Merge tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "MTD core changes:

   - Dynamic partition support

   - Fix deadlock in sm_ftl

   - Various refcount fixes in maps, partitions and parser code

   - Integer overflow fixes in mtdchar

   - Support for Sercomm partitions

  NAND driver changes:

   - Clockrate fix for arasan

   - Add ATO25D1GA support

   - Double free fix for meson driver

   - Fix probe/remove methods in cafe NAND

   - Support unprotected spare data pages in qcom_nandc

  SPI NOR core changes:

   - move SECT_4K_PMC flag out of the core as it's a vendor specific
     flag

   - s/addr_width/addr_nbytes/g: address width means the number of IO
     lines used for the address, whereas in the code it is used as the
     number of address bytes.

   - do not change nor->addr_nbytes at SFDP parsing time. At the SFDP
     parsing time we should not change members of struct spi_nor, but
     instead fill members of struct spi_nor_flash_parameters which could
     later on be used by the callers.

   - track flash's internal address mode so that we can use 4B opcodes
     together with opcodes that don't have a 4B opcode correspondent.

  SPI NOR manufacturer drivers changes:

   - esmt: Rename "f25l32qa" flash name to "f25l32qa-2s".

   - micron-st: Skip FSR reading if SPI controller does not support it
     to allow flashes that support FSR to work even when attached to
     such SPI controllers.

   - spansion: Add s25hl-t/s25hs-t IDs and fixups"

* tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (53 commits)
  mtd: core: check partition before dereference
  mtd: spi-nor: fix spi_nor_spimem_setup_op() call in spi_nor_erase_{sector,chip}()
  mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups
  mtd: spi-nor: spansion: Add local function to discover page size
  mtd: spi-nor: core: Track flash's internal address mode
  mtd: spi-nor: core: Return error code from set_4byte_addr_mode()
  mtd: spi-nor: Do not change nor->addr_nbytes at SFDP parsing time
  mtd: spi-nor: core: Shrink the storage size of the flash_info's addr_nbytes
  mtd: spi-nor: s/addr_width/addr_nbytes
  mtd: spi-nor: esmt: Use correct name of f25l32qa
  mtd: spi-nor: micron-st: Skip FSR reading if SPI controller does not support it
  MAINTAINERS: Use my kernel.org email
  mtd: rawnand: arasan: Fix clock rate in NV-DDR
  mtd: rawnand: arasan: Update NAND bus clock instead of system clock
  mtd: core: introduce of support for dynamic partitions
  dt-bindings: mtd: partitions: add additional example for qcom,smem-part
  dt-bindings: mtd: partitions: support label/name only partition
  mtd: spi-nor: move SECT_4K_PMC special handling
  mtd: dataflash: Add SPI ID table
  mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path
  ...

1 files changed, 27 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
index 84ad7ff30121..482a2c068740 100644
--- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -102,6 +102,31 @@ allOf:
             - const: rx
             - const: cmd
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq806x-nand
+
+    then:
+      properties:
+        qcom,boot-partitions:
+          $ref: /schemas/types.yaml#/definitions/uint32-matrix
+          items:
+            items:
+              - description: offset
+              - description: size
+          description:
+            Boot partition use a different layout where the 4 bytes of spare
+            data are not protected by ECC. Use this to declare these special
+            partitions by defining first the offset and then the size.
+
+            It's in the form of <offset1 size1 offset2 size2 offset3 ...>
+            and should be declared in ascending order.
+
+            Refer to the ipq8064 example on how to use this special binding.
+
 required:
   - compatible
   - reg
@@ -135,6 +160,8 @@ examples:
         nand-ecc-strength = <4>;
         nand-bus-width = <8>;
 
+        qcom,boot-partitions = <0x0 0x58a0000>;
+
         partitions {
           compatible = "fixed-partitions";
           #address-cells = <1>;