summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAndy Walls <awalls@radix.net>2010-01-03 23:28:18 -0300
committerMauro Carvalho Chehab <mchehab@redhat.com>2010-02-26 15:10:30 -0300
commitf05b7f5ee19de6de972020ea18e6c30b672d401b (patch)
tree7e51166d129f564784672186a7217b94cb75e770
parenta8073119d69d0b4aa8f445ed4d7d56b89b602708 (diff)
downloadlinux-f05b7f5ee19de6de972020ea18e6c30b672d401b.tar.bz2
V4L/DVB (13913): saa7127: Add support for generating SECAM output for the SAA712[89] chips
This change fixes up saa7127_s_std() generate SECAM out, if the user has requested a 50 Hz video standard set that only contains a request for SECAM standards and not PAL. Only the SAA712[89] chips can generate SECAM, the SAA712[67] chips cannot. I was unclear on the burst start and end values - I couldn't figure out the units - so I left them the same as for the PAL systems. A the video decoders on both a PVR-350 (SAA7115) and an HVR-1600 (CX23418) identify the SECAM signal generated by a SAA7129 with this patch as SECAM. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-rw-r--r--drivers/media/video/saa7127.c47
1 files changed, 40 insertions, 7 deletions
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index 2fe7a701b954..250ef84cf5ca 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -181,7 +181,7 @@ static const struct i2c_reg_value saa7127_init_config_common[] = {
#define SAA7127_60HZ_DAC_CONTROL 0x15
static const struct i2c_reg_value saa7127_init_config_60hz[] = {
{ SAA7127_REG_BURST_START, 0x19 },
- /* BURST_END is also used as a chip ID in saa7127_detect_client */
+ /* BURST_END is also used as a chip ID in saa7127_probe */
{ SAA7127_REG_BURST_END, 0x1d },
{ SAA7127_REG_CHROMA_PHASE, 0xa3 },
{ SAA7127_REG_GAINU, 0x98 },
@@ -200,10 +200,10 @@ static const struct i2c_reg_value saa7127_init_config_60hz[] = {
{ 0, 0 }
};
-#define SAA7127_50HZ_DAC_CONTROL 0x02
-static struct i2c_reg_value saa7127_init_config_50hz[] = {
+#define SAA7127_50HZ_PAL_DAC_CONTROL 0x02
+static struct i2c_reg_value saa7127_init_config_50hz_pal[] = {
{ SAA7127_REG_BURST_START, 0x21 },
- /* BURST_END is also used as a chip ID in saa7127_detect_client */
+ /* BURST_END is also used as a chip ID in saa7127_probe */
{ SAA7127_REG_BURST_END, 0x1d },
{ SAA7127_REG_CHROMA_PHASE, 0x3f },
{ SAA7127_REG_GAINU, 0x7d },
@@ -222,6 +222,28 @@ static struct i2c_reg_value saa7127_init_config_50hz[] = {
{ 0, 0 }
};
+#define SAA7127_50HZ_SECAM_DAC_CONTROL 0x08
+static struct i2c_reg_value saa7127_init_config_50hz_secam[] = {
+ { SAA7127_REG_BURST_START, 0x21 },
+ /* BURST_END is also used as a chip ID in saa7127_probe */
+ { SAA7127_REG_BURST_END, 0x1d },
+ { SAA7127_REG_CHROMA_PHASE, 0x3f },
+ { SAA7127_REG_GAINU, 0x6a },
+ { SAA7127_REG_GAINV, 0x81 },
+ { SAA7127_REG_BLACK_LEVEL, 0x33 },
+ { SAA7127_REG_BLANKING_LEVEL, 0x35 },
+ { SAA7127_REG_VBI_BLANKING, 0x35 },
+ { SAA7127_REG_DAC_CONTROL, 0x08 },
+ { SAA7127_REG_BURST_AMP, 0x2f },
+ { SAA7127_REG_SUBC3, 0xb2 },
+ { SAA7127_REG_SUBC2, 0x3b },
+ { SAA7127_REG_SUBC1, 0xa3 },
+ { SAA7127_REG_SUBC0, 0x28 },
+ { SAA7127_REG_MULTI, 0x90 },
+ { SAA7127_REG_CLOSED_CAPTION, 0x00 },
+ { 0, 0 }
+};
+
/*
**********************************************************************
*
@@ -463,10 +485,21 @@ static int saa7127_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
v4l2_dbg(1, debug, sd, "Selecting 60 Hz video Standard\n");
inittab = saa7127_init_config_60hz;
state->reg_61 = SAA7127_60HZ_DAC_CONTROL;
+
+ } else if (state->ident == V4L2_IDENT_SAA7129 &&
+ (std & V4L2_STD_SECAM) &&
+ !(std & (V4L2_STD_625_50 & ~V4L2_STD_SECAM))) {
+
+ /* If and only if SECAM, with a SAA712[89] */
+ v4l2_dbg(1, debug, sd,
+ "Selecting 50 Hz SECAM video Standard\n");
+ inittab = saa7127_init_config_50hz_secam;
+ state->reg_61 = SAA7127_50HZ_SECAM_DAC_CONTROL;
+
} else {
- v4l2_dbg(1, debug, sd, "Selecting 50 Hz video Standard\n");
- inittab = saa7127_init_config_50hz;
- state->reg_61 = SAA7127_50HZ_DAC_CONTROL;
+ v4l2_dbg(1, debug, sd, "Selecting 50 Hz PAL video Standard\n");
+ inittab = saa7127_init_config_50hz_pal;
+ state->reg_61 = SAA7127_50HZ_PAL_DAC_CONTROL;
}
/* Write Table */