: + maxItems: 1 + clocks: minItems: 1 maxItems: 2 diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml new file mode 100644 index 000000000000..2437c3683326 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/marvell,armada-3700-utmi-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Marvell Armada UTMI/UTMI+ PHY + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +description: + On Armada 3700, there are two USB controllers, one is compatible with + the USB2 and USB3 specifications and supports OTG. The other one is USB2 + compliant and only supports host mode. Both of these controllers come with + a slightly different UTMI PHY. + +properties: + compatible: + enum: + - marvell,a3700-utmi-host-phy + - marvell,a3700-utmi-otg-phy + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + marvell,usb-misc-reg: + description: + Phandle on the "USB miscellaneous registers" shared region + covering registers related to both the host controller and + the PHY. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - "#phy-cells" + - marvell,usb-misc-reg + +additionalProperties: false + +examples: + - | + usb2_utmi_host_phy: phy@5f000 { + compatible = "marvell,armada-3700-utmi-host-phy"; + reg = <0x5f000 0x800>; + marvell,usb-misc-reg = <&usb2_syscon>; + #phy-cells = <0>; + }; + + usb2_syscon: system-controller@5f800 { + compatible = "marvell,armada-3700-usb2-host-misc", "syscon"; + reg = <0x5f800 0x800>; + }; diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml new file mode 100644 index 000000000000..30f3b5f32a95 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/marvell,armada-cp110-utmi-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Marvell Armada CP110/CP115 UTMI PHY + +maintainers: + - Konstantin Porotchkin <kostap@marvell.com> + +description: + On Armada 7k/8k and CN913x, there are two host and one device USB controllers. + Each of two exiting UTMI PHYs could be connected to either USB host or USB device + controller. + The USB device controller can only be connected to a single UTMI PHY port + 0.H----- USB HOST0 + UTMI PHY0 --------/ + 0.D-----0 + \------ USB DEVICE + 1.D-----1 + UTMI PHY1 --------\ + 1.H----- USB HOST1 + +properties: + compatible: + const: marvell,cp110-utmi-phy + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + marvell,system-controller: + description: + Phandle to the system controller node + $ref: /schemas/types.yaml#/definitions/phandle + +#Required child nodes: + +patternProperties: + "^usb-phy@[0|1]$": + type: object + description: + Each UTMI PHY port must be represented as a sub-node. + + properties: + reg: + description: phy port index. + maxItems: 1 + + "#phy-cells": + const: 0 + + required: + - reg + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - marvell,system-controller + +additionalProperties: false + +examples: + - | + cp0_utmi: utmi@580000 { + compatible = "marvell,cp110-utmi-phy"; + reg = <0x580000 0x2000>; + marvell,system-controller = <&cp0_syscon0>; + #address-cells = <1>; + #size-cells = <0>; + + cp0_utmi0: usb-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + cp0_utmi1: usb-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; + + cp0_usb3_0 { + usb-phy = <&cp0_usb3_0_phy0>; + phys = <&cp0_utmi0>; + phy-names = "utmi"; + /* UTMI0 is connected to USB host controller (default mode) */ + dr_mode = "host"; + }; + + cp0_usb3_1 { + usb-phy = <&cp0_usb3_0_phy1>; + phys = <&cp0_utmi1>; + phy-names = "utmi"; + /* UTMI1 is connected to USB device controller */ + dr_mode = "peripheral"; + }; diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml index 71d4acea1f66..6e4d795f9b02 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml @@ -19,11 +19,14 @@ properties: pattern: "^dsi-phy@[0-9a-f]+$" compatible: - enum: - - mediatek,mt2701-mipi-tx - - mediatek,mt7623-mipi-tx - - mediatek,mt8173-mipi-tx - - mediatek,mt8183-mipi-tx + oneOf: + - items: + - enum: + - mediatek,mt7623-mipi-tx + - const: mediatek,mt2701-mipi-tx + - const: mediatek,mt2701-mipi-tx + - const: mediatek,mt8173-mipi-tx + - const: mediatek,mt8183-mipi-tx reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml index 4752517a1446..0d94950b84ca 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml @@ -21,10 +21,13 @@ properties: pattern: "^hdmi-phy@[0-9a-f]+$" compatible: - enum: - - mediatek,mt2701-hdmi-phy - - mediatek,mt7623-hdmi-phy - - mediatek,mt8173-hdmi-phy + oneOf: + - items: + - enum: + - mediatek,mt7623-hdmi-phy + - const: mediatek,mt2701-hdmi-phy + - const: mediatek,mt2701-hdmi-phy + - const: mediatek,mt8173-hdmi-phy reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index 602e6ff45785..b8a7651a3d9a 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -79,6 +79,7 @@ properties: - mediatek,mt2712-tphy - mediatek,mt7629-tphy - mediatek,mt8183-tphy + - mediatek,mt8195-tphy - const: mediatek,generic-tphy-v2 - const: mediatek,mt2701-u3phy deprecated: true @@ -117,7 +118,7 @@ properties: # Required child node: patternProperties: - "^usb-phy@[0-9a-f]+$": + "^(usb|pcie|sata)-phy@[0-9a-f]+$": type: object description: A sub-node is required for each port the controller provides. diff --git a/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml index 3a9be82e7f13..74cc32c1d2e8 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml @@ -22,7 +22,12 @@ properties: pattern: "^ufs-phy@[0-9a-f]+$" compatible: - const: mediatek,mt8183-ufsphy + oneOf: + - items: + - enum: + - mediatek,mt8195-ufsphy + - const: mediatek,mt8183-ufsphy + - const: mediatek,mt8183-ufsphy reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml new file mode 100644 index 000000000000..bdbdb3bbddbe --- /dev/null +++ b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/microchip,sparx5-serdes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Sparx5 Serdes controller + +maintainers: + - Steen Hegelund <steen.hegelund@microchip.com> + +description: | + The Sparx5 SERDES interfaces share the same basic functionality, but + support different operating modes and line rates. + + The following list lists the SERDES features: + + * RX Adaptive Decision Feedback Equalizer (DFE) + * Programmable continuous time linear equalizer (CTLE) + * Rx variable gain control + * Rx built-in fault detector (loss-of-lock/loss-of-signal) + * Adjustable tx de-emphasis (FFE) + * Tx output amplitude control + * Supports rx eye monitor + * Multiple loopback modes + * Prbs generator and checker + * Polarity inversion control + + SERDES6G: + + The SERDES6G is a high-speed SERDES interface, which can operate at + the following data rates: + + * 100 Mbps (100BASE-FX) + * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX) + * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX) + * 5.15625 Gbps (5GBASE-KR/5G-USXGMII) + + SERDES10G + + The SERDES10G is a high-speed SERDES interface, which can operate at + the following data rates: + + * 100 Mbps (100BASE-FX) + * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX) + * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX) + * 5 Gbps (QSGMII/USGMII) + * 5.15625 Gbps (5GBASE-KR/5G-USXGMII) + * 10 Gbps (10G-USGMII) + * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII) + + SERDES25G + + The SERDES25G is a high-speed SERDES interface, which can operate at + the following data rates: + + * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX) + * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX) + * 5 Gbps (QSGMII/USGMII) + * 5.15625 Gbps (5GBASE-KR/5G-USXGMII) + * 10 Gbps (10G-USGMII) + * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII) + * 25.78125 Gbps (25GBASE-KR/25GBASE-CR/25GBASE-SR/25GBASE-LR/25GBASE-ER) + +properties: + $nodename: + pattern: "^serdes@[0-9a-f]+$" + + compatible: + const: microchip,sparx5-serdes + + reg: + minItems: 1 + + '#phy-cells': + const: 1 + description: | + - The main serdes input port + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - '#phy-cells' + - clocks + +additionalProperties: false + +examples: + - | + serdes: serdes@10808000 { + compatible = "microchip,sparx5-serdes"; + #phy-cells = <1>; + clocks = <&sys_clk>; + reg = <0x10808000 0x5d0000>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt index 38c5fa21f435..b62397d2bb0c 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -54,6 +54,7 @@ For Tegra210: - avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. - dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. - hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. +- nvidia,pmc: phandle and specifier referring to the Tegra210 PMC node. For Tegra186: - avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml index d210843863df..84383e2e0b34 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml @@ -26,6 +26,9 @@ properties: '#size-cells': const: 0 + '#clock-cells': + const: 1 + resets: minItems: 1 maxItems: 2 @@ -49,12 +52,24 @@ properties: const: serdes clocks: - maxItems: 2 + minItems: 2 + maxItems: 4 clock-names: + minItems: 2 items: - const: cmn_refclk_dig_div - const: cmn_refclk1_dig_div + - const: pll0_refclk + - const: pll1_refclk + + assigned-clocks: + minItems: 1 + maxItems: 2 + + assigned-clock-parents: + minItems: 1 + maxItems: 2 cdns,autoconf: type: boolean diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index e266ade53d87..01dcd14e7b2a 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -28,13 +28,27 @@ properties: '#size-cells': const: 0 + '#clock-cells': + const: 1 + clocks: - maxItems: 1 + minItems: 1 + maxItems: 2 description: - PHY reference clock. Must contain an entry in clock-names. + PHY reference clock for 1 item. Must contain an entry in clock-names. + Optional Parent to enable output reference clock. clock-names: - const: refclk + minItems: 1 + items: + - const: refclk + - const: phy_en_refclk + + assigned-clocks: + maxItems: 3 + + assigned-clock-parents: + maxItems: 3 reg: minItems: 1 @@ -170,7 +184,7 @@ examples: }; - | #include <dt-bindings/phy/phy.h> - #include <dt-bindings/phy/phy-cadence-torrent.h> + #include <dt-bindings/phy/phy-cadence.h> bus { #address-cells = <2>; diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt deleted file mode 100644 index aa99ceec73b0..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt +++ /dev/null @@ -1,38 +0,0 @@ -MVEBU A3700 UTMI PHY --------------------- - -USB2 UTMI+ PHY controllers can be found on the following Marvell MVEBU SoCs: -* Armada 3700 - -On Armada 3700, there are two USB controllers, one is compatible with the USB2 -and USB3 specifications and supports OTG. The other one is USB2 compliant and -only supports host mode. Both of these controllers come with a slightly -different UTMI PHY. - -Required Properties: - -- compatible: Should be one of: - * "marvell,a3700-utmi-host-phy" for the PHY connected to - the USB2 host-only controller. - * "marvell,a3700-utmi-otg-phy" for the PHY connected to - the USB3 and USB2 OTG capable controller. -- reg: PHY IP register range. -- marvell,usb-misc-reg: handle on the "USB miscellaneous registers" shared - region covering registers related to both the host - controller and the PHY. -- #phy-cells: Standard property (Documentation: phy-bindings.txt) Should be 0. - - -Example: - - usb2_utmi_host_phy: phy@5f000 { - compatible = "marvell,armada-3700-utmi-host-phy"; - reg = <0x5f000 0x800>; - marvell,usb-misc-reg = <&usb2_syscon>; - #phy-cells = <0>; - }; - - usb2_syscon: system-controller@5f800 { - compatible = "marvell,armada-3700-usb2-host-misc", "syscon"; - reg = <0x5f800 0x800>; - }; diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml index 46df6786727a..018cc1246ee1 100644 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml @@ -51,6 +51,10 @@ properties: vdda1v8-supply: description: regulator providing 1V8 power supply to the PLL block + '#clock-cells': + description: number of clock cells for ck_usbo_48m consumer + const: 0 + #Required child nodes: patternProperties: @@ -120,6 +124,7 @@ examples: vdda1v8-supply = <®18>; #address-cells = <1>; #size-cells = <0>; + #clock-cells = <0>; usbphyc_port0: usb-phy@0 { reg = <0>; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index 626447fee092..7808ec8bc712 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -25,11 +25,13 @@ properties: - qcom,msm8998-qmp-pcie-phy - qcom,msm8998-qmp-ufs-phy - qcom,msm8998-qmp-usb3-phy + - qcom,sc7180-qmp-usb3-phy - qcom,sc8180x-qmp-ufs-phy - qcom,sc8180x-qmp-usb3-phy - qcom,sdm845-qhp-pcie-phy - qcom,sdm845-qmp-pcie-phy - qcom,sdm845-qmp-ufs-phy + - qcom,sdm845-qmp-usb3-phy - qcom,sdm845-qmp-usb3-uni-phy - qcom,sm8150-qmp-ufs-phy - qcom,sm8150-qmp-usb3-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml index 33974ad10afe..217aa6c91893 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -14,9 +14,8 @@ properties: compatible: enum: - qcom,sc7180-qmp-usb3-dp-phy - - qcom,sc7180-qmp-usb3-phy - qcom,sdm845-qmp-usb3-dp-phy - - qcom,sdm845-qmp-usb3-phy + - qcom,sm8250-qmp-usb3-dp-phy reg: items: - description: Address and length of PHY's USB serdes block. diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index ee77c6458326..20203a8a9e41 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - qcom,usb-snps-hs-7nm-phy + - qcom,sc7280-usb-hs-phy - qcom,sm8150-usb-hs-phy - qcom,sm8250-usb-hs-phy - qcom,sm8350-usb-hs-phy diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index bbbd85501ada..5272b6f284ba 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -15,6 +15,7 @@ properties: enum: - ti,j721e-wiz-16g - ti,j721e-wiz-10g + - ti,am64-wiz-10g power-domains: maxItems: 1 @@ -42,6 +43,9 @@ properties: "#reset-cells": const: 1 + "#clock-cells": + const: 1 + ranges: true assigned-clocks: @@ -218,7 +222,7 @@ examples: }; serdes@5000000 { - compatible = "cdns,ti,sierra-phy-t0"; + compatible = "ti,sierra-phy-t0"; reg-names = "serdes"; reg = <0x5000000 0x10000>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml new file mode 100644 index 000000000000..08995a4f854b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6318 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Bindings for Broadcom's BCM6318 memory-mapped pin controller. + +properties: + compatible: + const: brcm,bcm6318-pinctrl + + reg: + maxItems: 2 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led, + ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led, + serial_led_data, serial_led_clk, inet_act_led, inet_fail_led, + dsl_led, post_fail_led, wlan_wps_led, usb_pwron, + usb_device_led, usb_active ] + + pins: + enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, + gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@18 { + compatible = "brcm,bcm6318-pinctrl"; + reg = <0x18 0x10>, <0x54 0x18>; + + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { + function = "ephy0_spd_led"; + pins = "gpio0"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { + function = "ephy1_spd_led"; + pins = "gpio1"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { + function = "ephy2_spd_led"; + pins = "gpio2"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { + function = "ephy3_spd_led"; + pins = "gpio3"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led-pins { + function = "ephy0_act_led"; + pins = "gpio4"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led-pins { + function = "ephy1_act_led"; + pins = "gpio5"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led-pins { + function = "ephy2_act_led"; + pins = "gpio6"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led-pins { + function = "ephy3_act_led"; + pins = "gpio7"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led-pins { + function = "inet_act_led"; + pins = "gpio8"; + }; + + pinctrl_inet_fail_led: inet_fail_led-pins { + function = "inet_fail_led"; + pins = "gpio9"; + }; + + pinctrl_dsl_led: dsl_led-pins { + function = "dsl_led"; + pins = "gpio10"; + }; + + pinctrl_post_fail_led: post_fail_led-pins { + function = "post_fail_led"; + pins = "gpio11"; + }; + + pinctrl_wlan_wps_led: wlan_wps_led-pins { + function = "wlan_wps_led"; + pins = "gpio12"; + }; + + pinctrl_usb_pwron: usb_pwron-pins { + function = "usb_pwron"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio13"; + }; + + pinctrl_usb_active: usb_active-pins { + function = "usb_active"; + pins = "gpio40"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml new file mode 100644 index 000000000000..58ffed44b3c4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM63268 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Bindings for Broadcom's BCM63268 memory-mapped pin controller. + +properties: + compatible: + const: brcm,bcm63268-pinctrl + + reg: + maxItems: 3 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5, + hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi, + vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data, + nand, gpio35_alt, dectpd, vdsl_phy_override_0, + vdsl_phy_override_1, vdsl_phy_override_2, + vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ] + + pins: + enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19, + gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35 + dectpd_grp, vdsl_phy_override_0_grp, + vdsl_phy_override_1_grp, vdsl_phy_override_2_grp, + vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@10 { + compatible = "brcm,bcm63268-pinctrl"; + reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio0"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio1"; + }; + }; + + pinctrl_hsspi_cs4: hsspi_cs4-pins { + function = "hsspi_cs4"; + pins = "gpio16"; + }; + + pinctrl_hsspi_cs5: hsspi_cs5-pins { + function = "hsspi_cs5"; + pins = "gpio17"; + }; + + pinctrl_hsspi_cs6: hsspi_cs6-pins { + function = "hsspi_cs6"; + pins = "gpio8"; + }; + + pinctrl_hsspi_cs7: hsspi_cs7-pins { + function = "hsspi_cs7"; + pins = "gpio9"; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio19"; + }; + }; + + pinctrl_vreq_clk: vreq_clk-pins { + function = "vreq_clk"; + pins = "gpio22"; + }; + + pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins { + function = "pcie_clkreq_b"; + pins = "gpio23"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio30"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio31"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + group = "nand_grp"; + }; + + pinctrl_gpio35_alt: gpio35_alt-pins { + function = "gpio35_alt"; + pin = "gpio35"; + }; + + pinctrl_dectpd: dectpd-pins { + function = "dectpd"; + group = "dectpd_grp"; + }; + + pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { + function = "vdsl_phy_override_0"; + group = "vdsl_phy_override_0_grp"; + }; + + pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { + function = "vdsl_phy_override_1"; + group = "vdsl_phy_override_1_grp"; + }; + + pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { + function = "vdsl_phy_override_2"; + group = "vdsl_phy_override_2_grp"; + }; + + pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { + function = "vdsl_phy_override_3"; + group = "vdsl_phy_override_3_grp"; + }; + + pinctrl_dsl_gpio8: dsl_gpio8-pins { + function = "dsl_gpio8"; + group = "dsl_gpio8"; + }; + + pinctrl_dsl_gpio9: dsl_gpio9-pins { + function = "dsl_gpio9"; + group = "dsl_gpio9"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml new file mode 100644 index 000000000000..0fd24f40afb1 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6328 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Bindings for Broadcom's BCM6328 memory-mapped pin controller. + +properties: + compatible: + const: brcm,bcm6328-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq, + led, ephy0_act_led, ephy1_act_led, ephy2_act_led, + ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ] + + pins: + enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19, + gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1, + usb_port1 ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@18 { + compatible = "brcm,bcm6328-pinctrl"; + reg = <0x18 0x10>; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led-pins { + function = "inet_act_led"; + pins = "gpio11"; + }; + + pinctrl_pcie_clkreq: pcie_clkreq-pins { + function = "pcie_clkreq"; + pins = "gpio16"; + }; + + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { + function = "led"; + pins = "gpio17"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { + function = "led"; + pins = "gpio18"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { + function = "led"; + pins = "gpio19"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { + function = "led"; + pins = "gpio20"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led-pins { + function = "ephy0_act_led"; + pins = "gpio25"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led-pins { + function = "ephy1_act_led"; + pins = "gpio26"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led-pins { + function = "ephy2_act_led"; + pins = "gpio27"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led-pins { + function = "ephy3_act_led"; + pins = "gpio28"; + }; + + pinctrl_hsspi_cs1: hsspi_cs1-pins { + function = "hsspi_cs1"; + pins = "hsspi_cs1"; + }; + + pinctrl_usb_port1_device: usb_port1_device-pins { + function = "usb_device_port"; + pins = "usb_port1"; + }; + + pinctrl_usb_port1_host: usb_port1_host-pins { + function = "usb_host_port"; + pins = "usb_port1"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml new file mode 100644 index 000000000000..0c3ce256aa78 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6358 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Bindings for Broadcom's BCM6358 memory-mapped pin controller. + +properties: + compatible: + const: brcm,bcm6358-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia, + pwm_syn_clk, sys_irq ] + + pins: + enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp, + led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@18 { + compatible = "brcm,bcm6358-pinctrl"; + reg = <0x18 0x4>; + + pinctrl_ebi_cs: ebi_cs-pins { + function = "ebi_cs"; + groups = "ebi_cs_grp"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + groups = "uart1_grp"; + }; + + pinctrl_serial_led: serial_led-pins { + function = "serial_led"; + groups = "serial_led_grp"; + }; + + pinctrl_legacy_led: legacy_led-pins { + function = "legacy_led"; + groups = "legacy_led_grp"; + }; + + pinctrl_led: led-pins { + function = "led"; + groups = "led_grp"; + }; + + pinctrl_spi_cs_23: spi_cs-pins { + function = "spi_cs"; + groups = "spi_cs_grp"; + }; + + pinctrl_utopia: utopia-pins { + function = "utopia"; + groups = "utopia_grp"; + }; + + pinctrl_pwm_syn_clk: pwm_syn_clk-pins { + function = "pwm_syn_clk"; + groups = "pwm_syn_clk_grp"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + groups = "sys_irq_grp"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml new file mode 100644 index 000000000000..6f68fee373bd --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6362 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Bindings for Broadcom's BCM6362 memory-mapped pin controller. + +properties: + compatible: + const: brcm,bcm6362-pinctrl + + reg: + maxItems: 2 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data, + robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1, + inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts, + uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso, + adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led, + ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1, + ext_irq2, ext_irq3, nand ] + + pins: + enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, + gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, + gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21, + gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@18 { + compatible = "brcm,bcm6362-pinctrl"; + reg = <0x18 0x10>, <0x38 0x4>; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio0"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + pins = "gpio1"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio2"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio3"; + }; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio4"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio5"; + }; + + pinctrl_robosw_led0: robosw_led0-pins { + function = "robosw_led0"; + pins = "gpio6"; + }; + + pinctrl_robosw_led1: robosw_led1-pins { + function = "robosw_led1"; + pins = "gpio7"; + }; + + pinctrl_inet_led: inet_led-pins { + function = "inet_led"; + pins = "gpio8"; + }; + + pinctrl_spi_cs2: spi_cs2-pins { + function = "spi_cs2"; + pins = "gpio9"; + }; + + pinctrl_spi_cs3: spi_cs3-pins { + function = "spi_cs3"; + pins = "gpio10"; + }; + + pinctrl_ntr_pulse: ntr_pulse-pins { + function = "ntr_pulse"; + pins = "gpio11"; + }; + + pinctrl_uart1_scts: uart1_scts-pins { + function = "uart1_scts"; + pins = "gpio12"; + }; + + pinctrl_uart1_srts: uart1_srts-pins { + function = "uart1_srts"; + pins = "gpio13"; + }; + + pinctrl_uart1: uart1-pins { + pinctrl_uart1_sdin: uart1_sdin-pins { + function = "uart1_sdin"; + pins = "gpio14"; + }; + + pinctrl_uart1_sdout: uart1_sdout-pins { + function = "uart1_sdout"; + pins = "gpio15"; + }; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio16"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio17"; + }; + + pinctrl_adsl_spi_clk: adsl_spi_clk-pins { + function = "adsl_spi_clk"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_cs: adsl_spi_cs-pins { + function = "adsl_spi_cs"; + pins = "gpio19"; + }; + }; + + pinctrl_ephy0_led: ephy0_led-pins { + function = "ephy0_led"; + pins = "gpio20"; + }; + + pinctrl_ephy1_led: ephy1_led-pins { + function = "ephy1_led"; + pins = "gpio21"; + }; + + pinctrl_ephy2_led: ephy2_led-pins { + function = "ephy2_led"; + pins = "gpio22"; + }; + + pinctrl_ephy3_led: ephy3_led-pins { + function = "ephy3_led"; + pins = "gpio23"; + }; + + pinctrl_ext_irq0: ext_irq0-pins { + function = "ext_irq0"; + pins = "gpio24"; + }; + + pinctrl_ext_irq1: ext_irq1-pins { + function = "ext_irq1"; + pins = "gpio25"; + }; + + pinctrl_ext_irq2: ext_irq2-pins { + function = "ext_irq2"; + pins = "gpio26"; + }; + + pinctrl_ext_irq3: ext_irq3-pins { + function = "ext_irq3"; + pins = "gpio27"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + group = "nand_grp"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml new file mode 100644 index 000000000000..f4168b9f4460 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml @@ -0,0 +1,217 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6368-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6368 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Bindings for Broadcom's BCM6368 memory-mapped pin controller. + +properties: + compatible: + const: brcm,bcm6368-pinctrl + + reg: + maxItems: 2 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ analog_afe_0, analog_afe_1, sys_irq, serial_led_data, + serial_led_clk, inet_led, ephy0_led, ephy1_led, ephy2_led, + ephy3_led, robosw_led_data, robosw_led_clk, robosw_led0, + robosw_led1, usb_device_led, pci_req1, pci_gnt1, pci_intb, + pci_req0, pci_gnt0, pcmcia_cd1, pcmcia_cd2, pcmcia_vs1, + pcmcia_vs2, ebi_cs2, ebi_cs3, spi_cs2, spi_cs3, spi_cs4, + spi_cs5, uart1 ] + + pins: + enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, + gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, + gpio16, gpio17, gpio18, gpio19, gpio20, gpio22, gpio23, + gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30, + gpio31, uart1_grp ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@18 { + compatible = "brcm,bcm6368-pinctrl"; + reg = <0x18 0x4>, <0x38 0x4>; + + pinctrl_analog_afe_0: analog_afe_0-pins { + function = "analog_afe_0"; + pins = "gpio0"; + }; + + pinctrl_analog_afe_1: analog_afe_1-pins { + function = "analog_afe_1"; + pins = "gpio1"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + pins = "gpio2"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio3"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio4"; + }; + }; + + pinctrl_inet_led: inet_led-pins { + function = "inet_led"; + pins = "gpio5"; + }; + + pinctrl_ephy0_led: ephy0_led-pins { + function = "ephy0_led"; + pins = "gpio6"; + }; + + pinctrl_ephy1_led: ephy1_led-pins { + function = "ephy1_led"; + pins = "gpio7"; + }; + + pinctrl_ephy2_led: ephy2_led-pins { + function = "ephy2_led"; + pins = "gpio8"; + }; + + pinctrl_ephy3_led: ephy3_led-pins { + function = "ephy3_led"; + pins = "gpio9"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio10"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio11"; + }; + + pinctrl_robosw_led0: robosw_led0-pins { + function = "robosw_led0"; + pins = "gpio12"; + }; + + pinctrl_robosw_led1: robosw_led1-pins { + function = "robosw_led1"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio14"; + }; + + pinctrl_pci: pci-pins { + pinctrl_pci_req1: pci_req1-pins { + function = "pci_req1"; + pins = "gpio16"; + }; + + pinctrl_pci_gnt1: pci_gnt1-pins { + function = "pci_gnt1"; + pins = "gpio17"; + }; + + pinctrl_pci_intb: pci_intb-pins { + function = "pci_intb"; + pins = "gpio18"; + }; + + pinctrl_pci_req0: pci_req0-pins { + function = "pci_req0"; + pins = "gpio19"; + }; + + pinctrl_pci_gnt0: pci_gnt0-pins { + function = "pci_gnt0"; + pins = "gpio20"; + }; + }; + + pinctrl_pcmcia: pcmcia-pins { + pinctrl_pcmcia_cd1: pcmcia_cd1-pins { + function = "pcmcia_cd1"; + pins = "gpio22"; + }; + + pinctrl_pcmcia_cd2: pcmcia_cd2-pins { + function = "pcmcia_cd2"; + pins = "gpio23"; + }; + + pinctrl_pcmcia_vs1: pcmcia_vs1-pins { + function = "pcmcia_vs1"; + pins = "gpio24"; + }; + + pinctrl_pcmcia_vs2: pcmcia_vs2-pins { + function = "pcmcia_vs2"; + pins = "gpio25"; + }; + }; + + pinctrl_ebi_cs2: ebi_cs2-pins { + function = "ebi_cs2"; + pins = "gpio26"; + }; + + pinctrl_ebi_cs3: ebi_cs3-pins { + function = "ebi_cs3"; + pins = "gpio27"; + }; + + pinctrl_spi_cs2: spi_cs2-pins { + function = "spi_cs2"; + pins = "gpio28"; + }; + + pinctrl_spi_cs3: spi_cs3-pins { + function = "spi_cs3"; + pins = "gpio29"; + }; + + pinctrl_spi_cs4: spi_cs4-pins { + function = "spi_cs4"; + pins = "gpio30"; + }; + + pinctrl_spi_cs5: spi_cs5-pins { + function = "spi_cs5"; + pins = "gpio31"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + group = "uart1_grp"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml index 44c04d11ae4c..a4846d78111c 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml @@ -17,10 +17,12 @@ description: > naming scheme "PxN" where x is a character identifying the GPIO port with which the pin is associated and N is an integer from 0 to 31 identifying the pin within that GPIO port. For example PA0 is the first pin in GPIO port A, - and PB31 is the last pin in GPIO port B. The JZ4740, the X1000 and the X1830 - contains 4 GPIO ports, PA to PD, for a total of 128 pins. The JZ4760, the - JZ4770 and the JZ4780 contains 6 GPIO ports, PA to PF, for a total of 192 - pins. + and PB31 is the last pin in GPIO port B. The JZ4730, the JZ4740, the JZ4725B, + the X1000 and the X1830 contains 4 GPIO ports, PA to PD, for a total of 128 + pins. The X2000 contains 5 GPIO ports, PA to PE, for a total of 160 pins. + The JZ4750, the JZ4755 the JZ4760, the JZ4770 and the JZ4780 contains 6 GPIO + ports, PA to PF, for a total of 192 pins. The JZ4775 contains 7 GPIO ports, + PA to PG, for a total of 224 pins. maintainers: - Paul Cercueil <paul@crapouillou.net> @@ -32,20 +34,28 @@ properties: compatible: oneOf: - enum: + - ingenic,jz4730-pinctrl - ingenic,jz4740-pinctrl - ingenic,jz4725b-pinctrl + - ingenic,jz4750-pinctrl + - ingenic,jz4755-pinctrl - ingenic,jz4760-pinctrl - ingenic,jz4770-pinctrl + - ingenic,jz4775-pinctrl - ingenic,jz4780-pinctrl - ingenic,x1000-pinctrl - ingenic,x1500-pinctrl - ingenic,x1830-pinctrl + - ingenic,x2000-pinctrl - items: - const: ingenic,jz4760b-pinctrl - const: ingenic,jz4760-pinctrl - items: - const: ingenic,x1000e-pinctrl - const: ingenic,x1000-pinctrl + - items: + - const: ingenic,x2000e-pinctrl + - const: ingenic,x2000-pinctrl reg: maxItems: 1 @@ -62,14 +72,19 @@ patternProperties: properties: compatible: enum: + - ingenic,jz4730-gpio - ingenic,jz4740-gpio - ingenic,jz4725b-gpio + - ingenic,jz4750-gpio + - ingenic,jz4755-gpio - ingenic,jz4760-gpio - ingenic,jz4770-gpio + - ingenic,jz4775-gpio - ingenic,jz4780-gpio - ingenic,x1000-gpio - ingenic,x1500-gpio - ingenic,x1830-gpio + - ingenic,x2000-gpio reg: items: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml new file mode 100644 index 000000000000..2f12ec59eee5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8195.