summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorFaiz Abbas <faiz_abbas@ti.com>2019-04-01 18:28:04 +0530
committerUlf Hansson <ulf.hansson@linaro.org>2019-04-15 11:55:54 +0200
commite374e87538f4c7cd364bce6b9048ad5829ccc604 (patch)
treea0004296e8224632bf68fc376b527b05ff9f980f
parent3b407b4f3a9273467a6b3d6a640948a739794950 (diff)
downloadlinux-e374e87538f4c7cd364bce6b9048ad5829ccc604.tar.bz2
mmc: sdhci_am654: Clear HISPD_ENA in some lower speed modes
According to the AM654x Data Manual[1], the setup timing in lower speed modes can only be met if the controller uses a falling edge data launch. To ensure this, the HIGH_SPEED_ENA (HOST_CONTROL[2]) bit should be cleared in default speed, SD high speed, MMC high speed, SDR12 and SDR25 speed modes. Use the sdhci writeb callback to implement this condition. [1] http://www.ti.com/lit/gpn/am6546 Section 5.10.5.16.1 Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-rw-r--r--drivers/mmc/host/Kconfig1
-rw-r--r--drivers/mmc/host/sdhci_am654.c22
2 files changed, 23 insertions, 0 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index de7a38dab2aa..9c01310a0d2e 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -994,6 +994,7 @@ config MMC_SDHCI_OMAP
config MMC_SDHCI_AM654
tristate "Support for the SDHCI Controller in TI's AM654 SOCs"
depends on MMC_SDHCI_PLTFM && OF
+ select MMC_SDHCI_IO_ACCESSORS
help
This selects the Secure Digital Host Controller Interface (SDHCI)
support present in TI's AM654 SOCs. The controller supports
diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index eea183e90f1b..a91c0b45c48d 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -158,6 +158,27 @@ static void sdhci_am654_set_power(struct sdhci_host *host, unsigned char mode,
sdhci_set_power_noreg(host, mode, vdd);
}
+static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
+{
+ unsigned char timing = host->mmc->ios.timing;
+
+ if (reg == SDHCI_HOST_CONTROL) {
+ switch (timing) {
+ /*
+ * According to the data manual, HISPD bit
+ * should not be set in these speed modes.
+ */
+ case MMC_TIMING_SD_HS:
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_UHS_SDR12:
+ case MMC_TIMING_UHS_SDR25:
+ val &= ~SDHCI_CTRL_HISPD;
+ }
+ }
+
+ writeb(val, host->ioaddr + reg);
+}
+
static struct sdhci_ops sdhci_am654_ops = {
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
@@ -165,6 +186,7 @@ static struct sdhci_ops sdhci_am654_ops = {
.set_bus_width = sdhci_set_bus_width,
.set_power = sdhci_am654_set_power,
.set_clock = sdhci_am654_set_clock,
+ .write_b = sdhci_am654_write_b,
.reset = sdhci_reset,
};