Merge tag 'mmc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC and MEMSTICK updates from Ulf Hansson:
 "MMC core:
   - A few minor improvements and cleanups

  MMC host:
   - Remove some redundant calls to local_irq_{save,restore}()
   - Replace kmap_atomic() with kmap_local_page()
   - Take return values from mmc_add_host() into account
   - dw_mmc-pltfm: Add support to configure clk-phase for socfpga
   - hsq: Minimize latency by using a fifo to dispatch requests
   - litex_mmc: Fixup corner case for polling mode
   - mtk-sd: Add inline crypto engine clock control
   - mtk-sd: Add support for the mediatek MT7986 variant
   - renesas_sdhi: Improve reset from HS400 mode
   - renesas_sdhi: Take DMA end interrupts into account
   - sdhci: Avoid unnecessary update of clock
   - sdhci: Fix an SD tuning issue
   - sdhci-brcmst: Add Kamal Dasu as maintainer for the Broadcom driver
   - sdhci-esdhc-imx: Improve tuning logic
   - sdhci-esdhc-imx: Improve support for the imxrt1050 variant
   - sdhci_f_sdh30: Add support for non-removable media
   - sdhci_f_sdh30: Add support for the Socionext F_SDH30_E51 variant
   - sdhci_f_sdh30: Add reset control support
   - sdhci-msm: Add support for the Qcom SM8550/SM8350/SM6375 variants
   - sdhci-msm: Add support for the Qcom MSM8976 variant
   - sdhci-of-arasan: Add support for dynamic configuration
   - sdhci-of-esdhc: Limit the clock frequency to confirm to spec
   - sdhci-pci: Enable asynchronous probe
   - sdhci-sprd: Improve card detection
   - sdhci-tegra: Improve reset support
   - sdhci-tegra: Add support to program MC stream ID
   - sunplus-mmc: Add new mmc driver for the Sunplus SP7021 controller
   - vub300: Fix warning splat for SDIO irq

  MEMSTICK core:
   - memstick: A few minor improvements and cleanups

  CLK/IOMMU:
   - clk: socfpga: Drop redundant support for clk-phase for the SD/MMC clk
   - iommu: Add tegra specific helper to get stream_id"

* tag 'mmc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits)
  mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K
  mmc: sdhci-of-esdhc: Modify mismatched function name
  memstick/mspro_block: Convert to use sysfs_emit()/sysfs_emit_at() APIs
  mmc: sdhci-tegra: Issue CMD and DAT resets together
  mmc: sdhci-tegra: Add support to program MC stream ID
  mmc: sdhci-tegra: Separate Tegra194 and Tegra234 SoC data
  mmc: sdhci-tegra: Sort includes alphabetically
  iommu/tegra: Add tegra_dev_iommu_get_stream_id() helper
  iommu: Add note about struct iommu_fwspec usage
  mmc: sdhci-brcmstb: Resolve "unused" warnings with CONFIG_OF=n
  dt-bindings: mmc: sdhci-msm: allow dma-coherent
  dt-bindings: mmc: sdhci-msm: drop properties mentioned in common MMC
  dt-bindings: mmc: sdhci-msm: cleanup style
  dt-bindings: mmc: sdhci-am654: cleanup style
  dt-bindings: mmc: sdhci: document sdhci-caps and sdhci-caps-mask
  mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
  MAINTAINERS: Update maintainer for SDHCI Broadcom BRCMSTB driver
  mmc: sdhci-of-esdhc: limit the SDHC clock frequency
  mmc: sdhci: Remove unneeded semicolon
  mmc: core: Normalize the error handling branch in sd_read_ext_regs()
  ...

