Input: goodix - add device tree support

This change adds device tree support and binding information for Goodix
GT9xx series touchscreen controller.  It also adds support for 5-finger
chips, like GT911 and GT912, which can be found on ARM tablets, such as
Wexler TAB7200 and MSI Primo73.

Datasheets can be found here:
https://drive.google.com/folderview?id=0BxCVOQS3ZymGfmJyY2RKbE5XbVlKNlktVTlwV0lxNEdxd2dzeWZER094cmJPVnMxN1F0Yzg&usp=sharing

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

1 files changed, 29 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
new file mode 100644
index 000000000000..8ba98eec765b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@@ -0,0 +1,29 @@
+Device tree bindings for Goodix GT9xx series touchscreen controller
+
+Required properties:
+
+ - compatible		: Should be "goodix,gt911"
+				 or "goodix,gt9110"
+				 or "goodix,gt912"
+				 or "goodix,gt927"
+				 or "goodix,gt9271"
+				 or "goodix,gt928"
+				 or "goodix,gt967"
+ - reg			: I2C address of the chip. Should be 0x5d or 0x14
+ - interrupt-parent	: Interrupt controller to which the chip is connected
+ - interrupts		: Interrupt to which the chip is connected
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		gt928@5d {
+			compatible = "goodix,gt928";
+			reg = <0x5d>;
+			interrupt-parent = <&gpio>;
+			interrupts = <0 0>;
+		};
+
+		/* ... */
+	};