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT8195 Pin Controller + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +description: | + The Mediatek's Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt8195-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: | + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + const: 2 + + gpio-ranges: + description: gpio valid number range. + maxItems: 1 + + reg: + description: | + Physical address base for gpio base registers. There are 8 GPIO + physical address base in mt8195. + maxItems: 8 + + reg-names: + description: | + Gpio base register names. + maxItems: 8 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: The interrupt outputs to sysirq. + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and + input schmitt. + An example of using macro: + pincontroller { + /* GPIO0 set as multifunction GPIO0 */ + gpio_pin { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + }; + /* GPIO8 set as multifunction SDA0 */ + i2c0_pin { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>; + }; + }; + $ref: "pinmux-node.yaml" + + properties: + pinmux: + description: | + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are defined + as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. + + drive-strength: + description: | + It can support some arguments which is from 0 to 7. It can only support + 2/4/6/8/10/12/14/16mA in mt8195. + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/mt8195-pinfunc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + pio: pinctrl@10005000 { + compatible = "mediatek,mt8195-pinctrl"; + reg = <0x10005000 0x1000>, + <0x11d10000 0x1000>, + <0x11d30000 0x1000>, + <0x11d40000 0x1000>, + <0x11e20000 0x1000>, + <0x11eb0000 0x1000>, + <0x11f40000 0x1000>, + <0x1000b000 0x1000>; + reg-names = "iocfg0", "iocfg_bm", "iocfg_bl", + "iocfg_br", "iocfg_lm", "iocfg_rb", + "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 144>; + interrupt-controller; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + + pio-pins { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + output-low; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 7648ab00f4e2..f6a9760558a6 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -27,8 +27,15 @@ PMIC's from Qualcomm. "qcom,pm660l-gpio" "qcom,pm8150-gpio" "qcom,pm8150b-gpio" + "qcom,pm8350-gpio" + "qcom,pm8350b-gpio" + "qcom,pm8350c-gpio" + "qcom,pmk8350-gpio" + "qcom,pmr735a-gpio" + "qcom,pmr735b-gpio" "qcom,pm6150-gpio" "qcom,pm6150l-gpio" + "qcom,pm8008-gpio" "qcom,pmx55-gpio" And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" @@ -109,8 +116,15 @@ to specify in a pin configuration subnode: and gpio8) gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7) gpio1-gpio12 for pm8150l (hole on gpio7) + gpio1-gpio10 for pm8350 + gpio1-gpio8 for pm8350b + gpio1-gpio9 for pm8350c + gpio1-gpio4 for pmk8350 + gpio1-gpio4 for pmr735a + gpio1-gpio4 for pmr735b gpio1-gpio10 for pm6150 gpio1-gpio12 for pm6150l + gpio1-gpio2 for pm8008 gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 and gpio11) diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index d3eae61a340d..84c4111293bd 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -33,6 +33,7 @@ Required properties for iomux controller: "rockchip,rk3328-pinctrl": for Rockchip RK3328 "rockchip,rk3368-pinctrl": for Rockchip RK3368 "rockchip,rk3399-pinctrl": for Rockchip RK3399 + "rockchip,rk3568-pinctrl": for Rockchip RK3568 - rockchip,grf: phandle referencing a syscon providing the "general register files" @@ -50,23 +51,7 @@ Deprecated properties for iomux controller: Use rockchip,grf and rockchip,pmu described above instead. Required properties for gpio sub nodes: - - compatible: "rockchip,gpio-bank" - - reg: register of the gpio bank (different than the iomux registerset) - - interrupts: base interrupt of the gpio bank in the interrupt controller - - clocks: clock that drives this bank - - gpio-controller: identifies the node as a gpio controller and pin bank. - - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See generic - GPIO binding documentation for description of particular cells. - - interrupt-controller: identifies the controller node as interrupt-parent. - - #interrupt-cells: the value of this property should be 2 and the interrupt - cells should use the standard two-cell scheme described in - bindings/interrupt-controller/interrupts.txt - -Deprecated properties for gpio sub nodes: - - compatible: "rockchip,rk3188-gpio-bank0" - - reg: second element: separate pull register for rk3188 bank0, use - rockchip,pmu described above instead +See rockchip,gpio-bank.yaml Required properties for pin configuration node: - rockchip,pins: 3 integers array, represents a group of pins mux and config @@ -127,43 +112,3 @@ uart2: serial@20064000 { pinctrl-names = "default"; pinctrl-0 = <&uart2_xfer>; }; - -Example for rk3188: - - pinctrl@20008000 { - compatible = "rockchip,rk3188-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmu>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio0: gpio0@2000a000 { - compatible = "rockchip,rk3188-gpio-bank0"; - reg = <0x2000a000 0x100>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 9>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio1@2003c000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2003c000 0x100>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 10>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - ... - - }; diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml new file mode 100644 index 000000000000..8ef0d07d35fe --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -0,0 +1,336 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP Pinctrl + +maintainers: + - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> + - Rajan Vaja <rajan.vaja@xilinx.com> + +description: | + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of the + phrase "pin configuration node". + + ZynqMP's pin configuration nodes act as a container for an arbitrary number of + subnodes. Each of these subnodes represents some desired configuration for a + pin, a group, or a list of pins or groups. This configuration can include the + mux function to select on those pin(s)/group(s), and various pin configuration + parameters, such as pull-up, slew rate, etc. + + Each configuration node can consist of multiple nodes describing the pinmux and + pinconf options. Those nodes can be pinmux nodes or pinconf nodes. + + The name of each subnode is not important; all subnodes should be enumerated + and processed purely based on their content. + +properties: + compatible: + const: xlnx,zynqmp-pinctrl + +patternProperties: + '^(.*-)?(default|gpio)$': + type: object + patternProperties: + '^mux': + type: object + description: + Pinctrl node's client devices use subnodes for pin muxes, + which in turn use below standard properties. + $ref: pinmux-node.yaml# + + properties: + groups: + description: + List of groups to select (either this or "pins" must be + specified), available groups for this subnode. + items: + enum: [ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp, + ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp, + gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp, + mdio1_1_grp, mdio2_0_grp, mdio3_0_grp, + qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp, + spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp, + spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp, + spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp, + spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp, + spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp, + spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp, + spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp, + spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp, + spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp, + spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp, + spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp, + spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp, + spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp, + spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp, + spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp, + spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp, + sdio0_0_grp, sdio0_1_grp, sdio0_2_grp, + sdio0_3_grp, sdio0_4_grp, sdio0_5_grp, + sdio0_6_grp, sdio0_7_grp, sdio0_8_grp, + sdio0_9_grp, sdio0_10_grp, sdio0_11_grp, + sdio0_12_grp, sdio0_13_grp, sdio0_14_grp, + sdio0_15_grp, sdio0_16_grp, sdio0_17_grp, + sdio0_18_grp, sdio0_19_grp, sdio0_20_grp, + sdio0_21_grp, sdio0_22_grp, sdio0_23_grp, + sdio0_24_grp, sdio0_25_grp, sdio0_26_grp, + sdio0_27_grp, sdio0_28_grp, sdio0_29_grp, + sdio0_30_grp, sdio0_31_grp, sdio0_32_grp, + sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp, + sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp, + sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp, + sdio1_0_grp, sdio1_1_grp, sdio1_2_grp, + sdio1_3_grp, sdio1_4_grp, sdio1_5_grp, + sdio1_6_grp, sdio1_7_grp, sdio1_8_grp, + sdio1_9_grp, sdio1_10_grp, sdio1_11_grp, + sdio1_12_grp, sdio1_13_grp, sdio1_14_grp, + sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp, + sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp, + sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp, + nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp, + nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp, + can0_1_grp, can0_2_grp, can0_3_grp, + can0_4_grp, can0_5_grp, can0_6_grp, + can0_7_grp, can0_8_grp, can0_9_grp, + can0_10_grp, can0_11_grp, can0_12_grp, + can0_13_grp, can0_14_grp, can0_15_grp, + can0_16_grp, can0_17_grp, can0_18_grp, + can1_0_grp, can1_1_grp, can1_2_grp, + can1_3_grp, can1_4_grp, can1_5_grp, + can1_6_grp, can1_7_grp, can1_8_grp, + can1_9_grp, can1_10_grp, can1_11_grp, + can1_12_grp, can1_13_grp, can1_14_grp, + can1_15_grp, can1_16_grp, can1_17_grp, + can1_18_grp, can1_19_grp, uart0_0_grp, + uart0_1_grp, uart0_2_grp, uart0_3_grp, + uart0_4_grp, uart0_5_grp, uart0_6_grp, + uart0_7_grp, uart0_8_grp, uart0_9_grp, + uart0_10_grp, uart0_11_grp, uart0_12_grp, + uart0_13_grp, uart0_14_grp, uart0_15_grp, + uart0_16_grp, uart0_17_grp, uart0_18_grp, + uart1_0_grp, uart1_1_grp, uart1_2_grp, + uart1_3_grp, uart1_4_grp, uart1_5_grp, + uart1_6_grp, uart1_7_grp, uart1_8_grp, + uart1_9_grp, uart1_10_grp, uart1_11_grp, + uart1_12_grp, uart1_13_grp, uart1_14_grp, + uart1_15_grp, uart1_16_grp, uart1_17_grp, + uart1_18_grp, i2c0_0_grp, i2c0_1_grp, + i2c0_2_grp, i2c0_3_grp, i2c0_4_grp, + i2c0_5_grp, i2c0_6_grp, i2c0_7_grp, + i2c0_8_grp, i2c0_9_grp, i2c0_10_grp, + i2c0_11_grp, i2c0_12_grp, i2c0_13_grp, + i2c0_14_grp, i2c0_15_grp, i2c0_16_grp, + i2c0_17_grp, i2c0_18_grp, i2c1_0_grp, + i2c1_1_grp, i2c1_2_grp, i2c1_3_grp, + i2c1_4_grp, i2c1_5_grp, i2c1_6_grp, + i2c1_7_grp, i2c1_8_grp, i2c1_9_grp, + i2c1_10_grp, i2c1_11_grp, i2c1_12_grp, + i2c1_13_grp, i2c1_14_grp, i2c1_15_grp, + i2c1_16_grp, i2c1_17_grp, i2c1_18_grp, + i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp, + ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp, + ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp, + ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp, + ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp, + ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp, + ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp, + ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp, + ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp, + ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp, + ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp, + ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp, + ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp, + ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp, + ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp, + ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp, + ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp, + ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp, + ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp, + ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp, + ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp, + ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp, + ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp, + ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp, + ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp, + swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp, + swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp, + swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp, + swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp, + swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp, + swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp, + swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp, + swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp, + swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp, + swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp, + swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp, + swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp, + swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp, + swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp, + swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp, + swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp, + swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp, + gpio0_1_grp, gpio0_2_grp, gpio0_3_grp, + gpio0_4_grp, gpio0_5_grp, gpio0_6_grp, + gpio0_7_grp, gpio0_8_grp, gpio0_9_grp, + gpio0_10_grp, gpio0_11_grp, gpio0_12_grp, + gpio0_13_grp, gpio0_14_grp, gpio0_15_grp, + gpio0_16_grp, gpio0_17_grp, gpio0_18_grp, + gpio0_19_grp, gpio0_20_grp, gpio0_21_grp, + gpio0_22_grp, gpio0_23_grp, gpio0_24_grp, + gpio0_25_grp, gpio0_26_grp, gpio0_27_grp, + gpio0_28_grp, gpio0_29_grp, gpio0_30_grp, + gpio0_31_grp, gpio0_32_grp, gpio0_33_grp, + gpio0_34_grp, gpio0_35_grp, gpio0_36_grp, + gpio0_37_grp, gpio0_38_grp, gpio0_39_grp, + gpio0_40_grp, gpio0_41_grp, gpio0_42_grp, + gpio0_43_grp, gpio0_44_grp, gpio0_45_grp, + gpio0_46_grp, gpio0_47_grp, gpio0_48_grp, + gpio0_49_grp, gpio0_50_grp, gpio0_51_grp, + gpio0_52_grp, gpio0_53_grp, gpio0_54_grp, + gpio0_55_grp, gpio0_56_grp, gpio0_57_grp, + gpio0_58_grp, gpio0_59_grp, gpio0_60_grp, + gpio0_61_grp, gpio0_62_grp, gpio0_63_grp, + gpio0_64_grp, gpio0_65_grp, gpio0_66_grp, + gpio0_67_grp, gpio0_68_grp, gpio0_69_grp, + gpio0_70_grp, gpio0_71_grp, gpio0_72_grp, + gpio0_73_grp, gpio0_74_grp, gpio0_75_grp, + gpio0_76_grp, gpio0_77_grp, usb0_0_grp, + usb1_0_grp, pmu0_0_grp, pmu0_1_grp, + pmu0_2_grp, pmu0_3_grp, pmu0_4_grp, + pmu0_5_grp, pmu0_6_grp, pmu0_7_grp, + pmu0_8_grp, pmu0_9_grp, pmu0_10_grp, + pmu0_11_grp, pcie0_0_grp, pcie0_1_grp, + pcie0_2_grp, pcie0_3_grp, pcie0_4_grp, + pcie0_5_grp, pcie0_6_grp, pcie0_7_grp, + csu0_0_grp, csu0_1_grp, csu0_2_grp, + csu0_3_grp, csu0_4_grp, csu0_5_grp, + csu0_6_grp, csu0_7_grp, csu0_8_grp, + csu0_9_grp, csu0_10_grp, csu0_11_grp, + dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp, + dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp, + pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp, + pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp, + trace0_1_grp, trace0_clk_1_grp, trace0_2_grp, + trace0_clk_2_grp, testscan0_0_grp] + maxItems: 78 + + function: + description: + Specify the alternative function to be configured for the + given pin groups. + enum: [ethernet0, ethernet1, ethernet2, ethernet3, gemtsu0, usb0, usb1, mdio0, + mdio1, mdio2, mdio3, qspi0, qspi_fbclk, qspi_ss, spi0, spi1, spi0_ss, + spi1_ss, sdio0, sdio0_pc, sdio0_wp, sdio0_cd, sdio1, sdio1_pc, sdio1_wp, + sdio1_cd, nand0, nand0_ce, nand0_rb, nand0_dqs, can0, can1, uart0, uart1, + i2c0, i2c1, ttc0_clk, ttc0_wav, ttc1_clk, ttc1_wav, ttc2_clk, ttc2_wav, + ttc3_clk, ttc3_wav, swdt0_clk, swdt0_rst, swdt1_clk, swdt1_rst, gpio0, pmu0, + pcie0, csu0, dpaux0, pjtag0, trace0, trace0_clk, testscan0] + + required: + - groups + - function + + additionalProperties: false + + '^conf': + type: object + description: + Pinctrl node's client devices use subnodes for pin configurations, + which in turn use the standard properties below. + $ref: pincfg-node.yaml# + + properties: + groups: + description: + List of pin groups as mentioned above. + + pins: + description: + List of pin names to select in this subnode. + items: + pattern: '^MIO([0-9]|[1-6][0-9]|7[0-7])$' + maxItems: 78 + + bias-pull-up: true + + bias-pull-down: true + + bias-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + bias-high-impedance: true + + low-power-enable: true + + low-power-disable: true + + slew-rate: + enum: [0, 1] + + drive-strength: + description: + Selects the drive strength for MIO pins, in mA. + enum: [2, 4, 8, 12] + + power-source: + enum: [0, 1] + + oneOf: + - required: [ groups ] + - required: [ pins ] + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-zynqmp.h> + zynqmp_firmware: zynqmp-firmware { + pinctrl0: pinctrl { + compatible = "xlnx,zynqmp-pinctrl"; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart0_4_grp", "uart0_5_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO18"; + bias-pull-up; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + input-schmitt-disable; + }; + }; + }; + }; + + uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; + }; + +... diff --git a/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml index 40b08d83c80b..f8e7ddbd2705 100644 --- a/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml +++ b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - brcm,bcm4908-pmb + - brcm,bcm63138-pmb reg: description: register space of one or more buses diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index 1ea21acbbd55..ff21bfef8204 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -25,10 +25,12 @@ properties: - qcom,qcs404-rpmpd - qcom,sdm660-rpmpd - qcom,sc7180-rpmhpd + - qcom,sc7280-rpmhpd - qcom,sdm845-rpmhpd - qcom,sdx55-rpmhpd - qcom,sm8150-rpmhpd - qcom,sm8250-rpmhpd + - qcom,sm8350-rpmhpd '#power-domain-cells': const: 1 diff --git a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt index cd2d7f58a9d7..38e54b3fd9f3 100644 --- a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt @@ -17,6 +17,9 @@ Optional properties: chip's trigger line. If this property is not set, the trigger function is ignored and the chip is kept alive until an explicit kill signal is received +- trigger-delay-ms The number of milliseconds to wait after trigger line + assertion before executing shut down procedure. + The default is 2500ms. Example: @@ -24,6 +27,7 @@ ltc2952 { compatible = "lltc,ltc2952"; trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + trigger-delay-ms = <2000>; watchdog-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; kill-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; }; diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt b/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt deleted file mode 100644 index f181e46d8e07..000000000000 --- a/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt +++ /dev/null @@ -1,16 +0,0 @@ -=== AB8500 Battery Temperature Monitor Driver === - -The properties below describes the node for btemp driver. - -Required Properties: -- compatible = Shall be: "stericsson,ab8500-btemp" -- battery = Shall be battery specific information - - Example: - ab8500_btemp { - compatible = "stericsson,ab8500-btemp"; - battery = <&ab8500_battery>; - }; - -For information on battery specific node, Ref: -Documentation/devicetree/bindings/power/supply/ab8500/fg.txt diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt b/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt deleted file mode 100644 index 56636f927203..000000000000 --- a/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt +++ /dev/null @@ -1,16 +0,0 @@ -=== AB8500 Charging Algorithm Driver === - -The properties below describes the node for chargalg driver. - -Required Properties: -- compatible = Shall be: "stericsson,ab8500-chargalg" -- battery = Shall be battery specific information - -Example: -ab8500_chargalg { - compatible = "stericsson,ab8500-chargalg"; - battery = <&ab8500_battery>; -}; - -For information on battery specific node, Ref: -Documentation/devicetree/bindings/power/supply/ab8500/fg.txt diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt b/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt deleted file mode 100644 index 24ada03e07b4..000000000000 --- a/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt +++ /dev/null @@ -1,25 +0,0 @@ -=== AB8500 Charger Driver === - -Required Properties: -- compatible = Shall be "stericsson,ab8500-charger" -- battery = Shall be battery specific information - Example: - ab8500_charger { - compatible = "stericsson,ab8500-charger"; - battery = <&ab8500_battery>; - }; - -- vddadc-supply: Supply for USB and Main charger - Example: - ab8500-charger { - vddadc-supply = <&ab8500_ldo_tvout_reg>; - } -- autopower_cfg: - Boolean value depicting the presence of 'automatic poweron after powerloss' - Example: - ab8500-charger { - autopower_cfg; - }; - -For information on battery specific node, Ref: -Documentation/devicetree/bindings/power/supply/ab8500/fg.txt diff --git a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt deleted file mode 100644 index cb737a9e1f16..000000000000 --- a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt +++ /dev/null @@ -1,44 +0,0 @@ -Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device - -Required properties: - - compatible: "active-semi,act8945a-charger". - - active-semi,chglev-gpios: charge current level phandle with args - as described in ../gpio/gpio.txt. - - active-semi,lbo-gpios: specify the low battery voltage detect phandle - with args as as described in ../gpio/gpio.txt. - - interrupts: <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. - -Optional properties: - - active-semi,input-voltage-threshold-microvolt: unit: mV; - Specifies the charger's input over-voltage threshold value; - The value can be: 6600, 7000, 7500, 8000; default: 6600 - - active-semi,precondition-timeout: unit: minutes; - Specifies the charger's PRECONDITION safety timer setting value; - The value can be: 40, 60, 80, 0; If 0, it means to disable this timer; - default: 40. - - active-semi,total-timeout: unit: hours; - Specifies the charger's total safety timer setting value; - The value can be: 3, 4, 5, 0; If 0, it means to disable this timer; - default: 3. - -Example: - pmic@5b { - compatible = "active-semi,act8945a"; - reg = <0x5b>; - - charger { - compatible = "active-semi,act8945a-charger"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; - interrupt-parent = <&pioA>; - interrupts = <45 IRQ_TYPE_LEVEL_LOW>; - - active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; - active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; - active-semi,input-voltage-threshold-microvolt = <6600>; - active-semi,precondition-timeout = <40>; - active-semi,total-timeout = <3>; - }; - }; diff --git a/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml new file mode 100644 index 000000000000..3f74bc19415d --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Active-semi ACT8945A Charger Function + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: active-semi,act8945a-charger + + interrupts: + maxItems: 1 + + active-semi,chglev-gpios: + maxItems: 1 + description: charge current level GPIO + + active-semi,lbo-gpios: + maxItems: 1 + description: low battery voltage detect GPIO + + active-semi,input-voltage-threshold-microvolt: + description: | + Specifies the charger's input over-voltage threshold value. + Despite the name, specified values are in millivolt (mV). + Defaults to 6.6 V + enum: [ 6600, 7000, 7500, 8000 ] + + active-semi,precondition-timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the charger's PRECONDITION safety timer setting value in minutes. + If 0, it means to disable this timer. + Defaults to 40 minutes. + enum: [ 0, 40, 60, 80 ] + + active-semi,total-timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the charger's total safety timer setting value in hours; + If 0, it means to disable this timer; + Defaults to 3 hours. + enum: [ 0, 3, 4, 5 ] + +required: + - compatible + - interrupts + - active-semi,chglev-gpios + - active-semi,lbo-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + charger { + compatible = "active-semi,act8945a-charger"; + interrupt-parent = <&pioA>; + interrupts = <45 IRQ_TYPE_LEVEL_LOW>; + active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; + active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; + active-semi,input-voltage-threshold-microvolt = <6600>; + active-semi,precondition-timeout = <40>; + active-semi,total-timeout = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt deleted file mode 100644 index 7a1fb532abe5..000000000000 --- a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt +++ /dev/null @@ -1,25 +0,0 @@ -AXP20X and AXP22X PMICs' AC power supply - -Required Properties: - - compatible: One of: - "x-powers,axp202-ac-power-supply" - "x-powers,axp221-ac-power-supply" - "x-powers,axp813-ac-power-supply" - -This node is a subnode of the axp20x PMIC. - -The AXP20X can read the current current and voltage supplied by AC by -reading ADC channels from the AXP20X ADC. - -The AXP22X is only able to tell if an AC power supply is present and -usable. - -AXP813/AXP803 are able to limit current and supply voltage - -Example: - -&axp209 { - ac_power_supply: ac-power-supply { - compatible = "x-powers,axp202-ac-power-supply"; - }; -}; diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt b/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt deleted file mode 100644 index 41916f69902c..000000000000 --- a/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt +++ /dev/null @@ -1,20 +0,0 @@ -AXP20x and AXP22x battery power supply - -Required Properties: - - compatible, one of: - "x-powers,axp209-battery-power-supply" - "x-powers,axp221-battery-power-supply" - "x-powers,axp813-battery-power-supply" - -This node is a subnode of its respective PMIC DT node. - -The supported devices can read the battery voltage, charge and discharge -currents of the battery by reading ADC channels from the ADC. - -Example: - -&axp209 { - battery_power_supply: battery-power-supply { - compatible = "x-powers,axp209-battery-power-supply"; - } -}; diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt deleted file mode 100644 index b2d4968fde7d..000000000000 --- a/Documentation/devicetree/bindings/power/supply/axp20x_usb_power.txt +++ /dev/null @@ -1,41 +0,0 @@ -AXP20x USB power supply - -Required Properties: --compatible: One of: "x-powers,axp202-usb-power-supply" - "x-powers,axp221-usb-power-supply" - "x-powers,axp223-usb-power-supply" - "x-powers,axp813-usb-power-supply" - -The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight -variations such as the former being able to set the VBUS power supply max -current to 100mA, unlike the latter. - -This node is a subnode of the axp20x PMIC. - -Example: - -axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - - regulators { - x-powers,dcdc-freq = <1500>; - - vdd_cpu: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd-cpu"; - }; - - ... - }; - - usb-power-supply: usb-power-supply { - compatible = "x-powers,axp202-usb-power-supply"; - }; -}; diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt deleted file mode 100644 index a9f80cc49068..000000000000 --- a/Documentation/devicetree/bindings/power/supply/battery.txt +++ /dev/null @@ -1,3 +0,0 @@ -The contents of this file has been moved to battery.yaml - -Please note that not all charger drivers respect all of the properties. diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.txt b/Documentation/devicetree/bindings/power/supply/bq2415x.txt deleted file mode 100644 index d0327f0b59ad..000000000000 --- a/Documentation/devicetree/bindings/power/supply/bq2415x.txt +++ /dev/null @@ -1,47 +0,0 @@ -Binding for TI bq2415x Li-Ion Charger - -Required properties: -- compatible: Should contain one of the following: - * "ti,bq24150" - * "ti,bq24150" - * "ti,bq24150a" - * "ti,bq24151" - * "ti,bq24151a" - * "ti,bq24152" - * "ti,bq24153" - * "ti,bq24153a" - * "ti,bq24155" - * "ti,bq24156" - * "ti,bq24156a" - * "ti,bq24158" -- reg: integer, i2c address of the device. -- ti,current-limit: integer, initial maximum current charger can pull - from power supply in mA. -- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV. - The chip will use slow precharge if battery voltage - is below this value. -- ti,battery-regulation-voltage: integer, maximum charging voltage in mV. -- ti,charge-current: integer, maximum charging current in mA. -- ti,termination-current: integer, charge will be terminated when current in - constant-voltage phase drops below this value (in mA). -- ti,resistor-sense: integer, value of sensing resistor in milliohm. - -Optional properties: -- ti,usb-charger-detection: phandle to usb charger detection device. - (required for auto mode) - -Example from Nokia N900: - -bq24150a { - compatible = "ti,bq24150a"; - reg = <0x6b>; - - ti,current-limit = <100>; - ti,weak-battery-voltage = <3400>; - ti,battery-regulation-voltage = <4200>; - ti,charge-current = <650>; - ti,termination-current = <100>; - ti,resistor-sense = <68>; - - ti,usb-charger-detection = <&isp1704>; -}; diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml new file mode 100644 index 000000000000..f8461f06e6f4 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/bq2415x.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Binding for TI bq2415x Li-Ion Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - ti,bq24150 + - ti,bq24150 + - ti,bq24150a + - ti,bq24151 + - ti,bq24151a + - ti,bq24152 + - ti,bq24153 + - ti,bq24153a + - ti,bq24155 + - ti,bq24156 + - ti,bq24156a + - ti,bq24158 + + reg: + maxItems: 1 + + ti,current-limit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: initial maximum current charger can pull from power supply in mA. + + ti,weak-battery-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + weak battery voltage threshold in mV. + The chip will use slow precharge if battery voltage is below this value. + + ti,battery-regulation-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charging voltage in mV. + + ti,charge-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charging current in mA. + + ti,termination-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + charge will be terminated when current in constant-voltage phase drops + below this value (in mA). + + ti,resistor-sense: + $ref: /schemas/types.yaml#/definitions/uint32 + description: value of sensing resistor in milliohm. + + ti,usb-charger-detection: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to usb charger detection device (required for auto mode) + +required: + - compatible + - reg + - ti,current-limit + - ti,weak-battery-voltage + - ti,battery-regulation-voltage + - ti,charge-current + - ti,termination-current + - ti,resistor-sense + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@6b { + compatible = "ti,bq24150a"; + reg = <0x6b>; + + ti,current-limit = <100>; + ti,weak-battery-voltage = <3400>; + ti,battery-regulation-voltage = <4200>; + ti,charge-current = <650>; + ti,termination-current = <100>; + ti,resistor-sense = <68>; + + ti,usb-charger-detection = <&isp1704>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt deleted file mode 100644 index ffe2be408bb6..000000000000 --- a/Documentation/devicetree/bindings/power/supply/bq24190.txt +++ /dev/null @@ -1,61 +0,0 @@ -TI BQ24190 Li-Ion Battery Charger - -Required properties: -- compatible: contains one of the following: - * "ti,bq24190" - * "ti,bq24192" - * "ti,bq24192i" - * "ti,bq24196" -- reg: integer, I2C address of the charger. -- interrupts[-extended]: configuration for charger INT pin. - -Optional properties: -- monitored-battery: phandle of battery characteristics devicetree node - The charger uses the following battery properties: - + precharge-current-microamp: maximum charge current during precharge - phase (typically 20% of battery capacity). - + charge-term-current-microamp: a charge cycle terminates when the - battery voltage is above recharge threshold, and the current is below - this setting (typically 10% of battery capacity). - See also Documentation/devicetree/bindings/power/supply/battery.txt -- ti,system-minimum-microvolt: when power is connected and the battery is below - minimum system voltage, the system will be regulated above this setting. - -child nodes: -- usb-otg-vbus: - Usage: optional - Description: Regulator that is used to control the VBUS voltage direction for - either USB host mode or for charging on the OTG port. - -Notes: -- Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default - charge current on USB SDP ports, among other features). To simulate this on - boards that wire the pin to a GPIO, set a gpio-hog. - -Example: - - bat: battery { - compatible = "simple-battery"; - precharge-current-microamp = <256000>; - charge-term-current-microamp = <128000>; - // etc. - }; - - bq24190: charger@6a { - compatible = "ti,bq24190"; - reg = <0x6a>; - interrupts-extended = <&gpiochip 10 IRQ_TYPE_EDGE_FALLING>; - monitored-battery = <&bat>; - ti,system-minimum-microvolt = <3200000>; - - usb_otg_vbus: usb-otg-vbus { }; - }; - - &twl_gpio { - otg { - gpio-hog; - gpios = <6 0>; - output-high; - line-name = "otg-gpio"; - }; - }; diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml new file mode 100644 index 000000000000..0d7cbbdf808b --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/bq24190.