diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-02-22 10:31:29 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-02-22 10:31:29 -0800 |
commit | d652ea30ba32db12fe8365182fad5ba2e7c22822 (patch) | |
tree | bf2352dd0e4f9c232ead71b0087a2324029074cd /Documentation/devicetree/bindings/iommu | |
parent | 3672ac8ac0d8bece188f82c48770bbe40f234f1e (diff) | |
parent | 45e606f2726926b04094e1c9bf809bca4884c57f (diff) | |
download | linux-d652ea30ba32db12fe8365182fad5ba2e7c22822.tar.bz2 |
Merge tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM SMMU and Mediatek updates from Will Deacon:
- Support for MT8192 IOMMU from Mediatek
- Arm v7s io-pgtable extensions for MT8192
- Removal of TLBI_ON_MAP quirk
- New Qualcomm compatible strings
- Allow SVA without hardware broadcast TLB maintenance on SMMUv3
- Virtualization Host Extension support for SMMUv3 (SVA)
- Allow SMMUv3 PMU perf driver to be built independently from IOMMU
- Some tidy-up in IOVA and core code
- Conversion of the AMD IOMMU code to use the generic IO-page-table
framework
- Intel VT-d updates from Lu Baolu:
- Audit capability consistency among different IOMMUs
- Add SATC reporting structure support
- Add iotlb_sync_map callback support
- SDHI support for Renesas IOMMU driver
- Misc cleanups and other small improvments
* tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (94 commits)
iommu/amd: Fix performance counter initialization
MAINTAINERS: repair file pattern in MEDIATEK IOMMU DRIVER
iommu/mediatek: Fix error code in probe()
iommu/mediatek: Fix unsigned domid comparison with less than zero
iommu/vt-d: Parse SATC reporting structure
iommu/vt-d: Add new enum value and structure for SATC
iommu/vt-d: Add iotlb_sync_map callback
iommu/vt-d: Move capability check code to cap_audit files
iommu/vt-d: Audit IOMMU Capabilities and add helper functions
iommu/vt-d: Fix 'physical' typos
iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping
iommu/vt-d: Fix compile error [-Werror=implicit-function-declaration]
driver/perf: Remove ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3
MAINTAINERS: Add entry for MediaTek IOMMU
iommu/mediatek: Add mt8192 support
iommu/mediatek: Remove unnecessary check in attach_device
iommu/mediatek: Support master use iova over 32bit
iommu/mediatek: Add iova reserved function
iommu/mediatek: Support for multi domains
iommu/mediatek: Add get_domain_id from dev->dma_range_map
...
Diffstat (limited to 'Documentation/devicetree/bindings/iommu')
3 files changed, 185 insertions, 105 deletions
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index 3b63f2ae24db..6ba161dea4d8 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -34,9 +34,11 @@ properties: items: - enum: - qcom,sc7180-smmu-500 + - qcom,sc8180x-smmu-500 - qcom,sdm845-smmu-500 - qcom,sm8150-smmu-500 - qcom,sm8250-smmu-500 + - qcom,sm8350-smmu-500 - const: arm,mmu-500 - description: Qcom Adreno GPUs implementing "arm,smmu-v2" items: diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt deleted file mode 100644 index ac949f7fe3d4..000000000000 --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt +++ /dev/null @@ -1,105 +0,0 @@ -* Mediatek IOMMU Architecture Implementation - - Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U), and -this M4U have two generations of HW architecture. Generation one uses flat -pagetable, and only supports 4K size page mapping. Generation two uses the -ARM Short-Descriptor translation table format for address translation. - - About the M4U Hardware Block Diagram, please check below: - - EMI (External Memory Interface) - | - m4u (Multimedia Memory Management Unit) - | - +--------+ - | | - gals0-rx gals1-rx (Global Async Local Sync rx) - | | - | | - gals0-tx gals1-tx (Global Async Local Sync tx) - | | Some SoCs may have GALS. - +--------+ - | - SMI Common(Smart Multimedia Interface Common) - | - +----------------+------- - | | - | gals-rx There may be GALS in some larbs. - | | - | | - | gals-tx - | | - SMI larb0 SMI larb1 ... SoCs have several SMI local arbiter(larb). - (display) (vdec) - | | - | | - +-----+-----+ +----+----+ - | | | | | | - | | |... | | | ... There are different ports in each larb. - | | | | | | -OVL0 RDMA0 WDMA0 MC PP VLD - - As above, The Multimedia HW will go through SMI and M4U while it -access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain -smi local arbiter and smi common. It will control whether the Multimedia -HW should go though the m4u for translation or bypass it and talk -directly with EMI. And also SMI help control the power domain and clocks for -each local arbiter. - Normally we specify a local arbiter(larb) for each multimedia HW -like display, video decode, and camera. And there are different ports -in each larb. Take a example, There are many ports like MC, PP, VLD in the -video decode local arbiter, all these ports are according to the video HW. - In some SoCs, there may be a GALS(Global Async Local Sync) module between -smi-common and m4u, and additional GALS module between smi-larb and -smi-common. GALS can been seen as a "asynchronous fifo" which could help -synchronize for the modules in different clock frequency. - -Required properties: -- compatible : must be one of the following string: - "mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW. - "mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW. - "mediatek,mt6779-m4u" for mt6779 which uses generation two m4u HW. - "mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses - generation one m4u HW. - "mediatek,mt8167-m4u" for mt8167 which uses generation two m4u HW. - "mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW. - "mediatek,mt8183-m4u" for mt8183 which uses generation two m4u HW. -- reg : m4u register base and size. -- interrupts : the interrupt of m4u. -- clocks : must contain one entry for each