mt76: sdio: extend sdio module to support CONNAC2

Extend sdio module to support CONNAC2 hw that mt7921s rely on.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

5 files changed, 53 insertions, 6 deletions

diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index a3fc0c920f46..85afe05d7f30 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -506,6 +506,7 @@ struct mt76_sdio {
 
 	struct sdio_func *func;
 	void *intr_data;
+	u8 hw_ver;
 
 	struct {
 		int pse_data_quota;
@@ -1253,7 +1254,8 @@ int mt76s_alloc_tx(struct mt76_dev *dev);
 void mt76s_deinit(struct mt76_dev *dev);
 void mt76s_sdio_irq(struct sdio_func *func);
 void mt76s_txrx_worker(struct mt76_sdio *sdio);
-int mt76s_hw_init(struct mt76_dev *dev, struct sdio_func *func);
+int mt76s_hw_init(struct mt76_dev *dev, struct sdio_func *func,
+		  int hw_ver);
 u32 mt76s_rr(struct mt76_dev *dev, u32 offset);
 void mt76s_wr(struct mt76_dev *dev, u32 offset, u32 val);
 u32 mt76s_rmw(struct mt76_dev *dev, u32 offset, u32 mask, u32 val);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/sdio.c b/drivers/net/wireless/mediatek/mt76/mt7615/sdio.c
index 8d23dd4d5457..31c4a76b7f91 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/sdio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/sdio.c
@@ -120,7 +120,7 @@ static int mt7663s_probe(struct sdio_func *func,
 	if (ret < 0)
 		goto error;
 
-	ret = mt76s_hw_init(mdev, func);
+	ret = mt76s_hw_init(mdev, func, MT76_CONNAC_SDIO);
 	if (ret)
 		goto error;
 
diff --git a/drivers/net/wireless/mediatek/mt76/sdio.c b/drivers/net/wireless/mediatek/mt76/sdio.c
index 7e613462b60e..c99acc21225e 100644
--- a/drivers/net/wireless/mediatek/mt76/sdio.c
+++ b/drivers/net/wireless/mediatek/mt76/sdio.c
@@ -221,11 +221,13 @@ int mt76s_rd_rp(struct mt76_dev *dev, u32 base,
 }
 EXPORT_SYMBOL_GPL(mt76s_rd_rp);
 
-int mt76s_hw_init(struct mt76_dev *dev, struct sdio_func *func)
+int mt76s_hw_init(struct mt76_dev *dev, struct sdio_func *func, int hw_ver)
 {
 	u32 status, ctrl;
 	int ret;
 
+	dev->sdio.hw_ver = hw_ver;
+
 	sdio_claim_host(func);
 
 	ret = sdio_enable_func(func);
@@ -255,12 +257,27 @@ int mt76s_hw_init(struct mt76_dev *dev, struct sdio_func *func)
 		goto disable_func;
 
 	ctrl = WHIER_RX0_DONE_INT_EN | WHIER_TX_DONE_INT_EN;
+	if (hw_ver == MT76_CONNAC2_SDIO)
+		ctrl |= WHIER_RX1_DONE_INT_EN;
 	sdio_writel(func, ctrl, MCR_WHIER, &ret);
 	if (ret < 0)
 		goto disable_func;
 
-	/* set WHISR as read clear and Rx aggregation number as 16 */
-	ctrl = FIELD_PREP(MAX_HIF_RX_LEN_NUM, 16);
+	switch (hw_ver) {
+	case MT76_CONNAC_SDIO:
+		/* set WHISR as read clear and Rx aggregation number as 16 */
+		ctrl = FIELD_PREP(MAX_HIF_RX_LEN_NUM, 16);
+		break;
+	default:
+		ctrl = sdio_readl(func, MCR_WHCR, &ret);
+		if (ret < 0)
+			goto disable_func;
+		ctrl &= ~MAX_HIF_RX_LEN_NUM_CONNAC2;
+		ctrl &= ~W_INT_CLR_CTRL; /* read clear */
+		ctrl |= FIELD_PREP(MAX_HIF_RX_LEN_NUM_CONNAC2, 0);
+		break;
+	}
+
 	sdio_writel(func, ctrl, MCR_WHCR, &ret);
 	if (ret < 0)
 		goto disable_func;
diff --git a/drivers/net/wireless/mediatek/mt76/sdio.h b/drivers/net/wireless/mediatek/mt76/sdio.h
index dfcba5e3786c..99db4ad93b7c 100644
--- a/drivers/net/wireless/mediatek/mt76/sdio.h
+++ b/drivers/net/wireless/mediatek/mt76/sdio.h
@@ -21,7 +21,12 @@
 #define MCR_WHCR			0x000C
 #define W_INT_CLR_CTRL			BIT(1)
 #define RECV_MAILBOX_RD_CLR_EN		BIT(2)
+#define WF_SYS_RSTB			BIT(4) /* supported in CONNAC2 */
+#define WF_WHOLE_PATH_RSTB		BIT(5) /* supported in CONNAC2 */
+#define WF_SDIO_WF_PATH_RSTB		BIT(6) /* supported in CONNAC2 */
 #define MAX_HIF_RX_LEN_NUM		GENMASK(13, 8)
+#define MAX_HIF_RX_LEN_NUM_CONNAC2	GENMASK(14, 8) /* supported in CONNAC2 */
+#define WF_RST_DONE			BIT(15) /* supported in CONNAC2 */
 #define RX_ENHANCE_MODE			BIT(16)
 
