Merge branch 'remotes/lorenzo/pci/dwc'

- Support multiple ATU memory regions (Rob Herring)

- Warn if non-prefetchable memory aperture is > 32-bit (Vidya Sagar)

- Allow programming ATU for >4GB memory (Vidya Sagar)

- Move ATU offset out of driver match data (Rob Herring)

- Move "dbi", "dbi2", and "addr_space" resource setup to common code (Rob
  Herring)

- Remove unneeded function wrappers (Rob Herring)

- Ensure all outbound ATU windows are reset to reduce dependencies on
  bootloader (Rob Herring)

- Use the default MSI irq_chip for dra7xx (Rob Herring)

- Drop the .set_num_vectors() host op (Rob Herring)

- Move MSI interrupt setup into DWC common code (Rob Herring)

- Rework and simplify DWC MSI initialization (Rob Herring)

- Move link handling to DWC common code (Rob Herring)

- Move dw_pcie_msi_init() calls to DWC common code (Rob Herring)

- Move dw_pcie_setup_rc() calls to DWC common code (Rob Herring)

- Remove unnecessary wrappers around dw_pcie_host_init() (Rob Herring)

- Revert "keystone: Drop duplicated 'num-viewport'" to prepare for
  detecting number of iATU regions without help from DT (Rob Herring)

- Move inbound and outbound windows to common struct (Rob Herring)

- Detect number of DWC iATU windows from device registers (Rob Herring)

- Drop samsung,exynos5440-pcie binding (Marek Szyprowski)

- Add samsung,exynos-pcie and samsung,exynos-pcie-phy bindings for
  Exynos5433 variant (Marek Szyprowski)

- Rework phy-exynos-pcie driver to support Exynos5433 PCIe PHY (Jaehoon
  Chung)

- Rework pci-exynos.c to support Exynos5433 PCIe host (Jaehoon Chung)

- Move tegra "dbi" accesses to post common DWC initialization (Vidya Sagar)

- Read tegra dbi" base address in application logic (Vidya Sagar)

- Fix tegra ASPM-L1SS advertisement disable code (Vidya Sagar)

- Set Tegra194 DesignWare IP version to 0x490A (Vidya Sagar)

- Continue tegra unconfig sequence even if parts fail (Vidya Sagar)

- Check return value of tegra_pcie_init_controller() (Vidya Sagar)

- Disable tegra LTSSM during L2 entry (Vidya Sagar)

- Add SM8250 SoC PCIe DT bindings and support (Manivannan Sadhasivam)

- Add SM8250 BDF to SID mapping (Manivannan Sadhasivam)

- Set 32-bit DMA mask for DWC MSI target address allocation (Vidya Sagar)

* remotes/lorenzo/pci/dwc:
  PCI: dwc: Set 32-bit DMA mask for MSI target address allocation
  PCI: qcom: Add support for configuring BDF to SID mapping for SM8250
  PCI: qcom: Add SM8250 SoC support
  dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC
  PCI: tegra: Disable LTSSM during L2 entry
  PCI: tegra: Check return value of tegra_pcie_init_controller()
  PCI: tegra: Continue unconfig sequence even if parts fail
  PCI: tegra: Set DesignWare IP version
  PCI: tegra: Fix ASPM-L1SS advertisement disable code
  PCI: tegra: Read "dbi" base address to program in application logic
  PCI: tegra: Move "dbi" accesses to post common DWC initialization
  PCI: dwc: exynos: Rework the driver to support Exynos5433 variant
  phy: samsung: phy-exynos-pcie: rework driver to support Exynos5433 PCIe PHY
  dt-bindings: phy: exynos: add the samsung,exynos-pcie-phy binding
  dt-bindings: PCI: exynos: add the samsung,exynos-pcie binding
  dt-bindings: PCI: exynos: drop samsung,exynos5440-pcie binding
  PCI: dwc: Detect number of iATU windows
  PCI: dwc: Move inbound and outbound windows to common struct
  Revert "PCI: dwc/keystone: Drop duplicated 'num-viewport'"
  PCI: dwc: Remove unnecessary wrappers around dw_pcie_host_init()
  PCI: dwc: Move dw_pcie_setup_rc() to DWC common code
  PCI: dwc: Move dw_pcie_msi_init() into core
  PCI: dwc: Move link handling into common code
  PCI: dwc: Rework MSI initialization
  PCI: dwc: Move MSI interrupt setup into DWC common code
  PCI: dwc: Drop the .set_num_vectors() host op
  PCI: dwc/dra7xx: Use the common MSI irq_chip
  PCI: dwc: Ensure all outbound ATU windows are reset
  PCI: dwc/intel-gw: Remove some unneeded function wrappers
  PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code
  PCI: dwc/intel-gw: Move ATU offset out of driver match data
  PCI: dwc: Add support to program ATU for >4GB memory
  PCI: of: Warn if non-prefetchable memory aperture size is > 32-bit
  PCI: dwc: Support multiple ATU memory regions

1 files changed, 51 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml
new file mode 100644
index 000000000000..ac0af40be52d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,exynos-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series PCIe PHY Device Tree Bindings
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Jaehoon Chung <jh80.chung@samsung.com>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    const: samsung,exynos5433-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  samsung,pmu-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle for PMU system controller interface, used to
+                 control PMU registers bits for PCIe PHY
+
+  samsung,fsys-sysreg:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle for FSYS sysreg interface, used to control
+                 sysreg registers bits for PCIe PHY
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - samsung,pmu-syscon
+  - samsung,fsys-sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie_phy: pcie-phy@15680000 {
+        compatible = "samsung,exynos5433-pcie-phy";
+        reg = <0x15680000 0x1000>;
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        samsung,fsys-sysreg = <&syscon_fsys>;
+        #phy-cells = <0>;
+    };
+...