15 files changed, 392 insertions, 121 deletions

diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 1e69a5a42439..1c96da04f0e5 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -95,7 +95,9 @@ properties:
       PIO (polled I/O) interrupt and occurs when the FIFO needs to be
       emptied as part of a bulk read from the card. Some variants have these
       two interrupts wired into the same line (logic OR) and in that case
-      only one interrupt may be provided.
+      only one interrupt may be provided. The interrupt-names property is
+      not used due to inconsistency of existing DTs regarding its content.
+    deprecated: false
     minItems: 1
     maxItems: 2
 
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index 0e7833478869..dc6256f04b42 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -50,11 +50,11 @@ properties:
           - const: fsl,imx8mm-usdhc
       - items:
           - enum:
+              - fsl,imx8dxl-usdhc
               - fsl,imx8qm-usdhc
           - const: fsl,imx8qxp-usdhc
       - items:
           - enum:
-              - fsl,imx8dxl-usdhc
               - fsl,imx8mm-usdhc
               - fsl,imx8mn-usdhc
               - fsl,imx8mp-usdhc
@@ -71,6 +71,7 @@ properties:
         deprecated: true
       - items:
           - enum:
+              - fsl,imx8dxl-usdhc
               - fsl,imx8qm-usdhc
           - const: fsl,imx8qxp-usdhc
           - const: fsl,imx7d-usdhc
diff --git a/Documentation/devicetree/bindings/mmc/fujitsu,sdhci-fujitsu.yaml b/Documentation/devicetree/bindings/mmc/fujitsu,sdhci-fujitsu.yaml
new file mode 100644
index 000000000000..73d747e917f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fujitsu,sdhci-fujitsu.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fujitsu,sdhci-fujitsu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fujitsu/Socionext SDHCI controller (F_SDH30)
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fujitsu,mb86s70-sdhci-3.0
+      - socionext,f-sdh30-e51-mmc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  resets:
+    maxItems: 1
+
+  fujitsu,cmd-dat-delay-select:
+    type: boolean
+    description: |
+      Indicating that this host requires the CMD_DAT_DELAY control to be enabled
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    sdhci1: mmc@36600000 {
+        compatible = "fujitsu,mb86s70-sdhci-3.0";
+        reg = <0x36600000 0x1000>;
+        bus-width = <4>;
+        vqmmc-supply = <&vccq_sdhci1>;
+        clocks = <&clock 2 2 0>, <&clock 2 3 0>;
+        clock-names = "iface", "core";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 802e3ca8be4d..e82c00368088 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -293,7 +293,6 @@ properties:
     description:
       SDIO only. Preserves card power during a suspend/resume cycle.
 
-  # Deprecated: enable-sdio-wakeup
   wakeup-source:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
index d8e1e2e9adf2..8ed94a12a03b 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -10,9 +10,6 @@ maintainers:
   - Chaotian Jing <chaotian.jing@mediatek.com>
   - Wenbin Mei <wenbin.mei@mediatek.com>
 
-allOf:
-  - $ref: mmc-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -23,6 +20,7 @@ properties:
           - mediatek,mt6795-mmc
           - mediatek,mt7620-mmc
           - mediatek,mt7622-mmc
+          - mediatek,mt7986-mmc
           - mediatek,mt8135-mmc
           - mediatek,mt8173-mmc
           - mediatek,mt8183-mmc
@@ -48,27 +46,11 @@ properties:
     description:
       Should contain phandle for the clock feeding the MMC controller.
     minItems: 2
-    items:
-      - description: source clock (required).
-      - description: HCLK which used for host (required).
-      - description: independent source clock gate (required for MT2712).
-      - description: bus clock used for internal register access (required for MT2712 MSDC0/3).
-      - description: msdc subsys clock gate (required for MT8192).
-      - description: peripheral bus clock gate (required for MT8192).
-      - description: AXI bus clock gate (required for MT8192).
-      - description: AHB bus clock gate (required for MT8192).
+    maxItems: 7
 
   clock-names:
     minItems: 2
-    items:
-      - const: source
-      - const: hclk
-      - const: source_cg
-      - const: bus_clk
-      - const: sys_cg
-      - const: pclk_cg
-      - const: axi_cg
-      - const: ahb_cg
+    maxItems: 7
 