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Binding for TI BQ2419x Li-Ion Battery Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - ti,bq24190 + - ti,bq24192 + - ti,bq24192i + - ti,bq24196 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + usb-otg-vbus: + type: object + description: | + Regulator that is used to control the VBUS voltage direction for + either USB host mode or for charging on the OTG port + + ti,system-minimum-microvolt: + description: | + when power is connected and the battery is below minimum system voltage, + the system will be regulated above this setting. + + omit-battery-class: + type: boolean + description: | + If this property is set, the operating system does not try to create a + battery device. + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + phandle to a "simple-battery" compatible node. + + This property must be a phandle to a node using the format described + in battery.yaml, with the following properties being required: + - precharge-current-microamp: maximum charge current during precharge phase + (typically 20% of battery capacity). + - charge-term-current-microamp: a charge cycle terminates when the battery voltage is + above recharge threshold, and the current is below this + setting (typically 10% of battery capacity). + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + bat: battery { + compatible = "simple-battery"; + precharge-current-microamp = <256000>; + charge-term-current-microamp = <128000>; + }; + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@6a { + compatible = "ti,bq24190"; + reg = <0x6a>; + interrupt-parent = <&gpiochip>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + monitored-battery = <&bat>; + ti,system-minimum-microvolt = <3200000>; + + usb_otg_vbus: usb-otg-vbus { }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.txt b/Documentation/devicetree/bindings/power/supply/bq24257.txt deleted file mode 100644 index f8f5a1685bb9..000000000000 --- a/Documentation/devicetree/bindings/power/supply/bq24257.txt +++ /dev/null @@ -1,62 +0,0 @@ -Binding for TI bq24250/bq24251/bq24257 Li-Ion Charger - -Required properties: -- compatible: Should contain one of the following: - * "ti,bq24250" - * "ti,bq24251" - * "ti,bq24257" -- reg: integer, i2c address of the device. -- interrupts: Interrupt mapping for GPIO IRQ (configure for both edges). Use in - conjunction with "interrupt-parent". -- ti,battery-regulation-voltage: integer, maximum charging voltage in uV. -- ti,charge-current: integer, maximum charging current in uA. -- ti,termination-current: integer, charge will be terminated when current in - constant-voltage phase drops below this value (in uA). - -Optional properties: -- pg-gpios: GPIO used for connecting the bq2425x device PG (Power Good) pin. - This pin is not available on all devices however it should be used if - possible as this is the recommended way to obtain the charger's input PG - state. If this pin is not specified a software-based approach for PG - detection is used. -- ti,current-limit: The maximum current to be drawn from the charger's input - (in uA). If this property is not specified, the input limit current is - set automatically using USB D+/D- signal based charger type detection. - If the hardware does not support the D+/D- based detection, a default - of 500,000 is used (=500mA) instead. -- ti,ovp-voltage: Configures the over voltage protection voltage (in uV). If - not specified a default of 6,5000,000 (=6.5V) is used. -- ti,in-dpm-voltage: Configures the threshold input voltage for the dynamic - power path management (in uV). If not specified a default of 4,360,000 - (=4.36V) is used. - -Example: - -bq24257 { - compatible = "ti,bq24257"; - reg = <0x6a>; - interrupt-parent = <&gpio1>; - interrupts = <16 IRQ_TYPE_EDGE_BOTH>; - - pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; - - ti,battery-regulation-voltage = <4200000>; - ti,charge-current = <1000000>; - ti,termination-current = <50000>; -}; - -Example: - -bq24250 { - compatible = "ti,bq24250"; - reg = <0x6a>; - interrupt-parent = <&gpio1>; - interrupts = <16 IRQ_TYPE_EDGE_BOTH>; - - ti,battery-regulation-voltage = <4200000>; - ti,charge-current = <500000>; - ti,termination-current = <50000>; - ti,current-limit = <900000>; - ti,ovp-voltage = <9500000>; - ti,in-dpm-voltage = <4440000>; -}; diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.yaml b/Documentation/devicetree/bindings/power/supply/bq24257.yaml new file mode 100644 index 000000000000..3a0f6cd9015a --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq24257.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/bq24257.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Binding for bq24250, bq24251 and bq24257 Li-Ion Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - ti,bq24250 + - ti,bq24251 + - ti,bq24257 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ti,battery-regulation-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charging voltage in uV + + ti,charge-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charging current in uA + + ti,termination-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + charge will be terminated when current in constant-voltage phase + drops below this value (in uA) + + pg-gpios: + description: | + GPIO used for connecting the bq2425x device PG (Power Good) pin. + This pin is not available on all devices however it should be used if + possible as this is the recommended way to obtain the charger's input PG + state. If this pin is not specified a software-based approach for PG + detection is used. + maxItems: 1 + + ti,current-limit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The maximum current to be drawn from the charger's input (in uA). + If this property is not specified, the input limit current is set + automatically using USB D+/D- signal based charger type detection. + If the hardware does not support the D+/D- based detection, a default + of 500,000 is used (=500mA) instead. + + ti,ovp-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Configures the over voltage protection voltage (in uV). + If not specified a default of 6,5000,000 (=6.5V) is used. + + ti,in-dpm-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Configures the threshold input voltage for the dynamic power path management (in uV). + If not specified a default of 4,360,000 (=4.36V) is used. + +required: + - compatible + - reg + - interrupts + - ti,battery-regulation-voltage + - ti,charge-current + - ti,termination-current + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@6a { + compatible = "ti,bq24257"; + reg = <0x6a>; + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_BOTH>; + + pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + + ti,battery-regulation-voltage = <4200000>; + ti,charge-current = <1000000>; + ti,termination-current = <50000>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@6a { + compatible = "ti,bq24250"; + reg = <0x6a>; + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_BOTH>; + + ti,battery-regulation-voltage = <4200000>; + ti,charge-current = <500000>; + ti,termination-current = <50000>; + ti,current-limit = <900000>; + ti,ovp-voltage = <9500000>; + ti,in-dpm-voltage = <4440000>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml new file mode 100644 index 000000000000..131be6782c4b --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/bq24735.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Binding for TI BQ24735 Li-Ion Battery Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: ti,bq24735 + + reg: + maxItems: 1 + + interrupts: + description: AC adapter plug event interrupt + maxItems: 1 + + ti,ac-detect-gpios: + maxItems: 1 + description: | + This GPIO is optionally used to read the AC adapter status. This is a Host GPIO + that is configured as an input and connected to the ACOK pin on the bq24735. + Note: for backwards compatibility reasons, the GPIO must be active on AC adapter + absence despite ACOK being active (high) on AC adapter presence. + + ti,charge-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Used to control and set the charging current. + This value must be between 128mA and 8.128A with a 64mA step resolution. + The POR value is 0x0000h. This number is in mA (e.g. 8192). + See spec for more information about the ChargeCurrent (0x14h) register. + + ti,charge-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Used to control and set the charging voltage. + This value must be between 1.024V and 19.2V with a 16mV step resolution. + The POR value is 0x0000h. This number is in mV (e.g. 19200). + See spec for more information about the ChargeVoltage (0x15h) register. + + ti,input-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Used to control and set the charger input current. + This value must be between 128mA and 8.064A with a 128mA step resolution. + The POR value is 0x1000h. This number is in mA (e.g. 8064). + See the spec for more information about the InputCurrent (0x3fh) register. + + ti,external-control: + type: boolean + description: | + Indicates that the charger is configured externally and that the host should not + attempt to enable/disable charging or set the charge voltage/current. + + poll-interval: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds). + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + ti,ac-detect-gpios = <&gpio 72 0x1>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml index 18b54783e11a..92ec7ed25668 100644 --- a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml @@ -39,7 +39,6 @@ properties: maxItems: 1 ti,watchdog-timeout-ms: - $ref: /schemas/types.yaml#/definitions/uint32 default: 0 description: | Watchdog timer in ms. 0 (default) disables the watchdog diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt deleted file mode 100644 index 805040c6fff9..000000000000 --- a/Documentation/devicetree/bindings/power/supply/bq25890.txt +++ /dev/null @@ -1,60 +0,0 @@ -Binding for TI bq25890 Li-Ion Charger - -This driver will support the bq25892, the bq25896 and the bq25890. There are -other ICs in the same family but those have not been tested. - -Required properties: -- compatible: Should contain one of the following: - * "ti,bq25890" - * "ti,bq25892" - * "ti,bq25895" - * "ti,bq25896" -- reg: integer, i2c address of the device. -- interrupts: interrupt line; -- ti,battery-regulation-voltage: integer, maximum charging voltage (in uV); -- ti,charge-current: integer, maximum charging current (in uA); -- ti,termination-current: integer, charge will be terminated when current in - constant-voltage phase drops below this value (in uA); -- ti,precharge-current: integer, maximum charge current during precharge - phase (in uA); -- ti,minimum-sys-voltage: integer, when battery is charging and it is below - minimum system voltage, the system will be regulated above - minimum-sys-voltage setting (in uV); -- ti,boost-voltage: integer, VBUS voltage level in boost mode (in uV); -- ti,boost-max-current: integer, maximum allowed current draw in boost mode - (in uA). - -Optional properties: -- ti,boost-low-freq: boolean, if present boost mode frequency will be 500kHz, - otherwise 1.5MHz; -- ti,use-ilim-pin: boolean, if present the ILIM resistor will be used and the - input current will be the lower between the resistor setting and the IINLIM - register setting; -- ti,thermal-regulation-threshold: integer, temperature above which the charge - current is lowered, to avoid overheating (in degrees Celsius). If omitted, - the default setting will be used (120 degrees); -- ti,ibatcomp-micro-ohms: integer, value of a resistor in series with - the battery; -- ti,ibatcomp-clamp-microvolt: integer, maximum charging voltage adjustment due - to expected voltage drop on in-series resistor; - -Example: - -bq25890 { - compatible = "ti,bq25890"; - reg = <0x6a>; - - interrupt-parent = <&gpio1>; - interrupts = <16 IRQ_TYPE_EDGE_FALLING>; - - ti,battery-regulation-voltage = <4200000>; - ti,charge-current = <1000000>; - ti,termination-current = <50000>; - ti,precharge-current = <128000>; - ti,minimum-sys-voltage = <3600000>; - ti,boost-voltage = <5000000>; - ti,boost-max-current = <1000000>; - - ti,use-ilim-pin; - ti,thermal-regulation-threshold = <120>; -}; diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.yaml b/Documentation/devicetree/bindings/power/supply/bq25890.yaml new file mode 100644 index 000000000000..bf823b615439 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq25890.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/bq25890.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Binding for bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - ti,bq25890 + - ti,bq25892 + - ti,bq25895 + - ti,bq25896 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ti,battery-regulation-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charging voltage (in uV) + + ti,charge-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charging current (in uA) + + ti,termination-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + charge will be terminated when current in constant-voltage phase + drops below this value (in uA) + + ti,precharge-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charge current during precharge phase (in uA) + + ti,minimum-sys-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + when battery is charging and it is below minimum system voltage, + the system will be regulated above minimum-sys-voltage setting (in uV) + + ti,boost-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: VBUS voltage level in boost mode (in uV) + + ti,boost-max-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum allowed current draw in boost mode (in uA) + + ti,boost-low-freq: + description: boost mode frequency will be 500kHz, otherwise 1.5MHz + type: boolean + + ti,use-ilim-pin: + description: | + ILIM resistor will be used and the input current will be the lower + between the resistor setting and the IINLIM register setting + type: boolean + + ti,thermal-regulation-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + temperature above which the charge current is lowered, to avoid overheating + (in degrees Celsius). If omitted, the default setting will be used (120 degrees) + + ti,ibatcomp-micro-ohms: + description: value of a resistor in series with the battery (in Micro Ohms) + + ti,ibatcomp-clamp-microvolt: + description: max. charging voltage adjustment due to expected voltage drop on in-series resistor + +required: + - compatible + - reg + - interrupts + - ti,battery-regulation-voltage + - ti,charge-current + - ti,termination-current + - ti,precharge-current + - ti,minimum-sys-voltage + - ti,boost-voltage + - ti,boost-max-current + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@6a { + compatible = "ti,bq25890"; + reg = <0x6a>; + + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + + ti,battery-regulation-voltage = <4200000>; + ti,charge-current = <1000000>; + ti,termination-current = <50000>; + ti,precharge-current = <128000>; + ti,minimum-sys-voltage = <3600000>; + ti,boost-voltage = <5000000>; + ti,boost-max-current = <1000000>; + + ti,use-ilim-pin; + ti,thermal-regulation-threshold = <120>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml index 45beefccf31a..6af41da3e055 100644 --- a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml @@ -52,6 +52,7 @@ properties: - ti,bq27z561 - ti,bq28z610 - ti,bq34z100 + - ti,bq78z100 reg: maxItems: 1 @@ -65,7 +66,7 @@ properties: - charge-full-design-microamp-hours - voltage-min-design-microvolt Both or neither of the *-full-design-*-hours properties must be set. - See Documentation/devicetree/bindings/power/supply/battery.txt + See Documentation/devicetree/bindings/power/supply/battery.yaml power-supplies: true diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-battery.txt b/Documentation/devicetree/bindings/power/supply/cpcap-battery.txt deleted file mode 100644 index a04efa22da01..000000000000 --- a/Documentation/devicetree/bindings/power/supply/cpcap-battery.txt +++ /dev/null @@ -1,31 +0,0 @@ -Motorola CPCAP PMIC battery driver binding - -Required properties: -- compatible: Shall be "motorola,cpcap-battery" -- interrupts: Interrupt specifier for each name in interrupt-names -- interrupt-names: Should contain the following entries: - "lowbph", "lowbpl", "chrgcurr1", "battdetb" -- io-channels: IIO ADC channel specifier for each name in io-channel-names -- io-channel-names: Should contain the following entries: - "battdetb", "battp", "chg_isense", "batti" -- power-supplies: List of phandles for power-supplying devices, as - described in power_supply.txt. Typically a reference - to cpcap_charger. - -Example: - -cpcap_battery: battery { - compatible = "motorola,cpcap-battery"; - interrupts-extended = < - &cpcap 5 0 &cpcap 3 0 - &cpcap 20 0 &cpcap 54 0 - >; - interrupt-names = - "lowbph", "lowbpl", - "chrgcurr1", "battdetb"; - io-channels = <&cpcap_adc 0 &cpcap_adc 1 - &cpcap_adc 5 &cpcap_adc 6>; - io-channel-names = "battdetb", "battp", - "chg_isense", "batti"; - power-supplies = <&cpcap_charger>; -}; diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml new file mode 100644 index 000000000000..7153fd4ce55f --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/cpcap-battery.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Motorola CPCAP PMIC battery + +maintainers: + - Tony Lindgren <tony@atomide.com> + - Sebastian Reichel <sre@kernel.org> + +description: | + Motorola CPCAP is a PMIC found in some mobile phones, e.g. + the Droid 4. This binding describes its battery fuel gauge + sub-function. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: motorola,cpcap-battery + + interrupts: + items: + - description: eol interrupt + - description: low battery percentage interrupt + - description: critical battery percentage interrupt + - description: charger detect interrupt + - description: battery detect interrupt + - description: coulomb counter calibration interrupt + + interrupt-names: + items: + - const: eol + - const: lowbph + - const: lowbpl + - const: chrgcurr1 + - const: battdetb + - const: cccal + + io-channels: + items: + - description: battery temperature + - description: battery voltage + - description: battery charge current + - description: battery current + + io-channel-names: + items: + - const: battdetb + - const: battp + - const: chg_isense + - const: batti + + power-supplies: true + +required: + - compatible + - interrupts + - interrupt-names + - io-channels + - io-channel-names + - power-supplies + +additionalProperties: false + +examples: + - | + cpcap { + battery { + compatible = "motorola,cpcap-battery"; + interrupts-extended = + <&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>, + <&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>; + interrupt-names = + "eol", "lowbph", "lowbpl", + "chrgcurr1", "battdetb", "cccal"; + io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>, + <&cpcap_adc 5>, <&cpcap_adc 6>; + io-channel-names = "battdetb", "battp", + "chg_isense", "batti"; + power-supplies = <&cpcap_charger>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt deleted file mode 100644 index 6048f636783f..000000000000 --- a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt +++ /dev/null @@ -1,40 +0,0 @@ -Motorola CPCAP PMIC battery charger binding - -Required properties: -- compatible: Shall be "motorola,mapphone-cpcap-charger" -- interrupts: Interrupt specifier for each name in interrupt-names -- interrupt-names: Should contain the following entries: - "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", - "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", - "battdetb" -- io-channels: IIO ADC channel specifier for each name in io-channel-names -- io-channel-names: Should contain the following entries: - "battdetb", "battp", "vbus", "chg_isense", "batti" - -Optional properties: -- mode-gpios: Optionally CPCAP charger can have a companion wireless - charge controller that is controlled with two GPIOs - that are active low. - -Example: - -cpcap_charger: charger { - compatible = "motorola,mapphone-cpcap-charger"; - interrupts-extended = < - &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 - &cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0 - &cpcap 54 0 - >; - interrupt-names = - "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", - "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", - "battdetb"; - mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW - &gpio3 23 GPIO_ACTIVE_LOW>; - io-channels = <&cpcap_adc 0 &cpcap_adc 1 - &cpcap_adc 2 &cpcap_adc 5 - &cpcap_adc 6>; - io-channel-names = "battdetb", "battp", - "vbus", "chg_isense", - "batti"; -}; diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml new file mode 100644 index 000000000000..cb6353683d7b --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/cpcap-charger.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Motorola CPCAP PMIC charger + +maintainers: + - Tony Lindgren <tony@atomide.com> + - Sebastian Reichel <sre@kernel.org> + +description: | + Motorola CPCAP is a PMIC found in some mobile phones, e.g. + the Droid 4. This binding describes its battery charger + sub-function. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: motorola,mapphone-cpcap-charger + + interrupts: + items: + - description: charger detection interrupt + - description: reverse charge interrupt + - description: SE1 charger detection interrupt + - description: SE0 charger detection interrupt + - description: reverse mode interrupt + - description: charge current 2 interrupt + - description: charge current 1 interrupt + - description: VBUS valid interrupt + - description: battery detect interrupt + + interrupt-names: + items: + - const: chrg_det + - const: rvrs_chrg + - const: chrg_se1b + - const: se0conn + - const: rvrs_mode + - const: chrgcurr2 + - const: chrgcurr1 + - const: vbusvld + - const: battdetb + + io-channels: + items: + - description: battery temperature + - description: battery voltage + - description: VBUS voltage + - description: battery charge current + - description: battery current + + io-channel-names: + items: + - const: battdetb + - const: battp + - const: vbus + - const: chg_isense + - const: batti + + mode-gpios: + description: | + Optionally CPCAP charger can have a companion wireless + charge controller that is controlled with two GPIOs + that are active low. + minItems: 2 + maxItems: 2 + +required: + - compatible + - interrupts + - interrupt-names + - io-channels + - io-channel-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + cpcap { + charger { + compatible = "motorola,mapphone-cpcap-charger"; + interrupts-extended = + <&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>, <&cpcap 28 0>, + <&cpcap 22 0>, <&cpcap 21 0>, <&cpcap 20 0>, <&cpcap 19 0>, + <&cpcap 54 0>; + interrupt-names = + "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", + "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", + "battdetb"; + mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>, + <&gpio3 23 GPIO_ACTIVE_LOW>; + io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>, + <&cpcap_adc 2>, <&cpcap_adc 5>, + <&cpcap_adc 6>; + io-channel-names = "battdetb", "battp", + "vbus", "chg_isense", + "batti"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml index 5fcdf5801536..c73abb2ff513 100644 --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -61,7 +61,7 @@ examples: #size-cells = <0>; cw2015@62 { - compatible = "cellwise,cw201x"; + compatible = "cellwise,cw2015"; reg = <0x62>; cellwise,battery-profile = /bits/ 8 < 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 diff --git a/Documentation/devicetree/bindings/power/supply/da9150-charger.txt b/Documentation/devicetree/bindings/power/supply/da9150-charger.txt deleted file mode 100644 index f3906663c454..000000000000 --- a/Documentation/devicetree/bindings/power/supply/da9150-charger.txt +++ /dev/null @@ -1,26 +0,0 @@ -Dialog Semiconductor DA9150 Charger Power Supply bindings - -Required properties: -- compatible: "dlg,da9150-charger" for DA9150 Charger Power Supply - -Optional properties: -- io-channels: List of phandle and IIO specifier pairs -- io-channel-names: List of channel names used by charger - ["CHAN_IBUS", "CHAN_VBUS", "CHAN_TJUNC", "CHAN_VBAT"] - (See Documentation/devicetree/bindings/iio/iio-bindings.txt for further info) - - -Example: - - da9150-charger { - compatible = "dlg,da9150-charger"; - - io-channels = <&gpadc 0>, - <&gpadc 2>, - <&gpadc 8>, - <&gpadc 5>; - io-channel-names = "CHAN_IBUS", - "CHAN_VBUS", - "CHAN_TJUNC", - "CHAN_VBAT"; - }; diff --git a/Documentation/devicetree/bindings/power/supply/da9150-fg.txt b/Documentation/devicetree/bindings/power/supply/da9150-fg.txt deleted file mode 100644 index 00236fe3ea31..000000000000 --- a/Documentation/devicetree/bindings/power/supply/da9150-fg.txt +++ /dev/null @@ -1,23 +0,0 @@ -Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings - -Required properties: -- compatible: "dlg,da9150-fuel-gauge" for DA9150 Fuel-Gauge Power Supply - -Optional properties: -- dlg,update-interval: Interval time (milliseconds) between battery level checks. -- dlg,warn-soc-level: Battery discharge level (%) where warning event raised. - [1 - 100] -- dlg,crit-soc-level: Battery discharge level (%) where critical event raised. - This value should be lower than the warning level. - [1 - 100] - - -Example: - - fuel-gauge { - compatible = "dlg,da9150-fuel-gauge"; - - dlg,update-interval = <10000>; - dlg,warn-soc-level = /bits/ 8 <15>; - dlg,crit-soc-level = /bits/ 8 <5>; - }; diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml new file mode 100644 index 000000000000..96336b05d76d --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Dialog Semiconductor DA9150 Charger Power Supply bindings + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: dlg,da9150-charger + + io-channels: + items: + - description: ADC channel for current + - description: ADC channel for bus voltage + - description: ADC channel for junction temperature + - description: ADC channel for battery voltage + + io-channel-names: + items: + - const: CHAN_IBUS + - const: CHAN_VBUS + - const: CHAN_TJUNC + - const: CHAN_VBAT + +required: + - compatible + +additionalProperties: false + +examples: + - | + pmic { + charger { + compatible = "dlg,da9150-charger"; + io-channels = <&gpadc 0>, + <&gpadc 2>, + <&gpadc 8>, + <&gpadc 5>; + io-channel-names = "CHAN_IBUS", + "CHAN_VBUS", + "CHAN_TJUNC", + "CHAN_VBAT"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml new file mode 100644 index 000000000000..30c2fff7cf92 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: dlg,da9150-fuel-gauge + + dlg,update-interval: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Interval time (milliseconds) between battery level checks. + + dlg,warn-soc-level: + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 100 + description: Battery discharge level (%) where warning event raised. + + dlg,crit-soc-level: + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 100 + description: | + Battery discharge level (%) where critical event raised. + This value should be lower than the warning level. + +required: + - compatible + +additionalProperties: false + +examples: + - | + pmic { + battery { + compatible = "dlg,da9150-fuel-gauge"; + dlg,update-interval = <10000>; + dlg,warn-soc-level = /bits/ 8 <15>; + dlg,crit-soc-level = /bits/ 8 <5>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/isp1704.txt b/Documentation/devicetree/bindings/power/supply/isp1704.txt deleted file mode 100644 index fa3596907967..000000000000 --- a/Documentation/devicetree/bindings/power/supply/isp1704.txt +++ /dev/null @@ -1,17 +0,0 @@ -Binding for NXP ISP1704 USB Charger Detection - -Required properties: -- compatible: Should contain one of the following: - * "nxp,isp1704" -- nxp,enable-gpio: Should contain a phandle + gpio-specifier - to the GPIO pin connected to the chip's enable pin. -- usb-phy: Should contain a phandle to the USB PHY - the ISP1704 is connected to. - -Example: - -isp1704 { - compatible = "nxp,isp1704"; - nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; - usb-phy = <&usb2_phy>; -}; diff --git a/Documentation/devicetree/bindings/power/supply/isp1704.yaml b/Documentation/devicetree/bindings/power/supply/isp1704.yaml new file mode 100644 index 000000000000..4c91da70011d --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/isp1704.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/isp1704.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Binding for NXP ISP1704 USB Charger Detection + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: nxp,isp1704 + + nxp,enable-gpio: + maxItems: 1 + description: GPIO connected to the chip's enable pin + + usb-phy: + $ref: /schemas/types.yaml#/definitions/phandle + description: USB PHY the ISP1704 is connected to + +required: + - compatible + - nxp,enable-gpio + - usb-phy + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + charger-detect { + compatible = "nxp,isp1704"; + nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; + usb-phy = <&usb2_phy>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml new file mode 100644 index 000000000000..518eabb63588 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/lego,ev3-battery.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: LEGO MINDSTORMS EV3 Battery + +maintainers: + - David Lechner <david@lechnology.com> + - Sebastian Reichel <sre@kernel.org> + +description: | + LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery. + It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is + detected by a key switch in the battery compartment. