Merge branch 'clk-unused' into clk-next

 - Remove efm32 clk driver
 - Remove tango4 clk driver
 - Remove zte zx clk driver
 - Remove sirf prima2/atlast clk drivers
 - Remove u300 clk driver

* clk-unused:
  clk: remove u300 driver
  clk: remove sirf prima2/atlas drivers
  clk: remove zte zx driver
  clk: remove tango4 driver
  clk: Drop unused efm32gg driver

6 files changed, 0 insertions, 302 deletions

diff --git a/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt b/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt
deleted file mode 100644
index 54d6d1358339..000000000000
--- a/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Clock and reset bindings for CSR atlas7
-
-Required properties:
-- compatible: Should be "sirf,atlas7-car"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- #reset-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-The ID list atlas7_clks defined in drivers/clk/sirf/clk-atlas7.c
-
-The reset consumer should specify the desired reset by having the reset
-ID in its "reset" phandle cell.
-The ID list atlas7_reset_unit defined in drivers/clk/sirf/clk-atlas7.c
-
-Examples: Clock and reset controller node:
-
-car: clock-controller@18620000 {
-	compatible = "sirf,atlas7-car";
-	reg = <0x18620000 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
-
-Examples: Consumers using clock or reset:
-
-timer@10dc0000 {
-	compatible = "sirf,macro-tick";
-	reg = <0x10dc0000 0x1000>;
-	clocks = <&car 54>;
-	interrupts = <0 0 0>,
-		   <0 1 0>,
-		   <0 2 0>,
-		   <0 49 0>,
-		   <0 50 0>,
-		   <0 51 0>;
-};
-
-uart1: uart@18020000 {
-	cell-index = <1>;
-	compatible = "sirf,macro-uart";
-	reg = <0x18020000 0x1000>;
-	clocks = <&clks 95>;
-	interrupts = <0 18 0>;
-	fifosize = <32>;
-};
-
-vpp@13110000 {
-	compatible = "sirf,prima2-vpp";
-	reg = <0x13110000 0x10000>;
-	interrupts = <0 31 0>;
-	clocks = <&car 85>;
-	resets = <&car 29>;
-};
diff --git a/Documentation/devicetree/bindings/clock/prima2-clock.txt b/Documentation/devicetree/bindings/clock/prima2-clock.txt
deleted file mode 100644
index 5016979c0f78..000000000000
--- a/Documentation/devicetree/bindings/clock/prima2-clock.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Clock bindings for CSR SiRFprimaII
-
-Required properties:
-- compatible: Should be "sirf,prima2-clkc"
-- reg: Address and length of the register set
-- interrupts: Should contain clock controller interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of prima2
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	rtc			0
-	osc             	1
-	pll1            	2
-	pll2            	3
-	pll3            	4
-	mem             	5
-	sys             	6
-	security        	7
-	dsp             	8
-	gps             	9
-	mf              	10
-	io              	11
-	cpu             	12
-	uart0           	13
-	uart1           	14
-	uart2           	15
-	tsc             	16
-	i2c0            	17
-	i2c1            	18
-	spi0            	19
-	spi1            	20
-	pwmc            	21
-	efuse           	22
-	pulse           	23
-	dmac0           	24
-	dmac1           	25
-	nand            	26
-	audio           	27
-	usp0            	28
-	usp1            	29
-	usp2            	30
-	vip             	31
-	gfx             	32
-	mm              	33
-	lcd             	34
-	vpp             	35
-	mmc01           	36
-	mmc23           	37
-	mmc45           	38
-	usbpll          	39
-	usb0            	40
-	usb1			41
-
-Examples:
-
-clks: clock-controller@88000000 {
-	compatible = "sirf,prima2-clkc";
-	reg = <0x88000000 0x1000>;
-	interrupts = <3>;
-	#clock-cells = <1>;
-};
-
-i2c0: i2c@b00e0000 {
-	cell-index = <0>;
-	compatible = "sirf,prima2-i2c";
-	reg = <0xb00e0000 0x10000>;
-	interrupts = <24>;
-	clocks = <&clks 17>;
-};
diff --git a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
deleted file mode 100644
index 7cafcb98ead7..000000000000
--- a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Clock bindings for ST-Ericsson U300 System Controller Clocks
-
-Bindings for the gated system controller clocks:
-
-Required properties:
-- compatible: must be "stericsson,u300-syscon-clk"
-- #clock-cells: must be <0>
-- clock-type: specifies the type of clock:
-  0 = slow clock
-  1 = fast clock
-  2 = rest/remaining clock
-- clock-id: specifies the clock in the type range
-
-Optional properties:
-- clocks: parent clock(s)
-
-The available clocks per type are as follows:
-
-Type:  ID:   Clock:
--------------------
-0      0     Slow peripheral bridge clock
-0      1     UART0 clock
-0      4     GPIO clock