clock-names. -- clock-names : Only 1 optional clock: - - "bclk": the block clock of m4u. - Here is the list which require this "bclk": - - mt2701, mt2712, mt7623 and mt8173. - Note that m4u use the EMI clock which always has been enabled before kernel - if there is no this "bclk". -- mediatek,larbs : List of phandle to the local arbiters in the current Socs. - Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort - according to the local arbiter index, like larb0, larb1, larb2... -- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW. - Specifies the mtk_m4u_id as defined in - dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623 - dt-binding/memory/mt2712-larb-port.h for mt2712, - dt-binding/memory/mt6779-larb-port.h for mt6779, - dt-binding/memory/mt8167-larb-port.h for mt8167, - dt-binding/memory/mt8173-larb-port.h for mt8173, and - dt-binding/memory/mt8183-larb-port.h for mt8183. - -Example: - iommu: iommu@10205000 { - compatible = "mediatek,mt8173-m4u"; - reg = <0 0x10205000 0 0x1000>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_M4U>; - clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2 &larb3 &larb4 &larb5>; - #iommu-cells = <1>; - }; - -Example for a client device: - display { - compatible = "mediatek,mt8173-disp"; - iommus = <&iommu M4U_PORT_DISP_OVL0>, - <&iommu M4U_PORT_DISP_RDMA0>; - ... - }; diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml new file mode 100644 index 000000000000..0f26fe14c8e2 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/mediatek,iommu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek IOMMU Architecture Implementation + +maintainers: + - Yong Wu <yong.wu@mediatek.com> + +description: |+ + Some MediaTek SOCs contain a Multimedia Memory Management Unit (M4U), and + this M4U have two generations of HW architecture. Generation one uses flat + pagetable, and only supports 4K size page mapping. Generation two uses the + ARM Short-Descriptor translation table format for address translation. + + About the M4U Hardware Block Diagram, please check below: + + EMI (External Memory Interface) + | + m4u (Multimedia Memory Management Unit) + | + +--------+ + | | + gals0-rx gals1-rx (Global Async Local Sync rx) + | | + | | + gals0-tx gals1-tx (Global Async Local Sync tx) + | | Some SoCs may have GALS. + +--------+ + | + SMI Common(Smart Multimedia Interface Common) + | + +----------------+------- + | | + | gals-rx There may be GALS in some larbs. + | | + | | + | gals-tx + | | + SMI larb0 SMI larb1 ... SoCs have several SMI local arbiter(larb). + (display) (vdec) + | | + | | + +-----+-----+ +----+----+ + | | | | | | + | | |... | | | ... There are different ports in each larb. + | | | | | | + OVL0 RDMA0 WDMA0 MC PP VLD + + As above, The Multimedia HW will go through SMI and M4U while it + access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain + smi local arbiter and smi common. It will control whether the Multimedia + HW should go though the m4u for translation or bypass it and talk + directly with EMI. And also SMI help control the power domain and clocks for + each local arbiter. + + Normally we specify a local arbiter(larb) for each multimedia HW + like display, video decode, and camera. And there are different ports + in each larb. Take a example, There are many ports like MC, PP, VLD in the + video decode local arbiter, all these ports are according to the video HW. + + In some SoCs, there may be a GALS(Global Async Local Sync) module between + smi-common and m4u, and additional GALS module between smi-larb and + smi-common. GALS can been seen as a "asynchronous fifo" which could help + synchronize for the modules in different clock frequency. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2701-m4u # generation one + - mediatek,mt2712-m4u # generation two + - mediatek,mt6779-m4u # generation two + - mediatek,mt8167-m4u # generation two + - mediatek,mt8173-m4u # generation two + - mediatek,mt8183-m4u # generation two + - mediatek,mt8192-m4u # generation two + + - description: mt7623 generation one + items: + - const: mediatek,mt7623-m4u + - const: mediatek,mt2701-m4u + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: bclk is the block clock. + + clock-names: + items: + - const: bclk + + mediatek,larbs: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 32 + description: | + List of phandle to the local arbiters in the current Socs. + Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort + according to the local arbiter index, like larb0, larb1, larb2... + + '#iommu-cells': + const: 1 + description: | + This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as + defined in + dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623, + dt-binding/memory/mt2712-larb-port.h for mt2712, + dt-binding/memory/mt6779-larb-port.h for mt6779, + dt-binding/memory/mt8167-larb-port.h for mt8167, + dt-binding/memory/mt8173-larb-port.h for mt8173, + dt-binding/memory/mt8183-larb-port.h for mt8183, + dt-binding/memory/mt8192-larb-port.h for mt8192. + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - mediatek,larbs + - '#iommu-cells' + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-m4u + - mediatek,mt2712-m4u + - mediatek,mt8173-m4u + - mediatek,mt8192-m4u + + then: + required: + - clocks + + - if: + properties: + compatible: + enum: + - mediatek,mt8192-m4u + + then: + required: + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + iommu: iommu@10205000 { + compatible = "mediatek,mt8173-m4u"; + reg = <0x10205000 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2 + &larb3 &larb4 &larb5>; + #iommu-cells = <1>; + }; + + - | + #include <dt-bindings/memory/mt8173-larb-port.h> + + /* Example for a client device */ + display { + compatible = "mediatek,mt8173-disp"; + iommus = <&iommu M4U_PORT_DISP_OVL0>, + <&iommu M4U_PORT_DISP_RDMA0>; + }; |