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: lego,ev3-battery + + io-channels: + items: + - description: ADC channel for battery voltage + - description: ADC channel for battery current + + io-channel-names: + items: + - const: voltage + - const: current + + rechargeable-gpios: + maxItems: 1 + description: Rechargeable battery indication gpio + +required: + - compatible + - io-channels + - io-channel-names + - rechargeable-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + battery { + compatible = "lego,ev3-battery"; + io-channels = <&adc 4>, <&adc 3>; + io-channel-names = "voltage", "current"; + rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt b/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt deleted file mode 100644 index 5485633b1faa..000000000000 --- a/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt +++ /dev/null @@ -1,21 +0,0 @@ -LEGO MINDSTORMS EV3 Battery -~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery. -It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is -detected by a key switch in the battery compartment. - -Required properties: - - compatible: Must be "lego,ev3-battery" - - io-channels: phandles to analog inputs for reading voltage and current - - io-channel-names: Must be "voltage", "current" - - rechargeable-gpios: phandle to the rechargeable battery indication gpio - -Example: - - battery { - compatible = "lego,ev3-battery"; - io-channels = <&adc 4>, <&adc 3>; - io-channel-names = "voltage", "current"; - rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml new file mode 100644 index 000000000000..e2d8d2aebb73 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Analog Devices LT3651 Charger Power Supply bindings + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - lltc,lt3651-charger + - lltc,ltc3651-charger # deprecated, use lltc,lt3651-charger + + lltc,acpr-gpios: + maxItems: 1 + + lltc,fault-gpios: + maxItems: 1 + + lltc,chrg-gpios: + maxItems: 1 + +required: + - compatible + - lltc,acpr-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + charger { + compatible = "lltc,lt3651-charger"; + lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>; + lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>; + lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml new file mode 100644 index 000000000000..043bf378040f --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges + +description: | + All chips measure battery capacity. + The LTC2942 is pin compatible with the LTC2941, it adds voltage and + temperature monitoring, and is runtime detected. LTC2943 and LTC2944 + are software compatible, uses a slightly different conversion formula + for the charge counter and adds voltage, current and temperature monitoring. + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - lltc,ltc2941 + - lltc,ltc2942 + - lltc,ltc2943 + - lltc,ltc2944 + + reg: + maxItems: 1 + + lltc,resistor-sense: + $ref: /schemas/types.yaml#/definitions/int32 + description: | + Sense resistor value in milli-ohms. + Can be negative value when the battery has been connected to the wrong end of the resistor. + + lltc,prescaler-exponent: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The prescaler exponent as explained in the datasheet. + This determines the range and accuracy of the gauge. + The value is programmed into the chip only if it differs from the current setting. + The setting is lost when the battery is disconnected. + +required: + - compatible + - reg + - lltc,resistor-sense + - lltc,prescaler-exponent + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + battery@64 { + compatible = "lltc,ltc2943"; + reg = <0x64>; + lltc,resistor-sense = <15>; + lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */ + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt b/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt deleted file mode 100644 index 0355a4b68f79..000000000000 --- a/Documentation/devicetree/bindings/power/supply/lp8727_charger.txt +++ /dev/null @@ -1,43 +0,0 @@ -Binding for TI/National Semiconductor LP8727 Charger - -Required properties: -- compatible: "ti,lp8727" -- reg: I2C slave address 27h - -Optional properties: -- interrupts: interrupt specifier (see interrupt binding[0]) -- debounce-ms: interrupt debounce time. (u32) - -AC and USB charging parameters -- charger-type: "ac" or "usb" (string) -- eoc-level: value of 'enum lp8727_eoc_level' (u8) -- charging-current: value of 'enum lp8727_ichg' (u8) - -[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Example) - -lp8727@27 { - compatible = "ti,lp8727"; - reg = <0x27>; - - /* GPIO 134 is used for LP8728 interrupt pin */ - interrupt-parent = <&gpio5>; /* base = 128 */ - interrupts = <6 0x2>; /* offset = 6, falling edge type */ - - debounce-ms = <300>; - - /* AC charger: 5% EOC and 500mA charging current */ - ac { - charger-type = "ac"; - eoc-level = /bits/ 8 <0>; - charging-current = /bits/ 8 <4>; - }; - - /* USB charger: 10% EOC and 400mA charging current */ - usb { - charger-type = "usb"; - eoc-level = /bits/ 8 <1>; - charging-current = /bits/ 8 <2>; - }; -}; diff --git a/Documentation/devicetree/bindings/power/supply/lt3651-charger.txt b/Documentation/devicetree/bindings/power/supply/lt3651-charger.txt deleted file mode 100644 index 40811ff8de10..000000000000 --- a/Documentation/devicetree/bindings/power/supply/lt3651-charger.txt +++ /dev/null @@ -1,29 +0,0 @@ -Analog Devices LT3651 Charger Power Supply bindings: lt3651-charger - -Required properties: -- compatible: Should contain one of the following: - * "lltc,ltc3651-charger", (DEPRECATED: Use "lltc,lt3651-charger") - * "lltc,lt3651-charger" - - lltc,acpr-gpios: Connect to ACPR output. See remark below. - -Optional properties: - - lltc,fault-gpios: Connect to FAULT output. See remark below. - - lltc,chrg-gpios: Connect to CHRG output. See remark below. - -The lt3651 outputs are open-drain type and active low. The driver assumes the -GPIO reports "active" when the output is asserted, so if the pins have been -connected directly, the GPIO flags should be set to active low also. - -The driver will attempt to aquire interrupts for all GPIOs to detect changes in -line state. If the system is not capabale of providing interrupts, the driver -cannot report changes and userspace will need to periodically read the sysfs -attributes to detect changes. - -Example: - - charger: battery-charger { - compatible = "lltc,lt3651-charger"; - lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>; - lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>; - lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/power/supply/ltc2941.txt b/Documentation/devicetree/bindings/power/supply/ltc2941.txt deleted file mode 100644 index 3b9ba147b041..000000000000 --- a/Documentation/devicetree/bindings/power/supply/ltc2941.txt +++ /dev/null @@ -1,28 +0,0 @@ -binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery gauges - -All chips measure battery capacity. -The LTC2942 is pin compatible with the LTC2941, it adds voltage and -temperature monitoring, and is runtime detected. LTC2943 and LTC2944 -is software compatible, uses a slightly different conversion formula -for the charge counter and adds voltage, current and temperature monitoring. - -Required properties: -- compatible: Should contain "lltc,ltc2941", "lltc,ltc2942", "lltc,ltc2943" - or "lltc,ltc2944" which also indicates the type of I2C chip attached. -- reg: The 7-bit I2C address. -- lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit - negative value when the battery has been connected to the wrong end of the - resistor. -- lltc,prescaler-exponent: The prescaler exponent as explained in the datasheet. - This determines the range and accuracy of the gauge. The value is programmed - into the chip only if it differs from the current setting. The setting is - lost when the battery is disconnected. - -Example from the Topic Miami Florida board: - - fuelgauge: ltc2943@64 { - compatible = "lltc,ltc2943"; - reg = <0x64>; - lltc,resistor-sense = <15>; - lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */ - }; diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml index 1f88c9e013f4..6d7aa97a6475 100644 --- a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml +++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml @@ -29,12 +29,10 @@ properties: description: I2C address of the charger. lltc,rsnsb-micro-ohms: - $ref: /schemas/types.yaml#/definitions/uint32 description: Battery sense resistor in microohm. minimum: 1000 lltc,rsnsi-micro-ohms: - $ref: /schemas/types.yaml#/definitions/uint32 description: Input current sense resistor in microohm. minimum: 1000 diff --git a/Documentation/devicetree/bindings/power/supply/max17040_battery.txt b/Documentation/devicetree/bindings/power/supply/max17040_battery.txt deleted file mode 100644 index c802f664b508..000000000000 --- a/Documentation/devicetree/bindings/power/supply/max17040_battery.txt +++ /dev/null @@ -1,52 +0,0 @@ -max17040_battery -~~~~~~~~~~~~~~~~ - -Required properties : - - compatible : "maxim,max17040", "maxim,max17041", "maxim,max17043", - "maxim,max17044", "maxim,max17048", "maxim,max17049", - "maxim,max17058", "maxim,max17059" or "maxim,max77836-battery" - - reg: i2c slave address - -Optional properties : -- maxim,alert-low-soc-level : The alert threshold that sets the state of - charge level (%) where an interrupt is - generated. Can be configured from 1 up to 32 - (%). If skipped the power up default value of - 4 (%) will be used. -- maxim,double-soc : Certain devices return double the capacity. - Specify this boolean property to divide the - reported value in 2 and thus normalize it. - SOC == State of Charge == Capacity. -- maxim,rcomp : A value to compensate readings for various - battery chemistries and operating temperatures. - max17040,41 have 2 byte rcomp, default to - 0x97 0x00. All other devices have one byte - rcomp, default to 0x97. -- interrupts : Interrupt line see Documentation/devicetree/ - bindings/interrupt-controller/interrupts.txt -- wakeup-source : This device has wakeup capabilities. Use this - property to use alert low SOC level interrupt - as wake up source. - -Optional properties support interrupt functionality for alert low state of -charge level, present in some ICs in the same family, and should be used with -compatible "maxim,max77836-battery". - -Example: - - battery-fuel-gauge@36 { - compatible = "maxim,max77836-battery"; - reg = <0x36>; - maxim,alert-low-soc-level = <10>; - interrupt-parent = <&gpio7>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - }; - - battery-fuel-gauge@36 { - compatible = "maxim,max17048"; - reg = <0x36>; - maxim,rcomp = /bits/ 8 <0x56>; - maxim,alert-low-soc-level = <10>; - maxim,double-soc; - }; diff --git a/Documentation/devicetree/bindings/power/supply/max17042_battery.txt b/Documentation/devicetree/bindings/power/supply/max17042_battery.txt deleted file mode 100644 index f34c5daae9af..000000000000 --- a/Documentation/devicetree/bindings/power/supply/max17042_battery.txt +++ /dev/null @@ -1,35 +0,0 @@ -max17042_battery -~~~~~~~~~~~~~~~~ - -Required properties : - - compatible : one of the following - * "maxim,max17042" - * "maxim,max17047" - * "maxim,max17050" - * "maxim,max17055" - -Optional properties : - - maxim,rsns-microohm : Resistance of rsns resistor in micro Ohms - (datasheet-recommended value is 10000). - Defining this property enables current-sense functionality. - -Optional threshold properties : - If skipped the condition won't be reported. - - maxim,cold-temp : Temperature threshold to report battery - as cold (in tenths of degree Celsius). - - maxim,over-heat-temp : Temperature threshold to report battery - as over heated (in tenths of degree Celsius). - - maxim,dead-volt : Voltage threshold to report battery - as dead (in mV). - - maxim,over-volt : Voltage threshold to report battery - as over voltage (in mV). - -Example: - - battery-charger@36 { - compatible = "maxim,max17042"; - reg = <0x36>; - maxim,rsns-microohm = <10000>; - maxim,over-heat-temp = <600>; - maxim,over-volt = <4300>; - }; diff --git a/Documentation/devicetree/bindings/power/supply/max8903-charger.txt b/Documentation/devicetree/bindings/power/supply/max8903-charger.txt deleted file mode 100644 index bab947fef025..000000000000 --- a/Documentation/devicetree/bindings/power/supply/max8903-charger.txt +++ /dev/null @@ -1,24 +0,0 @@ -Maxim Semiconductor MAX8903 Battery Charger bindings - -Required properties: -- compatible: "maxim,max8903" for MAX8903 Battery Charger -- dok-gpios: Valid DC power has been detected (active low, input), optional if uok-gpios is provided -- uok-gpios: Valid USB power has been detected (active low, input), optional if dok-gpios is provided - -Optional properties: -- cen-gpios: Charge enable pin (active low, output) -- chg-gpios: Charger status pin (active low, input) -- flt-gpios: Fault pin (active low, output) -- dcm-gpios: Current limit mode setting (DC=1 or USB=0, output) -- usus-gpios: USB suspend pin (active high, output) - - -Example: - - max8903-charger { - compatible = "maxim,max8903"; - dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; - cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt deleted file mode 100644 index 55967a0bee11..000000000000 --- a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt +++ /dev/null @@ -1,26 +0,0 @@ -Devicetree bindings for Maxim DS2760 -==================================== - -The ds2760 is a w1 slave device and must hence have its sub-node in DT -under a w1 bus master node. - -The device exposes a power supply, so the details described in -Documentation/devicetree/bindings/power/supply/power_supply.txt apply. - -Required properties: -- compatible: must be "maxim,ds2760" - -Optional properties: -- power-supplies: Refers to one or more power supplies connected to - this battery. -- maxim,pmod-enabled: This boolean property enables the DS2760 to enter - sleep mode when the DQ line goes low for greater - than 2 seconds and leave sleep Mode when the DQ - line goes high. -- maxim,cache-time-ms: Time im milliseconds to cache the data for. When - this time expires, the values are read again from - the hardware. Defaults to 1000. -- rated-capacity-microamp-hours: - The rated capacity of the battery, in mAh. - If not specified, the value stored in the - non-volatile chip memory is used. diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml new file mode 100644 index 000000000000..818647edf63d --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Maxim DS2760 DT bindings + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + The ds2760 is a w1 slave device and must hence have its sub-node in + DT under a w1 bus master node. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: maxim,ds2760 + + maxim,pmod-enabled: + description: | + Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds + and leave sleep Mode when the DQ line goes high. + type: boolean + + maxim,cache-time-ms: + description: | + Time im milliseconds to cache the data for. + When this time expires, the values are read again from the hardware. + Defaults to 1000. + + rated-capacity-microamp-hours: + description: | + The rated capacity of the battery, in mAh. + If not specified, the value stored in the non-volatile chip memory is used. + +required: + - compatible + +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt deleted file mode 100644 index f956247d493e..000000000000 --- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt +++ /dev/null @@ -1,23 +0,0 @@ -Maxim MAX14656 / AL32 USB Charger Detector - -Required properties : -- compatible : "maxim,max14656"; -- reg: i2c slave address -- interrupts: interrupt line - -Example: - -&i2c2 { - clock-frequency = <50000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - - max14656@35 { - compatible = "maxim,max14656"; - reg = <0x35>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_charger_detect>; - interrupt-parent = <&gpio6>; - interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; - }; -}; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml new file mode 100644 index 000000000000..0a41078ebd99 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/maxim,max14656.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Maxim MAX14656 DT bindings + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: maxim,max14656 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger-detector@35 { + compatible = "maxim,max14656"; + reg = <0x35>; + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml new file mode 100644 index 000000000000..de91cf3f058c --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/maxim,max17040.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Maxim 17040 fuel gauge series + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - maxim,max17040 + - maxim,max17041 + - maxim,max17043 + - maxim,max17044 + - maxim,max17048 + - maxim,max17049 + - maxim,max17058 + - maxim,max17059 + - maxim,max77836-battery + + reg: + maxItems: 1 + + maxim,alert-low-soc-level: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + description: | + The alert threshold that sets the state of charge level (%) where an interrupt is generated. + If skipped the power up default value of 4 (%) will be used. + + maxim,double-soc: + type: boolean + description: | + Certain devices return double the capacity. + Specify this to divide the reported value in 2 and thus normalize it. + SoC == State of Charge == Capacity. + + maxim,rcomp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + A value to compensate readings for various battery chemistries and operating temperatures. + max17040,41 have 2 byte rcomp, default to 0x97 0x00. + All other devices have one byte rcomp, default to 0x97. + + interrupts: + maxItems: 1 + + wakeup-source: + type: boolean + description: | + Use this property to use alert low SoC level interrupt as wake up source. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + battery@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + maxim,rcomp = /bits/ 8 <0x56>; + maxim,alert-low-soc-level = <10>; + maxim,double-soc; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + battery@36 { + compatible = "maxim,max77836-battery"; + reg = <0x36>; + maxim,alert-low-soc-level = <10>; + interrupt-parent = <&gpio7>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml new file mode 100644 index 000000000000..c70f05ea6d27 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/maxim,max17042.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Maxim 17042 fuel gauge series + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - maxim,max17042 + - maxim,max17047 + - maxim,max17050 + - maxim,max17055 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + maxim,rsns-microohm: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000). + Defining this property enables current-sense functionality. + + maxim,cold-temp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Temperature threshold to report battery as cold (in tenths of degree Celsius). + Default is not to report cold events. + + maxim,over-heat-temp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Temperature threshold to report battery as over heated (in tenths of degree Celsius). + Default is not to report over heating events. + + maxim,dead-volt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Voltage threshold to report battery as dead (in mV). + Default is not to report dead battery events. + + maxim,over-volt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Voltage threshold to report battery as over voltage (in mV). + Default is not to report over-voltage events. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + battery@36 { + compatible = "maxim,max17042"; + reg = <0x36>; + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,over-volt = <4300>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml new file mode 100644 index 000000000000..4828ca0842ae --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/maxim,max8903.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Maxim Semiconductor MAX8903 Battery Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: maxim,max8903 + + dok-gpios: + maxItems: 1 + description: Valid DC power has been detected (active low, input) + + uok-gpios: + maxItems: 1 + description: Valid USB power has been detected (active low, input) + + cen-gpios: + maxItems: 1 + description: Charge enable pin (active low, output) + + chg-gpios: + maxItems: 1 + description: Charger status pin (active low, input) + + flt-gpios: + maxItems: 1 + description: Fault pin (active low, output) + + dcm-gpios: + maxItems: 1 + description: Current limit mode setting (DC=1 or USB=0, output) + + usus-gpios: + maxItems: 1 + description: USB suspend pin (active high, output) + +required: + - compatible + +anyOf: + - required: + - dok-gpios + - required: + - uok-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + charger { + compatible = "maxim,max8903"; + dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt deleted file mode 100644 index 1d284ad816bf..000000000000 --- a/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt +++ /dev/null @@ -1,27 +0,0 @@ -Microchip UCS1002 USB Port Power Controller - -Required properties: -- compatible : Should be "microchip,ucs1002"; -- reg : I2C slave address - -Optional properties: -- interrupts : A list of interrupts lines present (could be either - corresponding to A_DET# pin, ALERT# pin, or both) -- interrupt-names : A list of interrupt names. Should contain (if - present): - - "a_det" for line connected to A_DET# pin - - "alert" for line connected to ALERT# pin - Both are expected to be IRQ_TYPE_EDGE_BOTH -Example: - -&i2c3 { - charger@32 { - compatible = "microchip,ucs1002"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ucs1002_pins>; - reg = <0x32>; - interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>, - <&gpio3 21 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "a_det", "alert"; - }; -}; diff --git a/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml new file mode 100644 index 000000000000..b9bd1591ed7e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/microchip,ucs1002.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip UCS1002 USB Port Power Controller + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +properties: + compatible: + const: microchip,ucs1002 + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + interrupt-names: + oneOf: + - items: + - const: a_det + - const: alert + - const: a_det + - const: alert + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@32 { + compatible = "microchip,ucs1002"; + reg = <0x32>; + interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>, + <&gpio3 21 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "a_det", "alert"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml new file mode 100644 index 000000000000..4a1489f2b28d --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/nokia,n900-battery.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Nokia N900 battery + +maintainers: + - Pali Rohár <pali@kernel.org> + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: nokia,n900-battery + + io-channels: + items: + - description: ADC channel for temperature reading + - description: ADC channel for battery size identification + - description: ADC channel to measure the battery voltage + + io-channel-names: + items: + - const: temp + - const: bsi + - const: vbat + +required: + - compatible + - io-channels + - io-channel-names + +additionalProperties: false + +examples: + - | + battery { + compatible = "nokia,n900-battery"; + io-channels = <&twl4030_madc 0>, + <&twl4030_madc 4>, + <&twl4030_madc 12>; + io-channel-names = "temp", + "bsi", + "vbat"; + }; diff --git a/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml new file mode 100644 index 000000000000..0bd7bf3b8e1b --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/olpc-battery.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: OLPC Battery + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - items: + - const: olpc,xo1.5-battery + - const: olpc,xo1-battery + - items: + - const: olpc,xo1-battery + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/olpc_battery.txt b/Documentation/devicetree/bindings/power/supply/olpc_battery.txt deleted file mode 100644 index 8d87d6b35a98..000000000000 --- a/Documentation/devicetree/bindings/power/supply/olpc_battery.txt +++ /dev/null @@ -1,5 +0,0 @@ -OLPC battery -~~~~~~~~~~~~ - -Required properties: - - compatible : "olpc,xo1-battery" or "olpc,xo1.5-battery" diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml index c5c55f627251..259760167759 100644 --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml @@ -18,25 +18,3 @@ properties: additionalProperties: true -examples: - - | - power { - #address-cells = <1>; - #size-cells = <0>; - - usb_charger:charger@e { - compatible = "some,usb-charger"; - reg = <0xe>; - }; - - ac_charger:charger@c { - compatible = "some,ac-charger"; - reg = <0xc>; - }; - - battery:battery@b { - compatible = "some,battery"; - reg = <0xb>; - power-supplies = <&usb_charger>, <&ac_charger>; - }; - }; diff --git a/Documentation/devicetree/bindings/power/supply/power_supply.txt b/Documentation/devicetree/bindings/power/supply/power_supply.txt deleted file mode 100644 index d9693e054509..000000000000 --- a/Documentation/devicetree/bindings/power/supply/power_supply.txt +++ /dev/null @@ -1,2 +0,0 @@ -This binding has been converted to yaml please see power-supply.yaml in this -directory. diff --git a/Documentation/devicetree/bindings/power/supply/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/supply/qcom,coincell-charger.txt deleted file mode 100644 index 747899223262..000000000000 --- a/Documentation/devicetree/bindings/power/supply/qcom,coincell-charger.txt +++ /dev/null @@ -1,48 +0,0 @@ -Qualcomm Coincell Charger: - -The hardware block controls charging for a coincell or capacitor that is -used to provide power backup for certain features of the power management -IC (PMIC) - -- compatible: - Usage: required - Value type: <string> - Definition: must be: "qcom,pm8941-coincell" - -- reg: - Usage: required - Value type: <u32> - Definition: base address of the coincell charger registers - -- qcom,rset-ohms: - Usage: required - Value type: <u32> - Definition: resistance (in ohms) for current-limiting resistor - must be one of: 800, 1200, 1700, 2100 - -- qcom,vset-millivolts: - Usage: required - Value type: <u32> - Definition: voltage (in millivolts) to apply for charging - must be one of: 2500, 3000, 3100, 3200 - -- qcom,charger-disable: - Usage: optional - Value type: <boolean> - Definition: defining this property disables charging - -This charger is a sub-node of one of the 8941 PMIC blocks, and is specified -as a child node in DTS of that node. See ../mfd/qcom,spmi-pmic.txt and -../mfd/qcom-pm8xxx.txt - -Example: - - pm8941@0 { - coincell@2800 { - compatible = "qcom,pm8941-coincell"; - reg = <0x2800>; - - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml new file mode 100644 index 000000000000..bc8904872d1b --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Switch-Mode Battery Charger and Boost + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +properties: + compatible: + const: qcom,pm8941-charger + + reg: + maxItems: 1 + + interrupts: + items: + - description: charge done + - description: charge fast mode + - description: charge trickle mode + - description: battery temperature ok + - description: battery present + - description: charger disconnected + - description: USB-in valid + - description: DC-in valid + + interrupt-names: + items: + - const: chg-done + - const: chg-fast + - const: chg-trkl + - const: bat-temp-ok + - const: bat-present + - const: chg-gone + - const: usb-valid + - const: dc-valid + + qcom,fast-charge-current-limit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 100000 + maximum: 3000000 + description: Maximum charge current in uA; May be clamped to safety limits; Defaults to 1A + + qcom,fast-charge-low-threshold-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 2100000 + maximum: 3600000 + description: | + Battery voltage limit in uV above which fast charging may operate; Defaults to 3.2V + Below this value linear or switch-mode auto-trickle-charging will operate. + + qcom,fast-charge-high-threshold-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 3240000 + maximum: 5000000 + description: | + Battery voltage limit in uV below which fast charging may operate; Defaults to 4.2V + The fast charger will attempt to charge the battery to this voltage. + May be clamped to safety limits. + + qcom,fast-charge-safe-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 3240000 + maximum: 5000000 + description: | + Maximum safe battery voltage in uV; May be pre-set by bootloader, in which case, + setting this will harmlessly fail. The property 'fast-charge-high-watermark' will + be clamped by this value. Defaults to 4.2V. + + qcom,fast-charge-safe-current: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 100000 + maximum: 3000000 + description: | + Maximum safe battery charge current in uA; May pre-set by bootloader, in which case, + setting this will harmlessly fail. The property 'qcom,fast-charge-current-limit' + will be clamped by this value. Defaults to 1A. + + qcom,auto-recharge-threshold-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 3240000 + maximum: 5000000 + description: | + Battery voltage limit in uV below which auto-recharge functionality will restart charging + after end-of-charge; The high cutoff limit for auto-recharge is 5% above this value. + Defaults to 4.1V. + + qcom,minimum-input-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 4200000 + maximum: 9600000 + description: | + Input voltage level in uV above which charging may operate. Defaults to 4.3V. + + qcom,dc-current-limit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 100000 + maximum: 2500000 + description: | + Default DC charge current limit in uA. Defaults to 100mA. + + qcom,disable-dc: + type: boolean + description: Disable DC charger + + qcom,jeita-extended-temp-range: + type: boolean + description: | + Enable JEITA extended temperature range; This does *not* adjust the maximum charge + voltage or current in the extended temperature range. It only allows charging when + the battery is in the extended temperature range. Voltage/current regulation must + be done externally to fully comply with the JEITA safety guidelines if this flag + is set. + + usb-otg-in-supply: + description: Reference to the regulator supplying power to the USB_OTG_IN pin. + + otg-vbus: + type: object + description: | + This node defines a regulator used to control the direction of VBUS voltage. + Specifically whether to supply voltage to VBUS for host mode operation of the OTG port, + or allow input voltage from external VBUS for charging. In the hardware, the supply for + this regulator comes from usb_otg_in-supply. + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + + charger@1000 { + compatible = "qcom,pm8941-charger"; + reg = <0x1000>; + interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "chg-done", + "chg-fast", + "chg-trkl", + "bat-temp-ok", + "bat-present", + "chg-gone", + "usb-valid", + "dc-valid"; + qcom,fast-charge-current-limit = <1000000>; + qcom,dc-current-limit = <1000000>; + usb-otg-in-supply = <&pm8941_5vs1>; + + otg-vbus {}; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml new file mode 100644 index 000000000000..0450f4dd4e51 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-coincell.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Coincell Charger + +description: | + The hardware block controls charging for a coincell or capacitor that is + used to provide power backup for certain features of the power management + IC (PMIC) + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +properties: + compatible: + const: qcom,pm8941-coincell + + reg: + maxItems: 1 + + qcom,rset-ohms: + description: resistance (in ohms) for current-limiting resistor + enum: [ 800, 1200, 1700, 2100 ] + + qcom,vset-millivolts: + $ref: /schemas/types.yaml#/definitions/uint32 + description: voltage (in millivolts) to apply for charging + enum: [ 2500, 3000, 3100, 3200 ] + + qcom,charger-disable: + type: boolean + description: defining this property disables charging + +required: + - compatible + - reg + - qcom,rset-ohms + - qcom,vset-millivolts + +additionalProperties: false + +examples: + - | + pmic { + #address-cells = <1>; + #size-cells = <0>; + + charger@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt deleted file mode 100644 index 06f8a5ddb68e..000000000000 --- a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt +++ /dev/null @@ -1,150 +0,0 @@ -Qualcomm Switch-Mode Battery Charger and Boost - -PROPERTIES -- compatible: - Usage: required - Value type: <stringlist> - Description: Must be one of: - - "qcom,pm8941-charger" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Description: Base address of registers for SMBB block - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Description: The format of the specifier is defined by the binding document - describing the node's interrupt parent. Must contain one - specifier for each of the following interrupts, in order: - - charge done - - charge fast mode - - charge trickle mode - - battery temperature ok - - battery present - - charger disconnected - - USB-in valid - - DC-in valid - -- interrupt-names: - Usage: required - Value type: <stringlist> - Description: Must contain the following list, strictly ordered: - "chg-done", - "chg-fast", - "chg-trkl", - "bat-temp-ok", - "bat-present", - "chg-gone", - "usb-valid", - "dc-valid" - -- qcom,fast-charge-current-limit: - Usage: optional (default: 1A, or pre-configured value) - Value type: <u32>; uA; range [100mA : 3A] - Description: Maximum charge current; May be clamped to safety limits. - -- qcom,fast-charge-low-threshold-voltage: - Usage: optional (default: 3.2V, or pre-configured value) - Value type: <u32>; uV; range [2.1V : 3.6V] - Description: Battery voltage limit above which fast charging may operate; - Below this value linear or switch-mode auto-trickle-charging - will operate. - -- qcom,fast-charge-high-threshold-voltage: - Usage: optional (default: 4.2V, or pre-configured value) - Value type: <u32>; uV; range [3.24V : 5V] - Description: Battery voltage limit below which fast charging may operate; - The fast charger will attempt to charge the battery to this - voltage. May be clamped to safety limits. - -- qcom,fast-charge-safe-voltage: - Usage: optional (default: 4.2V, or pre-configured value) - Value type: <u32>; uV; range [3.24V : 5V] - Description: Maximum safe battery voltage; May be pre-set by bootloader, in - which case, setting this will harmlessly fail. The property - 'fast-charge-high-watermark' will be clamped by this value. - -- qcom,fast-charge-safe-current: - Usage: optional (default: 1A, or pre-configured value) - Value type: <u32>; uA; range [100mA : 3A] - Description: Maximum safe battery charge current; May pre-set by bootloader, - in which case, setting this will harmlessly fail. The property - 'qcom,fast-charge-current-limit' will be clamped by this value. - -- qcom,auto-recharge-threshold-voltage: - Usage: optional (default: 4.1V, or pre-configured value) - Value type: <u32>; uV; range [3.24V : 5V] - Description: Battery voltage limit below which auto-recharge functionality - will restart charging after end-of-charge; The high cutoff - limit for auto-recharge is 5% above this value. - -- qcom,minimum-input-voltage: - Usage: optional (default: 4.3V, or pre-configured value) - Value type: <u32>; uV; range [4.2V : 9.6V] - Description: Input voltage level above which charging may operate - -- qcom,dc-current-limit: - Usage: optional (default: 100mA, or pre-configured value) - Value type: <u32>; uA; range [100mA : 2.5A] - Description: Default DC charge current limit - -- qcom,disable-dc: - Usage: optional (default: false) - Value type: boolean: <u32> or <empty> - Description: Disable DC charger - -- qcom,jeita-extended-temp-range: - Usage: optional (default: false) - Value type: boolean: <u32> or <empty> - Description: Enable JEITA extended temperature range; This does *not* - adjust the maximum charge voltage or current in the extended - temperature range. It only allows charging when the battery - is in the extended temperature range. Voltage/current - regulation must be done externally to fully comply with - the JEITA safety guidelines if this flag is set. - -- usb_otg_in-supply: - Usage: optional - Value type: <phandle> - Description: Reference to the regulator supplying power to the USB_OTG_IN - pin. - -child nodes: -- otg-vbus: - Usage: optional - Description: This node defines a regulator used to control the direction - of VBUS voltage - specifically: whether to supply voltage - to VBUS for host mode operation of the OTG port, or allow - input voltage from external VBUS for charging. In the - hardware, the supply for this regulator comes from - usb_otg_in-supply. - -EXAMPLE -charger@1000 { - compatible = "qcom,pm8941-charger"; - reg = <0x1000 0x700>; - interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, - <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, - <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>, - <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, - <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, - <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, - <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, - <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "chg-done", - "chg-fast", - "chg-trkl", - "bat-temp-ok", - "bat-present", - "chg-gone", - "usb-valid", - "dc-valid"; - - qcom,fast-charge-current-limit = <1000000>; - qcom,dc-charge-current-limit = <1000000>; - usb_otg_in-supply = <&pm8941_5vs1>; - - otg-vbus {}; -}; diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml new file mode 100644 index 000000000000..e1c233462f29 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/richtek,rt9455.