Merge tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Removed Drivers:
   - Remove support for TI TPS80031/TPS80032 PMICs

  New Device Support:
   - Add support for Magnetic Reader to TI AM335x
   - Add support for DA9063_EA to Dialog DA9063
   - Add support for SC2730 PMIC to Spreadtrum SC27xx
   - Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI
   - Add support for lots of new PMICS in QCom SPMI PMIC
   - Add support for ADC to Diolan DLN2

  New Functionality:
   - Add support for Power Off to Rockchip RK817

  Fix-ups:
   - Simplify Regmap passing to child devices in hi6421-spmi-pmic
   - SPDX licensing updates in ti_am335x_tscadc
   - Improve error handling in ti_am335x_tscadc
   - Expedite clock search in ti_am335x_tscadc
   - Generic simplifications in ti_am335x_tscadc
   - Use generic macros/defines in ti_am335x_tscadc
   - Remove unused code in ti_am335x_tscadc, cros_ec_dev
   - Convert to GPIOD in wcd934x
   - Add namespacing in ti_am335x_tscadc
   - Restrict compilation to relevant arches in intel_pmt
   - Provide better description/documentation in exynos_lpass
   - Add SPI device ID table in altera-a10sr, motorola-cpcap,
     sprd-sc27xx-spi
   - Change IRQ handling in qcom-pm8xxx
   - Split out I2C and SPI code in arizona
   - Explicitly include used headers in altera-a10sr
   - Convert sysfs show() function to in sysfs_emit
   - Standardise *_exit() and *_remove() return values in mc13xxx,
     stmpe, tps65912
   - Trivial (style/spelling/whitespace) fixups in ti_am335x_tscadc,
     qcom-spmi-pmic, max77686-private
   - Device Tree fix-ups in ti,am3359-tscadc, samsung,s2mps11,
     samsung,s2mpa01, samsung,s5m8767, brcm,misc, brcm,cru, syscon,
     qcom,tcsr, xylon,logicvc, max77686, x-powers,ac100,
     x-powers,axp152, x-powers,axp209-gpio, syscon, qcom,spmi-pmic

  Bug Fixes:
   - Balance refcounting (get/put) in ti_am335x_tscadc, mfd-core
   - Fix IRQ trigger type in sec-irq, max77693, max14577
   - Repair off-by-one in altera-sysmgr
   - Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C"

* tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (95 commits)
  mfd: simple-mfd-i2c: Select MFD_CORE to fix build error
  mfd: tps80031: Remove driver
  mfd: max77686: Correct tab-based alignment of register addresses
  mfd: wcd934x: Replace legacy gpio interface for gpiod
  dt-bindings: mfd: qcom: pm8xxx: Add pm8018 compatible
  mfd: dln2: Add cell for initializing DLN2 ADC
  mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo
  mfd: qcom-spmi-pmic: Document ten more PMICs in the binding
  mfd: qcom-spmi-pmic: Sort compatibles in the driver
  mfd: qcom-spmi-pmic: Sort the compatibles in the binding
  mfd: janz-cmoio: Replace snprintf in show functions with sysfs_emit
  mfd: altera-a10sr: Include linux/module.h
  mfd: tps65912: Make tps65912_device_exit() return void
  mfd: stmpe: Make stmpe_remove() return void
  mfd: mc13xxx: Make mc13xxx_common_exit() return void
  dt-bindings: mfd: syscon: Add samsung,exynosautov9-sysreg compatible
  mfd: altera-sysmgr: Fix a mistake caused by resource_size conversion
  dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema
  dt-bindings: mfd: syscon: Add rk3368 QoS register compatible
  mfd: arizona: Split of_match table into I2C and SPI versions
  ...