-0      6     RTC clock
-0      7     Application timer clock
-0      8     Access timer clock
-
-1      0     Fast peripheral bridge clock
-1      1     I2C bus 0 clock
-1      2     I2C bus 1 clock
-1      5     MMC interface peripheral (silicon) clock
-1      6     SPI clock
-
-2      3     CPU clock
-2      4     DMA controller clock
-2      5     External Memory Interface (EMIF) clock
-2      6     NAND flask interface clock
-2      8     XGAM graphics engine clock
-2      9     Shared External Memory Interface (SEMI) clock
-2      10    AHB Subsystem Bridge clock
-2      12    Interrupt controller clock
-
-Example:
-
-gpio_clk: gpio_clk@13M {
-	#clock-cells = <0>;
-	compatible = "stericsson,u300-syscon-clk";
-	clock-type = <0>; /* Slow */
-	clock-id = <4>;
-	clocks = <&slow_clk>;
-};
-
-gpio: gpio@c0016000 {
-	compatible = "stericsson,gpio-coh901";
-	(...)
-	clocks = <&gpio_clk>;
-};
-
-
-Bindings for the MMC/SD card clock:
-
-Required properties:
-- compatible: must be "stericsson,u300-syscon-mclk"
-- #clock-cells: must be <0>
-
-Optional properties:
-- clocks: parent clock(s)
-
-mmc_mclk: mmc_mclk {
-	#clock-cells = <0>;
-	compatible = "stericsson,u300-syscon-mclk";
-	clocks = <&mmc_pclk>;
-};
-
-mmcsd: mmcsd@c0001000 {
-	compatible = "arm,pl18x", "arm,primecell";
-	clocks = <&mmc_pclk>, <&mmc_mclk>;
-	clock-names = "apb_pclk", "mclk";
-	(...)
-};
diff --git a/Documentation/devicetree/bindings/clock/tango4-clock.txt b/Documentation/devicetree/bindings/clock/tango4-clock.txt
deleted file mode 100644
index 19c580a7bda2..000000000000
--- a/Documentation/devicetree/bindings/clock/tango4-clock.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Sigma Designs Tango4 Clock Generator
-
-The Tango4 clock generator outputs cpu_clk and sys_clk (the latter is used
-for RAM and various peripheral devices). The clock binding described here
-is applicable to all Tango4 SoCs.
-
-Required Properties:
-
-- compatible: should be "sigma,tango4-clkgen".
-- reg: physical base address of the device and length of memory mapped region.
-- clocks: phandle of the input clock (crystal oscillator).
-- clock-output-names: should be "cpuclk" and "sysclk".
-- #clock-cells: should be set to 1.
-
-Example:
-
-	clkgen: clkgen@10000 {
-		compatible = "sigma,tango4-clkgen";
-		reg = <0x10000 0x40>;
-		clocks = <&xtal>;
-		clock-output-names = "cpuclk", "sysclk";
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt
deleted file mode 100644
index 5c91c9e4f1be..000000000000
--- a/Documentation/devicetree/bindings/clock/zx296702-clk.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Device Tree Clock bindings for ZTE zx296702
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"zte,zx296702-topcrm-clk":
-		zx296702 top clock selection, divider and gating
-
-	"zte,zx296702-lsp0crpm-clk" and
-	"zte,zx296702-lsp1crpm-clk":
-		zx296702 device level clock selection and gating
-
-- reg: Address and length of the register set
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
-for the full list of zx296702 clock IDs.
-
-
-topclk: topcrm@09800000 {
-        compatible = "zte,zx296702-topcrm-clk";
-        reg = <0x09800000 0x1000>;
-        #clock-cells = <1>;
-};
-
-uart0: serial@09405000 {
-        compatible = "zte,zx296702-uart";
-        reg = <0x09405000 0x1000>;
-        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&lsp1clk ZX296702_UART0_PCLK>;
-};
diff --git a/Documentation/devicetree/bindings/clock/zx296718-clk.txt b/Documentation/devicetree/bindings/clock/zx296718-clk.txt
deleted file mode 100644
index 3a46bf0b2540..000000000000
--- a/Documentation/devicetree/bindings/clock/zx296718-clk.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Device Tree Clock bindings for ZTE zx296718
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"zte,zx296718-topcrm":
-		zx296718 top clock selection, divider and gating
-
-	"zte,zx296718-lsp0crm" and
-	"zte,zx296718-lsp1crm":
-		zx296718 device level clock selection and gating
-
-	"zte,zx296718-audiocrm":
-		zx296718 audio clock selection, divider and gating
-
-- reg: Address and length of the register set
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296718-clock.h
-for the full list of zx296718 clock IDs.
-
-
-topclk: topcrm@1461000 {
-        compatible = "zte,zx296718-topcrm-clk";
-        reg = <0x01461000 0x1000>;
-        #clock-cells = <1>;
-};
-
-usbphy0:usb-phy0 {
-	compatible = "zte,zx296718-usb-phy";
-	#phy-cells = <0>;
-	clocks = <&topclk USB20_PHY_CLK>;
-	clock-names = "phyclk";
-};