summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRichard Leitner <richard.leitner@skidata.com>2017-03-06 09:24:22 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2017-03-09 10:34:16 +0100
commitfa56fe4ca4a1e4d9715f144857c98074e41bc94f (patch)
tree0d425e67086ea8e93723883e3e6e073e66b53d44
parent7f7d8ba3b2140d993887a7db7a83d85c1f8db0e8 (diff)
downloadlinux-fa56fe4ca4a1e4d9715f144857c98074e41bc94f.tar.bz2
doc: dt-bindings: usb251xb: mark reg as required
Mark the reg property as required and furthermore fix some typos and spellings in the documentation. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r--Documentation/devicetree/bindings/usb/usb251xb.txt23
1 files changed, 12 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 91499ae028db..3957d4edaa74 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -7,18 +7,18 @@ Required properties :
- compatible : Should be "microchip,usb251xb" or one of the specific types:
"microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b",
"microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi"
- - hub-reset-gpios : Should specify the gpio for hub reset
+ - reset-gpios : Should specify the gpio for hub reset
+ - reg : I2C address on the selected bus (default is <0x2C>)
Optional properties :
- - reg : I2C address on the selected bus (default is <0x2C>)
- skip-config : Skip Hub configuration, but only send the USB-Attach command
- - vendor-id : USB Vendor ID of the hub (16 bit, default is 0x0424)
- - product-id : USB Product ID of the hub (16 bit, default depends on type)
- - device-id : USB Device ID of the hub (16 bit, default is 0x0bb3)
- - language-id : USB Language ID (16 bit, default is 0x0000)
- - manufacturer : USB Manufacturer string (max 31 characters long)
- - product : USB Product string (max 31 characters long)
- - serial : USB Serial string (max 31 characters long)
+ - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
+ - product-id : Set USB Product ID of the hub (16 bit, default depends on type)
+ - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3)
+ - language-id : Set USB Language ID (16 bit, default is 0x0000)
+ - manufacturer : Set USB Manufacturer string (max 31 characters long)
+ - product : Set USB Product string (max 31 characters long)
+ - serial : Set USB Serial string (max 31 characters long)
- {bus,self}-powered : selects between self- and bus-powered operation (default
is self-powered)
- disable-hi-speed : disable USB Hi-Speed support
@@ -34,7 +34,7 @@ Optional properties :
- oc-delay-us : Delay time (in microseconds) for filtering the over-current
sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If
an invalid value is given, the default is used instead.
- - compound-device : indicated the hub is part of a compound device
+ - compound-device : indicate the hub is part of a compound device
- port-mapping-mode : enable port mapping mode
- string-support : enable string descriptor support (required for manufacturer,
product and serial string configuration)
@@ -49,7 +49,8 @@ Optional properties :
Examples:
usb2512b@2c {
compatible = "microchip,usb2512b";
- hub-reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ reg = <0x2c>;
+ reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
usb2514b@2c {