Merge tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "There is nothing exciting going on, no core changes, just a few
  drivers and cleanups.

  New drivers:

   - Cypress CY8C95x0 chip pin control support, along with an immediate
     cleanup

   - Mediatek MT8188 SoC pin control support

   - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin
     control support

   - Qualcomm PM7250, PM8450

   - Rockchip RV1126 SoC pin control support

  Improvements:

   - Fix some missing pins in the Armada 37xx driver

   - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP()
     macro

   - Fix some GPIO irq_chips to be immutable

   - Massive Qualcomm device tree binding cleanup, with more to come"

* tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits)
  MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement
  pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100"
  pinctrl: Create subdirectory for StarFive drivers
  dt-bindings: pinctrl: st,stm32: Document interrupt-controller property
  dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property
  dt-bindings: pinctrl: st,stm32: Document gpio-line-names
  pinctrl: st: stop abusing of_get_named_gpio()
  pinctrl: wpcm450: Correct the fwnode_irq_get() return value check
  pinctrl: bcm: Remove unused struct bcm6328_pingroup
  pinctrl: qcom: restrict drivers per ARM/ARM64
  pinctrl: bcm: ns: Remove redundant dev_err call
  gpio: rockchip: request GPIO mux to pinctrl when setting direction
  pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback
  pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops
  pinctrl: cy8c95x0: Drop atomicity on operations on push_pull
  pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux()
  pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper
  pinctrl: stm32: Switch to use dev_err_probe() helper
  dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings
  pinctrl: qcom: spmi-gpio: Add compatible for PM7250B
  ...

1 files changed, 28 insertions, 20 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
index 28c656b5f746..89b8f3dd67a1 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -117,6 +117,10 @@ patternProperties:
           "i2s"             "audio"     62, 63, 64, 65
           "switch_int"      "eth"       66
           "mdc_mdio"        "eth"       67
+          "wf_2g"           "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83
+          "wf_5g"           "wifi"      91, 92, 93, 94, 95, 96, 97, 98, 99, 100
+          "wf_dbdc"         "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83,
+                                        84, 85
 
         $ref: "/schemas/pinctrl/pinmux-node.yaml"
         properties:
@@ -234,7 +238,9 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [wf_2g, wf_5g, wf_dbdc]
+                  items:
+                    enum: [wf_2g, wf_5g, wf_dbdc]
+                  maxItems: 3
       '.*conf.*':
         type: object
         additionalProperties: false
@@ -248,25 +254,27 @@ patternProperties:
               An array of strings. Each string contains the name of a pin.
               There is no PIN 41 to PIN 65 above on mt7686b, you can only use
               those pins on mt7986a.
-            enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
-                   GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
-                   GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
-                   GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
-                   SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
-                   SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
-                   UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
-                   UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
-                   UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
-                   EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
-                   EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
-                   PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
-                   WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
-                   WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
-                   WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
-                   WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
-                   WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
-                   WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
-                   WF1_HB8]
+            items:
+              enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
+                     GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
+                     GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
+                     GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
+                     SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
+                     SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
+                     UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
+                     UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
+                     UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
+                     EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
+                     EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
+                     PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
+                     WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
+                     WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
+                     WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
+                     WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
+                     WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
+                     WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
+                     WF1_HB8]
+            maxItems: 101
 
           bias-disable: true