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Binding for Richtek rt9455 battery charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: richtek,rt9455 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + richtek,output-charge-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: output current from the charger to the battery, in uA. + + richtek,end-of-charge-percentage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + percent of the output charge current. When the current in constant-voltage phase drops + below output_charge_current x end-of-charge-percentage, charge is terminated. + + richtek,battery-regulation-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum battery voltage in uV. + + richtek,boost-output-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + maximum voltage provided to consumer devices, when the charger is in boost mode, in uV. + + richtek,min-input-voltage-regulation: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + input voltage level in uV, used to decrease voltage level when the over current of the + input power source occurs. This prevents input voltage drop due to insufficient + current provided by the power source. Defaults to 4500000 uV (4.5V). + + richtek,avg-input-current-regulation: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + input current value in uA drained by the charger from the power source. + Defaults to 500000 uA (500mA). + +required: + - compatible + - reg + - interrupts + - richtek,output-charge-current + - richtek,end-of-charge-percentage + - richtek,battery-regulation-voltage + - richtek,boost-output-voltage + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@22 { + compatible = "richtek,rt9455"; + reg = <0x22>; + + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + richtek,output-charge-current = <500000>; + richtek,end-of-charge-percentage = <10>; + richtek,battery-regulation-voltage = <4200000>; + richtek,boost-output-voltage = <5050000>; + + richtek,min-input-voltage-regulation = <4500000>; + richtek,avg-input-current-regulation = <500000>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml index 9852d2febf65..24b06957b4ca 100644 --- a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml +++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml @@ -110,7 +110,7 @@ properties: # multipleOf: 64000 # a charge cycle terminates when the battery voltage is above recharge # threshold, and the current is below this setting (7 in above chart) -# See also Documentation/devicetree/bindings/power/supply/battery.txt +# See also Documentation/devicetree/bindings/power/supply/battery.yaml reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt b/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt deleted file mode 100644 index 1e6107c7578e..000000000000 --- a/Documentation/devicetree/bindings/power/supply/rt9455_charger.txt +++ /dev/null @@ -1,46 +0,0 @@ -Binding for Richtek rt9455 battery charger - -Required properties: -- compatible: it should contain one of the following: - "richtek,rt9455". -- reg: integer, i2c address of the device. -- interrupts: interrupt mapping for GPIO IRQ, it should be - configured with IRQ_TYPE_LEVEL_LOW flag. -- richtek,output-charge-current: integer, output current from the charger to the - battery, in uA. -- richtek,end-of-charge-percentage: integer, percent of the output charge current. - When the current in constant-voltage phase drops - below output_charge_current x end-of-charge-percentage, - charge is terminated. -- richtek,battery-regulation-voltage: integer, maximum battery voltage in uV. -- richtek,boost-output-voltage: integer, maximum voltage provided to consumer - devices, when the charger is in boost mode, in uV. - -Optional properties: -- richtek,min-input-voltage-regulation: integer, input voltage level in uV, used to - decrease voltage level when the over current - of the input power source occurs. - This prevents input voltage drop due to insufficient - current provided by the power source. - Default: 4500000 uV (4.5V) -- richtek,avg-input-current-regulation: integer, input current value in uA drained by the - charger from the power source. - Default: 500000 uA (500mA) - -Example: - -rt9455@22 { - compatible = "richtek,rt9455"; - reg = <0x22>; - - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - richtek,output-charge-current = <500000>; - richtek,end-of-charge-percentage = <10>; - richtek,battery-regulation-voltage = <4200000>; - richtek,boost-output-voltage = <5050000>; - - richtek,min-input-voltage-regulation = <4500000>; - richtek,avg-input-current-regulation = <500000>; -}; diff --git a/Documentation/devicetree/bindings/power/supply/rx51-battery.txt b/Documentation/devicetree/bindings/power/supply/rx51-battery.txt deleted file mode 100644 index 90438453db58..000000000000 --- a/Documentation/devicetree/bindings/power/supply/rx51-battery.txt +++ /dev/null @@ -1,25 +0,0 @@ -Binding for Nokia N900 battery - -The Nokia N900 battery status can be read via the TWL4030's A/D converter. - -Required properties: -- compatible: Should contain one of the following: - * "nokia,n900-battery" -- io-channels: Should contain IIO channel specifiers - for each element in io-channel-names. -- io-channel-names: Should contain the following values: - * "temp" - The ADC channel for temperature reading - * "bsi" - The ADC channel for battery size identification - * "vbat" - The ADC channel to measure the battery voltage - -Example from Nokia N900: - -battery: n900-battery { - compatible = "nokia,n900-battery"; - io-channels = <&twl4030_madc 0>, - <&twl4030_madc 4>, - <&twl4030_madc 12>; - io-channel-names = "temp", - "bsi", - "vbat"; -}; diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml index a90b3601e695..90b9d3d882a4 100644 --- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml @@ -12,12 +12,15 @@ maintainers: description: | Battery compatible with the smart battery system specifications -properties: +allOf: + - $ref: power-supply.yaml# +properties: compatible: oneOf: - items: - enum: + - ti,bq20z45 - ti,bq20z65 - ti,bq20z75 - enum: @@ -60,7 +63,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml new file mode 100644 index 000000000000..cb73ffa4778e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/sbs,sbs-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SBS compliant charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + Charger compatible with the smart battery system specifications + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - lltc,ltc4100 + - enum: + - sbs,sbs-charger + - items: + - const: sbs,sbs-charger + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@9 { + compatible = "lltc,ltc4100", "sbs,sbs-charger"; + reg = <0x9>; + interrupt-parent = <&gpio6>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt deleted file mode 100644 index 4b2195571a49..000000000000 --- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt +++ /dev/null @@ -1,66 +0,0 @@ -Binding for sbs-manager - -Required properties: -- compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part - number compatible string might be used in order to take care of vendor - specific registers. -- reg: integer, i2c address of the device. Should be <0xa>. -Optional properties: -- gpio-controller: Marks the port as GPIO controller. - See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. -- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell - is used to specify optional parameters: - See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. - -From OS view the device is basically an i2c-mux used to communicate with up to -four smart battery devices at address 0xb. The driver actually implements this -behaviour. So standard i2c-mux nodes can be used to register up to four slave -batteries. Channels will be numerated starting from 1 to 4. - -Example: - -batman@a { - compatible = "lltc,ltc1760", "sbs,sbs-manager"; - reg = <0x0a>; - #address-cells = <1>; - #size-cells = <0>; - - gpio-controller; - #gpio-cells = <2>; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - battery@b { - compatible = "ti,bq2060", "sbs,sbs-battery"; - reg = <0x0b>; - sbs,battery-detect-gpios = <&batman 1 1>; - }; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - battery@b { - compatible = "ti,bq2060", "sbs,sbs-battery"; - reg = <0x0b>; - sbs,battery-detect-gpios = <&batman 2 1>; - }; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - battery@b { - compatible = "ti,bq2060", "sbs,sbs-battery"; - reg = <0x0b>; - sbs,battery-detect-gpios = <&batman 3 1>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml new file mode 100644 index 000000000000..72e8f274c791 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/sbs,sbs-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SBS compliant manger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - lltc,ltc1760 + - enum: + - sbs,sbs-manager + - items: + - const: sbs,sbs-manager + + reg: + const: 0xa + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + gpio-controller: true + + "#gpio-cells": + const: 2 + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "^i2c@[1-4]$": + type: object + + allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + batman: battery-manager@a { + compatible = "lltc,ltc1760", "sbs,sbs-manager"; + reg = <0x0a>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + battery@b { + compatible = "ti,bq20z65", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 1 1>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + battery@b { + compatible = "ti,bq20z65", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 2 1>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + battery@b { + compatible = "ti,bq20z65", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 3 1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt deleted file mode 100644 index 84e74151eef2..000000000000 --- a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt +++ /dev/null @@ -1,21 +0,0 @@ -SBS sbs-charger -~~~~~~~~~~ - -Required properties: - - compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part - number compatible string might be used in order to take care of vendor - specific registers. - -Optional properties: -- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with - "interrupt-parent". If an interrupt is not provided the driver will switch - automatically to polling. - -Example: - - ltc4100@9 { - compatible = "lltc,ltc4100", "sbs,sbs-charger"; - reg = <0x9>; - interrupt-parent = <&gpio6>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - }; diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml new file mode 100644 index 000000000000..db1aa238cda5 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/sc2731-charger.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Spreadtrum SC2731 PMICs battery charger binding + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: sprd,sc2731-charger + + reg: + maxItems: 1 + + phys: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the USB phy + + monitored-battery: + description: | + The charger uses the following battery properties + - charge-term-current-microamp: current for charge termination phase. + - constant-charge-voltage-max-microvolt: maximum constant input voltage. + See Documentation/devicetree/bindings/power/supply/battery.yaml + +additionalProperties: false + +examples: + - | + bat: battery { + compatible = "simple-battery"; + charge-term-current-microamp = <120000>; + constant-charge-voltage-max-microvolt = <4350000>; + }; + + pmic { + #address-cells = <1>; + #size-cells = <0>; + + battery@a00 { + compatible = "sprd,sc2731-charger"; + reg = <0x0>; + phys = <&ssphy>; + monitored-battery = <&bat>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt b/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt deleted file mode 100644 index 5266fab16575..000000000000 --- a/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt +++ /dev/null @@ -1,40 +0,0 @@ -Spreadtrum SC2731 PMIC battery charger binding - -Required properties: - - compatible: Should be "sprd,sc2731-charger". - - reg: Address offset of charger register. - - phys: Contains a phandle to the USB phy. - -Optional Properties: -- monitored-battery: phandle of battery characteristics devicetree node. - The charger uses the following battery properties: -- charge-term-current-microamp: current for charge termination phase. -- constant-charge-voltage-max-microvolt: maximum constant input voltage. - See Documentation/devicetree/bindings/power/supply/battery.txt - -Example: - - bat: battery { - compatible = "simple-battery"; - charge-term-current-microamp = <120000>; - constant-charge-voltage-max-microvolt = <4350000>; - ...... - }; - - sc2731_pmic: pmic@0 { - compatible = "sprd,sc2731"; - reg = <0>; - spi-max-frequency = <26000000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - #address-cells = <1>; - #size-cells = <0>; - - charger@0 { - compatible = "sprd,sc2731-charger"; - reg = <0x0>; - phys = <&ssphy>; - monitored-battery = <&bat>; - }; - }; diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt deleted file mode 100644 index b6359b590383..000000000000 --- a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt +++ /dev/null @@ -1,59 +0,0 @@ -Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings - -Required properties: -- compatible: Should be one of the following: - "sprd,sc2720-fgu", - "sprd,sc2721-fgu", - "sprd,sc2723-fgu", - "sprd,sc2730-fgu", - "sprd,sc2731-fgu". -- reg: The address offset of fuel gauge unit. -- battery-detect-gpios: GPIO for battery detection. -- io-channels: Specify the IIO ADC channels to get temperature and charge voltage. -- io-channel-names: Should be "bat-temp" or "charge-vol". -- nvmem-cells: A phandle to the calibration cells provided by eFuse device. -- nvmem-cell-names: Should be "fgu_calib". -- sprd,calib-resistance-micro-ohms: Specify the real resistance of coulomb counter - chip in micro Ohms. -- monitored-battery: Phandle of battery characteristics devicetree node. - See Documentation/devicetree/bindings/power/supply/battery.txt - -Example: - - bat: battery { - compatible = "simple-battery"; - charge-full-design-microamp-hours = <1900000>; - constant-charge-voltage-max-microvolt = <4350000>; - ocv-capacity-celsius = <20>; - ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, - <4022000 85>, <3983000 80>, <3949000 75>, - <3917000 70>, <3889000 65>, <3864000 60>, - <3835000 55>, <3805000 50>, <3787000 45>, - <3777000 40>, <3773000 35>, <3770000 30>, - <3765000 25>, <3752000 20>, <3724000 15>, - <3680000 10>, <3605000 5>, <3400000 0>; - ...... - }; - - sc2731_pmic: pmic@0 { - compatible = "sprd,sc2731"; - reg = <0>; - spi-max-frequency = <26000000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - #address-cells = <1>; - #size-cells = <0>; - - fgu@a00 { - compatible = "sprd,sc2731-fgu"; - reg = <0xa00>; - battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; - io-channels = <&pmic_adc 5>, <&pmic_adc 14>; - io-channel-names = "bat-temp", "charge-vol"; - nvmem-cells = <&fgu_calib>; - nvmem-cell-names = "fgu_calib"; - monitored-battery = <&bat>; - sprd,calib-resistance-micro-ohms = <21500>; - }; - }; diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml new file mode 100644 index 000000000000..e019cffd1f38 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - sprd,sc2720-fgu + - sprd,sc2721-fgu + - sprd,sc2723-fgu + - sprd,sc2730-fgu + - sprd,sc2731-fgu + + reg: + maxItems: 1 + + battery-detect-gpios: + maxItems: 1 + + io-channels: + items: + - description: Battery Temperature ADC + - description: Battery Charge Voltage ADC + + io-channel-names: + items: + - const: bat-temp + - const: charge-vol + + nvmem-cells: + maxItems: 1 + description: Calibration cells provided by eFuse device + + nvmem-cell-names: + const: fgu_calib + + sprd,calib-resistance-micro-ohms: + description: real resistance of coulomb counter chip in micro Ohms + + monitored-battery: true + +required: + - compatible + - reg + - battery-detect-gpios + - io-channels + - io-channel-names + - nvmem-cells + - nvmem-cell-names + - sprd,calib-resistance-micro-ohms + - monitored-battery + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + bat: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <1900000>; + constant-charge-voltage-max-microvolt = <4350000>; + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, + <4022000 85>, <3983000 80>, <3949000 75>, + <3917000 70>, <3889000 65>, <3864000 60>, + <3835000 55>, <3805000 50>, <3787000 45>, + <3777000 40>, <3773000 35>, <3770000 30>, + <3765000 25>, <3752000 20>, <3724000 15>, + <3680000 10>, <3605000 5>, <3400000 0>; + // ... + }; + + pmic { + #address-cells = <1>; + #size-cells = <0>; + + battery@a00 { + compatible = "sprd,sc2731-fgu"; + reg = <0xa00>; + battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; + io-channels = <&pmic_adc 5>, <&pmic_adc 14>; + io-channel-names = "bat-temp", "charge-vol"; + nvmem-cells = <&fgu_calib>; + nvmem-cell-names = "fgu_calib"; + monitored-battery = <&bat>; + sprd,calib-resistance-micro-ohms = <21500>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/fg.txt b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt index ccafcb9112fb..ee125cb0e46d 100644 --- a/Documentation/devicetree/bindings/power/supply/ab8500/fg.txt +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt @@ -1,32 +1,9 @@ -=== AB8500 Fuel Gauge Driver === - -AB8500 is a mixed signal multimedia and power management -device comprising: power and energy-management-module, -wall-charger, usb-charger, audio codec, general purpose adc, -tvout, clock management and sim card interface. - -Fuelgauge support is part of energy-management-modules, other -components of this module are: -main-charger, usb-combo-charger and battery-temperature-monitoring. - -The properties below describes the node for fuelgauge driver. - -Required Properties: -- compatible = This shall be: "stericsson,ab8500-fg" -- battery = Shall be battery specific information - Example: - ab8500_fg { - compatible = "stericsson,ab8500-fg"; - battery = <&ab8500_battery>; - }; - -dependent node: - ab8500_battery: ab8500_battery { - }; - This node will provide information on 'thermistor interface' and - 'battery technology type' used. +AB85000 PMIC contains a node, which contains shared +information about the battery connected to the PMIC. +The node has no compatible property. Properties of this node are: + thermistor-on-batctrl: A boolean value indicating thermistor interface to battery @@ -55,4 +32,3 @@ battery-type: ab8500_battery: ab8500_battery { stericsson,battery-type = "LIPO"; } - diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml new file mode 100644 index 000000000000..2f57aa5a5f4e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/stericsson,ab8500-btemp.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: AB8500 Battery Temperature Monitor + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: stericsson,ab8500-btemp + + battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to battery node + + interrupts: + maxItems: 5 + + interrupt-names: + items: + - const: BAT_CTRL_INDB + - const: BTEMP_LOW + - const: BTEMP_HIGH + - const: BTEMP_LOW_MEDIUM + - const: BTEMP_MEDIUM_HIGH + + io-channels: + maxItems: 2 + + io-channel-names: + items: + - const: btemp_ball + - const: bat_ctrl + +required: + - compatible + - battery + - interrupts + - interrupt-names + - io-channels + - io-channel-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + battery-temperature { + compatible = "stericsson,ab8500-btemp"; + battery = <&ab8500_battery>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "BAT_CTRL_INDB", + "BTEMP_LOW", + "BTEMP_HIGH", + "BTEMP_LOW_MEDIUM", + "BTEMP_MEDIUM_HIGH"; + io-channels = <&gpadc 0x02>, <&gpadc 0x01>; + io-channel-names = "btemp_ball", "bat_ctrl"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml new file mode 100644 index 000000000000..0897231c2f6e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/stericsson,ab8500-chargalg.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: AB8500 Charging Algorithm + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: stericsson,ab8500-chargalg + + battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to battery node + +required: + - compatible + - battery + +additionalProperties: false + +examples: + - | + pmic { + charging-algorithm { + compatible = "stericsson,ab8500-chargalg"; + battery = <&ab8500_battery>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml new file mode 100644 index 000000000000..e13305afea69 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/stericsson,ab8500-charger.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: AB8500 Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: stericsson,ab8500-charger + + battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to battery node + + vddadc-supply: + description: Supply for USB and Main charger + + autopower_cfg: + type: boolean + description: automatic poweron after powerloss + + interrupts: + maxItems: 14 + + interrupt-names: + items: + - const: MAIN_CH_UNPLUG_DET + - const: MAIN_CHARGE_PLUG_DET + - const: MAIN_EXT_CH_NOT_OK + - const: MAIN_CH_TH_PROT_R + - const: MAIN_CH_TH_PROT_F + - const: VBUS_DET_F + - const: VBUS_DET_R + - const: USB_LINK_STATUS + - const: USB_CH_TH_PROT_R + - const: USB_CH_TH_PROT_F + - const: USB_CHARGER_NOT_OKR + - const: VBUS_OVV + - const: CH_WD_EXP + - const: VBUS_CH_DROP_END + + io-channels: + minItems: 2 + maxItems: 4 + + io-channel-names: + oneOf: + - items: + - const: main_charger_v + - const: main_charger_c + - const: vbus_v + - const: usb_charger_c + - items: + - const: vbus_v + - const: usb_charger_c + + +required: + - compatible + - battery + - vddadc-supply + - interrupts + - interrupt-names + - io-channels + - io-channel-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + charger { + compatible = "stericsson,ab8500-charger"; + battery = <&ab8500_battery>; + vddadc-supply = <&ab8500_ldo_tvout_reg>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, + <11 IRQ_TYPE_LEVEL_HIGH>, + <0 IRQ_TYPE_LEVEL_HIGH>, + <107 IRQ_TYPE_LEVEL_HIGH>, + <106 IRQ_TYPE_LEVEL_HIGH>, + <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>, + <105 IRQ_TYPE_LEVEL_HIGH>, + <104 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <22 IRQ_TYPE_LEVEL_HIGH>, + <21 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "MAIN_CH_UNPLUG_DET", + "MAIN_CHARGE_PLUG_DET", + "MAIN_EXT_CH_NOT_OK", + "MAIN_CH_TH_PROT_R", + "MAIN_CH_TH_PROT_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_CH_TH_PROT_R", + "USB_CH_TH_PROT_F", + "USB_CHARGER_NOT_OKR", + "VBUS_OVV", + "CH_WD_EXP", + "VBUS_CH_DROP_END"; + io-channels = <&gpadc 0x03>, + <&gpadc 0x0a>, + <&gpadc 0x09>, + <&gpadc 0x0b>; + io-channel-names = "main_charger_v", + "main_charger_c", + "vbus_v", + "usb_charger_c"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml new file mode 100644 index 000000000000..db342e5ac0d1 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/stericsson,ab8500-fg.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: AB8500 Fuel Gauge + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: stericsson,ab8500-fg + + battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to battery node + + interrupts: + maxItems: 5 + + interrupt-names: + items: + - const: NCONV_ACCU + - const: BATT_OVV + - const: LOW_BAT_F + - const: CC_INT_CALIB + - const: CCEOC + + io-channels: + maxItems: 1 + + io-channel-names: + items: + - const: main_bat_v + +required: + - compatible + - battery + - interrupts + - interrupt-names + - io-channels + - io-channel-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + fuel-gauge { + compatible = "stericsson,ab8500-fg"; + battery = <&ab8500_battery>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, + <8 IRQ_TYPE_LEVEL_HIGH>, + <28 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "NCONV_ACCU", + "BATT_OVV", + "LOW_BAT_F", + "CC_INT_CALIB", + "CCEOC"; + io-channels = <&gpadc 0x08>; + io-channel-names = "main_bat_v"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt deleted file mode 100644 index de45e1a2a4d9..000000000000 --- a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt +++ /dev/null @@ -1,39 +0,0 @@ -TI BQ24735 Charge Controller -~~~~~~~~~~ - -Required properties : - - compatible : "ti,bq24735" - -Optional properties : - - interrupts : Specify the interrupt to be used to trigger when the AC - adapter is either plugged in or removed. - - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter - status. This is a Host GPIO that is configured as an input and connected - to the ACOK pin on the bq24735. Note: for backwards compatibility reasons, - the GPIO must be active on AC adapter absence despite ACOK being active - (high) on AC adapter presence. - - ti,charge-current : Used to control and set the charging current. This value - must be between 128mA and 8.128A with a 64mA step resolution. The POR value - is 0x0000h. This number is in mA (e.g. 8192), see spec for more information - about the ChargeCurrent (0x14h) register. - - ti,charge-voltage : Used to control and set the charging voltage. This value - must be between 1.024V and 19.2V with a 16mV step resolution. The POR value - is 0x0000h. This number is in mV (e.g. 19200), see spec for more information - about the ChargeVoltage (0x15h) register. - - ti,input-current : Used to control and set the charger input current. This - value must be between 128mA and 8.064A with a 128mA step resolution. The - POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for - more information about the InputCurrent (0x3fh) register. - - ti,external-control : Indicates that the charger is configured externally - and that the host should not attempt to enable/disable charging or set the - charge voltage/current. - - poll-interval : In case 'interrupts' is not specified, poll AC adapter - presence with this interval (milliseconds). - -Example: - - bq24735@9 { - compatible = "ti,bq24735"; - reg = <0x9>; - ti,ac-detect-gpios = <&gpio 72 0x1>; - } diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml new file mode 100644 index 000000000000..a23f6653f332 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/ti,lp8727.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for TI/National Semiconductor LP8727 Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: ti,lp8727 + + reg: + const: 0x27 + + interrupts: + maxItems: 1 + + debounce-ms: + description: interrupt debounce time in ms + +patternProperties: + '^(ac|usb)$': + type: object + description: USB/AC charging parameters + properties: + charger-type: + enum: + - ac + - usb + + eoc-level: + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 0 + maximum: 6 + description: | + End of Charge Percentage with the following mapping: + 0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50% + + charging-current: + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 0 + maximum: 9 + description: | + Charging current with the following mapping: + 0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA, + 6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + lp8727: charger@27 { + compatible = "ti,lp8727"; + reg = <0x27>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + debounce-ms = <300>; + + /* AC charger: 5% EOC and 500mA charging current */ + ac { + charger-type = "ac"; + eoc-level = /bits/ 8 <0>; + charging-current = /bits/ 8 <4>; + }; + + /* USB charger: 10% EOC and 400mA charging current */ + usb { + charger-type = "usb"; + eoc-level = /bits/ 8 <1>; + charging-current = /bits/ 8 <2>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml new file mode 100644 index 000000000000..f2dd38bf078c --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/tps65090-charger.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TPS65090 Frontend PMU with Switchmode Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: ti,tps65090-charger + + ti,enable-low-current-chrg: + type: boolean + description: | + Enables charging when a low current is detected while the default logic is to stop charging. + +required: + - compatible + +additionalProperties: false + +examples: + - | + pmic { + charger { + compatible = "ti,tps65090-charger"; + ti,enable-low-current-chrg; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/tps65090.txt b/Documentation/devicetree/bindings/power/supply/tps65090.txt deleted file mode 100644 index 8e5e0d3910df..000000000000 --- a/Documentation/devicetree/bindings/power/supply/tps65090.txt +++ /dev/null @@ -1,17 +0,0 @@ -TPS65090 Frontend PMU with Switchmode Charger - -Required Properties: --compatible: "ti,tps65090-charger" - -Optional Properties: --ti,enable-low-current-chrg: Enables charging when a low current is detected - while the default logic is to stop charging. - -This node is a subnode of the tps65090 PMIC. - -Example: - - tps65090-charger { - compatible = "ti,tps65090-charger"; - ti,enable-low-current-chrg; - }; diff --git a/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml new file mode 100644 index 000000000000..a33408c3a407 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/tps65217-charger.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TPS65217 Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: ti,tps65217-charger + + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + items: + - const: USB + - const: AC + +required: + - compatible + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + pmic { + charger { + compatible = "ti,tps65217-charger"; + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt deleted file mode 100644 index a11072c5a866..000000000000 --- a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt +++ /dev/null @@ -1,17 +0,0 @@ -TPS65217 Charger - -Required Properties: --compatible: "ti,tps65217-charger" --interrupts: TPS65217 interrupt numbers for the AC and USB charger input change. - Should be <0> for the USB charger and <1> for the AC adapter. --interrupt-names: Should be "USB" and "AC" - -This node is a subnode of the tps65217 PMIC. - -Example: - - tps65217-charger { - compatible = "ti,tps65217-charger"; - interrupts = <0>, <1>; - interrupt-names = "USB", "AC"; - }; diff --git a/Documentation/devicetree/bindings/power/supply/twl-charger.txt b/Documentation/devicetree/bindings/power/supply/twl-charger.txt deleted file mode 100644 index 3b4ea1b73b38..000000000000 --- a/Documentation/devicetree/bindings/power/supply/twl-charger.txt +++ /dev/null @@ -1,30 +0,0 @@ -TWL BCI (Battery Charger Interface) - -The battery charger needs to interact with the USB phy in order -to know when charging is permissible, and when there is a connection -or disconnection. - -The choice of phy cannot be configured at a hardware level, so there -is no value in explicit configuration in device-tree. Rather -if there is a sibling of the BCI node which is compatible with -"ti,twl4030-usb", then that is used to determine when and how -use USB power for charging. - -Required properties: -- compatible: - - "ti,twl4030-bci" -- interrupts: two interrupt lines from the TWL SIH (secondary - interrupt handler) - interrupts 9 and 2. - -Optional properties: -- ti,bb-uvolt: microvolts for charging the backup battery. -- ti,bb-uamp: microamps for charging the backup battery. - -Examples: - -bci { - compatible = "ti,twl4030-bci"; - interrupts = <9>, <2>; - ti,bb-uvolt = <3200000>; - ti,bb-uamp = <150>; -}; diff --git a/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml new file mode 100644 index 000000000000..fe3f32a0ea79 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/twl4030-charger.