Merge tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of the pin control changes for the v5.9 kernel
  series:

  Core changes:

   - The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range()
     macro" was put in an immutable branch and merged into the pinctrl
     tree as well. We see these changes also here.

   - Improved debug output for pins used as GPIO.

  New drivers:

   - Ocelot Sparx5 SoC driver.

   - Intel Emmitsburg SoC subdriver.

   - Intel Tiger Lake-H SoC subdriver.

   - Qualcomm PM660 SoC subdriver.

   - Renesas SH-PFC R8A774E1 subdriver.

  Driver improvements:

   - Linear improvement and cleanups of the Intel drivers for
     Cherryview, Lynxpoint, Baytrail etc. Improved locking among other
     things.

   - Renesas SH-PFC has added support for RPC pins, groups, and
     functions to r8a77970 and r8a77980.

   - The newere Freescale (now NXP) i.MX8 pin controllers have been
     modularized. This is driven by the Google Android GKI initiative I
     think.

   - Open drain support for pins on the Qualcomm IPQ4019.

   - The Ingenic driver can handle both edges IRQ detection.

   - A big slew of documentation fixes all over the place.

   - A few irqchip template conversions by yours truly.

* tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
  dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC
  pinctrl: stmfx: Use irqchip template
  pinctrl: amd: Use irqchip template
  pinctrl: mediatek: fix build for tristate changes
  pinctrl: samsung: Use bank name as irqchip name
  pinctrl: core: print gpio in pins debugfs file
  pinctrl: mediatek: add mt6779 eint support
  pinctrl: mediatek: add pinctrl support for MT6779 SoC
  pinctrl: mediatek: avoid virtual gpio trying to set reg
  pinctrl: mediatek: update pinmux definitions for mt6779
  pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API
  pinctrl: mcp23s08: Use irqchip template
  pinctrl: sx150x: Use irqchip template
  dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes
  pinctrl: intel: Add Intel Emmitsburg pin controller support
  pinctl: ti: iodelay: Replace HTTP links with HTTPS ones
  Revert "gpio: omap: handle pin config bias flags"
  pinctrl: single: Use fallthrough pseudo-keyword
  pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword
  pinctrl: baytrail: Use fallthrough pseudo-keyword
  ...

1 files changed, 176 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
new file mode 100644
index 000000000000..18163fb69ce7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ingenic,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs pin controller devicetree bindings
+
+description: >
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of the
+  phrase "pin configuration node".
+
+  For the Ingenic SoCs, pin control is tightly bound with GPIO ports. All pins
+  may be used as GPIOs, multiplexed device functions are configured within the
+  GPIO port configuration registers and it is typical to refer to pins using the
+  naming scheme "PxN" where x is a character identifying the GPIO port with
+  which the pin is associated and N is an integer from 0 to 31 identifying the
+  pin within that GPIO port. For example PA0 is the first pin in GPIO port A,
+  and PB31 is the last pin in GPIO port B. The JZ4740, the X1000 and the X1830
+  contains 4 GPIO ports, PA to PD, for a total of 128 pins. The JZ4760, the
+  JZ4770 and the JZ4780 contains 6 GPIO ports, PA to PF, for a total of 192
+  pins.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  nodename:
+    pattern: "^pinctrl@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+        - ingenic,jz4740-pinctrl
+        - ingenic,jz4725b-pinctrl
+        - ingenic,jz4760-pinctrl
+        - ingenic,jz4770-pinctrl
+        - ingenic,jz4780-pinctrl
+        - ingenic,x1000-pinctrl
+        - ingenic,x1500-pinctrl
+        - ingenic,x1830-pinctrl
+      - items:
+        - const: ingenic,jz4760b-pinctrl
+        - const: ingenic,jz4760-pinctrl
+      - items:
+        - const: ingenic,x1000e-pinctrl
+        - const: ingenic,x1000-pinctrl
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^gpio@[0-9]$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - ingenic,jz4740-gpio
+          - ingenic,jz4725b-gpio
+          - ingenic,jz4760-gpio
+          - ingenic,jz4770-gpio
+          - ingenic,jz4780-gpio
+          - ingenic,x1000-gpio
+          - ingenic,x1500-gpio
+          - ingenic,x1830-gpio
+
+      reg:
+        items:
+          - description: The GPIO bank number
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      gpio-ranges:
+        maxItems: 1
+
+      interrupt-controller: true
+
+      "#interrupt-cells":
+        const: 2
+        description:
+          Refer to ../interrupt-controller/interrupts.txt for more details.
+
+      interrupts:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - "#gpio-cells"
+      - interrupts
+      - interrupt-controller
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      properties:
+        phandle: true
+        function: true
+        groups: true
+        pins: true
+        bias-disable: true
+        bias-pull-up: true
+        bias-pull-down: true
+        output-low: true
+        output-high: true
+      additionalProperties: false
+
+    - type: object
+      properties:
+        phandle: true
+      additionalProperties:
+        type: object
+        allOf:
+          - $ref: pincfg-node.yaml#
+          - $ref: pinmux-node.yaml#
+
+        properties:
+          phandle: true
+          function: true
+          groups: true
+          pins: true
+          bias-disable: true
+          bias-pull-up: true
+          bias-pull-down: true
+          output-low: true
+          output-high: true
+        additionalProperties: false
+
+examples:
+  - |
+    pin-controller@10010000 {
+      compatible = "ingenic,jz4770-pinctrl";
+      reg = <0x10010000 0x600>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      gpio@0 {
+        compatible = "ingenic,jz4770-gpio";
+        reg = <0>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 32>;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&intc>;
+        interrupts = <17>;
+      };
+    };