   interrupts:
     description:
@@ -190,15 +172,144 @@ required:
   - vmmc-supply
   - vqmmc-supply
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: mediatek,mt8183-mmc
-then:
-  properties:
-    reg:
-      minItems: 2
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt2701-mmc
+            - mediatek,mt6779-mmc
+            - mediatek,mt6795-mmc
+            - mediatek,mt7620-mmc
+            - mediatek,mt7622-mmc
+            - mediatek,mt7623-mmc
+            - mediatek,mt8135-mmc
+            - mediatek,mt8173-mmc
+            - mediatek,mt8183-mmc
+            - mediatek,mt8186-mmc
+            - mediatek,mt8188-mmc
+            - mediatek,mt8195-mmc
+            - mediatek,mt8516-mmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+        clock-names:
+          minItems: 2
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2712-mmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: bus clock used for internal register access (required for MSDC0/3).
+        clock-names:
+          minItems: 3
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: bus_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mmc
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7986-mmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: bus clock used for internal register access (required for MSDC0/3).
+            - description: msdc subsys clock gate
+        clock-names:
+          minItems: 3
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: bus_clk
+            - const: sys_cg
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8186-mmc
+            - mediatek,mt8188-mmc
+            - mediatek,mt8195-mmc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: crypto clock used for data encrypt/decrypt (optional)
+        clock-names:
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: crypto
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8192-mmc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: msdc subsys clock gate
+            - description: peripheral bus clock gate
+            - description: AXI bus clock gate
+            - description: AHB bus clock gate
+        clock-names:
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: sys_cg
+            - const: pclk_cg
+            - const: axi_cg
+            - const: ahb_cg
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
index 0424b06cb655..7bfb10c62566 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
+++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -64,6 +64,7 @@ properties:
           - enum:
               - renesas,sdhi-r8a779a0  # R-Car V3U
               - renesas,sdhi-r8a779f0  # R-Car S4-8
+              - renesas,sdhi-r8a779g0  # R-Car V4H
           - const: renesas,rcar-gen4-sdhi # R-Car Gen4
 
   reg:
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
index 95f59a5e3576..c7e14b7dba9e 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
@@ -71,6 +71,9 @@ properties:
       to control the clock phases, "ciu-sample" is required for tuning
       high speed modes.
 
+  power-domains:
+    maxItems: 1
+
   rockchip,default-sample-phase:
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
index ea9121fb188d..676a74695389 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mmc/sdhci-am654.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI AM654 MMC Controller
 
@@ -11,17 +11,18 @@ maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
 
 allOf:
-  - $ref: mmc-controller.yaml#
+  - $ref: sdhci-common.yaml#
 
 properties:
   compatible:
     oneOf:
-      - const: ti,am654-sdhci-5.1
-      - const: ti,j721e-sdhci-8bit
-      - const: ti,j721e-sdhci-4bit
-      - const: ti,am64-sdhci-8bit
-      - const: ti,am64-sdhci-4bit
-      - const: ti,am62-sdhci
+      - enum:
+          - ti,am62-sdhci
+          - ti,am64-sdhci-4bit
+          - ti,am64-sdhci-8bit
+          - ti,am654-sdhci-5.1
+          - ti,j721e-sdhci-4bit
+          - ti,j721e-sdhci-8bit
       - items:
           - const: ti,j7200-sdhci-8bit
           - const: ti,j721e-sdhci-8bit
@@ -49,8 +50,6 @@ properties:
       - const: clk_ahb
       - const: clk_xin
 
