diff options
| author | Peter Ujfalusi <peter.ujfalusi@ti.com> | 2014-09-04 10:52:53 +0300 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2014-09-04 12:44:49 +0100 |
| commit | fe0a29e163a5d045c73faab682a8dac71c2f8012 (patch) | |
| tree | f05c31e2c83900d3a7881b8834563e464c23cb43 | |
| parent | 7d1311b93e58ed55f3a31cc8f94c4b8fe988a2b9 (diff) | |
| download | linux-fe0a29e163a5d045c73faab682a8dac71c2f8012.tar.bz2 | |
ASoC: davinci-mcasp: Correct rx format unit configuration
In case of capture we should not use rotation. The reverse and mask is
enough to get the data align correctly from the bus to MCU:
Format data from bus after reverse (XRBUF)
S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB|
S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB|
S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB|
S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB|
With this patch all supported formats will work for playback and capture.
Reported-by: Jyri Sarha <jsarha@ti.com> (broken S24_3LE capture)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
| -rw-r--r-- | sound/soc/davinci/davinci-mcasp.c | 11 |
1 files changed, 10 insertions, 1 deletions
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index c28508da34cf..0062601a63c2 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -459,8 +459,17 @@ static int davinci_config_channel_size(struct davinci_mcasp *mcasp, { u32 fmt; u32 tx_rotate = (word_length / 4) & 0x7; - u32 rx_rotate = (32 - word_length) / 4; u32 mask = (1ULL << word_length) - 1; + /* + * For captured data we should not rotate, inversion and masking is + * enoguh to get the data to the right position: + * Format data from bus after reverse (XRBUF) + * S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB| + * S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| + * S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| + * S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB| + */ + u32 rx_rotate = 0; /* * if s BCLK-to-LRCLK ratio has been configured via the set_clkdiv() |