diff options
| author | Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> | 2014-03-18 07:49:14 +0900 |
|---|---|---|
| committer | Kukjin Kim <kgene.kim@samsung.com> | 2014-03-18 07:49:14 +0900 |
| commit | ba0d7ed391b7b3fb5ca98d9cf4d067b7f5ed956b (patch) | |
| tree | c4ef7983ba455208a9952b39046f9344708efd25 /Documentation/devicetree/bindings/ata/exynos-sata.txt | |
| parent | 183af2522da5d02fd1d682e105ee4d60a685c05e (diff) | |
| download | linux-ba0d7ed391b7b3fb5ca98d9cf4d067b7f5ed956b.tar.bz2 | |
ARM: dts: enable ahci sata and sata phy for exynos5250
This patch adds dt entry for ahci sata controller and its
corresponding phy controller.phy node has been added w.r.t
new generic phy framework.
Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Diffstat (limited to 'Documentation/devicetree/bindings/ata/exynos-sata.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/ata/exynos-sata.txt | 25 |
1 files changed, 16 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt b/Documentation/devicetree/bindings/ata/exynos-sata.txt index 0849f1025e34..b2adb1f3090e 100644 --- a/Documentation/devicetree/bindings/ata/exynos-sata.txt +++ b/Documentation/devicetree/bindings/ata/exynos-sata.txt @@ -4,14 +4,21 @@ SATA nodes are defined to describe on-chip Serial ATA controllers. Each SATA controller should have its own node. Required properties: -- compatible : compatible list, contains "samsung,exynos5-sata" -- interrupts : <interrupt mapping for SATA IRQ> -- reg : <registers mapping> -- samsung,sata-freq : <frequency in MHz> +- compatible : compatible list, contains "samsung,exynos5-sata" +- interrupts : <interrupt mapping for SATA IRQ> +- reg : <registers mapping> +- samsung,sata-freq : <frequency in MHz> +- phys : as mentioned in phy-bindings.txt +- phy-names : as mentioned in phy-bindings.txt Example: - sata@ffe08000 { - compatible = "samsung,exynos5-sata"; - reg = <0xffe08000 0x1000>; - interrupts = <115>; - }; + sata@122f0000 { + compatible = "snps,dwc-ahci"; + samsung,sata-freq = <66>; + reg = <0x122f0000 0x1ff>; + interrupts = <0 115 0>; + clocks = <&clock 277>, <&clock 143>; + clock-names = "sata", "sclk_sata"; + phys = <&sata_phy>; + phy-names = "sata-phy"; + }; |