-  sdhci-caps-mask: true
-
   dma-coherent:
     type: boolean
 
@@ -61,67 +60,67 @@ properties:
 
   ti,otap-del-sel-legacy:
     description: Output tap delay for SD/MMC legacy timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-mmc-hs:
     description: Output tap delay for MMC high speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sd-hs:
     description: Output tap delay for SD high speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sdr12:
     description: Output tap delay for SD UHS SDR12 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sdr25:
     description: Output tap delay for SD UHS SDR25 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sdr50:
     description: Output tap delay for SD UHS SDR50 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sdr104:
     description: Output tap delay for SD UHS SDR104 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-ddr50:
     description: Output tap delay for SD UHS DDR50 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-ddr52:
     description: Output tap delay for eMMC DDR52 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-hs200:
     description: Output tap delay for eMMC HS200 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-hs400:
     description: Output tap delay for eMMC HS400 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
@@ -131,49 +130,55 @@ properties:
 
   ti,itap-del-sel-legacy:
     description: Input tap delay for SD/MMC legacy timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-mmc-hs:
     description: Input tap delay for MMC high speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-sd-hs:
     description: Input tap delay for SD high speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-sdr12:
     description: Input tap delay for SD UHS SDR12 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-sdr25:
     description: Input tap delay for SD UHS SDR25 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-ddr50:
+    description: Input tap delay for MMC DDR50 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-ddr52:
     description: Input tap delay for MMC DDR52 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,trm-icp:
     description: DLL trim select
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,driver-strength-ohm:
     description: DLL drive strength in ohms
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum:
       - 33
       - 40
@@ -183,11 +188,11 @@ properties:
 
   ti,strobe-sel:
     description: strobe select delay for HS400 speed mode.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   ti,clkbuf-sel:
     description: Clock Delay Buffer Select
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   ti,fails-without-test-cd:
     $ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-common.yaml b/Documentation/devicetree/bindings/mmc/sdhci-common.yaml
new file mode 100644
index 000000000000..1664615187c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-common.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SDHCI Controller Common Properties
+
+maintainers:
+  - Adrian Hunter <adrian.hunter@intel.com>
+
+description:
+  Common properties present on Secure Digital Host Controller Interface (SDHCI)
+  devices.
+
+properties:
+  sdhci-caps:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      Additionally present SDHCI capabilities - values for SDHCI_CAPABILITIES
+      and SDHCI_CAPABILITIES_1 registers.
+
+  sdhci-caps-mask:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      Masked SDHCI capabilities to remove from SDHCI_CAPABILITIES and
+      SDHCI_CAPABILITIES_1 registers.
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
deleted file mode 100644
index 3ee9263adf73..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Fujitsu SDHCI controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci_f_sdh30 driver.
-
-Required properties:
-- compatible: "fujitsu,mb86s70-sdhci-3.0"
-- clocks: Must contain an entry for each entry in clock-names. It is a
-  list of phandles and clock-specifier pairs.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Should contain the following two entries:
-	"iface" - clock used for sdhci interface
-	"core"  - core clock for sdhci controller
-
-Optional properties:
-- vqmmc-supply: phandle to the regulator device tree node, mentioned
-  as the VCCQ/VDD_IO supply in the eMMC/SD specs.
-- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
-  requires the CMD_DAT_DELAY control to be enabled.
-
-Example:
-
-	sdhci1: mmc@36600000 {
-		compatible = "fujitsu,mb86s70-sdhci-3.0";
-		reg = <0 0x36600000 0x1000>;
-		interrupts = <0 172 0x4>,
-			     <0 173 0x4>;
-		bus-width = <4>;
-		vqmmc-supply = <&vccq_sdhci1>;
-		clocks = <&clock 2 2 0>, <&clock 2 3 0>;
-		clock-names = "iface", "core";
-	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index a96f143479c7..6b89238f0565 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -1,9 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mmc/sdhci-msm.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mmc/sdhci-msm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm SDHCI controller (sdhci-msm)
 
@@ -26,6 +25,7 @@ properties:
               - qcom,msm8226-sdhci
               - qcom,msm8953-sdhci
               - qcom,msm8974-sdhci
+              - qcom,msm8976-sdhci
               - qcom,msm8916-sdhci
               - qcom,msm8992-sdhci
               - qcom,msm8994-sdhci
@@ -45,9 +45,12 @@ properties:
               - qcom,sm6115-sdhci
               - qcom,sm6125-sdhci
               - qcom,sm6350-sdhci
+              - qcom,sm6375-sdhci
               - qcom,sm8150-sdhci
               - qcom,sm8250-sdhci
+              - qcom,sm8350-sdhci
               - qcom,sm8450-sdhci
+              - qcom,sm8550-sdhci
           - const: qcom,sdhci-msm-v5 # for sdcc version 5.0
 
   reg:
@@ -80,6 +83,8 @@ properties:
       - const: cal
       - const: sleep
 
+  dma-coherent: true
+
   interrupts:
     maxItems: 2
 
@@ -133,16 +138,6 @@ properties:
     description: A phandle to sdhci power domain node
     maxItems: 1
 