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TWL4030 BCI (Battery Charger Interface) + +description: | + The battery charger needs to interact with the USB phy in order to know when + charging is permissible, and when there is a connection or disconnection. + + The choice of phy cannot be configured at a hardware level, so there is no + value in explicit configuration in device-tree. Rather if there is a sibling + of the BCI node which is compatible with "ti,twl4030-usb", then that is used + to determine when and how use USB power for charging. + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: ti,twl4030-bci + + interrupts: + minItems: 2 + maxItems: 2 + + ti,bb-uvolt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: microvolts for charging the backup battery + + ti,bb-uamp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: microamps for charging the backup battery + + io-channels: + items: + - description: Accessory Charger Voltage Channel + + io-channel-names: + items: + - const: vac + + bci3v1-supply: + description: 3.1V USB regulator + +required: + - compatible + - interrupts + +additionalProperties: false + +examples: + - | + pmic { + charger { + compatible = "ti,twl4030-bci"; + interrupts = <9>, <2>; + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; + io-channels = <&twl_madc 11>; + io-channel-names = "vac"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml new file mode 100644 index 000000000000..dcda6660b8ed --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: AXP20x AC power-supply + +description: | + The AXP20X can read the current current and voltage supplied by AC by + reading ADC channels from the AXP20X ADC. The AXP22X is only able to + tell if an AC power supply is present and usable. AXP813/AXP803 are + able to limit current and supply voltage + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - x-powers,axp202-ac-power-supply + - x-powers,axp221-ac-power-supply + - x-powers,axp813-ac-power-supply + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml new file mode 100644 index 000000000000..86e8a713d4e2 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: AXP20x Battery power-supply + +description: | + The supported devices can read the battery voltage, charge and discharge + currents of the battery by reading ADC channels from the ADC. + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - x-powers,axp209-battery-power-supply + - x-powers,axp221-battery-power-supply + - x-powers,axp813-battery-power-supply + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml new file mode 100644 index 000000000000..61f1b320c157 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: AXP20x USB power-supply + +description: | + The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight + variations such as the former being able to set the VBUS power supply max + current to 100mA, unlike the latter. + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - x-powers,axp202-usb-power-supply + - x-powers,axp221-usb-power-supply + - x-powers,axp223-usb-power-supply + - x-powers,axp813-usb-power-supply + + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt deleted file mode 100644 index f70956dea77b..000000000000 --- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt +++ /dev/null @@ -1,27 +0,0 @@ -Rockchip PWM controller - -Required properties: - - compatible: should be "rockchip,<name>-pwm" - "rockchip,rk2928-pwm": found on RK29XX,RK3066 and RK3188 SoCs - "rockchip,rk3288-pwm": found on RK3288 SOC - "rockchip,rv1108-pwm", "rockchip,rk3288-pwm": found on RV1108 SoC - "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC - - reg: physical base address and length of the controller's registers - - clocks: See ../clock/clock-bindings.txt - - For older hardware (rk2928, rk3066, rk3188, rk3228, rk3288, rk3399): - - There is one clock that's used both to derive the functional clock - for the device and as the bus clock. - - For newer hardware (rk3328 and future socs): specified by name - - "pwm": This is used to derive the functional clock. - - "pclk": This is the APB bus clock. - - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.yaml in this directory - for a description of the cell format. - -Example: - - pwm0: pwm@20030000 { - compatible = "rockchip,rk2928-pwm"; - reg = <0x20030000 0x10>; - clocks = <&cru PCLK_PWM01>; - #pwm-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml new file mode 100644 index 000000000000..5596bee70509 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip PWM controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - const: rockchip,rk2928-pwm + - const: rockchip,rk3288-pwm + - const: rockchip,rk3328-pwm + - const: rockchip,vop-pwm + - items: + - const: rockchip,rk3036-pwm + - const: rockchip,rk2928-pwm + - items: + - enum: + - rockchip,rk3368-pwm + - rockchip,rk3399-pwm + - rockchip,rv1108-pwm + - const: rockchip,rk3288-pwm + - items: + - enum: + - rockchip,px30-pwm + - rockchip,rk3308-pwm + - const: rockchip,rk3328-pwm + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + maxItems: 2 + + "#pwm-cells": + enum: [2, 3] + description: + Must be 2 (rk2928) or 3 (rk3288 and later). + See pwm.yaml for a description of the cell format. + +required: + - compatible + - reg + - "#pwm-cells" + +if: + properties: + compatible: + contains: + enum: + - rockchip,rk3328-pwm + - rockchip,rv1108-pwm + +then: + properties: + clocks: + items: + - description: Used to derive the functional clock for the device. + - description: Used as the APB bus clock. + + clock-names: + items: + - const: pwm + - const: pclk + + required: + - clocks + - clock-names + +else: + properties: + clocks: + maxItems: 1 + description: + Used both to derive the functional clock + for the device and as the bus clock. + + required: + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3188-cru-common.h> + pwm0: pwm@20030000 { + compatible = "rockchip,rk2928-pwm"; + reg = <0x20030000 0x10>; + clocks = <&cru PCLK_PWM01>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml b/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml new file mode 100644 index 000000000000..d350f5edfb67 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/toshiba,pwm-visconti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba Visconti PWM Controller + +maintainers: + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + +properties: + compatible: + items: + - const: toshiba,visconti-pwm + + reg: + maxItems: 1 + + '#pwm-cells': + const: 2 + +required: + - compatible + - reg + - '#pwm-cells' + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + pwm: pwm@241c0000 { + compatible = "toshiba,visconti-pwm"; + reg = <0 0x241c0000 0 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_mux>; + #pwm-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt index e7fc045281d1..013f096ac0aa 100644 --- a/Documentation/devicetree/bindings/regulator/fan53555.txt +++ b/Documentation/devicetree/bindings/regulator/fan53555.txt @@ -1,8 +1,8 @@ Binding for Fairchild FAN53555 regulators Required properties: - - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or - "silergy,syr828" + - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827", + "silergy,syr828" or "tcs,tcs4525". - reg: I2C address Optional properties: diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt deleted file mode 100644 index ce1e04354006..000000000000 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +++ /dev/null @@ -1,180 +0,0 @@ -Qualcomm Technologies, Inc. RPMh Regulators - -rpmh-regulator devices support PMIC regulator management via the Voltage -Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators. The APPS -processor communicates with these hardware blocks via a Resource State -Coordinator (RSC) using command packets. The VRM allows changing three -parameters for a given regulator: enable state, output voltage, and operating -mode. The XOB allows changing only a single parameter for a given regulator: -its enable state. Despite its name, the XOB is capable of controlling the -enable state of any PMIC peripheral. It is used for clock buffers, low-voltage -switches, and LDO/SMPS regulators which have a fixed voltage and mode. - -======================= -Required Node Structure -======================= - -RPMh regulators must be described in two levels of device nodes. The first -level describes the PMIC containing the regulators and must reside within an -RPMh device node. The second level describes each regulator within the PMIC -which is to be used on the board. Each of these regulators maps to a single -RPMh resource. - -The names used for regulator nodes must match those supported by a given PMIC. -Supported regulator node names: - PM8005: smps1 - smps4 - PM8009: smps1 - smps2, ldo1 - ldo7 - PM8150: smps1 - smps10, ldo1 - ldo18 - PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb - PM8350: smps1 - smps12, ldo1 - ldo10, - PM8350C: smps1 - smps10, ldo1 - ldo13, bob - PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 - PMI8998: bob - PM6150: smps1 - smps5, ldo1 - ldo19 - PM6150L: smps1 - smps8, ldo1 - ldo11, bob - PMX55: smps1 - smps7, ldo1 - ldo16 - -======================== -First Level Nodes - PMIC -======================== - -- compatible - Usage: required - Value type: <string> - Definition: Must be one of below: - "qcom,pm8005-rpmh-regulators" - "qcom,pm8009-rpmh-regulators" - "qcom,pm8009-1-rpmh-regulators" - "qcom,pm8150-rpmh-regulators" - "qcom,pm8150l-rpmh-regulators" - "qcom,pm8350-rpmh-regulators" - "qcom,pm8350c-rpmh-regulators" - "qcom,pm8998-rpmh-regulators" - "qcom,pmc8180-rpmh-regulators" - "qcom,pmc8180c-rpmh-regulators" - "qcom,pmi8998-rpmh-regulators" - "qcom,pm6150-rpmh-regulators" - "qcom,pm6150l-rpmh-regulators" - "qcom,pmx55-rpmh-regulators" - -- qcom,pmic-id - Usage: required - Value type: <string> - Definition: RPMh resource name suffix used for the regulators found on - this PMIC. Typical values: "a", "b", "c", "d", "e", "f". - -- vdd-s1-supply -- vdd-s2-supply -- vdd-s3-supply -- vdd-s4-supply - Usage: optional (PM8998 and PM8005 only) - Value type: <phandle> - Definition: phandle of the parent supply regulator of one or more of the - regulators for this PMIC. - -- vdd-s5-supply -- vdd-s6-supply -- vdd-s7-supply -- vdd-s8-supply -- vdd-s9-supply -- vdd-s10-supply -- vdd-s11-supply -- vdd-s12-supply -- vdd-s13-supply -- vdd-l1-l27-supply -- vdd-l2-l8-l17-supply -- vdd-l3-l11-supply -- vdd-l4-l5-supply -- vdd-l6-supply -- vdd-l7-l12-l14-l15-supply -- vdd-l9-supply -- vdd-l10-l23-l25-supply -- vdd-l13-l19-l21-supply -- vdd-l16-l28-supply -- vdd-l18-l22-supply -- vdd-l20-l24-supply -- vdd-l26-supply -- vin-lvs-1-2-supply - Usage: optional (PM8998 only) - Value type: <phandle> - Definition: phandle of the parent supply regulator of one or more of the - regulators for this PMIC. - -- vdd-bob-supply - Usage: optional (PMI8998 only) - Value type: <phandle> - Definition: BOB regulator parent supply phandle - -=============================== -Second Level Nodes - Regulators -=============================== - -- qcom,always-wait-for-ack - Usage: optional - Value type: <empty> - Definition: Boolean flag which indicates that the application processor - must wait for an ACK or a NACK from RPMh for every request - sent for this regulator including those which are for a - strictly lower power state. - -Other properties defined in Documentation/devicetree/bindings/regulator/regulator.txt -may also be used. regulator-initial-mode and regulator-allowed-modes may be -specified for VRM regulators using mode values from -include/dt-bindings/regulator/qcom,rpmh-regulator.h. regulator-allow-bypass -may be specified for BOB type regulators managed via VRM. -regulator-allow-set-load may be specified for LDO type regulators managed via -VRM. - -======== -Examples -======== - -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> - -&apps_rsc { - pm8998-rpmh-regulators { - compatible = "qcom,pm8998-rpmh-regulators"; - qcom,pmic-id = "a"; - - vdd-l7-l12-l14-l15-supply = <&pm8998_s5>; - - smps2 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - pm8998_s5: smps5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - - ldo7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allowed-modes = - <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - lvs1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - - pmi8998-rpmh-regulators { - compatible = "qcom,pmi8998-rpmh-regulators"; - qcom,pmic-id = "b"; - - bob { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3600000>; - regulator-allowed-modes = - <RPMH_REGULATOR_MODE_AUTO - RPMH_REGULATOR_MODE_HPM>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml new file mode 100644 index 000000000000..e561a5b941e4 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,rpmh-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. RPMh Regulators + +maintainers: + - David Collins <collinsd@codeaurora.org> + +description: | + rpmh-regulator devices support PMIC regulator management via the Voltage + Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators. + The APPS processor communicates with these hardware blocks via a + Resource State Coordinator (RSC) using command packets. The VRM allows + changing three parameters for a given regulator, enable state, output + voltage, and operating mode. The XOB allows changing only a single + parameter for a given regulator, its enable state. Despite its name, + the XOB is capable of controlling the enable state of any PMIC peripheral. + It is used for clock buffers, low-voltage switches, and LDO/SMPS regulators + which have a fixed voltage and mode. + + ======================= + Required Node Structure + ======================= + + RPMh regulators must be described in two levels of device nodes. The first + level describes the PMIC containing the regulators and must reside within an + RPMh device node. The second level describes each regulator within the PMIC + which is to be used on the board. Each of these regulators maps to a single + RPMh resource. + + The names used for regulator nodes must match those supported by a given + PMIC. Supported regulator node names are + For PM8005, smps1 - smps4 + For PM8009, smps1 - smps2, ldo1 - ldo7 + For PM8150, smps1 - smps10, ldo1 - ldo18 + For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb + For PM8350, smps1 - smps12, ldo1 - ldo10 + For PM8350C, smps1 - smps10, ldo1 - ldo13, bob + For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 + For PMI8998, bob + For PM6150, smps1 - smps5, ldo1 - ldo19 + For PM6150L, smps1 - smps8, ldo1 - ldo11, bob + For PMX55, smps1 - smps7, ldo1 - ldo16 + For PM7325, smps1 - smps8, ldo1 - ldo19 + For PMR735A, smps1 - smps3, ldo1 - ldo7 + +properties: + compatible: + enum: + - qcom,pm8005-rpmh-regulators + - qcom,pm8009-rpmh-regulators + - qcom,pm8009-1-rpmh-regulators + - qcom,pm8150-rpmh-regulators + - qcom,pm8150l-rpmh-regulators + - qcom,pm8350-rpmh-regulators + - qcom,pm8350c-rpmh-regulators + - qcom,pm8998-rpmh-regulators + - qcom,pmi8998-rpmh-regulators + - qcom,pm6150-rpmh-regulators + - qcom,pm6150l-rpmh-regulators + - qcom,pmx55-rpmh-regulators + - qcom,pm7325-rpmh-regulators + - qcom,pmr735a-rpmh-regulators + + qcom,pmic-id: + description: | + RPMh resource name suffix used for the regulators found + on this PMIC. + $ref: /schemas/types.yaml#/definitions/string + enum: [a, b, c, d, e, f] + + qcom,always-wait-for-ack: + description: | + Boolean flag which indicates that the application processor + must wait for an ACK or a NACK from RPMh for every request + sent for this regulator including those which are for a + strictly lower power state. + $ref: /schemas/types.yaml#/definitions/flag + + vdd-flash-supply: + description: Input supply phandle of flash. + + vdd-rgb-supply: + description: Input supply phandle of rgb. + + vin-lvs-1-2-supply: + description: Input supply phandle of one or more regulators. + + vdd-bob-supply: + description: BOB regulator parent supply phandle. + + bob: + type: object + $ref: "regulator.yaml#" + description: BOB regulator node. + +patternProperties: + "^vdd-s([0-9]+)-supply$": + description: Input supply phandle(s) of one or more regulators. + + "^vdd-(l[0-9]+[-]){1,5}supply$": + description: Input supply phandle(s) of one or more regulators. + + "^(smps|ldo|lvs)[0-9]+$": + type: object + $ref: "regulator.yaml#" + description: smps/ldo regulator nodes(s). + +additionalProperties: false + +required: + - compatible + - qcom,pmic-id + +examples: + - | + #include <dt-bindings/regulator/qcom,rpmh-regulator.h> + + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-l7-l12-l14-l15-supply = <&pm8998_s5>; + + smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_AUTO + RPMH_REGULATOR_MODE_HPM>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml index cf784bd1f5e5..1ddc1efd19e2 100644 --- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml @@ -23,7 +23,6 @@ properties: properties: qcom,soft-start-us: - $ref: /schemas/types.yaml#/definitions/uint32 description: Regulator soft start time in microseconds. enum: [200, 400, 600, 800] default: 200 diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml new file mode 100644 index 000000000000..7d0adb74a396 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71815 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + This module is part of the ROHM BD718215 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + The valid names for BD71815 regulator nodes are + buck1, buck2, buck3, buck4, buck5, + ldo1, ldo2, ldo3, ldo4, ldo5, + ldodvref, ldolpsr, wled + +properties: + wled: + type: object + description: + properties for wled regulator + $ref: regulator.yaml# + + properties: + regulator-name: + const: wled + +patternProperties: + "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$": + type: object + description: + Properties for single LDO/BUCK regulator. + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$" + description: + should be "ldo1", ..., "ldo5", "buck1", ..., "buck5" and "ldolpsr" + for ldolpsr regulator, "ldodvref" for ldodvref reglator. + + rohm,vsel-gpios: + description: + GPIO used to control ldo4 state (when ldo4 is controlled by GPIO). + + rohm,dvs-run-voltage: + description: + PMIC "RUN" state voltage in uV when PMIC HW states are used. See + comments below for bucks/LDOs which support this. 0 means + regulator should be disabled at RUN state. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + rohm,dvs-snvs-voltage: + description: + Whether to keep regulator enabled at "SNVS" state or not. + 0 means regulator should be disabled at SNVS state, non zero voltage + keeps regulator enabled. BD71815 does not change voltage level + when PMIC transitions to SNVS.SNVS voltage depends on the previous + state (from which the PMIC transitioned to SNVS). + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + rohm,dvs-suspend-voltage: + description: + PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See + comments below for bucks/LDOs which support this. 0 means + regulator should be disabled at SUSPEND state. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + rohm,dvs-lpsr-voltage: + description: + PMIC "LPSR" state voltage in uV when PMIC HW states are used. See + comments below for bucks/LDOs which support this. 0 means + regulator should be disabled at LPSR state. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + # Bucks 1 and 2 support giving separate voltages for operational states + # (RUN /CLEAN according to data-sheet) and non operational states + # (LPSR/SUSPEND). The voltage is automatically changed when HW + # state changes. Omitting these properties from bucks 1 and 2 leave + # buck voltages to not be toggled by HW state. Enable status may still + # be toggled by state changes depending on HW default settings. + # + # Bucks 3-5 and ldos 1-5 support setting the RUN state voltage here. + # Given RUN voltage is used at all states if regulator is enabled at + # given state. + # Values given for other states are regarded as enable/disable at + # given state (see below). + # + # All regulators except WLED support specifying enable/disable status + # for each of the HW states (RUN/SNVS/SUSPEND/LPSR). HW defaults can + # be overridden by setting voltage to 0 (regulator disabled at given + # state) or non-zero (regulator enabled at given state). Please note + # that setting non zero voltages for bucks 1/2 will also enable voltage + # changes according to state change. + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml new file mode 100644 index 000000000000..208a628f8d6c --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NXP i.MX Co-Processor Bindings + +description: + This binding provides support for ARM Cortex M4 Co-processor found on some NXP iMX SoCs. + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +properties: + compatible: + enum: + - fsl,imx8mq-cm4 + - fsl,imx8mm-cm4 + - fsl,imx7d-cm4 + - fsl,imx6sx-cm4 + + clocks: + maxItems: 1 + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to syscon block which provide access to System Reset Controller + + mbox-names: + items: + - const: tx + - const: rx + - const: rxdb + + mboxes: + description: + This property is required only if the rpmsg/virtio functionality is used. + List of <&phandle type channel> - 1 channel for TX, 1 channel for RX, 1 channel for RXDB. + (see mailbox/fsl,mu.yaml) + minItems: 1 + maxItems: 3 + + memory-region: + description: + If present, a phandle for a reserved memory area that used for vdev buffer, + resource table, vring region and others used by remote processor. + minItems: 1 + maxItems: 32 + +required: + - compatible + - clocks + - syscon + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx7d-clock.h> + m4_reserved_sysmem1: cm4@80000000 { + reg = <0x80000000 0x80000>; + }; + + m4_reserved_sysmem2: cm4@81000000 { + reg = <0x81000000 0x80000>; + }; + + imx7d-cm4 { + compatible = "fsl,imx7d-cm4"; + memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; + syscon = <&src>; + clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; + }; + + - | + #include <dt-bindings/clock/imx8mm-clock.h> + + imx8mm-cm4 { + compatible = "fsl,imx8mm-cm4"; + clocks = <&clk IMX8MM_CLK_M4_DIV>; + mbox-names = "tx", "rx", "rxdb"; + mboxes = <&mu 0 1 + &mu 1 1 + &mu 3 1>; + memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>, <&rsc_table>; + syscon = <&src>; + }; +... diff --git a/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt b/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt deleted file mode 100644 index fbcefd965dc4..000000000000 --- a/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt +++ /dev/null @@ -1,33 +0,0 @@ -NXP iMX6SX/iMX7D Co-Processor Bindings ----------------------------------------- - -This binding provides support for ARM Cortex M4 Co-processor found on some -NXP iMX SoCs. - -Required properties: -- compatible Should be one of: - "fsl,imx7d-cm4" - "fsl,imx6sx-cm4" -- clocks Clock for co-processor (See: ../clock/clock-bindings.txt) -- syscon Phandle to syscon block which provide access to - System Reset Controller - -Optional properties: -- memory-region list of phandels to the reserved memory regions. - (See: ../reserved-memory/reserved-memory.txt) - -Example: - m4_reserved_sysmem1: cm4@80000000 { - reg = <0x80000000 0x80000>; - }; - - m4_reserved_sysmem2: cm4@81000000 { - reg = <0x81000000 0x80000>; - }; - - imx7d-cm4 { - compatible = "fsl,imx7d-cm4"; - memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; - syscon = <&src>; - clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; - }; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt index 1c330a8941f9..229f908fd831 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt @@ -18,6 +18,7 @@ on the Qualcomm ADSP Hexagon core. "qcom,sc7180-mpss-pas" "qcom,sdm845-adsp-pas" "qcom,sdm845-cdsp-pas" + "qcom,sdx55-mpss-pas" "qcom,sm8150-adsp-pas" "qcom,sm8150-cdsp-pas" "qcom,sm8150-mpss-pas" @@ -61,6 +62,7 @@ on the Qualcomm ADSP Hexagon core. must be "wdog", "fatal", "ready", "handover", "stop-ack" qcom,qcs404-wcss-pas: qcom,sc7180-mpss-pas: + qcom,sdx55-mpss-pas: qcom,sm8150-mpss-pas: qcom,sm8350-mpss-pas: must be "wdog", "fatal", "ready", "handover", "stop-ack", @@ -128,6 +130,8 @@ on the Qualcomm ADSP Hexagon core. qcom,sm8150-mpss-pas: qcom,sm8350-mpss-pas: must be "cx", "load_state", "mss" + qcom,sdx55-mpss-pas: + must be "cx", "mss" qcom,sm8250-adsp-pas: qcom,sm8350-adsp-pas: qcom,sm8150-slpi-pas: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 7ccd5534b0ae..69c49c7b2cff 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -9,6 +9,7 @@ on the Qualcomm Hexagon core. Definition: must be one of: "qcom,q6v5-pil", "qcom,ipq8074-wcss-pil" + "qcom,qcs404-wcss-pil" "qcom,msm8916-mss-pil", "qcom,msm8974-mss-pil" "qcom,msm8996-mss-pil" @@ -39,6 +40,7 @@ on the Qualcomm Hexagon core. string: qcom,q6v5-pil: qcom,ipq8074-wcss-pil: + qcom,qcs404-wcss-pil: qcom,msm8916-mss-pil: qcom,msm8974-mss-pil: must be "wdog", "fatal", "ready", "handover", "stop-ack" @@ -67,6 +69,11 @@ on the Qualcomm Hexagon core. Definition: The clocks needed depend on the compatible string: qcom,ipq8074-wcss-pil: no clock names required + qcom,qcs404-wcss-pil: + must be "xo", "gcc_abhs_cbcr", "gcc_abhs_cbcr", + "gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc", + "lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc", + "lcc_axim_cbc", "lcc_bcr_sleep" qcom,q6v5-pil: qcom,msm8916-mss-pil: qcom,msm8974-mss-pil: @@ -133,6 +140,14 @@ For the compatible string below the following supplies are required: booting of the Hexagon core For the compatible string below the following supplies are required: + "qcom,qcs404-wcss-pil" +- cx-supply: + Usage: required + Value type: <phandle> + Definition: reference to the regulators to be held on behalf of the + booting of the Hexagon core + +For the compatible string below the following supplies are required: "qcom,msm8996-mss-pil" - pll-supply: Usage: required diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt index da09c0d79ac0..a83080b8905c 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt @@ -34,6 +34,12 @@ on the Qualcomm WCNSS core. Definition: should be "wdog", "fatal", optionally followed by "ready", "handover", "stop-ack" +- firmware-name: + Usage: optional + Value type: <string> + Definition: must list the relative firmware image path for the + WCNSS core. Defaults to "wcnss.mdt". + - vddmx-supply: (deprecated for qcom,pronto-v1/2-pil) - vddcx-supply: (deprecated for qcom,pronto-v1/2-pil) - vddpx-supply: diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index a1171dfba024..64afdcfb613d 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -65,16 +65,23 @@ properties: Unidirectional channel: - from local to remote, where ACK from the remote means that it is ready for shutdown + - description: | + A channel (d) used by the local proc to notify the remote proc that it + has to stop interprocessor communnication. + Unidirectional channel: + - from local to remote, where ACK from the remote means that communnication + as been stopped on the remote side. minItems: 1 - maxItems: 3 + maxItems: 4 mbox-names: items: - const: vq0 - const: vq1 - const: shutdown + - const: detach minItems: 1 - maxItems: 3 + maxItems: 4 memory-region: description: diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml index 1a1159097a2a..73400bc6e91d 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml @@ -93,7 +93,7 @@ properties: # The following are the optional properties: memory-region: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: | phandle to the reserved memory node to be associated with the remoteproc device. The reserved memory node diff --git a/Documentation/devicetree/bindings/reserved-memory/ramoops.txt b/Documentation/devicetree/bindings/reserved-memory/ramoops.txt index b7886fea368c..b571ef6dab0f 100644 --- a/Documentation/devicetree/bindings/reserved-memory/ramoops.txt +++ b/Documentation/devicetree/bindings/reserved-memory/ramoops.txt @@ -42,8 +42,14 @@ Optional properties: - pmsg-size: size in bytes of log buffer reserved for userspace messages (defaults to 0: disabled) -- unbuffered: if present, use unbuffered mappings to map the reserved region - (defaults to buffered mappings) +- mem-type: if present, sets the type of mapping is to be used to map the + reserved region. mem-type: 0 = write-combined (default), 1 = unbuffered, + 2 = cached. + +- unbuffered: deprecated, use mem_type instead. If present, and mem_type is + not specified, it is equivalent to mem_type = 1 and uses unbuffered mappings + to map the reserved region (defaults to buffered mappings mem_type = 0). If + both are specified -- "mem_type" overrides "unbuffered". - max-reason: if present, sets maximum type of kmsg dump reasons to store (defaults to 2: log Oopses and Panics). This can be set to INT_MAX to diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml new file mode 100644 index 000000000000..3f981e897126 --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/microchip.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/microchip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire SoC-based boards device tree bindings + +maintainers: + - Cyril Jean <Cyril.Jean@microchip.com> + - Lewis Hanly <lewis.hanly@microchip.com> + +description: + Microchip PolarFire SoC-based boards + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - microchip,mpfs-icicle-kit + - const: microchip,mpfs + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml index c147900f9041..6da674666d45 100644 --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml @@ -28,6 +28,12 @@ properties: clock-names: const: ipsec + resets: + maxItems: 1 + + reset-names: + const: ipsec + interrupts: maxItems: 1 @@ -35,6 +41,18 @@ required: - compatible - reg +if: + properties: + compatible: + enum: + - brcm,bcm6368-rng +then: + required: + - clocks + - clock-names + - resets + - reset-names + additionalProperties: false examples: @@ -58,4 +76,7 @@ examples: clocks = <&periph_clk 18>; clock-names = "ipsec"; + + resets = <&periph_rst 4>; + reset-names = "ipsec"; }; diff --git a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml new file mode 100644 index 000000000000..4fba6dba16f3 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/qcom-pm8xxx-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8xxx PMIC RTC device + +maintainers: + - Satya Priya <skakit@codeaurora.org> + +properties: + compatible: + enum: + - qcom,pm8058-rtc + - qcom,pm8921-rtc + - qcom,pm8941-rtc + - qcom,pm8018-rtc + - qcom,pmk8350-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + allow-set-time: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that the setting of RTC time is allowed by the host CPU. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + spmi_bus: spmi@c440000 { + reg = <0x0c440000 0x1100>; + #address-cells = <2>; + #size-cells = <0>; + pmicintc: pmic@0 { + reg = <0x0 SPMI_USID>; + compatible = "qcom,pm8921"; + interrupts = <104 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pm8921_rtc: rtc@11d { + compatible = "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts = <0x27 0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index f54cae9ff7b2..41f57c448621 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -12,8 +12,13 @@ maintainers: allOf: - $ref: /schemas/serial.yaml# - if: - required: - - aspeed,sirq-polarity-sense + anyOf: + - required: + - aspeed,lpc-io-reg + - required: + - aspeed,lpc-interrupts + - required: + - aspeed,sirq-polarity-sense then: properties: compatible: @@ -55,6 +60,7 @@ properties: - const: aspeed,ast2500-vuart - const: intel,xscale-uart - const: mrvl,pxa-uart + - const: nuvoton,wpcm450-uart - const: nuvoton,npcm750-uart - const: nvidia,tegra20-uart - const: nxp,lpc3220-uart @@ -94,11 +100,6 @@ properties: - mediatek,mt7623-btif - const: mediatek,mtk-btif - items: - - enum: - - mediatek,mt7622-btif - - mediatek,mt7623-btif - - const: mediatek,mtk-btif - - items: - const: mrvl,mmp-uart - const: intel,xscale-uart - items: @@ -165,7 +166,6 @@ properties: property. tx-threshold: - $ref: /schemas/types.yaml#/definitions/uint32 description: | Specify the TX FIFO low water indication for parts with programmable TX FIFO thresholds. @@ -188,6 +188,21 @@ properties: offset and bit number to identify how the SIRQ polarity should be configured. One possible data source is the LPC/eSPI mode bit. Only applicable to aspeed,ast2500-vuart. + deprecated: true + + aspeed,lpc-io-reg: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: | + The VUART LPC address. Only applicable to aspeed,ast2500-vuart. + + aspeed,lpc-interrupts: + $ref: "/schemas/types.yaml#/definitions/uint32-array" + minItems: 2 + maxItems: 2 + description: | + A 2-cell property describing the VUART SIRQ number and SIRQ + polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH). Only + applicable to aspeed,ast2500-vuart. required: - reg @@ -220,6 +235,7 @@ examples: }; - | #include <dt-bindings/clock/aspeed-clock.h> + #include <dt-bindings/interrupt-controller/irq.h> serial@1e787000 { compatible = "aspeed,ast2500-vuart"; reg = <0x1e787000 0x40>; @@ -227,7 +243,8 @@ examples: interrupts = <8>; clocks = <&syscon ASPEED_CLK_APB>; no-loopback-test; - aspeed,sirq-polarity-sense = <&syscon 0x70 25>; + aspeed,lpc-io-reg = <0x3f8>; + aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_LOW>; }; ... diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml new file mode 100644 index 000000000000..46c62745f901 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/brcm,bcm7271-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom 8250 based serial port devicetree bindings + +maintainers: + - Al Cooper <alcooperx@gmail.com> + +allOf: + - $ref: /schemas/serial.yaml# + +description: |+ + The Broadcom UART is based on the basic 8250 UART but with + enhancements for more accurate high speed baud rates and support + for DMA. + +properties: + compatible: + items: + - enum: + - brcm,bcm7271-uart + - brcm,bcm7278-uart + + reg: + minItems: 1 + maxItems: 5 + + reg-names: + description: The UART register block and optionally the DMA register blocks. + oneOf: + - items: + - const: uart + - items: + - const: uart + - const: dma_arb + - const: dma_rx + - const: dma_tx + - const: dma_intr2 + + clocks: + minItems: 1 + + clock-names: + const: sw_baud + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + description: The UART interrupt and optionally the DMA interrupt. + minItems: 1 + items: + - const: uart + - const: dma + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + +unevaluatedProperties: false + +examples: + - | + serial@840d000 { + compatible = "brcm,bcm7271-uart"; + reg = <0x840d000 0x20>; + reg-names = "uart"; + interrupts = <0x0 0x62 0x4>; + interrupt-names = "uart"; + clocks = <&scmi_clk 190>; + clock-names = "sw_baud"; + }; + + serial@840e000 { + compatible = "brcm,bcm7271-uart"; + reg = <0x840e000 0x20>, + <0x840e080 0x8>, + <0x840e100 0xa8>, + <0x840e200 0x4c>, + <0x840e300 0x30>; + reg-names = "uart", "dma_arb", "dma_rx", "dma_tx", "dma_intr2"; + interrupts = <0x0 0x62 0x4>, <0x0 0x75 0x4>; + interrupt-names = "uart", "dma"; + clocks = <&scmi_clk 190>; + clock-names = "sw_baud"; + }; diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml index 559213899d73..7748d8c3bab8 100644 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml @@ -91,7 +91,7 @@ examples: bluetooth { compatible = "brcm,bcm4330-bt"; reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; - vcc-supply = <&wlan0_power>; + vbat-supply = <&wlan0_power>; device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 647b5aee86f3..64c4fb59acd1 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -20,6 +20,7 @@ Required properties: * "mediatek,mt8173-uart" for MT8173 compatible UARTS * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS * "mediatek,mt8192-uart", "mediatek,mt6577-uart" for MT8192 compatible UARTS + * "mediatek,mt8195-uart", "mediatek,mt6577-uart" for MT8195 compatible UARTS * "mediatek,mt8516-uart" for MT8516 compatible UARTS * "mediatek,mt6577-uart" for MT6577 and all of the above diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 21ee627b2ced..97ec8a093bf3 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/serial/samsung_uart.