 #define MCR_WHISR			0x0010
@@ -29,6 +34,7 @@
 #define WHIER_D2H_SW_INT		GENMASK(31, 8)
 #define WHIER_FW_OWN_BACK_INT_EN	BIT(7)
 #define WHIER_ABNORMAL_INT_EN		BIT(6)
+#define WHIER_WDT_INT_EN		BIT(5) /* supported in CONNAC2 */
 #define WHIER_RX1_DONE_INT_EN		BIT(2)
 #define WHIER_RX0_DONE_INT_EN		BIT(1)
 #define WHIER_TX_DONE_INT_EN		BIT(0)
@@ -100,6 +106,23 @@
 
 #define MCR_SWPCDBGR			0x0154
 
+#define MCR_H2DSM2R			0x0160 /* supported in CONNAC2 */
+#define MCR_H2DSM3R			0x0164 /* supported in CONNAC2 */
+#define MCR_D2HRM3R			0x0174 /* supported in CONNAC2 */
+#define MCR_WTQCR8			0x0190 /* supported in CONNAC2 */
+#define MCR_WTQCR9			0x0194 /* supported in CONNAC2 */
+#define MCR_WTQCR10			0x0198 /* supported in CONNAC2 */
+#define MCR_WTQCR11			0x019C /* supported in CONNAC2 */
+#define MCR_WTQCR12			0x01A0 /* supported in CONNAC2 */
+#define MCR_WTQCR13			0x01A4 /* supported in CONNAC2 */
+#define MCR_WTQCR14			0x01A8 /* supported in CONNAC2 */
+#define MCR_WTQCR15			0x01AC /* supported in CONNAC2 */
+
+enum mt76_connac_sdio_ver {
+	MT76_CONNAC_SDIO,
+	MT76_CONNAC2_SDIO,
+};
+
 struct mt76s_intr {
 	u32 isr;
 	u32 *rec_mb;
diff --git a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
index f94de48ebadc..2728d45a2e61 100644
--- a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
+++ b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
@@ -112,8 +112,10 @@ mt76s_rx_run_queue(struct mt76_dev *dev, enum mt76_rxq_id qid,
 	for (i = 0; i < intr->rx.num[qid]; i++) {
 		int index = (q->head + i) % q->ndesc;
 		struct mt76_queue_entry *e = &q->entry[index];
+		__le32 *rxd = (__le32 *)buf;
 
-		len = intr->rx.len[qid][i];
+		/* parse rxd to get the actual packet length */
+		len = FIELD_GET(GENMASK(15, 0), le32_to_cpu(rxd[0]));
 		e->skb = mt76s_build_rx_skb(buf, len, round_up(len + 4, 4));
 		if (!e->skb)
 			break;
@@ -173,6 +175,9 @@ mt76s_tx_pick_quota(struct mt76_sdio *sdio, bool mcu, int buf_sz,
 
 	pse_sz = DIV_ROUND_UP(buf_sz + sdio->sched.deficit, MT_PSE_PAGE_SZ);
 
+	if (mcu && sdio->hw_ver == MT76_CONNAC2_SDIO)
+		pse_sz = 1;
+
 	if (mcu) {
 		if (sdio->sched.pse_mcu_quota < *pse_size + pse_sz)
 			return -EBUSY;