-  mmc-ddr-1_8v: true
-
-  mmc-hs200-1_8v: true
-
-  mmc-hs400-1_8v: true
-
-  bus-width: true
-
-  max-frequency: true
-
   operating-points-v2: true
 
 patternProperties:
@@ -165,7 +160,7 @@ required:
   - interrupts
 
 allOf:
-  - $ref: mmc-controller.yaml#
+  - $ref: sdhci-common.yaml#
 
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
index 71f8e726d641..51ba44cad842 100644
--- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -45,6 +45,17 @@ properties:
       - const: block
       - const: timer
 
+  resets:
+    maxItems: 5
+
+  reset-names:
+    items:
+      - const: core
+      - const: bus
+      - const: axi
+      - const: block
+      - const: timer
+
   rockchip,txclk-tapnum:
     description: Specify the number of delay for tx sampling.
     $ref: /schemas/types.yaml#/definitions/uint8
diff --git a/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml
new file mode 100644
index 000000000000..23aa8e6b2d70
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Ltd. Co. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sunplus,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus MMC Controller
+
+maintainers:
+  - Tony Huang <tonyhuang.sunplus@gmail.com>
+  - Li-hao Kuo <lhjeff911@gmail.com>
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+
+properties:
+  compatible:
+    enum:
+      - sunplus,sp7021-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mmc0: mmc@9c003b00 {
+        compatible = "sunplus,sp7021-mmc";
+        reg = <0x9c003b00 0x180>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0x4e>;
+        resets = <&rstc 0x3e>;
+        bus-width = <8>;
+        max-frequency = <52000000>;
+        non-removable;
+        disable-wp;
+        cap-mmc-highspeed;
+        mmc-ddr-3_3v;
+        no-sdio;
+        no-sd;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
index ae6d6fca79e2..e1f5f26f3f1c 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
@@ -6,9 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Synopsys Designware Mobile Storage Host Controller Binding
 
-allOf:
-  - $ref: "synopsys-dw-mshc-common.yaml#"
-
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
 
@@ -38,6 +35,35 @@ properties:
       - const: biu
       - const: ciu
 
+  altr,sysmgr-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the sysmgr node
+          - description: register offset that controls the SDMMC clock phase
+          - description: register shift for the smplsel(drive in) setting
+    description:
+      This property is optional. Contains the phandle to System Manager block
+      that contains the SDMMC clock-phase control register. The first value is
+      the pointer to the sysmgr, the 2nd value is the register offset for the
+      SDMMC clock phase register, and the 3rd value is the bit shift for the
+      smplsel(drive in) setting.
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: altr,socfpga-dw-mshc
+    then:
+      properties:
+        altr,sysmgr-syscon: true
+    else:
+      properties:
+        altr,sysmgr-syscon: false
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
index cfd74659fbed..697333a56d5e 100644
--- a/Documentation/devicetree/bindings/power/wakeup-source.txt
+++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -17,15 +17,14 @@ interrupt.
 List of legacy properties and respective binding document
 ---------------------------------------------------------
 
-1. "enable-sdio-wakeup"		Documentation/devicetree/bindings/mmc/mmc.txt
-2. "gpio-key,wakeup"		Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
-3. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
-4. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+1. "gpio-key,wakeup"		Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
+2. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
+3. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
 				Documentation/devicetree/bindings/mfd/tc3589x.txt
 				Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
-5. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
-6. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
-7. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+4. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+5. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
+6. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
 
 Examples
 --------