summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/misc
diff options
context:
space:
mode:
authorRob Herring <robh@kernel.org>2015-09-03 17:50:01 -0500
committerRob Herring <robh@kernel.org>2015-10-22 09:21:23 -0500
commitd9d41df3e8ef39b7b2cfeb4e9a2ba5c7cf7cad88 (patch)
treead8a2b88e0e4dbc3864a7ec24d04d93bd60ba327 /Documentation/devicetree/bindings/misc
parent4f2f76f1255444c034c7f95fbaa62b19387936a3 (diff)
downloadlinux-d9d41df3e8ef39b7b2cfeb4e9a2ba5c7cf7cad88.tar.bz2
dt-bindings: consolidate various misc bindings
Move various bindings in misc to appropriate subsystem directories. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org>
Diffstat (limited to 'Documentation/devicetree/bindings/misc')
-rw-r--r--Documentation/devicetree/bindings/misc/bmp085.txt24
-rw-r--r--Documentation/devicetree/bindings/misc/lis302.txt119
-rw-r--r--Documentation/devicetree/bindings/misc/ti,dac7512.txt20
3 files changed, 0 insertions, 163 deletions
diff --git a/Documentation/devicetree/bindings/misc/bmp085.txt b/Documentation/devicetree/bindings/misc/bmp085.txt
deleted file mode 100644
index d7a6deb6b21e..000000000000
--- a/Documentation/devicetree/bindings/misc/bmp085.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-BMP085/BMP18x digital pressure sensors
-
-Required properties:
-- compatible: bosch,bmp085
-
-Optional properties:
-- chip-id: configurable chip id for non-default chip revisions
-- temp-measurement-period: temperature measurement period (milliseconds)
-- default-oversampling: default oversampling value to be used at startup,
- value range is 0-3 with rising sensitivity.
-- interrupt-parent: should be the phandle for the interrupt controller
-- interrupts: interrupt mapping for IRQ
-
-Example:
-
-pressure@77 {
- compatible = "bosch,bmp085";
- reg = <0x77>;
- chip-id = <10>;
- temp-measurement-period = <100>;
- default-oversampling = <2>;
- interrupt-parent = <&gpio0>;
- interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-};
diff --git a/Documentation/devicetree/bindings/misc/lis302.txt b/Documentation/devicetree/bindings/misc/lis302.txt
deleted file mode 100644
index 2a19bff9693f..000000000000
--- a/Documentation/devicetree/bindings/misc/lis302.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-LIS302 accelerometer devicetree bindings
-
-This device is matched via its bus drivers, and has a number of properties
-that apply in on the generic device (independent from the bus).
-
-
-Required properties for the SPI bindings:
- - compatible: should be set to "st,lis3lv02d_spi"
- - reg: the chipselect index
- - spi-max-frequency: maximal bus speed, should be set to 1000000 unless
- constrained by external circuitry
- - interrupts: the interrupt generated by the device
-
-Required properties for the I2C bindings:
- - compatible: should be set to "st,lis3lv02d"
- - reg: i2c slave address
- - Vdd-supply: The input supply for Vdd
- - Vdd_IO-supply: The input supply for Vdd_IO
-
-
-Optional properties for all bus drivers:
-
- - st,click-single-{x,y,z}: if present, tells the device to issue an
- interrupt on single click events on the
- x/y/z axis.
- - st,click-double-{x,y,z}: if present, tells the device to issue an
- interrupt on double click events on the
- x/y/z axis.
- - st,click-thresh-{x,y,z}: set the x/y/z axis threshold
- - st,click-click-time-limit: click time limit, from 0 to 127.5msec
- with step of 0.5 msec
- - st,click-latency: click latency, from 0 to 255 msec with
- step of 1 msec.
- - st,click-window: click window, from 0 to 255 msec with
- step of 1 msec.
- - st,irq{1,2}-disable: disable IRQ 1/2
- - st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition
- - st,irq{1,2}-ff-wu-2: raise IRQ 1/2 on FF_WU_2 condition
- - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready contition
- - st,irq{1,2}-click: raise IRQ 1/2 on click condition
- - st,irq-open-drain: consider IRQ lines open-drain
- - st,irq-active-low: make IRQ lines active low
- - st,wu-duration-1: duration register for Free-Fall/Wake-Up
- interrupt 1
- - st,wu-duration-2: duration register for Free-Fall/Wake-Up
- interrupt 2
- - st,wakeup-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for
- upper/lower limit
- - st,wakeup-threshold: set wakeup threshold
- - st,wakeup2-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for
- upper/lower limit for second wakeup
- engine.
- - st,wakeup2-threshold: set wakeup threshold for second wakeup
- engine.
- - st,highpass-cutoff-hz=: 1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of
- highpass cut-off frequency
- - st,hipass{1,2}-disable: disable highpass 1/2.
- - st,default-rate=: set the default rate
- - st,axis-{x,y,z}=: set the axis to map to the three coordinates.
- Negative values can be used for inverted axis.
- - st,{min,max}-limit-{x,y,z} set the min/max limits for x/y/z axis
- (used by self-test)
-
-
-Example for a SPI device node:
-
- lis302@0 {
- compatible = "st,lis302dl-spi";
- reg = <0>;
- spi-max-frequency = <1000000>;
- interrupt-parent = <&gpio>;
- interrupts = <104 0>;
-
- st,click-single-x;
- st,click-single-y;
- st,click-single-z;
- st,click-thresh-x = <10>;
- st,click-thresh-y = <10>;
- st,click-thresh-z = <10>;
- st,irq1-click;
- st,irq2-click;
- st,wakeup-x-lo;
- st,wakeup-x-hi;
- st,wakeup-y-lo;
- st,wakeup-y-hi;
- st,wakeup-z-lo;
- st,wakeup-z-hi;
- };
-
-Example for a I2C device node:
-
- lis331dlh: lis331dlh@18 {
- compatible = "st,lis331dlh", "st,lis3lv02d";
- reg = <0x18>;
- Vdd-supply = <&lis3_reg>;
- Vdd_IO-supply = <&lis3_reg>;
-
- st,click-single-x;
- st,click-single-y;
- st,click-single-z;
- st,click-thresh-x = <10>;
- st,click-thresh-y = <10>;
- st,click-thresh-z = <10>;
- st,irq1-click;
- st,irq2-click;
- st,wakeup-x-lo;
- st,wakeup-x-hi;
- st,wakeup-y-lo;
- st,wakeup-y-hi;
- st,wakeup-z-lo;
- st,wakeup-z-hi;
- st,min-limit-x = <120>;
- st,min-limit-y = <120>;
- st,min-limit-z = <140>;
- st,max-limit-x = <550>;
- st,max-limit-y = <550>;
- st,max-limit-z = <750>;
- };
-
diff --git a/Documentation/devicetree/bindings/misc/ti,dac7512.txt b/Documentation/devicetree/bindings/misc/ti,dac7512.txt
deleted file mode 100644
index 1db45939dac9..000000000000
--- a/Documentation/devicetree/bindings/misc/ti,dac7512.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-TI DAC7512 DEVICETREE BINDINGS
-
-Required properties:
-
- - "compatible" Must be set to "ti,dac7512"
-
-Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
-apply. In particular, "reg" and "spi-max-frequency" properties must be given.
-
-
-Example:
-
- spi_master {
- dac7512: dac7512@0 {
- compatible = "ti,dac7512";
- reg = <0>; /* CS0 */
- spi-max-frequency = <1000000>;
- };
- };
-