2 files changed, 76 insertions, 91 deletions

diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
new file mode 100644
index 000000000000..e44cc65abc8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,am3359-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 Touchscreen controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    const: ti,am3359-tsc
+
+  ti,wires:
+    description: Wires refer to application modes i.e. 4/5/8 wire touchscreen
+      support on the platform.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [4, 5, 8]
+
+  ti,x-plate-resistance:
+    description: X plate resistance
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,coordinate-readouts:
+    description: The sequencer supports a total of 16 programmable steps. Each
+      step is used to read a single coordinate. A single readout is enough but
+      multiple reads can increase the quality. A value of 5 means, 5 reads for
+      X, 5 for Y and 2 for Z (always). This utilises 12 of the 16 software steps
+      available. The remaining 4 can be used by the ADC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 6
+
+  ti,wire-config:
+    description: Different boards could have a different order for connecting
+      wires on touchscreen. We need to provide an 8-bit number where the
+      first four bits represent the analog lines and the next 4 bits represent
+      positive/negative terminal on that input line. Notations to represent the
+      input lines and terminals respectively are as follows, AIN0 = 0, AIN1 = 1
+      and so on until AIN7 = 7. XP = 0, XN = 1, YP = 2, YN = 3.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 8
+
+  ti,charge-delay:
+    description: Length of touch screen charge delay step in terms of ADC clock
+      cycles. Charge delay value should be large in order to avoid false pen-up
+      events. This value effects the overall sampling speed, hence need to be
+      kept as low as possible, while avoiding false pen-up event. Start from a
+      lower value, say 0x400, and increase value until false pen-up events are
+      avoided. The pen-up detection happens immediately after the charge step,
+      so this does in fact function as a hardware knob for adjusting the amount
+      of "settling time".
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - ti,wires
+  - ti,x-plate-resistance
+  - ti,coordinate-readouts
+  - ti,wire-config
+
+additionalProperties: false
+
+examples:
+  - |
+    tsc {
+        compatible = "ti,am3359-tsc";
+        ti,wires = <4>;
+        ti,x-plate-resistance = <200>;
+        ti,coordinate-readouts = <5>;
+        ti,wire-config = <0x00 0x11 0x22 0x33>;
+        ti,charge-delay = <0x400>;
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
deleted file mode 100644
index aad5e34965eb..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-* TI - TSC ADC (Touschscreen and analog digital converter)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Required properties:
-- mfd
-	compatible: Should be
-		"ti,am3359-tscadc" for AM335x/AM437x SoCs
-		"ti,am654-tscadc", "ti,am3359-tscadc" for AM654 SoCs
-- child "tsc"
-	compatible: Should be "ti,am3359-tsc".
-	ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
-		  support on the platform.
-	ti,x-plate-resistance: X plate resistance
-	ti,coordinate-readouts: The sequencer supports a total of 16
-				programmable steps each step is used to
-				read a single coordinate. A single
-                                readout is enough but multiple reads can
-				increase the quality.
-				A value of 5 means, 5 reads for X, 5 for
-				Y and 2 for Z (always). This utilises 12
-				of the 16 software steps available. The
-				remaining 4 can be used by the ADC.
-	ti,wire-config: Different boards could have a different order for
-			connecting wires on touchscreen. We need to provide an
-			8 bit number where in the 1st four bits represent the
-			analog lines and the next 4 bits represent positive/
-			negative terminal on that input line. Notations to
-			represent the input lines and terminals resoectively
-			is as follows:
-			AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
-			XP  = 0, XN = 1, YP = 2, YN = 3.
-- child "adc"
-	compatible: Should be
-		    "ti,am3359-adc" for AM335x/AM437x SoCs
-		    "ti,am654-adc", "ti,am3359-adc" for AM654 SoCs
-	ti,adc-channels: List of analog inputs available for ADC.
-			 AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
-
-Optional properties:
-- child "tsc"
-	ti,charge-delay: Length of touch screen charge delay step in terms of
-			 ADC clock cycles. Charge delay value should be large
-			 in order to avoid false pen-up events. This value
-			 effects the overall sampling speed, hence need to be
-			 kept as low as possible, while avoiding false pen-up
-			 event. Start from a lower value, say 0x400, and
-			 increase value until false pen-up events are avoided.
-			 The pen-up detection happens immediately after the
-			 charge step, so this does in fact function as a
-			 hardware knob for adjusting the amount of "settling
-			 time".
-
-- child "adc"
-	ti,chan-step-opendelay: List of open delays for each channel of
-				ADC in the order of ti,adc-channels. The
-				value corresponds to the number of ADC
-				clock cycles to wait after applying the
-				step configuration registers and before
-				sending the start of ADC conversion.
-				Maximum value is 0x3FFFF.
-       ti,chan-step-sampledelay: List of sample delays for each channel
-				  of ADC in the order of ti,adc-channels.
-				  The value corresponds to the number of
-				  ADC clock cycles to sample (to hold
-				  start of conversion high).
-				  Maximum value is 0xFF.
-       ti,chan-step-avg: Number of averages to be performed for each
-			  channel of ADC. If average is 16 then input
-			  is sampled 16 times and averaged to get more
-			  accurate value. This increases the time taken
-			  by ADC to generate a sample. Valid range is 0
-			  average to 16 averages. Maximum value is 16.
-
-Example:
-	tscadc: tscadc@44e0d000 {
-		compatible = "ti,am3359-tscadc";
-		tsc {
-			ti,wires = <4>;
-			ti,x-plate-resistance = <200>;
-			ti,coordiante-readouts = <5>;
-			ti,wire-config = <0x00 0x11 0x22 0x33>;
-			ti,charge-delay = <0x400>;
-		};
-
-		adc {
-			ti,adc-channels = <4 5 6 7>;
-			ti,chan-step-opendelay = <0x098 0x3ffff 0x098 0x0>;
-			ti,chan-step-sampledelay = <0xff 0x0 0xf 0x0>;
-			ti,chan-step-avg = <16 2 4 8>;
-		};
-	}