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Samsung S3C, S5P and Exynos SoC UART Controller +title: Samsung S3C, S5P, Exynos, and S5L (Apple SoC) SoC UART Controller maintainers: - Krzysztof Kozlowski <krzk@kernel.org> @@ -19,6 +19,7 @@ properties: compatible: items: - enum: + - apple,s5l-uart - samsung,s3c2410-uart - samsung,s3c2412-uart - samsung,s3c2440-uart @@ -51,6 +52,16 @@ properties: - pattern: '^clk_uart_baud[0-3]$' - pattern: '^clk_uart_baud[0-3]$' + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + interrupts: description: RX interrupt and optionally TX interrupt. minItems: 1 @@ -68,9 +79,11 @@ required: - interrupts - reg -additionalProperties: false +unevaluatedProperties: false allOf: + - $ref: /schemas/serial.yaml# + - if: properties: compatible: @@ -96,6 +109,7 @@ allOf: compatible: contains: enum: + - apple,s5l-uart - samsung,exynos4210-uart then: properties: diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 65e75d040521..2fdf4ed198da 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -75,6 +75,16 @@ properties: type: boolean description: CTS and RTS pins are swapped. + rx-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + RX FIFO threshold configuration (in bytes). + + tx-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + TX FIFO threshold configuration (in bytes). + if: required: - uart-has-rtscts @@ -134,7 +144,7 @@ examples: interrupts = <1>; bluetooth { - compatible = "brcm,bcm43341-bt"; + compatible = "brcm,bcm4330-bt"; interrupt-parent = <&gpio>; interrupts = <10>; }; diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 8631678283f9..71a6426bc558 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -9,9 +9,6 @@ maintainers: title: STMicroelectronics STM32 USART bindings -allOf: - - $ref: rs485.yaml - properties: compatible: enum: @@ -40,6 +37,8 @@ properties: uart-has-rtscts: true + rx-tx-swap: true + dmas: minItems: 1 maxItems: 2 @@ -66,13 +65,46 @@ properties: linux,rs485-enabled-at-boot-time: true rs485-rx-during-tx: true -if: - required: - - st,hw-flow-ctrl -then: - properties: - cts-gpios: false - rts-gpios: false + rx-threshold: + description: + If value is set to 1, RX FIFO threshold is disabled. + enum: [1, 2, 4, 8, 12, 14, 16] + default: 8 + + tx-threshold: + description: + If value is set to 1, TX FIFO threshold is disabled. + enum: [1, 2, 4, 8, 12, 14, 16] + default: 8 + +allOf: + - $ref: rs485.yaml# + - $ref: serial.yaml# + - if: + required: + - st,hw-flow-ctrl + then: + properties: + cts-gpios: false + rts-gpios: false + - if: + properties: + compatible: + const: st,stm32-uart + then: + properties: + rx-tx-swap: false + - if: + properties: + compatible: + contains: + enum: + - st,stm32-uart + - st,stm32f7-uart + then: + properties: + rx-threshold: false + tx-threshold: false required: - compatible @@ -80,19 +112,22 @@ required: - interrupts - clocks -additionalProperties: false +additionalProperties: + type: object examples: - | #include <dt-bindings/clock/stm32mp1-clks.h> usart1: serial@40011000 { - compatible = "st,stm32-uart"; + compatible = "st,stm32h7-uart"; reg = <0x40011000 0x400>; interrupts = <37>; clocks = <&rcc 0 164>; dmas = <&dma2 2 4 0x414 0x0>, <&dma2 7 4 0x414 0x0>; dma-names = "rx", "tx"; + rx-threshold = <4>; + tx-threshold = <4>; rs485-rts-active-low; }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt index ecac2bbeae45..8051c17e640e 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -22,6 +22,7 @@ Required properties in pwrap device node. "mediatek,mt6765-pwrap" for MT6765 SoCs "mediatek,mt6779-pwrap" for MT6779 SoCs "mediatek,mt6797-pwrap" for MT6797 SoCs + "mediatek,mt6873-pwrap" for MT6873/8192 SoCs "mediatek,mt7622-pwrap" for MT7622 SoCs "mediatek,mt8135-pwrap" for MT8135 SoCs "mediatek,mt8173-pwrap" for MT8173 SoCs diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt index 19c059e44681..783dc81b0f26 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt @@ -17,6 +17,7 @@ power-domains. Value type: <string> Definition: must be one of: "qcom,sc7180-aoss-qmp" + "qcom,sc7280-aoss-qmp" "qcom,sdm845-aoss-qmp" "qcom,sm8150-aoss-qmp" "qcom,sm8250-aoss-qmp" diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt index 042a2e4159bd..1382b64e1381 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt @@ -24,6 +24,13 @@ block and a BT, WiFi and FM radio block, all using SMD as command channels. "qcom,riva", "qcom,pronto" +- firmware-name: + Usage: optional + Value type: <string> + Definition: specifies the relative firmware image path for the WLAN NV + blob. Defaults to "wlan/prima/WCNSS_qcom_wlan_nv.bin" if + not specified. + = SUBNODES The subnodes of the wcnss node are optional and describe the individual blocks in the WCNSS. diff --git a/Documentation/devicetree/bindings/sound/ak4642.yaml b/Documentation/devicetree/bindings/sound/ak4642.yaml index 6cd213be2266..1e2caa29790e 100644 --- a/Documentation/devicetree/bindings/sound/ak4642.yaml +++ b/Documentation/devicetree/bindings/sound/ak4642.yaml @@ -29,11 +29,9 @@ properties: clock-frequency: description: common clock binding; frequency of MCKO - $ref: /schemas/types.yaml#/definitions/uint32 clock-output-names: description: common clock name - $ref: /schemas/types.yaml#/definitions/string required: - compatible diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt index 36934098170c..e28708db6686 100644 --- a/Documentation/devicetree/bindings/sound/ak5558.txt +++ b/Documentation/devicetree/bindings/sound/ak5558.txt @@ -4,7 +4,7 @@ This device supports I2C mode only. Required properties: -- compatible : "asahi-kasei,ak5558" +- compatible : "asahi-kasei,ak5558" or "asahi-kasei,ak5552". - reg : The I2C address of the device. Optional properties: diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml index 766e9109b2f7..43e7f86e3b23 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml @@ -11,71 +11,59 @@ maintainers: select: false +allOf: + - $ref: /schemas/graph.yaml#/$defs/port-base + properties: - port: - description: single OF-Graph subnode - type: object + prefix: + description: "device name prefix" + $ref: /schemas/types.yaml#/definitions/string + convert-rate: + description: CPU to Codec rate convert. + $ref: /schemas/types.yaml#/definitions/uint32 + convert-channels: + description: CPU to Codec rate channels. + $ref: /schemas/types.yaml#/definitions/uint32 +patternProperties: + "^endpoint(@[0-9a-f]+)?": + $ref: /schemas/graph.yaml#/$defs/endpoint-base properties: - reg: - maxItems: 1 - prefix: - description: "device name prefix" - $ref: /schemas/types.yaml#/definitions/string + mclk-fs: + description: | + Multiplication factor between stream rate and codec mclk. + When defined, mclk-fs property defined in dai-link sub nodes are + ignored. + $ref: /schemas/types.yaml#/definitions/uint32 + frame-inversion: + description: dai-link uses frame clock inversion + $ref: /schemas/types.yaml#/definitions/flag + bitclock-inversion: + description: dai-link uses bit clock inversion + $ref: /schemas/types.yaml#/definitions/flag + frame-master: + description: Indicates dai-link frame master. + $ref: /schemas/types.yaml#/definitions/phandle + bitclock-master: + description: Indicates dai-link bit clock master + $ref: /schemas/types.yaml#/definitions/phandle + dai-format: + description: audio format. + items: + enum: + - i2s + - right_j + - left_j + - dsp_a + - dsp_b + - ac97 + - pdm + - msb + - lsb convert-rate: description: CPU to Codec rate convert. $ref: /schemas/types.yaml#/definitions/uint32 convert-channels: description: CPU to Codec rate channels. $ref: /schemas/types.yaml#/definitions/uint32 - patternProperties: - "^endpoint(@[0-9a-f]+)?": - type: object - properties: - remote-endpoint: - maxItems: 1 - mclk-fs: - description: | - Multiplication factor between stream rate and codec mclk. - When defined, mclk-fs property defined in dai-link sub nodes are - ignored. - $ref: /schemas/types.yaml#/definitions/uint32 - frame-inversion: - description: dai-link uses frame clock inversion - $ref: /schemas/types.yaml#/definitions/flag - bitclock-inversion: - description: dai-link uses bit clock inversion - $ref: /schemas/types.yaml#/definitions/flag - frame-master: - description: Indicates dai-link frame master. - $ref: /schemas/types.yaml#/definitions/phandle - bitclock-master: - description: Indicates dai-link bit clock master - $ref: /schemas/types.yaml#/definitions/phandle - dai-format: - description: audio format. - items: - enum: - - i2s - - right_j - - left_j - - dsp_a - - dsp_b - - ac97 - - pdm - - msb - - lsb - convert-rate: - description: CPU to Codec rate convert. - $ref: /schemas/types.yaml#/definitions/uint32 - convert-channels: - description: CPU to Codec rate channels. - $ref: /schemas/types.yaml#/definitions/uint32 - - ports: - description: multi OF-Graph subnode - type: object - patternProperties: - "^port(@[0-9a-f]+)?": - $ref: "#/properties/port" additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml new file mode 100644 index 000000000000..b4c190bddd84 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,rpmsg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Audio RPMSG CPU DAI Controller + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +description: | + fsl_rpmsg is a virtual audio device. Mapping to real hardware devices + are SAI, DMA controlled by Cortex M core. What we see from Linux + side is a device which provides audio service by rpmsg channel. + +properties: + compatible: + enum: + - fsl,imx7ulp-rpmsg-audio + - fsl,imx8mn-rpmsg-audio + - fsl,imx8mm-rpmsg-audio + - fsl,imx8mp-rpmsg-audio + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + clocks: + items: + - description: Peripheral clock for register access + - description: Master clock + - description: DMA clock for DMA register access + - description: Parent clock for multiple of 8kHz sample rates + - description: Parent clock for multiple of 11kHz sample rates + + clock-names: + items: + - const: ipg + - const: mclk + - const: dma + - const: pll8k + - const: pll11k + + power-domains: + description: + List of phandle and PM domain specifier as documented in + Documentation/devicetree/bindings/power/power_domain.txt + maxItems: 1 + + memory-region: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to a node describing reserved memory (System RAM memory) + The M core can't access all the DDR memory space on some platform, + So reserved a specific memory for dma buffer which M core can + access. + (see bindings/reserved-memory/reserved-memory.txt) + + audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle to a node of audio codec + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + + fsl,enable-lpa: + $ref: /schemas/types.yaml#/definitions/flag + description: enable low power audio path. + + fsl,rpmsg-out: + $ref: /schemas/types.yaml#/definitions/flag + description: | + This is a boolean property. If present, the transmitting function + will be enabled. + + fsl,rpmsg-in: + $ref: /schemas/types.yaml#/definitions/flag + description: | + This is a boolean property. If present, the receiving function + will be enabled. + +required: + - compatible + - model + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mn-clock.h> + + rpmsg_audio: rpmsg_audio { + compatible = "fsl,imx8mn-rpmsg-audio"; + model = "wm8524-audio"; + fsl,enable-lpa; + fsl,rpmsg-out; + clocks = <&clk IMX8MN_CLK_SAI3_IPG>, + <&clk IMX8MN_CLK_SAI3_ROOT>, + <&clk IMX8MN_CLK_SDMA3_ROOT>, + <&clk IMX8MN_AUDIO_PLL1_OUT>, + <&clk IMX8MN_AUDIO_PLL2_OUT>; + clock-names = "ipg", "mclk", "dma", "pll8k", "pll11k"; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml index 50449b6d1048..4454aca34d56 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml @@ -21,6 +21,10 @@ properties: - fsl,vf610-spdif - fsl,imx6sx-spdif - fsl,imx8qm-spdif + - fsl,imx8qxp-spdif + - fsl,imx8mq-spdif + - fsl,imx8mm-spdif + - fsl,imx8mn-spdif reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index 90d9e9d81624..23d83fa7609f 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -42,6 +42,8 @@ The compatible list for this generic sound card currently: "fsl,imx-audio-si476x" + "fsl,imx-audio-wm8958" + Required properties: - compatible : Contains one of entries in the compatible list. diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml index acfb9db021dc..77adbebed824 100644 --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml @@ -32,7 +32,7 @@ properties: The last one integer is the length of the shared memory. memory-region: - $ref: '/schemas/types.yaml#/definitions/phandle' + maxItems: 1 description: | Shared memory region to EC. A "shared-dma-pool". See ../reserved-memory/reserved-memory.txt for details. diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml index 6f71294909a5..803627e984f6 100644 --- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml @@ -81,6 +81,6 @@ examples: interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clock-names = "osc", "apb_clk"; clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>; - dmas = <&axi_dma0 29 &axi_dma0 33>; + dmas = <&axi_dma0 29>, <&axi_dma0 33>; dma-names = "tx", "rx"; }; diff --git a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml index 234f64a32184..81f266d66ec5 100644 --- a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml +++ b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml @@ -9,9 +9,6 @@ title: Marvel SSPA Digital Audio Interface Bindings maintainers: - Lubomir Rintel <lkundrak@v3.sk> -allOf: - - $ref: audio-graph-port.yaml# - properties: $nodename: pattern: "^audio-controller(@.*)?$" @@ -54,7 +51,8 @@ properties: - const: rx port: - type: object + $ref: audio-graph-port.yaml# + unevaluatedProperties: false properties: endpoint: diff --git a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml new file mode 100644 index 000000000000..0481315cb5f2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mchp,i2s-mcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip I2S Multi-Channel Controller + +maintainers: + - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> + +description: + The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and + supports a Time Division Multiplexed (TDM) interface with external + multi-channel audio codecs. It consists of a receiver, a transmitter and a + common clock generator that can be enabled separately to provide Adapter, + Client or Controller modes with receiver and/or transmitter active. + On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S + multi-channel is supported by using multiple data pins, output and + input, without TDM. + +properties: + "#sound-dai-cells": + const: 0 + + compatible: + enum: + - microchip,sam9x60-i2smcc + - microchip,sama7g5-i2smcc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Peripheral Bus Clock + - description: Generic Clock (Optional). Should be set mostly when Master + Mode is required. + minItems: 1 + + clock-names: + items: + - const: pclk + - const: gclk + minItems: 1 + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + microchip,tdm-data-pair: + description: + Represents the DIN/DOUT pair pins that are used to receive/send + TDM data. It is optional and it is only needed if the controller + uses the TDM mode. + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1, 2, 3] + default: 0 + +if: + properties: + compatible: + const: microchip,sam9x60-i2smcc +then: + properties: + microchip,tdm-data-pair: false + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2s@f001c000 { + #sound-dai-cells = <0>; + compatible = "microchip,sam9x60-i2smcc"; + reg = <0xf001c000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>; + dma-names = "tx", "rx"; + clocks = <&i2s_clk>, <&i2s_gclk>; + clock-names = "pclk", "gclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_default>; + }; diff --git a/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt b/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt deleted file mode 100644 index 91ec83a6faed..000000000000 --- a/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Microchip I2S Multi-Channel Controller - -Required properties: -- compatible: Should be "microchip,sam9x60-i2smcc". -- reg: Should be the physical base address of the controller and the - length of memory mapped region. -- interrupts: Should contain the interrupt for the controller. -- dmas: Should be one per channel name listed in the dma-names property, - as described in atmel-dma.txt and dma.txt files. -- dma-names: Identifier string for each DMA request line in the dmas property. - Two dmas have to be defined, "tx" and "rx". -- clocks: Must contain an entry for each entry in clock-names. - Please refer to clock-bindings.txt. -- clock-names: Should be one of each entry matching the clocks phandles list: - - "pclk" (peripheral clock) Required. - - "gclk" (generated clock) Optional (1). - -Optional properties: -- pinctrl-0: Should specify pin control groups used for this controller. -- princtrl-names: Should contain only one value - "default". - - -(1) : Only the peripheral clock is required. The generated clock is optional - and should be set mostly when Master Mode is required. - -Example: - - i2s@f001c000 { - compatible = "microchip,sam9x60-i2smcc"; - reg = <0xf001c000 0x100>; - interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(36))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(37))>; - dma-names = "tx", "rx"; - clocks = <&i2s_clk>, <&i2s_gclk>; - clock-names = "pclk", "gclk"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2s_default>; - }; diff --git a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt index 235eac8aea7b..ecd46ed8eb98 100644 --- a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt +++ b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt @@ -4,6 +4,7 @@ Required properties: - compatible : "mediatek,mt8183_mt6358_ts3a227_max98357" for MAX98357A codec "mediatek,mt8183_mt6358_ts3a227_max98357b" for MAX98357B codec "mediatek,mt8183_mt6358_ts3a227_rt1015" for RT1015 codec + "mediatek,mt8183_mt6358_ts3a227_rt1015p" for RT1015P codec - mediatek,platform: the phandle of MT8183 ASoC platform Optional properties: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml index b8645d9c38ac..5f6b37c251a8 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml @@ -17,9 +17,6 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> -allOf: - - $ref: audio-graph-port.yaml# - properties: $nodename: pattern: "^dspk@[0-9a-f]*$" @@ -59,14 +56,18 @@ properties: available instances on a Tegra SoC. ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false description: | DSPK ACIF (Audio Client Interface) port connected to the corresponding AHUB (Audio Hub) ACIF port. port@1: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false description: | DSPK DAP (Digital Audio Port) interface which can be connected to external audio codec for playback. @@ -80,7 +81,7 @@ required: - assigned-clock-parents - sound-name-prefix -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml index 7cee7722df41..19eaacc3f12a 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml @@ -17,9 +17,6 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> -allOf: - - $ref: audio-graph-port.yaml# - properties: $nodename: pattern: "^admaif@[0-9a-f]*$" @@ -41,6 +38,7 @@ properties: dma-names: true ports: + $ref: /schemas/graph.yaml#/properties/ports description: | Contains list of ACIF (Audio CIF) port nodes for ADMAIF channels. The number of port nodes depends on the number of ADMAIF channels @@ -48,6 +46,11 @@ properties: in AHUB (Audio Hub). Each port is capable of data transfers in both directions. + patternProperties: + '^port@[0-9]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + if: properties: compatible: @@ -92,7 +95,7 @@ required: - dmas - dma-names -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml index 31f3e51974bb..1118a9488345 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml @@ -17,9 +17,6 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> -allOf: - - $ref: audio-graph-port.yaml# - properties: $nodename: pattern: "^ahub@[0-9a-f]*$" @@ -60,12 +57,34 @@ properties: ranges: true ports: + $ref: /schemas/graph.yaml#/properties/ports description: | Contains list of ACIF (Audio CIF) port nodes for AHUB (Audio Hub). These are connected to ACIF interfaces of AHUB clients. Thus the number of port nodes depend on the number of clients that AHUB may have depending on the SoC revision. + patternProperties: + '^port@[0-9]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + +patternProperties: + '^i2s@[0-9a-f]+$': + type: object + + '^dmic@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-dmic.yaml# + + '^admaif@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-admaif.yaml# + + '^dspk@[0-9a-f]+$': + type: object + $ref: nvidia,tegra186-dspk.yaml# + required: - compatible - reg @@ -77,7 +96,7 @@ required: - "#size-cells" - ranges -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml index 89f4f471be24..fd275a575055 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml @@ -16,9 +16,6 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> -allOf: - - $ref: audio-graph-port.yaml# - properties: $nodename: pattern: "^dmic@[0-9a-f]*$" @@ -60,14 +57,18 @@ properties: on the maximum available instances on a Tegra SoC. ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false description: | DMIC ACIF (Audio Client Interface) port connected to the corresponding AHUB (Audio Hub) ACIF port. port@1: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false description: | DMIC DAP (Digital Audio Port) interface which can be connected to external audio codec for capture. @@ -80,7 +81,7 @@ required: - assigned-clocks - assigned-clock-parents -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index 556460332ffb..38e52e7dbb40 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -16,9 +16,6 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> -allOf: - - $ref: audio-graph-port.yaml# - properties: $nodename: pattern: "^i2s@[0-9a-f]*$" @@ -78,14 +75,18 @@ properties: on the maximum available instances on a Tegra SoC. ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false description: | I2S ACIF (Audio Client Interface) port connected to the corresponding AHUB (Audio Hub) ACIF port. port@1: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false description: | I2S DAP (Digital Audio Port) interface which can be connected to external audio codec for playback or capture. @@ -98,7 +99,7 @@ required: - assigned-clocks - assigned-clock-parents -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 2e1046513603..605de3a5847f 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -78,7 +78,6 @@ properties: clock-frequency: description: for audio_clkout0/1/2/3 - $ref: /schemas/types.yaml#/definitions/uint32-array clkout-lr-asynchronous: description: audio_clkoutn is asynchronizes with lr-clock. @@ -111,7 +110,9 @@ properties: - pattern: '^dvc\.[0-1]$' - pattern: '^clk_(a|b|c|i)$' - port: true + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false # use patternProperties to avoid naming "xxx,yyy" issue patternProperties: @@ -257,7 +258,6 @@ required: allOf: - $ref: audio-graph.yaml# - - $ref: audio-graph-port.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/rt1019.yaml b/Documentation/devicetree/bindings/sound/rt1019.yaml new file mode 100644 index 000000000000..3d5a91a942f4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt1019.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rt1019.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RT1019 Mono Class-D Audio Amplifier + +maintainers: + - jack.yu@realtek.com + +properties: + compatible: + const: realtek,rt1019 + + reg: + maxItems: 1 + description: I2C address of the device. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + rt1019: codec@28 { + compatible = "realtek,rt1019"; + reg = <0x28>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt index 9c5fadb6ac82..cd8c53d8497e 100644 --- a/Documentation/devicetree/bindings/sound/rt5682.txt +++ b/Documentation/devicetree/bindings/sound/rt5682.txt @@ -44,7 +44,7 @@ Optional properties: - realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of the particular DMIC. -- realtek,dmic-clk-driving-high : Set the high drving of the DMIC clock out. +- realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out. Pins on the device (for linking into audio routes) for RT5682: diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml index 4987eb91f2ab..55ae198220f4 100644 --- a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml +++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml @@ -46,11 +46,9 @@ properties: patternProperties: "^port@[0-9]$": - type: object - properties: - endpoint: true - required: - - endpoint + description: FIXME, Need to define what each port is. + $ref: audio-graph-port.yaml# + unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml index 228168f685cf..48ddfcbbcbae 100644 --- a/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml +++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml @@ -40,11 +40,9 @@ properties: patternProperties: "^port@[0-9]$": - type: object - properties: - endpoint: true - required: - - endpoint + description: FIXME, Need to define what each port is. + $ref: audio-graph-port.yaml# + unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt index 9796c4639262..20931a63fd64 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -1,6 +1,6 @@ Texas Instruments - tlv320aic3x Codec module -The tlv320aic3x serial control bus communicates through I2C protocols +The tlv320aic3x serial control bus communicates through both I2C and SPI bus protocols Required properties: @@ -63,7 +63,7 @@ CODEC input pins for other compatible codecs: The pins can be used in referring sound node's audio-routing property. -Example: +I2C example: #include <dt-bindings/gpio/gpio.h> @@ -78,3 +78,20 @@ tlv320aic3x: tlv320aic3x@1b { DRVDD-supply = <®ulator>; DVDD-supply = <®ulator>; }; + +SPI example: + +spi0: spi@f0000000 { + tlv320aic3x: codec@0 { + compatible = "ti,tlv320aic3x"; + reg = <0>; /* CS number */ + #sound-dai-cells = <0>; + spi-max-frequency = <1000000>; + + AVDD-supply = <®ulator>; + IOVDD-supply = <®ulator>; + DRVDD-supply = <®ulator>; + DVDD-supply = <®ulator>; + ai3x-ocmv = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt index b104be131235..b93a2b3e029d 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt +++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt @@ -54,6 +54,8 @@ board specific bus parameters. Value type: <prop-encoded-array> Definition: should specify payload transport window offset1 of each data port. Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. - qcom,ports-offset2: @@ -61,6 +63,8 @@ board specific bus parameters. Value type: <prop-encoded-array> Definition: should specify payload transport window offset2 of each data port. Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. - qcom,ports-sinterval-low: @@ -69,12 +73,16 @@ board specific bus parameters. Definition: should be sample interval low of each data port. Out ports followed by In ports. Used for Sample Interval calculation. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. - qcom,ports-word-length: Usage: optional Value type: <prop-encoded-array> Definition: should be size of payload channel sample. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. - qcom,ports-block-pack-mode: @@ -84,6 +92,8 @@ board specific bus parameters. 0 to indicate Blocks are per Channel 1 to indicate Blocks are per Port. Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. - qcom,ports-block-group-count: @@ -92,6 +102,8 @@ board specific bus parameters. Definition: should be in range 1 to 4 to indicate how many sample intervals are combined into a payload. Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. - qcom,ports-lane-control: @@ -100,6 +112,8 @@ board specific bus parameters. Definition: should be in range 0 to 7 to identify which data lane the data port uses. Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. - qcom,ports-hstart: @@ -109,6 +123,8 @@ board specific bus parameters. SoundWire Frame, i.e. left edge of the Transport sub-frame for each port. Values between 0 and 15 are valid. Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. - qcom,ports-hstop: @@ -118,6 +134,8 @@ board specific bus parameters. SoundWire Frame, i.e. the right edge of the Transport sub-frame for each port. Values between 0 and 15 are valid. Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. - qcom,dports-type: @@ -128,6 +146,8 @@ board specific bus parameters. 1 for simple ports 2 for full port Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. Note: diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 667dedefd69f..e3fb553d9180 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -90,8 +90,8 @@ examples: #address-cells = <1>; #size-cells = <0>; - ethernet-switch@0 { - compatible = "micrel,ks8995m"; + display@0 { + compatible = "lg,lg4573"; spi-max-frequency = <1000000>; reg = <0>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 06786f1b43d2..0477396e4945 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -181,22 +181,23 @@ additionalProperties: true examples: - | - spi@f00 { + spi@80010000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; - - ethernet-switch@0 { - compatible = "micrel,ks8995m"; + compatible = "fsl,imx28-spi"; + reg = <0x80010000 0x2000>; + interrupts = <96>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + + display@0 { + compatible = "lg,lg4573"; spi-max-frequency = <1000000>; reg = <0>; }; - codec@1 { - compatible = "ti,tlv320aic26"; + sensor@1 { + compatible = "bosch,bme680"; spi-max-frequency = <100000>; reg = <1>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml index c2c007260582..51c7622dc20b 100644 --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -75,16 +75,12 @@ examples: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - #address-cells = <1>; - #size-cells = <0>; spi-max-frequency = <40000000>; }; - spi-device@1 { - compatible = "lineartechnology,ltc2488"; + sensor@1 { + compatible = "bosch,bme680"; reg = <1>; - #address-cells = <1>; - #size-cells = <0>; spi-max-frequency = <10000000>; }; }; diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index d11806b1ede3..2d9af4c506bb 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -96,12 +96,6 @@ examples: dma-names = "rx", "tx"; cs-gpios = <&gpioa 11 0>; - aardvark@0 { - compatible = "totalphase,aardvark"; - reg = <0>; - spi-max-frequency = <4000000>; - st,spi-midi-ns = <4000>; - }; }; ... diff --git a/Documentation/devicetree/bindings/submitting-patches.rst b/Documentation/devicetree/bindings/submitting-patches.rst index 68129ff09967..104fa8fb2c17 100644 --- a/Documentation/devicetree/bindings/submitting-patches.rst +++ b/Documentation/devicetree/bindings/submitting-patches.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 ========================================== -Submitting devicetree (DT) binding patches +Submitting Devicetree (DT) binding patches ========================================== I. For patch submitters @@ -25,7 +25,7 @@ I. For patch submitters make dt_binding_check - See Documentation/devicetree/writing-schema.rst for more details about + See Documentation/devicetree/bindings/writing-schema.rst for more details about schema and tools setup. 3) DT binding files should be dual licensed. The preferred license tag is @@ -75,8 +75,8 @@ II. For kernel maintainers binding, and it hasn't received an Acked-by from the devicetree maintainers after a few weeks, go ahead and take it. - Subsystem bindings (anything affecting more than a single device) - then getting a devicetree maintainer to review it is required. + For subsystem bindings (anything affecting more than a single device), + getting a devicetree maintainer to review it is required. 