diff options
| author | Chunyan Zhang <zhang.chunyan@linaro.org> | 2018-08-30 16:21:41 +0800 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2018-10-08 11:40:43 +0200 |
| commit | e65953d4a117a6e1d8a7abf9b59c0968da95dd6b (patch) | |
| tree | 06c6e1663a122f69f63956689d96b8957380ff13 | |
| parent | 685e444bbaa0a5ed959f39dbb2f219eb44c30421 (diff) | |
| download | linux-e65953d4a117a6e1d8a7abf9b59c0968da95dd6b.tar.bz2 | |
mmc: sdhci: Add 32-bit block count support for v4 mode
Host Controller Version 4.10 re-defines SDMA System Address register
as 32-bit Block Count for v4 mode, and SDMA uses ADMA System
Address register (05Fh-058h) instead if v4 mode is enabled. Also
when using 32-bit block count, 16-bit block count register need
to be set to zero.
Since using 32-bit Block Count would cause problems for auto-cmd23,
it can be chosen via host->quirk2.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 14 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci.h | 8 |
2 files changed, 21 insertions, 1 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 63bc74ae2f66..bd6426036c89 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1082,7 +1082,19 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) /* Set the DMA boundary value and block size */ sdhci_writew(host, SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz), SDHCI_BLOCK_SIZE); - sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); + + /* + * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count + * can be supported, in that case 16-bit block count register must be 0. + */ + if (host->version >= SDHCI_SPEC_410 && host->v4_mode && + (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) { + if (sdhci_readw(host, SDHCI_BLOCK_COUNT)) + sdhci_writew(host, 0, SDHCI_BLOCK_COUNT); + sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT); + } else { + sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); + } } static inline bool sdhci_auto_cmd12(struct sdhci_host *host, diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 33807fed6b45..9b653136605f 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -28,6 +28,7 @@ #define SDHCI_DMA_ADDRESS 0x00 #define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS +#define SDHCI_32BIT_BLK_CNT SDHCI_DMA_ADDRESS #define SDHCI_BLOCK_SIZE 0x04 #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) @@ -462,6 +463,13 @@ struct sdhci_host { * obtainable timeout. */ #define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17) +/* + * 32-bit block count may not support eMMC where upper bits of CMD23 are used + * for other purposes. Consequently we support 16-bit block count by default. + * Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit + * block count. + */ +#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18) int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ |