diff options
| author | Pavel Machek <pavel@ucw.cz> | 2017-08-10 22:49:23 +0200 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2017-08-14 11:34:25 -0700 |
| commit | d510d12f26f49905d53ab550fcb40e848a01a60e (patch) | |
| tree | 912857c6b7d9391bde46041f6339383eff708bb8 | |
| parent | 895bd4b3e5ec4c7d5babee0a0ada2f22d7b6df31 (diff) | |
| download | linux-d510d12f26f49905d53ab550fcb40e848a01a60e.tar.bz2 | |
ARM: dts: nokia n900: update dts with camera support
Add camera support to N900 dts. Also add a note about MMC & debugging.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
| -rw-r--r-- | arch/arm/boot/dts/omap3-n900.dts | 87 |
1 files changed, 87 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 92c1f4ac4040..26c20e1167b9 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -144,6 +144,15 @@ io-channel-names = "temp", "bsi", "vbat"; }; + rear_camera: camera@0 { + compatible = "linux,camera"; + + module { + model = "TCM8341MD"; + sensor = <&cam1>; + }; + }; + pwm9: dmtimer-pwm { compatible = "ti,omap-dmtimer-pwm"; #pwm-cells = <3>; @@ -164,6 +173,31 @@ }; }; +&isp { + vdds_csib-supply = <&vaux2>; + + pinctrl-names = "default"; + pinctrl-0 = <&camera_pins>; + + ports { + port@1 { + reg = <1>; + + csi_isp: endpoint { + remote-endpoint = <&csi_cam1>; + bus-type = <3>; /* CCP2 */ + clock-lanes = <1>; + data-lanes = <0>; + lane-polarity = <0 0>; + clock-inv = <0>; + /* Select strobe = <1> for back camera, <0> for front camera */ + strobe = <1>; + crc = <0>; + }; + }; + }; +}; + &omap3_pmx_core { pinctrl-names = "default"; @@ -328,6 +362,22 @@ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ >; }; + + camera_pins: pinmux_camera { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7) /* cam_hs */ + OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7) /* cam_vs */ + OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */ + OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7) /* cam_d4 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7 */ + OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0) /* cam_d8 */ + OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0) /* cam_d9 */ + OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7) /* cam_d10 */ + OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7) /* cam_xclkb */ + OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0) /* cam_strobe */ + >; + }; }; &i2c1 { @@ -726,6 +776,40 @@ st,max-limit-y = <32>; st,max-limit-z = <32>; }; + + cam1: camera@3e { + compatible = "toshiba,et8ek8"; + reg = <0x3e>; + + vana-supply = <&vaux4>; + + clocks = <&isp 0>; + clock-names = "extclk"; + clock-frequency = <9600000>; + + reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ + + port { + csi_cam1: endpoint { + bus-type = <3>; /* CCP2 */ + strobe = <1>; + clock-inv = <0>; + crc = <1>; + + remote-endpoint = <&csi_isp>; + }; + }; + }; + + /* D/A converter for auto-focus */ + ad5820: dac@0c { + compatible = "adi,ad5820"; + reg = <0x0c>; + + VANA-supply = <&vaux4>; + + #io-channel-cells = <0>; + }; }; &mmc1 { @@ -733,6 +817,9 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; bus-width = <4>; + /* For debugging, it is often good idea to remove this GPIO. + It means you can remove back cover (to reboot by removing + battery) and still use the MMC card. */ cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ }; |