3) For a series going though multiple trees, the binding patch should be kept with the driver using the binding. @@ -84,7 +84,7 @@ II. For kernel maintainers III. Notes ========== - 0) Please see ...bindings/ABI.txt for details regarding devicetree ABI. + 0) Please see :doc:`ABI` for details regarding devicetree ABI. 1) This document is intended as a general familiarization with the process as decided at the 2013 Kernel Summit. When in doubt, the current word of the diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt deleted file mode 100644 index 68e047170039..000000000000 --- a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt +++ /dev/null @@ -1,37 +0,0 @@ -* Broadcom Northstar Thermal - -This binding describes thermal sensor that is part of Northstar's DMU (Device -Management Unit). - -Required properties: -- compatible : Must be "brcm,ns-thermal" -- reg : iomem address range of PVTMON registers -- #thermal-sensor-cells : Should be <0> - -Example: - -thermal: thermal@1800c2c0 { - compatible = "brcm,ns-thermal"; - reg = <0x1800c2c0 0x10>; - #thermal-sensor-cells = <0>; -}; - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - coefficients = <(-556) 418000>; - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <125000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - }; - }; -}; diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml new file mode 100644 index 000000000000..fdeb333e010d --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/brcm,ns-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar Thermal + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: + Thermal sensor that is part of Northstar's DMU (Device Management Unit). + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + const: brcm,ns-thermal + + reg: + description: PVTMON registers range + maxItems: 1 + + "#thermal-sensor-cells": + const: 0 + +unevaluatedProperties: false + +required: + - reg + +examples: + - | + thermal: thermal@1800c2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x1800c2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml index 7cd364430573..3ea8c0c1f45f 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml @@ -59,7 +59,6 @@ patternProperties: properties: reg: - $ref: /schemas/types.yaml#/definitions/uint32 description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM minimum: 0 maximum: 7 @@ -78,7 +77,6 @@ patternProperties: also known as absolute calibration. qcom,hw-settle-time-us: - $ref: /schemas/types.yaml#/definitions/uint32 description: Time between AMUX getting configured and the ADC starting conversion. enum: [15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000] diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 95462e071ab4..0242fd91b622 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -19,9 +19,15 @@ description: | properties: compatible: oneOf: + - description: msm9860 TSENS based + items: + - enum: + - qcom,ipq8064-tsens + - description: v0.1 of TSENS items: - enum: + - qcom,mdm9607-tsens - qcom,msm8916-tsens - qcom,msm8939-tsens - qcom,msm8974-tsens @@ -43,6 +49,7 @@ properties: - qcom,sdm845-tsens - qcom,sm8150-tsens - qcom,sm8250-tsens + - qcom,sm8350-tsens - const: qcom,tsens-v2 reg: @@ -73,7 +80,9 @@ properties: maxItems: 2 items: - const: calib - - const: calib_sel + - enum: + - calib_backup + - calib_sel "#qcom,sensors": description: @@ -88,12 +97,21 @@ properties: Number of cells required to uniquely identify the thermal sensors. Since we have multiple sensors this is set to 1 +required: + - compatible + - interrupts + - interrupt-names + - "#thermal-sensor-cells" + - "#qcom,sensors" + allOf: - if: properties: compatible: contains: enum: + - qcom,ipq8064-tsens + - qcom,mdm9607-tsens - qcom,msm8916-tsens - qcom,msm8974-tsens - qcom,msm8976-tsens @@ -114,19 +132,44 @@ allOf: interrupt-names: minItems: 2 -required: - - compatible - - reg - - "#qcom,sensors" - - interrupts - - interrupt-names - - "#thermal-sensor-cells" + - if: + properties: + compatible: + contains: + enum: + - qcom,tsens-v0_1 + - qcom,tsens-v1 + - qcom,tsens-v2 + + then: + required: + - reg additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> + // Example msm9860 based SoC (ipq8064): + gcc: clock-controller { + + /* ... */ + + tsens: thermal-sensor { + compatible = "qcom,ipq8064-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 1 (legacy: for pre v1 IP): tsens1: thermal-sensor@900000 { compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index b33a76eeac4e..f963204e0b16 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -28,14 +28,7 @@ properties: - renesas,r8a77980-thermal # R-Car V3H - renesas,r8a779a0-thermal # R-Car V3U - reg: - minItems: 2 - maxItems: 4 - items: - - description: TSC1 registers - - description: TSC2 registers - - description: TSC3 registers - - description: TSC4 registers + reg: true interrupts: items: @@ -71,8 +64,25 @@ if: enum: - renesas,r8a779a0-thermal then: + properties: + reg: + minItems: 2 + maxItems: 3 + items: + - description: TSC1 registers + - description: TSC2 registers + - description: TSC3 registers required: - interrupts +else: + properties: + reg: + items: + - description: TSC0 registers + - description: TSC1 registers + - description: TSC2 registers + - description: TSC3 registers + - description: TSC4 registers additionalProperties: false @@ -111,3 +121,20 @@ examples: }; }; }; + - | + #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a779a0-sysc.h> + + tsc_r8a779a0: thermal@e6190000 { + compatible = "renesas,r8a779a0-thermal"; + reg = <0xe6190000 0x200>, + <0xe6198000 0x200>, + <0xe61a0000 0x200>, + <0xe61a8000 0x200>, + <0xe61b0000 0x200>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml index 9f747921e851..4bd345c71eb8 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml @@ -36,6 +36,9 @@ properties: containing several internal sensors. enum: [0, 1] +required: + - "#thermal-sensor-cells" + additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml index 2c75105c1398..7f5e3af58255 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml @@ -34,11 +34,30 @@ properties: - arm,armv8-timer interrupts: + minItems: 1 + maxItems: 5 items: - description: secure timer irq - description: non-secure timer irq - description: virtual timer irq - description: hypervisor timer irq + - description: hypervisor virtual timer irq + + interrupt-names: + oneOf: + - minItems: 2 + items: + - const: phys + - const: virt + - const: hyp-phys + - const: hyp-virt + - minItems: 3 + items: + - const: sec-phys + - const: phys + - const: virt + - const: hyp-phys + - const: hyp-virt clock-frequency: description: The frequency of the main counter, in Hz. Should be present diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml index 024bcad75101..8165df4599cf 100644 --- a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml @@ -20,6 +20,8 @@ select: enum: - ingenic,jz4740-tcu - ingenic,jz4725b-tcu + - ingenic,jz4760-tcu + - ingenic,jz4760b-tcu - ingenic,jz4770-tcu - ingenic,jz4780-tcu - ingenic,x1000-tcu @@ -52,12 +54,15 @@ properties: - enum: - ingenic,jz4740-tcu - ingenic,jz4725b-tcu - - ingenic,jz4770-tcu + - ingenic,jz4760-tcu - ingenic,x1000-tcu - const: simple-mfd - items: - - const: ingenic,jz4780-tcu - - const: ingenic,jz4770-tcu + - enum: + - ingenic,jz4780-tcu + - ingenic,jz4770-tcu + - ingenic,jz4760b-tcu + - const: ingenic,jz4760-tcu - const: simple-mfd reg: @@ -118,6 +123,8 @@ patternProperties: - items: - enum: - ingenic,jz4770-watchdog + - ingenic,jz4760b-watchdog + - ingenic,jz4760-watchdog - ingenic,jz4725b-watchdog - const: ingenic,jz4740-watchdog @@ -147,6 +154,8 @@ patternProperties: - ingenic,jz4725b-pwm - items: - enum: + - ingenic,jz4760-pwm + - ingenic,jz4760b-pwm - ingenic,jz4770-pwm - ingenic,jz4780-pwm - const: ingenic,jz4740-pwm @@ -183,10 +192,15 @@ patternProperties: oneOf: - enum: - ingenic,jz4725b-ost - - ingenic,jz4770-ost + - ingenic,jz4760b-ost - items: - - const: ingenic,jz4780-ost - - const: ingenic,jz4770-ost + - const: ingenic,jz4760-ost + - const: ingenic,jz4725b-ost + - items: + - enum: + - ingenic,jz4780-ost + - ingenic,jz4770-ost + - const: ingenic,jz4760b-ost reg: maxItems: 1 @@ -226,7 +240,7 @@ examples: #include <dt-bindings/clock/jz4770-cgu.h> #include <dt-bindings/clock/ingenic,tcu.h> tcu: timer@10002000 { - compatible = "ingenic,jz4770-tcu", "simple-mfd"; + compatible = "ingenic,jz4770-tcu", "ingenic,jz4760-tcu", "simple-mfd"; reg = <0x10002000 0x1000>; #address-cells = <1>; #size-cells = <1>; @@ -272,7 +286,7 @@ examples: }; ost: timer@e0 { - compatible = "ingenic,jz4770-ost"; + compatible = "ingenic,jz4770-ost", "ingenic,jz4760b-ost"; reg = <0xe0 0x20>; clocks = <&tcu TCU_CLK_OST>; diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt index 690a9c0966ac..e5c57d6e0186 100644 --- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -23,6 +23,7 @@ Required properties: For those SoCs that use SYST * "mediatek,mt8183-timer" for MT8183 compatible timers (SYST) * "mediatek,mt8192-timer" for MT8192 compatible timers (SYST) + * "mediatek,mt8195-timer" for MT8195 compatible timers (SYST) * "mediatek,mt7629-timer" for MT7629 compatible timers (SYST) * "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST) diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt index 97258f1a1505..ac3a5e887455 100644 --- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt @@ -4,7 +4,8 @@ Nuvoton NPCM7xx have three timer modules, each timer module provides five 24-bit timer counters. Required properties: -- compatible : "nuvoton,npcm750-timer" for Poleg NPCM750. +- compatible : "nuvoton,npcm750-timer" for Poleg NPCM750, or + "nuvoton,wpcm450-timer" for Hermon WPCM450. - reg : Offset and length of the register set for the device. - interrupts : Contain the timer interrupt of timer 0. - clocks : phandle of timer reference clock (usually a 25 MHz clock). diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml index 428db3a21bb9..53dd6d9f518f 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml @@ -74,11 +74,13 @@ properties: - renesas,r8a774e1-cmt0 # 32-bit CMT0 on RZ/G2H - renesas,r8a7795-cmt0 # 32-bit CMT0 on R-Car H3 - renesas,r8a7796-cmt0 # 32-bit CMT0 on R-Car M3-W + - renesas,r8a77961-cmt0 # 32-bit CMT0 on R-Car M3-W+ - renesas,r8a77965-cmt0 # 32-bit CMT0 on R-Car M3-N - renesas,r8a77970-cmt0 # 32-bit CMT0 on R-Car V3M - renesas,r8a77980-cmt0 # 32-bit CMT0 on R-Car V3H - renesas,r8a77990-cmt0 # 32-bit CMT0 on R-Car E3 - renesas,r8a77995-cmt0 # 32-bit CMT0 on R-Car D3 + - renesas,r8a779a0-cmt0 # 32-bit CMT0 on R-Car V3U - const: renesas,rcar-gen3-cmt0 # 32-bit CMT0 on R-Car Gen3 and RZ/G2 - items: @@ -89,11 +91,13 @@ properties: - renesas,r8a774e1-cmt1 # 48-bit CMT on RZ/G2H - renesas,r8a7795-cmt1 # 48-bit CMT on R-Car H3 - renesas,r8a7796-cmt1 # 48-bit CMT on R-Car M3-W + - renesas,r8a77961-cmt1 # 48-bit CMT on R-Car M3-W+ - renesas,r8a77965-cmt1 # 48-bit CMT on R-Car M3-N - renesas,r8a77970-cmt1 # 48-bit CMT on R-Car V3M - renesas,r8a77980-cmt1 # 48-bit CMT on R-Car V3H - renesas,r8a77990-cmt1 # 48-bit CMT on R-Car E3 - renesas,r8a77995-cmt1 # 48-bit CMT on R-Car D3 + - renesas,r8a779a0-cmt1 # 48-bit CMT on R-Car V3U - const: renesas,rcar-gen3-cmt1 # 48-bit CMT on R-Car Gen3 and RZ/G2 reg: diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml index c54188731a1b..f0f0f121c355 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml @@ -28,8 +28,14 @@ properties: - renesas,tmu-r8a774e1 # RZ/G2H - renesas,tmu-r8a7778 # R-Car M1A - renesas,tmu-r8a7779 # R-Car H1 + - renesas,tmu-r8a7795 # R-Car H3 + - renesas,tmu-r8a7796 # R-Car M3-W + - renesas,tmu-r8a77961 # R-Car M3-W+ + - renesas,tmu-r8a77965 # R-Car M3-N - renesas,tmu-r8a77970 # R-Car V3M - renesas,tmu-r8a77980 # R-Car V3H + - renesas,tmu-r8a77990 # R-Car E3 + - renesas,tmu-r8a77995 # R-Car D3 - const: renesas,tmu reg: diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index a327130d1faa..8341e9d23c1e 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -23,6 +23,9 @@ properties: maxItems: 1 interrupts: maxItems: 1 + + spi-max-frequency: true + compatible: items: - enum: @@ -50,6 +53,8 @@ properties: - atmel,atsha204a # i2c h/w elliptic curve crypto module - atmel,atecc508a + # BPA-RS600: Power Supply + - blutek,bpa-rs600 # Bosch Sensortec pressure, temperature, humididty and VOC sensor - bosch,bme680 # CM32181: Ambient Light Sensor @@ -102,6 +107,8 @@ properties: - mps,mp2975 # G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface - gmt,g751 + # Infineon IR36021 digital POL buck controller + - infineon,ir36021 # Infineon IR38064 Voltage Regulator - infineon,ir38064 # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) @@ -288,6 +295,8 @@ properties: - ti,tmp103 # Digital Temperature Sensor - ti,tmp275 + # TI Dual channel DCAP+ multiphase controller TPS53676 with AVSBus + - ti,tps53676 # TI Dual channel DCAP+ multiphase controller TPS53679 - ti,tps53679 # TI Dual channel DCAP+ multiphase controller TPS53688 diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index 415ccdd7442d..d8fd4df81743 100644 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt @@ -14,6 +14,8 @@ Required properties: "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0" "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0" "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0" + "qcom,sm8250-ufshc", "qcom,ufshc", "jedec,ufs-2.0" + "qcom,sm8350-ufshc", "qcom,ufshc", "jedec,ufs-2.0" - interrupts : <interrupt mapping for UFS host controller IRQ> - reg : <registers mapping> diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt index a668f43bedf5..04813a46e5d0 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt @@ -1,32 +1,56 @@ Xilinx SuperSpeed DWC3 USB SoC controller Required properties: -- compatible: Should contain "xlnx,zynqmp-dwc3" +- compatible: May contain "xlnx,zynqmp-dwc3" or "xlnx,versal-dwc3" +- reg: Base address and length of the register control block - clocks: A list of phandles for the clocks listed in clock-names - clock-names: Should contain the following: "bus_clk" Master/Core clock, have to be >= 125 MHz for SS operation and >= 60MHz for HS operation "ref_clk" Clock source to core during PHY power down +- resets: A list of phandles for resets listed in reset-names +- reset-names: + "usb_crst" USB core reset + "usb_hibrst" USB hibernation reset + "usb_apbrst" USB APB reset Required child node: A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. +Optional properties for snps,dwc3: +- dma-coherent: Enable this flag if CCI is enabled in design. Adding this + flag configures Global SoC bus Configuration Register and + Xilinx USB 3.0 IP - USB coherency register to enable CCI. +- interrupt-names: Should contain the following: + "dwc_usb3" USB gadget mode interrupts + "otg" USB OTG mode interrupts + "hiber" USB hibernation interrupts + Example device node: usb@0 { #address-cells = <0x2>; #size-cells = <0x1>; compatible = "xlnx,zynqmp-dwc3"; + reg = <0x0 0xff9d0000 0x0 0x100>; clock-names = "bus_clk", "ref_clk"; clocks = <&clk125>, <&clk125>; + resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>, + <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>, + <&zynqmp_reset ZYNQMP_RESET_USB1_APB>; + reset-names = "usb_crst", "usb_hibrst", "usb_apbrst"; ranges; dwc3@fe200000 { compatible = "snps,dwc3"; reg = <0x0 0xfe200000 0x40000>; - interrupts = <0x0 0x41 0x4>; + interrupt-names = "dwc_usb3", "otg", "hiber"; + interrupts = <0 65 4>, <0 69 4>, <0 75 4>; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; + phy-names = "usb3-phy"; dr_mode = "host"; + dma-coherent; }; }; diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml index cb4c6f6d3a33..974032b1fda0 100644 --- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml @@ -52,11 +52,8 @@ properties: # Required child node: patternProperties: - "^dwc3@[0-9a-f]+$": - type: object - description: - A child node must exist to represent the core DWC3 IP block - The content of the node is defined in dwc3.txt. + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# required: - compatible @@ -87,7 +84,7 @@ examples: dma-ranges = <0x40000000 0x40000000 0xc0000000>; ranges; - dwc3@38100000 { + usb@38100000 { compatible = "snps,dwc3"; reg = <0x38100000 0x10000>; clocks = <&clk IMX8MP_CLK_HSIO_AXI>, diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index cf83f2d9afac..8089dc956ba3 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -122,6 +122,12 @@ properties: description: Set this flag to force EHCI reset after resume. + spurious-oc: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set this flag to indicate that the hardware sometimes turns on + the OC bit when an over-current isn't actually present. + companion: $ref: /schemas/types.yaml#/definitions/phandle description: diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml index 14f40efb3b22..240882b12565 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -30,6 +30,7 @@ properties: - mediatek,mt7629-xhci - mediatek,mt8173-xhci - mediatek,mt8183-xhci + - mediatek,mt8192-xhci - const: mediatek,mtk-xhci reg: @@ -45,7 +46,18 @@ properties: - const: ippc # optional, only needed for case 1. interrupts: - maxItems: 1 + description: + use "interrupts-extended" when the interrupts are connected to the + separate interrupt controllers + minItems: 1 + items: + - description: xHCI host controller interrupt + - description: optional, wakeup interrupt used to support runtime PM + + interrupt-names: + items: + - const: host + - const: wakeup power-domains: description: A phandle to USB power domain node to control USB's MTCMOS @@ -99,9 +111,9 @@ properties: vbus-supply: description: Regulator of USB VBUS5v - usb3-lpm-capable: - description: supports USB3.0 LPM - type: boolean + usb3-lpm-capable: true + + usb2-lpm-disable: true imod-interval-ns: description: @@ -127,10 +139,13 @@ properties: - description: The second cell represents the register base address of the glue layer in syscon - - description: + - description: | The third cell represents the hardware version of the glue layer, - 1 is used by mt8173 etc, 2 is used by mt2712 etc - enum: [1, 2] + 1 - used by mt8173 etc, revision 1 without following IPM rule; + 2 - used by mt2712 etc, revision 2 following IPM rule; + 101 - used by mt8183, specific 1.01; + 102 - used by mt8192, specific 1.02; + enum: [1, 2, 101, 102] mediatek,u3p-dis-msk: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml index f5c04b9d2de9..dbc7876e0a0b 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml @@ -24,6 +24,7 @@ properties: - mediatek,mt2712-mtu3 - mediatek,mt8173-mtu3 - mediatek,mt8183-mtu3 + - mediatek,mt8192-mtu3 - const: mediatek,mtu3 reg: @@ -126,7 +127,7 @@ properties: Any connector to the data bus of this controller should be modelled using the OF graph bindings specified, if the "usb-role-switch" property is used. See graph.txt - type: object + $ref: /schemas/graph.yaml#/properties/port enable-manual-drd: $ref: /schemas/types.yaml#/definitions/flag @@ -152,10 +153,13 @@ properties: - description: The second cell represents the register base address of the glue layer in syscon - - description: + - description: | The third cell represents the hardware version of the glue layer, - 1 is used by mt8173 etc, 2 is used by mt2712 etc - enum: [1, 2] + 1 - used by mt8173 etc, revision 1 without following IPM rule; + 2 - used by mt2712 etc, revision 2 with following IPM rule; + 101 - used by mt8183, specific 1.01; + 102 - used by mt8192, specific 1.02; + enum: [1, 2, 101, 102] mediatek,u3p-dis-msk: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index c3cbd1fa9944..413299b5fe2b 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -16,6 +16,7 @@ properties: - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 - qcom,sc7180-dwc3 + - qcom,sc7280-dwc3 - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 - qcom,sm8150-dwc3 diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 2247da77eac1..41416fbd92aa 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -87,13 +87,19 @@ properties: minItems: 1 snps,usb2-lpm-disable: - description: Indicate if we don't want to enable USB2 HW LPM + description: Indicate if we don't want to enable USB2 HW LPM for host + mode. type: boolean snps,usb3_lpm_capable: description: Determines if platform is USB3 LPM capable type: boolean + snps,usb2-gadget-lpm-disable: + description: Indicate if we don't want to enable USB2 HW LPM for gadget + mode. + type: boolean + snps,dis-start-transfer-quirk: description: When set, disable isoc START TRANSFER command failure SW work-around diff --git a/Documentation/devicetree/bindings/usb/usb-device.yaml b/Documentation/devicetree/bindings/usb/usb-device.yaml index d4c99809ee9a..b77960a7a37b 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.yaml +++ b/Documentation/devicetree/bindings/usb/usb-device.yaml @@ -82,9 +82,9 @@ required: additionalProperties: true examples: - #hub connected to port 1 - #device connected to port 2 - #device connected to port 3 + # hub connected to port 1 + # device connected to port 2 + # device connected to port 3 # interface 0 of configuration 1 # interface 0 of configuration 2 - | diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt deleted file mode 100644 index 4dc6a8ee3071..000000000000 --- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt +++ /dev/null @@ -1,43 +0,0 @@ -USB NOP PHY - -Required properties: -- compatible: should be usb-nop-xceiv -- #phy-cells: Must be 0 - -Optional properties: -- clocks: phandle to the PHY clock. Use as per Documentation/devicetree - /bindings/clock/clock-bindings.txt - This property is required if clock-frequency is specified. - -- clock-names: Should be "main_clk" - -- clock-frequency: the clock frequency (in Hz) that the PHY clock must - be configured to. - -- vcc-supply: phandle to the regulator that provides power to the PHY. - -- reset-gpios: Should specify the GPIO for reset. - -- vbus-detect-gpio: should specify the GPIO detecting a VBus insertion - (see Documentation/devicetree/bindings/gpio/gpio.txt) -- vbus-regulator : should specifiy the regulator supplying current drawn from - the VBus line (see Documentation/devicetree/bindings/regulator/regulator.txt). - -Example: - - hsusb1_phy { - compatible = "usb-nop-xceiv"; - clock-frequency = <19200000>; - clocks = <&osc 0>; - clock-names = "main_clk"; - vcc-supply = <&hsusb1_vcc_regulator>; - reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; - vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; - vbus-regulator = <&vbus_regulator>; - #phy-cells = <0>; - }; - -hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator -and expects that clock to be configured to 19.2MHz by the NOP PHY driver. -hsusb1_vcc_regulator provides power to the PHY and GPIO 7 controls RESET. -GPIO 13 detects VBus insertion, and accordingly notifies the vbus-regulator. diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml new file mode 100644 index 000000000000..2824c17285ee --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-nop-xceiv.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB NOP PHY + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + compatible: + const: usb-nop-xceiv + + clocks: + maxItems: 1 + + clock-names: + const: main_clk + + clock-frequency: true + + '#phy-cells': + const: 0 + + vcc-supply: + description: phandle to the regulator that provides power to the PHY. + + reset-gpios: + maxItems: 1 + + vbus-detect-gpio: + description: Should specify the GPIO detecting a VBus insertion + maxItems: 1 + + vbus-regulator: + description: Should specifiy the regulator supplying current drawn from + the VBus line. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + hsusb1_phy { + compatible = "usb-nop-xceiv"; + clock-frequency = <19200000>; + clocks = <&osc 0>; + clock-names = "main_clk"; + vcc-supply = <&hsusb1_vcc_regulator>; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + vbus-regulator = <&vbus_regulator>; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml index 78491e66ed24..939f217b8c7b 100644 --- a/Documentation/devicetree/bindings/usb/usb.yaml +++ b/Documentation/devicetree/bindings/usb/usb.yaml @@ -16,7 +16,6 @@ properties: pattern: "^usb(@.*)?" phys: - $ref: /schemas/types.yaml#/definitions/phandle-array description: List of all the USB PHYs on this HCD diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index f6064d84a424..b868cefc7c55 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -57,6 +57,8 @@ patternProperties: description: Advantech Corporation "^aeroflexgaisler,.*": description: Aeroflex Gaisler AB + "^aesop,.*": + description: AESOP Embedded Forum "^al,.*": description: Annapurna Labs "^alcatel,.*": @@ -103,6 +105,8 @@ patternProperties: description: Anvo-Systems Dresden GmbH "^apm,.*": description: Applied Micro Circuits Corporation (APM) + "^apple,.*": + description: Apple Inc. "^aptina,.*": description: Aptina Imaging "^arasan,.*": @@ -169,6 +173,8 @@ patternProperties: description: Beckhoff Automation GmbH & Co. KG "^bitmain,.*": description: Bitmain Technologies + "^blutek,.*": + description: BluTek Power "^boe,.*": description: BOE Technology Group Co., Ltd. "^bosch,.*": @@ -489,6 +495,8 @@ patternProperties: description: Shenzhen Hugsun Technology Co. Ltd. "^hwacom,.*": description: HwaCom Systems Inc. + "^hycon,.*": + description: Hycon Technology Corp. "^hydis,.*": description: Hydis Technologies "^hyundai,.*": @@ -651,6 +659,8 @@ patternProperties: description: Liebherr-Werk Nenzing GmbH "^lxa,.*": description: Linux Automation GmbH + "^m5stack,.*": + description: M5Stack "^macnica,.*": description: Macnica Americas "^mantix,.*": @@ -764,6 +774,8 @@ patternProperties: description: Broadcom Corporation (formerly NetLogic Microsystems) "^netron-dy,.*": description: Netron DY + "^netronix,.*": + description: Netronix, Inc. "^netxeon,.*": description: Shenzhen Netxeon Technology CO., LTD "^neweast,.*": @@ -932,6 +944,8 @@ patternProperties: description: Unisoc Communications, Inc. "^realtek,.*": description: Realtek Semiconductor Corp. + "^remarkable,.*": + description: reMarkable AS "^renesas,.*": description: Renesas Electronics Corporation "^rex,.*": @@ -1022,8 +1036,12 @@ patternProperties: description: Silergy Corp. "^silex-insight,.*": description: Silex Insight + "^siliconfile,.*": + description: Siliconfile Technologies lnc. "^siliconmitus,.*": description: Silicon Mitus, Inc. + "^siemens,.*": + description: Siemens AG "^simtek,.*": description: Cypress Semiconductor Corporation (Simtek Corporation) "^sinlinx,.*": @@ -1085,6 +1103,8 @@ patternProperties: description: Shenzhen Sunchip Technology Co., Ltd "^SUNW,.*": description: Sun Microsystems, Inc + "^supermicro,.*": + description: Super Micro Computer, Inc. "^silvaco,.*": description: Silvaco, Inc. "^swir,.*": @@ -1101,6 +1121,8 @@ patternProperties: description: Trusted Computing Group "^tcl,.*": description: Toby Churchill Ltd. + "^tcs,.*": + description: Shenzhen City Tang Cheng Technology Co., Ltd. "^tdo,.*": description: Shangai Top Display Optoelectronics Co., Ltd "^technexion,.*": @@ -1268,6 +1290,8 @@ patternProperties: description: Yamaha Corporation "^yes-optoelectronics,.*": description: Yes Optoelectronics Co.,Ltd. + "^yic,.*": + description: YIC System Co., Ltd. "^ylm,.*": description: Shenzhen Yangliming Electronic Technology Co., Ltd. "^yna,.*": diff --git a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt index 6d593003c933..9059f54dc023 100644 --- a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt @@ -5,7 +5,8 @@ The watchdog supports a pre-timeout interrupt that fires 10ms before the expiry. Required properties: -- compatible : "nuvoton,npcm750-wdt" for NPCM750 (Poleg). +- compatible : "nuvoton,npcm750-wdt" for NPCM750 (Poleg), or + "nuvoton,wpcm450-wdt" for WPCM450 (Hermon). - reg : Offset and length of the register set for the device. - interrupts : Contain the timer interrupt with flags for falling edge. diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst new file mode 100644 index 000000000000..23d6579aea2c --- /dev/null +++ b/Documentation/devicetree/bindings/writing-schema.rst @@ -0,0 +1,183 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Writing Devicetree Bindings in json-schema +========================================== + +Devicetree bindings are written using json-schema vocabulary. Schema files are +written in a JSON compatible subset of YAML. YAML is used instead of JSON as it +is considered more human readable and has some advantages such as allowing +comments (Prefixed with '#'). + +Also see :ref:`example-schema`. + +Schema Contents +--------------- + +Each schema doc is a structured json-schema which is defined by a set of +top-level properties. Generally, there is one binding defined per file. The +top-level json-schema properties used are: + +$id + A json-schema unique identifier string. The string must be a valid + URI typically containing the binding's filename and path. For DT schema, it must + begin with "http://devicetree.org/schemas/". The URL is used in constructing + references to other files specified in schema "$ref" properties. A $ref value + with a leading '/' will have the hostname prepended. A $ref value a relative + path or filename only will be prepended with the hostname and path components + of the current schema file's '$id' value. A URL is used even for local files, + but there may not actually be files present at those locations. + +$schema + Indicates the meta-schema the schema file adheres to. + +title + A one line description on the contents of the binding schema. + +maintainers + A DT specific property. Contains a list of email address(es) + for maintainers of this binding. + +description + Optional. A multi-line text block containing any detailed + information about this binding. It should contain things such as what the block + or device does, standards the device conforms to, and links to datasheets for + more information. + +select + Optional. A json-schema used to match nodes for applying the + schema. By default without 'select', nodes are matched against their possible + compatible string values or node name. Most bindings should not need select. + +allOf + Optional. A list of other schemas to include. This is used to + include other schemas the binding conforms to. This may be schemas for a + particular class of devices such as I2C or SPI controllers. + +properties + A set of sub-schema defining all the DT properties for the + binding. The exact schema syntax depends on whether properties are known, + common properties (e.g. 'interrupts') or are binding/vendor specific properties. + +A property can also define a child DT node with child properties defined +under it. + +For more details on properties sections, see 'Property Schema' section. + +patternProperties + Optional. Similar to 'properties', but names are regex. + +required + A list of DT properties from the 'properties' section that + must always be present. + +examples + Optional. A list of one or more DTS hunks implementing the + binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead. + +Unless noted otherwise, all properties are required. + +Property Schema +--------------- + +The 'properties' section of the schema contains all the DT properties for a +binding. Each property contains a set of constraints using json-schema +vocabulary for that property. The properties schemas are what is used for +validation of DT files. + +For common properties, only additional constraints not covered by the common +binding schema need to be defined such as how many values are valid or what +possible values are valid. + +Vendor specific properties will typically need more detailed schema. With the +exception of boolean properties, they should have a reference to a type in +schemas/types.yaml. A "description" property is always required. + +The Devicetree schemas don't exactly match the YAML encoded DT data produced by +dtc. They are simplified to make them more compact and avoid a bunch of +boilerplate. The tools process the schema files to produce the final schema for +validation. There are currently 2 transformations the tools perform. + +The default for arrays in json-schema is they are variable sized and allow more +entries than explicitly defined. This can be restricted by defining 'minItems', +'maxItems', and 'additionalItems'. However, for DeviceTree Schemas, a fixed +size is desired in most cases, so these properties are added based on the +number of entries in an 'items' list. + +The YAML Devicetree format also makes all string values an array and scalar +values a matrix (in order to define groupings) even when only a single value +is present. Single entries in schemas are fixed up to match this encoding. + +Testing +------- + +Dependencies +~~~~~~~~~~~~ + +The DT schema project must be installed in order to validate the DT schema +binding documents and validate DTS files using the DT schema. The DT schema +project can be installed with pip:: + + pip3 install git+https://github.com/devicetree-org/dt-schema.git@master + +Several executables (dt-doc-validate, dt-mk-schema, dt-validate) will be +installed. Ensure they are in your PATH (~/.local/bin by default). + +dtc must also be built with YAML output support enabled. This requires that +libyaml and its headers be installed on the host system. For some distributions +that involves installing the development package, such as: + +Debian:: + + apt-get install libyaml-dev + +Fedora:: + + dnf -y install libyaml-devel + +Running checks +~~~~~~~~~~~~~~ + +The DT schema binding documents must be validated using the meta-schema (the +schema for the schema) to ensure they are both valid json-schema and valid +binding schema. All of the DT binding documents can be validated using the +``dt_binding_check`` target:: + + make dt_binding_check + +In order to perform validation of DT source files, use the ``dtbs_check`` target:: + + make dtbs_check + +Note that ``dtbs_check`` will skip any binding schema files with errors. It is +necessary to use ``dt_binding_check`` to get all the validation errors in the +binding schema files. + +It is possible to run both in a single command:: + + make dt_binding_check dtbs_check + +It is also possible to run checks with a single schema file by setting the +``DT_SCHEMA_FILES`` variable to a specific schema file. + +:: + + make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml + make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml + + +json-schema Resources +--------------------- + + +`JSON-Schema Specifications <http://json-schema.org/>`_ + +`Using JSON Schema Book <http://usingjsonschema.com/>`_ + +.. _example-schema: + +Annotated Example Schema +------------------------ + +Also available as a separate file: :download:`example-schema.yaml` + +.. literalinclude:: example-schema.yaml |